fix PLA Matte temperature

fix some bug
version update
2026-01-31 17:08:41 +03:00 · 2024-12-03 11:05:10 +08:00 · 2024-11-30 14:00:32 +08:00 · 2024-11-28 15:28:37 +08:00 · 2024-11-28 15:26:22 +08:00 · 2024-11-28 15:23:54 +08:00
1092 changed files with 98296 additions and 31949 deletions
--- a/BuildLinux.sh
+++ b/BuildLinux.sh
@@ -1,11 +1,8 @@
 #!/bin/bash
-set -e # exit on first error

-export ROOT=`pwd`
-export NCORES=`nproc --all`
-export CMAKE_BUILD_PARALLEL_LEVEL=${NCORES}
-FOUND_GTK2=$(dpkg -l libgtk* | grep gtk2)
-FOUND_GTK3=$(dpkg -l libgtk* | grep gtk-3)
+export ROOT=$(dirname $(readlink -f ${0}))
+
+set -e # exit on first error

 function check_available_memory_and_disk() {
    FREE_MEM_GB=$(free -g -t | grep 'Mem' | rev | cut -d" " -f1 | rev)
@@ -27,243 +24,176 @@ function check_available_memory_and_disk() {
    fi
 }

+function usage() {
+    echo "Usage: ./BuildLinux.sh [-1][-b][-c][-d][-i][-r][-s][-u]"
+    echo "   -1: limit builds to 1 core (where possible)"
+    echo "   -f: disable safe parallel number limit(By default, the maximum number of parallels is set to free memory/2.5)"
+    echo "   -b: build in debug mode"
+    echo "   -c: force a clean build"
+    echo "   -d: build deps (optional)"
+    echo "   -h: this help output"
+    echo "   -i: Generate appimage (optional)"
+    echo "   -r: skip ram and disk checks (low ram compiling)"
+    echo "   -s: build qidi-studio (optional)"
+    echo "   -u: update and build dependencies (optional and need sudo)"
+    echo "For a first use, you want to 'sudo ./BuildLinux.sh -u'"
+    echo "   and then './BuildLinux.sh -dsi'"
+}
+
 unset name
-while getopts ":dsiuhgbr" opt; do
+while getopts ":1fbcdghirsu" opt; do
  case ${opt} in
-    u )
-        UPDATE_LIB="1"
+    1 )
+        export CMAKE_BUILD_PARALLEL_LEVEL=1
        ;;
-    i )
-        BUILD_IMAGE="1"
-        ;;
-    d )
-        BUILD_DEPS="1"
-        ;;
-    s )
-        BUILD_QIDI_STUDIO="1"
+    f )
+        DISABLE_PARALLEL_LIMIT=1
        ;;
    b )
        BUILD_DEBUG="1"
        ;;
-    g )
-        FOUND_GTK3=""
+    c )
+        CLEAN_BUILD=1
+        ;;
+    d )
+        BUILD_DEPS="1"
+        ;;
+    h ) usage
+        exit 0
+        ;;
+    i )
+        BUILD_IMAGE="1"
        ;;
    r )
-	SKIP_RAM_CHECK="1"
+	    SKIP_RAM_CHECK="1"
 	;;
-    h ) echo "Usage: ./BuildLinux.sh [-i][-u][-d][-s][-b][-g]"
-        echo "   -i: Generate appimage (optional)"
-        echo "   -g: force gtk2 build"
-        echo "   -b: build in debug mode"
-        echo "   -d: build deps (optional)"
-        echo "   -s: build qidi-studio (optional)"
-        echo "   -u: only update clock & dependency packets (optional and need sudo)"
-	echo "   -r: skip free ram check (low ram compiling)"
-        echo "For a first use, you want to 'sudo ./BuildLinux.sh -u'"
-        echo "   and then './BuildLinux.sh -dsi'"
-        exit 0
+    s )
+        BUILD_QIDI_STUDIO="1"
+        ;;
+    u )
+        UPDATE_LIB="1"
        ;;
  esac
 done

-if [ $OPTIND -eq 1 ]
+if [ ${OPTIND} -eq 1 ]
 then
-    echo "Usage: ./BuildLinux.sh [-i][-u][-d][-s][-b][-g]"
-    echo "   -i: Generate appimage (optional)"
-    echo "   -g: force gtk2 build"
-    echo "   -b: build in debug mode"
-    echo "   -d: build deps (optional)"
-    echo "   -s: build qidi-studio (optional)"
-    echo "   -u: only update clock & dependency packets (optional and need sudo)"
-    echo "   -r: skip free ram check (low ram compiling)"
-    echo "For a first use, you want to 'sudo ./BuildLinux.sh -u'"
-    echo "   and then './BuildLinux.sh -dsi'"
+    usage
    exit 0
 fi

-# mkdir build
-if [ ! -d "build" ]
+DISTRIBUTION=$(awk -F= '/^ID=/ {print $2}' /etc/os-release)
+VERSION=$(awk -F= '/^VERSION_ID=/ {print $2}' /etc/os-release)
+# treat ubuntu as debian
+if [ "${DISTRIBUTION}" == "ubuntu" ]
 then
-    mkdir build
+    DISTRIBUTION="debian"
 fi
-
-#FIXME: require root for -u option
-if [[ -n "$UPDATE_LIB" ]]
+if [ ! -f ./linux.d/${DISTRIBUTION} ]
 then
-    echo -n -e "Updating linux ...\n"
-    # hwclock -s # DeftDawg: Why does SuperSlicer want to do this?
-    apt update
-    if [[ -z "$FOUND_GTK3" ]]
-    then
-        echo -e "\nInstalling: libgtk2.0-dev libglew-dev libudev-dev libdbus-1-dev cmake git\n"
-        apt install -y libgtk2.0-dev libglew-dev libudev-dev libdbus-1-dev cmake git
-    else
-        echo -e "\nFind libgtk-3, installing: libgtk-3-dev libglew-dev libudev-dev libdbus-1-dev cmake git\n"
-        apt install -y libgtk-3-dev libglew-dev libudev-dev libdbus-1-dev cmake git
-    fi
-    # for ubuntu 22.04:
-    ubu_version="$(cat /etc/issue)" 
-    if [[ $ubu_version == "Ubuntu 22.04"* ]]
-    then
-        apt install -y curl libssl-dev libcurl4-openssl-dev m4
-    elif [[ $ubu_version == "Ubuntu 24.04"* ]]
-    then
-        NEW_SOURCE="deb http://gb.archive.ubuntu.com/ubuntu jammy main"
-        if grep -qF -- "$NEW_SOURCE" /etc/apt/sources.list; then
-            echo "source exist: $NEW_SOURCE"
-        else
-            echo "$NEW_SOURCE" | sudo tee -a /etc/apt/sources.list > /dev/null
-        fi
-        apt update
-    fi
-    if [[ -n "$BUILD_DEBUG" ]]
-    then
-        echo -e "\nInstalling: libssl-dev libcurl4-openssl-dev\n"
-        apt install -y libssl-dev libcurl4-openssl-dev
-    fi
-
-    # Addtional Dev packages for QIDI Studio
-    export REQUIRED_DEV_PACKAGES="libgstreamerd-3-dev libsecret-1-dev libwebkit2gtk-4.0-dev libosmesa6-dev libssl-dev libcurl4-openssl-dev eglexternalplatform-dev libudev-dev libdbus-1-dev extra-cmake-modules"
-    # libwebkit2gtk-4.1-dev ??
-    export DEV_PACKAGES_COUNT=$(echo ${REQUIRED_DEV_PACKAGES} | wc -w)
-    if [ $(dpkg --get-selections | grep -E "$(echo ${REQUIRED_DEV_PACKAGES} | tr ' ' '|')" | wc -l) -lt ${DEV_PACKAGES_COUNT} ]; then
-        sudo apt install -y ${REQUIRED_DEV_PACKAGES} git cmake wget file
-    fi
-    echo -e "done\n"
-    exit 0
+    echo "Your distribution does not appear to be currently supported by these build scripts"
+    exit 1
 fi
+source ./linux.d/${DISTRIBUTION}

-FOUND_GTK2_DEV=$(dpkg -l libgtk* | grep gtk2.0-dev || echo '')
-FOUND_GTK3_DEV=$(dpkg -l libgtk* | grep gtk-3-dev || echo '')
-echo "FOUND_GTK2=$FOUND_GTK2)"
-if [[ -z "$FOUND_GTK2_DEV" ]]
-then
-if [[ -z "$FOUND_GTK3_DEV" ]]
+echo "FOUND_GTK3=${FOUND_GTK3}"
+if [[ -z "${FOUND_GTK3_DEV}" ]]
 then
    echo "Error, you must install the dependencies before."
    echo "Use option -u with sudo"
-    exit 0
-fi
+    exit 1
 fi

-echo "[1/9] Updating submodules..."
-{
-    # update submodule profiles
-    pushd resources/profiles
-    git submodule update --init
-    popd
-}
-
-echo "[2/9] Changing date in version..."
+echo "Changing date in version..."
 {
    # change date in version
    sed -i "s/+UNKNOWN/_$(date '+%F')/" version.inc
 }
 echo "done"

-# mkdir in deps
-if [ ! -d "deps/build" ]
+if ! [[ -n "${SKIP_RAM_CHECK}" ]]
 then
-    mkdir deps/build
+    check_available_memory_and_disk
 fi

-if ! [[ -n "$SKIP_RAM_CHECK" ]]
+if ! [[ -n "${DISABLE_PARALLEL_LIMIT}" ]]
 then
-check_available_memory_and_disk
-fi
-
-if [[ -n "$BUILD_DEPS" ]]
-then
-    echo "[3/9] Configuring dependencies..."
-    BUILD_ARGS=""
-    if [[ -n "$FOUND_GTK3_DEV" ]]
-    then
-        BUILD_ARGS="-DDEP_WX_GTK3=ON"
+    FREE_MEM_GB=$(free -g -t | grep 'Mem' | rev | cut -d" " -f1 | rev)
+    MAX_THREADS=$((FREE_MEM_GB * 10 / 25))
+    if [ "$MAX_THREADS" -lt 1 ]; then
+        export CMAKE_BUILD_PARALLEL_LEVEL=1
+    else
+        export CMAKE_BUILD_PARALLEL_LEVEL=${MAX_THREADS}
    fi
-    if [[ -n "$BUILD_DEBUG" ]]
+    echo "System free memory: ${FREE_MEM_GB} GB"
+    echo "Setting CMAKE_BUILD_PARALLEL_LEVEL: ${CMAKE_BUILD_PARALLEL_LEVEL}"
+fi
+
+if [[ -n "${BUILD_DEPS}" ]]
+then
+    echo "Configuring dependencies..."
+    BUILD_ARGS="-DDEP_WX_GTK3=ON"
+    if [[ -n "${CLEAN_BUILD}" ]]
    then
-        # have to build deps with debug & release or the cmake won't find evrything it needs
+        rm -fr deps/build
+    fi
+    if [ ! -d "deps/build" ]
+    then
+        mkdir deps/build
+    fi
+    if [[ -n "${BUILD_DEBUG}" ]]
+    then
+        # have to build deps with debug & release or the cmake won't find everything it needs
        mkdir deps/build/release
-        pushd deps/build/release
-            cmake ../.. -DDESTDIR="../destdir" $BUILD_ARGS
-            make -j$NCORES
-        popd
+        cmake -S deps -B deps/build/release -G Ninja -DDESTDIR="../destdir" ${BUILD_ARGS}
+        cmake --build deps/build/release
        BUILD_ARGS="${BUILD_ARGS} -DCMAKE_BUILD_TYPE=Debug"
    fi
-    
-    # cmake deps
-    pushd deps/build
-        cmake .. $BUILD_ARGS
-        echo "done"
-        
-        # make deps
-        echo "[4/9] Building dependencies..."
-        make -j$NCORES
-        echo "done"

-        # rename wxscintilla # TODO: DeftDawg: Does QIDIStudio need this?
-        # echo "[5/9] Renaming wxscintilla library..."
-        # pushd destdir/usr/local/lib
-        #     if [[ -z "$FOUND_GTK3_DEV" ]]
-        #     then
-        #         cp libwxscintilla-3.1.a libwx_gtk2u_scintilla-3.1.a
-        #     else
-        #         cp libwxscintilla-3.1.a libwx_gtk3u_scintilla-3.1.a
-        #     fi
-        # popd
-        # echo "done"
-
-        # FIXME: only clean deps if compiling succeeds; otherwise reruns waste tonnes of time!
-        # clean deps
-        # echo "[6/9] Cleaning dependencies..."
-        # rm -rf dep_*
-    popd
-    echo "done"
+    echo "cmake -S deps -B deps/build -G Ninja ${BUILD_ARGS}"
+    cmake -S deps -B deps/build -G Ninja ${BUILD_ARGS}
+    cmake --build deps/build
 fi

-if [[ -n "$BUILD_QIDI_STUDIO" ]]
+if [[ -n "${BUILD_QIDI_STUDIO}" ]]
 then
-    echo "[7/9] Configuring Slic3r..."
+    echo "Configuring QIDIStudio..."
+    if [[ -n "${CLEAN_BUILD}" ]]
+    then
+        rm -fr build
+    fi
    BUILD_ARGS=""
-    if [[ -n "$FOUND_GTK3_DEV" ]]
+    if [[ -n "${FOUND_GTK3_DEV}" ]]
    then
        BUILD_ARGS="-DSLIC3R_GTK=3"
    fi
-    if [[ -n "$BUILD_DEBUG" ]]
+    if [[ -n "${BUILD_DEBUG}" ]]
    then
        BUILD_ARGS="${BUILD_ARGS} -DCMAKE_BUILD_TYPE=Debug -DQDT_INTERNAL_TESTING=1"
    else
        BUILD_ARGS="${BUILD_ARGS} -DQDT_RELEASE_TO_PUBLIC=1 -DQDT_INTERNAL_TESTING=0"
    fi
-    
-    # cmake
-    pushd build
-        cmake .. -DCMAKE_PREFIX_PATH="$PWD/../deps/build/destdir/usr/local" -DSLIC3R_STATIC=1 ${BUILD_ARGS}
-        echo "done"
-        
-        # make Slic3r
-        echo "[8/9] Building Slic3r..."
-        make -j$NCORES QIDIStudio # Slic3r
-
-        # make .mo
-        # make gettext_po_to_mo # FIXME: DeftDawg: complains about msgfmt not existing even in SuperSlicer, did this ever work?
-    
-    popd
+    echo -e "cmake -S . -B build -G Ninja -DCMAKE_PREFIX_PATH="${PWD}/deps/build/destdir/usr/local" -DSLIC3R_STATIC=1 ${BUILD_ARGS}"
+    cmake -S . -B build -G Ninja \
+        -DCMAKE_PREFIX_PATH="${PWD}/deps/build/destdir/usr/local" \
+        -DSLIC3R_STATIC=1 \
+        ${BUILD_ARGS}
+    echo "done"
+    echo "Building QIDIStudio ..."
+    cmake --build build --target QIDIStudio
    echo "done"
 fi

-if [[ -e $ROOT/build/src/BuildLinuxImage.sh ]]; then
+if [[ -e ${ROOT}/build/src/BuildLinuxImage.sh ]]; then
 # Give proper permissions to script
-chmod 755 $ROOT/build/src/BuildLinuxImage.sh
+chmod 755 ${ROOT}/build/src/BuildLinuxImage.sh

 echo "[9/9] Generating Linux app..."
    pushd build
-        if [[ -n "$BUILD_IMAGE" ]]
+        if [[ -n "${BUILD_IMAGE}" ]]
        then
-            $ROOT/build/src/BuildLinuxImage.sh -i
-        else
-            $ROOT/build/src/BuildLinuxImage.sh
+            ${ROOT}/build/src/BuildLinuxImage.sh -i
        fi
    popd
 echo "done"
-fi
+fi
--- a/CMakeLists.txt
+++ b/CMakeLists.txt
@@ -42,6 +42,7 @@ set(SLIC3R_GTK "2" CACHE STRING "GTK version to use with wxWidgets on Linux")

 set(IS_CROSS_COMPILE FALSE)

+set(FLATPAK FALSE CACHE BOOL "Not copy FFMPEG file")

 if (APPLE)
    set(CMAKE_FIND_FRAMEWORK LAST)
@@ -54,6 +55,8 @@ if (APPLE)
        set(CMAKE_INSTALL_RPATH @executable_path/../Frameworks)
    endif()
    set(CMAKE_OSX_DEPLOYMENT_TARGET "10.15" CACHE STRING "Minimum OS X deployment version" FORCE)
+elseif (CMAKE_SYSTEM_NAME STREQUAL "Linux")
+    set(CMAKE_INSTALL_RPATH "$ORIGIN")
 endif ()

 # Proposal for C++ unit tests and sandboxes
@@ -167,6 +170,7 @@ set(CMAKE_POSITION_INDEPENDENT_CODE ON)
 # WIN10SDK_PATH is used to point CMake to the WIN10 SDK installation directory.
 # We pick it from environment if it is not defined in another way
 if(WIN32)
+    find_package(PkgConfig REQUIRED)
    if(NOT DEFINED WIN10SDK_PATH)
        if(DEFINED ENV{WIN10SDK_PATH})
                set(WIN10SDK_PATH "$ENV{WIN10SDK_PATH}")
@@ -619,6 +623,10 @@ function(qidistudio_copy_dlls target config postfix output_dlls)
            ${CMAKE_PREFIX_PATH}/bin/occt/TKXDESTEP.dll
            ${CMAKE_PREFIX_PATH}/bin/occt/TKXSBase.dll
            ${CMAKE_PREFIX_PATH}/bin/freetype.dll
+            ${CMAKE_PREFIX_PATH}/bin/avcodec-61.dll
+            ${CMAKE_PREFIX_PATH}/bin/swresample-5.dll
+            ${CMAKE_PREFIX_PATH}/bin/swscale-8.dll
+            ${CMAKE_PREFIX_PATH}/bin/avutil-59.dll
         DESTINATION ${_out_dir})

    set(${output_dlls}
@@ -654,11 +662,50 @@ function(qidistudio_copy_dlls target config postfix output_dlls)
        ${_out_dir}/TKXSBase.dll

        ${_out_dir}/freetype.dll
+        ${_out_dir}/avcodec-61.dll
+        ${_out_dir}/swresample-5.dll
+        ${_out_dir}/swscale-8.dll
+        ${_out_dir}/avutil-59.dll
        PARENT_SCOPE
    )
    
 endfunction()

+function(qidistudio_copy_sos target config postfix output_sos)
+
+    set(_out_dir "${CMAKE_CURRENT_BINARY_DIR}")
+    message ("set out_dir to CMAKE_CURRENT_BINARY_DIR: ${_out_dir}")
+
+    file(COPY ${CMAKE_PREFIX_PATH}/lib/libavcodec.so
+            ${CMAKE_PREFIX_PATH}/lib/libavcodec.so.61
+            ${CMAKE_PREFIX_PATH}/lib/libavcodec.so.61.3.100
+            ${CMAKE_PREFIX_PATH}/lib/libavutil.so
+            ${CMAKE_PREFIX_PATH}/lib/libavutil.so.59
+            ${CMAKE_PREFIX_PATH}/lib/libavutil.so.59.8.100
+            ${CMAKE_PREFIX_PATH}/lib/libswscale.so
+            ${CMAKE_PREFIX_PATH}/lib/libswscale.so.8
+            ${CMAKE_PREFIX_PATH}/lib/libswscale.so.8.1.100
+            ${CMAKE_PREFIX_PATH}/lib/libswresample.so
+            ${CMAKE_PREFIX_PATH}/lib/libswresample.so.5
+            ${CMAKE_PREFIX_PATH}/lib/libswresample.so.5.1.100
+         DESTINATION ${_out_dir})
+
+    set(${output_dlls}
+        ${_out_dir}/libavcodec.so
+        ${_out_dir}/libavcodec.so.61
+        ${_out_dir}/libavcodec.so.61.3.100
+        ${_out_dir}/libavutil.so
+        ${_out_dir}/libavutil.so.59
+        ${_out_dir}/libavutil.so.59.8.100
+        ${_out_dir}/libswscale.so
+        ${_out_dir}/libswscale.so.8
+        ${_out_dir}/libswscale.so.8.1.100
+        ${_out_dir}/libswresample.so
+        ${_out_dir}/libswresample.so.5
+        ${_out_dir}/libswresample.so.5.1.100
+        PARENT_SCOPE
+    )
+endfunction()

 # libslic3r, QIDIStudio GUI and the QIDIStudio executable.
 add_subdirectory(src)
@@ -714,4 +761,18 @@ else ()
    install(DIRECTORY "${SLIC3R_RESOURCES_DIR}/" DESTINATION "${CMAKE_INSTALL_PREFIX}/resources")
 endif ()

+if (CMAKE_SYSTEM_NAME STREQUAL "Linux" AND NOT FLATPAK)
+    set(LIBRARY_FILES
+    ${LIBDIR_BIN}/libavcodec.so.61
+    ${LIBDIR_BIN}/libavcodec.so.61.3.100
+    ${LIBDIR_BIN}/libavutil.so.59
+    ${LIBDIR_BIN}/libavutil.so.59.8.100
+    ${LIBDIR_BIN}/libswresample.so.5
+    ${LIBDIR_BIN}/libswresample.so.5.1.100
+    ${LIBDIR_BIN}/libswscale.so.8
+    ${LIBDIR_BIN}/libswscale.so.8.1.100
+    )
+    install(FILES ${LIBRARY_FILES} DESTINATION "${CMAKE_INSTALL_PREFIX}/bin")
+endif ()
+
 configure_file(${LIBDIR}/platform/unix/fhs.hpp.in ${LIBDIR_BIN}/platform/unix/fhs.hpp)
--- a/DockerRun.sh
+++ b/DockerRun.sh
@@ -20,6 +20,8 @@ docker run \
  --privileged=true \
  `# Attach tty for running qidi with command line things` \
  -ti \
+  `# Remove container when it is finished` \
+  --rm \
  `# Pass all parameters from this script to the qidi ENTRYPOINT binary` \
  qidistudio $* 
  
--- a/README.md
+++ b/README.md
@@ -4,20 +4,116 @@
 # QIDIStudio
 QIDIStudio is a professional 3D printer slicing software，which is perfectly compatible with all printers and 3D printing filaments of QIDI Technology. Multi-platform support, simple inerface, easy to use, complate functions, easy to learn 3D printing.

-**Notice:QIDIStudio as a new software dedicated to QIDI's new high speed printers.**
-
 QIDIStudio is based on [BambuStudio](https://github.com/bambulab/BambuStudio) by Bambu Lab, Bambu Studio is based on [PrusaSlicer](https://github.com/prusa3d/PrusaSlicer) by Prusa Research, which is from [Slic3r](https://github.com/Slic3r/Slic3r) by Alessandro Ranellucci and the RepRap community.
 Thanks to Bambulab, PrusaSlicer and OrcaSlicer for their contributions to the 3D printing community.

 See the [QIDI's homepage](https://qidi3d.com) for more information.

-### Report Issues and Make Suggestions
+<details open>
+  <summary>Content Navigation</summary>
+  <ol>
+    <li>
+      <a href="#function-introduction">Function Introduction</a>
+    </li>
+    <li>
+      <a href="#wiki">Wiki</a>
+    </li>
+    <li>
+      <a href="#Supporting-QIDI-Link-App">Supporting QIDI Link App</a>
+    </li>
+    <li>
+      <a href="#report-issues-and-make-suggestions">Report Issues and Make Suggestions</a>
+      <ul>
+        <li><a href="#some-formatting-requirements">Some Formatting Requirements</a></li>
+      </ul>
+    </li>
+    <li>
+      <a href="#license">License</a>
+    </li>
+  </ol>
+</details>
+
+----
+## Function Introduction
+
+<p align="center">
+  <img src="/readmeRes/UI.png" alt="UI">
+</p>
+
+### Key features are:
+
+* **Slicer:** Fast and stable 3D model slicer
+* **Printer:** Perfect compatibility with all high-speed 3D printers of QIDI TECH
+* **Filament:** Perfect compatibility with all filaments of QIDI TECH and some general filaments
+* **LAN:** The printer can be directly connected through IP, convenient, safe and stable
+* **Internet:** Remote connection, start printing anytime, anywhere
+
+### Other major features are:
+
+* **Model:** A variety of model operations, move, scale, rotate, crop, color, repair, combine, split, and more
+* **Parameter:** Rich parameter Settings, fine adjustment for a variety of complex models and application scenarios
+* **Calibration:** Multiple calibration functions to adjust the best parameters according to the actual situation
+
+----
+
+## wiki
+The wiki below aims to provide a detailed explanation of the QIDIStudio settings, how to get the most out of them as well as how to calibrate and setup your printer.
+
+The wiki is work in progress so bear with us while we get it up and running!
+
+**[Access the wiki here](https://wiki.qidi3d.com/en/software/qidi-studio)**
+
+----
+
+## Supporting QIDI Link App
+
+**[Access QIDI Link App Guide Here](https://wiki.qidi3d.com/en/app)**
+
+The supporting QIDI Link App supports IOS and Android platforms. In the app, you can scan the code to connect to the printer, remotely monitor the printer's printing progress, control the printer's printing parameters, and perform operations such as feeding and returning materials.
+<p align="center">
+  <img  src="/readmeRes/qidilink.png" alt="Add filament option ——Seal">
+</p>
+
+----
+
+## Report Issues and Make Suggestions

 Please send your question in the form of video or pictures to us through the [After-Sales Service](https://qidi3d.com/pages/warranty-policy-after-sales-support), we will reply to your information within 12 hours.

 Please try to contact us through [After-Sales Service](https://qidi3d.com/pages/warranty-policy-after-sales-support) and report problems or suggestions. On github, we cannot obtain your order information, operation records and other private intelligence, nor can we generate after-sales orders, send repair files, etc. Thank you for your understanding and cooperation.

-### License
+### Some formatting requirements
+
+#### Issue Title:
+
+Briefly describe the issue (e.g., `could not open file`)
+
+#### Description:
+
+Provide a detailed description of the issue.This will help our engineers quickly locate the problem and assist you in
+resolving it
+
+- **Issue Description**:
+  - A clear explanation of the problem.
+  - Compare the expected behavior with the actual behavior.
+
+- **Steps to Reproduce**:
+  1. Step one
+  2. Step two
+  3. Step three
+
+  - Specific steps to reproduce the issue. Include a precise sequence of actions if possible.
+
+- **Additional Information**:
+  - **Screenshots/Images**: Attach relevant screenshots or images that help in understanding the issue. Please add or
+    link to images here.
+  - **Environment Information**:
+    - Operating System Version
+    - Browser/Application Version
+    - Other relevant environment details
+
+----
+## License

 QIDIStudio is licensed under the _GNU Affero General Public License, version 3_. QIDIStudio is based on BambuStudio by Bambu Lab.

--- a/cmake/modules/MacOSXBundleInfo.plist.in
+++ b/cmake/modules/MacOSXBundleInfo.plist.in
@@ -11,7 +11,7 @@
 	<key>CFBundleIconFile</key>
 	<string>${MACOSX_BUNDLE_ICON_FILE}</string>
 	<key>CFBundleIdentifier</key>
-	<string>com.qidilab.qidi-studio</string>
+	<string>com.qiditech.qidi-studio</string>
 	<key>CFBundleInfoDictionaryVersion</key>
 	<string>6.0</string>
 	<key>CFBundleLongVersionString</key>
@@ -129,5 +129,10 @@
 	<true/>
 	<key>NSHumanReadableCopyright</key>
 	<string>${MACOSX_BUNDLE_COPYRIGHT}</string>
+	<key>NSAppTransportSecurity</key>
+	<dict>
+		<key>NSAllowsArbitraryLoads</key>
+		<true/>
+	</dict>
 </dict>
 </plist>
--- a/deps/Boost/0001-Boost-fix.patch
+++ b/deps/Boost/0001-Boost-fix.patch
@@ -1,5 +1,5 @@
 From 1d6cd7c2f8640db3cda194c1b9b82f1e4b321395 Mon Sep 17 00:00:00 2001
-From: "chunmao.guo" <chunmao.guo@qidilab.com>
+From: "chunmao.guo" <chunmao.guo@qiditech.com>
 Date: Thu, 5 Jan 2023 15:55:57 +0800
 Subject: [PATCH] FIX: limit_handles

--- a/deps/Boost/Boost.cmake
+++ b/deps/Boost/Boost.cmake
@@ -129,7 +129,7 @@ list(APPEND _patch_command COMMAND git init && ${PATCH_CMD} ${CMAKE_CURRENT_LIST
 ExternalProject_Add(
    dep_Boost
    #URL "https://boostorg.jfrog.io/artifactory/main/release/1.78.0/source/boost_1_78_0.zip"
-    URL "https://github.com/qidilab/boost/releases/download/1.78.0/boost_1_78_0.zip"
+    URL "https://github.com/qiditech/boost/releases/download/1.78.0/boost_1_78_0.zip"
    URL_HASH SHA256=f22143b5528e081123c3c5ed437e92f648fe69748e95fa6e2bd41484e2986cc3
    DOWNLOAD_DIR ${DEP_DOWNLOAD_DIR}/Boost
    CONFIGURE_COMMAND "${_bootstrap_cmd}"
--- a/deps/CMakeLists.txt
+++ b/deps/CMakeLists.txt
@@ -39,6 +39,7 @@ option(DEP_BUILD_OPENSSL "Compile openssl" ON)
 option(DEP_BUILD_GLFW "Compile GLFW" ON)
 option(DEP_BUILD_FREETYPE "Compile freetype" ON)
 option(DEP_BUILD_WXWIDGETS "Compile wxWidgets" ON)
+option(DEP_BUILD_FFMPEG "Compile ffmpeg" ON)

 set(DESTDIR "${CMAKE_CURRENT_BINARY_DIR}/destdir" CACHE PATH "Destination directory")
 set(DEP_DOWNLOAD_DIR ${CMAKE_CURRENT_BINARY_DIR} CACHE PATH "Path for downloaded source packages.")
@@ -229,6 +230,11 @@ if (DEP_BUILD_FREETYPE)
 endif ()
 include(OCCT/OCCT.cmake)
 include(OpenCV/OpenCV.cmake)
+set(FFMPEG_PKG "")
+if (DEP_BUILD_FFMPEG)
+    include(FFMPEG/FFMPEG.cmake)
+    set(FFMPEG_PKG dep_FFMPEG)
+endif ()

 set(_dep_list
    ${BOOST_PKG}
@@ -247,6 +253,7 @@ set(_dep_list
    ${ZLIB_PKG}
    ${EXPAT_PKG}
    ${FREETYPE_PKG}
+    ${FFMPEG_PKG}
    )

 if (MSVC)
--- a/deps/FFMPEG/FFMPEG.cmake
+++ b/deps/FFMPEG/FFMPEG.cmake
@@ -0,0 +1,60 @@
+set(_conf_cmd ./configure)
+
+if (MSVC)
+    set(_dstdir ${DESTDIR}/usr/local)
+    set(_source_dir "${CMAKE_BINARY_DIR}/dep_FFMPEG-prefix/src/dep_FFMPEG")
+    ExternalProject_Add(dep_FFMPEG
+        URL https://github.com/qiditech/ffmpeg_prebuilts/releases/download/7.0.2/7.0.2_msvc.zip
+        URL_HASH SHA256=DF44AE6B97CE84C720695AE7F151B4A9654915D1841C68F10D62A1189E0E7181
+        DOWNLOAD_DIR ${DEP_DOWNLOAD_DIR}/FFMPEG
+        CONFIGURE_COMMAND ""
+        BUILD_COMMAND ""
+        INSTALL_COMMAND
+            # COMMAND ${CMAKE_COMMAND} -E make_directory "${_dstdir}/bin"
+            # COMMAND ${CMAKE_COMMAND} -E make_directory "${_dstdir}/lib"
+            # COMMAND ${CMAKE_COMMAND} -E make_directory "${_dstdir}/include"
+            COMMAND ${CMAKE_COMMAND} -E copy_directory  "${_source_dir}/bin" "${_dstdir}/bin"
+            COMMAND ${CMAKE_COMMAND} -E copy_directory  "${_source_dir}/lib" "${_dstdir}/lib"
+            COMMAND ${CMAKE_COMMAND} -E copy_directory  "${_source_dir}/include" "${_dstdir}/include"
+    )
+
+else ()
+    set(_extra_cmd "--pkg-config-flags=\"--static\"")
+    string(APPEND _extra_cmd "--extra-cflags=\"-I ${DESTDIR}/usr/local/include\"")
+    string(APPEND _extra_cmd "--extra-ldflags=\"-I ${DESTDIR}/usr/local/lib\"")
+    string(APPEND _extra_cmd "--extra-libs=\"-lpthread -lm\"")
+    string(APPEND _extra_cmd "--ld=\"g++\"")
+    string(APPEND _extra_cmd "--bindir=\"${DESTDIR}/usr/local/bin\"")
+    string(APPEND _extra_cmd "--enable-gpl")
+    string(APPEND _extra_cmd "--enable-nonfree")
+
+
+    ExternalProject_Add(dep_FFMPEG
+        URL https://github.com/FFmpeg/FFmpeg/archive/refs/tags/n7.0.2.tar.gz
+        URL_HASH SHA256=5EB46D18D664A0CCADF7B0ADEE03BD3B7FA72893D667F36C69E202A807E6D533
+        DOWNLOAD_DIR ${DEP_DOWNLOAD_DIR}/FFMPEG
+        CONFIGURE_COMMAND ${_conf_cmd}
+            "--prefix=${DESTDIR}/usr/local"
+            "--enable-shared"
+            "--disable-doc"
+            "--enable-small"
+            "--disable-outdevs"
+            "--disable-filters"
+            "--enable-filter=*null*,afade,*fifo,*format,*resample,aeval,allrgb,allyuv,atempo,pan,*bars,color,*key,crop,draw*,eq*,framerate,*_qsv,*_vaapi,*v4l2*,hw*,scale,volume,test*"
+            "--disable-protocols"
+            "--enable-protocol=file,fd,pipe,rtp,udp"
+            "--disable-muxers"
+            "--enable-muxer=rtp"
+            "--disable-encoders"
+            "--disable-decoders"
+            "--enable-decoder=*aac*,h264*,mp3*,mjpeg,rv*"
+            "--disable-demuxers"
+            "--enable-demuxer=h264,mp3,mov"
+            "--disable-zlib"
+            "--disable-avdevice"
+        BUILD_IN_SOURCE ON
+        BUILD_COMMAND make -j
+        INSTALL_COMMAND make install
+    )
+
+endif()
--- a/deps/GMP/GMP.cmake
+++ b/deps/GMP/GMP.cmake
@@ -43,7 +43,7 @@ else ()
    endif ()

    ExternalProject_Add(dep_GMP
-        URL https://github.com/qidilab/gmp/archive/refs/tags/6.2.1.tar.gz
+        URL https://github.com/qiditech/gmp/archive/refs/tags/6.2.1.tar.gz
        URL_HASH SHA256=705ae57ee2014b2c6fc0f572c85ee43276b99b6b256ee16c1a9d3a8c4e3609d5
        DOWNLOAD_DIR ${DEP_DOWNLOAD_DIR}/GMP
        BUILD_IN_SOURCE ON 
--- a/deps/OCCT/OCCT.cmake
+++ b/deps/OCCT/OCCT.cmake
@@ -8,7 +8,7 @@ qidistudio_add_cmake_project(OCCT
    URL https://github.com/Open-Cascade-SAS/OCCT/archive/refs/tags/V7_6_0.zip
    URL_HASH SHA256=28334f0e98f1b1629799783e9b4d21e05349d89e695809d7e6dfa45ea43e1dbc
    #PATCH_COMMAND ${PATCH_CMD} ${CMAKE_CURRENT_LIST_DIR}/0001-OCCT-fix.patch
-    PATCH_COMMAND git apply --directory deps/build/dep_OCCT-prefix/src/dep_OCCT --verbose --ignore-space-change --whitespace=fix ${CMAKE_CURRENT_LIST_DIR}/0001-OCCT-fix.patch
+    PATCH_COMMAND ${GIT_EXECUTABLE} apply --directory deps/build/dep_OCCT-prefix/src/dep_OCCT --verbose --ignore-space-change --whitespace=fix ${CMAKE_CURRENT_LIST_DIR}/0001-OCCT-fix.patch
    #DEPENDS dep_Boost
    #DEPENDS dep_FREETYPE
    CMAKE_ARGS
--- a/deps/OpenCV/OpenCV.cmake
+++ b/deps/OpenCV/OpenCV.cmake
@@ -7,7 +7,7 @@ endif ()
 qidistudio_add_cmake_project(OpenCV
    URL https://github.com/opencv/opencv/archive/refs/tags/4.6.0.tar.gz
    URL_HASH SHA256=1ec1cba65f9f20fe5a41fda1586e01c70ea0c9a6d7b67c9e13edf0cfe2239277
-    PATCH_COMMAND git apply --directory deps/build/dep_OpenCV-prefix/src/dep_OpenCV --verbose --ignore-space-change --whitespace=fix ${CMAKE_CURRENT_LIST_DIR}/0001-OpenCV-fix.patch
+    PATCH_COMMAND ${GIT_EXECUTABLE} apply --directory deps/build/dep_OpenCV-prefix/src/dep_OpenCV --verbose --ignore-space-change --whitespace=fix ${CMAKE_CURRENT_LIST_DIR}/0001-OpenCV-fix.patch
    CMAKE_ARGS
    -DBUILD_SHARED_LIBS=0
       -DBUILD_PERE_TESTS=OFF
--- a/deps/wxWidgets/wxWidgets.cmake
+++ b/deps/wxWidgets/wxWidgets.cmake
@@ -23,7 +23,7 @@ endif ()
 # endif ()

 qidistudio_add_cmake_project(wxWidgets
-    GIT_REPOSITORY "https://github.com/bambulab/wxWidgets"
+    GIT_REPOSITORY "https://github.com/qiditech/wxWidgets"
    GIT_TAG master
    DEPENDS ${PNG_PKG} ${ZLIB_PKG} ${EXPAT_PKG} ${TIFF_PKG} ${JPEG_PKG}
    CMAKE_ARGS
--- a/doc/Localization_guide.md
+++ b/doc/Localization_guide.md
@@ -13,7 +13,7 @@ Full manual for GNUgettext can be seen here: http://www.gnu.org/software/gettext

 ### Scenario 1. How do I add a translation or fix an existing translation
 1. Get PO-file 'QIDIStudio_xx.pot' from corresponding sub-folder here:
-https://github.com/qidilab/QIDIStudio/tree/master/qdt/i18n
+https://github.com/qiditech/QIDIStudio/tree/master/qdt/i18n
 2. Open this file in PoEdit as "Edit a translation"
 3. Apply your corrections to the translation
 4. Push changed QIDIStudio_xx.po into the original folder
@@ -21,14 +21,14 @@ https://github.com/qidilab/QIDIStudio/tree/master/qdt/i18n

 ### Scenario 2. How do I add a new language support
 1. Get file QIDIStudio.pot here :
-https://github.com/qidilab/QIDIStudio/tree/master/qdt/i18n
+https://github.com/qiditech/QIDIStudio/tree/master/qdt/i18n
 2. Open it in PoEdit for "Create new translation"
 3. Select Translation Language (for example French).
 4. As a result you will have fr.po - the file containing translation to French.
 Notice. When the translation is complete you need to:
    - Rename the file to QIDIStudio_fr.po
    - Click "Save file" button. QIDIStudio_fr.mo will be created immediately
-    - QIDI_Studio_fr.po needs to be copied into the sub-folder fr of https://github.com/qidilab/QIDIStudio/tree/master/qdt/i18n, and be pushed
+    - QIDI_Studio_fr.po needs to be copied into the sub-folder fr of https://github.com/qiditech/QIDIStudio/tree/master/qdt/i18n, and be pushed
 	- copy QIDIStudio_xx.mo into resources/i18n/xx and rename it to QIDIStudio.mo, then push the changed file.
 ( name of folder "fr" means "French" - the translation language). 

@@ -43,7 +43,7 @@ If you add new file resource, add it to the list of files containing macro `L()`
 ### Scenario 4. How do I use GNUgettext to localize my own application taking QIDI Studio as an example

 1.  For convenience create a list of files with this macro `L(s)`. We have 
-https://github.com/qidilab/QIDIStudio/blob/master/qdt/i18n/list.txt.
+https://github.com/qiditech/QIDIStudio/blob/master/qdt/i18n/list.txt.

 2.  Create template file(*.POT) with GNUgettext command:
    ```
--- a/doc/release_notes_cn.md
+++ b/doc/release_notes_cn.md
@@ -15,4 +15,4 @@
 7. 支持匈牙利语
 8. 一些关键问题修复

-详细信息请查看：https://github.com/qidilab/QIDIStudio/releases
+详细信息请查看：https://github.com/qiditech/QIDIStudio/releases
--- a/doc/release_notes_en.md
+++ b/doc/release_notes_en.md
@@ -15,4 +15,4 @@
 7. Added Magyar translations
 8. Fixed some known bugs

-For details, please check https://github.com/qidilab/QIDIStudio/releases
+For details, please check https://github.com/qiditech/QIDIStudio/releases
--- a/linux.d/debian
+++ b/linux.d/debian
@@ -0,0 +1,62 @@
+FOUND_GTK3=$(dpkg -l libgtk* | grep gtk-3)
+
+REQUIRED_DEV_PACKAGES=(
+    autoconf
+    build-essential
+    ninja-build
+    cmake
+    extra-cmake-modules
+    file
+    gettext
+    git
+    wget
+    libgstreamerd-3-dev
+    libsecret-1-dev
+    libosmesa6-dev
+    libssl-dev
+    eglexternalplatform-dev
+    libcurl4-openssl-dev
+    libdbus-1-dev
+    libglew-dev
+    libudev-dev
+    libmspack-dev
+    libgl1-mesa-dev
+    libgtk-3-dev
+    libxkbcommon-dev
+    libtool
+    libunwind-dev
+    libfuse2
+    texinfo
+    nasm
+    yasm
+    libx264-dev
+)
+
+if [[ -n "$UPDATE_LIB" ]]
+then
+    # for ubuntu 22+ and 23+:
+    ubu_major_version="$(grep VERSION_ID /etc/os-release | cut -d "=" -f 2 | cut -d "." -f 1 | tr -d /\"/)"
+    if [ $ubu_major_version = "22" ] || [ $ubu_major_version = "23" ]
+    then
+        REQUIRED_DEV_PACKAGES+=(libwebkit2gtk-4.0-dev curl libfuse-dev libssl-dev libcurl4-openssl-dev m4)
+    elif [ $ubu_major_version = "24" ]
+    then
+        REQUIRED_DEV_PACKAGES+=(libwebkit2gtk-4.1-dev)
+    else
+        REQUIRED_DEV_PACKAGES+=(libwebkit2gtk-4.0-dev)
+    fi
+    if [[ -n "$BUILD_DEBUG" ]]
+    then
+        REQUIRED_DEV_PACKAGES+=(libssl-dev libcurl4-openssl-dev)
+    fi
+    # TODO: optimize this by checking which, if any, packages are already installed
+
+    # install them all at once
+    sudo apt update
+    sudo apt install -y ${REQUIRED_DEV_PACKAGES[@]}
+
+    echo -e "done\n"
+    exit 0
+fi
+
+FOUND_GTK3_DEV=$(dpkg -l libgtk* | grep gtk-3-dev || echo '')
--- a/linux.d/fedora
+++ b/linux.d/fedora
@@ -0,0 +1,66 @@
+FOUND_GTK3=$(rpm -qa | grep -P '^gtk3' || true)
+
+REQUIRED_DEV_PACKAGES=(
+    autoconf
+    automake
+    cmake
+    dbus-devel
+    eglexternalplatform-devel
+    extra-cmake-modules
+    file
+    gcc
+    gcc-c++
+    gettext
+    git
+    perl
+    gstreamer1-devel
+    gstreamer1-plugins-base-devel
+    gstreamer1-plugin-openh264
+    gstreamermm-devel
+    gtk3-devel
+    libmspack-devel
+    libsecret-devel
+    libtool
+    m4
+    mesa-libGLU-devel
+    mesa-libOSMesa-devel
+    mesa-libGL-devel
+    ninja-build
+    openssl-devel
+    perl-FindBin
+    texinfo
+    wayland-devel
+    wayland-protocols-devel
+    libxkbcommon-devel
+    wget
+    libcurl-devel
+    libquadmath-devel
+    nasm
+    yasm
+    x264-devel
+)
+
+if [[ -n "$UPDATE_LIB" ]]
+then
+    NEEDED_PKGS=""
+    fedora_version=$(awk -F= '/^VERSION_ID=/ {print $2}' /etc/os-release)
+    if [ $fedora_version == "40" ]
+    then
+        REQUIRED_DEV_PACKAGES+=(webkit2gtk4.1-devel)
+    else
+        REQUIRED_DEV_PACKAGES+=(webkit2gtk4.0-devel)
+    fi
+    for PKG in ${REQUIRED_DEV_PACKAGES[@]}; do
+        rpm -q ${PKG} > /dev/null || NEEDED_PKGS+=" ${PKG}"
+    done
+
+    if [ -n "${NEEDED_PKGS}" ]; then
+        sudo dnf install -y https://download1.rpmfusion.org/free/fedora/rpmfusion-free-release-$(rpm -E %fedora).noarch.rpm
+        sudo dnf -y update
+        sudo dnf install -y ${NEEDED_PKGS}
+    fi
+    echo -e "done\n"
+    exit 0
+fi
+
+FOUND_GTK3_DEV=$(rpm -qa | grep -P '^gtk3-devel' || true)
--- a/qds_test_tools/qds_gcode_checker/GCodeChecker.cpp
+++ b/qds_test_tools/qds_gcode_checker/GCodeChecker.cpp
@@ -17,9 +17,12 @@ const std::string Extrusion_Role_Tag = " FEATURE: ";
 const std::string Width_Tag          = " LINE_WIDTH: ";
 const std::string Wipe_Start_Tag     = " WIPE_START";
 const std::string Wipe_End_Tag       = " WIPE_END";
+const std::string Wipe_Tower_Start_Tag = " WIPE_TOWER_START";
+const std::string Wipe_Tower_End_Tag = " WIPE_TOWER_END";
 const std::string Layer_Change_Tag   = " CHANGE_LAYER";
 const std::string Height_Tag         = " LAYER_HEIGHT: ";
 const std::string filament_flow_ratio_tag = " filament_flow_ratio";
+const std::string has_scarf_joint_seam_tag = " has_scarf_joint_seam";
 const std::string nozzle_temperature_Tag   = " nozzle_temperature =";
 const std::string nozzle_temperature_initial_layer_Tag  = " nozzle_temperature_initial_layer";
 const std::string Z_HEIGHT_TAG                         = " Z_HEIGHT: ";
@@ -130,6 +133,12 @@ GCodeCheckResult GCodeChecker::parse_comment(GCodeLine& line)
        m_wiping = true;
    } else if (starts_with(comment, Wipe_End_Tag)) {
        m_wiping = false;
+    }
+    else if (starts_with(comment, Wipe_Tower_Start_Tag)) {
+        is_wipe_tower = true;
+    }
+    else if (starts_with(comment, Wipe_Tower_End_Tag)) {
+        is_wipe_tower = false;
    } else if (starts_with(comment, Height_Tag)) {
        std::string str = comment.substr(Height_Tag.size());
        if (!parse_double_from_str(str, m_height)) {
@@ -162,6 +171,11 @@ GCodeCheckResult GCodeChecker::parse_comment(GCodeLine& line)
            return GCodeCheckResult::ParseFailed;
        }
    }
+    else if (starts_with(comment, has_scarf_joint_seam_tag))
+    {
+        std::string str = comment.substr(has_scarf_joint_seam_tag.size() + 3);
+        has_scarf_joint_seam = (str == "1");
+    }
    else if (starts_with(comment, nozzle_temperature_Tag)) {
        std::string str = comment.substr(nozzle_temperature_Tag.size() + 1);
        if (!parse_double_from_str(str, nozzle_temperature)) {
@@ -232,6 +246,10 @@ GCodeCheckResult GCodeChecker::parse_command(GCodeLine& gcode_line)
                    ret = parse_M104_M109(gcode_line);
                    break;
                } // Set to nozzle temperature
+                case 1020: {
+                    ret = parse_M1020(gcode_line);
+                    break;
+                }
                default: { break; }
            }
            break;
@@ -407,20 +425,31 @@ GCodeCheckResult GCodeChecker::parse_G92(GCodeLine& gcode_line)
        return GCodeCheckResult::ParseFailed;
    }

-    if (gcode_line.has(X))
+    bool any_found = false;
+    if (gcode_line.has(X)){
        m_origin[X] = m_end_position[X] - gcode_line.get(X);
+        any_found = true;
+    }

-    if (gcode_line.has(Y))
+    if (gcode_line.has(Y)){
        m_origin[Y] = m_end_position[Y] - gcode_line.get(Y);
+        any_found = true;
+    }

-    if (gcode_line.has(Z))
+    if (gcode_line.has(Z)){
        m_origin[Z] = m_end_position[Z] - gcode_line.get(Z);
+        any_found = true;
+    }

-    if (gcode_line.has(E))
+    if (gcode_line.has(E)){
        m_end_position[E] = gcode_line.get(E);
+        any_found = true;
+    }

-    for (unsigned char a = X; a <= E; ++a) {
-        m_origin[a] = m_end_position[a];
+    if (!any_found) {
+        for (unsigned char a = X; a <= E; ++a) {
+            m_origin[a] = m_end_position[a];
+        }
    }

    return GCodeCheckResult::Success;
@@ -469,6 +498,46 @@ GCodeCheckResult GCodeChecker::parse_M104_M109(const GCodeLine &gcode_line)
    return GCodeCheckResult::Success;
 }

+GCodeCheckResult GCodeChecker::parse_M1020(const GCodeLine& gcode_line)
+{
+    const char* c = gcode_line.m_raw.c_str();
+    const char* rs = strchr(c, 'S');
+
+    if (rs != nullptr) {
+        std::string str = rs;
+        str = str.substr(1);
+        for (int i = 0; i < str.size(); i++) {
+            if (str[i] == ' ')
+                str = str.substr(0, i);
+        }
+
+        try {
+            int value = std::stoi(str);
+            if (value >= 0 && value <= filament_flow_ratio.size() - 1) {
+                filament_id = value;
+                flow_ratio = filament_flow_ratio[value];
+                return GCodeCheckResult::Success;
+            }
+            else {
+                return GCodeCheckResult::ParseFailed;
+            }
+        }
+        catch (std::invalid_argument&) {
+            std::cout << "Invalid argument: not a valid integer" << std::endl;
+            return GCodeCheckResult::ParseFailed;
+        }
+        catch (std::out_of_range&) {
+            std::cout << "Out of range: number is too large" << std::endl;
+            return GCodeCheckResult::ParseFailed;
+        }
+    }
+    else
+    {
+        std::cout << "Missing 'S' character in the G-code line!" << std::endl;
+        return GCodeCheckResult::ParseFailed;
+    }
+}
+
 double GCodeChecker::calculate_G1_width(const std::array<double, 3>& source,
                                       const std::array<double, 3>& target,
                                       double e, double height, bool is_bridge) const
@@ -593,8 +662,21 @@ GCodeCheckResult GCodeChecker::check_G0_G1_width(const GCodeLine& line)
        std::array<double, 3> target = { m_end_position[X], m_end_position[Y], m_end_position[Z] };

        bool is_bridge = m_role == erOverhangPerimeter || m_role == erBridgeInfill;
-        if (!is_bridge) {
-            double width_real = calculate_G1_width(source, target, delta_pos[E], m_height, is_bridge);
+        if (!is_bridge && !is_wipe_tower) {
+            double real_height = m_height;
+            if (line.has(Z) && has_scarf_joint_seam && line.get(Z) != 0)
+            {
+                if (line.get(Z) == z_height)
+                {
+                    return GCodeCheckResult::Success;
+                }
+                if (line.get(Z) && line.get(E))
+                {
+                    return GCodeCheckResult::Success;
+                }
+                real_height = line.get(Z) - (z_height - m_height);
+            }
+            double width_real = calculate_G1_width(source, target, delta_pos[E], real_height, is_bridge);
            if (fabs(width_real - m_width) > WIDTH_THRESHOLD) {
                std::cout << "Invalid G0_G1 because has abnormal line width." << std::endl;
                std::cout << "Width: " << m_width << " Width_real: " << width_real << std::endl;
--- a/qds_test_tools/qds_gcode_checker/GCodeChecker.h
+++ b/qds_test_tools/qds_gcode_checker/GCodeChecker.h
@@ -109,6 +109,7 @@ private:
    GCodeCheckResult parse_M82(const GCodeLine& gcode_line);
    GCodeCheckResult parse_M83(const GCodeLine& gcode_line);
    GCodeCheckResult parse_M104_M109(const GCodeLine &gcode_line);
+    GCodeCheckResult parse_M1020(const GCodeLine& gcode_line);

    GCodeCheckResult parse_comment(GCodeLine& gcode_line);

@@ -167,7 +168,7 @@ public:
        std::string cmd=input;
        size_t read = 0;

-        while (cmd.size() >= 5)
+        while (cmd.find(',') != std::string::npos)
        {
            int pt = 0;
            for (pt = 0; pt < cmd.size(); pt++) {
@@ -217,6 +218,8 @@ private:
    std::vector<double> filament_flow_ratio;
    std::vector<double> nozzle_temperature;
    std::vector<double> nozzle_temperature_initial_layer;
+    bool has_scarf_joint_seam = false;
+    bool is_wipe_tower = false;
 };

 }
--- a/qdt/i18n/QIDIStudio.pot
+++ b/qdt/i18n/QIDIStudio.pot
--- a/qdt/i18n/cs/QIDIStudio_cs.po
+++ b/qdt/i18n/cs/QIDIStudio_cs.po
--- a/qdt/i18n/de/QIDIStudio_de.po
+++ b/qdt/i18n/de/QIDIStudio_de.po
--- a/qdt/i18n/en/QIDIStudio_en.po
+++ b/qdt/i18n/en/QIDIStudio_en.po
--- a/qdt/i18n/es/QIDIStudio_es.po
+++ b/qdt/i18n/es/QIDIStudio_es.po
--- a/qdt/i18n/fr/QIDIStudio_fr.po
+++ b/qdt/i18n/fr/QIDIStudio_fr.po
--- a/qdt/i18n/hu/QIDIStudio_hu.po
+++ b/qdt/i18n/hu/QIDIStudio_hu.po
--- a/qdt/i18n/it/QIDIStudio_it.po
+++ b/qdt/i18n/it/QIDIStudio_it.po
--- a/qdt/i18n/ja/QIDIStudio_ja.po
+++ b/qdt/i18n/ja/QIDIStudio_ja.po
--- a/qdt/i18n/ko/QIDIStudio_ko.po
+++ b/qdt/i18n/ko/QIDIStudio_ko.po
--- a/qdt/i18n/nl/QIDIStudio_nl.po
+++ b/qdt/i18n/nl/QIDIStudio_nl.po
--- a/qdt/i18n/pl/QIDIStudio_pl.po
+++ b/qdt/i18n/pl/QIDIStudio_pl.po
--- a/qdt/i18n/pt-BR/QIDIStudio_pt-BR.po
+++ b/qdt/i18n/pt-BR/QIDIStudio_pt-BR.po
--- a/qdt/i18n/ru/QIDIStudio_ru.po
+++ b/qdt/i18n/ru/QIDIStudio_ru.po
--- a/qdt/i18n/sv/QIDIStudio_sv.po
+++ b/qdt/i18n/sv/QIDIStudio_sv.po
--- a/qdt/i18n/tr/QIDIStudio_tr.po
+++ b/qdt/i18n/tr/QIDIStudio_tr.po
--- a/qdt/i18n/uk/QIDIStudio_uk.po
+++ b/qdt/i18n/uk/QIDIStudio_uk.po
--- a/qdt/i18n/zh_cn/QIDIStudio_zh_CN.po
+++ b/qdt/i18n/zh_cn/QIDIStudio_zh_CN.po
--- a/readmeRes/UI.png
+++ b/readmeRes/UI.png
--- a/readmeRes/qidilink.png
+++ b/readmeRes/qidilink.png
--- a/resources/Icon.icns
+++ b/resources/Icon.icns
--- a/resources/QIDIStudio.icns
+++ b/resources/QIDIStudio.icns
--- a/resources/calib/filament_flow/flowrate-test-pass1.3mf
+++ b/resources/calib/filament_flow/flowrate-test-pass1.3mf
--- a/resources/data/hints.ini
+++ b/resources/data/hints.ini
@@ -155,7 +155,7 @@ image = images/dailytips_TypesOfSupports.png

 ; [hint:Printing Silk Filament]
 ; text = Printing Silk Filament\nDid you know that Silk filament needs special consideration to print it successfully? Higher temperature and lower speed are always recommended for the best results.
-; documentation_link= https://wiki.qidilab.com/en/x1/manual/printing-with-silk-filaments
+; documentation_link= https://wiki.qiditech.com/en/x1/manual/printing-with-silk-filaments

 [hint:Brim for better adhesion]
 text = Brim for better adhesion\nDid you know that when printing models have a small contact interface with the printing surface, it's recommended to use a brim? 
@@ -173,7 +173,7 @@ image = images/dailytips_StackObject.png

 # hint:Flush into support/objects/infill]
 # text = Flush into support/objects/infill\nDid you know that you can save the wasted filament by flushing them into support/objects/infill during filament change? 
-# documentation_link= https://wiki.qidilab.com/en/software/qidi-studio/reduce-wasting-during-filament-change
+# documentation_link= https://wiki.qiditech.com/en/software/qidi-studio/reduce-wasting-during-filament-change

 [hint:Improve strength]
 text = Improve strength\nDid you know that you can use more wall loops and higher sparse infill density to improve the strength of the model?
--- a/resources/flush/flush_data.txt
+++ b/resources/flush/flush_data.txt
@@ -0,0 +1,61 @@
+colors
+#000000 #C12E1F #00AE42 #545454 #D1D3D5 #5B6579 #F4EE2A #9D432C #5E43B7 #0A2989 #FF6A13 #8E9089
+src dst flush
+#000000 #F4EE2A 450
+#000000 #5E43B7 330
+#C12E1F #F4EE2A 420
+#C12E1F #FF6A13 210
+#00AE42 #D1D3D5 330
+#00AE42 #F4EE2A 240
+#00AE42 #FF6A13 270
+#545454 #00AE42 180
+#545454 #D1D3D5 240
+#545454 #F4EE2A 270
+#545454 #5E43B7 120
+#545454 #FF6A13 300
+#545454 #8E9089 120
+#D1D3D5 #F4EE2A 120
+#D1D3D5 #FF6A13 150
+#5B6579 #C12E1F 120
+#5B6579 #00AE42 90
+#5B6579 #D1D3D5 120
+#5B6579 #F4EE2A 180
+#5B6579 #9D432C 120
+#5B6579 #0A2989 90
+#5B6579 #FF6A13 180
+#5B6579 #8E9089 90
+#F4EE2A #000000 120
+#F4EE2A #C12E1F 90
+#F4EE2A #00AE42 150
+#F4EE2A #9D432C 150
+#F4EE2A #FF6A13 90
+#9D432C #00AE42 240
+#9D432C #D1D3D5 300
+#9D432C #F4EE2A 270
+#9D432C #FF6A13 180
+#9D432C #8E9089 210
+#5E43B7 #00AE42 180
+#5E43B7 #D1D3D5 270
+#5E43B7 #F4EE2A 270
+#5E43B7 #9D432C 150
+#5E43B7 #FF6A13 270
+#5E43B7 #8E9089 210
+#0A2989 #C12E1F 330
+#0A2989 #00AE42 210
+#0A2989 #545454 150
+#0A2989 #D1D3D5 450
+#0A2989 #5B6579 240
+#0A2989 #9D432C 270
+#0A2989 #5E43B7 180
+#0A2989 #FF6A13 390
+#0A2989 #8E9089 270
+#FF6A13 #C12E1F 90
+#FF6A13 #D1D3D5 210
+#FF6A13 #F4EE2A 210
+#FF6A13 #9D432C 120
+#FF6A13 #8E9089 180
+#8E9089 #C12E1F 150
+#8E9089 #00AE42 120
+#8E9089 #D1D3D5 150
+#8E9089 #F4EE2A 270
+#8E9089 #FF6A13 150
--- a/resources/fonts/NanumGothic-Bold.ttf
+++ b/resources/fonts/NanumGothic-Bold.ttf
--- a/resources/fonts/NanumGothic-Regular.ttf
+++ b/resources/fonts/NanumGothic-Regular.ttf
--- a/resources/fonts/NotoSansJP-Bold.ttf
+++ b/resources/fonts/NotoSansJP-Bold.ttf
--- a/resources/fonts/NotoSansJP-Regular.ttf
+++ b/resources/fonts/NotoSansJP-Regular.ttf
--- a/resources/fonts/NotoSansKR-Bold.ttf
+++ b/resources/fonts/NotoSansKR-Bold.ttf
--- a/resources/fonts/NotoSansKR-Regular.ttf
+++ b/resources/fonts/NotoSansKR-Regular.ttf
--- a/resources/fonts/SourceHanSansJP-Bold.otf
+++ b/resources/fonts/SourceHanSansJP-Bold.otf
--- a/resources/fonts/SourceHanSansJP-Normal.otf
+++ b/resources/fonts/SourceHanSansJP-Normal.otf
--- a/resources/i18n/cs/QIDIStudio.mo
+++ b/resources/i18n/cs/QIDIStudio.mo
--- a/resources/i18n/de/QIDIStudio.mo
+++ b/resources/i18n/de/QIDIStudio.mo
--- a/resources/i18n/en/QIDIStudio.mo
+++ b/resources/i18n/en/QIDIStudio.mo
--- a/resources/i18n/es/QIDIStudio.mo
+++ b/resources/i18n/es/QIDIStudio.mo
--- a/resources/i18n/fr/QIDIStudio.mo
+++ b/resources/i18n/fr/QIDIStudio.mo
--- a/resources/i18n/hu/QIDIStudio.mo
+++ b/resources/i18n/hu/QIDIStudio.mo
--- a/resources/i18n/it/QIDIStudio.mo
+++ b/resources/i18n/it/QIDIStudio.mo
--- a/resources/i18n/ja/QIDIStudio.mo
+++ b/resources/i18n/ja/QIDIStudio.mo
--- a/resources/i18n/ko/QIDIStudio.mo
+++ b/resources/i18n/ko/QIDIStudio.mo
--- a/resources/i18n/nl/QIDIStudio.mo
+++ b/resources/i18n/nl/QIDIStudio.mo
--- a/resources/i18n/pl/QIDIStudio.mo
+++ b/resources/i18n/pl/QIDIStudio.mo
--- a/resources/i18n/pt-BR/QIDIStudio.mo
+++ b/resources/i18n/pt-BR/QIDIStudio.mo
--- a/resources/i18n/pt_br/QIDIStudio.mo
+++ b/resources/i18n/pt_br/QIDIStudio.mo
--- a/resources/i18n/ru/QIDIStudio.mo
+++ b/resources/i18n/ru/QIDIStudio.mo
--- a/resources/i18n/sv/QIDIStudio.mo
+++ b/resources/i18n/sv/QIDIStudio.mo
--- a/resources/i18n/tr/QIDIStudio.mo
+++ b/resources/i18n/tr/QIDIStudio.mo
--- a/resources/i18n/uk/QIDIStudio.mo
+++ b/resources/i18n/uk/QIDIStudio.mo
--- a/resources/i18n/zh_cn/QIDIStudio.mo
+++ b/resources/i18n/zh_cn/QIDIStudio.mo
--- a/resources/images/QIDIStudio-mac_128px.png
+++ b/resources/images/QIDIStudio-mac_128px.png
--- a/resources/images/QIDIStudio-mac_256px.ico
+++ b/resources/images/QIDIStudio-mac_256px.ico
--- a/resources/images/QIDIStudio.icns
+++ b/resources/images/QIDIStudio.icns
--- a/resources/images/QIDIStudio.ico
+++ b/resources/images/QIDIStudio.ico
--- a/resources/images/QIDIStudio.png
+++ b/resources/images/QIDIStudio.png
--- a/resources/images/QIDIStudio.svg
+++ b/resources/images/QIDIStudio.svg
@@ -1,19 +1,20 @@
 <?xml version="1.0" encoding="utf-8"?>
 <!-- Generator: Adobe Illustrator 25.0.0, SVG Export Plug-In . SVG Version: 6.00 Build 0)  -->
-<svg version="1.1" id="图层_2" xmlns="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3.org/1999/xlink" x="0px" y="0px"
-	  viewBox="0 0 256 256" enable-background="new 0 0 256 256" xml:space="preserve">
-<path style="fill:#FFFFFF;" d="M60,252c-30.9,0-56-25.1-56-56V60C4,29.1,29.1,4,60,4h136c30.9,0,56,25.1,56,56v136
-	c0,30.9-25.1,56-56,56H60z"/>
-<path style="fill:#4479FB;" d="M196,8c28.7,0,52,23.3,52,52v136c0,28.7-23.3,52-52,52H60c-28.7,0-52-23.3-52-52V60
-	C8,31.3,31.3,8,60,8H196 M196,0H60C26.9,0,0,26.9,0,60v136c0,33.1,26.9,60,60,60h136c33.1,0,60-26.9,60-60V60
-	C256,26.9,229.1,0,196,0L196,0z"/>
-<path style="fill:#4479FB;" d="M194.5,188.5c-7.6-3.5-15-7.5-22.2-11.8c-6.8-4.2-13.1-8.5-18.7-12.9c17.1-13.5,23.2-36.1,13.2-56.7
-	C154.1,81,120.5,67.9,91.6,78c-31.6,11-41,43-25.8,68.7c-48.2-53.1,7.3-123.8,85-99.8c26.2,8.1,48.9,25.8,60.8,50.2
-	C227.4,129.7,219.5,165.3,194.5,188.5z"/>
-<path style="fill:#4479FB;" d="M34.7,158.5c17.6,36.2,59,57.6,100.3,54.8c-16.2-6.1-32-16-45-29c-7.8-7.8-13.8-16-18.2-24.2
-	c-9.1-6.3-16.9-14.3-23-23.6C37.5,118.9,34.6,99.6,39,82C24.6,104.1,21.9,132.2,34.7,158.5L34.7,158.5z"/>
-<path style="fill:#4479FB;" d="M234.5,206.6c-28.2,6.1-68-4.1-97.8-26.7c-35.1-26.6-43.5-60.9-19.9-78.1c-8,18.8,7,47.1,40.6,71.4
-	C181.1,190.4,209.2,202,234.5,206.6z"/>
-<path style="fill:#4479FB;" d="M187.4,212.9c-29.6,5.2-68.1-7.9-94.8-34.2c-33-32.6-35.5-73.3-5.5-90.8c12-7,27.4-9.2,43.6-7.3
-	c-4.7,1.3-9.2,3.1-13.2,5.4c-30,17.5-26.8,58.9,7.2,92.4C142.6,196.1,165.4,208.1,187.4,212.9L187.4,212.9z"/>
+<svg version="1.1" id="图层_1" xmlns="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3.org/1999/xlink" x="0px" y="0px"
+	 viewBox="0 0 256 256" enable-background="new 0 0 256 256" xml:space="preserve">
+<g>
+	<path fill="#303AB2" d="M196,256H60c-33.1,0-60-26.9-60-60V60C0,26.9,26.9,0,60,0h136c33.1,0,60,26.9,60,60v136
+		C256,229.1,229.1,256,196,256z"/>
+</g>
+<g>
+	<path fill="#FFFFFF" d="M145,177.9v-13.2v-21.3c0-2.3,1.2-4.5,3.2-5.6l28.3-16.3l13-7.5V93c0-4.6-2.5-8.9-6.5-11.2l-57.8-33.4
+		c-4-2.3-8.9-2.3-13,0L54.5,81.8c-4,2.3-6.5,6.6-6.5,11.2v66.7c0,4.6,2.5,8.9,6.5,11.2l57.8,33.4c4,2.3,8.9,2.3,13,0l19.7-11.4l0,0
+		V177.9z M125.2,115.2c-4,2.3-6.5,6.6-6.5,11.2v55.4c0,5-5.4,8.1-9.7,5.6l-44.8-25.9c-2-1.2-3.2-3.3-3.2-5.6V96.7
+		c0-2.3,1.2-4.5,3.2-5.6l51.3-29.6c2-1.2,4.5-1.2,6.5,0l38.3,22.1c4.3,2.5,4.3,8.7,0,11.2L125.2,115.2z"/>
+</g>
+<g>
+	<path fill="#FFFFFF" d="M198.3,108.9l-8.8,5.1v18.2v1.8v22.1v7.5c0,2.3-1.2,4.4-3.2,5.5l0,0l-0.7,0.4l-0.9,0.5l-8.1,4.7l-5.2,3
+		L145,192.9l0,0v6.4v3.1v0.1c0,0,0,0,0,0v0.4c0.1,4.8,5.2,7.9,9.5,5.7l0.2-0.1l5.2-3l44.9-26c2-1.2,3.2-3.3,3.2-5.6v-59.4
+		C208,109.5,202.6,106.4,198.3,108.9z"/>
+</g>
 </svg>
--- a/resources/images/QIDIStudioTitle.ico
+++ b/resources/images/QIDIStudioTitle.ico
--- a/resources/images/QIDIStudio_128px.png
+++ b/resources/images/QIDIStudio_128px.png
--- a/resources/images/QIDIStudio_192px.png
+++ b/resources/images/QIDIStudio_192px.png
--- a/resources/images/QIDIStudio_192px_grayscale.png
+++ b/resources/images/QIDIStudio_192px_grayscale.png
--- a/resources/images/QIDIStudio_192px_transparent.png
+++ b/resources/images/QIDIStudio_192px_transparent.png
--- a/resources/images/QIDIStudio_32px.png
+++ b/resources/images/QIDIStudio_32px.png
--- a/resources/images/QIDIStudio_about.svg
+++ b/resources/images/QIDIStudio_about.svg
@@ -1,38 +1,47 @@
 <?xml version="1.0" encoding="utf-8"?>
 <!-- Generator: Adobe Illustrator 25.0.0, SVG Export Plug-In . SVG Version: 6.00 Build 0)  -->
 <svg version="1.1" id="图层_1" xmlns="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3.org/1999/xlink" x="0px" y="0px"
-	 width="562px" height="238px" viewBox="0 0 562 238" enable-background="new 0 0 562 238" xml:space="preserve">
-<rect x="1" y="0.5" fill="#4479FB" width="560" height="237"/>
-<path fill="#FFFFFF" d="M236.5,154.5l1.6,1.8c0.5-0.6,0.9-1.3,1.2-1.9c0.2-0.7,0.4-1.4,0.4-2.2c0-0.9-0.1-1.7-0.4-2.4
-	c-0.3-0.8-0.8-1.5-1.3-2c-0.6-0.6-1.3-1.1-2-1.4c-0.8-0.3-1.5-0.5-2.3-0.5c-0.8,0-1.6,0.2-2.4,0.5c-0.8,0.3-1.4,0.8-2,1.4
-	c-0.6,0.6-1.1,1.3-1.4,2c-0.3,0.8-0.4,1.6-0.4,2.4c0,1.8,0.6,3.3,1.8,4.5c1.2,1.2,2.7,1.8,4.5,1.8c0.5,0,0.9,0,1.4-0.2
-	c0.4-0.1,0.9-0.3,1.3-0.5l-3.1-3.3H236.5z M240,158.3l3.6,3.9h-3.3l-2.2-2.4c-0.8,0.4-1.5,0.7-2.3,0.9c-0.8,0.2-1.6,0.3-2.4,0.3
-	c-1.2,0-2.3-0.2-3.4-0.7c-1.1-0.4-2.1-1.1-2.9-1.9c-0.9-0.8-1.5-1.8-2-2.9s-0.7-2.2-0.7-3.4s0.2-2.3,0.7-3.4c0.4-1.1,1.1-2,2-2.9
-	c0.8-0.8,1.8-1.5,2.9-1.9c1.1-0.4,2.3-0.7,3.5-0.7c1.2,0,2.4,0.2,3.5,0.7c1.1,0.4,2.1,1.1,2.9,1.9c0.8,0.8,1.5,1.8,1.9,2.9
-	c0.5,1.1,0.7,2.2,0.7,3.4c0,1.2-0.2,2.3-0.7,3.3C241.4,156.5,240.8,157.5,240,158.3L240,158.3z M245.8,160.6v-17h2.8v17H245.8z
-	 M255.5,158.1h2.3c1.3,0,2.2-0.1,2.9-0.3c0.6-0.2,1.2-0.5,1.7-0.9c0.6-0.5,1.1-1.2,1.4-2c0.3-0.8,0.5-1.8,0.5-2.8s-0.2-2-0.5-2.8
-	c-0.3-0.8-0.8-1.5-1.4-2c-0.5-0.4-1.1-0.7-1.7-0.9c-0.7-0.2-1.7-0.3-3.1-0.3h-1h-1V158.1z M252.7,160.6v-17h3.7
-	c2.4,0,4.1,0.1,5.1,0.4c1,0.2,1.8,0.7,2.6,1.2c1,0.8,1.7,1.7,2.2,2.9s0.8,2.5,0.8,4s-0.2,2.8-0.8,4c-0.5,1.2-1.2,2.1-2.2,2.9
-	c-0.8,0.6-1.6,1-2.5,1.2c-0.9,0.3-2.4,0.4-4.4,0.4h-0.8H252.7z M270.4,160.6v-17h2.8v17H270.4z"/>
-<path fill="#FFFFFF" d="M282.7,160.6v-13h-3.8v-4h12.2v4h-3.8v13H282.7z M293.5,160.6v-17h10.4v3.7H298v2.9h5.6v3.6H298v2.9h5.9v3.8
-	H293.5z M319.4,144.3v5c-0.6-0.7-1.3-1.2-1.9-1.5c-0.6-0.3-1.3-0.5-2-0.5c-1.3,0-2.4,0.4-3.2,1.4c-0.8,0.9-1.2,2.1-1.2,3.5
-	c0,1.4,0.4,2.5,1.2,3.4c0.8,0.9,1.9,1.3,3.2,1.3c0.7,0,1.4-0.2,2-0.5c0.6-0.3,1.3-0.8,1.9-1.5v5.1c-0.8,0.4-1.5,0.6-2.2,0.8
-	c-0.7,0.2-1.5,0.3-2.2,0.3c-0.9,0-1.8-0.1-2.6-0.3c-0.8-0.2-1.5-0.6-2.2-1c-1.3-0.8-2.2-1.9-2.9-3.2c-0.7-1.3-1-2.7-1-4.4
-	c0-1.3,0.2-2.5,0.6-3.5c0.4-1.1,1.1-2,1.9-2.9c0.8-0.8,1.7-1.5,2.7-1.9c1-0.4,2.1-0.6,3.4-0.6c0.7,0,1.5,0.1,2.2,0.3
-	C318,143.7,318.7,143.9,319.4,144.3L319.4,144.3z M322.2,160.6v-17h4.6v6.6h6.2v-6.6h4.6v17H333v-6.9h-6.2v6.9H322.2z"/>
-<path fill-rule="evenodd" clip-rule="evenodd" fill="#FFFFFF" d="M247.2,112.8c6.5,13.4,21.8,21.3,37.1,20.3
-	c-6-2.3-11.8-5.9-16.6-10.7c-2.9-2.9-5.1-5.9-6.7-8.9c-3.3-2.3-6.2-5.3-8.5-8.7c-4.2-6.5-5.2-13.6-3.6-20.1
-	C243.5,92.7,242.5,103.1,247.2,112.8L247.2,112.8z M292.4,131.7c0.2-0.1,0.5-0.1,0.7-0.2l-1.8-0.3
-	C291.7,131.3,292,131.5,292.4,131.7L292.4,131.7z M300.6,128.2c1.4-0.8,2.7-1.7,3.9-2.7c-3.2-1.4-6.3-3-9.3-4.7
-	c-0.5,0.1-1.1,0.2-1.6,0.4l7.8,5.4L300.6,128.2z M306.3,123.9c7.2-6.8,10.6-16.3,8.9-26c0.8,9.6-6.1,18.1-16.7,21.8
-	C301,121.3,303.6,122.7,306.3,123.9L306.3,123.9z"/>
-<path fill="#FFFFFF" d="M306.3,123.9c-2.8-1.3-5.6-2.8-8.2-4.4c-2.5-1.5-4.8-3.1-6.9-4.8c6.3-5,8.6-13.3,4.9-21
-	c-4.7-9.6-17.1-14.5-27.8-10.8c-11.7,4.1-15.2,15.9-9.5,25.4c-17.8-19.6,2.7-45.7,31.4-36.9c9.7,3,18.1,9.5,22.5,18.5
-	C318.4,102.2,315.5,115.4,306.3,123.9z"/>
-<path fill="#FFFFFF" d="M247.2,112.8c6.5,13.4,21.8,21.3,37,20.3c-6-2.3-11.8-5.9-16.6-10.7c-2.9-2.9-5.1-5.9-6.7-8.9
-	c-3.3-2.3-6.3-5.3-8.5-8.7c-4.2-6.5-5.2-13.6-3.6-20.1C243.5,92.7,242.5,103.1,247.2,112.8L247.2,112.8z"/>
-<path fill="#FFFFFF" d="M321.1,130.6c-10.4,2.2-25.1-1.5-36.1-9.9c-13-9.8-16.1-22.5-7.4-28.8c-2.9,7,2.6,17.4,15,26.4
-	C301.3,124.6,311.7,128.9,321.1,130.6z"/>
-<path fill="#FFFFFF" d="M303.7,132.9c-10.9,1.9-25.2-2.9-35-12.6c-12.2-12.1-13.1-27.1-2-33.5c4.4-2.6,10.1-3.4,16.1-2.7
-	c-1.8,0.5-3.4,1.1-4.9,2c-11.1,6.5-9.9,21.8,2.6,34.1C287.1,126.7,295.5,131.2,303.7,132.9L303.7,132.9z"/>
+	 viewBox="0 0 562 238" enable-background="new 0 0 562 238" xml:space="preserve">
+<rect fill="#303AB2" width="562" height="238"/>
+<g>
+	<g>
+		<g>
+			<path fill="#FFFFFF" d="M335.8,111.2h-7.3c-1.1,0-2,0.9-2,2v27.7c0,1.1,0.9,2,2,2h7.3c1.1,0,2-0.9,2-2v-27.7
+				C337.8,112.1,336.9,111.2,335.8,111.2z"/>
+			<path fill="#FFFFFF" d="M333.3,104.4h-2.5c-2.4,0-4.4-2-4.4-4.4v-2.5c0-2.4,2-4.4,4.4-4.4h2.5c2.4,0,4.4,2,4.4,4.4v2.5
+				C337.8,102.4,335.8,104.4,333.3,104.4z"/>
+		</g>
+		<g>
+			<path fill="#FFFFFF" d="M419.5,111.2h-7.3c-1.1,0-2,0.9-2,2v27.7c0,1.1,0.9,2,2,2h7.3c1.1,0,2-0.9,2-2v-27.7
+				C421.5,112.1,420.6,111.2,419.5,111.2z"/>
+			<path fill="#FFFFFF" d="M417.1,104.4h-2.5c-2.4,0-4.4-2-4.4-4.4v-2.5c0-2.4,2-4.4,4.4-4.4h2.5c2.4,0,4.4,2,4.4,4.4v2.5
+				C421.5,102.4,419.5,104.4,417.1,104.4z"/>
+		</g>
+		<path fill="#FFFFFF" d="M380.2,93.1h-3h-4.6h-8.8h-4H351c-1.1,0-2,0.9-2,2v7.3c0,1.1,0.9,2,2,2h8.8v0h12.8h1.4h3.2h2.5
+			c4.4,0,7.9,3.5,7.9,7.9v5.7v0v5.7c0,4.4-3.5,7.9-7.9,7.9H374h-5.2h-0.5h-5.9c-1.1,0-2-0.9-2-2v-5.9V122v-0.5V120c0-1.1-0.9-2-2-2
+			H351c-1.1,0-2,0.9-2,2v1.5h0v19.4c0,1.1,0.9,2,2,2h0.8h8.5h6c0.5,0,0.9,0.1,1.4,0.1c0,0,0,0,0,0v0h12.5c10.3,0,18.7-8.4,18.7-18.7
+			V118v0v-6.2C398.9,101.5,390.5,93.1,380.2,93.1z"/>
+		<g>
+			<path fill="#FFFFFF" d="M296.5,93.1C296.5,93.1,296.5,93.1,296.5,93.1L296.5,93.1H284c-10.3,0-18.7,8.4-18.7,18.7v2.3v3.9v0v5.7
+				v0.5c0,10.3,8.4,18.7,18.7,18.7h4.3c1.1,0,2-0.9,2-2v-7.3c0-1.1-0.9-2-2-2h-3.7c-4.4,0-7.9-3.5-7.9-7.9V118v0v-3.9v-1.8
+				c0-4.4,3.5-7.9,7.9-7.9h11.4c4.4,0,7.9,3.5,7.9,7.9v3.7c0,1.1,0.9,2,2,2h7.3c1.1,0,2-0.9,2-2v-4.1c0,0,0-0.1,0-0.1
+				C315.1,101.4,306.8,93.1,296.5,93.1z"/>
+			<g>
+				<path fill="#FFFFFF" d="M314.6,134.4l-15.8-15.8c-0.4-0.4-0.9-0.6-1.4-0.6l-10.4,0c-1.8,0-2.6,2.1-1.4,3.4l21,21
+					c0.8,0.8,2,0.8,2.8,0l5.2-5.2C315.3,136.4,315.3,135.1,314.6,134.4z"/>
+			</g>
+		</g>
+	</g>
+	<g>
+		<g>
+			<path fill="#FFFFFF" d="M199.7,149.5v-8.1v-13c0-1.4,0.8-2.7,2-3.4l17.3-10l7.9-4.6V97.6c0-2.8-1.5-5.4-4-6.8l-35.3-20.4
+				c-2.4-1.4-5.5-1.4-7.9,0l-35.3,20.4c-2.4,1.4-4,4-4,6.8v40.7c0,2.8,1.5,5.4,4,6.8l35.3,20.4c2.4,1.4,5.5,1.4,7.9,0l12-7l0,0
+				V149.5z M187.6,111.2c-2.4,1.4-3.9,4-3.9,6.8v33.8c0,3-3.3,4.9-5.9,3.4l-27.3-15.8c-1.2-0.7-2-2-2-3.4V99.9c0-1.4,0.8-2.7,2-3.4
+				l31.3-18.1c1.2-0.7,2.7-0.7,4,0L209,91.9c2.6,1.5,2.6,5.3,0,6.8L187.6,111.2z"/>
+		</g>
+		<path fill="#FFFFFF" d="M232.2,107.3l-5.4,3.1v11.1v1.1v13.5v4.6c0,1.4-0.8,2.7-2,3.3l0,0l-0.4,0.2l-0.6,0.3l-5,2.9l-3.2,1.8
+			l-16,9.3l0,0v3.9v1.9v0.1c0,0,0,0,0,0v0.2c0.1,2.9,3.2,4.8,5.8,3.5l0.1-0.1l3.2-1.8l27.4-15.9c1.2-0.7,2-2,2-3.4v-36.2
+			C238.1,107.7,234.8,105.8,232.2,107.3z"/>
+	</g>
+</g>
 </svg>
--- a/resources/images/add_text_modifier.svg
+++ b/resources/images/add_text_modifier.svg
@@ -0,0 +1 @@
+<svg xmlns="http://www.w3.org/2000/svg" width="16" height="16" viewBox="0 0 16 16"><path d="M6.5,14.5a1,1,0,0,1-1-1v-9h-4a1,1,0,0,1-1-1v-2a1,1,0,0,1,1-1h12a1,1,0,0,1,1,1v2a1,1,0,0,1-1,1h-4v2" style="fill:none;stroke:#949494;stroke-linecap:round;stroke-linejoin:round"/><line x1="8.5" y1="8.5" x2="14.5" y2="14.5" style="fill:none;stroke:#009688;stroke-linejoin:round"/><line x1="14.5" y1="8.5" x2="8.5" y2="14.5" style="fill:none;stroke:#009688;stroke-linejoin:round"/><line x1="11.5" y1="8.5" x2="11.5" y2="14.5" style="fill:none;stroke:#009688;stroke-linecap:square;stroke-linejoin:round"/><line x1="14.5" y1="11.5" x2="8.5" y2="11.5" style="fill:none;stroke:#009688;stroke-linecap:square;stroke-linejoin:round"/></svg>
--- a/resources/images/add_text_negative.svg
+++ b/resources/images/add_text_negative.svg
@@ -0,0 +1 @@
+<svg xmlns="http://www.w3.org/2000/svg" width="16" height="16" viewBox="0 0 16 16"><path d="M6.5,14.5a1,1,0,0,1-1-1v-9h-4a1,1,0,0,1-1-1v-2a1,1,0,0,1,1-1h12a1,1,0,0,1,1,1v2a1,1,0,0,1-1,1h-4v2" style="fill:none;stroke:#949494;stroke-linecap:round;stroke-linejoin:round"/><path d="M15,11.5A3.5,3.5,0,1,1,11.5,8,3.5,3.5,0,0,1,15,11.5ZM14,11H9v1h5Z" style="fill:#009688"/></svg>
--- a/resources/images/add_text_part.svg
+++ b/resources/images/add_text_part.svg
@@ -0,0 +1 @@
+<svg xmlns="http://www.w3.org/2000/svg" width="16" height="16" viewBox="0 0 16 16"><path d="M6.5,14.5a1,1,0,0,1-1-1v-9h-4a1,1,0,0,1-1-1v-2a1,1,0,0,1,1-1h12a1,1,0,0,1,1,1v2a1,1,0,0,1-1,1h-4v2" style="fill:none;stroke:#949494;stroke-linecap:round;stroke-linejoin:round"/><path d="M15,11.5A3.5,3.5,0,1,1,11.5,8,3.5,3.5,0,0,1,15,11.5ZM14,11H12V9H11v2H9v1h2v2h1V12h2Z" style="fill:#009688"/></svg>
--- a/resources/images/bind_device_ping_code_dark.svg
+++ b/resources/images/bind_device_ping_code_dark.svg
@@ -0,0 +1,3 @@
+<svg width="8" height="8" viewBox="0 0 8 8" fill="none" xmlns="http://www.w3.org/2000/svg">
+<path d="M3.346 0.361999H5.068V3.078H7.77V4.786H5.068V7.502H3.346V4.786H0.63V3.078H3.346V0.361999Z" fill="white"/>
+</svg>
--- a/resources/images/bind_device_ping_code_light.svg
+++ b/resources/images/bind_device_ping_code_light.svg
--- a/resources/images/cali_fdc_editing_diagram.png
+++ b/resources/images/cali_fdc_editing_diagram.png
--- a/resources/images/cali_fdc_editing_diagram_CN.png
+++ b/resources/images/cali_fdc_editing_diagram_CN.png
--- a/resources/images/gcode.icns
+++ b/resources/images/gcode.icns
--- a/resources/images/menu_obj_svg.svg
+++ b/resources/images/menu_obj_svg.svg
@@ -0,0 +1 @@
+<svg xmlns="http://www.w3.org/2000/svg" width="16" height="16" viewBox="0 0 16 16"><line x1="2.5" y1="1.5" x2="12.5" y2="1.5" style="fill:none;stroke:#949494;stroke-linecap:round;stroke-linejoin:round;opacity:0.5"/><path d="M1.541,12.5A12,12,0,0,1,12.5,1.541" style="fill:none;stroke:#949494;stroke-linecap:round;stroke-linejoin:round"/><rect x="12.5" y="0.5" width="2" height="2" style="fill:none;stroke:#949494;stroke-linecap:round;stroke-linejoin:round"/><rect x="0.5" y="12.5" width="2" height="2" style="fill:none;stroke:#949494;stroke-linecap:round;stroke-linejoin:round"/><circle cx="1.5" cy="1.5" r="1.5" style="fill:#949494"/></svg>
--- a/resources/images/menu_obj_text.svg
+++ b/resources/images/menu_obj_text.svg
@@ -0,0 +1 @@
+<svg xmlns="http://www.w3.org/2000/svg" width="16" height="16" viewBox="0 0 16 16"><path d="M6.5,14.5h2a1,1,0,0,0,1-1v-9h4a1,1,0,0,0,1-1v-2a1,1,0,0,0-1-1H1.5a1,1,0,0,0-1,1v2a1,1,0,0,0,1,1h4v9a1,1,0,0,0,1,1" style="fill:none;stroke:#949494;stroke-linecap:round;stroke-linejoin:round"/></svg>
--- a/resources/images/param_archimedeanchords.svg
+++ b/resources/images/param_archimedeanchords.svg
@@ -1,7 +1,7 @@
 <svg width="10" height="10" viewBox="0 0 10 10" fill="none" xmlns="http://www.w3.org/2000/svg">
 <g clip-path="url(#clip0_8986_34986)">
 <rect x="0.906738" y="0.75" width="8.18652" height="8.5" rx="0.25" stroke="#262E30" stroke-width="0.5"/>
-<path fill-rule="evenodd" clip-rule="evenodd" d="M8.44384 9.15385H8.70117C8.97731 9.15385 9.20117 8.92999 9.20117 8.65385V7.77134C9.01185 8.27195 8.7555 8.73679 8.44384 9.15385ZM9.20117 3.82879C8.50648 2.15978 6.91732 1 5.07962 1C3.0001 1 1.29827 2.76362 1.29827 4.96686C1.29827 6.81838 2.72798 8.30496 4.47852 8.30496C5.94047 8.30496 7.13782 7.06157 7.13782 5.51178C7.13782 4.20557 6.13326 3.17131 4.91131 3.17131C3.89774 3.17131 3.05347 4.0379 3.05347 5.12614C3.05347 6.02995 3.75348 6.74564 4.59072 6.74564C5.28371 6.74564 5.8635 6.1557 5.8635 5.40279C5.8635 4.78402 5.3879 4.30307 4.82315 4.30307C4.36259 4.30307 3.97515 4.69181 3.97515 5.20159C3.97515 5.6122 4.29181 5.93245 4.66286 5.93245C4.95511 5.93245 5.2063 5.68623 5.2063 5.35249C5.2063 5.09421 5.0032 4.89829 4.78307 4.89829C4.68224 4.89829 4.62549 4.93068 4.59194 4.96752C4.55575 5.00726 4.52157 5.08014 4.52157 5.20159C4.52157 5.31575 4.54634 5.35545 4.55458 5.36503L4.55474 5.36522C4.55684 5.36774 4.5704 5.38402 4.62626 5.38915C4.62683 5.38149 4.62732 5.3728 4.62771 5.36297C4.62901 5.32972 4.62886 5.29548 4.62868 5.25362V5.25361L4.62853 5.20159C4.62853 5.06352 4.74046 4.95159 4.87853 4.95159C5.0166 4.95159 5.12853 5.06352 5.12853 5.20159L5.12866 5.24197C5.12886 5.28728 5.12909 5.33744 5.12732 5.38257C5.12499 5.44205 5.11881 5.51557 5.09642 5.58704C5.07283 5.66237 5.02736 5.7474 4.93969 5.80987C4.85359 5.87123 4.75495 5.89069 4.66286 5.89069C4.4794 5.89069 4.30122 5.83726 4.17547 5.69103C4.0562 5.55233 4.02157 5.37247 4.02157 5.20159C4.02157 4.98771 4.08286 4.78393 4.22227 4.63086C4.36432 4.47488 4.56332 4.39829 4.78307 4.39829C5.3003 4.39829 5.7063 4.8395 5.7063 5.35249C5.7063 5.94093 5.25221 6.43245 4.66286 6.43245C3.992 6.43245 3.47515 5.86406 3.47515 5.20159C3.47515 4.4371 4.06549 3.80307 4.82315 3.80307C5.685 3.80307 6.3635 4.52932 6.3635 5.40279C6.3635 6.41041 5.58081 7.24564 4.59072 7.24564C3.45638 7.24564 2.55347 6.28465 2.55347 5.12614C2.55347 3.7832 3.60064 2.67131 4.91131 2.67131C6.43036 2.67131 7.63782 3.95086 7.63782 5.51178C7.63782 7.31536 6.23845 8.80496 4.47852 8.80496C2.43013 8.80496 0.798266 7.07231 0.798266 4.96686C0.798266 2.50892 2.703 0.5 5.07962 0.5C6.79575 0.5 8.30297 1.40023 9.20117 2.76765V3.82879Z" fill="#262E30"/>
+<path fill-rule="evenodd" clip-rule="evenodd" d="M 8.4438 9.1539 H 8.7012 C 8.9773 9.1539 9.2012 8.93 9.2012 8.6539 V 7.7713 C 9.0119 8.272 8.7555 8.7368 8.4438 9.1539 Z M 9.2012 3.8288 C 8.5065 2.1598 6.93 1.034 5.083 1.017 C 2.782 1.027 1.06 2.838 1.055 4.949 C 1.093 7.012 2.315 8.449 4.443 8.472 C 6.229 8.469 7.388 7.067 7.388 5.597 C 7.375 4.094 6.057 3.257 5.137 3.255 C 4.05 3.261 3.288 3.912 3.282 4.997 C 3.286 5.783 3.937 6.291 4.447 6.291 C 5.047 6.277 5.255 5.872 5.259 5.666 C 5.261 5.432 5.065 5.307 4.866 5.481 C 4.53 5.663 4.244 5.057 4.942 4.827 C 5.359 4.73 5.766 5.095 5.77 5.568 C 5.759 6.389 5.152 6.798 4.434 6.814 C 3.429 6.803 2.728 5.942 2.732 4.984 C 2.737 3.612 3.784 2.734 5.14 2.73 C 6.549 2.743 7.93 3.946 7.939 5.584 C 7.922 7.596 6.442 9.017 4.474 9.021 C 2.65 8.999 1.659 8.176 0.848 6.941 C 0.842 6.291 0.848 5.943 0.841 4.933 C 0.842 4.454 0.837 3.979 0.842 3.234 C 1.231 2.331 2.398 0.508 5.0796 0.5 C 6.7957 0.5 8.303 1.4002 9.2012 2.7677 V 3.8288 Z" fill="#262E30"/>
 </g>
 <defs>
 <clipPath id="clip0_8986_34986">
--- a/resources/images/splash_logo.svg
+++ b/resources/images/splash_logo.svg
@@ -1,30 +1,20 @@
 <?xml version="1.0" encoding="utf-8"?>
 <!-- Generator: Adobe Illustrator 25.0.0, SVG Export Plug-In . SVG Version: 6.00 Build 0)  -->
-<svg version="1.1" id="图层_2" xmlns="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3.org/1999/xlink" x="0px" y="0px"
-	 width="256px" height="256px" viewBox="0 0 256 256" enable-background="new 0 0 256 256" xml:space="preserve">
+<svg version="1.1" id="图层_1" xmlns="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3.org/1999/xlink" x="0px" y="0px"
+	 viewBox="0 0 256 256" enable-background="new 0 0 256 256" xml:space="preserve">
 <g>
-	<path fill="#FFFFFF" d="M60,252c-30.9,0-56-25.1-56-56V60C4,29.1,29.1,4,60,4h136c30.9,0,56,25.1,56,56v136c0,30.9-25.1,56-56,56
-		H60z"/>
-	<g>
-		<path fill="#4479FB" d="M196,8c28.7,0,52,23.3,52,52v136c0,28.7-23.3,52-52,52H60c-28.7,0-52-23.3-52-52V60C8,31.3,31.3,8,60,8
-			H196 M196,0H60C26.9,0,0,26.9,0,60v136c0,33.1,26.9,60,60,60h136c33.1,0,60-26.9,60-60V60C256,26.9,229.1,0,196,0L196,0z"/>
-	</g>
+	<path fill="#303AB2" d="M196,256H60c-33.1,0-60-26.9-60-60V60C0,26.9,26.9,0,60,0h136c33.1,0,60,26.9,60,60v136
+		C256,229.1,229.1,256,196,256z"/>
 </g>
 <g>
-	<path fill="#4479FB" d="M194.5,188.5c-7.6-3.5-15-7.5-22.2-11.8c-6.8-4.2-13.1-8.5-18.7-12.9c17.1-13.5,23.2-36.1,13.2-56.7
-		c-12.7-26.1-46.3-39.2-75.2-29.1c-31.6,11-41,43-25.8,68.7c-48.2-53.1,7.3-123.8,85-99.8c26.2,8.1,48.9,25.8,60.8,50.2
-		C227.4,129.7,219.5,165.3,194.5,188.5z"/>
+	<path fill="#FFFFFF" d="M145,177.9v-13.2v-21.3c0-2.3,1.2-4.5,3.2-5.6l28.3-16.3l13-7.5V93c0-4.6-2.5-8.9-6.5-11.2l-57.8-33.4
+		c-4-2.3-8.9-2.3-13,0L54.5,81.8c-4,2.3-6.5,6.6-6.5,11.2v66.7c0,4.6,2.5,8.9,6.5,11.2l57.8,33.4c4,2.3,8.9,2.3,13,0l19.7-11.4l0,0
+		V177.9z M125.2,115.2c-4,2.3-6.5,6.6-6.5,11.2v55.4c0,5-5.4,8.1-9.7,5.6l-44.8-25.9c-2-1.2-3.2-3.3-3.2-5.6V96.7
+		c0-2.3,1.2-4.5,3.2-5.6l51.3-29.6c2-1.2,4.5-1.2,6.5,0l38.3,22.1c4.3,2.5,4.3,8.7,0,11.2L125.2,115.2z"/>
 </g>
 <g>
-	<path fill="#4479FB" d="M34.7,158.5c17.6,36.2,59,57.6,100.3,54.8c-16.2-6.1-32-16-45-29c-7.8-7.8-13.8-16-18.2-24.2
-		c-9.1-6.3-16.9-14.3-23-23.6C37.5,118.9,34.6,99.6,39,82C24.6,104.1,21.9,132.2,34.7,158.5L34.7,158.5z"/>
-</g>
-<g>
-	<path fill="#4479FB" d="M234.5,206.6c-28.2,6.1-68-4.1-97.8-26.7c-35.1-26.6-43.5-60.9-19.9-78.1c-8,18.8,7,47.1,40.6,71.4
-		C181.1,190.4,209.2,202,234.5,206.6z"/>
-</g>
-<g>
-	<path fill="#4479FB" d="M187.4,212.9c-29.6,5.2-68.1-7.9-94.8-34.2c-33-32.6-35.5-73.3-5.5-90.8c12-7,27.4-9.2,43.6-7.3
-		c-4.7,1.3-9.2,3.1-13.2,5.4c-30,17.5-26.8,58.9,7.2,92.4C142.6,196.1,165.4,208.1,187.4,212.9L187.4,212.9z"/>
+	<path fill="#FFFFFF" d="M198.3,108.9l-8.8,5.1v18.2v1.8v22.1v7.5c0,2.3-1.2,4.4-3.2,5.5l0,0l-0.7,0.4l-0.9,0.5l-8.1,4.7l-5.2,3
+		L145,192.9l0,0v6.4v3.1v0.1c0,0,0,0,0,0v0.4c0.1,4.8,5.2,7.9,9.5,5.7l0.2-0.1l5.2-3l44.9-26c2-1.2,3.2-3.3,3.2-5.6v-59.4
+		C208,109.5,202.6,106.4,198.3,108.9z"/>
 </g>
 </svg>
--- a/resources/images/step_mesh_info.svg
+++ b/resources/images/step_mesh_info.svg
@@ -0,0 +1,5 @@
+<svg width="407" height="141" viewBox="0 0 407 141" fill="none" xmlns="http://www.w3.org/2000/svg">
+<path d="M29.635 14.6721L70.408 1.42417L111.181 14.6721L136.38 49.3557V92.2269L111.181 126.91L70.408 140.158L29.635 126.91L4.43594 92.2269V49.3557L29.635 14.6721Z" stroke="#262E30"/>
+<path d="M309.925 6.6897L336.476 1.40823L363.028 6.6897L385.538 21.7301L400.578 44.2396L405.859 70.7913L400.578 97.343L385.538 119.852L363.028 134.893L336.476 140.174L309.925 134.893L287.415 119.852L272.375 97.343L267.093 70.7913L272.375 44.2395L287.415 21.7301L309.925 6.6897Z" stroke="#262E30"/>
+<path d="M257.937 80.4962C258.328 80.1057 258.328 79.4725 257.937 79.082L251.573 72.718C251.183 72.3275 250.549 72.3275 250.159 72.718C249.768 73.1085 249.768 73.7417 250.159 74.1322L255.816 79.7891L250.159 85.4459C249.768 85.8364 249.768 86.4696 250.159 86.8601C250.549 87.2507 251.183 87.2507 251.573 86.8601L257.937 80.4962ZM152 80.7891L257.23 80.7891L257.23 78.7891L152 78.7891L152 80.7891Z" fill="#262E30"/>
+</svg>
--- a/resources/images/svg_modifier.svg
+++ b/resources/images/svg_modifier.svg
@@ -0,0 +1 @@
+<svg xmlns="http://www.w3.org/2000/svg" width="16" height="16" viewBox="0 0 16 16"><line x1="2.5" y1="1.5" x2="12.5" y2="1.5" style="fill:none;stroke:#949494;stroke-linecap:round;stroke-linejoin:round;opacity:0.5"/><line x1="8.5" y1="8.5" x2="14.5" y2="14.5" style="fill:none;stroke:#009688;stroke-linejoin:round"/><line x1="14.5" y1="8.5" x2="8.5" y2="14.5" style="fill:none;stroke:#009688;stroke-linejoin:round"/><line x1="11.5" y1="8.5" x2="11.5" y2="14.5" style="fill:none;stroke:#009688;stroke-linecap:square;stroke-linejoin:round"/><line x1="14.5" y1="11.5" x2="8.5" y2="11.5" style="fill:none;stroke:#009688;stroke-linecap:square;stroke-linejoin:round"/><path d="M1.541,12.5A12,12,0,0,1,12.5,1.541" style="fill:none;stroke:#009688;stroke-linecap:round;stroke-linejoin:round"/><rect x="12.5" y="0.5" width="2" height="2" style="fill:none;stroke:#949494;stroke-linecap:round;stroke-linejoin:round"/><rect x="0.5" y="12.5" width="2" height="2" style="fill:none;stroke:#949494;stroke-linecap:round;stroke-linejoin:round"/><circle cx="1.5" cy="1.5" r="1.5" style="fill:#949494"/></svg>
--- a/resources/images/svg_negative.svg
+++ b/resources/images/svg_negative.svg
@@ -0,0 +1 @@
+<svg xmlns="http://www.w3.org/2000/svg" width="16" height="16" viewBox="0 0 16 16"><path d="M15,11.5A3.5,3.5,0,1,1,11.5,8,3.5,3.5,0,0,1,15,11.5ZM14,11H9v1h5Z" style="fill:#009688"/><line x1="2.5" y1="1.5" x2="12.5" y2="1.5" style="fill:none;stroke:#949494;stroke-linecap:round;stroke-linejoin:round;opacity:0.5"/><path d="M1.541,12.5A12,12,0,0,1,12.5,1.541" style="fill:none;stroke:#009688;stroke-linecap:round;stroke-linejoin:round"/><rect x="12.5" y="0.5" width="2" height="2" style="fill:none;stroke:#949494;stroke-linecap:round;stroke-linejoin:round"/><rect x="0.5" y="12.5" width="2" height="2" style="fill:none;stroke:#949494;stroke-linecap:round;stroke-linejoin:round"/><circle cx="1.5" cy="1.5" r="1.5" style="fill:#949494"/></svg>
--- a/resources/images/svg_part.svg
+++ b/resources/images/svg_part.svg
@@ -0,0 +1 @@
+<svg xmlns="http://www.w3.org/2000/svg" width="16" height="16" viewBox="0 0 16 16"><path d="M15,11.5A3.5,3.5,0,1,1,11.5,8,3.5,3.5,0,0,1,15,11.5ZM14,11H12V9H11v2H9v1h2v2h1V12h2Z" style="fill:#009688"/><line x1="2.5" y1="1.5" x2="12.5" y2="1.5" style="fill:none;stroke:#949494;stroke-linecap:round;stroke-linejoin:round;opacity:0.5"/><path d="M1.541,12.5A12,12,0,0,1,12.5,1.541" style="fill:none;stroke:#009688;stroke-linecap:round;stroke-linejoin:round"/><rect x="12.5" y="0.5" width="2" height="2" style="fill:none;stroke:#949494;stroke-linecap:round;stroke-linejoin:round"/><rect x="0.5" y="12.5" width="2" height="2" style="fill:none;stroke:#949494;stroke-linecap:round;stroke-linejoin:round"/><circle cx="1.5" cy="1.5" r="1.5" style="fill:#949494"/></svg>
--- a/Show More
+++ b/Show More
Author	SHA1	Message	Date
wjyLearn	4baf9e41c5	fix PLA Matte temperature	2024-12-03 11:05:10 +08:00
QIDI TECH	dd004ebffd	fix some bug	2024-11-30 14:00:32 +08:00
QIDI TECH	1244542711	version update	2024-11-28 15:28:37 +08:00
QIDI TECH	ccb7e095e1	add new filament	2024-11-28 15:26:22 +08:00
QIDI TECH	79518648c0	update src	2024-11-28 15:23:54 +08:00
QIDI TECH	7eb6543991	update slic3r	2024-11-28 15:19:12 +08:00
QIDI TECH	a26696f35e	update libslic3r	2024-11-28 15:12:18 +08:00
QIDI TECH	459e7822db	update resources	2024-11-28 15:01:13 +08:00
QIDI TECH	22572c2286	Update translation	2024-11-28 14:54:15 +08:00
QIDI TECH	db50a0814e	Update dependency	2024-11-28 14:53:09 +08:00
sunsets	506ff7ad8c	stl	2024-11-18 13:36:51 +08:00
QIDI TECH	1fe739e6fc	version update	2024-10-25 14:53:19 +08:00
QIDI TECH	4514d58c47	Many issues have been optimized and fixed	2024-10-25 14:49:26 +08:00
QIDI TECH	b907b14a6c	Add PLA+	2024-10-25 14:45:56 +08:00
QIDI TECH	726068cf1e	Update translation	2024-10-25 14:43:53 +08:00
QIDI TECH	a7223f812f	version update	2024-09-29 08:43:33 +08:00
QIDI TECH	72571efb04	Optimized and fixed some bugs	2024-09-28 16:31:40 +08:00
QIDI TECH	cc186748ed	Optimization parameter	2024-09-28 16:29:36 +08:00
QIDI TECH	680346707d	Add Filament Web	2024-09-28 16:26:58 +08:00
QIDI TECH	e84f284825	Update translation	2024-09-28 16:24:06 +08:00
QIDI TECH	acc64cecdc	Update readme	2024-09-25 13:32:01 +08:00
QIDI TECH	47091be6d1	Add X-Plus 4 and update to 1.9.5.51	2024-09-20 20:22:49 +08:00
QIDI TECH	6b6ca4055c	Update logo	2024-09-20 17:57:41 +08:00
QIDI TECH	9195b9818d	Several new materials were added and the parameters were optimized	2024-09-20 09:44:58 +08:00
QIDI TECH	73e8cede50	Add QIDI model and opptimize user avatars	2024-09-20 09:38:18 +08:00
QIDI TECH	71eb63a2eb	Update translation	2024-09-20 09:17:28 +08:00
QIDI TECH	d842832b25	Updated to 1.9.5, and optimize calibration and device	2024-09-16 16:07:29 +08:00
QIDI TECH	fa251e0a9a	Update translation	2024-09-16 15:50:54 +08:00
QIDI TECH	b787d6f029	version update	2024-09-03 16:19:35 +08:00
QIDI TECH	4626916f7c	fix some bug	2024-09-03 16:11:08 +08:00
				`@@ -0,0 +1 @@`
				<svg xmlns="http://www.w3.org/2000/svg" width="16" height="16" viewBox="0 0 16 16"><path d="M6.5,14.5a1,1,0,0,1-1-1v-9h-4a1,1,0,0,1-1-1v-2a1,1,0,0,1,1-1h12a1,1,0,0,1,1,1v2a1,1,0,0,1-1,1h-4v2" style="fill:none;stroke:#949494;stroke-linecap:round;stroke-linejoin:round"/><line x1="8.5" y1="8.5" x2="14.5" y2="14.5" style="fill:none;stroke:#009688;stroke-linejoin:round"/><line x1="14.5" y1="8.5" x2="8.5" y2="14.5" style="fill:none;stroke:#009688;stroke-linejoin:round"/><line x1="11.5" y1="8.5" x2="11.5" y2="14.5" style="fill:none;stroke:#009688;stroke-linecap:square;stroke-linejoin:round"/><line x1="14.5" y1="11.5" x2="8.5" y2="11.5" style="fill:none;stroke:#009688;stroke-linecap:square;stroke-linejoin:round"/></svg>
				`@@ -0,0 +1 @@`
				`<svg xmlns="http://www.w3.org/2000/svg" width="16" height="16" viewBox="0 0 16 16"><path d="M6.5,14.5a1,1,0,0,1-1-1v-9h-4a1,1,0,0,1-1-1v-2a1,1,0,0,1,1-1h12a1,1,0,0,1,1,1v2a1,1,0,0,1-1,1h-4v2" style="fill:none;stroke:#949494;stroke-linecap:round;stroke-linejoin:round"/><path d="M15,11.5A3.5,3.5,0,1,1,11.5,8,3.5,3.5,0,0,1,15,11.5ZM14,11H9v1h5Z" style="fill:#009688"/></svg>`