Merge branch 'main' of https://github.com/QIDITECH/QIDISlicer

resources/profiles/QIDITechnology.idx

@@ -1,3 +1,4 @@
+min_slic3r_version = 1.0.1
+1.0.1 Optimize parameters
 min_slic3r_version = 1.0.0
-1.0.1 Initial
 1.0.0 Initial

resources/profiles/QIDITechnology.ini

@@ -5,7 +5,7 @@
 name = QIDI Technology
 # Configuration version of this file. Config file will only be installed, if the config_version differs.
 # This means, the server may force the PrusaSlicer configuration to be downgraded.
-config_version = 1.0.0
+config_version = 1.0.1
 # Where to get the updates from?
 config_update_url = https://github.com/QIDITECH/QIDISlicer/releases/download/QIDITechnology/
 changelog_url = https://qidi3d.com/pages/software-firmware
@@ -268,6 +268,7 @@ solid_infill_speed = 230
 
 # Common filament preset
 [filament:*common*]
+advance_pressure = 0.032
 bed_temperature = 60
 bridge_fan_speed = 100
 compatible_printers = 
@@ -276,9 +277,11 @@ compatible_prints =
 compatible_prints_condition = 
 cooling = 1
 disable_fan_first_layers = 1
-enable_dynamic_fan_speeds = 0
+enable_advance_pressure = 1
 enable_auxiliary_fan = 100
-end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\nM106 P3 S0"
+enable_dynamic_fan_speeds = 0
+enable_volume_fan = 100
+end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
 extrusion_multiplier = 0.98
 fan_always_on = 1
 fan_below_layer_time = 60
@@ -330,7 +333,8 @@ overhang_fan_speed_1 = 0
 overhang_fan_speed_2 = 0
 overhang_fan_speed_3 = 0
 slowdown_below_layer_time = 5
-start_filament_gcode = "; Filament gcode\nM106 P3 S255"
+smooth_time = 0.03
+start_filament_gcode = "; Filament gcode\n"
 temperature = 220
 volume_temperature = 0
 
@@ -339,6 +343,7 @@ volume_temperature = 0
 inherits = *common*
 bed_temperature = 100
 enable_auxiliary_fan = 0
+enable_volume_fan = 0
 extrusion_multiplier = 0.95
 filament_colour = #FFC800
 filament_density = 1.02
@@ -348,7 +353,6 @@ first_layer_bed_temperature = 100
 first_layer_temperature = 270
 max_fan_speed = 60
 min_fan_speed = 60
-start_filament_gcode = "; Filament gcode\nM106 P3 S0"
 temperature = 270
 volume_temperature = 55
 
@@ -356,6 +360,7 @@ volume_temperature = 55
 inherits = *common*
 bed_temperature = 100
 enable_auxiliary_fan = 0
+enable_volume_fan = 0
 extrusion_multiplier = 0.95
 filament_colour = #282828
 filament_density = 1.15
@@ -365,7 +370,6 @@ first_layer_bed_temperature = 100
 first_layer_temperature = 270
 max_fan_speed = 20
 min_fan_speed = 20
-start_filament_gcode = "; Filament gcode\nM106 P3 S0"
 temperature = 270
 volume_temperature = 55
 
@@ -458,6 +462,7 @@ temperature = 280
 inherits = *common*
 bed_temperature = 100
 enable_auxiliary_fan = 0
+enable_volume_fan = 0
 extrusion_multiplier = 0.95
 filament_colour = #FFFF00
 filament_density = 1.04
@@ -468,7 +473,6 @@ first_layer_bed_temperature = 100
 first_layer_temperature = 260
 max_fan_speed = 60
 min_fan_speed = 60
-start_filament_gcode = "; Filament gcode\nM106 P3 S0"
 temperature = 260
 
 [filament:*Generic PETG*]
@@ -500,7 +504,7 @@ extrusion_multiplier = 1
 filament_colour = #8000FF
 filament_density = 1.21
 filament_max_volumetric_speed = 3.2
-filament_type = TPU 95A
+filament_type = TPU
 filament_vendor = Generic
 first_layer_temperature = 230
 temperature = 230
@@ -617,35 +621,46 @@ compatible_printers_condition = printer_model=="X-Plus 3"
 [filament:QIDI ABS Rapido @X-smart 3]
 inherits = *QIDI ABS Rapido*
 compatible_printers_condition = printer_model=="X-smart 3"
+filament_max_volumetric_speed = 20
 
 [filament:QIDI PETG-Tough @X-smart 3]
 inherits = *QIDI PETG-Tough*
 compatible_printers_condition = printer_model=="X-smart 3"
+filament_max_volumetric_speed = 13
 
 [filament:QIDI PLA Rapido @X-smart 3]
 inherits = *QIDI PLA Rapido*
 compatible_printers_condition = printer_model=="X-smart 3"
+filament_max_volumetric_speed = 19
+slowdown_below_layer_time = 8
 
 [filament:QIDI PLA Rapido Matte @X-smart 3]
 inherits = *QIDI PLA Rapido Matte*
 compatible_printers_condition = printer_model=="X-smart 3"
+filament_max_volumetric_speed = 20
+slowdown_below_layer_time = 8
 
 # X-smart 3 Generic filament preset
 [filament:Generic ABS @X-smart 3]
 inherits = *Generic ABS*
 compatible_printers_condition = printer_model=="X-smart 3"
+filament_max_volumetric_speed = 14
 
 [filament:Generic PETG @X-smart 3]
 inherits = *Generic PETG*
 compatible_printers_condition = printer_model=="X-smart 3"
+filament_max_volumetric_speed = 8
 
 [filament:Generic PLA @X-smart 3]
 inherits = *Generic PLA*
 compatible_printers_condition = printer_model=="X-smart 3"
+filament_max_volumetric_speed = 10
+slowdown_below_layer_time = 8
 
 [filament:Generic TPU 95A @X-smart 3]
 inherits = *Generic TPU 95A*
 compatible_printers_condition = printer_model=="X-smart 3"
+slowdown_below_layer_time = 8
 
 # Common printer preset
 [printer:*common*]

src/slic3r/GUI/Plater.cpp

@@ -3466,6 +3466,30 @@ void Plater::priv::export_gcode(fs::path output_path, bool output_path_on_remova
     // If the SLA processing of just a single object's supports is running, restart slicing for the whole object.
     this->background_process.set_task(PrintBase::TaskParams());
     this->restart_background_process(priv::UPDATE_BACKGROUND_PROCESS_FORCE_EXPORT);
+
+    //Y6 PrintHint
+    std::string filament_type;
+    bool ShowPrintHint = false;
+    const PrintStatistics& ps = this->fff_print.print_statistics();
+    const auto& extruders_filaments = wxGetApp().preset_bundle->extruders_filaments;
+    std::list<std::string> FilamentsHintList = {"PETG", "PLA", "TPU"};
+
+    for (const auto& [filament_id, filament_vol] : ps.filament_stats) {
+        assert(filament_id < extruders_filaments.size());
+        if (const Preset* preset = extruders_filaments[filament_id].get_selected_preset()) {
+            filament_type = preset->config.opt_string("filament_type", filament_id);
+            if (std::find(FilamentsHintList.begin(), FilamentsHintList.end(), filament_type) != FilamentsHintList.end()) {
+                ShowPrintHint = true;
+                break;
+            }
+        }
+    }
+
+    if (ShowPrintHint) {
+        std::string message;
+        message = _u8L("Opening the front door and top cover before printing can improve heat dissipation, obtain better print quality, and prevent extruder blockage.");
+        notification_manager->push_notification(message);
+    }
 }
 
 unsigned int Plater::priv::update_restart_background_process(bool force_update_scene, bool force_update_preview)