Add WOOD PLA and UltraPA-CF25

qdt/i18n/QIDIStudio.pot

@@ -8719,12 +8719,11 @@ msgstr ""
 
 msgid ""
 "Enable pressure advance, auto calibration result will be overwriten once "
-"enabled. Useless for QIDI Printer"
+"enabled."
 msgstr ""
 
 msgid ""
-"Pressure advance(Klipper) AKA Linear advance factor(Marlin). Useless for "
+"Pressure advance(Klipper) AKA Linear advance factor(Marlin)."
-"QIDI Printer"
 msgstr ""
 
 msgid "Filament notes"

qdt/i18n/cs/QIDIStudio_cs.po

@@ -9252,17 +9252,16 @@ msgstr "Povolit předstih tlaku (PA)"
 
 msgid ""
 "Enable pressure advance, auto calibration result will be overwriten once "
-"enabled. Useless for QIDI Printer"
+"enabled."
 msgstr ""
 "Povolit předstih tlaku (PA), výsledek automatické kalibrace bude přepsán po "
-"aktivaci. Nepoužitelné pro tiskárny QIDI"
+"aktivaci"
 
 msgid ""
-"Pressure advance(Klipper) AKA Linear advance factor(Marlin). Useless for "
+"Pressure advance(Klipper) AKA Linear advance factor(Marlin)."
-"QIDI Printer"
 msgstr ""
 "Předstih tlaku (PA) (Klipper) AKA také známá jako faktor Linear advance "
-"(Marlin). Nepoužitelné pro tiskárny QIDI"
+"(Marlin)"
 
 msgid "Filament notes"
 msgstr ""

qdt/i18n/de/QIDIStudio_de.po

@@ -9707,18 +9707,16 @@ msgstr "Pressure Advance aktivieren"
 
 msgid ""
 "Enable pressure advance, auto calibration result will be overwriten once "
-"enabled. Useless for QIDI Printer"
+"enabled."
 msgstr ""
 "Pressure Advance aktivieren? Die Ergebnisse der automatischen Kalibrierung "
-"werden nach der Aktivierung überschrieben. Hinweis: Dies ist für QIDI-"
+"werden nach der Aktivierung überschrieben."
 "Drucker nutzlos."
 
 msgid ""
-"Pressure advance(Klipper) AKA Linear advance factor(Marlin). Useless for "
+"Pressure advance(Klipper) AKA Linear advance factor(Marlin)."
-"QIDI Printer"
 msgstr ""
-"Pressure Advance (Klipper) AKA Linear Advance (Marlin). Für QIDI-Drucker "
+"Pressure Advance (Klipper) AKA Linear Advance (Marlin)."
-"nutzlos"
 
 msgid "Filament notes"
 msgstr "Filament notes"

qdt/i18n/en/QIDIStudio_en.po

@@ -9471,17 +9471,15 @@ msgstr "Enable pressure advance"
 
 msgid ""
 "Enable pressure advance, auto calibration result will be overwriten once "
-"enabled. Useless for QIDI Printer"
+"enabled."
 msgstr ""
 "Enable pressure advance, auto calibration result will be overwriten once "
-"enabled. Useless for QIDI Printer"
+"enabled."
 
 msgid ""
-"Pressure advance(Klipper) AKA Linear advance factor(Marlin). Useless for "
+"Pressure advance(Klipper) AKA Linear advance factor(Marlin)."
-"QIDI Printer"
 msgstr ""
-"Pressure advance(Klipper) AKA Linear advance factor(Marlin). Useless for "
+"Pressure advance(Klipper) AKA Linear advance factor(Marlin)."
-"QIDI Printer"
 
 msgid "Filament notes"
 msgstr "Filament notes"

qdt/i18n/es/QIDIStudio_es.po

@@ -9672,18 +9672,16 @@ msgstr "Habilitar avance de presión"
 
 msgid ""
 "Enable pressure advance, auto calibration result will be overwriten once "
-"enabled. Useless for QIDI Printer"
+"enabled."
 msgstr ""
 "¿Habilitar el avance de presión? Los resultados de la calibración automática "
-"se sobrescribirán una vez activada. Nota: esto es inútil para las impresoras "
+"se sobrescribirán una vez activada."
-"QIDI."
 
 msgid ""
-"Pressure advance(Klipper) AKA Linear advance factor(Marlin). Useless for "
+"Pressure advance(Klipper) AKA Linear advance factor(Marlin)."
-"QIDI Printer"
 msgstr ""
 "Avance de presión (Klipper) también conocido como factor de avance lineal "
-"(Marlin). Es inútil para impresoras QIDI"
+"(Marlin)."
 
 msgid "Filament notes"
 msgstr "Filament notes"

qdt/i18n/fr/QIDIStudio_fr.po

@@ -9706,17 +9706,15 @@ msgstr "Activer l'avance à la pression"
 
 msgid ""
 "Enable pressure advance, auto calibration result will be overwriten once "
-"enabled. Useless for QIDI Printer"
+"enabled."
 msgstr ""
 "Activez l'avance de pression, le résultat de l'étalonnage automatique sera "
-"remplacé une fois activé. Inutile pour les Imprimantes QIDI"
+"remplacé une fois activé."
 
 msgid ""
-"Pressure advance(Klipper) AKA Linear advance factor(Marlin). Useless for "
+"Pressure advance(Klipper) AKA Linear advance factor(Marlin)."
-"QIDI Printer"
 msgstr ""
-"Pressure advance (Klipper) ou Linear advance factor (Marlin). Inutile pour "
+"Pressure advance (Klipper) ou Linear advance factor (Marlin)."
-"les imprimantes QIDI"
 
 msgid "Filament notes"
 msgstr "Filament notes"

qdt/i18n/hu/QIDIStudio_hu.po

@@ -9589,18 +9589,15 @@ msgstr "Nyomáselőtolás engedélyezése"
 
 msgid ""
 "Enable pressure advance, auto calibration result will be overwriten once "
-"enabled. Useless for QIDI Printer"
+"enabled."
 msgstr ""
 "Engedélyezed a nyomáselőtolást? Az automatikus kalibrálási eredmények az "
-"engedélyezés után felülíródnak. Megjegyzés: a QIDI nyomtatók számára ez a "
+"engedélyezés után felülíródnak."
-"funkció haszontalan"
 
 msgid ""
-"Pressure advance(Klipper) AKA Linear advance factor(Marlin). Useless for "
+"Pressure advance(Klipper) AKA Linear advance factor(Marlin)."
-"QIDI Printer"
 msgstr ""
 "Nyomáselőtolás (Klipper) vagy más néven lineáris előtolási tényező (Marlin). "
-"A QIDI nyomtatók számára ez a funkció haszontalan"
 
 msgid "Filament notes"
 msgstr "Filament notes"

qdt/i18n/it/QIDIStudio_it.po

@@ -9616,17 +9616,15 @@ msgstr "Abilita il pressure advance"
 
 msgid ""
 "Enable pressure advance, auto calibration result will be overwriten once "
-"enabled. Useless for QIDI Printer"
+"enabled."
 msgstr ""
 "Abilita il pressure advance, I risultati della calibrazione automatica "
-"verranno sovrascritti una volta abilitati. Inutile per le stampanti QIDI."
+"verranno sovrascritti una volta abilitati."
 
 msgid ""
-"Pressure advance(Klipper) AKA Linear advance factor(Marlin). Useless for "
+"Pressure advance(Klipper) AKA Linear advance factor(Marlin)."
-"QIDI Printer"
 msgstr ""
-"Pressure advance(Klipper) oppure Linear advance factor(Marlin). Inutile per "
+"Pressure advance(Klipper) oppure Linear advance factor(Marlin)."
-"le stampanti QIDI"
 
 msgid "Filament notes"
 msgstr "Filament notes"

qdt/i18n/ja/QIDIStudio_ja.po

@@ -9315,17 +9315,15 @@ msgstr "Enable pressure advance"
 
 msgid ""
 "Enable pressure advance, auto calibration result will be overwriten once "
-"enabled. Useless for QIDI Printer"
+"enabled."
 msgstr ""
 "Enable pressure advance? Auto calibration results will be overwritten once "
-"enabled. Note: this is useless for QIDI Printers."
+"enabled."
 
 msgid ""
-"Pressure advance(Klipper) AKA Linear advance factor(Marlin). Useless for "
+"Pressure advance(Klipper) AKA Linear advance factor(Marlin)."
-"QIDI Printer"
 msgstr ""
-"Pressure advance(Klipper) AKA Linear advance factor(Marlin). Useless for "
+"Pressure advance(Klipper) AKA Linear advance factor(Marlin)."
-"QIDI Printers"
 
 msgid "Filament notes"
 msgstr "Filament notes"

qdt/i18n/ko/QIDIStudio_ko.po

@@ -9371,17 +9371,14 @@ msgstr "압력 전진 활성화"
 
 msgid ""
 "Enable pressure advance, auto calibration result will be overwriten once "
-"enabled. Useless for QIDI Printer"
+"enabled."
 msgstr ""
-"압력 전진을 활성화하면 자동 교정 결과가 활성화되면 덮어쓰게 됩니다. QIDI 프"
+"압력 전진을 활성화하면 자동 교정 결과가 활성화되면 덮어쓰게 됩니다."
-"린터에는 쓸모가 없습니다."
 
 msgid ""
-"Pressure advance(Klipper) AKA Linear advance factor(Marlin). Useless for "
+"Pressure advance(Klipper) AKA Linear advance factor(Marlin)."
-"QIDI Printer"
 msgstr ""
-"압력 전진(Klipper) 일명 선형 전진 계수(Marlin)입니다. QIDI 프린터에는 쓸모"
+"압력 전진(Klipper) 일명 선형 전진 계수(Marlin)입니다."
-"가 없습니다."
 
 msgid "Filament notes"
 msgstr "필라멘트 노트"

qdt/i18n/nl/QIDIStudio_nl.po

@@ -9668,17 +9668,15 @@ msgstr "Pressure advance inschakelen"
 
 msgid ""
 "Enable pressure advance, auto calibration result will be overwriten once "
-"enabled. Useless for QIDI Printer"
+"enabled."
 msgstr ""
 "Schakel drukvooruitgang in, het automatische kalibratieresultaat wordt "
-"overschreven zodra het is ingeschakeld. Nutteloos voor QIDI Printer"
+"overschreven zodra het is ingeschakeld."
 
 msgid ""
-"Pressure advance(Klipper) AKA Linear advance factor(Marlin). Useless for "
+"Pressure advance(Klipper) AKA Linear advance factor(Marlin)."
-"QIDI Printer"
 msgstr ""
 "Drukvervroeging (Klipper) AKA Lineaire vervroegingsfactor (Marlin). "
-"Nutteloos voor QIDI Printer"
 
 msgid "Filament notes"
 msgstr "Filament notes"

qdt/i18n/pl/QIDIStudio_pl.po

@@ -9609,17 +9609,15 @@ msgstr "Włącz zaawansowane ciśnienie"
 
 msgid ""
 "Enable pressure advance, auto calibration result will be overwriten once "
-"enabled. Useless for QIDI Printer"
+"enabled."
 msgstr ""
 "Włącz zaawansowane ciśnienie, wynik automatycznej kalibracji zostanie "
-"nadpisany po włączeniu. Nieprzydatne dla drukarki QIDI"
+"nadpisany po włączeniu."
 
 msgid ""
-"Pressure advance(Klipper) AKA Linear advance factor(Marlin). Useless for "
+"Pressure advance(Klipper) AKA Linear advance factor(Marlin)."
-"QIDI Printer"
 msgstr ""
-"Pressure advance(Klipper) AKA Linear advance factor(Marlin). Nieprzydatne "
+"Pressure advance(Klipper) AKA Linear advance factor(Marlin)."
-"dla drukarek QIDI"
 
 msgid "Filament notes"
 msgstr "Notatki dotyczące Filamentu"

qdt/i18n/pt-BR/QIDIStudio_pt-BR.po

@@ -9590,17 +9590,16 @@ msgstr "Permitir avanço de pressão"
 
 msgid ""
 "Enable pressure advance, auto calibration result will be overwriten once "
-"enabled. Useless for QIDI Printer"
+"enabled."
 msgstr ""
 "Ative o avanço da pressão, o resultado da calibração automática será "
-"sobrescrito quando ativado. Inútil para a impressora QIDI"
+"sobrescrito quando ativado."
 
 msgid ""
-"Pressure advance(Klipper) AKA Linear advance factor(Marlin). Useless for "
+"Pressure advance(Klipper) AKA Linear advance factor(Marlin)."
-"QIDI Printer"
 msgstr ""
 "Avanço de pressão (Klipper), também conhecido como fator de avanço linear "
-"(Marlin). Inútil para a impressora QIDI"
+"(Marlin)."
 
 msgid "Filament notes"
 msgstr "Filament notes"

qdt/i18n/ru/QIDIStudio_ru.po

@@ -9809,19 +9809,16 @@ msgstr "Включить Pressure advance"
 
 msgid ""
 "Enable pressure advance, auto calibration result will be overwriten once "
-"enabled. Useless for QIDI Printer"
+"enabled."
 msgstr ""
 "Включить Pressure advance (Прогнозирование давления). Результат "
-"автокалибровки будет перезаписан после включения. Бесполезная функция для "
+"автокалибровки будет перезаписан после включения."
-"принтера QIDI."
 
 msgid ""
-"Pressure advance(Klipper) AKA Linear advance factor(Marlin). Useless for "
+"Pressure advance(Klipper) AKA Linear advance factor(Marlin)."
-"QIDI Printer"
 msgstr ""
 "Pressure advance (Прогнозирование давления) в прошивки Klipper, это одно и "
-"тоже что Linear advance в прошивке Marlin. Бесполезная функция для принтера "
+"тоже что Linear advance в прошивке Marlin."
-"QIDI."
 
 msgid "Filament notes"
 msgstr "Примечание о прутке"

qdt/i18n/sv/QIDIStudio_sv.po

@@ -9514,17 +9514,15 @@ msgstr "Aktivera pressure advance"
 
 msgid ""
 "Enable pressure advance, auto calibration result will be overwriten once "
-"enabled. Useless for QIDI Printer"
+"enabled."
 msgstr ""
 "Aktivera pressure advance? Auto kalibrerings resultat kommer att skrivas "
-"över när de har aktiverats. Värdelöst för QIDI printer."
+"över när de har aktiverats."
 
 msgid ""
-"Pressure advance(Klipper) AKA Linear advance factor(Marlin). Useless for "
+"Pressure advance(Klipper) AKA Linear advance factor(Marlin)."
-"QIDI Printer"
 msgstr ""
-"Pressure advance(Klipper) AKA Linear advance factor(Marlin). Oanvändbar för "
+"Pressure advance(Klipper) AKA Linear advance factor(Marlin)."
-"QIDI printer"
 
 msgid "Filament notes"
 msgstr "Filament notes"

qdt/i18n/tr/QIDIStudio_tr.po

@@ -9564,17 +9564,15 @@ msgstr "Basınç Avansı (PA)"
 
 msgid ""
 "Enable pressure advance, auto calibration result will be overwriten once "
-"enabled. Useless for QIDI Printer"
+"enabled."
 msgstr ""
 "Basınç avansını etkinleştirin, otomatik kalibrasyon sonucu "
-"etkinleştirildikten sonra üzerine yazılacaktır. QIDI Yazıcı için kullanışsız"
+"etkinleştirildikten sonra üzerine yazılacaktır."
 
 msgid ""
-"Pressure advance(Klipper) AKA Linear advance factor(Marlin). Useless for QIDI "
+"Pressure advance(Klipper) AKA Linear advance factor(Marlin)."
-"Printer"
 msgstr ""
-"Basınç avansı (Klipper) AKA Doğrusal avans faktörü (Marlin). QIDI Yazıcı "
+"Basınç avansı (Klipper) AKA Doğrusal avans faktörü (Marlin)."
-"için işe yaramaz"
 
 msgid "Filament notes"
 msgstr "Filament Notları"

qdt/i18n/uk/QIDIStudio_uk.po

@@ -9653,18 +9653,15 @@ msgstr "Увімкнути випередження тиску PA"
 
 msgid ""
 "Enable pressure advance, auto calibration result will be overwriten once "
-"enabled. Useless for QIDI Printer"
+"enabled."
 msgstr ""
 "Увімкнути автоматичне вдавлювання, результат автоматичної калібрування буде "
-"перезаписаний після увімкнення. Невикористовується для принтерів QIDI "
+"перезаписаний після увімкнення."
-"Printer"
 
 msgid ""
-"Pressure advance(Klipper) AKA Linear advance factor(Marlin). Useless for "
+"Pressure advance(Klipper) AKA Linear advance factor(Marlin)."
-"QIDI Printer"
 msgstr ""
 "Підвищення тиску (Klipper) AKA Коефіцієнт лінійного просування (Marlin) "
-"Невикористовується для принтерів QIDI Printer"
 
 msgid "Filament notes"
 msgstr "Примітки щодо філаменту"

qdt/i18n/zh_cn/QIDIStudio_zh_CN.po

@@ -9103,15 +9103,13 @@ msgstr "启用压力提前补偿"
 
 msgid ""
 "Enable pressure advance, auto calibration result will be overwriten once "
-"enabled. Useless for QIDI Printer"
+"enabled."
-msgstr "启用压力提前补偿，启用后自动校准结果将被覆盖。对于QIDI打印机无效。"
+msgstr "启用压力提前补偿，启用后自动校准结果将被覆盖。"
 
 msgid ""
-"Pressure advance(Klipper) AKA Linear advance factor(Marlin). Useless for "
+"Pressure advance(Klipper) AKA Linear advance factor(Marlin)."
-"QIDI Printer"
 msgstr ""
-"压力提前补偿（Klipper）也称为线性提前补偿因子（Marlin）。对于QIDI打印机无"
+"压力提前补偿（Klipper）也称为线性提前补偿因子（Marlin）。"
-"效。"
 
 msgid "Filament notes"
 msgstr ""

resources/profiles/Q Series.json

@@ -802,6 +802,38 @@
         {
             "name": "QIDI PAHT-GF @Qidi Q1 Pro 0.8 nozzle",
             "sub_path": "filament/QIDI PAHT-GF @Qidi Q1 Pro 0.8 nozzle.json"
+        },
+        {
+            "name": "QIDI WOOD Rapido@Q-Series",
+            "sub_path": "filament/QIDI WOOD Rapido.json"
+        },
+        {
+            "name": "QIDI WOOD Rapido @Qidi Q1 Pro 0.4 nozzle",
+            "sub_path": "filament/QIDI WOOD Rapido @Qidi Q1 Pro 0.4 nozzle.json"
+        },
+        {
+            "name": "QIDI WOOD Rapido @Qidi Q1 Pro 0.6 nozzle",
+            "sub_path": "filament/QIDI WOOD Rapido @Qidi Q1 Pro 0.6 nozzle.json"
+        },
+        {
+            "name": "QIDI WOOD Rapido @Qidi Q1 Pro 0.8 nozzle",
+            "sub_path": "filament/QIDI WOOD Rapido @Qidi Q1 Pro 0.8 nozzle.json"
+        },
+        {
+            "name": "QIDI UltraPA-CF25@Q-Series",
+            "sub_path": "filament/QIDI UltraPA-CF25.json"
+        },
+        {
+            "name": "QIDI UltraPA-CF25 @Qidi Q1 Pro 0.4 nozzle",
+            "sub_path": "filament/QIDI UltraPA-CF25 @Qidi Q1 Pro 0.4 nozzle.json"
+        },
+        {
+            "name": "QIDI UltraPA-CF25 @Qidi Q1 Pro 0.6 nozzle",
+            "sub_path": "filament/QIDI UltraPA-CF25 @Qidi Q1 Pro 0.6 nozzle.json"
+        },
+        {
+            "name": "QIDI UltraPA-CF25 @Qidi Q1 Pro 0.8 nozzle",
+            "sub_path": "filament/QIDI UltraPA-CF25 @Qidi Q1 Pro 0.8 nozzle.json"
         }
     ],
     "machine_list": [

resources/profiles/Q Series/filament/Bambu PETG.json

@@ -23,7 +23,7 @@
     "nozzle_temperature": ["250"],
     "overhang_fan_speed": ["90"],
     "overhang_fan_threshold": ["10%"],
-    "pressure_advance": ["0.086"],
+    "pressure_advance": ["0.04"],
     "slow_down_layer_time": ["8"],
     "temperature_vitrification": ["70"],
     "textured_plate_temp_initial_layer" : ["80"],

resources/profiles/Q Series/filament/Generic PETG.json

@@ -24,7 +24,7 @@
     "nozzle_temperature": ["250"],
     "overhang_fan_speed": ["90"],
     "overhang_fan_threshold": ["10%"],
-    "pressure_advance": ["0.086"],
+    "pressure_advance": ["0.056"],
     "slow_down_layer_time": ["12"],
     "temperature_vitrification": ["70"],
     "textured_plate_temp_initial_layer" : ["80"],

resources/profiles/Q Series/filament/HATCHBOX PETG.json

@@ -23,7 +23,7 @@
     "nozzle_temperature": ["250"],
     "overhang_fan_speed": ["90"],
     "overhang_fan_threshold": ["10%"],
-    "pressure_advance": ["0.086"],
+    "pressure_advance": ["0.042"],
     "slow_down_layer_time": ["8"],
     "temperature_vitrification": ["70"],
     "textured_plate_temp_initial_layer" : ["80"],

resources/profiles/Q Series/filament/QIDI PETG Tough.json

@@ -22,7 +22,7 @@
     "nozzle_temperature": ["250"],
     "overhang_fan_speed": ["90"],
     "overhang_fan_threshold": ["10%"],
-    "pressure_advance": ["0.086"],
+    "pressure_advance": ["0.056"],
     "slow_down_layer_time": ["8"],
     "temperature_vitrification": ["70"],
     "textured_plate_temp_initial_layer" : ["80"],

resources/profiles/Q Series/filament/QIDI UltraPA-CF25 @Qidi Q1 Pro 0.4 nozzle.json

@@ -0,0 +1,10 @@
+{
+    "type": "filament",
+    "filament_id": "GFB99",
+    "setting_id": "GFSA04",
+    "instantiation": "true",
+    "filament_settings_id": ["QIDI UltraPA-CF25 @Qidi Q1 Pro 0.4 nozzle"],
+    "inherits": "QIDI UltraPA-CF25@Q-Series",
+    "name": "QIDI UltraPA-CF25 @Qidi Q1 Pro 0.4 nozzle",
+    "compatible_printers": ["Q1 Pro 0.4 nozzle"]
+}

resources/profiles/Q Series/filament/QIDI UltraPA-CF25 @Qidi Q1 Pro 0.6 nozzle.json

@@ -0,0 +1,11 @@
+{
+    "type": "filament",
+    "filament_id": "GFB99",
+    "setting_id": "GFSA04",
+    "instantiation": "true",
+    "filament_settings_id": ["QIDI UltraPA-CF25 @Qidi Q1 Pro 0.6 nozzle"],
+    "inherits": "QIDI UltraPA-CF25@Q-Series",
+    "name": "QIDI UltraPA-CF25 @Qidi Q1 Pro 0.6 nozzle",
+    "pressure_advance": ["0.022"],
+    "compatible_printers": ["Q1 Pro 0.6 nozzle"]
+}

resources/profiles/Q Series/filament/QIDI UltraPA-CF25 @Qidi Q1 Pro 0.8 nozzle.json

@@ -0,0 +1,11 @@
+{
+    "type": "filament",
+    "filament_id": "GFB99",
+    "setting_id": "GFSA04",
+    "instantiation": "true",
+    "filament_settings_id": ["QIDI UltraPA-CF25 @Qidi Q1 Pro 0.8 nozzle"],
+    "inherits": "QIDI UltraPA-CF25@Q-Series",
+    "name": "QIDI UltraPA-CF25 @Qidi Q1 Pro 0.8 nozzle",
+    "pressure_advance": ["0.02"],
+    "compatible_printers": ["Q1 Pro 0.8 nozzle"]
+}

resources/profiles/Q Series/filament/QIDI UltraPA-CF25.json

@@ -0,0 +1,32 @@
+{
+    "type": "filament",
+    "filament_id": "GFN98",
+    "setting_id": "GFSN99",
+    "name": "QIDI UltraPA-CF25@Q-Series",
+    "from": "system",
+    "instantiation": "false",
+    "inherits": "fdm_filament_common",
+    "additional_cooling_fan_speed_unseal": ["0"],
+    "additional_cooling_fan_speed": ["0"],
+    "close_fan_the_first_x_layers": ["3"],
+    "enable_overhang_bridge_fan": ["1"],
+    "fan_cooling_layer_time": ["5"],
+    "fan_max_speed": ["40"],
+    "fan_min_speed": ["20"],
+    "filament_density": ["1.23"],
+    "filament_flow_ratio": ["0.94"],
+    "filament_max_volumetric_speed": ["8"],
+    "filament_type": ["UltraPA-CF25"],
+    "nozzle_temperature_initial_layer": ["300"],
+    "nozzle_temperature_range_high": ["320"],
+    "nozzle_temperature_range_low": ["300"],
+    "nozzle_temperature": ["300"],
+    "overhang_fan_speed": ["40"],
+    "overhang_fan_threshold": ["0%"],
+    "pressure_advance": ["0.026"],
+    "slow_down_layer_time": ["2"],
+    "temperature_vitrification": ["230"],
+    "textured_plate_temp_initial_layer" : ["80"],
+    "textured_plate_temp" : ["80"],
+    "compatible_printers": []
+}

resources/profiles/Q Series/filament/QIDI WOOD Rapido @Qidi Q1 Pro 0.4 nozzle.json

@@ -0,0 +1,10 @@
+{
+    "type": "filament",
+    "filament_id": "GFB99",
+    "setting_id": "GFSA04",
+    "instantiation": "true",
+    "filament_settings_id": ["QIDI WOOD Rapido @Qidi Q1 Pro 0.4 nozzle"],
+    "inherits": "QIDI WOOD Rapido@Q-Series",
+    "name": "QIDI WOOD Rapido @Qidi Q1 Pro 0.4 nozzle",
+    "compatible_printers": ["Q1 Pro 0.4 nozzle"]
+}

resources/profiles/Q Series/filament/QIDI WOOD Rapido @Qidi Q1 Pro 0.6 nozzle.json

@@ -0,0 +1,11 @@
+{
+    "type": "filament",
+    "filament_id": "GFB99",
+    "setting_id": "GFSA04",
+    "instantiation": "true",
+    "filament_settings_id": ["QIDI WOOD Rapido @Qidi Q1 Pro 0.6 nozzle"],
+    "inherits": "QIDI WOOD Rapido@Q-Series",
+    "name": "QIDI WOOD Rapido @Qidi Q1 Pro 0.6 nozzle",
+    "pressure_advance": ["0.02"],
+    "compatible_printers": ["Q1 Pro 0.6 nozzle"]
+}

resources/profiles/Q Series/filament/QIDI WOOD Rapido @Qidi Q1 Pro 0.8 nozzle.json

@@ -0,0 +1,11 @@
+{
+    "type": "filament",
+    "filament_id": "GFB99",
+    "setting_id": "GFSA04",
+    "instantiation": "true",
+    "filament_settings_id": ["QIDI WOOD Rapido @Qidi Q1 Pro 0.8 nozzle"],
+    "inherits": "QIDI WOOD Rapido@Q-Series",
+    "name": "QIDI WOOD Rapido @Qidi Q1 Pro 0.8 nozzle",
+    "pressure_advance": ["0.012"],
+    "compatible_printers": ["Q1 Pro 0.8 nozzle"]
+}

resources/profiles/Q Series/filament/QIDI WOOD Rapido.json

@@ -0,0 +1,19 @@
+{
+    "type": "filament",
+	"filament_id": "GFL99",
+    "setting_id": "GFSL99",
+    "name": "QIDI WOOD Rapido@Q-Series",
+    "from": "system",
+    "instantiation": "false",
+    "inherits": "fdm_filament_common",
+    "additional_cooling_fan_speed": ["100"],
+    "filament_density": ["1.23"],
+    "filament_flow_ratio": ["0.95"],
+    "filament_max_volumetric_speed": ["18"],
+    "filament_type": ["PLA"],
+    "nozzle_temperature_range_high": ["220"],
+    "nozzle_temperature_range_low": ["190"],
+    "pressure_advance": ["0.04"],
+    "temperature_vitrification": ["45"],
+	"compatible_printers": []
+}

resources/profiles/X 3 Series.json

@@ -1944,6 +1944,86 @@
         {
             "name": "QIDI PAHT-GF @Qidi X-Smart 3 0.8 nozzle",
             "sub_path": "filament/QIDI PAHT-GF @Qidi X-Smart 3 0.8 nozzle.json"
+        },
+        {
+            "name": "QIDI UltraPA-CF25@X3",
+            "sub_path": "filament/QIDI UltraPA-CF25.json"
+        },
+        {
+            "name": "QIDI UltraPA-CF25 @Qidi X-Max 3 0.4 nozzle",
+            "sub_path": "filament/QIDI UltraPA-CF25 @Qidi X-Max 3 0.4 nozzle.json"
+        },
+        {
+            "name": "QIDI UltraPA-CF25 @Qidi X-Plus 3 0.4 nozzle",
+            "sub_path": "filament/QIDI UltraPA-CF25 @Qidi X-Plus 3 0.4 nozzle.json"
+        },
+        {
+            "name": "QIDI UltraPA-CF25 @Qidi X-Smart 3 0.4 nozzle",
+            "sub_path": "filament/QIDI UltraPA-CF25 @Qidi X-Smart 3 0.4 nozzle.json"
+        },
+        {
+            "name": "QIDI UltraPA-CF25 @Qidi X-Max 3 0.6 nozzle",
+            "sub_path": "filament/QIDI UltraPA-CF25 @Qidi X-Max 3 0.6 nozzle.json"
+        },
+        {
+            "name": "QIDI UltraPA-CF25 @Qidi X-Plus 3 0.6 nozzle",
+            "sub_path": "filament/QIDI UltraPA-CF25 @Qidi X-Plus 3 0.6 nozzle.json"
+        },
+        {
+            "name": "QIDI UltraPA-CF25 @Qidi X-Smart 3 0.6 nozzle",
+            "sub_path": "filament/QIDI UltraPA-CF25 @Qidi X-Smart 3 0.6 nozzle.json"
+        },
+        {
+            "name": "QIDI UltraPA-CF25 @Qidi X-Max 3 0.8 nozzle",
+            "sub_path": "filament/QIDI UltraPA-CF25 @Qidi X-Max 3 0.8 nozzle.json"
+        },
+        {
+            "name": "QIDI UltraPA-CF25 @Qidi X-Plus 3 0.8 nozzle",
+            "sub_path": "filament/QIDI UltraPA-CF25 @Qidi X-Plus 3 0.8 nozzle.json"
+        },
+        {
+            "name": "QIDI UltraPA-CF25 @Qidi X-Smart 3 0.8 nozzle",
+            "sub_path": "filament/QIDI UltraPA-CF25 @Qidi X-Smart 3 0.8 nozzle.json"
+        },
+        {
+            "name": "QIDI WOOD Rapido@X3",
+            "sub_path": "filament/QIDI WOOD Rapido.json"
+        },
+        {
+            "name": "QIDI WOOD Rapido @Qidi X-Max 3 0.4 nozzle",
+            "sub_path": "filament/QIDI WOOD Rapido @Qidi X-Max 3 0.4 nozzle.json"
+        },
+        {
+            "name": "QIDI WOOD Rapido @Qidi X-Plus 3 0.4 nozzle",
+            "sub_path": "filament/QIDI WOOD Rapido @Qidi X-Plus 3 0.4 nozzle.json"
+        },
+        {
+            "name": "QIDI WOOD Rapido @Qidi X-Smart 3 0.4 nozzle",
+            "sub_path": "filament/QIDI WOOD Rapido @Qidi X-Smart 3 0.4 nozzle.json"
+        },
+        {
+            "name": "QIDI WOOD Rapido @Qidi X-Max 3 0.6 nozzle",
+            "sub_path": "filament/QIDI WOOD Rapido @Qidi X-Max 3 0.6 nozzle.json"
+        },
+        {
+            "name": "QIDI WOOD Rapido @Qidi X-Plus 3 0.6 nozzle",
+            "sub_path": "filament/QIDI WOOD Rapido @Qidi X-Plus 3 0.6 nozzle.json"
+        },
+        {
+            "name": "QIDI WOOD Rapido @Qidi X-Smart 3 0.6 nozzle",
+            "sub_path": "filament/QIDI WOOD Rapido @Qidi X-Smart 3 0.6 nozzle.json"
+        },
+        {
+            "name": "QIDI WOOD Rapido @Qidi X-Max 3 0.8 nozzle",
+            "sub_path": "filament/QIDI WOOD Rapido @Qidi X-Max 3 0.8 nozzle.json"
+        },
+        {
+            "name": "QIDI WOOD Rapido @Qidi X-Plus 3 0.8 nozzle",
+            "sub_path": "filament/QIDI WOOD Rapido @Qidi X-Plus 3 0.8 nozzle.json"
+        },
+        {
+            "name": "QIDI WOOD Rapido @Qidi X-Smart 3 0.8 nozzle",
+            "sub_path": "filament/QIDI WOOD Rapido @Qidi X-Smart 3 0.8 nozzle.json"
         }
     ],
     "machine_list": [

resources/profiles/X 3 Series/filament/QIDI UltraPA-CF25 @Qidi X-Max 3 0.4 nozzle.json

@@ -0,0 +1,10 @@
+{
+    "type": "filament",
+    "filament_id": "GFN98",
+    "setting_id": "GFSN99",
+    "name": "QIDI UltraPA-CF25 @Qidi X-Max 3 0.4 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "QIDI UltraPA-CF25@X3",
+	"compatible_printers": ["X-Max 3 0.4 nozzle"]
+}

resources/profiles/X 3 Series/filament/QIDI UltraPA-CF25 @Qidi X-Max 3 0.6 nozzle.json

@@ -0,0 +1,10 @@
+{
+    "type": "filament",
+    "filament_id": "GFN98",
+    "setting_id": "GFSN99",
+    "name": "QIDI UltraPA-CF25 @Qidi X-Max 3 0.6 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "QIDI UltraPA-CF25@X3",
+	"compatible_printers": ["X-Max 3 0.6 nozzle"]
+}

resources/profiles/X 3 Series/filament/QIDI UltraPA-CF25 @Qidi X-Max 3 0.8 nozzle.json

@@ -0,0 +1,10 @@
+{
+    "type": "filament",
+    "filament_id": "GFN98",
+    "setting_id": "GFSN99",
+    "name": "QIDI UltraPA-CF25 @Qidi X-Max 3 0.8 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "QIDI UltraPA-CF25@X3",
+	"compatible_printers": ["X-Max 3 0.8 nozzle"]
+}

resources/profiles/X 3 Series/filament/QIDI UltraPA-CF25 @Qidi X-Plus 3 0.4 nozzle.json

@@ -0,0 +1,10 @@
+{
+    "type": "filament",
+    "filament_id": "GFN98",
+    "setting_id": "GFSN99",
+    "name": "QIDI UltraPA-CF25 @Qidi X-Plus 3 0.4 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "QIDI UltraPA-CF25@X3",
+	"compatible_printers": ["X-Plus 3 0.4 nozzle"]
+}

resources/profiles/X 3 Series/filament/QIDI UltraPA-CF25 @Qidi X-Plus 3 0.6 nozzle.json

@@ -0,0 +1,10 @@
+{
+    "type": "filament",
+    "filament_id": "GFN98",
+    "setting_id": "GFSN99",
+    "name": "QIDI UltraPA-CF25 @Qidi X-Plus 3 0.6 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "QIDI UltraPA-CF25@X3",
+	"compatible_printers": ["X-Plus 3 0.6 nozzle"]
+}

resources/profiles/X 3 Series/filament/QIDI UltraPA-CF25 @Qidi X-Plus 3 0.8 nozzle.json

@@ -0,0 +1,10 @@
+{
+    "type": "filament",
+    "filament_id": "GFN98",
+    "setting_id": "GFSN99",
+    "name": "QIDI UltraPA-CF25 @Qidi X-Plus 3 0.8 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "QIDI UltraPA-CF25@X3",
+	"compatible_printers": ["X-Plus 3 0.8 nozzle"]
+}

resources/profiles/X 3 Series/filament/QIDI UltraPA-CF25 @Qidi X-Smart 3 0.4 nozzle.json

@@ -0,0 +1,12 @@
+{
+    "type": "filament",
+    "filament_id": "GFN98",
+    "setting_id": "GFSN99",
+    "name": "QIDI UltraPA-CF25 @Qidi X-Smart 3 0.4 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "QIDI UltraPA-CF25@X3",
+    "additional_cooling_fan_speed": ["0"],
+    "additional_cooling_fan_speed_unseal": ["0"],
+	"compatible_printers": ["X-Smart 3 0.4 nozzle"]
+}

resources/profiles/X 3 Series/filament/QIDI UltraPA-CF25 @Qidi X-Smart 3 0.6 nozzle.json

@@ -0,0 +1,12 @@
+{
+    "type": "filament",
+    "filament_id": "GFN98",
+    "setting_id": "GFSN99",
+    "name": "QIDI UltraPA-CF25 @Qidi X-Smart 3 0.6 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "QIDI UltraPA-CF25@X3",
+    "additional_cooling_fan_speed": ["0"],
+    "additional_cooling_fan_speed_unseal": ["0"],
+	"compatible_printers": ["X-Smart 3 0.6 nozzle"]
+}

resources/profiles/X 3 Series/filament/QIDI UltraPA-CF25 @Qidi X-Smart 3 0.8 nozzle.json

@@ -0,0 +1,12 @@
+{
+    "type": "filament",
+    "filament_id": "GFN98",
+    "setting_id": "GFSN99",
+    "name": "QIDI UltraPA-CF25 @Qidi X-Smart 3 0.8 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "QIDI UltraPA-CF25@X3",
+    "additional_cooling_fan_speed": ["0"],
+    "additional_cooling_fan_speed_unseal": ["0"],
+	"compatible_printers": ["X-Smart 3 0.8 nozzle"]
+}

resources/profiles/X 3 Series/filament/QIDI UltraPA-CF25.json

@@ -0,0 +1,32 @@
+{
+    "type": "filament",
+    "filament_id": "GFN98",
+    "setting_id": "GFSN99",
+    "name": "QIDI UltraPA-CF25@X3",
+    "from": "system",
+    "instantiation": "false",
+    "inherits": "fdm_filament_common",
+    "additional_cooling_fan_speed_unseal": ["0"],
+    "additional_cooling_fan_speed": ["0"],
+    "close_fan_the_first_x_layers": ["3"],
+    "enable_overhang_bridge_fan": ["1"],
+    "fan_cooling_layer_time": ["5"],
+    "fan_max_speed": ["40"],
+    "fan_min_speed": ["20"],
+    "filament_density": ["1.23"],
+    "filament_flow_ratio": ["0.94"],
+    "filament_max_volumetric_speed": ["8"],
+    "filament_type": ["UltraPA-CF25"],
+    "nozzle_temperature_initial_layer": ["300"],
+    "nozzle_temperature_range_high": ["320"],
+    "nozzle_temperature_range_low": ["300"],
+    "nozzle_temperature": ["300"],
+    "overhang_fan_speed": ["40"],
+    "overhang_fan_threshold": ["0%"],
+    "pressure_advance": ["0.015"],
+    "slow_down_layer_time": ["2"],
+    "temperature_vitrification": ["230"],
+    "textured_plate_temp_initial_layer" : ["80"],
+    "textured_plate_temp" : ["80"],
+    "compatible_printers": []
+}

resources/profiles/X 3 Series/filament/QIDI WOOD Rapido @Qidi X-Max 3 0.4 nozzle.json

@@ -0,0 +1,10 @@
+{
+    "type": "filament",
+	"filament_id": "GFL99",
+    "setting_id": "GFSL99",
+    "name": "QIDI WOOD Rapido @Qidi X-Max 3 0.4 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "QIDI WOOD Rapido@X3",
+	"compatible_printers": ["X-Max 3 0.4 nozzle"]
+}

resources/profiles/X 3 Series/filament/QIDI WOOD Rapido @Qidi X-Max 3 0.6 nozzle.json

@@ -0,0 +1,11 @@
+{
+    "type": "filament",
+	"filament_id": "GFL99",
+    "setting_id": "GFSL99",
+    "name": "QIDI WOOD Rapido @Qidi X-Max 3 0.6 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "QIDI WOOD Rapido@X3",
+    "pressure_advance": ["0.02"],
+	"compatible_printers": ["X-Max 3 0.6 nozzle"]
+}

resources/profiles/X 3 Series/filament/QIDI WOOD Rapido @Qidi X-Max 3 0.8 nozzle.json

@@ -0,0 +1,11 @@
+{
+    "type": "filament",
+	"filament_id": "GFL99",
+    "setting_id": "GFSL99",
+    "name": "QIDI WOOD Rapido @Qidi X-Max 3 0.8 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "QIDI WOOD Rapido@X3",
+    "pressure_advance": ["0.01"],
+	"compatible_printers": ["X-Max 3 0.8 nozzle"]
+}

resources/profiles/X 3 Series/filament/QIDI WOOD Rapido @Qidi X-Plus 3 0.4 nozzle.json

@@ -0,0 +1,10 @@
+{
+    "type": "filament",
+	"filament_id": "GFL99",
+    "setting_id": "GFSL99",
+    "name": "QIDI WOOD Rapido @Qidi X-Plus 3 0.4 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "QIDI WOOD Rapido@X3",
+	"compatible_printers": ["X-Plus 3 0.4 nozzle"]
+}

resources/profiles/X 3 Series/filament/QIDI WOOD Rapido @Qidi X-Plus 3 0.6 nozzle.json

@@ -0,0 +1,11 @@
+{
+    "type": "filament",
+	"filament_id": "GFL99",
+    "setting_id": "GFSL99",
+    "name": "QIDI WOOD Rapido @Qidi X-Plus 3 0.6 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "QIDI WOOD Rapido@X3",
+    "pressure_advance": ["0.02"],
+	"compatible_printers": ["X-Plus 3 0.6 nozzle"]
+}

resources/profiles/X 3 Series/filament/QIDI WOOD Rapido @Qidi X-Plus 3 0.8 nozzle.json

@@ -0,0 +1,11 @@
+{
+    "type": "filament",
+	"filament_id": "GFL99",
+    "setting_id": "GFSL99",
+    "name": "QIDI WOOD Rapido @Qidi X-Plus 3 0.8 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "QIDI WOOD Rapido@X3",
+    "pressure_advance": ["0.01"],
+	"compatible_printers": ["X-Plus 3 0.8 nozzle"]
+}

resources/profiles/X 3 Series/filament/QIDI WOOD Rapido @Qidi X-Smart 3 0.4 nozzle.json

@@ -0,0 +1,14 @@
+{
+    "type": "filament",
+	"filament_id": "GFL99",
+    "setting_id": "GFSL99",
+    "name": "QIDI WOOD Rapido @Qidi X-Smart 3 0.4 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "QIDI WOOD Rapido@X3",
+    "additional_cooling_fan_speed_unseal": ["0"],
+    "additional_cooling_fan_speed": ["0"],
+    "filament_max_volumetric_speed": ["20"],
+    "slow_down_layer_time": ["8"],
+	"compatible_printers": ["X-Smart 3 0.4 nozzle"]
+}

resources/profiles/X 3 Series/filament/QIDI WOOD Rapido @Qidi X-Smart 3 0.6 nozzle.json

@@ -0,0 +1,14 @@
+{
+    "type": "filament",
+	"filament_id": "GFL99",
+    "setting_id": "GFSL99",
+    "name": "QIDI WOOD Rapido @Qidi X-Smart 3 0.6 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "QIDI WOOD Rapido@X3",
+    "additional_cooling_fan_speed_unseal": ["0"],
+    "additional_cooling_fan_speed": ["0"],
+    "pressure_advance": ["0.02"],
+    "slow_down_layer_time": ["8"],
+	"compatible_printers": ["X-Smart 3 0.6 nozzle"]
+}

resources/profiles/X 3 Series/filament/QIDI WOOD Rapido @Qidi X-Smart 3 0.8 nozzle.json

@@ -0,0 +1,14 @@
+{
+    "type": "filament",
+	"filament_id": "GFL99",
+    "setting_id": "GFSL99",
+    "name": "QIDI WOOD Rapido @Qidi X-Smart 3 0.8 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "QIDI WOOD Rapido@X3",
+    "additional_cooling_fan_speed_unseal": ["0"],
+    "additional_cooling_fan_speed": ["0"],
+    "pressure_advance": ["0.01"],
+    "slow_down_layer_time": ["8"],
+	"compatible_printers": ["X-Smart 3 0.8 nozzle"]
+}

resources/profiles/X 3 Series/filament/QIDI WOOD Rapido.json

@@ -0,0 +1,19 @@
+{
+    "type": "filament",
+	"filament_id": "GFL99",
+    "setting_id": "GFSL99",
+    "name": "QIDI WOOD Rapido@X3",
+    "from": "system",
+    "instantiation": "false",
+    "inherits": "fdm_filament_common",
+    "additional_cooling_fan_speed": ["100"],
+    "filament_density": ["1.23"],
+    "filament_flow_ratio": ["0.95"],
+    "filament_max_volumetric_speed": ["16"],
+    "filament_type": ["PLA"],
+    "nozzle_temperature_range_high": ["220"],
+    "nozzle_temperature_range_low": ["190"],
+    "pressure_advance": ["0.03"],
+    "temperature_vitrification": ["45"],
+	"compatible_printers": []
+}

resources/profiles/X 4 Series.json

@@ -799,6 +799,38 @@
         {
             "name": "QIDI PET-GF @Qidi X-Plus 4 0.8 nozzle",
             "sub_path": "filament/QIDI PET-GF @Qidi X-Plus 4 0.8 nozzle.json"
+        },
+        {
+            "name": "QIDI UltraPA-CF25@X4",
+            "sub_path": "filament/QIDI UltraPA-CF25.json"
+        },
+        {
+            "name": "QIDI UltraPA-CF25 @Qidi X-Plus 4 0.4 nozzle",
+            "sub_path": "filament/QIDI UltraPA-CF25 @Qidi X-Plus 4 0.4 nozzle.json"
+        },
+        {
+            "name": "QIDI UltraPA-CF25 @Qidi X-Plus 4 0.6 nozzle",
+            "sub_path": "filament/QIDI UltraPA-CF25 @Qidi X-Plus 4 0.6 nozzle.json"
+        },
+        {
+            "name": "QIDI UltraPA-CF25 @Qidi X-Plus 4 0.8 nozzle",
+            "sub_path": "filament/QIDI UltraPA-CF25 @Qidi X-Plus 4 0.8 nozzle.json"
+        },
+        {
+            "name": "QIDI WOOD Rapido@X4",
+            "sub_path": "filament/QIDI WOOD Rapido.json"
+        },
+        {
+            "name": "QIDI WOOD Rapido @Qidi X-Plus 4 0.4 nozzle",
+            "sub_path": "filament/QIDI WOOD Rapido @Qidi X-Plus 4 0.4 nozzle.json"
+        },
+        {
+            "name": "QIDI WOOD Rapido @Qidi X-Plus 4 0.6 nozzle",
+            "sub_path": "filament/QIDI WOOD Rapido @Qidi X-Plus 4 0.6 nozzle.json"
+        },
+        {
+            "name": "QIDI WOOD Rapido @Qidi X-Plus 4 0.8 nozzle",
+            "sub_path": "filament/QIDI WOOD Rapido @Qidi X-Plus 4 0.8 nozzle.json"
         }
     ],
     "machine_list": [

resources/profiles/X 4 Series/filament/Bambu PETG.json

@@ -21,8 +21,10 @@
     "nozzle_temperature": ["250"],
     "overhang_fan_speed": ["90"],
     "overhang_fan_threshold": ["10%"],
-    "pressure_advance": ["0.086"],
+    "pressure_advance": ["0.056"],
     "slow_down_layer_time": ["8"],
+    "supertack_plate_temp_initial_layer": ["70"],
+    "supertack_plate_temp": ["70"],
     "temperature_vitrification": ["70"],
     "textured_plate_temp_initial_layer" : ["80"],
     "textured_plate_temp" : ["80"],

resources/profiles/X 4 Series/filament/Bambu PLA.json

@@ -13,6 +13,8 @@
     "nozzle_temperature_range_low": ["190"],
     "nozzle_temperature_initial_layer": ["210"],
     "nozzle_temperature": ["210"],
+    "supertack_plate_temp_initial_layer": ["45"],
+    "supertack_plate_temp": ["45"],
     "temperature_vitrification": ["45"],
 	"compatible_printers": []
 }

resources/profiles/X 4 Series/filament/Generic PETG.json

@@ -22,8 +22,10 @@
     "nozzle_temperature": ["250"],
     "overhang_fan_speed": ["90"],
     "overhang_fan_threshold": ["10%"],
-    "pressure_advance": ["0.086"],
+    "pressure_advance": ["0.056"],
     "slow_down_layer_time": ["12"],
+    "supertack_plate_temp_initial_layer": ["70"],
+    "supertack_plate_temp": ["70"],
     "temperature_vitrification": ["70"],
     "textured_plate_temp_initial_layer" : ["80"],
     "textured_plate_temp" : ["80"],

resources/profiles/X 4 Series/filament/Generic PLA Silk.json

@@ -17,6 +17,8 @@
     "nozzle_temperature_range_low": ["190"],
     "nozzle_temperature": ["220"],
     "pressure_advance": ["0.032"],
+    "supertack_plate_temp_initial_layer": ["35"],
+    "supertack_plate_temp": ["35"],
     "temperature_vitrification": ["45"],
     "textured_plate_temp_initial_layer" : ["55"],
     "textured_plate_temp" : ["55"],

resources/profiles/X 4 Series/filament/Generic PLA+.json

@@ -15,6 +15,8 @@
     "nozzle_temperature_range_high": ["240"],
     "nozzle_temperature_range_low": ["190"],
     "nozzle_temperature": ["230"],
+    "supertack_plate_temp_initial_layer": ["45"],
+    "supertack_plate_temp": ["45"],
     "temperature_vitrification": ["45"],
     "compatible_printers": []
 }

resources/profiles/X 4 Series/filament/Generic PLA.json

@@ -15,6 +15,8 @@
     "nozzle_temperature_range_high": ["240"],
     "nozzle_temperature_range_low": ["190"],
     "nozzle_temperature": ["220"],
+    "supertack_plate_temp_initial_layer": ["45"],
+    "supertack_plate_temp": ["45"],
     "temperature_vitrification": ["45"],
     "compatible_printers": []
 }

resources/profiles/X 4 Series/filament/HATCHBOX PETG.json

@@ -21,8 +21,10 @@
     "nozzle_temperature": ["250"],
     "overhang_fan_speed": ["90"],
     "overhang_fan_threshold": ["10%"],
-    "pressure_advance": ["0.086"],
+    "pressure_advance": ["0.056"],
     "slow_down_layer_time": ["8"],
+    "supertack_plate_temp_initial_layer": ["70"],
+    "supertack_plate_temp": ["70"],
     "temperature_vitrification": ["70"],
     "textured_plate_temp_initial_layer" : ["80"],
     "textured_plate_temp" : ["80"],

resources/profiles/X 4 Series/filament/HATCHBOX PLA.json

@@ -13,6 +13,8 @@
     "nozzle_temperature_range_low": ["190"],
     "nozzle_temperature_initial_layer": ["210"],
     "nozzle_temperature": ["210"],
+    "supertack_plate_temp_initial_layer": ["45"],
+    "supertack_plate_temp": ["45"],
     "temperature_vitrification": ["45"],
 	"compatible_printers": []
 }

resources/profiles/X 4 Series/filament/Overture PLA.json

@@ -17,6 +17,8 @@
     "nozzle_temperature_initial_layer": ["210"],
     "nozzle_temperature": ["210"],
     "slow_down_layer_time": ["10"],
+    "supertack_plate_temp_initial_layer": ["45"],
+    "supertack_plate_temp": ["45"],
     "temperature_vitrification": ["45"],
 	"compatible_printers": []
 }

resources/profiles/X 4 Series/filament/PolyLite PLA.json

@@ -18,6 +18,8 @@
     "nozzle_temperature_initial_layer": ["210"],
     "nozzle_temperature": ["210"],
     "slow_down_layer_time": ["10"],
+    "supertack_plate_temp_initial_layer": ["45"],
+    "supertack_plate_temp": ["45"],
     "temperature_vitrification": ["45"],
 	"compatible_printers": []
 }

resources/profiles/X 4 Series/filament/QIDI PET-CF.json

@@ -26,5 +26,7 @@
     "temperature_vitrification": ["185"],
     "textured_plate_temp_initial_layer" : ["80"],
     "textured_plate_temp" : ["80"],
+    "supertack_plate_temp_initial_layer": ["80"],
+    "supertack_plate_temp": ["80"],
     "compatible_printers": []
 }

resources/profiles/X 4 Series/filament/QIDI PETG Tough @Qidi X-Plus 4 0.4 nozzle.json

@@ -6,6 +6,5 @@
     "from": "system",
     "instantiation": "true",
     "inherits": "QIDI PETG Tough@X4",
-    "pressure_advance": ["0.056"],
 	"compatible_printers": ["X-Plus 4 0.4 nozzle"]
 }

resources/profiles/X 4 Series/filament/QIDI PETG Tough.json

@@ -20,10 +20,12 @@
     "nozzle_temperature": ["250"],
     "overhang_fan_speed": ["90"],
     "overhang_fan_threshold": ["10%"],
-    "pressure_advance": ["0.086"],
+    "pressure_advance": ["0.056"],
     "slow_down_layer_time": ["8"],
     "temperature_vitrification": ["70"],
     "textured_plate_temp_initial_layer" : ["80"],
     "textured_plate_temp" : ["80"],
+    "supertack_plate_temp_initial_layer": ["70"],
+    "supertack_plate_temp": ["70"],
 	"compatible_printers": []
 }

resources/profiles/X 4 Series/filament/QIDI PLA Rapido Matte.json

@@ -13,6 +13,8 @@
     "nozzle_temperature_range_low": ["190"],
     "nozzle_temperature_initial_layer": ["210"],
     "nozzle_temperature": ["210"],
+    "supertack_plate_temp_initial_layer": ["45"],
+    "supertack_plate_temp": ["45"],
     "temperature_vitrification": ["45"],
 	"compatible_printers": []
 }

resources/profiles/X 4 Series/filament/QIDI PLA Rapido Metal.json

@@ -13,6 +13,8 @@
     "nozzle_temperature_range_low": ["190"],
     "nozzle_temperature_initial_layer": ["210"],
     "nozzle_temperature": ["210"],
+    "supertack_plate_temp_initial_layer": ["45"],
+    "supertack_plate_temp": ["45"],
     "temperature_vitrification": ["45"],
 	"compatible_printers": []
 }

resources/profiles/X 4 Series/filament/QIDI PLA Rapido Silk.json

@@ -14,6 +14,8 @@
     "nozzle_temperature_range_low": ["190"],
     "nozzle_temperature_initial_layer": ["220"],
     "nozzle_temperature": ["220"],
+    "supertack_plate_temp_initial_layer": ["0"],
+    "supertack_plate_temp": ["0"],
     "textured_plate_temp_initial_layer" : ["55"],
     "textured_plate_temp" : ["55"],
     "temperature_vitrification": ["45"],

resources/profiles/X 4 Series/filament/QIDI PLA Rapido.json

@@ -12,6 +12,8 @@
     "nozzle_temperature_range_low": ["190"],
     "nozzle_temperature_initial_layer": ["210"],
     "nozzle_temperature": ["210"],
+    "supertack_plate_temp_initial_layer": ["45"],
+    "supertack_plate_temp": ["45"],
     "temperature_vitrification": ["45"],
 	"compatible_printers": []
 }

resources/profiles/X 4 Series/filament/QIDI PLA-CF.json

@@ -19,6 +19,8 @@
     "overhang_fan_speed": ["100"],
     "overhang_fan_threshold": ["50%"],
 	"pressure_advance": ["0.042"],
+	"supertack_plate_temp_initial_layer": ["50"],
+    "supertack_plate_temp": ["50"],
 	"temperature_vitrification": ["45"],
 	"compatible_printers": []
 }

resources/profiles/X 4 Series/filament/QIDI UltraPA-CF25 @Qidi X-Plus 4 0.4 nozzle.json

@@ -0,0 +1,10 @@
+{
+    "type": "filament",
+    "filament_id": "GFN98",
+    "setting_id": "GFSN99",
+    "name": "QIDI UltraPA-CF25 @Qidi X-Plus 4 0.4 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "QIDI UltraPA-CF25@X4",
+	"compatible_printers": ["X-Plus 4 0.4 nozzle"]
+}

resources/profiles/X 4 Series/filament/QIDI UltraPA-CF25 @Qidi X-Plus 4 0.6 nozzle.json

@@ -0,0 +1,11 @@
+{
+    "type": "filament",
+    "filament_id": "GFN98",
+    "setting_id": "GFSN99",
+    "name": "QIDI UltraPA-CF25 @Qidi X-Plus 4 0.6 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "QIDI UltraPA-CF25@X4",
+    "pressure_advance": ["0.022"],
+	"compatible_printers": ["X-Plus 4 0.6 nozzle"]
+}

resources/profiles/X 4 Series/filament/QIDI UltraPA-CF25 @Qidi X-Plus 4 0.8 nozzle.json

@@ -0,0 +1,11 @@
+{
+    "type": "filament",
+    "filament_id": "GFN98",
+    "setting_id": "GFSN99",
+    "name": "QIDI UltraPA-CF25 @Qidi X-Plus 4 0.8 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "QIDI UltraPA-CF25@X4",
+    "pressure_advance": ["0.02"],
+	"compatible_printers": ["X-Plus 4 0.8 nozzle"]
+}

resources/profiles/X 4 Series/filament/QIDI UltraPA-CF25.json

@@ -0,0 +1,30 @@
+{
+    "type": "filament",
+    "filament_id": "GFN98",
+    "setting_id": "GFSN99",
+    "name": "QIDI UltraPA-CF25@X4",
+    "from": "system",
+    "instantiation": "false",
+    "inherits": "fdm_filament_common",
+    "close_fan_the_first_x_layers": ["3"],
+    "enable_overhang_bridge_fan": ["1"],
+    "fan_cooling_layer_time": ["5"],
+    "fan_max_speed": ["40"],
+    "fan_min_speed": ["20"],
+    "filament_density": ["1.23"],
+    "filament_flow_ratio": ["0.94"],
+    "filament_max_volumetric_speed": ["8"],
+    "filament_type": ["UltraPA-CF25"],
+    "nozzle_temperature_initial_layer": ["300"],
+    "nozzle_temperature_range_high": ["320"],
+    "nozzle_temperature_range_low": ["300"],
+    "nozzle_temperature": ["300"],
+    "overhang_fan_speed": ["40"],
+    "overhang_fan_threshold": ["0%"],
+    "pressure_advance": ["0.026"],
+    "slow_down_layer_time": ["2"],
+    "temperature_vitrification": ["230"],
+    "textured_plate_temp_initial_layer" : ["80"],
+    "textured_plate_temp" : ["80"],
+    "compatible_printers": []
+}

resources/profiles/X 4 Series/filament/QIDI WOOD Rapido @Qidi X-Plus 4 0.4 nozzle.json

@@ -0,0 +1,11 @@
+{
+    "type": "filament",
+	"filament_id": "GFL99",
+    "setting_id": "GFSL99",
+    "name": "QIDI WOOD Rapido @Qidi X-Plus 4 0.4 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "QIDI WOOD Rapido@X4",
+    "pressure_advance": ["0.044"],
+	"compatible_printers": ["X-Plus 4 0.4 nozzle"]
+}

resources/profiles/X 4 Series/filament/QIDI WOOD Rapido @Qidi X-Plus 4 0.6 nozzle.json

@@ -0,0 +1,11 @@
+{
+    "type": "filament",
+	"filament_id": "GFL99",
+    "setting_id": "GFSL99",
+    "name": "QIDI WOOD Rapido @Qidi X-Plus 4 0.6 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "QIDI WOOD Rapido@X4",
+    "pressure_advance": ["0.024"],
+	"compatible_printers": ["X-Plus 4 0.6 nozzle"]
+}

resources/profiles/X 4 Series/filament/QIDI WOOD Rapido @Qidi X-Plus 4 0.8 nozzle.json

@@ -0,0 +1,11 @@
+{
+    "type": "filament",
+	"filament_id": "GFL99",
+    "setting_id": "GFSL99",
+    "name": "QIDI WOOD Rapido @Qidi X-Plus 4 0.8 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "QIDI WOOD Rapido@X4",
+    "pressure_advance": ["0.012"],
+	"compatible_printers": ["X-Plus 4 0.8 nozzle"]
+}

resources/profiles/X 4 Series/filament/QIDI WOOD Rapido.json

@@ -0,0 +1,23 @@
+{
+    "type": "filament",
+	"filament_id": "GFL99",
+    "setting_id": "GFSL99",
+    "name": "QIDI WOOD Rapido@X4",
+    "from": "system",
+    "instantiation": "false",
+    "inherits": "fdm_filament_common",
+    "additional_cooling_fan_speed": ["100"],
+    "filament_density": ["1.23"],
+    "filament_flow_ratio": ["0.95"],
+    "filament_max_volumetric_speed": ["18"],
+    "filament_type": ["PLA"],
+    "nozzle_temperature_range_high": ["220"],
+    "nozzle_temperature_range_low": ["190"],
+    "nozzle_temperature_initial_layer": ["210"],
+    "nozzle_temperature": ["210"],
+    "pressure_advance": ["0.044"],
+    "supertack_plate_temp_initial_layer": ["45"],
+    "supertack_plate_temp": ["45"],
+    "temperature_vitrification": ["45"],
+	"compatible_printers": []
+}

resources/profiles/X 4 Series/filament/fdm_filament_common.json

@@ -54,6 +54,8 @@
     "slow_down_for_layer_cooling": ["1"],
     "slow_down_layer_time": ["8"],
     "slow_down_min_speed": ["20"],
+    "supertack_plate_temp_initial_layer": ["0"],
+    "supertack_plate_temp": ["0"],
     "temperature_vitrification": ["100"],
     "textured_plate_temp_initial_layer" : ["60"],
     "textured_plate_temp" : ["60"]

resources/profiles/X 4 Series/machine/fdm_machine_x_common.json

@@ -57,6 +57,7 @@
     "single_extruder_multi_material": "1",
     "support_air_filtration": ["1"],
     "support_chamber_temp_control": "1",
+    "support_multi_bed_types": "1",
     "thumbnail_size": ["272x272/PNG","96x96/PNG"],
     "wipe": ["1"],
     "z_hop_types": ["Auto Lift"],

resources/web/filament/index.html

@@ -258,6 +258,8 @@
                 <label><input type="checkbox" value="filament19"> PPS-CF</label>
                 <label><input type="checkbox" value="filament20"> TPU 95A-HF</label>
                 <label><input type="checkbox" value="filament21"> UltraPA</label>
+                <label><input type="checkbox" value="filament22"> UltraPA-CF25</label>
+                <label><input type="checkbox" value="filament23"> WOOD Rapido</label>
             </div>
         </div>
     </div>
@@ -289,6 +291,8 @@
                 <th class="filament19">PPS-CF</th>
                 <th class="filament20">TPU 95A-HF</th>
                 <th class="filament21">UltraPA</th>
+                <th class="filament22">UltraPA-CF25</th>
+                <th class="filament23">WOOD Rapido</th>
             </tr>
         </thead>
         <tbody>
@@ -789,6 +793,8 @@
                 document.write('<td>/</td>');//pps-cf
                 document.write('<td>/</td>');//tpu
                 document.write('<td>'+ createProgressBar(50,"#0784FF")+ '</td>');//ultra pa
+                document.write('<td>'+ createProgressBar(50,"#0784FF")+ '</td>');//ultra pa-cf25
+                document.write('<td>'+ createProgressBar(25,"#0784FF")+ '</td>');//wood rapido
                 document.write('</tr>');
                 
                 /*Corrosion resistance*/
@@ -816,6 +822,8 @@
                 document.write('<td>/</td>');//pps-cf
                 document.write('<td>/</td>');//tpu
                 document.write('<td>'+ createProgressBar(50,"#5cb85c")+ '</td>');//ultra pa
+                document.write('<td>/</td>');//ultra pa-cf25
+                document.write('<td>/</td>');//wood rapido
                 document.write('</tr>');
 
                 /*Creep resistance*/
@@ -843,6 +851,8 @@
                 document.write('<td>/</td>');//pps-cf
                 document.write('<td>/</td>');//tpu
                 document.write('<td>'+ createProgressBar(50,"#CC6B36")+ '</td>');//ultra pa
+                document.write('<td>/</td>');//ultra pa-cf25
+                document.write('<td>/</td>');//wood rapido
                 document.write('</tr>');
 
                 /*HDT 0.45*/
@@ -870,6 +880,8 @@
                 document.write('<td>242.7℃</td>');//pps-cf
                 document.write('<td>/</td>');//tpu
                 document.write('<td>77.8℃</td>');//ultra pa
+                document.write('<td>96.1℃</td>');//ultra pa-cf25
+                document.write('<td>57℃</td>');//wood rapido
                 document.write('</tr>');
 
                 /*HDT 1.80*/
@@ -897,6 +909,8 @@
                 document.write('<td>/</td>');//pps-cf
                 document.write('<td>/</td>');//tpu
                 document.write('<td>77.8℃</td>');//ultra pa
+                document.write('<td>83℃</td>');//ultra pa-cf25
+                document.write('<td>/</td>');//wood rapido
                 document.write('</tr>');
 
                 /*Tensile strength*/
@@ -924,6 +938,8 @@
                 document.write('<td>60 MPa<br>'+ createProgressBar(60/150*100,"#CCB70B")+ '</td>');//pps-cf
                 document.write('<td>31.81 MPa<br>'+ createProgressBar(31.81/150*100,"#CCB70B")+ '</td>');//tpu
                 document.write('<td>86.15 ± 0.56 MPa<br>'+ createProgressBar(86.15/150*100,"#CCB70B")+ '</td>');//ultra pa
+                document.write('<td>109.68 ± 1.84 MPa<br>'+ createProgressBar(109.68/150*100,"#CCB70B")+ '</td>');//ultra pa-cf25
+                document.write('<td>26.5 ± 1.5 MPa<br>'+ createProgressBar(26.5/150*100,"#CCB70B")+ '</td>');//wood rapido
                 document.write('</tr>');
 
                 /*Tensile modulus*/
@@ -951,6 +967,8 @@
                 document.write('<td>4800 MPa<br>'+ createProgressBar(4800/10000*100,"#CC0003")+ '</td>');//pps-cf
                 document.write('<td>/</td>');//tpu
                 document.write('<td>3609.22 ± 153.31 MPa<br>'+ createProgressBar(3609.22/10000*100,"#CC0003")+ '</td>');//ultra pa
+                document.write('<td>8996.26 ± 232.21 MPa<br>'+ createProgressBar(8996.26/10000*100,"#CC0003")+ '</td>');//ultra pa-cf25
+                document.write('<td>/</td>');//wood rapido
                 document.write('</tr>');
 
                 /*Elongation at break*/
@@ -978,6 +996,8 @@
                 document.write('<td>6%</td>');//pps-cf
                 document.write('<td>471%</td>');//tpu
                 document.write('<td>11.68 ± 3.36%</td>');//ultra pa
+                document.write('<td>2.18 ± 0.14%</td>');//ultra pa-cf25
+                document.write('<td>9 ± 1%</td>');//wood rapido
                 document.write('</tr>');
 
                 /*Flexural strength*/
@@ -1005,33 +1025,37 @@
                 document.write('<td>105 MPa<br>'+ createProgressBar(105/200*100,"#16417C")+ '</td>');//pps-cf
                 document.write('<td>/</td>');//tpu
                 document.write('<td>121.47 ± 3.14 MPa<br>'+ createProgressBar(121.47/200*100,"#16417C")+ '</td>');//ultra pa
+                document.write('<td>176.24 ± 3.51 MPa<br>'+ createProgressBar(176.24/200*100,"#16417C")+ '</td>');//ultra pa-cf25
+                document.write('<td>/</td>');//wood rapido
                 document.write('</tr>');
 
                 /*Flexural modulus*/
                 document.write('<tr>');
                 document.write('<td></td>');
                 document.write('<td>' + getTranslation('Flexural modulus', lang) + '</td>');
-                document.write('<td>2850 ± 150 MPa<br>'+ createProgressBar(2850/8000*100,"#EA3FF7")+ '</td>');//pla
+                document.write('<td>2850 ± 150 MPa<br>'+ createProgressBar(2850/10000*100,"#EA3FF7")+ '</td>');//pla
-                document.write('<td>2200 ± 200 MPa<br>'+ createProgressBar(2200/8000*100,"#EA3FF7")+ '</td>');//pla matte
+                document.write('<td>2200 ± 200 MPa<br>'+ createProgressBar(2200/10000*100,"#EA3FF7")+ '</td>');//pla matte
-                document.write('<td>2300 MPa<br>'+ createProgressBar(2300/8000*100,"#EA3FF7")+ '</td>');//pla metal
+                document.write('<td>2300 MPa<br>'+ createProgressBar(2300/10000*100,"#EA3FF7")+ '</td>');//pla metal
-                document.write('<td>2100 MPa<br>'+ createProgressBar(2100/8000*100,"#EA3FF7")+ '</td>');//pla silk
+                document.write('<td>2100 MPa<br>'+ createProgressBar(2100/10000*100,"#EA3FF7")+ '</td>');//pla silk
-                document.write('<td>4197.66 ± 279.96 MPa<br>'+ createProgressBar(4197/8000*100,"#EA3FF7")+ '</td>');//pla cf
+                document.write('<td>4197.66 ± 279.96 MPa<br>'+ createProgressBar(4197/10000*100,"#EA3FF7")+ '</td>');//pla cf
-                document.write('<td>77.5 ± 2.5 MPa<br>'+ createProgressBar(77.5/8000*100,"#EA3FF7")+ '</td>');//abs
+                document.write('<td>77.5 ± 2.5 MPa<br>'+ createProgressBar(77.5/10000*100,"#EA3FF7")+ '</td>');//abs
-                document.write('<td>2400.00 ± 79.69 MPa<br>'+ createProgressBar(2400/8000*100,"#EA3FF7")+ '</td>');//abs odorless
+                document.write('<td>2400.00 ± 79.69 MPa<br>'+ createProgressBar(2400/10000*100,"#EA3FF7")+ '</td>');//abs odorless
-                document.write('<td>3300 MPa<br>'+ createProgressBar(3300/8000*100,"#EA3FF7")+ '</td>');//abs metal
+                document.write('<td>3300 MPa<br>'+ createProgressBar(3300/10000*100,"#EA3FF7")+ '</td>');//abs metal
-                document.write('<td>3531.71 ± 75.79 MPa<br>'+ createProgressBar(3531.71/8000*100,"#EA3FF7")+ '</td>');//abs gf
+                document.write('<td>3531.71 ± 75.79 MPa<br>'+ createProgressBar(3531.71/10000*100,"#EA3FF7")+ '</td>');//abs gf
-                document.write('<td>2399.00 ± 147.00 MPa<br>'+ createProgressBar(2399/8000*100,"#EA3FF7")+ '</td>');//asa
+                document.write('<td>2399.00 ± 147.00 MPa<br>'+ createProgressBar(2399/10000*100,"#EA3FF7")+ '</td>');//asa
-                document.write('<td>457.94 ± 20.84 MPa<br>'+ createProgressBar(457.94/8000*100,"#EA3FF7")+ '</td>');//asa aero
+                document.write('<td>457.94 ± 20.84 MPa<br>'+ createProgressBar(457.94/10000*100,"#EA3FF7")+ '</td>');//asa aero
-                document.write('<td>4667.43 ± 339.80 MPa<br>'+ createProgressBar(4667.43/8000*100,"#EA3FF7")+ '</td>');//pa12 cf
+                document.write('<td>4667.43 ± 339.80 MPa<br>'+ createProgressBar(4667.43/10000*100,"#EA3FF7")+ '</td>');//pa12 cf
-                document.write('<td>5969.35 ± 145.28 MPa<br>'+ createProgressBar(5969.33/8000*100,"#EA3FF7")+ '</td>');//paht cf
+                document.write('<td>5969.35 ± 145.28 MPa<br>'+ createProgressBar(5969.33/10000*100,"#EA3FF7")+ '</td>');//paht cf
-                document.write('<td>4135.14 ± 64.91 MPa<br>'+ createProgressBar(4135.14/8000*100,"#EA3FF7")+ '</td>');//paht gf
+                document.write('<td>4135.14 ± 64.91 MPa<br>'+ createProgressBar(4135.14/10000*100,"#EA3FF7")+ '</td>');//paht gf
-                document.write('<td>2504.55 ± 22.88 MPa<br>'+ createProgressBar(2504.55/8000*100,"#EA3FF7")+ '</td>');//pc abs fr
+                document.write('<td>2504.55 ± 22.88 MPa<br>'+ createProgressBar(2504.55/10000*100,"#EA3FF7")+ '</td>');//pc abs fr
-                document.write('<td>5313.21 ± 197.89 MPa<br>'+ createProgressBar(5313.21/8000*100,"#EA3FF7")+ '</td>');//pet cf
+                document.write('<td>5313.21 ± 197.89 MPa<br>'+ createProgressBar(5313.21/10000*100,"#EA3FF7")+ '</td>');//pet cf
-                document.write('<td>3650.32 ± 65.81 MPa<br>'+ createProgressBar(3650.32/8000*100,"#EA3FF7")+ '</td>');//pet gf
+                document.write('<td>3650.32 ± 65.81 MPa<br>'+ createProgressBar(3650.32/10000*100,"#EA3FF7")+ '</td>');//pet gf
-                document.write('<td>1919 ± 54 MPa<br>'+ createProgressBar(1919/8000*100,"#EA3FF7")+ '</td>');//petg
+                document.write('<td>1919 ± 54 MPa<br>'+ createProgressBar(1919/10000*100,"#EA3FF7")+ '</td>');//petg
-                document.write('<td>5500 MPa<br>'+ createProgressBar(5500/8000*100,"#EA3FF7")+ '</td>');//pps-cf
+                document.write('<td>5500 MPa<br>'+ createProgressBar(5500/10000*100,"#EA3FF7")+ '</td>');//pps-cf
                 document.write('<td>/</td>');//tpu
-                document.write('<td>3314.03 ± 181.88 MPa<br>'+ createProgressBar(3314.03/8000*100,"#EA3FF7")+ '</td>');//ultra pa
+                document.write('<td>3314.03 ± 181.88 MPa<br>'+ createProgressBar(3314.03/10000*100,"#EA3FF7")+ '</td>');//ultra pa
+                document.write('<td>8487.47 ± 246.46 MPa<br>'+ createProgressBar(8487.47/10000*100,"#EA3FF7")+ '</td>');//ultra pa-cf25
+                document.write('<td>/</td>');//wood rapido
                 document.write('</tr>');
 
                 /*Notch impact strength*/
@@ -1059,6 +1083,8 @@
                 document.write('<td>11KJ/㎡<br>'+ createProgressBar(11/30*100,"#F77089")+ '</td>');//pps-cf
                 document.write('<td>/</td>');//tpu
                 document.write('<td>5.78 ± 0.30KJ/㎡<br>'+ createProgressBar(5.78/30*100,"#F77089")+ '</td>');//ultra pa
+                document.write('<td>12.04 ± 0.94KJ/㎡<br>'+ createProgressBar(12.04/30*100,"#F77089")+ '</td>');//ultra pa-cf25
+                document.write('<td>3.5 ± 0.5KJ/㎡<br>'+ createProgressBar(3.5/30*100,"#F77089")+ '</td>');//wood rapido
                 document.write('</tr>');
 
                 /*Drying*/
@@ -1086,6 +1112,8 @@
                 document.write('<td>' + getTranslation('Need to dry', lang) + '</td>');//pps-cf
                 document.write('<td>' + getTranslation('Need to dry', lang) + '</td>');//tpu
                 document.write('<td>' + getTranslation('Need to dry', lang) + '</td>');//ultra pa
+                document.write('<td>' + getTranslation('Need to dry', lang) + '</td>');//ultra pa-cf25
+                document.write('<td>' + getTranslation('Recommended drying', lang) + '</td>');//wood rapido
                 document.write('</tr>');
                 
                 /*Dry conditions*/
@@ -1113,6 +1141,8 @@
                 document.write('<td>/</td>');//pps-cf
                 document.write('<td>70-80℃ 4-6h</td>');//tpu
                 document.write('<td>100-120℃ 4-6h</td>');//ultra pa
+                document.write('<td>80-100℃ 4-6h</td>');//ultra pa-cf25
+                document.write('<td>/</td>');//wood rapido
                 document.write('</tr>');
                 
                 /*Suitable hot bed temperature*/
@@ -1140,6 +1170,8 @@
                 document.write('<td>80-110℃</td>');//pps-cf
                 document.write('<td>20-60℃</td>');//tpu
                 document.write('<td>70-80℃</td>');//ultra pa
+                document.write('<td>70-80℃</td>');//ultra pa-cf25
+                document.write('<td>60℃</td>');//wood rapido
                 document.write('</tr>');
 
                 /*Sealed box*/
@@ -1167,6 +1199,8 @@
                 document.write('<td>√</td>');//pps-cf
                 document.write('<td>×</td>');//tpu
                 document.write('<td>×</td>');//ultra pa
+                document.write('<td>×</td>');//ultra pa-cf25
+                document.write('<td>×</td>');//wood rapido
                 document.write('</tr>');
                 
                 /*Print settings*/
@@ -1194,6 +1228,8 @@
                 document.write('<td>300-370℃</td>');//pps-cf
                 document.write('<td>210-230℃</td>');//tpu
                 document.write('<td>280-300℃</td>');//ultra pa
+                document.write('<td>300-340℃</td>');//ultra pa-cf25
+                document.write('<td>190-220℃</td>');//wood rapido
                 document.write('</tr>');
                 
                 /*Print speed*/
@@ -1221,6 +1257,8 @@
                 document.write('<td>＜200mm/s</td>');//pps-cf
                 document.write('<td>＜120mm/s</td>');//tpu
                 document.write('<td>＜90mm/s</td>');//ultra pa
+                document.write('<td>＜120mm/s</td>');//ultra pa-cf25
+                document.write('<td>＜200mm/s</td>');//wood rapido
                 document.write('</tr>');
                 
                 /*Post processing*/
@@ -1248,6 +1286,8 @@
                 document.write('<td>/</td>');//pps-cf
                 document.write('<td>/</td>');//tpu
                 document.write('<td>/</td>');//ultra pa
+                document.write('<td>80-100℃</td>');//ultra pa-cf25
+                document.write('<td>/</td>');//wood rapido
                 document.write('</tr>');