klipper update

config/printer-tevo-tarantula-pro-2020.cfg

@@ -0,0 +1,101 @@
+# Support for the green Tevo Tarantula Pro. To use this config, the firmware
+# should be compiled for the AVR atmega2560.
+# Note that this config file is for the "old green" Tarantula pro, with a
+# MKS Gen_l 8-bit board.
+# It _will not_ work out of the box for the "new orange" Tarantula pro with a
+# MKS Sgen_l 32-bit board.
+
+# See docs/Config_Reference.md for a description of parameters.
+
+[stepper_x]
+step_pin: PF0
+dir_pin: !PF1
+enable_pin: !PD7
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^!PE5
+position_endstop: -2
+position_max: 220
+position_min: -2
+homing_speed: 25.0
+
+[stepper_y]
+step_pin: PF6
+dir_pin: PF7
+enable_pin: !PF2
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^!PJ1
+position_endstop: 0
+position_max: 220
+homing_speed: 25.0
+
+[stepper_z]
+step_pin: PL3
+dir_pin: PL1
+enable_pin: !PK0
+microsteps: 16
+rotation_distance: 8
+endstop_pin: ^!PD3
+position_endstop: 0
+position_max: 200
+
+# Enable for dual-z addon
+#[stepper_z1]
+#step_pin: PC1
+#dir_pin: PC3
+#enable_pin: !PC7
+#microsteps: 16
+#rotation_distance: 8
+
+[extruder]
+step_pin: PA4
+dir_pin: PA6
+enable_pin: !PA2
+microsteps: 16
+rotation_distance: 7.904
+nozzle_diameter: 0.400
+filament_diameter: 1.75
+
+heater_pin: PB4
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: PK5
+control: pid
+pid_Kp: 22.5
+pid_Ki: 1.78
+pid_Kd: 74.16
+min_temp: 0
+max_temp: 220
+
+[heater_bed]
+heater_pin: PH5
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: PK6
+control: watermark
+min_temp: 0
+max_temp: 110
+
+[fan]
+pin: PH6
+
+[mcu]
+serial: /dev/serial/by-id/usb-1a86_USB2.0-Serial-if00-port0
+
+[printer]
+kinematics: cartesian
+max_velocity: 400
+max_accel: 3000
+max_z_velocity: 50
+max_z_accel: 100
+
+[heater_fan nozzle_fan]
+pin: PH4
+
+[display]
+lcd_type: uc1701
+cs_pin: PA3
+a0_pin: PA5
+encoder_pins: ^!PC6, ^!PC4
+click_pin: ^!PC2
+kill_pin: !PG0
+menu_reverse_navigation: true