klipper update

config/generic-gt2560.cfg

@@ -0,0 +1,91 @@
+# This file contains common pin mappings for the Geeetech GT2560
+# board. GT2560 board uses a firmware compiled for the AVR
+# atmega2560.
+
+# See docs/Config_Reference.md for a description of parameters.
+
+[stepper_x]
+step_pin: PA3
+dir_pin: PA1
+enable_pin: !PA5
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^PA0
+position_endstop: 0
+position_max: 200
+homing_speed: 30
+
+[stepper_y]
+step_pin: PC6
+dir_pin: PC4
+enable_pin: !PA7
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^PA4
+position_endstop: 0
+position_max: 200
+homing_speed: 30
+
+[stepper_z]
+step_pin: PC0
+dir_pin: !PG2
+enable_pin: !PC2
+microsteps: 16
+rotation_distance: 8
+endstop_pin: ^PC7
+position_endstop: 0
+position_max: 200
+position_min: 0.0
+
+[extruder]
+step_pin: PL6
+dir_pin: PL4
+enable_pin: !PG0
+microsteps: 16
+rotation_distance: 33.500
+nozzle_diameter: 0.4
+filament_diameter: 1.750
+heater_pin: PE4
+sensor_type: ATC Semitec 104GT-2
+sensor_pin: PK0
+min_temp: 0
+max_temp: 250
+control: pid
+pid_kp: 29.800
+pid_ki: 1.774
+pid_kd: 125.159
+
+[heater_bed]
+heater_pin: PG5
+sensor_type: ATC Semitec 104GT-2
+sensor_pin: PK2
+min_temp: 0
+max_temp: 120
+control: pid
+pid_kp: 63.041
+pid_ki: 2.898
+pid_kd: 342.787
+
+[fan]
+pin: PH4
+
+[mcu]
+serial: /dev/ttyUSB0
+
+[printer]
+kinematics: cartesian
+max_velocity: 200
+max_accel: 1500
+max_z_velocity: 20
+max_z_accel: 500
+
+[display]
+lcd_type: hd44780
+rs_pin: PD1
+e_pin: PH0
+d4_pin: PH1
+d5_pin: PD0
+d6_pin: PE3
+d7_pin: PH3
+encoder_pins: ^PL7, ^PG1
+click_pin: ^!PD2