klipper update

config/generic-bigtreetech-skr-v1.1.cfg

@@ -0,0 +1,95 @@
+# This file contains common pin mappings for the BIGTREETECH SKR V1.1
+# board. To use this config, the firmware should be compiled for the
+# LPC1768.
+
+# See docs/Config_Reference.md for a description of parameters.
+
+[stepper_x]
+step_pin: P0.4
+dir_pin: !P0.5
+enable_pin: !P4.28
+microsteps: 16
+rotation_distance: 8
+endstop_pin: P1.29
+position_endstop: 0
+position_max: 200
+homing_speed: 50
+
+[stepper_y]
+step_pin: P2.1
+dir_pin: P2.2
+enable_pin: !P2.0
+microsteps: 16
+rotation_distance: 8
+endstop_pin: P1.27
+position_endstop: 0
+position_max: 200
+homing_speed: 50
+
+[stepper_z]
+step_pin: P0.20
+dir_pin: P0.21
+enable_pin: !P0.19
+microsteps: 16
+rotation_distance: 40
+endstop_pin: !P1.25
+position_endstop: 0.5
+position_max: 200
+
+#[stepper_z1]
+#step_pin: P0.1
+#dir_pin: P0.0
+#enable_pin: !P0.10
+#position_endstop: 0.5
+#position_max: 200
+
+[extruder]
+step_pin: P0.11
+dir_pin: P2.13
+enable_pin: !P2.12
+microsteps: 16
+rotation_distance: 33.500
+nozzle_diameter: 0.400
+filament_diameter: 1.750
+heater_pin: P2.7
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: P0.24
+control: pid
+pid_Kp: 22.2
+pid_Ki: 1.08
+pid_Kd: 114
+min_temp: 0
+max_temp: 250
+
+[heater_bed]
+heater_pin: P2.5
+sensor_type: ATC Semitec 104GT-2
+sensor_pin: P0.23
+control: watermark
+min_temp: 0
+max_temp: 130
+
+[fan]
+pin: P2.3
+
+[mcu]
+serial: /dev/serial/by-id/usb-Klipper_Klipper_firmware_12345-if00
+
+[printer]
+kinematics: cartesian
+max_velocity: 300
+max_accel: 3000
+max_z_velocity: 5
+max_z_accel: 100
+
+[board_pins]
+aliases:
+    # EXP1 header
+    EXP1_1=P1.30, EXP1_3=P0.18, EXP1_5=P0.15, EXP1_7=<NC>, EXP1_9=<GND>,
+    EXP1_2=P2.11, EXP1_4=P0.16, EXP1_6=<NC>,  EXP1_8=<NC>, EXP1_10=<5V>,
+    # EXP2 header
+    EXP2_1=P0.17, EXP2_3=P3.26, EXP2_5=P3.25, EXP2_7=P1.31, EXP2_9=<GND>,
+    EXP2_2=P0.15, EXP2_4=P1.23, EXP2_6=P0.18, EXP2_8=<RST>, EXP2_10=<NC>
+    # Pins EXP2_1, EXP2_6, EXP2_2 are also MISO, MOSI, SCK of bus "ssp0"
+
+# See the sample-lcd.cfg file for definitions of common LCD displays.