mirror of
https://github.com/QIDITECH/QIDIStudio.git
synced 2026-02-04 10:58:41 +03:00
Update translation
This commit is contained in:
QIDI TECH
@@ -13,102 +13,6 @@ msgstr ""
|
||||
"Plural-Forms: nplurals=2; plural=(n==1) ? 0 : 1;\n"
|
||||
"X-Generator: Poedit 3.4.4\n"
|
||||
|
||||
msgid "Don't slow down outer walls"
|
||||
msgstr "Don't slow down outer walls"
|
||||
|
||||
msgid "If enabled, this setting will ensure external perimeters are not slowed down to meet the minimum layer time. "
|
||||
"This is particularly helpful in the below scenarios:\n\n "
|
||||
"1. To avoid changes in shine when printing glossy filaments \n"
|
||||
"2. To avoid changes in external wall speed which may create slight wall artefacts that appear like z banding \n"
|
||||
"3. To avoid printing at speeds which cause VFAs (fine artefacts) on the external walls\n\n"
|
||||
msgstr "If enabled, this setting will ensure external perimeters are not slowed down to meet the minimum layer time. "
|
||||
"This is particularly helpful in the below scenarios:\n\n "
|
||||
"1. To avoid changes in shine when printing glossy filaments \n"
|
||||
"2. To avoid changes in external wall speed which may create slight wall artefacts that appear like z banding \n"
|
||||
"3. To avoid printing at speeds which cause VFAs (fine artefacts) on the external walls\n\n"
|
||||
|
||||
msgid "Click here if you failed to send the print job"
|
||||
msgstr "Click here if you failed to send the print job"
|
||||
|
||||
msgid "Login/Register"
|
||||
msgstr "Login/Register"
|
||||
|
||||
msgid "Local"
|
||||
msgstr "Local"
|
||||
|
||||
msgid "Printer name \"%1%\" already exists."
|
||||
msgstr "Printer name \"%1%\" already exists."
|
||||
|
||||
msgid "Connection to Moonraker works correctly."
|
||||
msgstr "Connection to Moonraker works correctly."
|
||||
|
||||
msgid "The host or IP or URL cannot be empty."
|
||||
msgstr "The host or IP or URL cannot be empty."
|
||||
|
||||
msgid "A device with the same host (IP or URL) already exists, please re-enter."
|
||||
msgstr "A device with the same host (IP or URL) already exists, please re-enter."
|
||||
|
||||
msgid "Machine Name"
|
||||
msgstr "Machine Name"
|
||||
|
||||
msgid "Choice your physical printer preset"
|
||||
msgstr "Choice your physical printer preset"
|
||||
|
||||
msgid "Are you sure you want to delete \"%1%\" printer?"
|
||||
msgstr "Are you sure you want to delete \"%1%\" printer?"
|
||||
|
||||
msgid "Are you sure you want to delete "
|
||||
msgstr "Are you sure you want to delete "
|
||||
|
||||
msgid "printer?"
|
||||
msgstr "printer?"
|
||||
|
||||
msgid "Delete Physical Printer"
|
||||
msgstr "Delete Physical Printer"
|
||||
|
||||
msgid "Unseal Fan speed"
|
||||
msgstr "Unseal Fan speed"
|
||||
|
||||
msgid "Speed of auxiliary part cooling fan under unseal. Auxiliary fan will run at this speed during printing except the first several layers "
|
||||
"which are defined by no cooling layers"
|
||||
msgstr "Speed of auxiliary part cooling fan under unseal. Auxiliary fan will run at this speed during printing except the first several layers "
|
||||
"which are defined by no cooling layers"
|
||||
|
||||
msgid "Resonance avoidance"
|
||||
msgstr "Resonance avoidance"
|
||||
|
||||
msgid "By reducing the speed of the outer wall to avoid the resonance zone of the printer, ringing on the surface of the model are avoided.\n"
|
||||
"Please turn this option off when testing ringing."
|
||||
msgstr "By reducing the speed of the outer wall to avoid the resonance zone of the printer, ringing on the surface of the model are avoided.\n"
|
||||
"Please turn this option off when testing ringing."
|
||||
|
||||
msgid "G-code thumbnails"
|
||||
msgstr "G-code thumbnails"
|
||||
|
||||
msgid "Picture sizes to be stored into a .gcode and .sl1 / .sl1s files, in the following format: \"XxY, XxY, ...\""
|
||||
msgstr "Picture sizes to be stored into a .gcode and .sl1 / .sl1s files, in the following format: \"XxY, XxY, ...\""
|
||||
|
||||
msgid "Format of G-code thumbnails"
|
||||
msgstr "Format of G-code thumbnails"
|
||||
|
||||
msgid "Format of G-code thumbnails: PNG for best quality, JPG for smallest size"
|
||||
msgstr "Format of G-code thumbnails: PNG for best quality, JPG for smallest size"
|
||||
|
||||
msgid "QIDI Studio is based on Bambu Studio by Bambu Lab"
|
||||
msgstr "QIDI Studio is based on Bambu Studio by Bambu Lab"
|
||||
|
||||
msgid "Seal"
|
||||
msgstr "Seal"
|
||||
|
||||
msgid "QIDI Studio is based on Bambu Studio by Bambu Lab."
|
||||
msgstr "QIDI Studio is based on Bambu Studio by Bambu Lab."
|
||||
|
||||
msgid "Support multi bed types"
|
||||
msgstr "Support multi bed types"
|
||||
|
||||
msgid "Switch to Device tab"
|
||||
msgstr "Switch to Device tab"
|
||||
|
||||
msgid "Supports Painting"
|
||||
msgstr "Supports Painting"
|
||||
|
||||
@@ -388,15 +292,18 @@ msgstr ""
|
||||
msgid "World coordinates"
|
||||
msgstr "World coordinates"
|
||||
|
||||
msgid "Reset current rotation to real zeros."
|
||||
msgstr ""
|
||||
|
||||
msgid "°"
|
||||
msgstr "°"
|
||||
|
||||
msgid "Reset current rotation to the value when open the rotation tool."
|
||||
msgstr ""
|
||||
|
||||
msgid "Rotate (absolute)"
|
||||
msgstr ""
|
||||
|
||||
msgid "Reset current rotation to real zeros."
|
||||
msgstr ""
|
||||
|
||||
msgid "Part coordinates"
|
||||
msgstr ""
|
||||
|
||||
@@ -933,6 +840,37 @@ msgstr ""
|
||||
msgid "Warning:text normal is error."
|
||||
msgstr ""
|
||||
|
||||
msgid "Warning:text normal has been reset."
|
||||
msgstr ""
|
||||
|
||||
msgid ""
|
||||
"Warning:Because current text does indeed use surround algorithm,\n"
|
||||
"if continue to edit, text has to regenerated according to new location."
|
||||
msgstr ""
|
||||
|
||||
msgid ""
|
||||
"Warning:old matrix has at least two parameters: mirroring, scaling, and "
|
||||
"rotation. \n"
|
||||
"If you continue editing, it may not be correct. \n"
|
||||
"Please dragging text or cancel using current pose, \n"
|
||||
"save and reedit again."
|
||||
msgstr ""
|
||||
|
||||
msgid ""
|
||||
"Error:Detecting an incorrect mesh id or an unknown error, \n"
|
||||
"regenerating text may result in incorrect outcomes.\n"
|
||||
"Please drag text,save it then reedit it again."
|
||||
msgstr ""
|
||||
|
||||
msgid ""
|
||||
"Warning:Due to functional upgrade, rotation information \n"
|
||||
"cannot be restored. Please drag or modify text,\n"
|
||||
" save it and reedit it will ok."
|
||||
msgstr ""
|
||||
|
||||
msgid "Use opened text pose"
|
||||
msgstr ""
|
||||
|
||||
msgid "Surface"
|
||||
msgstr "Surface"
|
||||
|
||||
@@ -1373,10 +1311,42 @@ msgstr "Open Project"
|
||||
|
||||
msgid ""
|
||||
"The QIDI Studio version is too old to enable cloud service. Please download "
|
||||
"the latest version from QIDI TECH website."
|
||||
"the latest version from QIDI Tech website."
|
||||
msgstr ""
|
||||
"The QIDI Studio version is too old to enable cloud service. Please download "
|
||||
"the latest version from QIDI TECH's website."
|
||||
"the latest version from QIDI Tech's website."
|
||||
|
||||
msgid ""
|
||||
"Your software certificate has been revoked, please update QIDI Studio "
|
||||
"software."
|
||||
msgstr ""
|
||||
|
||||
msgid "Retrieving printer information, please try again later."
|
||||
msgstr ""
|
||||
|
||||
msgid "Please try updating QIDI Studio and then try again."
|
||||
msgstr ""
|
||||
|
||||
msgid ""
|
||||
"The certificate has expired. Please check the time settings or update QIDI "
|
||||
"Studio and try again."
|
||||
msgstr ""
|
||||
|
||||
msgid ""
|
||||
"The certificate is no longer valid and the printing functions are "
|
||||
"unavailable. If you need printing. Please visit the official website at "
|
||||
"https://qidi3d.com/ to download and update."
|
||||
msgstr ""
|
||||
|
||||
msgid ""
|
||||
"Internal error. Please try upgrading the firmware and Studio version. If the "
|
||||
"issue persists, contact customer support."
|
||||
msgstr ""
|
||||
|
||||
msgid ""
|
||||
"Your software is not signed, and some printing functions have been "
|
||||
"restricted. Please use the officially signed software version."
|
||||
msgstr ""
|
||||
|
||||
msgid "Privacy Policy Update"
|
||||
msgstr "Privacy Policy Update"
|
||||
@@ -2057,6 +2027,9 @@ msgstr "Auto Brim"
|
||||
msgid "Auto"
|
||||
msgstr "Auto"
|
||||
|
||||
msgid "Painted"
|
||||
msgstr ""
|
||||
|
||||
msgid "Outer brim only"
|
||||
msgstr "Outer brim only"
|
||||
|
||||
@@ -2636,8 +2609,8 @@ msgstr ""
|
||||
"Slic3r was created by Alessandro Ranellucci with the help of many other "
|
||||
"contributors."
|
||||
|
||||
msgid "QIDI Studio also referenced some ideas from Cura by Ultimaker."
|
||||
msgstr "QIDI Studio also referenced some ideas from Cura by Ultimaker."
|
||||
msgid "Bambu Studio also referenced some ideas from Cura by Ultimaker."
|
||||
msgstr "Bambu Studio also referenced some ideas from Cura by Ultimaker."
|
||||
|
||||
msgid ""
|
||||
"There many parts of the software that come from community contributions, so "
|
||||
@@ -2892,10 +2865,10 @@ msgstr "Insertion update"
|
||||
|
||||
msgid ""
|
||||
"The AMS will automatically read the filament information when inserting a "
|
||||
"new QIDI TECH filament. This takes about 20 seconds."
|
||||
"new QIDI Tech filament. This takes about 20 seconds."
|
||||
msgstr ""
|
||||
"The AMS will automatically read the filament information when inserting a "
|
||||
"new QIDI TECH filament spool. This takes about 20 seconds."
|
||||
"new QIDI Tech filament spool. This takes about 20 seconds."
|
||||
|
||||
msgid ""
|
||||
"Note: if a new filament is inserted during printing, the AMS will not "
|
||||
@@ -4095,6 +4068,12 @@ msgstr "Print all"
|
||||
msgid "Send all"
|
||||
msgstr "Send all"
|
||||
|
||||
msgid "Send to QIDI Farm Manager Client"
|
||||
msgstr ""
|
||||
|
||||
msgid "Send to BFMC"
|
||||
msgstr ""
|
||||
|
||||
msgid "Send to Multi-device"
|
||||
msgstr "Send to Multi-device"
|
||||
|
||||
@@ -5105,6 +5084,9 @@ msgstr ""
|
||||
msgid "Please input a valid value (0.01 < angle deflection < 1.0)"
|
||||
msgstr ""
|
||||
|
||||
msgid "Split compound and compsolid into multiple objects"
|
||||
msgstr ""
|
||||
|
||||
msgid "Number of triangular facets"
|
||||
msgstr ""
|
||||
|
||||
@@ -5154,11 +5136,11 @@ msgid "Newer 3mf version"
|
||||
msgstr "Newer 3mf version"
|
||||
|
||||
msgid ""
|
||||
"The 3mf file version is in Beta and it is newer than the current QIDI Studio "
|
||||
"version."
|
||||
"The 3mf file version is in Beta and it is newer than the current QIDI "
|
||||
"Studio version."
|
||||
msgstr ""
|
||||
"The 3mf file version is in Beta and it is newer than the current QIDI Studio "
|
||||
"version."
|
||||
"The 3mf file version is in Beta and it is newer than the current QIDI "
|
||||
"Studio version."
|
||||
|
||||
msgid "If you would like to try QIDI Studio Beta, you may click to"
|
||||
msgstr "If you would like to try QIDI Studio Beta, you may click to"
|
||||
@@ -5169,7 +5151,8 @@ msgstr "Download Beta Version"
|
||||
msgid "The 3mf file version is newer than the current QIDI Studio version."
|
||||
msgstr "The 3mf file version is newer than the current QIDI Studio version."
|
||||
|
||||
msgid "Update your QIDI Studio could enable all functionality in the 3mf file."
|
||||
msgid ""
|
||||
"Update your QIDI Studio could enable all functionality in the 3mf file."
|
||||
msgstr ""
|
||||
"Update your QIDI Studio could enable all functionality in the 3mf file."
|
||||
|
||||
@@ -5576,8 +5559,8 @@ msgstr ""
|
||||
msgid "Loading file: %s"
|
||||
msgstr "Loading file: %s"
|
||||
|
||||
msgid "The 3mf is not from QIDI TECH, load geometry data only."
|
||||
msgstr "The 3mf is not from QIDI TECH, load geometry data only."
|
||||
msgid "The 3mf is not from QIDI Tech, load geometry data only."
|
||||
msgstr "The 3mf is not from QIDI Tech, load geometry data only."
|
||||
|
||||
msgid "Load 3mf"
|
||||
msgstr "Load 3mf"
|
||||
@@ -5779,6 +5762,12 @@ msgstr "Slicing Plate %d"
|
||||
msgid "Please resolve the slicing errors and publish again."
|
||||
msgstr "Please resolve the slicing errors and publish again."
|
||||
|
||||
msgid "Failed to start QIDI Farm Manager Client."
|
||||
msgstr ""
|
||||
|
||||
msgid "No QIDI Farm Manager Client found."
|
||||
msgstr ""
|
||||
|
||||
msgid ""
|
||||
"Network Plug-in is not detected. Network related features are unavailable."
|
||||
msgstr ""
|
||||
@@ -5915,11 +5904,9 @@ msgstr ""
|
||||
"on the printer."
|
||||
|
||||
msgid ""
|
||||
"Unable to perform boolean operation on model meshes. Only positive parts "
|
||||
"will be kept. You may fix the meshes and try agian."
|
||||
"Unable to perform boolean operation on model meshes. You may fix the meshes "
|
||||
"and try again."
|
||||
msgstr ""
|
||||
"Unable to perform boolean operation on model meshes. Only positive parts "
|
||||
"will be kept. You may fix the meshes and try agian."
|
||||
|
||||
#, boost-format
|
||||
msgid "Reason: part \"%1%\" is empty."
|
||||
@@ -6211,6 +6198,12 @@ msgid ""
|
||||
"reslice."
|
||||
msgstr ""
|
||||
|
||||
msgid "Import a single SVG and split it"
|
||||
msgstr ""
|
||||
|
||||
msgid "Import a single SVG and then split it to several parts."
|
||||
msgstr ""
|
||||
|
||||
msgid "Improve rendering performance by lod"
|
||||
msgstr ""
|
||||
|
||||
@@ -6219,7 +6212,7 @@ msgid ""
|
||||
"models."
|
||||
msgstr ""
|
||||
|
||||
msgid "enable multi instance rendering by opengl"
|
||||
msgid "Enable multi instance rendering by opengl"
|
||||
msgstr ""
|
||||
|
||||
msgid ""
|
||||
@@ -6278,7 +6271,8 @@ msgstr ""
|
||||
msgid "Associate .step/.stp files to QIDI Studio"
|
||||
msgstr "Associate .step/.stp files to QIDI Studio"
|
||||
|
||||
msgid "If enabled, sets QIDI Studio as default application to open .step files"
|
||||
msgid ""
|
||||
"If enabled, sets QIDI Studio as default application to open .step files"
|
||||
msgstr ""
|
||||
"If enabled, sets QIDI Studio as default application to open .step files"
|
||||
|
||||
@@ -6418,14 +6412,14 @@ msgstr "trace"
|
||||
msgid "Host Setting"
|
||||
msgstr "Host Setting"
|
||||
|
||||
msgid "DEV host: api-dev.qidi-lab.com/v1"
|
||||
msgstr "DEV host: api-dev.qidi-lab.com/v1"
|
||||
msgid "DEV host: api-dev.qidi-tech.com/v1"
|
||||
msgstr "DEV host: api-dev.qidi-tech.com/v1"
|
||||
|
||||
msgid "QA host: api-qa.qidi-lab.com/v1"
|
||||
msgstr "QA host: api-qa.qidi-lab.com/v1"
|
||||
msgid "QA host: api-qa.qidi-tech.com/v1"
|
||||
msgstr "QA host: api-qa.qidi-tech.com/v1"
|
||||
|
||||
msgid "PRE host: api-pre.qidi-lab.com/v1"
|
||||
msgstr "PRE host: api-pre.qidi-lab.com/v1"
|
||||
msgid "PRE host: api-pre.qidi-tech.com/v1"
|
||||
msgstr "PRE host: api-pre.qidi-tech.com/v1"
|
||||
|
||||
msgid "Product host"
|
||||
msgstr "Product host"
|
||||
@@ -7014,17 +7008,17 @@ msgid "Terms and Conditions"
|
||||
msgstr "Terms and Conditions"
|
||||
|
||||
msgid ""
|
||||
"Thank you for purchasing a QIDI TECH device.Before using your QIDI TECH "
|
||||
"Thank you for purchasing a QIDI Tech device.Before using your QIDI Tech "
|
||||
"device, please read the termsand conditions.By clicking to agree to use your "
|
||||
"QIDI TECH device, you agree to abide by the Privacy Policy and Terms of "
|
||||
"QIDI Tech device, you agree to abide by the Privacy Policy and Terms of "
|
||||
"Use(collectively, the \"Terms\"). If you do not comply with or agree to the "
|
||||
"QIDI TECH Privacy Policy, please do not use QIDI TECH equipment and services."
|
||||
"QIDI Tech Privacy Policy, please do not use QIDI Tech equipment and services."
|
||||
msgstr ""
|
||||
"Thank you for purchasing a QIDI TECH device. Before using your QIDI TECH "
|
||||
"Thank you for purchasing a QIDI Tech device. Before using your QIDI Tech "
|
||||
"device, please read the terms and conditions. By clicking to agree to use "
|
||||
"your QIDI TECH device, you agree to abide by the Privacy Policy and Terms of "
|
||||
"your QIDI Tech device, you agree to abide by the Privacy Policy and Terms of "
|
||||
"Use (collectively, the \"Terms\"). If you do not comply with or agree to the "
|
||||
"QIDI TECH Privacy Policy, please do not use QIDI TECH equipment and services."
|
||||
"QIDI Tech Privacy Policy, please do not use QIDI Tech equipment and services."
|
||||
|
||||
msgid "and"
|
||||
msgstr "and"
|
||||
@@ -7182,13 +7176,13 @@ msgstr ""
|
||||
msgid ""
|
||||
"When recording timelapse without toolhead, it is recommended to add a "
|
||||
"\"Timelapse Wipe Tower\" \n"
|
||||
"by right-click the empty position of build plate and choose \"Add "
|
||||
"Primitive\"->\"Timelapse Wipe Tower\"."
|
||||
"by right-click the empty position of build plate and choose \"Add Primitive"
|
||||
"\"->\"Timelapse Wipe Tower\"."
|
||||
msgstr ""
|
||||
"When recording timelapse without toolhead, it is recommended to add a "
|
||||
"\"Timelapse Wipe Tower\" \n"
|
||||
"by right-click the empty position of build plate and choose \"Add "
|
||||
"Primitive\"->\"Timelapse Wipe Tower\"."
|
||||
"by right-click the empty position of build plate and choose \"Add Primitive"
|
||||
"\"->\"Timelapse Wipe Tower\"."
|
||||
|
||||
msgid ""
|
||||
"The notes are too large, and may not be synchronized to the cloud. Please "
|
||||
@@ -7322,7 +7316,7 @@ msgstr "Nozzle temperature when printing"
|
||||
|
||||
msgid ""
|
||||
"Bed temperature when cool plate is installed. Value 0 means the filament "
|
||||
"does not support to print on the Bambu Cool Plate SuperTack"
|
||||
"does not support to print on the QIDI Cool Plate SuperTack"
|
||||
msgstr ""
|
||||
|
||||
msgid "Cool Plate"
|
||||
@@ -8424,6 +8418,9 @@ msgstr "Support transition"
|
||||
msgid "Multiple"
|
||||
msgstr "Multiple"
|
||||
|
||||
msgid "Flush"
|
||||
msgstr ""
|
||||
|
||||
#, boost-format
|
||||
msgid "Failed to calculate line width of %1%. Can not get value of \"%2%\" "
|
||||
msgstr "Failed to calculate line width of %1%. Can not get value of \"%2%\" "
|
||||
@@ -8876,6 +8873,13 @@ msgid ""
|
||||
"support to print on the QIDI Cool Plate SuperTack"
|
||||
msgstr ""
|
||||
|
||||
msgid ""
|
||||
"Bed temperature of the initial layer. Value 0 means the filament does not "
|
||||
"support to print on the Cool Plate"
|
||||
msgstr ""
|
||||
"This is the bed temperature of the first layer. A value of 0 means the "
|
||||
"filament does not support printing on the Cool Plate."
|
||||
|
||||
msgid ""
|
||||
"Bed temperature of the initial layer. Value 0 means the filament does not "
|
||||
"support to print on the Engineering Plate"
|
||||
@@ -9103,9 +9107,6 @@ msgstr ""
|
||||
"This controls the generation of the brim at outer and/or inner side of "
|
||||
"models. Auto means the brim width is analysed and calculated automatically."
|
||||
|
||||
msgid "Painted"
|
||||
msgstr ""
|
||||
|
||||
msgid "Brim-object gap"
|
||||
msgstr "Brim-object gap"
|
||||
|
||||
@@ -9471,15 +9472,17 @@ msgstr "Enable pressure advance"
|
||||
|
||||
msgid ""
|
||||
"Enable pressure advance, auto calibration result will be overwriten once "
|
||||
"enabled."
|
||||
"enabled. Useless for QIDI Printer"
|
||||
msgstr ""
|
||||
"Enable pressure advance, auto calibration result will be overwriten once "
|
||||
"enabled."
|
||||
"enabled. Useless for QIDI Printer"
|
||||
|
||||
msgid ""
|
||||
"Pressure advance(Klipper) AKA Linear advance factor(Marlin)."
|
||||
"Pressure advance(Klipper) AKA Linear advance factor(Marlin). Useless for "
|
||||
"QIDI Printer"
|
||||
msgstr ""
|
||||
"Pressure advance(Klipper) AKA Linear advance factor(Marlin)."
|
||||
"Pressure advance(Klipper) AKA Linear advance factor(Marlin). Useless for "
|
||||
"QIDI Printer"
|
||||
|
||||
msgid "Filament notes"
|
||||
msgstr "Filament notes"
|
||||
@@ -10701,7 +10704,7 @@ msgstr ""
|
||||
|
||||
msgid ""
|
||||
"The wipe speed is determined by speed of current extrusion role. e.g if a "
|
||||
"wip action is executed immediately following an outer wall extrusion, the "
|
||||
"wipe action is executed immediately following an outer wall extrusion, the "
|
||||
"speed of the outer wall extrusion will be utilized for the wipe action."
|
||||
msgstr ""
|
||||
|
||||
@@ -11826,21 +11829,21 @@ msgstr ""
|
||||
|
||||
msgid ""
|
||||
"Flow Rate Calibration measures the ratio of expected to actual extrusion "
|
||||
"volumes. The default setting works well in QIDI TECH printers and official "
|
||||
"volumes. The default setting works well in QIDI Tech printers and official "
|
||||
"filaments as they were pre-calibrated and fine-tuned. For a regular "
|
||||
"filament, you usually won't need to perform a Flow Rate Calibration unless "
|
||||
"you still see the listed defects after you have done other calibrations. For "
|
||||
"more details, please check out the wiki article."
|
||||
msgstr ""
|
||||
"Flow Rate Calibration measures the ratio of expected to actual extrusion "
|
||||
"volumes. The default setting works well in QIDI TECH printers and official "
|
||||
"volumes. The default setting works well in QIDI Tech printers and official "
|
||||
"filaments as they were pre-calibrated and fine-tuned. For a regular "
|
||||
"filament, you usually won't need to perform a Flow Rate Calibration unless "
|
||||
"you still see the listed defects after you have done other calibrations. For "
|
||||
"more details, please check out the wiki article."
|
||||
|
||||
msgid ""
|
||||
"Auto Flow Rate Calibration utilizes QIDI TECH's Micro-Lidar technology, "
|
||||
"Auto Flow Rate Calibration utilizes QIDI Tech's Micro-Lidar technology, "
|
||||
"directly measuring the calibration patterns. However, please be advised that "
|
||||
"the efficacy and accuracy of this method may be compromised with specific "
|
||||
"types of materials. Particularly, filaments that are transparent or semi-"
|
||||
@@ -11857,7 +11860,7 @@ msgid ""
|
||||
"can lead to sub-par prints or printer damage. Please make sure to carefully "
|
||||
"read and understand the process before doing it."
|
||||
msgstr ""
|
||||
"Auto Flow Rate Calibration utilizes QIDI TECH's Micro-Lidar technology, "
|
||||
"Auto Flow Rate Calibration utilizes QIDI Tech's Micro-Lidar technology, "
|
||||
"directly measuring the calibration patterns. However, please be advised that "
|
||||
"the efficacy and accuracy of this method may be compromised with specific "
|
||||
"types of materials. Particularly, filaments that are transparent or semi-"
|
||||
@@ -12530,12 +12533,12 @@ msgstr ""
|
||||
"Do you want to rewrite it?"
|
||||
|
||||
msgid ""
|
||||
"We would rename the presets as \"Vendor Type Serial @printer you "
|
||||
"selected\". \n"
|
||||
"We would rename the presets as \"Vendor Type Serial @printer you selected"
|
||||
"\". \n"
|
||||
"To add preset for more prinetrs, Please go to printer selection"
|
||||
msgstr ""
|
||||
"We would rename the presets as \"Vendor Type Serial @printer you "
|
||||
"selected\". \n"
|
||||
"We would rename the presets as \"Vendor Type Serial @printer you selected"
|
||||
"\". \n"
|
||||
"To add preset for more printers; please go to printer selection"
|
||||
|
||||
msgid "Create Printer/Nozzle"
|
||||
@@ -13867,13 +13870,64 @@ msgstr ""
|
||||
"ABS, appropriately increasing the heatbed temperature can reduce the "
|
||||
"probability of warping?"
|
||||
|
||||
#~ msgid ""
|
||||
#~ "The current chamber temperature or the target chamber temperature exceeds "
|
||||
#~ "45\\u2103.In order to avoid extruder clogging,low temperature "
|
||||
#~ "filament(PLA/PETG/TPU) is not allowed to be loaded."
|
||||
#~ msgstr ""
|
||||
#~ "The current chamber temperature or the target chamber temperature exceeds "
|
||||
#~ "45\\u2103. In order to avoid extruder clogging, low temperature filament "
|
||||
#~ "(PLA/PETG/TPU) cannot be loaded."
|
||||
|
||||
#~ msgid ""
|
||||
#~ "Low temperature filament(PLA/PETG/TPU) is loaded in the extruder.In order "
|
||||
#~ "to avoid extruder clogging,it is not allowed to set the chamber "
|
||||
#~ "temperature above 45\\u2103."
|
||||
#~ msgstr ""
|
||||
#~ "Low temperature filament(PLA/PETG/TPU) is loaded in the extruder. In "
|
||||
#~ "order to avoid extruder clogging, setting the chamber temperature above "
|
||||
#~ "45\\u2103 is not allowed."
|
||||
|
||||
#~ msgid ""
|
||||
#~ "When you set the chamber temperature below 40\\u2103, the chamber "
|
||||
#~ "temperature control will not be activated. And the target chamber "
|
||||
#~ "temperature will automatically be set to 0\\u2103."
|
||||
#~ msgstr ""
|
||||
#~ "When you set the chamber temperature below 40\\u2103, the chamber "
|
||||
#~ "temperature control will not be activated. And the target chamber "
|
||||
#~ "temperature will automatically be set to 0\\u2103."
|
||||
|
||||
#~ msgid ""
|
||||
#~ "Please input valid values:\n"
|
||||
#~ "start > 0 \\step >= 0\n"
|
||||
#~ "end > start + step)"
|
||||
#~ msgstr ""
|
||||
#~ "Please input valid values:\n"
|
||||
#~ "start > 0 \\step >= 0\n"
|
||||
#~ "end > start + step)"
|
||||
|
||||
#~ msgid ""
|
||||
#~ "Please input valid values:\n"
|
||||
#~ "start > 10 \\step >= 0\n"
|
||||
#~ "end > start + step)"
|
||||
#~ msgstr ""
|
||||
#~ "Please input valid values:\n"
|
||||
#~ "start > 10 \\step >= 0\n"
|
||||
#~ "end > start + step)"
|
||||
|
||||
#~ msgid ""
|
||||
#~ "Unable to perform boolean operation on model meshes. Only positive parts "
|
||||
#~ "will be kept. You may fix the meshes and try agian."
|
||||
#~ msgstr ""
|
||||
#~ "Unable to perform boolean operation on model meshes. Only positive parts "
|
||||
#~ "will be kept. You may fix the meshes and try agian."
|
||||
|
||||
#~ msgid "We would use Lidar to read the calibration result"
|
||||
#~ msgstr "We would use Lidar to read the calibration result"
|
||||
|
||||
#~ msgid "Are you sure you want to cancel this print?"
|
||||
#~ msgstr "Are you sure you want to cancel this print?"
|
||||
|
||||
#, c-format, boost-format
|
||||
#~ msgid ""
|
||||
#~ "Printing high temperature material(%s material) with %s may cause nozzle "
|
||||
#~ "damage"
|
||||
@@ -14020,13 +14074,6 @@ msgstr ""
|
||||
#~ msgid "IP and Access Code Verified! You may close the window"
|
||||
#~ msgstr "IP and Access Code Verified! You may close the window"
|
||||
|
||||
#~ msgid ""
|
||||
#~ "Bed temperature of the initial layer. Value 0 means the filament does not "
|
||||
#~ "support to print on the Cool Plate"
|
||||
#~ msgstr ""
|
||||
#~ "This is the bed temperature of the first layer. A value of 0 means the "
|
||||
#~ "filament does not support printing on the Cool Plate."
|
||||
|
||||
#~ msgid "This setting specifies the count of walls around support"
|
||||
#~ msgstr "This setting specifies the count of walls around support"
|
||||
|
||||
@@ -14118,54 +14165,9 @@ msgstr ""
|
||||
#~ msgid "Please input a valid value (K in 0~0.3, N in 0.6~2.0)"
|
||||
#~ msgstr "Please input a valid value (K in 0~0.3, N in 0.6~2.0)"
|
||||
|
||||
#~ msgid ""
|
||||
#~ "The current chamber temperature or the target chamber temperature exceeds "
|
||||
#~ "45\\u2103.In order to avoid extruder clogging,low temperature "
|
||||
#~ "filament(PLA/PETG/TPU) is not allowed to be loaded."
|
||||
#~ msgstr ""
|
||||
#~ "The current chamber temperature or the target chamber temperature exceeds "
|
||||
#~ "45\\u2103. In order to avoid extruder clogging, low temperature filament "
|
||||
#~ "(PLA/PETG/TPU) cannot be loaded."
|
||||
|
||||
#~ msgid ""
|
||||
#~ "Low temperature filament(PLA/PETG/TPU) is loaded in the extruder.In order "
|
||||
#~ "to avoid extruder clogging,it is not allowed to set the chamber "
|
||||
#~ "temperature above 45\\u2103."
|
||||
#~ msgstr ""
|
||||
#~ "Low temperature filament(PLA/PETG/TPU) is loaded in the extruder. In "
|
||||
#~ "order to avoid extruder clogging, setting the chamber temperature above "
|
||||
#~ "45\\u2103 is not allowed."
|
||||
|
||||
#~ msgid ""
|
||||
#~ "When you set the chamber temperature below 40\\u2103, the chamber "
|
||||
#~ "temperature control will not be activated. And the target chamber "
|
||||
#~ "temperature will automatically be set to 0\\u2103."
|
||||
#~ msgstr ""
|
||||
#~ "When you set the chamber temperature below 40\\u2103, the chamber "
|
||||
#~ "temperature control will not be activated. And the target chamber "
|
||||
#~ "temperature will automatically be set to 0\\u2103."
|
||||
|
||||
#~ msgid "Printer local connection failed, please try again."
|
||||
#~ msgstr "Printer local connection failed, please try again."
|
||||
|
||||
#~ msgid ""
|
||||
#~ "Please input valid values:\n"
|
||||
#~ "start > 0 \\step >= 0\n"
|
||||
#~ "end > start + step)"
|
||||
#~ msgstr ""
|
||||
#~ "Please input valid values:\n"
|
||||
#~ "start > 0 \\step >= 0\n"
|
||||
#~ "end > start + step)"
|
||||
|
||||
#~ msgid ""
|
||||
#~ "Please input valid values:\n"
|
||||
#~ "start > 10 \\step >= 0\n"
|
||||
#~ "end > start + step)"
|
||||
#~ msgstr ""
|
||||
#~ "Please input valid values:\n"
|
||||
#~ "start > 10 \\step >= 0\n"
|
||||
#~ "end > start + step)"
|
||||
|
||||
#~ msgid ""
|
||||
#~ "\n"
|
||||
#~ "%1% is too close to exclusion area, there will be collisions when "
|
||||
@@ -16105,19 +16107,19 @@ msgstr ""
|
||||
#~ msgstr "Temperature of vitrification"
|
||||
|
||||
#~ msgid ""
|
||||
#~ "Thank you for purchasing a QIDI TECH device.Before using your QIDI TECH "
|
||||
#~ "Thank you for purchasing a QIDI Tech device.Before using your QIDI Tech "
|
||||
#~ "device, please read the termsand conditions.By clicking to agree to use "
|
||||
#~ "your QIDI TECH device, you agree to abide by the Privacy Policyand Terms "
|
||||
#~ "your QIDI Tech device, you agree to abide by the Privacy Policyand Terms "
|
||||
#~ "of Use(collectively, the \"Terms\"). If you do not comply with or agree "
|
||||
#~ "to the QIDI Tech Privacy Policy, please do not use QIDI Tech equipment "
|
||||
#~ "and services."
|
||||
#~ msgstr ""
|
||||
#~ "Thank you for purchasing a QIDI TECH device.Before using your QIDI TECH "
|
||||
#~ "Thank you for purchasing a QIDI Tech device.Before using your QIDI Tech "
|
||||
#~ "device, please read the termsand conditions.By clicking to agree to use "
|
||||
#~ "your QIDI TECH device, you agree to abide by the Privacy Policyand Terms "
|
||||
#~ "your QIDI Tech device, you agree to abide by the Privacy Policyand Terms "
|
||||
#~ "of Use(collectively, the \"Terms\"). If you do not comply with or agree "
|
||||
#~ "to the QIDI TECH Privacy Policy, please do not use QIDI TECH equipment and "
|
||||
#~ "services."
|
||||
#~ "to the QIDI Tech Privacy Policy, please do not use QIDI Tech equipment "
|
||||
#~ "and services."
|
||||
|
||||
#~ msgid "The %s filament is too soft to be used with the AMS"
|
||||
#~ msgstr "The %s filament is too soft to be used with the AMS"
|
||||
@@ -16153,8 +16155,8 @@ msgstr ""
|
||||
#~ msgid "The 3mf is not compatible, load geometry data only!"
|
||||
#~ msgstr "The 3mf is not compatible, loading geometry data only!"
|
||||
|
||||
# ~ msgid "The 3mf is not from QIDI TECH, load geometry data only."
|
||||
# ~ msgstr "The 3mf is not from QIDI TECH, loading geometry data only."
|
||||
#~ msgid "The 3mf is not from QIDI lab, load geometry data only."
|
||||
#~ msgstr "The 3mf is not from QIDI lab, loading geometry data only."
|
||||
|
||||
#~ msgid "The Config is not compatible and can not be loaded."
|
||||
#~ msgstr "The configuration is not compatible and cannot be loaded!"
|
||||
@@ -16828,11 +16830,10 @@ msgstr ""
|
||||
#~ msgid "⌥+Left mouse button"
|
||||
#~ msgstr "⌥+Left mouse button"
|
||||
|
||||
#QIDIStudio
|
||||
msgid "The Seal button is primarily used to control the auxiliary component cooling fan to balance the chamber temperature."
|
||||
msgstr "The Seal button is primarily used to control the auxiliary component cooling fan to balance the chamber temperature."
|
||||
|
||||
|
||||
|
||||
msgid "Clean the Webview Cache"
|
||||
msgstr "Clean the Webview Cache"
|
||||
|
||||
@@ -16845,4 +16846,100 @@ msgid "Learn more"
|
||||
msgstr "Learn more"
|
||||
|
||||
msgid "The path is not exists!"
|
||||
msgstr "The path is not exists!"
|
||||
msgstr "The path is not exists!"
|
||||
|
||||
msgid "Don't slow down outer walls"
|
||||
msgstr "Don't slow down outer walls"
|
||||
|
||||
msgid "If enabled, this setting will ensure external perimeters are not slowed down to meet the minimum layer time. "
|
||||
"This is particularly helpful in the below scenarios:\n\n "
|
||||
"1. To avoid changes in shine when printing glossy filaments \n"
|
||||
"2. To avoid changes in external wall speed which may create slight wall artefacts that appear like z banding \n"
|
||||
"3. To avoid printing at speeds which cause VFAs (fine artefacts) on the external walls\n\n"
|
||||
msgstr "If enabled, this setting will ensure external perimeters are not slowed down to meet the minimum layer time. "
|
||||
"This is particularly helpful in the below scenarios:\n\n "
|
||||
"1. To avoid changes in shine when printing glossy filaments \n"
|
||||
"2. To avoid changes in external wall speed which may create slight wall artefacts that appear like z banding \n"
|
||||
"3. To avoid printing at speeds which cause VFAs (fine artefacts) on the external walls\n\n"
|
||||
|
||||
msgid "Click here if you failed to send the print job"
|
||||
msgstr "Click here if you failed to send the print job"
|
||||
|
||||
msgid "Login/Register"
|
||||
msgstr "Login/Register"
|
||||
|
||||
msgid "Local"
|
||||
msgstr "Local"
|
||||
|
||||
msgid "Printer name \"%1%\" already exists."
|
||||
msgstr "Printer name \"%1%\" already exists."
|
||||
|
||||
msgid "Connection to Moonraker works correctly."
|
||||
msgstr "Connection to Moonraker works correctly."
|
||||
|
||||
msgid "The host or IP or URL cannot be empty."
|
||||
msgstr "The host or IP or URL cannot be empty."
|
||||
|
||||
msgid "A device with the same host (IP or URL) already exists, please re-enter."
|
||||
msgstr "A device with the same host (IP or URL) already exists, please re-enter."
|
||||
|
||||
msgid "Machine Name"
|
||||
msgstr "Machine Name"
|
||||
|
||||
msgid "Choice your physical printer preset"
|
||||
msgstr "Choice your physical printer preset"
|
||||
|
||||
msgid "Are you sure you want to delete \"%1%\" printer?"
|
||||
msgstr "Are you sure you want to delete \"%1%\" printer?"
|
||||
|
||||
msgid "Are you sure you want to delete "
|
||||
msgstr "Are you sure you want to delete "
|
||||
|
||||
msgid "printer?"
|
||||
msgstr "printer?"
|
||||
|
||||
msgid "Delete Physical Printer"
|
||||
msgstr "Delete Physical Printer"
|
||||
|
||||
msgid "Unseal Fan speed"
|
||||
msgstr "Unseal Fan speed"
|
||||
|
||||
msgid "Speed of auxiliary part cooling fan under unseal. Auxiliary fan will run at this speed during printing except the first several layers "
|
||||
"which are defined by no cooling layers"
|
||||
msgstr "Speed of auxiliary part cooling fan under unseal. Auxiliary fan will run at this speed during printing except the first several layers "
|
||||
"which are defined by no cooling layers"
|
||||
|
||||
msgid "Resonance avoidance"
|
||||
msgstr "Resonance avoidance"
|
||||
|
||||
msgid "By reducing the speed of the outer wall to avoid the resonance zone of the printer, ringing on the surface of the model are avoided.\n"
|
||||
"Please turn this option off when testing ringing."
|
||||
msgstr "By reducing the speed of the outer wall to avoid the resonance zone of the printer, ringing on the surface of the model are avoided.\n"
|
||||
"Please turn this option off when testing ringing."
|
||||
|
||||
msgid "G-code thumbnails"
|
||||
msgstr "G-code thumbnails"
|
||||
|
||||
msgid "Picture sizes to be stored into a .gcode and .sl1 / .sl1s files, in the following format: \"XxY, XxY, ...\""
|
||||
msgstr "Picture sizes to be stored into a .gcode and .sl1 / .sl1s files, in the following format: \"XxY, XxY, ...\""
|
||||
|
||||
msgid "Format of G-code thumbnails"
|
||||
msgstr "Format of G-code thumbnails"
|
||||
|
||||
msgid "Format of G-code thumbnails: PNG for best quality, JPG for smallest size"
|
||||
msgstr "Format of G-code thumbnails: PNG for best quality, JPG for smallest size"
|
||||
|
||||
msgid "QIDI Studio is based on Bambu Studio by Bambu Lab"
|
||||
msgstr "QIDI Studio is based on Bambu Studio by Bambu Lab"
|
||||
|
||||
msgid "Seal"
|
||||
msgstr "Seal"
|
||||
|
||||
msgid "QIDI Studio is based on Bambu Studio by Bambu Lab."
|
||||
msgstr "QIDI Studio is based on Bambu Studio by Bambu Lab."
|
||||
|
||||
msgid "Support multi bed types"
|
||||
msgstr "Support multi bed types"
|
||||
|
||||
msgid "Switch to Device tab"
|
||||
msgstr "Switch to Device tab"
|
||||
Reference in New Issue
Block a user