klipper update

config/sample-raspberry-pi.cfg

@@ -0,0 +1,44 @@
+# This file contains an example configuration with RPi as secondary mcu
+
+# See docs/Config_Reference.md for a description of parameters.
+
+# The rpi microcontroller is used as secondary.
+# Typically, both the X and Y axes
+# are connected to the main micro-controller. The rpi microcontroller is used
+# on non time-critical functions such as enclosure sensors, additional fan or
+# light sources
+[mcu host]
+serial: /tmp/klipper_host_mcu
+
+# Example1: A led strip controlled by the GPIO20 on the RPi
+[output_pin caselight]
+pin: host:gpio20
+# You can also write the pin in extended form by specifying
+# the reference gpiochip.
+#pin: host:gpiochip0/gpio20
+
+[gcode_macro TOGGLE_CASELIGHT]
+gcode:
+  SET_PIN PIN=caselight VALUE={(not printer['output_pin caselight'].value)|int}
+
+
+# Example2: Using the i2c bus of the RPi to read a sensor
+[temperature_sensor enclosure_temp]
+sensor_type: HTU21D
+i2c_mcu: host
+i2c_bus: i2c.1
+htu21d_hold_master: False
+
+[gcode_macro QUERY_ENCLOSURE]
+gcode:
+    {% set sensor = printer["htu21d enclosure_temp"] %}
+    {action_respond_info(
+        "Temperature: %.2f C\n"
+        "Humidity: %.2f%%" % (
+            sensor.temperature,
+            sensor.humidity))}
+
+# Example 3:Using a pin on another gpiochip connected to the RPi
+# (in this case on an MCP23017)
+[fan]
+pin: host:gpiochip2/gpio7