klipper update

config/sample-multi-mcu.cfg

@@ -0,0 +1,87 @@
+# This file contains an example configuration with three
+# micro-controllers simultaneously controlling a single printer.
+
+# See docs/Config_Reference.md for a description of parameters.
+
+
+# The main micro-controller is used as the timing source for all the
+# micro-controllers on the printer. Typically, both the X and Y axes
+# are connected to the main micro-controller.
+[mcu]
+serial: /dev/serial/by-path/platform-3f980000.usb-usb-0:1.2:1.0-port0
+
+# The "zboard" micro-controller will be used to control the Z axis.
+[mcu zboard]
+serial: /dev/serial/by-path/platform-3f980000.usb-usb-0:1.3:1.0-port0
+
+# The "auxboard" micro-controller will be used to control the heaters.
+[mcu auxboard]
+serial: /dev/serial/by-path/platform-3f980000.usb-usb-0:1.4:1.0-port0
+
+[stepper_x]
+step_pin: PF0
+dir_pin: PF1
+enable_pin: !PD7
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^PE5
+position_endstop: 0
+position_max: 200
+homing_speed: 50
+
+[stepper_y]
+step_pin: PF6
+dir_pin: !PF7
+enable_pin: !PF2
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^PJ1
+position_endstop: 0
+position_max: 200
+homing_speed: 50
+
+[stepper_z]
+step_pin: zboard:PL3
+dir_pin: zboard:PL1
+enable_pin: !zboard:PK0
+microsteps: 16
+rotation_distance: 8
+endstop_pin: ^zboard:PD3
+position_endstop: 0.5
+position_max: 200
+
+[extruder]
+step_pin: auxboard:PA4
+dir_pin: auxboard:PA6
+enable_pin: !auxboard:PA2
+microsteps: 16
+rotation_distance: 33.500
+nozzle_diameter: 0.400
+filament_diameter: 1.750
+heater_pin: auxboard:PB4
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: auxboard:PK5
+control: pid
+pid_Kp: 22.2
+pid_Ki: 1.08
+pid_Kd: 114
+min_temp: 0
+max_temp: 250
+
+[heater_bed]
+heater_pin: auxboard:PH5
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: auxboard:PK6
+control: watermark
+min_temp: 0
+max_temp: 130
+
+[fan]
+pin: auxboard:PH6
+
+[printer]
+kinematics: cartesian
+max_velocity: 300
+max_accel: 3000
+max_z_velocity: 5
+max_z_accel: 100