diff --git a/qdt/i18n/QIDIStudio.pot b/qdt/i18n/QIDIStudio.pot index 4b70b81..f720124 100644 --- a/qdt/i18n/QIDIStudio.pot +++ b/qdt/i18n/QIDIStudio.pot @@ -8719,12 +8719,11 @@ msgstr "" msgid "" "Enable pressure advance, auto calibration result will be overwriten once " -"enabled. Useless for QIDI Printer" +"enabled." msgstr "" msgid "" -"Pressure advance(Klipper) AKA Linear advance factor(Marlin). Useless for " -"QIDI Printer" +"Pressure advance(Klipper) AKA Linear advance factor(Marlin)." msgstr "" msgid "Filament notes" diff --git a/qdt/i18n/cs/QIDIStudio_cs.po b/qdt/i18n/cs/QIDIStudio_cs.po index a69b5d3..9761330 100644 --- a/qdt/i18n/cs/QIDIStudio_cs.po +++ b/qdt/i18n/cs/QIDIStudio_cs.po @@ -9252,17 +9252,16 @@ msgstr "Povolit předstih tlaku (PA)" msgid "" "Enable pressure advance, auto calibration result will be overwriten once " -"enabled. Useless for QIDI Printer" +"enabled." msgstr "" "Povolit předstih tlaku (PA), výsledek automatické kalibrace bude přepsán po " -"aktivaci. Nepoužitelné pro tiskárny QIDI" +"aktivaci" msgid "" -"Pressure advance(Klipper) AKA Linear advance factor(Marlin). Useless for " -"QIDI Printer" +"Pressure advance(Klipper) AKA Linear advance factor(Marlin)." msgstr "" "Předstih tlaku (PA) (Klipper) AKA také známá jako faktor Linear advance " -"(Marlin). Nepoužitelné pro tiskárny QIDI" +"(Marlin)" msgid "Filament notes" msgstr "" diff --git a/qdt/i18n/de/QIDIStudio_de.po b/qdt/i18n/de/QIDIStudio_de.po index 53fec33..4020e86 100644 --- a/qdt/i18n/de/QIDIStudio_de.po +++ b/qdt/i18n/de/QIDIStudio_de.po @@ -9707,18 +9707,16 @@ msgstr "Pressure Advance aktivieren" msgid "" "Enable pressure advance, auto calibration result will be overwriten once " -"enabled. Useless for QIDI Printer" +"enabled." msgstr "" "Pressure Advance aktivieren? Die Ergebnisse der automatischen Kalibrierung " -"werden nach der Aktivierung überschrieben. Hinweis: Dies ist für QIDI-" +"werden nach der Aktivierung überschrieben." "Drucker nutzlos." msgid "" -"Pressure advance(Klipper) AKA Linear advance factor(Marlin). Useless for " -"QIDI Printer" +"Pressure advance(Klipper) AKA Linear advance factor(Marlin)." msgstr "" -"Pressure Advance (Klipper) AKA Linear Advance (Marlin). Für QIDI-Drucker " -"nutzlos" +"Pressure Advance (Klipper) AKA Linear Advance (Marlin)." msgid "Filament notes" msgstr "Filament notes" diff --git a/qdt/i18n/en/QIDIStudio_en.po b/qdt/i18n/en/QIDIStudio_en.po index 035f7eb..f015138 100644 --- a/qdt/i18n/en/QIDIStudio_en.po +++ b/qdt/i18n/en/QIDIStudio_en.po @@ -9471,17 +9471,15 @@ msgstr "Enable pressure advance" msgid "" "Enable pressure advance, auto calibration result will be overwriten once " -"enabled. Useless for QIDI Printer" +"enabled." msgstr "" "Enable pressure advance, auto calibration result will be overwriten once " -"enabled. Useless for QIDI Printer" +"enabled." msgid "" -"Pressure advance(Klipper) AKA Linear advance factor(Marlin). Useless for " -"QIDI Printer" +"Pressure advance(Klipper) AKA Linear advance factor(Marlin)." msgstr "" -"Pressure advance(Klipper) AKA Linear advance factor(Marlin). Useless for " -"QIDI Printer" +"Pressure advance(Klipper) AKA Linear advance factor(Marlin)." msgid "Filament notes" msgstr "Filament notes" diff --git a/qdt/i18n/es/QIDIStudio_es.po b/qdt/i18n/es/QIDIStudio_es.po index f526027..1647ee6 100644 --- a/qdt/i18n/es/QIDIStudio_es.po +++ b/qdt/i18n/es/QIDIStudio_es.po @@ -9672,18 +9672,16 @@ msgstr "Habilitar avance de presión" msgid "" "Enable pressure advance, auto calibration result will be overwriten once " -"enabled. Useless for QIDI Printer" +"enabled." msgstr "" "¿Habilitar el avance de presión? Los resultados de la calibración automática " -"se sobrescribirán una vez activada. Nota: esto es inútil para las impresoras " -"QIDI." +"se sobrescribirán una vez activada." msgid "" -"Pressure advance(Klipper) AKA Linear advance factor(Marlin). Useless for " -"QIDI Printer" +"Pressure advance(Klipper) AKA Linear advance factor(Marlin)." msgstr "" "Avance de presión (Klipper) también conocido como factor de avance lineal " -"(Marlin). Es inútil para impresoras QIDI" +"(Marlin)." msgid "Filament notes" msgstr "Filament notes" diff --git a/qdt/i18n/fr/QIDIStudio_fr.po b/qdt/i18n/fr/QIDIStudio_fr.po index 7a844ae..8583a7b 100644 --- a/qdt/i18n/fr/QIDIStudio_fr.po +++ b/qdt/i18n/fr/QIDIStudio_fr.po @@ -9706,17 +9706,15 @@ msgstr "Activer l'avance à la pression" msgid "" "Enable pressure advance, auto calibration result will be overwriten once " -"enabled. Useless for QIDI Printer" +"enabled." msgstr "" "Activez l'avance de pression, le résultat de l'étalonnage automatique sera " -"remplacé une fois activé. Inutile pour les Imprimantes QIDI" +"remplacé une fois activé." msgid "" -"Pressure advance(Klipper) AKA Linear advance factor(Marlin). Useless for " -"QIDI Printer" +"Pressure advance(Klipper) AKA Linear advance factor(Marlin)." msgstr "" -"Pressure advance (Klipper) ou Linear advance factor (Marlin). Inutile pour " -"les imprimantes QIDI" +"Pressure advance (Klipper) ou Linear advance factor (Marlin)." msgid "Filament notes" msgstr "Filament notes" diff --git a/qdt/i18n/hu/QIDIStudio_hu.po b/qdt/i18n/hu/QIDIStudio_hu.po index a581307..e944b3e 100644 --- a/qdt/i18n/hu/QIDIStudio_hu.po +++ b/qdt/i18n/hu/QIDIStudio_hu.po @@ -9589,18 +9589,15 @@ msgstr "Nyomáselőtolás engedélyezése" msgid "" "Enable pressure advance, auto calibration result will be overwriten once " -"enabled. Useless for QIDI Printer" +"enabled." msgstr "" "Engedélyezed a nyomáselőtolást? Az automatikus kalibrálási eredmények az " -"engedélyezés után felülíródnak. Megjegyzés: a QIDI nyomtatók számára ez a " -"funkció haszontalan" +"engedélyezés után felülíródnak." msgid "" -"Pressure advance(Klipper) AKA Linear advance factor(Marlin). Useless for " -"QIDI Printer" +"Pressure advance(Klipper) AKA Linear advance factor(Marlin)." msgstr "" "Nyomáselőtolás (Klipper) vagy más néven lineáris előtolási tényező (Marlin). " -"A QIDI nyomtatók számára ez a funkció haszontalan" msgid "Filament notes" msgstr "Filament notes" diff --git a/qdt/i18n/it/QIDIStudio_it.po b/qdt/i18n/it/QIDIStudio_it.po index d51d886..b00f2c6 100644 --- a/qdt/i18n/it/QIDIStudio_it.po +++ b/qdt/i18n/it/QIDIStudio_it.po @@ -9616,17 +9616,15 @@ msgstr "Abilita il pressure advance" msgid "" "Enable pressure advance, auto calibration result will be overwriten once " -"enabled. Useless for QIDI Printer" +"enabled." msgstr "" "Abilita il pressure advance, I risultati della calibrazione automatica " -"verranno sovrascritti una volta abilitati. Inutile per le stampanti QIDI." +"verranno sovrascritti una volta abilitati." msgid "" -"Pressure advance(Klipper) AKA Linear advance factor(Marlin). Useless for " -"QIDI Printer" +"Pressure advance(Klipper) AKA Linear advance factor(Marlin)." msgstr "" -"Pressure advance(Klipper) oppure Linear advance factor(Marlin). Inutile per " -"le stampanti QIDI" +"Pressure advance(Klipper) oppure Linear advance factor(Marlin)." msgid "Filament notes" msgstr "Filament notes" diff --git a/qdt/i18n/ja/QIDIStudio_ja.po b/qdt/i18n/ja/QIDIStudio_ja.po index c739891..18f5f6e 100644 --- a/qdt/i18n/ja/QIDIStudio_ja.po +++ b/qdt/i18n/ja/QIDIStudio_ja.po @@ -9315,17 +9315,15 @@ msgstr "Enable pressure advance" msgid "" "Enable pressure advance, auto calibration result will be overwriten once " -"enabled. Useless for QIDI Printer" +"enabled." msgstr "" "Enable pressure advance? Auto calibration results will be overwritten once " -"enabled. Note: this is useless for QIDI Printers." +"enabled." msgid "" -"Pressure advance(Klipper) AKA Linear advance factor(Marlin). Useless for " -"QIDI Printer" +"Pressure advance(Klipper) AKA Linear advance factor(Marlin)." msgstr "" -"Pressure advance(Klipper) AKA Linear advance factor(Marlin). Useless for " -"QIDI Printers" +"Pressure advance(Klipper) AKA Linear advance factor(Marlin)." msgid "Filament notes" msgstr "Filament notes" diff --git a/qdt/i18n/ko/QIDIStudio_ko.po b/qdt/i18n/ko/QIDIStudio_ko.po index 5fce2aa..33ffc58 100644 --- a/qdt/i18n/ko/QIDIStudio_ko.po +++ b/qdt/i18n/ko/QIDIStudio_ko.po @@ -9371,17 +9371,14 @@ msgstr "압력 전진 활성화" msgid "" "Enable pressure advance, auto calibration result will be overwriten once " -"enabled. Useless for QIDI Printer" +"enabled." msgstr "" -"압력 전진을 활성화하면 자동 교정 결과가 활성화되면 덮어쓰게 됩니다. QIDI 프" -"린터에는 쓸모가 없습니다." +"압력 전진을 활성화하면 자동 교정 결과가 활성화되면 덮어쓰게 됩니다." msgid "" -"Pressure advance(Klipper) AKA Linear advance factor(Marlin). Useless for " -"QIDI Printer" +"Pressure advance(Klipper) AKA Linear advance factor(Marlin)." msgstr "" -"압력 전진(Klipper) 일명 선형 전진 계수(Marlin)입니다. QIDI 프린터에는 쓸모" -"가 없습니다." +"압력 전진(Klipper) 일명 선형 전진 계수(Marlin)입니다." msgid "Filament notes" msgstr "필라멘트 노트" diff --git a/qdt/i18n/nl/QIDIStudio_nl.po b/qdt/i18n/nl/QIDIStudio_nl.po index a4b661c..5b1e2e0 100644 --- a/qdt/i18n/nl/QIDIStudio_nl.po +++ b/qdt/i18n/nl/QIDIStudio_nl.po @@ -9668,17 +9668,15 @@ msgstr "Pressure advance inschakelen" msgid "" "Enable pressure advance, auto calibration result will be overwriten once " -"enabled. Useless for QIDI Printer" +"enabled." msgstr "" "Schakel drukvooruitgang in, het automatische kalibratieresultaat wordt " -"overschreven zodra het is ingeschakeld. Nutteloos voor QIDI Printer" +"overschreven zodra het is ingeschakeld." msgid "" -"Pressure advance(Klipper) AKA Linear advance factor(Marlin). Useless for " -"QIDI Printer" +"Pressure advance(Klipper) AKA Linear advance factor(Marlin)." msgstr "" "Drukvervroeging (Klipper) AKA Lineaire vervroegingsfactor (Marlin). " -"Nutteloos voor QIDI Printer" msgid "Filament notes" msgstr "Filament notes" diff --git a/qdt/i18n/pl/QIDIStudio_pl.po b/qdt/i18n/pl/QIDIStudio_pl.po index 68d9e74..8e9483b 100644 --- a/qdt/i18n/pl/QIDIStudio_pl.po +++ b/qdt/i18n/pl/QIDIStudio_pl.po @@ -9609,17 +9609,15 @@ msgstr "Włącz zaawansowane ciśnienie" msgid "" "Enable pressure advance, auto calibration result will be overwriten once " -"enabled. Useless for QIDI Printer" +"enabled." msgstr "" "Włącz zaawansowane ciśnienie, wynik automatycznej kalibracji zostanie " -"nadpisany po włączeniu. Nieprzydatne dla drukarki QIDI" +"nadpisany po włączeniu." msgid "" -"Pressure advance(Klipper) AKA Linear advance factor(Marlin). Useless for " -"QIDI Printer" +"Pressure advance(Klipper) AKA Linear advance factor(Marlin)." msgstr "" -"Pressure advance(Klipper) AKA Linear advance factor(Marlin). Nieprzydatne " -"dla drukarek QIDI" +"Pressure advance(Klipper) AKA Linear advance factor(Marlin)." msgid "Filament notes" msgstr "Notatki dotyczące Filamentu" diff --git a/qdt/i18n/pt-BR/QIDIStudio_pt-BR.po b/qdt/i18n/pt-BR/QIDIStudio_pt-BR.po index 69f804b..b10eeb3 100644 --- a/qdt/i18n/pt-BR/QIDIStudio_pt-BR.po +++ b/qdt/i18n/pt-BR/QIDIStudio_pt-BR.po @@ -9590,17 +9590,16 @@ msgstr "Permitir avanço de pressão" msgid "" "Enable pressure advance, auto calibration result will be overwriten once " -"enabled. Useless for QIDI Printer" +"enabled." msgstr "" "Ative o avanço da pressão, o resultado da calibração automática será " -"sobrescrito quando ativado. Inútil para a impressora QIDI" +"sobrescrito quando ativado." msgid "" -"Pressure advance(Klipper) AKA Linear advance factor(Marlin). Useless for " -"QIDI Printer" +"Pressure advance(Klipper) AKA Linear advance factor(Marlin)." msgstr "" "Avanço de pressão (Klipper), também conhecido como fator de avanço linear " -"(Marlin). Inútil para a impressora QIDI" +"(Marlin)." msgid "Filament notes" msgstr "Filament notes" diff --git a/qdt/i18n/ru/QIDIStudio_ru.po b/qdt/i18n/ru/QIDIStudio_ru.po index defa7d5..d90e229 100644 --- a/qdt/i18n/ru/QIDIStudio_ru.po +++ b/qdt/i18n/ru/QIDIStudio_ru.po @@ -9809,19 +9809,16 @@ msgstr "Включить Pressure advance" msgid "" "Enable pressure advance, auto calibration result will be overwriten once " -"enabled. Useless for QIDI Printer" +"enabled." msgstr "" "Включить Pressure advance (Прогнозирование давления). Результат " -"автокалибровки будет перезаписан после включения. Бесполезная функция для " -"принтера QIDI." +"автокалибровки будет перезаписан после включения." msgid "" -"Pressure advance(Klipper) AKA Linear advance factor(Marlin). Useless for " -"QIDI Printer" +"Pressure advance(Klipper) AKA Linear advance factor(Marlin)." msgstr "" "Pressure advance (Прогнозирование давления) в прошивки Klipper, это одно и " -"тоже что Linear advance в прошивке Marlin. Бесполезная функция для принтера " -"QIDI." +"тоже что Linear advance в прошивке Marlin." msgid "Filament notes" msgstr "Примечание о прутке" diff --git a/qdt/i18n/sv/QIDIStudio_sv.po b/qdt/i18n/sv/QIDIStudio_sv.po index 59cfc4e..c9d4fe6 100644 --- a/qdt/i18n/sv/QIDIStudio_sv.po +++ b/qdt/i18n/sv/QIDIStudio_sv.po @@ -9514,17 +9514,15 @@ msgstr "Aktivera pressure advance" msgid "" "Enable pressure advance, auto calibration result will be overwriten once " -"enabled. Useless for QIDI Printer" +"enabled." msgstr "" "Aktivera pressure advance? Auto kalibrerings resultat kommer att skrivas " -"över när de har aktiverats. Värdelöst för QIDI printer." +"över när de har aktiverats." msgid "" -"Pressure advance(Klipper) AKA Linear advance factor(Marlin). Useless for " -"QIDI Printer" +"Pressure advance(Klipper) AKA Linear advance factor(Marlin)." msgstr "" -"Pressure advance(Klipper) AKA Linear advance factor(Marlin). Oanvändbar för " -"QIDI printer" +"Pressure advance(Klipper) AKA Linear advance factor(Marlin)." msgid "Filament notes" msgstr "Filament notes" diff --git a/qdt/i18n/tr/QIDIStudio_tr.po b/qdt/i18n/tr/QIDIStudio_tr.po index 501faf1..f50d0da 100644 --- a/qdt/i18n/tr/QIDIStudio_tr.po +++ b/qdt/i18n/tr/QIDIStudio_tr.po @@ -9564,17 +9564,15 @@ msgstr "Basınç Avansı (PA)" msgid "" "Enable pressure advance, auto calibration result will be overwriten once " -"enabled. Useless for QIDI Printer" +"enabled." msgstr "" "Basınç avansını etkinleştirin, otomatik kalibrasyon sonucu " -"etkinleştirildikten sonra üzerine yazılacaktır. QIDI Yazıcı için kullanışsız" +"etkinleştirildikten sonra üzerine yazılacaktır." msgid "" -"Pressure advance(Klipper) AKA Linear advance factor(Marlin). Useless for QIDI " -"Printer" +"Pressure advance(Klipper) AKA Linear advance factor(Marlin)." msgstr "" -"Basınç avansı (Klipper) AKA Doğrusal avans faktörü (Marlin). QIDI Yazıcı " -"için işe yaramaz" +"Basınç avansı (Klipper) AKA Doğrusal avans faktörü (Marlin)." msgid "Filament notes" msgstr "Filament Notları" diff --git a/qdt/i18n/uk/QIDIStudio_uk.po b/qdt/i18n/uk/QIDIStudio_uk.po index 25002f2..2f96e07 100644 --- a/qdt/i18n/uk/QIDIStudio_uk.po +++ b/qdt/i18n/uk/QIDIStudio_uk.po @@ -9653,18 +9653,15 @@ msgstr "Увімкнути випередження тиску PA" msgid "" "Enable pressure advance, auto calibration result will be overwriten once " -"enabled. Useless for QIDI Printer" +"enabled." msgstr "" "Увімкнути автоматичне вдавлювання, результат автоматичної калібрування буде " -"перезаписаний після увімкнення. Невикористовується для принтерів QIDI " -"Printer" +"перезаписаний після увімкнення." msgid "" -"Pressure advance(Klipper) AKA Linear advance factor(Marlin). Useless for " -"QIDI Printer" +"Pressure advance(Klipper) AKA Linear advance factor(Marlin)." msgstr "" "Підвищення тиску (Klipper) AKA Коефіцієнт лінійного просування (Marlin) " -"Невикористовується для принтерів QIDI Printer" msgid "Filament notes" msgstr "Примітки щодо філаменту" diff --git a/qdt/i18n/zh_cn/QIDIStudio_zh_CN.po b/qdt/i18n/zh_cn/QIDIStudio_zh_CN.po index 75b6001..9ee3f76 100644 --- a/qdt/i18n/zh_cn/QIDIStudio_zh_CN.po +++ b/qdt/i18n/zh_cn/QIDIStudio_zh_CN.po @@ -9103,15 +9103,13 @@ msgstr "启用压力提前补偿" msgid "" "Enable pressure advance, auto calibration result will be overwriten once " -"enabled. Useless for QIDI Printer" -msgstr "启用压力提前补偿，启用后自动校准结果将被覆盖。对于QIDI打印机无效。" +"enabled." +msgstr "启用压力提前补偿，启用后自动校准结果将被覆盖。" msgid "" -"Pressure advance(Klipper) AKA Linear advance factor(Marlin). Useless for " -"QIDI Printer" +"Pressure advance(Klipper) AKA Linear advance factor(Marlin)." msgstr "" -"压力提前补偿（Klipper）也称为线性提前补偿因子（Marlin）。对于QIDI打印机无" -"效。" +"压力提前补偿（Klipper）也称为线性提前补偿因子（Marlin）。" msgid "Filament notes" msgstr "" diff --git a/resources/i18n/cs/QIDIStudio.mo b/resources/i18n/cs/QIDIStudio.mo index b80c37c..dcac9de 100644 Binary files a/resources/i18n/cs/QIDIStudio.mo and b/resources/i18n/cs/QIDIStudio.mo differ diff --git a/resources/i18n/de/QIDIStudio.mo b/resources/i18n/de/QIDIStudio.mo index 06f8db2..39a2058 100644 Binary files a/resources/i18n/de/QIDIStudio.mo and b/resources/i18n/de/QIDIStudio.mo differ diff --git a/resources/i18n/en/QIDIStudio.mo b/resources/i18n/en/QIDIStudio.mo index 84f249d..0af0756 100644 Binary files a/resources/i18n/en/QIDIStudio.mo and b/resources/i18n/en/QIDIStudio.mo differ diff --git a/resources/i18n/es/QIDIStudio.mo b/resources/i18n/es/QIDIStudio.mo index 87fb78d..c81ccee 100644 Binary files a/resources/i18n/es/QIDIStudio.mo and b/resources/i18n/es/QIDIStudio.mo differ diff --git a/resources/i18n/fr/QIDIStudio.mo b/resources/i18n/fr/QIDIStudio.mo index 89f1310..f76a686 100644 Binary files a/resources/i18n/fr/QIDIStudio.mo and b/resources/i18n/fr/QIDIStudio.mo differ diff --git a/resources/i18n/hu/QIDIStudio.mo b/resources/i18n/hu/QIDIStudio.mo index c12470a..1a6e3b5 100644 Binary files a/resources/i18n/hu/QIDIStudio.mo and b/resources/i18n/hu/QIDIStudio.mo differ diff --git a/resources/i18n/it/QIDIStudio.mo b/resources/i18n/it/QIDIStudio.mo index 18e3de5..ff8dece 100644 Binary files a/resources/i18n/it/QIDIStudio.mo and b/resources/i18n/it/QIDIStudio.mo differ diff --git a/resources/i18n/ja/QIDIStudio.mo b/resources/i18n/ja/QIDIStudio.mo index 5e83f4e..3f64f71 100644 Binary files a/resources/i18n/ja/QIDIStudio.mo and b/resources/i18n/ja/QIDIStudio.mo differ diff --git a/resources/i18n/ko/QIDIStudio.mo b/resources/i18n/ko/QIDIStudio.mo index cdd2139..a9447ee 100644 Binary files a/resources/i18n/ko/QIDIStudio.mo and b/resources/i18n/ko/QIDIStudio.mo differ diff --git a/resources/i18n/nl/QIDIStudio.mo b/resources/i18n/nl/QIDIStudio.mo index c1fc5db..54081c4 100644 Binary files a/resources/i18n/nl/QIDIStudio.mo and b/resources/i18n/nl/QIDIStudio.mo differ diff --git a/resources/i18n/pl/QIDIStudio.mo b/resources/i18n/pl/QIDIStudio.mo index 88a4cdb..e93382f 100644 Binary files a/resources/i18n/pl/QIDIStudio.mo and b/resources/i18n/pl/QIDIStudio.mo differ diff --git a/resources/i18n/pt-BR/QIDIStudio.mo b/resources/i18n/pt-BR/QIDIStudio.mo index 33b7e58..a12b3dd 100644 Binary files a/resources/i18n/pt-BR/QIDIStudio.mo and b/resources/i18n/pt-BR/QIDIStudio.mo differ diff --git a/resources/i18n/pt_br/QIDIStudio.mo b/resources/i18n/pt_br/QIDIStudio.mo index 33b7e58..a12b3dd 100644 Binary files a/resources/i18n/pt_br/QIDIStudio.mo and b/resources/i18n/pt_br/QIDIStudio.mo differ diff --git a/resources/i18n/ru/QIDIStudio.mo b/resources/i18n/ru/QIDIStudio.mo index 772b103..e9b42ee 100644 Binary files a/resources/i18n/ru/QIDIStudio.mo and b/resources/i18n/ru/QIDIStudio.mo differ diff --git a/resources/i18n/sv/QIDIStudio.mo b/resources/i18n/sv/QIDIStudio.mo index 1e78209..3df0b75 100644 Binary files a/resources/i18n/sv/QIDIStudio.mo and b/resources/i18n/sv/QIDIStudio.mo differ diff --git a/resources/i18n/tr/QIDIStudio.mo b/resources/i18n/tr/QIDIStudio.mo index 09c9977..ccef982 100644 Binary files a/resources/i18n/tr/QIDIStudio.mo and b/resources/i18n/tr/QIDIStudio.mo differ diff --git a/resources/i18n/uk/QIDIStudio.mo b/resources/i18n/uk/QIDIStudio.mo index a538444..fc2a46c 100644 Binary files a/resources/i18n/uk/QIDIStudio.mo and b/resources/i18n/uk/QIDIStudio.mo differ diff --git a/resources/i18n/zh_cn/QIDIStudio.mo b/resources/i18n/zh_cn/QIDIStudio.mo index 52af79d..d6fcab8 100644 Binary files a/resources/i18n/zh_cn/QIDIStudio.mo and b/resources/i18n/zh_cn/QIDIStudio.mo differ diff --git a/resources/profiles/Q Series.json b/resources/profiles/Q Series.json index 5d2d44e..2e3f54f 100644 --- a/resources/profiles/Q Series.json +++ b/resources/profiles/Q Series.json @@ -802,6 +802,38 @@ { "name": "QIDI PAHT-GF @Qidi Q1 Pro 0.8 nozzle", "sub_path": "filament/QIDI PAHT-GF @Qidi Q1 Pro 0.8 nozzle.json" + }, + { + "name": "QIDI WOOD Rapido@Q-Series", + "sub_path": "filament/QIDI WOOD Rapido.json" + }, + { + "name": "QIDI WOOD Rapido @Qidi Q1 Pro 0.4 nozzle", + "sub_path": "filament/QIDI WOOD Rapido @Qidi Q1 Pro 0.4 nozzle.json" + }, + { + "name": "QIDI WOOD Rapido @Qidi Q1 Pro 0.6 nozzle", + "sub_path": "filament/QIDI WOOD Rapido @Qidi Q1 Pro 0.6 nozzle.json" + }, + { + "name": "QIDI WOOD Rapido @Qidi Q1 Pro 0.8 nozzle", + "sub_path": "filament/QIDI WOOD Rapido @Qidi Q1 Pro 0.8 nozzle.json" + }, + { + "name": "QIDI UltraPA-CF25@Q-Series", + "sub_path": "filament/QIDI UltraPA-CF25.json" + }, + { + "name": "QIDI UltraPA-CF25 @Qidi Q1 Pro 0.4 nozzle", + "sub_path": "filament/QIDI UltraPA-CF25 @Qidi Q1 Pro 0.4 nozzle.json" + }, + { + "name": "QIDI UltraPA-CF25 @Qidi Q1 Pro 0.6 nozzle", + "sub_path": "filament/QIDI UltraPA-CF25 @Qidi Q1 Pro 0.6 nozzle.json" + }, + { + "name": "QIDI UltraPA-CF25 @Qidi Q1 Pro 0.8 nozzle", + "sub_path": "filament/QIDI UltraPA-CF25 @Qidi Q1 Pro 0.8 nozzle.json" } ], "machine_list": [ diff --git a/resources/profiles/Q Series/filament/Bambu PETG.json b/resources/profiles/Q Series/filament/Bambu PETG.json index 25a1144..1d35e07 100644 --- a/resources/profiles/Q Series/filament/Bambu PETG.json +++ b/resources/profiles/Q Series/filament/Bambu PETG.json @@ -23,7 +23,7 @@ "nozzle_temperature": ["250"], "overhang_fan_speed": ["90"], "overhang_fan_threshold": ["10%"], - "pressure_advance": ["0.086"], + "pressure_advance": ["0.04"], "slow_down_layer_time": ["8"], "temperature_vitrification": ["70"], "textured_plate_temp_initial_layer" : ["80"], diff --git a/resources/profiles/Q Series/filament/Generic PETG.json b/resources/profiles/Q Series/filament/Generic PETG.json index e2ab82d..b294c8f 100644 --- a/resources/profiles/Q Series/filament/Generic PETG.json +++ b/resources/profiles/Q Series/filament/Generic PETG.json @@ -24,7 +24,7 @@ "nozzle_temperature": ["250"], "overhang_fan_speed": ["90"], "overhang_fan_threshold": ["10%"], - "pressure_advance": ["0.086"], + "pressure_advance": ["0.056"], "slow_down_layer_time": ["12"], "temperature_vitrification": ["70"], "textured_plate_temp_initial_layer" : ["80"], diff --git a/resources/profiles/Q Series/filament/HATCHBOX PETG.json b/resources/profiles/Q Series/filament/HATCHBOX PETG.json index 069172f..aeb2b76 100644 --- a/resources/profiles/Q Series/filament/HATCHBOX PETG.json +++ b/resources/profiles/Q Series/filament/HATCHBOX PETG.json @@ -23,7 +23,7 @@ "nozzle_temperature": ["250"], "overhang_fan_speed": ["90"], "overhang_fan_threshold": ["10%"], - "pressure_advance": ["0.086"], + "pressure_advance": ["0.042"], "slow_down_layer_time": ["8"], "temperature_vitrification": ["70"], "textured_plate_temp_initial_layer" : ["80"], diff --git a/resources/profiles/Q Series/filament/QIDI PETG Tough.json b/resources/profiles/Q Series/filament/QIDI PETG Tough.json index db8df34..3433cb3 100644 --- a/resources/profiles/Q Series/filament/QIDI PETG Tough.json +++ b/resources/profiles/Q Series/filament/QIDI PETG Tough.json @@ -22,7 +22,7 @@ "nozzle_temperature": ["250"], "overhang_fan_speed": ["90"], "overhang_fan_threshold": ["10%"], - "pressure_advance": ["0.086"], + "pressure_advance": ["0.056"], "slow_down_layer_time": ["8"], "temperature_vitrification": ["70"], "textured_plate_temp_initial_layer" : ["80"], diff --git a/resources/profiles/Q Series/filament/QIDI UltraPA-CF25 @Qidi Q1 Pro 0.4 nozzle.json b/resources/profiles/Q Series/filament/QIDI UltraPA-CF25 @Qidi Q1 Pro 0.4 nozzle.json new file mode 100644 index 0000000..7767799 --- /dev/null +++ b/resources/profiles/Q Series/filament/QIDI UltraPA-CF25 @Qidi Q1 Pro 0.4 nozzle.json @@ -0,0 +1,10 @@ +{ + "type": "filament", + "filament_id": "GFB99", + "setting_id": "GFSA04", + "instantiation": "true", + "filament_settings_id": ["QIDI UltraPA-CF25 @Qidi Q1 Pro 0.4 nozzle"], + "inherits": "QIDI UltraPA-CF25@Q-Series", + "name": "QIDI UltraPA-CF25 @Qidi Q1 Pro 0.4 nozzle", + "compatible_printers": ["Q1 Pro 0.4 nozzle"] +} diff --git a/resources/profiles/Q Series/filament/QIDI UltraPA-CF25 @Qidi Q1 Pro 0.6 nozzle.json b/resources/profiles/Q Series/filament/QIDI UltraPA-CF25 @Qidi Q1 Pro 0.6 nozzle.json new file mode 100644 index 0000000..3795197 --- /dev/null +++ b/resources/profiles/Q Series/filament/QIDI UltraPA-CF25 @Qidi Q1 Pro 0.6 nozzle.json @@ -0,0 +1,11 @@ +{ + "type": "filament", + "filament_id": "GFB99", + "setting_id": "GFSA04", + "instantiation": "true", + "filament_settings_id": ["QIDI UltraPA-CF25 @Qidi Q1 Pro 0.6 nozzle"], + "inherits": "QIDI UltraPA-CF25@Q-Series", + "name": "QIDI UltraPA-CF25 @Qidi Q1 Pro 0.6 nozzle", + "pressure_advance": ["0.022"], + "compatible_printers": ["Q1 Pro 0.6 nozzle"] +} diff --git a/resources/profiles/Q Series/filament/QIDI UltraPA-CF25 @Qidi Q1 Pro 0.8 nozzle.json b/resources/profiles/Q Series/filament/QIDI UltraPA-CF25 @Qidi Q1 Pro 0.8 nozzle.json new file mode 100644 index 0000000..1a50230 --- /dev/null +++ b/resources/profiles/Q Series/filament/QIDI UltraPA-CF25 @Qidi Q1 Pro 0.8 nozzle.json @@ -0,0 +1,11 @@ +{ + "type": "filament", + "filament_id": "GFB99", + "setting_id": "GFSA04", + "instantiation": "true", + "filament_settings_id": ["QIDI UltraPA-CF25 @Qidi Q1 Pro 0.8 nozzle"], + "inherits": "QIDI UltraPA-CF25@Q-Series", + "name": "QIDI UltraPA-CF25 @Qidi Q1 Pro 0.8 nozzle", + "pressure_advance": ["0.02"], + "compatible_printers": ["Q1 Pro 0.8 nozzle"] +} diff --git a/resources/profiles/Q Series/filament/QIDI UltraPA-CF25.json b/resources/profiles/Q Series/filament/QIDI UltraPA-CF25.json new file mode 100644 index 0000000..ef460ee --- /dev/null +++ b/resources/profiles/Q Series/filament/QIDI UltraPA-CF25.json @@ -0,0 +1,32 @@ +{ + "type": "filament", + "filament_id": "GFN98", + "setting_id": "GFSN99", + "name": "QIDI UltraPA-CF25@Q-Series", + "from": "system", + "instantiation": "false", + "inherits": "fdm_filament_common", + "additional_cooling_fan_speed_unseal": ["0"], + "additional_cooling_fan_speed": ["0"], + "close_fan_the_first_x_layers": ["3"], + "enable_overhang_bridge_fan": ["1"], + "fan_cooling_layer_time": ["5"], + "fan_max_speed": ["40"], + "fan_min_speed": ["20"], + "filament_density": ["1.23"], + "filament_flow_ratio": ["0.94"], + "filament_max_volumetric_speed": ["8"], + "filament_type": ["UltraPA-CF25"], + "nozzle_temperature_initial_layer": ["300"], + "nozzle_temperature_range_high": ["320"], + "nozzle_temperature_range_low": ["300"], + "nozzle_temperature": ["300"], + "overhang_fan_speed": ["40"], + "overhang_fan_threshold": ["0%"], + "pressure_advance": ["0.026"], + "slow_down_layer_time": ["2"], + "temperature_vitrification": ["230"], + "textured_plate_temp_initial_layer" : ["80"], + "textured_plate_temp" : ["80"], + "compatible_printers": [] +} diff --git a/resources/profiles/Q Series/filament/QIDI WOOD Rapido @Qidi Q1 Pro 0.4 nozzle.json b/resources/profiles/Q Series/filament/QIDI WOOD Rapido @Qidi Q1 Pro 0.4 nozzle.json new file mode 100644 index 0000000..cd43970 --- /dev/null +++ b/resources/profiles/Q Series/filament/QIDI WOOD Rapido @Qidi Q1 Pro 0.4 nozzle.json @@ -0,0 +1,10 @@ +{ + "type": "filament", + "filament_id": "GFB99", + "setting_id": "GFSA04", + "instantiation": "true", + "filament_settings_id": ["QIDI WOOD Rapido @Qidi Q1 Pro 0.4 nozzle"], + "inherits": "QIDI WOOD Rapido@Q-Series", + "name": "QIDI WOOD Rapido @Qidi Q1 Pro 0.4 nozzle", + "compatible_printers": ["Q1 Pro 0.4 nozzle"] +} diff --git a/resources/profiles/Q Series/filament/QIDI WOOD Rapido @Qidi Q1 Pro 0.6 nozzle.json b/resources/profiles/Q Series/filament/QIDI WOOD Rapido @Qidi Q1 Pro 0.6 nozzle.json new file mode 100644 index 0000000..9ad42db --- /dev/null +++ b/resources/profiles/Q Series/filament/QIDI WOOD Rapido @Qidi Q1 Pro 0.6 nozzle.json @@ -0,0 +1,11 @@ +{ + "type": "filament", + "filament_id": "GFB99", + "setting_id": "GFSA04", + "instantiation": "true", + "filament_settings_id": ["QIDI WOOD Rapido @Qidi Q1 Pro 0.6 nozzle"], + "inherits": "QIDI WOOD Rapido@Q-Series", + "name": "QIDI WOOD Rapido @Qidi Q1 Pro 0.6 nozzle", + "pressure_advance": ["0.02"], + "compatible_printers": ["Q1 Pro 0.6 nozzle"] +} diff --git a/resources/profiles/Q Series/filament/QIDI WOOD Rapido @Qidi Q1 Pro 0.8 nozzle.json b/resources/profiles/Q Series/filament/QIDI WOOD Rapido @Qidi Q1 Pro 0.8 nozzle.json new file mode 100644 index 0000000..813cc1f --- /dev/null +++ b/resources/profiles/Q Series/filament/QIDI WOOD Rapido @Qidi Q1 Pro 0.8 nozzle.json @@ -0,0 +1,11 @@ +{ + "type": "filament", + "filament_id": "GFB99", + "setting_id": "GFSA04", + "instantiation": "true", + "filament_settings_id": ["QIDI WOOD Rapido @Qidi Q1 Pro 0.8 nozzle"], + "inherits": "QIDI WOOD Rapido@Q-Series", + "name": "QIDI WOOD Rapido @Qidi Q1 Pro 0.8 nozzle", + "pressure_advance": ["0.012"], + "compatible_printers": ["Q1 Pro 0.8 nozzle"] +} diff --git a/resources/profiles/Q Series/filament/QIDI WOOD Rapido.json b/resources/profiles/Q Series/filament/QIDI WOOD Rapido.json new file mode 100644 index 0000000..59b2867 --- /dev/null +++ b/resources/profiles/Q Series/filament/QIDI WOOD Rapido.json @@ -0,0 +1,19 @@ +{ + "type": "filament", + "filament_id": "GFL99", + "setting_id": "GFSL99", + "name": "QIDI WOOD Rapido@Q-Series", + "from": "system", + "instantiation": "false", + "inherits": "fdm_filament_common", + "additional_cooling_fan_speed": ["100"], + "filament_density": ["1.23"], + "filament_flow_ratio": ["0.95"], + "filament_max_volumetric_speed": ["18"], + "filament_type": ["PLA"], + "nozzle_temperature_range_high": ["220"], + "nozzle_temperature_range_low": ["190"], + "pressure_advance": ["0.04"], + "temperature_vitrification": ["45"], + "compatible_printers": [] +} diff --git a/resources/profiles/X 3 Series.json b/resources/profiles/X 3 Series.json index bbb0314..50b5eba 100644 --- a/resources/profiles/X 3 Series.json +++ b/resources/profiles/X 3 Series.json @@ -1944,6 +1944,86 @@ { "name": "QIDI PAHT-GF @Qidi X-Smart 3 0.8 nozzle", "sub_path": "filament/QIDI PAHT-GF @Qidi X-Smart 3 0.8 nozzle.json" + }, + { + "name": "QIDI UltraPA-CF25@X3", + "sub_path": "filament/QIDI UltraPA-CF25.json" + }, + { + "name": "QIDI UltraPA-CF25 @Qidi X-Max 3 0.4 nozzle", + "sub_path": "filament/QIDI UltraPA-CF25 @Qidi X-Max 3 0.4 nozzle.json" + }, + { + "name": "QIDI UltraPA-CF25 @Qidi X-Plus 3 0.4 nozzle", + "sub_path": "filament/QIDI UltraPA-CF25 @Qidi X-Plus 3 0.4 nozzle.json" + }, + { + "name": "QIDI UltraPA-CF25 @Qidi X-Smart 3 0.4 nozzle", + "sub_path": "filament/QIDI UltraPA-CF25 @Qidi X-Smart 3 0.4 nozzle.json" + }, + { + "name": "QIDI UltraPA-CF25 @Qidi X-Max 3 0.6 nozzle", + "sub_path": "filament/QIDI UltraPA-CF25 @Qidi X-Max 3 0.6 nozzle.json" + }, + { + "name": "QIDI UltraPA-CF25 @Qidi X-Plus 3 0.6 nozzle", + "sub_path": "filament/QIDI UltraPA-CF25 @Qidi X-Plus 3 0.6 nozzle.json" + }, + { + "name": "QIDI UltraPA-CF25 @Qidi X-Smart 3 0.6 nozzle", + "sub_path": "filament/QIDI UltraPA-CF25 @Qidi X-Smart 3 0.6 nozzle.json" + }, + { + "name": "QIDI UltraPA-CF25 @Qidi X-Max 3 0.8 nozzle", + "sub_path": "filament/QIDI UltraPA-CF25 @Qidi X-Max 3 0.8 nozzle.json" + }, + { + "name": "QIDI UltraPA-CF25 @Qidi X-Plus 3 0.8 nozzle", + "sub_path": "filament/QIDI UltraPA-CF25 @Qidi X-Plus 3 0.8 nozzle.json" + }, + { + "name": "QIDI UltraPA-CF25 @Qidi X-Smart 3 0.8 nozzle", + "sub_path": "filament/QIDI UltraPA-CF25 @Qidi X-Smart 3 0.8 nozzle.json" + }, + { + "name": "QIDI WOOD Rapido@X3", + "sub_path": "filament/QIDI WOOD Rapido.json" + }, + { + "name": "QIDI WOOD Rapido @Qidi X-Max 3 0.4 nozzle", + "sub_path": "filament/QIDI WOOD Rapido @Qidi X-Max 3 0.4 nozzle.json" + }, + { + "name": "QIDI WOOD Rapido @Qidi X-Plus 3 0.4 nozzle", + "sub_path": "filament/QIDI WOOD Rapido @Qidi X-Plus 3 0.4 nozzle.json" + }, + { + "name": "QIDI WOOD Rapido @Qidi X-Smart 3 0.4 nozzle", + "sub_path": "filament/QIDI WOOD Rapido @Qidi X-Smart 3 0.4 nozzle.json" + }, + { + "name": "QIDI WOOD Rapido @Qidi X-Max 3 0.6 nozzle", + "sub_path": "filament/QIDI WOOD Rapido @Qidi X-Max 3 0.6 nozzle.json" + }, + { + "name": "QIDI WOOD Rapido @Qidi X-Plus 3 0.6 nozzle", + "sub_path": "filament/QIDI WOOD Rapido @Qidi X-Plus 3 0.6 nozzle.json" + }, + { + "name": "QIDI WOOD Rapido @Qidi X-Smart 3 0.6 nozzle", + "sub_path": "filament/QIDI WOOD Rapido @Qidi X-Smart 3 0.6 nozzle.json" + }, + { + "name": "QIDI WOOD Rapido @Qidi X-Max 3 0.8 nozzle", + "sub_path": "filament/QIDI WOOD Rapido @Qidi X-Max 3 0.8 nozzle.json" + }, + { + "name": "QIDI WOOD Rapido @Qidi X-Plus 3 0.8 nozzle", + "sub_path": "filament/QIDI WOOD Rapido @Qidi X-Plus 3 0.8 nozzle.json" + }, + { + "name": "QIDI WOOD Rapido @Qidi X-Smart 3 0.8 nozzle", + "sub_path": "filament/QIDI WOOD Rapido @Qidi X-Smart 3 0.8 nozzle.json" } ], "machine_list": [ diff --git a/resources/profiles/X 3 Series/filament/QIDI UltraPA-CF25 @Qidi X-Max 3 0.4 nozzle.json b/resources/profiles/X 3 Series/filament/QIDI UltraPA-CF25 @Qidi X-Max 3 0.4 nozzle.json new file mode 100644 index 0000000..9dd579a --- /dev/null +++ b/resources/profiles/X 3 Series/filament/QIDI UltraPA-CF25 @Qidi X-Max 3 0.4 nozzle.json @@ -0,0 +1,10 @@ +{ + "type": "filament", + "filament_id": "GFN98", + "setting_id": "GFSN99", + "name": "QIDI UltraPA-CF25 @Qidi X-Max 3 0.4 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "QIDI UltraPA-CF25@X3", + "compatible_printers": ["X-Max 3 0.4 nozzle"] +} diff --git a/resources/profiles/X 3 Series/filament/QIDI UltraPA-CF25 @Qidi X-Max 3 0.6 nozzle.json b/resources/profiles/X 3 Series/filament/QIDI UltraPA-CF25 @Qidi X-Max 3 0.6 nozzle.json new file mode 100644 index 0000000..171ae59 --- /dev/null +++ b/resources/profiles/X 3 Series/filament/QIDI UltraPA-CF25 @Qidi X-Max 3 0.6 nozzle.json @@ -0,0 +1,10 @@ +{ + "type": "filament", + "filament_id": "GFN98", + "setting_id": "GFSN99", + "name": "QIDI UltraPA-CF25 @Qidi X-Max 3 0.6 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "QIDI UltraPA-CF25@X3", + "compatible_printers": ["X-Max 3 0.6 nozzle"] +} diff --git a/resources/profiles/X 3 Series/filament/QIDI UltraPA-CF25 @Qidi X-Max 3 0.8 nozzle.json b/resources/profiles/X 3 Series/filament/QIDI UltraPA-CF25 @Qidi X-Max 3 0.8 nozzle.json new file mode 100644 index 0000000..3019ba0 --- /dev/null +++ b/resources/profiles/X 3 Series/filament/QIDI UltraPA-CF25 @Qidi X-Max 3 0.8 nozzle.json @@ -0,0 +1,10 @@ +{ + "type": "filament", + "filament_id": "GFN98", + "setting_id": "GFSN99", + "name": "QIDI UltraPA-CF25 @Qidi X-Max 3 0.8 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "QIDI UltraPA-CF25@X3", + "compatible_printers": ["X-Max 3 0.8 nozzle"] +} diff --git a/resources/profiles/X 3 Series/filament/QIDI UltraPA-CF25 @Qidi X-Plus 3 0.4 nozzle.json b/resources/profiles/X 3 Series/filament/QIDI UltraPA-CF25 @Qidi X-Plus 3 0.4 nozzle.json new file mode 100644 index 0000000..aad7858 --- /dev/null +++ b/resources/profiles/X 3 Series/filament/QIDI UltraPA-CF25 @Qidi X-Plus 3 0.4 nozzle.json @@ -0,0 +1,10 @@ +{ + "type": "filament", + "filament_id": "GFN98", + "setting_id": "GFSN99", + "name": "QIDI UltraPA-CF25 @Qidi X-Plus 3 0.4 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "QIDI UltraPA-CF25@X3", + "compatible_printers": ["X-Plus 3 0.4 nozzle"] +} diff --git a/resources/profiles/X 3 Series/filament/QIDI UltraPA-CF25 @Qidi X-Plus 3 0.6 nozzle.json b/resources/profiles/X 3 Series/filament/QIDI UltraPA-CF25 @Qidi X-Plus 3 0.6 nozzle.json new file mode 100644 index 0000000..2cb5c98 --- /dev/null +++ b/resources/profiles/X 3 Series/filament/QIDI UltraPA-CF25 @Qidi X-Plus 3 0.6 nozzle.json @@ -0,0 +1,10 @@ +{ + "type": "filament", + "filament_id": "GFN98", + "setting_id": "GFSN99", + "name": "QIDI UltraPA-CF25 @Qidi X-Plus 3 0.6 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "QIDI UltraPA-CF25@X3", + "compatible_printers": ["X-Plus 3 0.6 nozzle"] +} diff --git a/resources/profiles/X 3 Series/filament/QIDI UltraPA-CF25 @Qidi X-Plus 3 0.8 nozzle.json b/resources/profiles/X 3 Series/filament/QIDI UltraPA-CF25 @Qidi X-Plus 3 0.8 nozzle.json new file mode 100644 index 0000000..32e849c --- /dev/null +++ b/resources/profiles/X 3 Series/filament/QIDI UltraPA-CF25 @Qidi X-Plus 3 0.8 nozzle.json @@ -0,0 +1,10 @@ +{ + "type": "filament", + "filament_id": "GFN98", + "setting_id": "GFSN99", + "name": "QIDI UltraPA-CF25 @Qidi X-Plus 3 0.8 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "QIDI UltraPA-CF25@X3", + "compatible_printers": ["X-Plus 3 0.8 nozzle"] +} diff --git a/resources/profiles/X 3 Series/filament/QIDI UltraPA-CF25 @Qidi X-Smart 3 0.4 nozzle.json b/resources/profiles/X 3 Series/filament/QIDI UltraPA-CF25 @Qidi X-Smart 3 0.4 nozzle.json new file mode 100644 index 0000000..a52d451 --- /dev/null +++ b/resources/profiles/X 3 Series/filament/QIDI UltraPA-CF25 @Qidi X-Smart 3 0.4 nozzle.json @@ -0,0 +1,12 @@ +{ + "type": "filament", + "filament_id": "GFN98", + "setting_id": "GFSN99", + "name": "QIDI UltraPA-CF25 @Qidi X-Smart 3 0.4 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "QIDI UltraPA-CF25@X3", + "additional_cooling_fan_speed": ["0"], + "additional_cooling_fan_speed_unseal": ["0"], + "compatible_printers": ["X-Smart 3 0.4 nozzle"] +} diff --git a/resources/profiles/X 3 Series/filament/QIDI UltraPA-CF25 @Qidi X-Smart 3 0.6 nozzle.json b/resources/profiles/X 3 Series/filament/QIDI UltraPA-CF25 @Qidi X-Smart 3 0.6 nozzle.json new file mode 100644 index 0000000..84b8397 --- /dev/null +++ b/resources/profiles/X 3 Series/filament/QIDI UltraPA-CF25 @Qidi X-Smart 3 0.6 nozzle.json @@ -0,0 +1,12 @@ +{ + "type": "filament", + "filament_id": "GFN98", + "setting_id": "GFSN99", + "name": "QIDI UltraPA-CF25 @Qidi X-Smart 3 0.6 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "QIDI UltraPA-CF25@X3", + "additional_cooling_fan_speed": ["0"], + "additional_cooling_fan_speed_unseal": ["0"], + "compatible_printers": ["X-Smart 3 0.6 nozzle"] +} diff --git a/resources/profiles/X 3 Series/filament/QIDI UltraPA-CF25 @Qidi X-Smart 3 0.8 nozzle.json b/resources/profiles/X 3 Series/filament/QIDI UltraPA-CF25 @Qidi X-Smart 3 0.8 nozzle.json new file mode 100644 index 0000000..31828fa --- /dev/null +++ b/resources/profiles/X 3 Series/filament/QIDI UltraPA-CF25 @Qidi X-Smart 3 0.8 nozzle.json @@ -0,0 +1,12 @@ +{ + "type": "filament", + "filament_id": "GFN98", + "setting_id": "GFSN99", + "name": "QIDI UltraPA-CF25 @Qidi X-Smart 3 0.8 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "QIDI UltraPA-CF25@X3", + "additional_cooling_fan_speed": ["0"], + "additional_cooling_fan_speed_unseal": ["0"], + "compatible_printers": ["X-Smart 3 0.8 nozzle"] +} diff --git a/resources/profiles/X 3 Series/filament/QIDI UltraPA-CF25.json b/resources/profiles/X 3 Series/filament/QIDI UltraPA-CF25.json new file mode 100644 index 0000000..25b46fb --- /dev/null +++ b/resources/profiles/X 3 Series/filament/QIDI UltraPA-CF25.json @@ -0,0 +1,32 @@ +{ + "type": "filament", + "filament_id": "GFN98", + "setting_id": "GFSN99", + "name": "QIDI UltraPA-CF25@X3", + "from": "system", + "instantiation": "false", + "inherits": "fdm_filament_common", + "additional_cooling_fan_speed_unseal": ["0"], + "additional_cooling_fan_speed": ["0"], + "close_fan_the_first_x_layers": ["3"], + "enable_overhang_bridge_fan": ["1"], + "fan_cooling_layer_time": ["5"], + "fan_max_speed": ["40"], + "fan_min_speed": ["20"], + "filament_density": ["1.23"], + "filament_flow_ratio": ["0.94"], + "filament_max_volumetric_speed": ["8"], + "filament_type": ["UltraPA-CF25"], + "nozzle_temperature_initial_layer": ["300"], + "nozzle_temperature_range_high": ["320"], + "nozzle_temperature_range_low": ["300"], + "nozzle_temperature": ["300"], + "overhang_fan_speed": ["40"], + "overhang_fan_threshold": ["0%"], + "pressure_advance": ["0.015"], + "slow_down_layer_time": ["2"], + "temperature_vitrification": ["230"], + "textured_plate_temp_initial_layer" : ["80"], + "textured_plate_temp" : ["80"], + "compatible_printers": [] +} diff --git a/resources/profiles/X 3 Series/filament/QIDI WOOD Rapido @Qidi X-Max 3 0.4 nozzle.json b/resources/profiles/X 3 Series/filament/QIDI WOOD Rapido @Qidi X-Max 3 0.4 nozzle.json new file mode 100644 index 0000000..a957bfa --- /dev/null +++ b/resources/profiles/X 3 Series/filament/QIDI WOOD Rapido @Qidi X-Max 3 0.4 nozzle.json @@ -0,0 +1,10 @@ +{ + "type": "filament", + "filament_id": "GFL99", + "setting_id": "GFSL99", + "name": "QIDI WOOD Rapido @Qidi X-Max 3 0.4 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "QIDI WOOD Rapido@X3", + "compatible_printers": ["X-Max 3 0.4 nozzle"] +} diff --git a/resources/profiles/X 3 Series/filament/QIDI WOOD Rapido @Qidi X-Max 3 0.6 nozzle.json b/resources/profiles/X 3 Series/filament/QIDI WOOD Rapido @Qidi X-Max 3 0.6 nozzle.json new file mode 100644 index 0000000..1302b46 --- /dev/null +++ b/resources/profiles/X 3 Series/filament/QIDI WOOD Rapido @Qidi X-Max 3 0.6 nozzle.json @@ -0,0 +1,11 @@ +{ + "type": "filament", + "filament_id": "GFL99", + "setting_id": "GFSL99", + "name": "QIDI WOOD Rapido @Qidi X-Max 3 0.6 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "QIDI WOOD Rapido@X3", + "pressure_advance": ["0.02"], + "compatible_printers": ["X-Max 3 0.6 nozzle"] +} diff --git a/resources/profiles/X 3 Series/filament/QIDI WOOD Rapido @Qidi X-Max 3 0.8 nozzle.json b/resources/profiles/X 3 Series/filament/QIDI WOOD Rapido @Qidi X-Max 3 0.8 nozzle.json new file mode 100644 index 0000000..3cfa546 --- /dev/null +++ b/resources/profiles/X 3 Series/filament/QIDI WOOD Rapido @Qidi X-Max 3 0.8 nozzle.json @@ -0,0 +1,11 @@ +{ + "type": "filament", + "filament_id": "GFL99", + "setting_id": "GFSL99", + "name": "QIDI WOOD Rapido @Qidi X-Max 3 0.8 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "QIDI WOOD Rapido@X3", + "pressure_advance": ["0.01"], + "compatible_printers": ["X-Max 3 0.8 nozzle"] +} diff --git a/resources/profiles/X 3 Series/filament/QIDI WOOD Rapido @Qidi X-Plus 3 0.4 nozzle.json b/resources/profiles/X 3 Series/filament/QIDI WOOD Rapido @Qidi X-Plus 3 0.4 nozzle.json new file mode 100644 index 0000000..6cafa63 --- /dev/null +++ b/resources/profiles/X 3 Series/filament/QIDI WOOD Rapido @Qidi X-Plus 3 0.4 nozzle.json @@ -0,0 +1,10 @@ +{ + "type": "filament", + "filament_id": "GFL99", + "setting_id": "GFSL99", + "name": "QIDI WOOD Rapido @Qidi X-Plus 3 0.4 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "QIDI WOOD Rapido@X3", + "compatible_printers": ["X-Plus 3 0.4 nozzle"] +} diff --git a/resources/profiles/X 3 Series/filament/QIDI WOOD Rapido @Qidi X-Plus 3 0.6 nozzle.json b/resources/profiles/X 3 Series/filament/QIDI WOOD Rapido @Qidi X-Plus 3 0.6 nozzle.json new file mode 100644 index 0000000..230ad1c --- /dev/null +++ b/resources/profiles/X 3 Series/filament/QIDI WOOD Rapido @Qidi X-Plus 3 0.6 nozzle.json @@ -0,0 +1,11 @@ +{ + "type": "filament", + "filament_id": "GFL99", + "setting_id": "GFSL99", + "name": "QIDI WOOD Rapido @Qidi X-Plus 3 0.6 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "QIDI WOOD Rapido@X3", + "pressure_advance": ["0.02"], + "compatible_printers": ["X-Plus 3 0.6 nozzle"] +} diff --git a/resources/profiles/X 3 Series/filament/QIDI WOOD Rapido @Qidi X-Plus 3 0.8 nozzle.json b/resources/profiles/X 3 Series/filament/QIDI WOOD Rapido @Qidi X-Plus 3 0.8 nozzle.json new file mode 100644 index 0000000..1de7c24 --- /dev/null +++ b/resources/profiles/X 3 Series/filament/QIDI WOOD Rapido @Qidi X-Plus 3 0.8 nozzle.json @@ -0,0 +1,11 @@ +{ + "type": "filament", + "filament_id": "GFL99", + "setting_id": "GFSL99", + "name": "QIDI WOOD Rapido @Qidi X-Plus 3 0.8 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "QIDI WOOD Rapido@X3", + "pressure_advance": ["0.01"], + "compatible_printers": ["X-Plus 3 0.8 nozzle"] +} diff --git a/resources/profiles/X 3 Series/filament/QIDI WOOD Rapido @Qidi X-Smart 3 0.4 nozzle.json b/resources/profiles/X 3 Series/filament/QIDI WOOD Rapido @Qidi X-Smart 3 0.4 nozzle.json new file mode 100644 index 0000000..c4f5135 --- /dev/null +++ b/resources/profiles/X 3 Series/filament/QIDI WOOD Rapido @Qidi X-Smart 3 0.4 nozzle.json @@ -0,0 +1,14 @@ +{ + "type": "filament", + "filament_id": "GFL99", + "setting_id": "GFSL99", + "name": "QIDI WOOD Rapido @Qidi X-Smart 3 0.4 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "QIDI WOOD Rapido@X3", + "additional_cooling_fan_speed_unseal": ["0"], + "additional_cooling_fan_speed": ["0"], + "filament_max_volumetric_speed": ["20"], + "slow_down_layer_time": ["8"], + "compatible_printers": ["X-Smart 3 0.4 nozzle"] +} diff --git a/resources/profiles/X 3 Series/filament/QIDI WOOD Rapido @Qidi X-Smart 3 0.6 nozzle.json b/resources/profiles/X 3 Series/filament/QIDI WOOD Rapido @Qidi X-Smart 3 0.6 nozzle.json new file mode 100644 index 0000000..c4ca95c --- /dev/null +++ b/resources/profiles/X 3 Series/filament/QIDI WOOD Rapido @Qidi X-Smart 3 0.6 nozzle.json @@ -0,0 +1,14 @@ +{ + "type": "filament", + "filament_id": "GFL99", + "setting_id": "GFSL99", + "name": "QIDI WOOD Rapido @Qidi X-Smart 3 0.6 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "QIDI WOOD Rapido@X3", + "additional_cooling_fan_speed_unseal": ["0"], + "additional_cooling_fan_speed": ["0"], + "pressure_advance": ["0.02"], + "slow_down_layer_time": ["8"], + "compatible_printers": ["X-Smart 3 0.6 nozzle"] +} diff --git a/resources/profiles/X 3 Series/filament/QIDI WOOD Rapido @Qidi X-Smart 3 0.8 nozzle.json b/resources/profiles/X 3 Series/filament/QIDI WOOD Rapido @Qidi X-Smart 3 0.8 nozzle.json new file mode 100644 index 0000000..233569b --- /dev/null +++ b/resources/profiles/X 3 Series/filament/QIDI WOOD Rapido @Qidi X-Smart 3 0.8 nozzle.json @@ -0,0 +1,14 @@ +{ + "type": "filament", + "filament_id": "GFL99", + "setting_id": "GFSL99", + "name": "QIDI WOOD Rapido @Qidi X-Smart 3 0.8 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "QIDI WOOD Rapido@X3", + "additional_cooling_fan_speed_unseal": ["0"], + "additional_cooling_fan_speed": ["0"], + "pressure_advance": ["0.01"], + "slow_down_layer_time": ["8"], + "compatible_printers": ["X-Smart 3 0.8 nozzle"] +} diff --git a/resources/profiles/X 3 Series/filament/QIDI WOOD Rapido.json b/resources/profiles/X 3 Series/filament/QIDI WOOD Rapido.json new file mode 100644 index 0000000..a21cd24 --- /dev/null +++ b/resources/profiles/X 3 Series/filament/QIDI WOOD Rapido.json @@ -0,0 +1,19 @@ +{ + "type": "filament", + "filament_id": "GFL99", + "setting_id": "GFSL99", + "name": "QIDI WOOD Rapido@X3", + "from": "system", + "instantiation": "false", + "inherits": "fdm_filament_common", + "additional_cooling_fan_speed": ["100"], + "filament_density": ["1.23"], + "filament_flow_ratio": ["0.95"], + "filament_max_volumetric_speed": ["16"], + "filament_type": ["PLA"], + "nozzle_temperature_range_high": ["220"], + "nozzle_temperature_range_low": ["190"], + "pressure_advance": ["0.03"], + "temperature_vitrification": ["45"], + "compatible_printers": [] +} diff --git a/resources/profiles/X 4 Series.json b/resources/profiles/X 4 Series.json index b43cd23..6289b5b 100644 --- a/resources/profiles/X 4 Series.json +++ b/resources/profiles/X 4 Series.json @@ -799,6 +799,38 @@ { "name": "QIDI PET-GF @Qidi X-Plus 4 0.8 nozzle", "sub_path": "filament/QIDI PET-GF @Qidi X-Plus 4 0.8 nozzle.json" + }, + { + "name": "QIDI UltraPA-CF25@X4", + "sub_path": "filament/QIDI UltraPA-CF25.json" + }, + { + "name": "QIDI UltraPA-CF25 @Qidi X-Plus 4 0.4 nozzle", + "sub_path": "filament/QIDI UltraPA-CF25 @Qidi X-Plus 4 0.4 nozzle.json" + }, + { + "name": "QIDI UltraPA-CF25 @Qidi X-Plus 4 0.6 nozzle", + "sub_path": "filament/QIDI UltraPA-CF25 @Qidi X-Plus 4 0.6 nozzle.json" + }, + { + "name": "QIDI UltraPA-CF25 @Qidi X-Plus 4 0.8 nozzle", + "sub_path": "filament/QIDI UltraPA-CF25 @Qidi X-Plus 4 0.8 nozzle.json" + }, + { + "name": "QIDI WOOD Rapido@X4", + "sub_path": "filament/QIDI WOOD Rapido.json" + }, + { + "name": "QIDI WOOD Rapido @Qidi X-Plus 4 0.4 nozzle", + "sub_path": "filament/QIDI WOOD Rapido @Qidi X-Plus 4 0.4 nozzle.json" + }, + { + "name": "QIDI WOOD Rapido @Qidi X-Plus 4 0.6 nozzle", + "sub_path": "filament/QIDI WOOD Rapido @Qidi X-Plus 4 0.6 nozzle.json" + }, + { + "name": "QIDI WOOD Rapido @Qidi X-Plus 4 0.8 nozzle", + "sub_path": "filament/QIDI WOOD Rapido @Qidi X-Plus 4 0.8 nozzle.json" } ], "machine_list": [ diff --git a/resources/profiles/X 4 Series/filament/Bambu PETG.json b/resources/profiles/X 4 Series/filament/Bambu PETG.json index bad6579..712915d 100644 --- a/resources/profiles/X 4 Series/filament/Bambu PETG.json +++ b/resources/profiles/X 4 Series/filament/Bambu PETG.json @@ -21,8 +21,10 @@ "nozzle_temperature": ["250"], "overhang_fan_speed": ["90"], "overhang_fan_threshold": ["10%"], - "pressure_advance": ["0.086"], + "pressure_advance": ["0.056"], "slow_down_layer_time": ["8"], + "supertack_plate_temp_initial_layer": ["70"], + "supertack_plate_temp": ["70"], "temperature_vitrification": ["70"], "textured_plate_temp_initial_layer" : ["80"], "textured_plate_temp" : ["80"], diff --git a/resources/profiles/X 4 Series/filament/Bambu PLA.json b/resources/profiles/X 4 Series/filament/Bambu PLA.json index fc70197..5111e87 100644 --- a/resources/profiles/X 4 Series/filament/Bambu PLA.json +++ b/resources/profiles/X 4 Series/filament/Bambu PLA.json @@ -13,6 +13,8 @@ "nozzle_temperature_range_low": ["190"], "nozzle_temperature_initial_layer": ["210"], "nozzle_temperature": ["210"], + "supertack_plate_temp_initial_layer": ["45"], + "supertack_plate_temp": ["45"], "temperature_vitrification": ["45"], "compatible_printers": [] } diff --git a/resources/profiles/X 4 Series/filament/Generic PETG.json b/resources/profiles/X 4 Series/filament/Generic PETG.json index 96bb8f8..8e7d723 100644 --- a/resources/profiles/X 4 Series/filament/Generic PETG.json +++ b/resources/profiles/X 4 Series/filament/Generic PETG.json @@ -22,8 +22,10 @@ "nozzle_temperature": ["250"], "overhang_fan_speed": ["90"], "overhang_fan_threshold": ["10%"], - "pressure_advance": ["0.086"], + "pressure_advance": ["0.056"], "slow_down_layer_time": ["12"], + "supertack_plate_temp_initial_layer": ["70"], + "supertack_plate_temp": ["70"], "temperature_vitrification": ["70"], "textured_plate_temp_initial_layer" : ["80"], "textured_plate_temp" : ["80"], diff --git a/resources/profiles/X 4 Series/filament/Generic PLA Silk.json b/resources/profiles/X 4 Series/filament/Generic PLA Silk.json index e65426e..8dc7502 100644 --- a/resources/profiles/X 4 Series/filament/Generic PLA Silk.json +++ b/resources/profiles/X 4 Series/filament/Generic PLA Silk.json @@ -17,6 +17,8 @@ "nozzle_temperature_range_low": ["190"], "nozzle_temperature": ["220"], "pressure_advance": ["0.032"], + "supertack_plate_temp_initial_layer": ["35"], + "supertack_plate_temp": ["35"], "temperature_vitrification": ["45"], "textured_plate_temp_initial_layer" : ["55"], "textured_plate_temp" : ["55"], diff --git a/resources/profiles/X 4 Series/filament/Generic PLA+.json b/resources/profiles/X 4 Series/filament/Generic PLA+.json index da3e7d2..9abe628 100644 --- a/resources/profiles/X 4 Series/filament/Generic PLA+.json +++ b/resources/profiles/X 4 Series/filament/Generic PLA+.json @@ -15,6 +15,8 @@ "nozzle_temperature_range_high": ["240"], "nozzle_temperature_range_low": ["190"], "nozzle_temperature": ["230"], + "supertack_plate_temp_initial_layer": ["45"], + "supertack_plate_temp": ["45"], "temperature_vitrification": ["45"], "compatible_printers": [] } \ No newline at end of file diff --git a/resources/profiles/X 4 Series/filament/Generic PLA.json b/resources/profiles/X 4 Series/filament/Generic PLA.json index e49d8ff..efd868f 100644 --- a/resources/profiles/X 4 Series/filament/Generic PLA.json +++ b/resources/profiles/X 4 Series/filament/Generic PLA.json @@ -15,6 +15,8 @@ "nozzle_temperature_range_high": ["240"], "nozzle_temperature_range_low": ["190"], "nozzle_temperature": ["220"], + "supertack_plate_temp_initial_layer": ["45"], + "supertack_plate_temp": ["45"], "temperature_vitrification": ["45"], "compatible_printers": [] } \ No newline at end of file diff --git a/resources/profiles/X 4 Series/filament/HATCHBOX PETG.json b/resources/profiles/X 4 Series/filament/HATCHBOX PETG.json index fab7023..9337d23 100644 --- a/resources/profiles/X 4 Series/filament/HATCHBOX PETG.json +++ b/resources/profiles/X 4 Series/filament/HATCHBOX PETG.json @@ -21,8 +21,10 @@ "nozzle_temperature": ["250"], "overhang_fan_speed": ["90"], "overhang_fan_threshold": ["10%"], - "pressure_advance": ["0.086"], + "pressure_advance": ["0.056"], "slow_down_layer_time": ["8"], + "supertack_plate_temp_initial_layer": ["70"], + "supertack_plate_temp": ["70"], "temperature_vitrification": ["70"], "textured_plate_temp_initial_layer" : ["80"], "textured_plate_temp" : ["80"], diff --git a/resources/profiles/X 4 Series/filament/HATCHBOX PLA.json b/resources/profiles/X 4 Series/filament/HATCHBOX PLA.json index 45ee182..3e8171e 100644 --- a/resources/profiles/X 4 Series/filament/HATCHBOX PLA.json +++ b/resources/profiles/X 4 Series/filament/HATCHBOX PLA.json @@ -13,6 +13,8 @@ "nozzle_temperature_range_low": ["190"], "nozzle_temperature_initial_layer": ["210"], "nozzle_temperature": ["210"], + "supertack_plate_temp_initial_layer": ["45"], + "supertack_plate_temp": ["45"], "temperature_vitrification": ["45"], "compatible_printers": [] } diff --git a/resources/profiles/X 4 Series/filament/Overture PLA.json b/resources/profiles/X 4 Series/filament/Overture PLA.json index bccf907..c25c324 100644 --- a/resources/profiles/X 4 Series/filament/Overture PLA.json +++ b/resources/profiles/X 4 Series/filament/Overture PLA.json @@ -17,6 +17,8 @@ "nozzle_temperature_initial_layer": ["210"], "nozzle_temperature": ["210"], "slow_down_layer_time": ["10"], + "supertack_plate_temp_initial_layer": ["45"], + "supertack_plate_temp": ["45"], "temperature_vitrification": ["45"], "compatible_printers": [] } diff --git a/resources/profiles/X 4 Series/filament/PolyLite PLA.json b/resources/profiles/X 4 Series/filament/PolyLite PLA.json index cd99ec9..77ce465 100644 --- a/resources/profiles/X 4 Series/filament/PolyLite PLA.json +++ b/resources/profiles/X 4 Series/filament/PolyLite PLA.json @@ -18,6 +18,8 @@ "nozzle_temperature_initial_layer": ["210"], "nozzle_temperature": ["210"], "slow_down_layer_time": ["10"], + "supertack_plate_temp_initial_layer": ["45"], + "supertack_plate_temp": ["45"], "temperature_vitrification": ["45"], "compatible_printers": [] } diff --git a/resources/profiles/X 4 Series/filament/QIDI PET-CF.json b/resources/profiles/X 4 Series/filament/QIDI PET-CF.json index d11053f..11f96e4 100644 --- a/resources/profiles/X 4 Series/filament/QIDI PET-CF.json +++ b/resources/profiles/X 4 Series/filament/QIDI PET-CF.json @@ -26,5 +26,7 @@ "temperature_vitrification": ["185"], "textured_plate_temp_initial_layer" : ["80"], "textured_plate_temp" : ["80"], + "supertack_plate_temp_initial_layer": ["80"], + "supertack_plate_temp": ["80"], "compatible_printers": [] } diff --git a/resources/profiles/X 4 Series/filament/QIDI PETG Tough @Qidi X-Plus 4 0.4 nozzle.json b/resources/profiles/X 4 Series/filament/QIDI PETG Tough @Qidi X-Plus 4 0.4 nozzle.json index 10206b8..e1022a6 100644 --- a/resources/profiles/X 4 Series/filament/QIDI PETG Tough @Qidi X-Plus 4 0.4 nozzle.json +++ b/resources/profiles/X 4 Series/filament/QIDI PETG Tough @Qidi X-Plus 4 0.4 nozzle.json @@ -6,6 +6,5 @@ "from": "system", "instantiation": "true", "inherits": "QIDI PETG Tough@X4", - "pressure_advance": ["0.056"], "compatible_printers": ["X-Plus 4 0.4 nozzle"] } diff --git a/resources/profiles/X 4 Series/filament/QIDI PETG Tough.json b/resources/profiles/X 4 Series/filament/QIDI PETG Tough.json index 2caac13..4a2dce5 100644 --- a/resources/profiles/X 4 Series/filament/QIDI PETG Tough.json +++ b/resources/profiles/X 4 Series/filament/QIDI PETG Tough.json @@ -20,10 +20,12 @@ "nozzle_temperature": ["250"], "overhang_fan_speed": ["90"], "overhang_fan_threshold": ["10%"], - "pressure_advance": ["0.086"], + "pressure_advance": ["0.056"], "slow_down_layer_time": ["8"], "temperature_vitrification": ["70"], "textured_plate_temp_initial_layer" : ["80"], "textured_plate_temp" : ["80"], + "supertack_plate_temp_initial_layer": ["70"], + "supertack_plate_temp": ["70"], "compatible_printers": [] } diff --git a/resources/profiles/X 4 Series/filament/QIDI PLA Rapido Matte.json b/resources/profiles/X 4 Series/filament/QIDI PLA Rapido Matte.json index ffd7ade..52c6a13 100644 --- a/resources/profiles/X 4 Series/filament/QIDI PLA Rapido Matte.json +++ b/resources/profiles/X 4 Series/filament/QIDI PLA Rapido Matte.json @@ -13,6 +13,8 @@ "nozzle_temperature_range_low": ["190"], "nozzle_temperature_initial_layer": ["210"], "nozzle_temperature": ["210"], + "supertack_plate_temp_initial_layer": ["45"], + "supertack_plate_temp": ["45"], "temperature_vitrification": ["45"], "compatible_printers": [] } diff --git a/resources/profiles/X 4 Series/filament/QIDI PLA Rapido Metal.json b/resources/profiles/X 4 Series/filament/QIDI PLA Rapido Metal.json index 932c431..57fc3d4 100644 --- a/resources/profiles/X 4 Series/filament/QIDI PLA Rapido Metal.json +++ b/resources/profiles/X 4 Series/filament/QIDI PLA Rapido Metal.json @@ -13,6 +13,8 @@ "nozzle_temperature_range_low": ["190"], "nozzle_temperature_initial_layer": ["210"], "nozzle_temperature": ["210"], + "supertack_plate_temp_initial_layer": ["45"], + "supertack_plate_temp": ["45"], "temperature_vitrification": ["45"], "compatible_printers": [] } diff --git a/resources/profiles/X 4 Series/filament/QIDI PLA Rapido Silk.json b/resources/profiles/X 4 Series/filament/QIDI PLA Rapido Silk.json index b88ac65..9bbad68 100644 --- a/resources/profiles/X 4 Series/filament/QIDI PLA Rapido Silk.json +++ b/resources/profiles/X 4 Series/filament/QIDI PLA Rapido Silk.json @@ -14,6 +14,8 @@ "nozzle_temperature_range_low": ["190"], "nozzle_temperature_initial_layer": ["220"], "nozzle_temperature": ["220"], + "supertack_plate_temp_initial_layer": ["0"], + "supertack_plate_temp": ["0"], "textured_plate_temp_initial_layer" : ["55"], "textured_plate_temp" : ["55"], "temperature_vitrification": ["45"], diff --git a/resources/profiles/X 4 Series/filament/QIDI PLA Rapido.json b/resources/profiles/X 4 Series/filament/QIDI PLA Rapido.json index df6e72d..1e13a7f 100644 --- a/resources/profiles/X 4 Series/filament/QIDI PLA Rapido.json +++ b/resources/profiles/X 4 Series/filament/QIDI PLA Rapido.json @@ -12,6 +12,8 @@ "nozzle_temperature_range_low": ["190"], "nozzle_temperature_initial_layer": ["210"], "nozzle_temperature": ["210"], + "supertack_plate_temp_initial_layer": ["45"], + "supertack_plate_temp": ["45"], "temperature_vitrification": ["45"], "compatible_printers": [] } diff --git a/resources/profiles/X 4 Series/filament/QIDI PLA-CF.json b/resources/profiles/X 4 Series/filament/QIDI PLA-CF.json index 7481bbc..9827484 100644 --- a/resources/profiles/X 4 Series/filament/QIDI PLA-CF.json +++ b/resources/profiles/X 4 Series/filament/QIDI PLA-CF.json @@ -19,6 +19,8 @@ "overhang_fan_speed": ["100"], "overhang_fan_threshold": ["50%"], "pressure_advance": ["0.042"], + "supertack_plate_temp_initial_layer": ["50"], + "supertack_plate_temp": ["50"], "temperature_vitrification": ["45"], "compatible_printers": [] } \ No newline at end of file diff --git a/resources/profiles/X 4 Series/filament/QIDI UltraPA-CF25 @Qidi X-Plus 4 0.4 nozzle.json b/resources/profiles/X 4 Series/filament/QIDI UltraPA-CF25 @Qidi X-Plus 4 0.4 nozzle.json new file mode 100644 index 0000000..dbc2ab4 --- /dev/null +++ b/resources/profiles/X 4 Series/filament/QIDI UltraPA-CF25 @Qidi X-Plus 4 0.4 nozzle.json @@ -0,0 +1,10 @@ +{ + "type": "filament", + "filament_id": "GFN98", + "setting_id": "GFSN99", + "name": "QIDI UltraPA-CF25 @Qidi X-Plus 4 0.4 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "QIDI UltraPA-CF25@X4", + "compatible_printers": ["X-Plus 4 0.4 nozzle"] +} diff --git a/resources/profiles/X 4 Series/filament/QIDI UltraPA-CF25 @Qidi X-Plus 4 0.6 nozzle.json b/resources/profiles/X 4 Series/filament/QIDI UltraPA-CF25 @Qidi X-Plus 4 0.6 nozzle.json new file mode 100644 index 0000000..6adfe38 --- /dev/null +++ b/resources/profiles/X 4 Series/filament/QIDI UltraPA-CF25 @Qidi X-Plus 4 0.6 nozzle.json @@ -0,0 +1,11 @@ +{ + "type": "filament", + "filament_id": "GFN98", + "setting_id": "GFSN99", + "name": "QIDI UltraPA-CF25 @Qidi X-Plus 4 0.6 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "QIDI UltraPA-CF25@X4", + "pressure_advance": ["0.022"], + "compatible_printers": ["X-Plus 4 0.6 nozzle"] +} diff --git a/resources/profiles/X 4 Series/filament/QIDI UltraPA-CF25 @Qidi X-Plus 4 0.8 nozzle.json b/resources/profiles/X 4 Series/filament/QIDI UltraPA-CF25 @Qidi X-Plus 4 0.8 nozzle.json new file mode 100644 index 0000000..e38270e --- /dev/null +++ b/resources/profiles/X 4 Series/filament/QIDI UltraPA-CF25 @Qidi X-Plus 4 0.8 nozzle.json @@ -0,0 +1,11 @@ +{ + "type": "filament", + "filament_id": "GFN98", + "setting_id": "GFSN99", + "name": "QIDI UltraPA-CF25 @Qidi X-Plus 4 0.8 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "QIDI UltraPA-CF25@X4", + "pressure_advance": ["0.02"], + "compatible_printers": ["X-Plus 4 0.8 nozzle"] +} diff --git a/resources/profiles/X 4 Series/filament/QIDI UltraPA-CF25.json b/resources/profiles/X 4 Series/filament/QIDI UltraPA-CF25.json new file mode 100644 index 0000000..89ed8a0 --- /dev/null +++ b/resources/profiles/X 4 Series/filament/QIDI UltraPA-CF25.json @@ -0,0 +1,30 @@ +{ + "type": "filament", + "filament_id": "GFN98", + "setting_id": "GFSN99", + "name": "QIDI UltraPA-CF25@X4", + "from": "system", + "instantiation": "false", + "inherits": "fdm_filament_common", + "close_fan_the_first_x_layers": ["3"], + "enable_overhang_bridge_fan": ["1"], + "fan_cooling_layer_time": ["5"], + "fan_max_speed": ["40"], + "fan_min_speed": ["20"], + "filament_density": ["1.23"], + "filament_flow_ratio": ["0.94"], + "filament_max_volumetric_speed": ["8"], + "filament_type": ["UltraPA-CF25"], + "nozzle_temperature_initial_layer": ["300"], + "nozzle_temperature_range_high": ["320"], + "nozzle_temperature_range_low": ["300"], + "nozzle_temperature": ["300"], + "overhang_fan_speed": ["40"], + "overhang_fan_threshold": ["0%"], + "pressure_advance": ["0.026"], + "slow_down_layer_time": ["2"], + "temperature_vitrification": ["230"], + "textured_plate_temp_initial_layer" : ["80"], + "textured_plate_temp" : ["80"], + "compatible_printers": [] +} diff --git a/resources/profiles/X 4 Series/filament/QIDI WOOD Rapido @Qidi X-Plus 4 0.4 nozzle.json b/resources/profiles/X 4 Series/filament/QIDI WOOD Rapido @Qidi X-Plus 4 0.4 nozzle.json new file mode 100644 index 0000000..1265b05 --- /dev/null +++ b/resources/profiles/X 4 Series/filament/QIDI WOOD Rapido @Qidi X-Plus 4 0.4 nozzle.json @@ -0,0 +1,11 @@ +{ + "type": "filament", + "filament_id": "GFL99", + "setting_id": "GFSL99", + "name": "QIDI WOOD Rapido @Qidi X-Plus 4 0.4 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "QIDI WOOD Rapido@X4", + "pressure_advance": ["0.044"], + "compatible_printers": ["X-Plus 4 0.4 nozzle"] +} diff --git a/resources/profiles/X 4 Series/filament/QIDI WOOD Rapido @Qidi X-Plus 4 0.6 nozzle.json b/resources/profiles/X 4 Series/filament/QIDI WOOD Rapido @Qidi X-Plus 4 0.6 nozzle.json new file mode 100644 index 0000000..619148a --- /dev/null +++ b/resources/profiles/X 4 Series/filament/QIDI WOOD Rapido @Qidi X-Plus 4 0.6 nozzle.json @@ -0,0 +1,11 @@ +{ + "type": "filament", + "filament_id": "GFL99", + "setting_id": "GFSL99", + "name": "QIDI WOOD Rapido @Qidi X-Plus 4 0.6 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "QIDI WOOD Rapido@X4", + "pressure_advance": ["0.024"], + "compatible_printers": ["X-Plus 4 0.6 nozzle"] +} diff --git a/resources/profiles/X 4 Series/filament/QIDI WOOD Rapido @Qidi X-Plus 4 0.8 nozzle.json b/resources/profiles/X 4 Series/filament/QIDI WOOD Rapido @Qidi X-Plus 4 0.8 nozzle.json new file mode 100644 index 0000000..caec892 --- /dev/null +++ b/resources/profiles/X 4 Series/filament/QIDI WOOD Rapido @Qidi X-Plus 4 0.8 nozzle.json @@ -0,0 +1,11 @@ +{ + "type": "filament", + "filament_id": "GFL99", + "setting_id": "GFSL99", + "name": "QIDI WOOD Rapido @Qidi X-Plus 4 0.8 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "QIDI WOOD Rapido@X4", + "pressure_advance": ["0.012"], + "compatible_printers": ["X-Plus 4 0.8 nozzle"] +} diff --git a/resources/profiles/X 4 Series/filament/QIDI WOOD Rapido.json b/resources/profiles/X 4 Series/filament/QIDI WOOD Rapido.json new file mode 100644 index 0000000..8732423 --- /dev/null +++ b/resources/profiles/X 4 Series/filament/QIDI WOOD Rapido.json @@ -0,0 +1,23 @@ +{ + "type": "filament", + "filament_id": "GFL99", + "setting_id": "GFSL99", + "name": "QIDI WOOD Rapido@X4", + "from": "system", + "instantiation": "false", + "inherits": "fdm_filament_common", + "additional_cooling_fan_speed": ["100"], + "filament_density": ["1.23"], + "filament_flow_ratio": ["0.95"], + "filament_max_volumetric_speed": ["18"], + "filament_type": ["PLA"], + "nozzle_temperature_range_high": ["220"], + "nozzle_temperature_range_low": ["190"], + "nozzle_temperature_initial_layer": ["210"], + "nozzle_temperature": ["210"], + "pressure_advance": ["0.044"], + "supertack_plate_temp_initial_layer": ["45"], + "supertack_plate_temp": ["45"], + "temperature_vitrification": ["45"], + "compatible_printers": [] +} diff --git a/resources/profiles/X 4 Series/filament/fdm_filament_common.json b/resources/profiles/X 4 Series/filament/fdm_filament_common.json index f6e0bed..5e9a718 100644 --- a/resources/profiles/X 4 Series/filament/fdm_filament_common.json +++ b/resources/profiles/X 4 Series/filament/fdm_filament_common.json @@ -54,6 +54,8 @@ "slow_down_for_layer_cooling": ["1"], "slow_down_layer_time": ["8"], "slow_down_min_speed": ["20"], + "supertack_plate_temp_initial_layer": ["0"], + "supertack_plate_temp": ["0"], "temperature_vitrification": ["100"], "textured_plate_temp_initial_layer" : ["60"], "textured_plate_temp" : ["60"] diff --git a/resources/profiles/X 4 Series/machine/fdm_machine_x_common.json b/resources/profiles/X 4 Series/machine/fdm_machine_x_common.json index 79b81de..8430bc6 100644 --- a/resources/profiles/X 4 Series/machine/fdm_machine_x_common.json +++ b/resources/profiles/X 4 Series/machine/fdm_machine_x_common.json @@ -57,6 +57,7 @@ "single_extruder_multi_material": "1", "support_air_filtration": ["1"], "support_chamber_temp_control": "1", + "support_multi_bed_types": "1", "thumbnail_size": ["272x272/PNG","96x96/PNG"], "wipe": ["1"], "z_hop_types": ["Auto Lift"], diff --git a/resources/web/filament/index.html b/resources/web/filament/index.html index f279d0d..2cd288d 100644 --- a/resources/web/filament/index.html +++ b/resources/web/filament/index.html @@ -258,6 +258,8 @@ + + @@ -289,6 +291,8 @@ PPS-CF TPU 95A-HF UltraPA + UltraPA-CF25 + WOOD Rapido @@ -789,6 +793,8 @@ document.write('/');//pps-cf document.write('/');//tpu document.write(''+ createProgressBar(50,"#0784FF")+ '');//ultra pa + document.write(''+ createProgressBar(50,"#0784FF")+ '');//ultra pa-cf25 + document.write(''+ createProgressBar(25,"#0784FF")+ '');//wood rapido document.write(''); /*Corrosion resistance*/ @@ -816,6 +822,8 @@ document.write('/');//pps-cf document.write('/');//tpu document.write(''+ createProgressBar(50,"#5cb85c")+ '');//ultra pa + document.write('/');//ultra pa-cf25 + document.write('/');//wood rapido document.write(''); /*Creep resistance*/ @@ -843,6 +851,8 @@ document.write('/');//pps-cf document.write('/');//tpu document.write(''+ createProgressBar(50,"#CC6B36")+ '');//ultra pa + document.write('/');//ultra pa-cf25 + document.write('/');//wood rapido document.write(''); /*HDT 0.45*/ @@ -870,6 +880,8 @@ document.write('242.7℃');//pps-cf document.write('/');//tpu document.write('77.8℃');//ultra pa + document.write('96.1℃');//ultra pa-cf25 + document.write('57℃');//wood rapido document.write(''); /*HDT 1.80*/ @@ -897,6 +909,8 @@ document.write('/');//pps-cf document.write('/');//tpu document.write('77.8℃');//ultra pa + document.write('83℃');//ultra pa-cf25 + document.write('/');//wood rapido document.write(''); /*Tensile strength*/ @@ -924,6 +938,8 @@ document.write('60 MPa
'+ createProgressBar(60/150*100,"#CCB70B")+ '');//pps-cf document.write('31.81 MPa
'+ createProgressBar(31.81/150*100,"#CCB70B")+ '');//tpu document.write('86.15 ± 0.56 MPa
'+ createProgressBar(86.15/150*100,"#CCB70B")+ '');//ultra pa + document.write('109.68 ± 1.84 MPa
'+ createProgressBar(109.68/150*100,"#CCB70B")+ '');//ultra pa-cf25 + document.write('26.5 ± 1.5 MPa
'+ createProgressBar(26.5/150*100,"#CCB70B")+ '');//wood rapido document.write(''); /*Tensile modulus*/ @@ -951,6 +967,8 @@ document.write('4800 MPa
'+ createProgressBar(4800/10000*100,"#CC0003")+ '');//pps-cf document.write('/');//tpu document.write('3609.22 ± 153.31 MPa
'+ createProgressBar(3609.22/10000*100,"#CC0003")+ '');//ultra pa + document.write('8996.26 ± 232.21 MPa
'+ createProgressBar(8996.26/10000*100,"#CC0003")+ '');//ultra pa-cf25 + document.write('/');//wood rapido document.write(''); /*Elongation at break*/ @@ -978,6 +996,8 @@ document.write('6%');//pps-cf document.write('471%');//tpu document.write('11.68 ± 3.36%');//ultra pa + document.write('2.18 ± 0.14%');//ultra pa-cf25 + document.write('9 ± 1%');//wood rapido document.write(''); /*Flexural strength*/ @@ -1005,33 +1025,37 @@ document.write('105 MPa
'+ createProgressBar(105/200*100,"#16417C")+ '');//pps-cf document.write('/');//tpu document.write('121.47 ± 3.14 MPa
'+ createProgressBar(121.47/200*100,"#16417C")+ '');//ultra pa + document.write('176.24 ± 3.51 MPa
'+ createProgressBar(176.24/200*100,"#16417C")+ '');//ultra pa-cf25 + document.write('/');//wood rapido document.write(''); /*Flexural modulus*/ document.write(''); document.write(''); document.write('' + getTranslation('Flexural modulus', lang) + ''); - document.write('2850 ± 150 MPa
'+ createProgressBar(2850/8000*100,"#EA3FF7")+ '');//pla - document.write('2200 ± 200 MPa
'+ createProgressBar(2200/8000*100,"#EA3FF7")+ '');//pla matte - document.write('2300 MPa
'+ createProgressBar(2300/8000*100,"#EA3FF7")+ '');//pla metal - document.write('2100 MPa
'+ createProgressBar(2100/8000*100,"#EA3FF7")+ '');//pla silk - document.write('4197.66 ± 279.96 MPa
'+ createProgressBar(4197/8000*100,"#EA3FF7")+ '');//pla cf - document.write('77.5 ± 2.5 MPa
'+ createProgressBar(77.5/8000*100,"#EA3FF7")+ '');//abs - document.write('2400.00 ± 79.69 MPa
'+ createProgressBar(2400/8000*100,"#EA3FF7")+ '');//abs odorless - document.write('3300 MPa
'+ createProgressBar(3300/8000*100,"#EA3FF7")+ '');//abs metal - document.write('3531.71 ± 75.79 MPa
'+ createProgressBar(3531.71/8000*100,"#EA3FF7")+ '');//abs gf - document.write('2399.00 ± 147.00 MPa
'+ createProgressBar(2399/8000*100,"#EA3FF7")+ '');//asa - document.write('457.94 ± 20.84 MPa
'+ createProgressBar(457.94/8000*100,"#EA3FF7")+ '');//asa aero - document.write('4667.43 ± 339.80 MPa
'+ createProgressBar(4667.43/8000*100,"#EA3FF7")+ '');//pa12 cf - document.write('5969.35 ± 145.28 MPa
'+ createProgressBar(5969.33/8000*100,"#EA3FF7")+ '');//paht cf - document.write('4135.14 ± 64.91 MPa
'+ createProgressBar(4135.14/8000*100,"#EA3FF7")+ '');//paht gf - document.write('2504.55 ± 22.88 MPa
'+ createProgressBar(2504.55/8000*100,"#EA3FF7")+ '');//pc abs fr - document.write('5313.21 ± 197.89 MPa
'+ createProgressBar(5313.21/8000*100,"#EA3FF7")+ '');//pet cf - document.write('3650.32 ± 65.81 MPa
'+ createProgressBar(3650.32/8000*100,"#EA3FF7")+ '');//pet gf - document.write('1919 ± 54 MPa
'+ createProgressBar(1919/8000*100,"#EA3FF7")+ '');//petg - document.write('5500 MPa
'+ createProgressBar(5500/8000*100,"#EA3FF7")+ '');//pps-cf + document.write('2850 ± 150 MPa
'+ createProgressBar(2850/10000*100,"#EA3FF7")+ '');//pla + document.write('2200 ± 200 MPa
'+ createProgressBar(2200/10000*100,"#EA3FF7")+ '');//pla matte + document.write('2300 MPa
'+ createProgressBar(2300/10000*100,"#EA3FF7")+ '');//pla metal + document.write('2100 MPa
'+ createProgressBar(2100/10000*100,"#EA3FF7")+ '');//pla silk + document.write('4197.66 ± 279.96 MPa
'+ createProgressBar(4197/10000*100,"#EA3FF7")+ '');//pla cf + document.write('77.5 ± 2.5 MPa
'+ createProgressBar(77.5/10000*100,"#EA3FF7")+ '');//abs + document.write('2400.00 ± 79.69 MPa
'+ createProgressBar(2400/10000*100,"#EA3FF7")+ '');//abs odorless + document.write('3300 MPa
'+ createProgressBar(3300/10000*100,"#EA3FF7")+ '');//abs metal + document.write('3531.71 ± 75.79 MPa
'+ createProgressBar(3531.71/10000*100,"#EA3FF7")+ '');//abs gf + document.write('2399.00 ± 147.00 MPa
'+ createProgressBar(2399/10000*100,"#EA3FF7")+ '');//asa + document.write('457.94 ± 20.84 MPa
'+ createProgressBar(457.94/10000*100,"#EA3FF7")+ '');//asa aero + document.write('4667.43 ± 339.80 MPa
'+ createProgressBar(4667.43/10000*100,"#EA3FF7")+ '');//pa12 cf + document.write('5969.35 ± 145.28 MPa
'+ createProgressBar(5969.33/10000*100,"#EA3FF7")+ '');//paht cf + document.write('4135.14 ± 64.91 MPa
'+ createProgressBar(4135.14/10000*100,"#EA3FF7")+ '');//paht gf + document.write('2504.55 ± 22.88 MPa
'+ createProgressBar(2504.55/10000*100,"#EA3FF7")+ '');//pc abs fr + document.write('5313.21 ± 197.89 MPa
'+ createProgressBar(5313.21/10000*100,"#EA3FF7")+ '');//pet cf + document.write('3650.32 ± 65.81 MPa
'+ createProgressBar(3650.32/10000*100,"#EA3FF7")+ '');//pet gf + document.write('1919 ± 54 MPa
'+ createProgressBar(1919/10000*100,"#EA3FF7")+ '');//petg + document.write('5500 MPa
'+ createProgressBar(5500/10000*100,"#EA3FF7")+ '');//pps-cf document.write('/');//tpu - document.write('3314.03 ± 181.88 MPa
'+ createProgressBar(3314.03/8000*100,"#EA3FF7")+ '');//ultra pa + document.write('3314.03 ± 181.88 MPa
'+ createProgressBar(3314.03/10000*100,"#EA3FF7")+ '');//ultra pa + document.write('8487.47 ± 246.46 MPa
'+ createProgressBar(8487.47/10000*100,"#EA3FF7")+ '');//ultra pa-cf25 + document.write('/');//wood rapido document.write(''); /*Notch impact strength*/ @@ -1059,6 +1083,8 @@ document.write('11KJ/㎡
'+ createProgressBar(11/30*100,"#F77089")+ '');//pps-cf document.write('/');//tpu document.write('5.78 ± 0.30KJ/㎡
'+ createProgressBar(5.78/30*100,"#F77089")+ '');//ultra pa + document.write('12.04 ± 0.94KJ/㎡
'+ createProgressBar(12.04/30*100,"#F77089")+ '');//ultra pa-cf25 + document.write('3.5 ± 0.5KJ/㎡
'+ createProgressBar(3.5/30*100,"#F77089")+ '');//wood rapido document.write(''); /*Drying*/ @@ -1086,6 +1112,8 @@ document.write('' + getTranslation('Need to dry', lang) + '');//pps-cf document.write('' + getTranslation('Need to dry', lang) + '');//tpu document.write('' + getTranslation('Need to dry', lang) + '');//ultra pa + document.write('' + getTranslation('Need to dry', lang) + '');//ultra pa-cf25 + document.write('' + getTranslation('Recommended drying', lang) + '');//wood rapido document.write(''); /*Dry conditions*/ @@ -1113,6 +1141,8 @@ document.write('/');//pps-cf document.write('70-80℃ 4-6h');//tpu document.write('100-120℃ 4-6h');//ultra pa + document.write('80-100℃ 4-6h');//ultra pa-cf25 + document.write('/');//wood rapido document.write(''); /*Suitable hot bed temperature*/ @@ -1140,6 +1170,8 @@ document.write('80-110℃');//pps-cf document.write('20-60℃');//tpu document.write('70-80℃');//ultra pa + document.write('70-80℃');//ultra pa-cf25 + document.write('60℃');//wood rapido document.write(''); /*Sealed box*/ @@ -1167,6 +1199,8 @@ document.write('√');//pps-cf document.write('×');//tpu document.write('×');//ultra pa + document.write('×');//ultra pa-cf25 + document.write('×');//wood rapido document.write(''); /*Print settings*/ @@ -1194,6 +1228,8 @@ document.write('300-370℃');//pps-cf document.write('210-230℃');//tpu document.write('280-300℃');//ultra pa + document.write('300-340℃');//ultra pa-cf25 + document.write('190-220℃');//wood rapido document.write(''); /*Print speed*/ @@ -1221,6 +1257,8 @@ document.write('＜200mm/s');//pps-cf document.write('＜120mm/s');//tpu document.write('＜90mm/s');//ultra pa + document.write('＜120mm/s');//ultra pa-cf25 + document.write('＜200mm/s');//wood rapido document.write(''); /*Post processing*/ @@ -1248,6 +1286,8 @@ document.write('/');//pps-cf document.write('/');//tpu document.write('/');//ultra pa + document.write('80-100℃');//ultra pa-cf25 + document.write('/');//wood rapido document.write('');