klipper update

lib/stm32f1/include/stm32f1xx.h

@@ -0,0 +1,220 @@
+/**
+  ******************************************************************************
+  * @file    stm32f1xx.h
+  * @author  MCD Application Team
+  * @brief   CMSIS STM32F1xx Device Peripheral Access Layer Header File. 
+  *
+  *          The file is the unique include file that the application programmer
+  *          is using in the C source code, usually in main.c. This file contains:
+  *            - Configuration section that allows to select:
+  *              - The STM32F1xx device used in the target application
+  *              - To use or not the peripheral<61>s drivers in application code(i.e. 
+  *                code will be based on direct access to peripheral<61>s registers 
+  *                rather than drivers API), this option is controlled by 
+  *                "#define USE_HAL_DRIVER"
+  *  
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/** @addtogroup CMSIS
+  * @{
+  */
+
+/** @addtogroup stm32f1xx
+  * @{
+  */
+    
+#ifndef __STM32F1XX_H
+#define __STM32F1XX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif /* __cplusplus */
+  
+/** @addtogroup Library_configuration_section
+  * @{
+  */
+
+/**
+  * @brief STM32 Family
+  */
+#if !defined (STM32F1)
+#define STM32F1
+#endif /* STM32F1 */
+
+/* Uncomment the line below according to the target STM32L device used in your 
+   application 
+  */
+
+#if !defined (STM32F100xB) && !defined (STM32F100xE) && !defined (STM32F101x6) && \
+    !defined (STM32F101xB) && !defined (STM32F101xE) && !defined (STM32F101xG) && !defined (STM32F102x6) && !defined (STM32F102xB) && !defined (STM32F103x6) && \
+    !defined (STM32F103xB) && !defined (STM32F103xE) && !defined (STM32F103xG) && !defined (STM32F105xC) && !defined (STM32F107xC)
+  /* #define STM32F100xB  */   /*!< STM32F100C4, STM32F100R4, STM32F100C6, STM32F100R6, STM32F100C8, STM32F100R8, STM32F100V8, STM32F100CB, STM32F100RB and STM32F100VB */
+  /* #define STM32F100xE */    /*!< STM32F100RC, STM32F100VC, STM32F100ZC, STM32F100RD, STM32F100VD, STM32F100ZD, STM32F100RE, STM32F100VE and STM32F100ZE */
+  /* #define STM32F101x6  */   /*!< STM32F101C4, STM32F101R4, STM32F101T4, STM32F101C6, STM32F101R6 and STM32F101T6 Devices */
+  /* #define STM32F101xB  */   /*!< STM32F101C8, STM32F101R8, STM32F101T8, STM32F101V8, STM32F101CB, STM32F101RB, STM32F101TB and STM32F101VB */
+  /* #define STM32F101xE */    /*!< STM32F101RC, STM32F101VC, STM32F101ZC, STM32F101RD, STM32F101VD, STM32F101ZD, STM32F101RE, STM32F101VE and STM32F101ZE */ 
+  /* #define STM32F101xG  */   /*!< STM32F101RF, STM32F101VF, STM32F101ZF, STM32F101RG, STM32F101VG and STM32F101ZG */
+  /* #define STM32F102x6 */    /*!< STM32F102C4, STM32F102R4, STM32F102C6 and STM32F102R6 */
+  /* #define STM32F102xB  */   /*!< STM32F102C8, STM32F102R8, STM32F102CB and STM32F102RB */
+  /* #define STM32F103x6  */   /*!< STM32F103C4, STM32F103R4, STM32F103T4, STM32F103C6, STM32F103R6 and STM32F103T6 */
+  /* #define STM32F103xB  */   /*!< STM32F103C8, STM32F103R8, STM32F103T8, STM32F103V8, STM32F103CB, STM32F103RB, STM32F103TB and STM32F103VB */
+  /* #define STM32F103xE */    /*!< STM32F103RC, STM32F103VC, STM32F103ZC, STM32F103RD, STM32F103VD, STM32F103ZD, STM32F103RE, STM32F103VE and STM32F103ZE */
+  /* #define STM32F103xG  */   /*!< STM32F103RF, STM32F103VF, STM32F103ZF, STM32F103RG, STM32F103VG and STM32F103ZG */
+  /* #define STM32F105xC */    /*!< STM32F105R8, STM32F105V8, STM32F105RB, STM32F105VB, STM32F105RC and STM32F105VC */
+  /* #define STM32F107xC  */   /*!< STM32F107RB, STM32F107VB, STM32F107RC and STM32F107VC */  
+#endif
+
+/*  Tip: To avoid modifying this file each time you need to switch between these
+        devices, you can define the device in your toolchain compiler preprocessor.
+  */
+  
+#if !defined  (USE_HAL_DRIVER)
+/**
+ * @brief Comment the line below if you will not use the peripherals drivers.
+   In this case, these drivers will not be included and the application code will 
+   be based on direct access to peripherals registers 
+   */
+  /*#define USE_HAL_DRIVER */
+#endif /* USE_HAL_DRIVER */
+
+/**
+  * @brief CMSIS Device version number V4.3.1
+  */
+#define __STM32F1_CMSIS_VERSION_MAIN   (0x04) /*!< [31:24] main version */
+#define __STM32F1_CMSIS_VERSION_SUB1   (0x03) /*!< [23:16] sub1 version */
+#define __STM32F1_CMSIS_VERSION_SUB2   (0x01) /*!< [15:8]  sub2 version */
+#define __STM32F1_CMSIS_VERSION_RC     (0x00) /*!< [7:0]  release candidate */ 
+#define __STM32F1_CMSIS_VERSION        ((__STM32F1_CMSIS_VERSION_MAIN << 24)\
+                                       |(__STM32F1_CMSIS_VERSION_SUB1 << 16)\
+                                       |(__STM32F1_CMSIS_VERSION_SUB2 << 8 )\
+                                       |(__STM32F1_CMSIS_VERSION_RC))
+
+/**
+  * @}
+  */
+
+/** @addtogroup Device_Included
+  * @{
+  */
+
+#if defined(STM32F100xB)
+  #include "stm32f100xb.h"
+#elif defined(STM32F100xE)
+  #include "stm32f100xe.h"
+#elif defined(STM32F101x6)
+  #include "stm32f101x6.h"
+#elif defined(STM32F101xB)
+  #include "stm32f101xb.h"
+#elif defined(STM32F101xE)
+  #include "stm32f101xe.h"
+#elif defined(STM32F101xG)
+  #include "stm32f101xg.h"
+#elif defined(STM32F102x6)
+  #include "stm32f102x6.h"
+#elif defined(STM32F102xB)
+  #include "stm32f102xb.h"
+#elif defined(STM32F103x6)
+  #include "stm32f103x6.h"
+#elif defined(STM32F103xB)
+  #include "stm32f103xb.h"
+#elif defined(STM32F103xE)
+  #include "stm32f103xe.h"
+#elif defined(STM32F103xG)
+  #include "stm32f103xg.h"
+#elif defined(STM32F105xC)
+  #include "stm32f105xc.h"
+#elif defined(STM32F107xC)
+  #include "stm32f107xc.h"
+#else
+ #error "Please select first the target STM32F1xx device used in your application (in stm32f1xx.h file)"
+#endif
+
+/**
+  * @}
+  */
+
+/** @addtogroup Exported_types
+  * @{
+  */  
+typedef enum 
+{
+  RESET = 0, 
+  SET = !RESET
+} FlagStatus, ITStatus;
+
+typedef enum 
+{
+  DISABLE = 0, 
+  ENABLE = !DISABLE
+} FunctionalState;
+#define IS_FUNCTIONAL_STATE(STATE) (((STATE) == DISABLE) || ((STATE) == ENABLE))
+
+typedef enum
+{
+  SUCCESS = 0U,
+  ERROR = !SUCCESS
+} ErrorStatus;
+
+/**
+  * @}
+  */
+
+
+/** @addtogroup Exported_macros
+  * @{
+  */
+#define SET_BIT(REG, BIT)     ((REG) |= (BIT))
+
+#define CLEAR_BIT(REG, BIT)   ((REG) &= ~(BIT))
+
+#define READ_BIT(REG, BIT)    ((REG) & (BIT))
+
+#define CLEAR_REG(REG)        ((REG) = (0x0))
+
+#define WRITE_REG(REG, VAL)   ((REG) = (VAL))
+
+#define READ_REG(REG)         ((REG))
+
+#define MODIFY_REG(REG, CLEARMASK, SETMASK)  WRITE_REG((REG), (((READ_REG(REG)) & (~(CLEARMASK))) | (SETMASK)))
+
+#define POSITION_VAL(VAL)     (__CLZ(__RBIT(VAL))) 
+
+
+/**
+  * @}
+  */
+
+#if defined (USE_HAL_DRIVER)
+ #include "stm32f1xx_hal.h"
+#endif /* USE_HAL_DRIVER */
+
+
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+#endif /* __STM32F1xx_H */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+  
+
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

lib/stm32f1/include/system_stm32f1xx.h

@@ -0,0 +1,98 @@
+/**
+  ******************************************************************************
+  * @file    system_stm32f10x.h
+  * @author  MCD Application Team
+  * @brief   CMSIS Cortex-M3 Device Peripheral Access Layer System Header File.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/** @addtogroup CMSIS
+  * @{
+  */
+
+/** @addtogroup stm32f10x_system
+  * @{
+  */  
+  
+/**
+  * @brief Define to prevent recursive inclusion
+  */
+#ifndef __SYSTEM_STM32F10X_H
+#define __SYSTEM_STM32F10X_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif 
+
+/** @addtogroup STM32F10x_System_Includes
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+
+/** @addtogroup STM32F10x_System_Exported_types
+  * @{
+  */
+
+extern uint32_t SystemCoreClock;          /*!< System Clock Frequency (Core Clock) */
+extern const uint8_t  AHBPrescTable[16U];  /*!< AHB prescalers table values */
+extern const uint8_t  APBPrescTable[8U];   /*!< APB prescalers table values */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F10x_System_Exported_Constants
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F10x_System_Exported_Macros
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F10x_System_Exported_Functions
+  * @{
+  */
+  
+extern void SystemInit(void);
+extern void SystemCoreClockUpdate(void);
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__SYSTEM_STM32F10X_H */
+
+/**
+  * @}
+  */
+  
+/**
+  * @}
+  */  
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

lib/stm32f1/system_stm32f1xx.c

@@ -0,0 +1,430 @@
+/**
+  ******************************************************************************
+  * @file    system_stm32f1xx.c
+  * @author  MCD Application Team
+  * @brief   CMSIS Cortex-M3 Device Peripheral Access Layer System Source File.
+  * 
+  * 1.  This file provides two functions and one global variable to be called from 
+  *     user application:
+  *      - SystemInit(): Setups the system clock (System clock source, PLL Multiplier
+  *                      factors, AHB/APBx prescalers and Flash settings). 
+  *                      This function is called at startup just after reset and 
+  *                      before branch to main program. This call is made inside
+  *                      the "startup_stm32f1xx_xx.s" file.
+  *
+  *      - SystemCoreClock variable: Contains the core clock (HCLK), it can be used
+  *                                  by the user application to setup the SysTick 
+  *                                  timer or configure other parameters.
+  *                                     
+  *      - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must
+  *                                 be called whenever the core clock is changed
+  *                                 during program execution.
+  *
+  * 2. After each device reset the HSI (8 MHz) is used as system clock source.
+  *    Then SystemInit() function is called, in "startup_stm32f1xx_xx.s" file, to
+  *    configure the system clock before to branch to main program.
+  *
+  * 4. The default value of HSE crystal is set to 8 MHz (or 25 MHz, depending on
+  *    the product used), refer to "HSE_VALUE". 
+  *    When HSE is used as system clock source, directly or through PLL, and you
+  *    are using different crystal you have to adapt the HSE value to your own
+  *    configuration.
+  *        
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/** @addtogroup CMSIS
+  * @{
+  */
+
+/** @addtogroup stm32f1xx_system
+  * @{
+  */  
+  
+/** @addtogroup STM32F1xx_System_Private_Includes
+  * @{
+  */
+
+#include "stm32f1xx.h"
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F1xx_System_Private_TypesDefinitions
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F1xx_System_Private_Defines
+  * @{
+  */
+
+#if !defined  (HSE_VALUE) 
+  #define HSE_VALUE               8000000U /*!< Default value of the External oscillator in Hz.
+                                                This value can be provided and adapted by the user application. */
+#endif /* HSE_VALUE */
+
+#if !defined  (HSI_VALUE)
+  #define HSI_VALUE               8000000U /*!< Default value of the Internal oscillator in Hz.
+                                                This value can be provided and adapted by the user application. */
+#endif /* HSI_VALUE */
+
+/*!< Uncomment the following line if you need to use external SRAM  */ 
+#if defined(STM32F100xE) || defined(STM32F101xE) || defined(STM32F101xG) || defined(STM32F103xE) || defined(STM32F103xG)
+/* #define DATA_IN_ExtSRAM */
+#endif /* STM32F100xE || STM32F101xE || STM32F101xG || STM32F103xE || STM32F103xG */
+
+/*!< Uncomment the following line if you need to relocate your vector Table in
+     Internal SRAM. */ 
+/* #define VECT_TAB_SRAM */
+#define VECT_TAB_OFFSET  0x00000000U /*!< Vector Table base offset field. 
+                                  This value must be a multiple of 0x200. */
+
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F1xx_System_Private_Macros
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F1xx_System_Private_Variables
+  * @{
+  */
+
+  /* This variable is updated in three ways:
+      1) by calling CMSIS function SystemCoreClockUpdate()
+      2) by calling HAL API function HAL_RCC_GetHCLKFreq()
+      3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency 
+         Note: If you use this function to configure the system clock; then there
+               is no need to call the 2 first functions listed above, since SystemCoreClock
+               variable is updated automatically.
+  */
+uint32_t SystemCoreClock = 16000000;
+const uint8_t AHBPrescTable[16U] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9};
+const uint8_t APBPrescTable[8U] =  {0, 0, 0, 0, 1, 2, 3, 4};
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F1xx_System_Private_FunctionPrototypes
+  * @{
+  */
+
+#if defined(STM32F100xE) || defined(STM32F101xE) || defined(STM32F101xG) || defined(STM32F103xE) || defined(STM32F103xG)
+#ifdef DATA_IN_ExtSRAM
+  static void SystemInit_ExtMemCtl(void); 
+#endif /* DATA_IN_ExtSRAM */
+#endif /* STM32F100xE || STM32F101xE || STM32F101xG || STM32F103xE || STM32F103xG */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F1xx_System_Private_Functions
+  * @{
+  */
+
+/**
+  * @brief  Setup the microcontroller system
+  *         Initialize the Embedded Flash Interface, the PLL and update the 
+  *         SystemCoreClock variable.
+  * @note   This function should be used only after reset.
+  * @param  None
+  * @retval None
+  */
+void SystemInit (void)
+{
+  /* Reset the RCC clock configuration to the default reset state(for debug purpose) */
+  /* Set HSION bit */
+  RCC->CR |= 0x00000001U;
+
+  /* Reset SW, HPRE, PPRE1, PPRE2, ADCPRE and MCO bits */
+#if !defined(STM32F105xC) && !defined(STM32F107xC)
+  RCC->CFGR &= 0xF8FF0000U;
+#else
+  RCC->CFGR &= 0xF0FF0000U;
+#endif /* STM32F105xC */   
+  
+  /* Reset HSEON, CSSON and PLLON bits */
+  RCC->CR &= 0xFEF6FFFFU;
+
+  /* Reset HSEBYP bit */
+  RCC->CR &= 0xFFFBFFFFU;
+
+  /* Reset PLLSRC, PLLXTPRE, PLLMUL and USBPRE/OTGFSPRE bits */
+  RCC->CFGR &= 0xFF80FFFFU;
+
+#if defined(STM32F105xC) || defined(STM32F107xC)
+  /* Reset PLL2ON and PLL3ON bits */
+  RCC->CR &= 0xEBFFFFFFU;
+
+  /* Disable all interrupts and clear pending bits  */
+  RCC->CIR = 0x00FF0000U;
+
+  /* Reset CFGR2 register */
+  RCC->CFGR2 = 0x00000000U;
+#elif defined(STM32F100xB) || defined(STM32F100xE)
+  /* Disable all interrupts and clear pending bits  */
+  RCC->CIR = 0x009F0000U;
+
+  /* Reset CFGR2 register */
+  RCC->CFGR2 = 0x00000000U;      
+#else
+  /* Disable all interrupts and clear pending bits  */
+  RCC->CIR = 0x009F0000U;
+#endif /* STM32F105xC */
+    
+#if defined(STM32F100xE) || defined(STM32F101xE) || defined(STM32F101xG) || defined(STM32F103xE) || defined(STM32F103xG)
+  #ifdef DATA_IN_ExtSRAM
+    SystemInit_ExtMemCtl(); 
+  #endif /* DATA_IN_ExtSRAM */
+#endif 
+
+#ifdef VECT_TAB_SRAM
+  SCB->VTOR = SRAM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM. */
+#else
+  SCB->VTOR = FLASH_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH. */
+#endif 
+}
+
+/**
+  * @brief  Update SystemCoreClock variable according to Clock Register Values.
+  *         The SystemCoreClock variable contains the core clock (HCLK), it can
+  *         be used by the user application to setup the SysTick timer or configure
+  *         other parameters.
+  *           
+  * @note   Each time the core clock (HCLK) changes, this function must be called
+  *         to update SystemCoreClock variable value. Otherwise, any configuration
+  *         based on this variable will be incorrect.         
+  *     
+  * @note   - The system frequency computed by this function is not the real 
+  *           frequency in the chip. It is calculated based on the predefined 
+  *           constant and the selected clock source:
+  *             
+  *           - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*)
+  *                                              
+  *           - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(**)
+  *                          
+  *           - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**) 
+  *             or HSI_VALUE(*) multiplied by the PLL factors.
+  *         
+  *         (*) HSI_VALUE is a constant defined in stm32f1xx.h file (default value
+  *             8 MHz) but the real value may vary depending on the variations
+  *             in voltage and temperature.   
+  *    
+  *         (**) HSE_VALUE is a constant defined in stm32f1xx.h file (default value
+  *              8 MHz or 25 MHz, depending on the product used), user has to ensure
+  *              that HSE_VALUE is same as the real frequency of the crystal used.
+  *              Otherwise, this function may have wrong result.
+  *                
+  *         - The result of this function could be not correct when using fractional
+  *           value for HSE crystal.
+  * @param  None
+  * @retval None
+  */
+void SystemCoreClockUpdate (void)
+{
+  uint32_t tmp = 0U, pllmull = 0U, pllsource = 0U;
+
+#if defined(STM32F105xC) || defined(STM32F107xC)
+  uint32_t prediv1source = 0U, prediv1factor = 0U, prediv2factor = 0U, pll2mull = 0U;
+#endif /* STM32F105xC */
+
+#if defined(STM32F100xB) || defined(STM32F100xE)
+  uint32_t prediv1factor = 0U;
+#endif /* STM32F100xB or STM32F100xE */
+    
+  /* Get SYSCLK source -------------------------------------------------------*/
+  tmp = RCC->CFGR & RCC_CFGR_SWS;
+  
+  switch (tmp)
+  {
+    case 0x00U:  /* HSI used as system clock */
+      SystemCoreClock = HSI_VALUE;
+      break;
+    case 0x04U:  /* HSE used as system clock */
+      SystemCoreClock = HSE_VALUE;
+      break;
+    case 0x08U:  /* PLL used as system clock */
+
+      /* Get PLL clock source and multiplication factor ----------------------*/
+      pllmull = RCC->CFGR & RCC_CFGR_PLLMULL;
+      pllsource = RCC->CFGR & RCC_CFGR_PLLSRC;
+      
+#if !defined(STM32F105xC) && !defined(STM32F107xC)      
+      pllmull = ( pllmull >> 18U) + 2U;
+      
+      if (pllsource == 0x00U)
+      {
+        /* HSI oscillator clock divided by 2 selected as PLL clock entry */
+        SystemCoreClock = (HSI_VALUE >> 1U) * pllmull;
+      }
+      else
+      {
+ #if defined(STM32F100xB) || defined(STM32F100xE)
+       prediv1factor = (RCC->CFGR2 & RCC_CFGR2_PREDIV1) + 1U;
+       /* HSE oscillator clock selected as PREDIV1 clock entry */
+       SystemCoreClock = (HSE_VALUE / prediv1factor) * pllmull; 
+ #else
+        /* HSE selected as PLL clock entry */
+        if ((RCC->CFGR & RCC_CFGR_PLLXTPRE) != (uint32_t)RESET)
+        {/* HSE oscillator clock divided by 2 */
+          SystemCoreClock = (HSE_VALUE >> 1U) * pllmull;
+        }
+        else
+        {
+          SystemCoreClock = HSE_VALUE * pllmull;
+        }
+ #endif
+      }
+#else
+      pllmull = pllmull >> 18U;
+      
+      if (pllmull != 0x0DU)
+      {
+         pllmull += 2U;
+      }
+      else
+      { /* PLL multiplication factor = PLL input clock * 6.5 */
+        pllmull = 13U / 2U; 
+      }
+            
+      if (pllsource == 0x00U)
+      {
+        /* HSI oscillator clock divided by 2 selected as PLL clock entry */
+        SystemCoreClock = (HSI_VALUE >> 1U) * pllmull;
+      }
+      else
+      {/* PREDIV1 selected as PLL clock entry */
+        
+        /* Get PREDIV1 clock source and division factor */
+        prediv1source = RCC->CFGR2 & RCC_CFGR2_PREDIV1SRC;
+        prediv1factor = (RCC->CFGR2 & RCC_CFGR2_PREDIV1) + 1U;
+        
+        if (prediv1source == 0U)
+        { 
+          /* HSE oscillator clock selected as PREDIV1 clock entry */
+          SystemCoreClock = (HSE_VALUE / prediv1factor) * pllmull;          
+        }
+        else
+        {/* PLL2 clock selected as PREDIV1 clock entry */
+          
+          /* Get PREDIV2 division factor and PLL2 multiplication factor */
+          prediv2factor = ((RCC->CFGR2 & RCC_CFGR2_PREDIV2) >> 4U) + 1U;
+          pll2mull = ((RCC->CFGR2 & RCC_CFGR2_PLL2MUL) >> 8U) + 2U; 
+          SystemCoreClock = (((HSE_VALUE / prediv2factor) * pll2mull) / prediv1factor) * pllmull;                         
+        }
+      }
+#endif /* STM32F105xC */ 
+      break;
+
+    default:
+      SystemCoreClock = HSI_VALUE;
+      break;
+  }
+  
+  /* Compute HCLK clock frequency ----------------*/
+  /* Get HCLK prescaler */
+  tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4U)];
+  /* HCLK clock frequency */
+  SystemCoreClock >>= tmp;  
+}
+
+#if defined(STM32F100xE) || defined(STM32F101xE) || defined(STM32F101xG) || defined(STM32F103xE) || defined(STM32F103xG)
+/**
+  * @brief  Setup the external memory controller. Called in startup_stm32f1xx.s 
+  *          before jump to __main
+  * @param  None
+  * @retval None
+  */ 
+#ifdef DATA_IN_ExtSRAM
+/**
+  * @brief  Setup the external memory controller. 
+  *         Called in startup_stm32f1xx_xx.s/.c before jump to main.
+  *         This function configures the external SRAM mounted on STM3210E-EVAL
+  *         board (STM32 High density devices). This SRAM will be used as program
+  *         data memory (including heap and stack).
+  * @param  None
+  * @retval None
+  */ 
+void SystemInit_ExtMemCtl(void) 
+{
+  __IO uint32_t tmpreg;
+  /*!< FSMC Bank1 NOR/SRAM3 is used for the STM3210E-EVAL, if another Bank is 
+    required, then adjust the Register Addresses */
+
+  /* Enable FSMC clock */
+  RCC->AHBENR = 0x00000114U;
+
+  /* Delay after an RCC peripheral clock enabling */
+  tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_FSMCEN);
+  
+  /* Enable GPIOD, GPIOE, GPIOF and GPIOG clocks */
+  RCC->APB2ENR = 0x000001E0U;
+  
+  /* Delay after an RCC peripheral clock enabling */
+  tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_IOPDEN);
+
+  (void)(tmpreg);
+  
+/* ---------------  SRAM Data lines, NOE and NWE configuration ---------------*/
+/*----------------  SRAM Address lines configuration -------------------------*/
+/*----------------  NOE and NWE configuration --------------------------------*/  
+/*----------------  NE3 configuration ----------------------------------------*/
+/*----------------  NBL0, NBL1 configuration ---------------------------------*/
+  
+  GPIOD->CRL = 0x44BB44BBU;  
+  GPIOD->CRH = 0xBBBBBBBBU;
+
+  GPIOE->CRL = 0xB44444BBU;  
+  GPIOE->CRH = 0xBBBBBBBBU;
+
+  GPIOF->CRL = 0x44BBBBBBU;  
+  GPIOF->CRH = 0xBBBB4444U;
+
+  GPIOG->CRL = 0x44BBBBBBU;  
+  GPIOG->CRH = 0x444B4B44U;
+   
+/*----------------  FSMC Configuration ---------------------------------------*/  
+/*----------------  Enable FSMC Bank1_SRAM Bank ------------------------------*/
+  
+  FSMC_Bank1->BTCR[4U] = 0x00001091U;
+  FSMC_Bank1->BTCR[5U] = 0x00110212U;
+}
+#endif /* DATA_IN_ExtSRAM */
+#endif /* STM32F100xE || STM32F101xE || STM32F101xG || STM32F103xE || STM32F103xG */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+  
+/**
+  * @}
+  */    
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/