klipper update

test/klippy/dual_carriage.cfg

@@ -0,0 +1,125 @@
+# Test config with dual carriage and multiple extruders
+[stepper_x]
+step_pin: PF0
+dir_pin: PF1
+enable_pin: !PD7
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^PE5
+position_endstop: 0
+position_max: 200
+homing_speed: 50
+
+[dual_carriage]
+axis: x
+step_pin: PH1
+dir_pin: PH0
+enable_pin: !PA1
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^PE4
+position_endstop: 200
+position_max: 200
+homing_speed: 50
+
+[stepper_y]
+step_pin: PF6
+dir_pin: !PF7
+enable_pin: !PF2
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^PJ1
+position_endstop: 0
+position_max: 200
+homing_speed: 50
+
+[stepper_z]
+step_pin: PL3
+dir_pin: PL1
+enable_pin: !PK0
+microsteps: 16
+rotation_distance: 8
+endstop_pin: ^PD3
+position_endstop: 0.5
+position_max: 200
+
+[extruder]
+step_pin: PA4
+dir_pin: PA6
+enable_pin: !PA2
+microsteps: 16
+rotation_distance: 33.5
+nozzle_diameter: 0.400
+filament_diameter: 1.750
+heater_pin: PB4
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: PK5
+control: pid
+pid_Kp: 22.2
+pid_Ki: 1.08
+pid_Kd: 114
+min_temp: 0
+max_temp: 250
+
+[gcode_macro PARK_extruder0]
+gcode:
+    G90
+    G1 X0
+
+[gcode_macro T0]
+gcode:
+    PARK_{printer.toolhead.extruder}
+    ACTIVATE_EXTRUDER EXTRUDER=extruder
+    SET_DUAL_CARRIAGE CARRIAGE=0
+
+[extruder1]
+step_pin: PC1
+dir_pin: PC3
+enable_pin: !PC7
+microsteps: 16
+rotation_distance: 33.5
+nozzle_diameter: 0.400
+filament_diameter: 1.750
+heater_pin: PB5
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: PK7
+control: pid
+pid_Kp: 22.2
+pid_Ki: 1.08
+pid_Kd: 114
+min_temp: 0
+max_temp: 250
+
+[gcode_macro PARK_extruder1]
+gcode:
+    SET_SERVO SERVO=my_servo angle=100
+    G90
+    G1 X200
+
+[gcode_macro T1]
+gcode:
+    PARK_{printer.toolhead.extruder}
+    SET_SERVO SERVO=my_servo angle=50
+    ACTIVATE_EXTRUDER EXTRUDER=extruder1
+    SET_DUAL_CARRIAGE CARRIAGE=1
+
+[servo my_servo]
+pin: PH4
+
+[heater_bed]
+heater_pin: PH5
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: PK6
+control: watermark
+min_temp: 0
+max_temp: 130
+
+[mcu]
+serial: /dev/ttyACM0
+
+[printer]
+kinematics: cartesian
+max_velocity: 300
+max_accel: 3000
+max_z_velocity: 5
+max_z_accel: 100