klipper update

config/printer-wanhao-duplicator-i3-mini-2017.cfg

@@ -0,0 +1,79 @@
+# This file contains pin mappings for the Wanhao Duplicator i3 mini.
+# (circa 2017) To use this config, the firmware should be compiled
+# for the AVR atmega2560.
+# Pin numbers and other parameters were extracted from the official
+# Marlin source available at: https://github.com/garychen99/i3Mini
+
+# See docs/Config_Reference.md for a description of parameters.
+
+[stepper_x]
+step_pin: PA0
+dir_pin: !PA1
+enable_pin: !PF3
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^!PD2
+position_endstop: 120
+position_max: 120
+homing_speed: 30.0
+
+[stepper_y]
+step_pin: PA3
+dir_pin: PA4
+enable_pin: !PA2
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^!PD3
+position_endstop: 0
+position_max: 135
+homing_speed: 30.0
+
+[stepper_z]
+step_pin: PA7
+dir_pin: PG2
+enable_pin: !PA6
+microsteps: 16
+rotation_distance: 8
+endstop_pin: ^!PD7
+position_endstop: 0.5
+position_max: 100
+
+[extruder]
+step_pin: PF1
+dir_pin: !PF2
+enable_pin: !PF0
+microsteps: 16
+rotation_distance: 34.043
+nozzle_diameter: 0.400
+filament_diameter: 1.750
+heater_pin: PG5
+sensor_type: NTC 100K MGB18-104F39050L32
+sensor_pin: PK5
+control: pid
+pid_Kp: 22.2
+pid_Ki: 1.08
+pid_Kd: 114
+min_temp: 1
+max_temp: 265
+
+[fan]
+pin: PB6
+
+[mcu]
+serial: /dev/serial/by-id/usb-1a86_USB2.0-Serial-if00-port0
+
+[printer]
+kinematics: cartesian
+max_velocity: 300
+max_accel: 3000
+max_z_velocity: 5
+max_z_accel: 100
+
+[display]
+lcd_type: uc1701
+cs_pin: PG0
+a0_pin: PG1
+rst_pin: PA5
+click_pin: ^!PE3
+encoder_pins: ^PE5, ^PE4
+kill_pin: PK2