Add files via upload

scripts/Dockerfile

@@ -0,0 +1,44 @@
+# This is an example Dockerfile showing how it's possible to install Klipper in Docker.
+# IMPORTANT: The docker build must be run from the root of the repo, either copy the
+# Dockerfile to the root, or run docker build with "-f", for example:
+#       docker build . -f scripts/Dockerfile -t klipper
+# Note that the host still needs to run Linux to connect the printers serial port to
+# the container.
+# When running, the serial port of your printer should be connected, including an
+# argument such as:
+#       --device /dev/ttyUSB0:/dev/ttyUSB0
+# It's also required that your control program (eg: OctoPrint) be included in the same
+# container as Docker does not allow sharing of the virtual serial port outside the
+# container.
+# The config should be in a file named "printer.cfg" in a directory mounted at:
+#       /home/klippy/.config/
+# For more Dockerfile examples with Klipper (and Octoprint) see:
+# https://github.com/sillyfrog/OctoPrint-Klipper-mjpg-Dockerfile
+FROM ubuntu:18.04
+
+RUN apt-get update && \
+    apt-get install -y sudo
+
+# Create user
+RUN useradd -ms /bin/bash klippy && adduser klippy dialout
+USER klippy
+
+#This fixes issues with the volume command setting wrong permissions
+RUN mkdir /home/klippy/.config
+VOLUME /home/klippy/.config
+
+### Klipper setup ###
+WORKDIR /home/klippy
+
+COPY . klipper/
+USER root
+RUN echo 'klippy ALL=(ALL:ALL) NOPASSWD: ALL' > /etc/sudoers.d/klippy && \
+    chown klippy:klippy -R klipper
+# This is to allow the install script to run without error
+RUN ln -s /bin/true /bin/systemctl
+USER klippy
+RUN ./klipper/scripts/install-ubuntu-18.04.sh
+# Clean up install script workaround
+RUN sudo rm -f /bin/systemctl
+
+CMD ["/home/klippy/klippy-env/bin/python", "/home/klippy/klipper/klippy/klippy.py", "/home/klippy/.config/printer.cfg"]

scripts/avrsim.py

@@ -0,0 +1,245 @@
+#!/usr/bin/env python3
+# Script to interact with simulavr by simulating a serial port.
+#
+# Copyright (C) 2015-2018  Kevin O'Connor <kevin@koconnor.net>
+#
+# This file may be distributed under the terms of the GNU GPLv3 license.
+import sys, optparse, time, os, pty, fcntl, termios, errno
+import pysimulavr
+
+SERIALBITS = 10 # 8N1 = 1 start, 8 data, 1 stop
+SIMULAVR_FREQ = 10**9
+
+# Class to read serial data from AVR serial transmit pin.
+class SerialRxPin(pysimulavr.PySimulationMember, pysimulavr.Pin):
+    def __init__(self, baud, terminal):
+        pysimulavr.Pin.__init__(self)
+        pysimulavr.PySimulationMember.__init__(self)
+        self.terminal = terminal
+        self.sc = pysimulavr.SystemClock.Instance()
+        self.delay = SIMULAVR_FREQ // baud
+        self.current = 0
+        self.pos = -1
+    def SetInState(self, pin):
+        pysimulavr.Pin.SetInState(self, pin)
+        self.state = pin.outState
+        if self.pos < 0 and pin.outState == pin.LOW:
+            self.pos = 0
+            self.sc.Add(self)
+    def DoStep(self, trueHwStep):
+        ishigh = self.state == self.HIGH
+        self.current |= ishigh << self.pos
+        self.pos += 1
+        if self.pos == 1:
+            return int(self.delay * 1.5)
+        if self.pos >= SERIALBITS:
+            data = bytearray([(self.current >> 1) & 0xff])
+            self.terminal.write(data)
+            self.pos = -1
+            self.current = 0
+            return -1
+        return self.delay
+
+# Class to send serial data to AVR serial receive pin.
+class SerialTxPin(pysimulavr.PySimulationMember, pysimulavr.Pin):
+    def __init__(self, baud, terminal):
+        pysimulavr.Pin.__init__(self)
+        pysimulavr.PySimulationMember.__init__(self)
+        self.terminal = terminal
+        self.SetPin('H')
+        self.sc = pysimulavr.SystemClock.Instance()
+        self.delay = SIMULAVR_FREQ // baud
+        self.current = 0
+        self.pos = 0
+        self.queue = bytearray()
+        self.sc.Add(self)
+    def DoStep(self, trueHwStep):
+        if not self.pos:
+            if not self.queue:
+                data = self.terminal.read()
+                if not data:
+                    return self.delay * 100
+                self.queue.extend(data)
+            self.current = (self.queue.pop(0) << 1) | 0x200
+        newstate = 'L'
+        if self.current & (1 << self.pos):
+            newstate = 'H'
+        self.SetPin(newstate)
+        self.pos += 1
+        if self.pos >= SERIALBITS:
+            self.pos = 0
+        return self.delay
+
+# Support for creating VCD trace files
+class Tracing:
+    def __init__(self, filename, signals):
+        self.filename = filename
+        self.signals = signals
+        if not signals:
+            self.dman = None
+            return
+        self.dman = pysimulavr.DumpManager.Instance()
+        self.dman.SetSingleDeviceApp()
+    def show_help(self):
+        ostr = pysimulavr.ostringstream()
+        self.dman.save(ostr)
+        sys.stdout.write(ostr.str())
+        sys.exit(1)
+    def load_options(self):
+        if self.dman is None:
+            return
+        if self.signals.strip() == '?':
+            self.show_help()
+        sigs = "\n".join(["+ " + s for s in self.signals.split(',')])
+        self.dman.addDumpVCD(self.filename, sigs, "ns", False, False)
+    def start(self):
+        if self.dman is not None:
+            self.dman.start()
+    def finish(self):
+        if self.dman is not None:
+            self.dman.stopApplication()
+
+# Pace the simulation scaled to real time
+class Pacing(pysimulavr.PySimulationMember):
+    def __init__(self, rate):
+        pysimulavr.PySimulationMember.__init__(self)
+        self.sc = pysimulavr.SystemClock.Instance()
+        self.pacing_rate = 1. / (rate * SIMULAVR_FREQ)
+        self.next_check_clock = 0
+        self.rel_time = time.time()
+        self.best_offset = 0.
+        self.delay = SIMULAVR_FREQ // 10000
+        self.sc.Add(self)
+    def DoStep(self, trueHwStep):
+        curtime = time.time()
+        clock = self.sc.GetCurrentTime()
+        offset = clock * self.pacing_rate - (curtime - self.rel_time)
+        self.best_offset = max(self.best_offset, offset)
+        if offset > 0.000050:
+            time.sleep(offset - 0.000040)
+        if clock >= self.next_check_clock:
+            self.rel_time -= min(self.best_offset, 0.)
+            self.next_check_clock = clock + self.delay * 500
+            self.best_offset = -999999999.
+        return self.delay
+
+# Forward data from a terminal device to the serial port pins
+class TerminalIO:
+    def __init__(self):
+        self.fd = -1
+    def run(self, fd):
+        self.fd = fd
+    def write(self, data):
+        os.write(self.fd, data)
+    def read(self):
+        try:
+            return os.read(self.fd, 64)
+        except os.error as e:
+            if e.errno not in (errno.EAGAIN, errno.EWOULDBLOCK):
+                pysimulavr.SystemClock.Instance().stop()
+        return ""
+
+# Support for creating a pseudo-tty for emulating a serial port
+def create_pty(ptyname):
+    mfd, sfd = pty.openpty()
+    try:
+        os.unlink(ptyname)
+    except os.error:
+        pass
+    os.symlink(os.ttyname(sfd), ptyname)
+    fcntl.fcntl(mfd, fcntl.F_SETFL
+                , fcntl.fcntl(mfd, fcntl.F_GETFL) | os.O_NONBLOCK)
+    tcattr = termios.tcgetattr(mfd)
+    tcattr[0] &= ~(
+        termios.IGNBRK | termios.BRKINT | termios.PARMRK | termios.ISTRIP |
+        termios.INLCR | termios.IGNCR | termios.ICRNL | termios.IXON)
+    tcattr[1] &= ~termios.OPOST
+    tcattr[3] &= ~(
+        termios.ECHO | termios.ECHONL | termios.ICANON | termios.ISIG |
+        termios.IEXTEN)
+    tcattr[2] &= ~(termios.CSIZE | termios.PARENB)
+    tcattr[2] |= termios.CS8
+    tcattr[6][termios.VMIN] = 0
+    tcattr[6][termios.VTIME] = 0
+    termios.tcsetattr(mfd, termios.TCSAFLUSH, tcattr)
+    return mfd
+
+def main():
+    usage = "%prog [options] <program.elf>"
+    opts = optparse.OptionParser(usage)
+    opts.add_option("-m", "--machine", type="string", dest="machine",
+                    default="atmega644", help="type of AVR machine to simulate")
+    opts.add_option("-s", "--speed", type="int", dest="speed", default=16000000,
+                    help="machine speed")
+    opts.add_option("-r", "--rate", type="float", dest="pacing_rate",
+                    default=0., help="real-time pacing rate")
+    opts.add_option("-b", "--baud", type="int", dest="baud", default=250000,
+                    help="baud rate of the emulated serial port")
+    opts.add_option("-t", "--trace", type="string", dest="trace",
+                    help="signals to trace (? for help)")
+    opts.add_option("-p", "--port", type="string", dest="port",
+                    default="/tmp/pseudoserial",
+                    help="pseudo-tty device to create for serial port")
+    deffile = os.path.splitext(os.path.basename(sys.argv[0]))[0] + ".vcd"
+    opts.add_option("-f", "--tracefile", type="string", dest="tracefile",
+                    default=deffile, help="filename to write signal trace to")
+    options, args = opts.parse_args()
+    if len(args) != 1:
+        opts.error("Incorrect number of arguments")
+    elffile = args[0]
+    proc = options.machine
+    ptyname = options.port
+    speed = options.speed
+    baud = options.baud
+
+    # launch simulator
+    sc = pysimulavr.SystemClock.Instance()
+    trace = Tracing(options.tracefile, options.trace)
+    dev = pysimulavr.AvrFactory.instance().makeDevice(proc)
+    dev.Load(elffile)
+    dev.SetClockFreq(SIMULAVR_FREQ // speed)
+    sc.Add(dev)
+    pysimulavr.cvar.sysConHandler.SetUseExit(False)
+    trace.load_options()
+
+    # Do optional real-time pacing
+    if options.pacing_rate:
+        pacing = Pacing(options.pacing_rate)
+
+    # Setup terminal
+    io = TerminalIO()
+
+    # Setup rx pin
+    rxpin = SerialRxPin(baud, io)
+    net = pysimulavr.Net()
+    net.Add(rxpin)
+    net.Add(dev.GetPin("D1"))
+
+    # Setup tx pin
+    txpin = SerialTxPin(baud, io)
+    net2 = pysimulavr.Net()
+    net2.Add(dev.GetPin("D0"))
+    net2.Add(txpin)
+
+    # Display start banner
+    msg = "Starting AVR simulation: machine=%s speed=%d\n" % (proc, speed)
+    msg += "Serial: port=%s baud=%d\n" % (ptyname, baud)
+    if options.trace:
+        msg += "Trace file: %s\n" % (options.tracefile,)
+    sys.stdout.write(msg)
+    sys.stdout.flush()
+
+    # Create terminal device
+    fd = create_pty(ptyname)
+
+    # Run loop
+    try:
+        io.run(fd)
+        trace.start()
+        sc.RunTimeRange(0x7fff0000ffff0000)
+        trace.finish()
+    finally:
+        os.unlink(ptyname)
+
+if __name__ == '__main__':
+    main()

scripts/buildcommands.py

@@ -0,0 +1,618 @@
+#!/usr/bin/env python2
+# Script to handle build time requests embedded in C code.
+#
+# Copyright (C) 2016-2021  Kevin O'Connor <kevin@koconnor.net>
+#
+# This file may be distributed under the terms of the GNU GPLv3 license.
+import sys, os, subprocess, optparse, logging, shlex, socket, time, traceback
+import json, zlib
+sys.path.append('./klippy')
+import msgproto
+
+FILEHEADER = """
+/* DO NOT EDIT! This is an autogenerated file. See scripts/buildcommands.py. */
+
+#include "board/irq.h"
+#include "board/pgm.h"
+#include "command.h"
+#include "compiler.h"
+#include "initial_pins.h"
+"""
+
+def error(msg):
+    sys.stderr.write(msg + "\n")
+    sys.exit(-1)
+
+Handlers = []
+
+
+######################################################################
+# C call list generation
+######################################################################
+
+# Create dynamic C functions that call a list of other C functions
+class HandleCallList:
+    def __init__(self):
+        self.call_lists = {'ctr_run_initfuncs': []}
+        self.ctr_dispatch = { '_DECL_CALLLIST': self.decl_calllist }
+    def decl_calllist(self, req):
+        funcname, callname = req.split()[1:]
+        self.call_lists.setdefault(funcname, []).append(callname)
+    def update_data_dictionary(self, data):
+        pass
+    def generate_code(self, options):
+        code = []
+        for funcname, funcs in self.call_lists.items():
+            func_code = ['    extern void %s(void);\n    %s();' % (f, f)
+                         for f in funcs]
+            if funcname == 'ctr_run_taskfuncs':
+                add_poll = '    irq_poll();\n'
+                func_code = [add_poll + fc for fc in func_code]
+                func_code.append(add_poll)
+            fmt = """
+void
+%s(void)
+{
+    %s
+}
+"""
+            code.append(fmt % (funcname, "\n".join(func_code).strip()))
+        return "".join(code)
+
+Handlers.append(HandleCallList())
+
+
+######################################################################
+# Enumeration and static string generation
+######################################################################
+
+STATIC_STRING_MIN = 2
+
+# Generate a dynamic string to integer mapping
+class HandleEnumerations:
+    def __init__(self):
+        self.static_strings = []
+        self.enumerations = {}
+        self.ctr_dispatch = {
+            '_DECL_STATIC_STR': self.decl_static_str,
+            'DECL_ENUMERATION': self.decl_enumeration,
+            'DECL_ENUMERATION_RANGE': self.decl_enumeration_range
+        }
+    def add_enumeration(self, enum, name, value):
+        enums = self.enumerations.setdefault(enum, {})
+        if name in enums and enums[name] != value:
+            error("Conflicting definition for enumeration '%s %s'" % (
+                enum, name))
+        enums[name] = value
+    def decl_enumeration(self, req):
+        enum, name, value = req.split()[1:]
+        self.add_enumeration(enum, name, int(value, 0))
+    def decl_enumeration_range(self, req):
+        enum, name, value, count = req.split()[1:]
+        self.add_enumeration(enum, name, (int(value, 0), int(count, 0)))
+    def decl_static_str(self, req):
+        msg = req.split(None, 1)[1]
+        if msg not in self.static_strings:
+            self.static_strings.append(msg)
+    def update_data_dictionary(self, data):
+        for i, s in enumerate(self.static_strings):
+            self.add_enumeration("static_string_id", s, i + STATIC_STRING_MIN)
+        data['enumerations'] = self.enumerations
+    def generate_code(self, options):
+        code = []
+        for i, s in enumerate(self.static_strings):
+            code.append('    if (__builtin_strcmp(str, "%s") == 0)\n'
+                        '        return %d;\n' % (s, i + STATIC_STRING_MIN))
+        fmt = """
+uint8_t __always_inline
+ctr_lookup_static_string(const char *str)
+{
+    %s
+    return 0xff;
+}
+"""
+        return fmt % ("".join(code).strip(),)
+
+HandlerEnumerations = HandleEnumerations()
+Handlers.append(HandlerEnumerations)
+
+
+######################################################################
+# Constants
+######################################################################
+
+# Allow adding build time constants to the data dictionary
+class HandleConstants:
+    def __init__(self):
+        self.constants = {}
+        self.ctr_dispatch = {
+            'DECL_CONSTANT': self.decl_constant,
+            'DECL_CONSTANT_STR': self.decl_constant_str,
+        }
+    def set_value(self, name, value):
+        if name in self.constants and self.constants[name] != value:
+            error("Conflicting definition for constant '%s'" % name)
+        self.constants[name] = value
+    def decl_constant(self, req):
+        name, value = req.split()[1:]
+        self.set_value(name, int(value, 0))
+    def decl_constant_str(self, req):
+        name, value = req.split(None, 2)[1:]
+        value = value.strip()
+        if value.startswith('"') and value.endswith('"'):
+            value = value[1:-1]
+        self.set_value(name, value)
+    def update_data_dictionary(self, data):
+        data['config'] = self.constants
+    def generate_code(self, options):
+        return ""
+
+HandlerConstants = HandleConstants()
+Handlers.append(HandlerConstants)
+
+
+######################################################################
+# Initial pins
+######################################################################
+
+class HandleInitialPins:
+    def __init__(self):
+        self.initial_pins = []
+        self.ctr_dispatch = { 'DECL_INITIAL_PINS': self.decl_initial_pins }
+    def decl_initial_pins(self, req):
+        pins = req.split(None, 1)[1].strip()
+        if pins.startswith('"') and pins.endswith('"'):
+            pins = pins[1:-1]
+        if pins:
+            self.initial_pins = [p.strip() for p in pins.split(',')]
+            HandlerConstants.decl_constant_str(
+                "_DECL_CONSTANT_STR INITIAL_PINS "
+                + ','.join(self.initial_pins))
+    def update_data_dictionary(self, data):
+        pass
+    def map_pins(self):
+        if not self.initial_pins:
+            return []
+        mp = msgproto.MessageParser()
+        mp.fill_enumerations(HandlerEnumerations.enumerations)
+        pinmap = mp.get_enumerations().get('pin', {})
+        out = []
+        for p in self.initial_pins:
+            flag = "IP_OUT_HIGH"
+            if p.startswith('!'):
+                flag = "0"
+                p = p[1:].strip()
+            if p not in pinmap:
+                error("Unknown initial pin '%s'" % (p,))
+            out.append("\n    {%d, %s}, // %s" % (pinmap[p], flag, p))
+        return out
+    def generate_code(self, options):
+        out = self.map_pins()
+        fmt = """
+const struct initial_pin_s initial_pins[] PROGMEM = {%s
+};
+const int initial_pins_size PROGMEM = ARRAY_SIZE(initial_pins);
+"""
+        return fmt % (''.join(out),)
+
+Handlers.append(HandleInitialPins())
+
+
+######################################################################
+# ARM IRQ vector table generation
+######################################################################
+
+# Create ARM IRQ vector table from interrupt handler declarations
+class Handle_arm_irq:
+    def __init__(self):
+        self.irqs = {}
+        self.ctr_dispatch = { 'DECL_ARMCM_IRQ': self.decl_armcm_irq }
+    def decl_armcm_irq(self, req):
+        func, num = req.split()[1:]
+        num = int(num, 0)
+        if num in self.irqs and self.irqs[num] != func:
+            error("Conflicting IRQ definition %d (old %s new %s)"
+                  % (num, self.irqs[num], func))
+        self.irqs[num] = func
+    def update_data_dictionary(self, data):
+        pass
+    def generate_code(self, options):
+        armcm_offset = 16
+        if 1 - armcm_offset not in self.irqs:
+            # The ResetHandler was not defined - don't build VectorTable
+            return ""
+        max_irq = max(self.irqs.keys())
+        table = ["    DefaultHandler,\n"] * (max_irq + armcm_offset + 1)
+        defs = []
+        for num, func in self.irqs.items():
+            if num < 1 - armcm_offset:
+                error("Invalid IRQ %d (%s)" % (num, func))
+            defs.append("extern void %s(void);\n" % (func,))
+            table[num + armcm_offset] = "    %s,\n" % (func,)
+        table[0] = "    &_stack_end,\n"
+        fmt = """
+extern void DefaultHandler(void);
+extern uint32_t _stack_end;
+%s
+const void *VectorTable[] __visible __section(".vector_table") = {
+%s};
+"""
+        return fmt % (''.join(defs), ''.join(table))
+
+Handlers.append(Handle_arm_irq())
+
+
+######################################################################
+# Wire protocol commands and responses
+######################################################################
+
+# Dynamic command and response registration
+class HandleCommandGeneration:
+    def __init__(self):
+        self.commands = {}
+        self.encoders = []
+        self.msg_to_id = dict(msgproto.DefaultMessages)
+        self.messages_by_name = { m.split()[0]: m for m in self.msg_to_id }
+        self.all_param_types = {}
+        self.ctr_dispatch = {
+            'DECL_COMMAND_FLAGS': self.decl_command,
+            '_DECL_ENCODER': self.decl_encoder,
+            '_DECL_OUTPUT': self.decl_output
+        }
+    def decl_command(self, req):
+        funcname, flags, msgname = req.split()[1:4]
+        if msgname in self.commands:
+            error("Multiple definitions for command '%s'" % msgname)
+        self.commands[msgname] = (funcname, flags, msgname)
+        msg = req.split(None, 3)[3]
+        m = self.messages_by_name.get(msgname)
+        if m is not None and m != msg:
+            error("Conflicting definition for command '%s'" % msgname)
+        self.messages_by_name[msgname] = msg
+    def decl_encoder(self, req):
+        msg = req.split(None, 1)[1]
+        msgname = msg.split()[0]
+        m = self.messages_by_name.get(msgname)
+        if m is not None and m != msg:
+            error("Conflicting definition for message '%s'" % msgname)
+        self.messages_by_name[msgname] = msg
+        self.encoders.append((msgname, msg))
+    def decl_output(self, req):
+        msg = req.split(None, 1)[1]
+        self.encoders.append((None, msg))
+    def create_message_ids(self):
+        # Create unique ids for each message type
+        msgid = max(self.msg_to_id.values())
+        mlist = list(self.commands.keys()) + [m for n, m in self.encoders]
+        for msgname in mlist:
+            msg = self.messages_by_name.get(msgname, msgname)
+            if msg not in self.msg_to_id:
+                msgid += 1
+                self.msg_to_id[msg] = msgid
+        if msgid >= 128:
+            # The mcu currently assumes all message ids encode to one byte
+            error("Too many message ids")
+    def update_data_dictionary(self, data):
+        # Handle message ids over 96 (they are decoded as negative numbers)
+        msg_to_tag = {msg: msgid if msgid < 96 else msgid - 128
+                      for msg, msgid in self.msg_to_id.items()}
+        command_tags = [msg_to_tag[msg]
+                        for msgname, msg in self.messages_by_name.items()
+                        if msgname in self.commands]
+        response_tags = [msg_to_tag[msg]
+                         for msgname, msg in self.messages_by_name.items()
+                         if msgname not in self.commands]
+        data['commands'] = { msg: msgtag for msg, msgtag in msg_to_tag.items()
+                             if msgtag in command_tags }
+        data['responses'] = { msg: msgtag for msg, msgtag in msg_to_tag.items()
+                              if msgtag in response_tags }
+        output = {msg: msgtag for msg, msgtag in msg_to_tag.items()
+                  if msgtag not in command_tags and msgtag not in response_tags}
+        if output:
+            data['output'] = output
+    def build_parser(self, msgid, msgformat, msgtype):
+        if msgtype == "output":
+            param_types = msgproto.lookup_output_params(msgformat)
+            comment = "Output: " + msgformat
+        else:
+            param_types = [t for name, t in msgproto.lookup_params(msgformat)]
+            comment = msgformat
+        params = '0'
+        types = tuple([t.__class__.__name__ for t in param_types])
+        if types:
+            paramid = self.all_param_types.get(types)
+            if paramid is None:
+                paramid = len(self.all_param_types)
+                self.all_param_types[types] = paramid
+            params = 'command_parameters%d' % (paramid,)
+        out = """
+    // %s
+    .msg_id=%d,
+    .num_params=%d,
+    .param_types = %s,
+""" % (comment, msgid, len(types), params)
+        if msgtype == 'response':
+            num_args = (len(types) + types.count('PT_progmem_buffer')
+                        + types.count('PT_buffer'))
+            out += "    .num_args=%d," % (num_args,)
+        else:
+            max_size = min(msgproto.MESSAGE_MAX,
+                           (msgproto.MESSAGE_MIN + 1
+                            + sum([t.max_length for t in param_types])))
+            out += "    .max_size=%d," % (max_size,)
+        return out
+    def generate_responses_code(self):
+        encoder_defs = []
+        output_code = []
+        encoder_code = []
+        did_output = {}
+        for msgname, msg in self.encoders:
+            msgid = self.msg_to_id[msg]
+            if msgid in did_output:
+                continue
+            did_output[msgid] = True
+            code = ('    if (__builtin_strcmp(str, "%s") == 0)\n'
+                    '        return &command_encoder_%s;\n' % (msg, msgid))
+            if msgname is None:
+                parsercode = self.build_parser(msgid, msg, 'output')
+                output_code.append(code)
+            else:
+                parsercode = self.build_parser(msgid, msg, 'command')
+                encoder_code.append(code)
+            encoder_defs.append(
+                "const struct command_encoder command_encoder_%s PROGMEM = {"
+                "    %s\n};\n" % (
+                    msgid, parsercode))
+        fmt = """
+%s
+
+const __always_inline struct command_encoder *
+ctr_lookup_encoder(const char *str)
+{
+    %s
+    return NULL;
+}
+
+const __always_inline struct command_encoder *
+ctr_lookup_output(const char *str)
+{
+    %s
+    return NULL;
+}
+"""
+        return fmt % ("".join(encoder_defs).strip(),
+                      "".join(encoder_code).strip(),
+                      "".join(output_code).strip())
+    def generate_commands_code(self):
+        cmd_by_id = {
+            self.msg_to_id[self.messages_by_name.get(msgname, msgname)]: cmd
+            for msgname, cmd in self.commands.items()
+        }
+        max_cmd_msgid = max(cmd_by_id.keys())
+        index = []
+        externs = {}
+        for msgid in range(max_cmd_msgid+1):
+            if msgid not in cmd_by_id:
+                index.append(" {\n},")
+                continue
+            funcname, flags, msgname = cmd_by_id[msgid]
+            msg = self.messages_by_name[msgname]
+            externs[funcname] = 1
+            parsercode = self.build_parser(msgid, msg, 'response')
+            index.append(" {%s\n    .flags=%s,\n    .func=%s\n}," % (
+                parsercode, flags, funcname))
+        index = "".join(index).strip()
+        externs = "\n".join(["extern void "+funcname+"(uint32_t*);"
+                             for funcname in sorted(externs)])
+        fmt = """
+%s
+
+const struct command_parser command_index[] PROGMEM = {
+%s
+};
+
+const uint8_t command_index_size PROGMEM = ARRAY_SIZE(command_index);
+"""
+        return fmt % (externs, index)
+    def generate_param_code(self):
+        sorted_param_types = sorted(
+            [(i, a) for a, i in self.all_param_types.items()])
+        params = ['']
+        for paramid, argtypes in sorted_param_types:
+            params.append(
+                'static const uint8_t command_parameters%d[] PROGMEM = {\n'
+                '    %s };' % (
+                    paramid, ', '.join(argtypes),))
+        params.append('')
+        return "\n".join(params)
+    def generate_code(self, options):
+        self.create_message_ids()
+        parsercode = self.generate_responses_code()
+        cmdcode = self.generate_commands_code()
+        paramcode = self.generate_param_code()
+        return paramcode + parsercode + cmdcode
+
+Handlers.append(HandleCommandGeneration())
+
+
+######################################################################
+# Version generation
+######################################################################
+
+# Run program and return the specified output
+def check_output(prog):
+    logging.debug("Running %s" % (repr(prog),))
+    try:
+        process = subprocess.Popen(shlex.split(prog), stdout=subprocess.PIPE)
+        output = process.communicate()[0]
+        retcode = process.poll()
+    except OSError:
+        logging.debug("Exception on run: %s" % (traceback.format_exc(),))
+        return ""
+    logging.debug("Got (code=%s): %s" % (retcode, repr(output)))
+    if retcode:
+        return ""
+    try:
+        return str(output.decode('utf8'))
+    except UnicodeError:
+        logging.debug("Exception on decode: %s" % (traceback.format_exc(),))
+        return ""
+
+# Obtain version info from "git" program
+def git_version():
+    if not os.path.exists('.git'):
+        logging.debug("No '.git' file/directory found")
+        return ""
+    ver = check_output("git describe --always --tags --long --dirty").strip()
+    logging.debug("Got git version: %s" % (repr(ver),))
+    return ver
+
+def build_version(extra, cleanbuild):
+    version = git_version()
+    if not version:
+        cleanbuild = False
+        version = "?"
+    elif 'dirty' in version:
+        cleanbuild = False
+    if not cleanbuild:
+        btime = time.strftime("%Y%m%d_%H%M%S")
+        hostname = socket.gethostname()
+        version = "%s-%s-%s" % (version, btime, hostname)
+    return version + extra
+
+# Run "tool --version" for each specified tool and extract versions
+def tool_versions(tools):
+    tools = [t.strip() for t in tools.split(';')]
+    versions = ['', '']
+    success = 0
+    for tool in tools:
+        # Extract first line from "tool --version" output
+        verstr = check_output("%s --version" % (tool,)).split('\n')[0]
+        # Check if this tool looks like a binutils program
+        isbinutils = 0
+        if verstr.startswith('GNU '):
+            isbinutils = 1
+            verstr = verstr[4:]
+        # Extract version information and exclude program name
+        if ' ' not in verstr:
+            continue
+        prog, ver = verstr.split(' ', 1)
+        if not prog or not ver:
+            continue
+        # Check for any version conflicts
+        if versions[isbinutils] and versions[isbinutils] != ver:
+            logging.debug("Mixed version %s vs %s" % (
+                repr(versions[isbinutils]), repr(ver)))
+            versions[isbinutils] = "mixed"
+            continue
+        versions[isbinutils] = ver
+        success += 1
+    cleanbuild = versions[0] and versions[1] and success == len(tools)
+    return cleanbuild, "gcc: %s binutils: %s" % (versions[0], versions[1])
+
+# Add version information to the data dictionary
+class HandleVersions:
+    def __init__(self):
+        self.ctr_dispatch = {}
+        self.toolstr = self.version = ""
+    def update_data_dictionary(self, data):
+        data['version'] = self.version
+        data['build_versions'] = self.toolstr
+    def generate_code(self, options):
+        cleanbuild, self.toolstr = tool_versions(options.tools)
+        self.version = build_version(options.extra, cleanbuild)
+        sys.stdout.write("Version: %s\n" % (self.version,))
+        return "\n// version: %s\n// build_versions: %s\n" % (
+            self.version, self.toolstr)
+
+Handlers.append(HandleVersions())
+
+
+######################################################################
+# Identify data dictionary generation
+######################################################################
+
+# Automatically generate the wire protocol data dictionary
+class HandleIdentify:
+    def __init__(self):
+        self.ctr_dispatch = {}
+    def update_data_dictionary(self, data):
+        pass
+    def generate_code(self, options):
+        # Generate data dictionary
+        data = {}
+        for h in Handlers:
+            h.update_data_dictionary(data)
+        datadict = json.dumps(data, separators=(',', ':'), sort_keys=True)
+
+        # Write data dictionary
+        if options.write_dictionary:
+            f = open(options.write_dictionary, 'w')
+            f.write(datadict)
+            f.close()
+
+        # Format compressed info into C code
+        zdatadict = bytearray(zlib.compress(datadict.encode(), 9))
+        out = []
+        for i in range(len(zdatadict)):
+            if i % 8 == 0:
+                out.append('\n   ')
+            out.append(" 0x%02x," % (zdatadict[i],))
+        fmt = """
+const uint8_t command_identify_data[] PROGMEM = {%s
+};
+
+// Identify size = %d (%d uncompressed)
+const uint32_t command_identify_size PROGMEM
+    = ARRAY_SIZE(command_identify_data);
+"""
+        return fmt % (''.join(out), len(zdatadict), len(datadict))
+
+Handlers.append(HandleIdentify())
+
+
+######################################################################
+# Main code
+######################################################################
+
+def main():
+    usage = "%prog [options] <cmd section file> <output.c>"
+    opts = optparse.OptionParser(usage)
+    opts.add_option("-e", "--extra", dest="extra", default="",
+                    help="extra version string to append to version")
+    opts.add_option("-d", dest="write_dictionary",
+                    help="file to write mcu protocol dictionary")
+    opts.add_option("-t", "--tools", dest="tools", default="",
+                    help="list of build programs to extract version from")
+    opts.add_option("-v", action="store_true", dest="verbose",
+                    help="enable debug messages")
+
+    options, args = opts.parse_args()
+    if len(args) != 2:
+        opts.error("Incorrect arguments")
+    incmdfile, outcfile = args
+    if options.verbose:
+        logging.basicConfig(level=logging.DEBUG)
+
+    # Parse request file
+    ctr_dispatch = { k: v for h in Handlers for k, v in h.ctr_dispatch.items() }
+    f = open(incmdfile, 'r')
+    data = f.read()
+    f.close()
+    for req in data.split('\n'):
+        req = req.lstrip()
+        if not req:
+            continue
+        cmd = req.split()[0]
+        if cmd not in ctr_dispatch:
+            error("Unknown build time command '%s'" % cmd)
+        ctr_dispatch[cmd](req)
+
+    # Write output
+    code = "".join([FILEHEADER] + [h.generate_code(options) for h in Handlers])
+    f = open(outcfile, 'w')
+    f.write(code)
+    f.close()
+
+if __name__ == '__main__':
+    main()

scripts/calibrate_shaper.py

@@ -0,0 +1,174 @@
+#!/usr/bin/env python3
+# Shaper auto-calibration script
+#
+# Copyright (C) 2020  Dmitry Butyugin <dmbutyugin@google.com>
+# Copyright (C) 2020  Kevin O'Connor <kevin@koconnor.net>
+#
+# This file may be distributed under the terms of the GNU GPLv3 license.
+from __future__ import print_function
+import importlib, optparse, os, sys
+from textwrap import wrap
+import numpy as np, matplotlib
+sys.path.append(os.path.join(os.path.dirname(os.path.realpath(__file__)),
+                             '..', 'klippy'))
+shaper_calibrate = importlib.import_module('.shaper_calibrate', 'extras')
+
+MAX_TITLE_LENGTH=65
+
+def parse_log(logname):
+    with open(logname) as f:
+        for header in f:
+            if not header.startswith('#'):
+                break
+        if not header.startswith('freq,psd_x,psd_y,psd_z,psd_xyz'):
+            # Raw accelerometer data
+            return np.loadtxt(logname, comments='#', delimiter=',')
+    # Parse power spectral density data
+    data = np.loadtxt(logname, skiprows=1, comments='#', delimiter=',')
+    calibration_data = shaper_calibrate.CalibrationData(
+            freq_bins=data[:,0], psd_sum=data[:,4],
+            psd_x=data[:,1], psd_y=data[:,2], psd_z=data[:,3])
+    calibration_data.set_numpy(np)
+    # If input shapers are present in the CSV file, the frequency
+    # response is already normalized to input frequencies
+    if 'mzv' not in header:
+        calibration_data.normalize_to_frequencies()
+    return calibration_data
+
+######################################################################
+# Shaper calibration
+######################################################################
+
+# Find the best shaper parameters
+def calibrate_shaper(datas, csv_output, max_smoothing):
+    helper = shaper_calibrate.ShaperCalibrate(printer=None)
+    if isinstance(datas[0], shaper_calibrate.CalibrationData):
+        calibration_data = datas[0]
+        for data in datas[1:]:
+            calibration_data.add_data(data)
+    else:
+        # Process accelerometer data
+        calibration_data = helper.process_accelerometer_data(datas[0])
+        for data in datas[1:]:
+            calibration_data.add_data(helper.process_accelerometer_data(data))
+        calibration_data.normalize_to_frequencies()
+    shaper, all_shapers = helper.find_best_shaper(
+            calibration_data, max_smoothing, print)
+    print("Recommended shaper is %s @ %.1f Hz" % (shaper.name, shaper.freq))
+    if csv_output is not None:
+        helper.save_calibration_data(
+                csv_output, calibration_data, all_shapers)
+    return shaper.name, all_shapers, calibration_data
+
+######################################################################
+# Plot frequency response and suggested input shapers
+######################################################################
+
+def plot_freq_response(lognames, calibration_data, shapers,
+                       selected_shaper, max_freq):
+    freqs = calibration_data.freq_bins
+    psd = calibration_data.psd_sum[freqs <= max_freq]
+    px = calibration_data.psd_x[freqs <= max_freq]
+    py = calibration_data.psd_y[freqs <= max_freq]
+    pz = calibration_data.psd_z[freqs <= max_freq]
+    freqs = freqs[freqs <= max_freq]
+
+    fontP = matplotlib.font_manager.FontProperties()
+    fontP.set_size('x-small')
+
+    fig, ax = matplotlib.pyplot.subplots()
+    ax.set_xlabel('Frequency, Hz')
+    ax.set_xlim([0, max_freq])
+    ax.set_ylabel('Power spectral density')
+
+    ax.plot(freqs, psd, label='X+Y+Z', color='purple')
+    ax.plot(freqs, px, label='X', color='red')
+    ax.plot(freqs, py, label='Y', color='green')
+    ax.plot(freqs, pz, label='Z', color='blue')
+
+    title = "Frequency response and shapers (%s)" % (', '.join(lognames))
+    ax.set_title("\n".join(wrap(title, MAX_TITLE_LENGTH)))
+    ax.xaxis.set_minor_locator(matplotlib.ticker.MultipleLocator(5))
+    ax.yaxis.set_minor_locator(matplotlib.ticker.AutoMinorLocator())
+    ax.ticklabel_format(axis='y', style='scientific', scilimits=(0,0))
+    ax.grid(which='major', color='grey')
+    ax.grid(which='minor', color='lightgrey')
+
+    ax2 = ax.twinx()
+    ax2.set_ylabel('Shaper vibration reduction (ratio)')
+    best_shaper_vals = None
+    for shaper in shapers:
+        label = "%s (%.1f Hz, vibr=%.1f%%, sm~=%.2f, accel<=%.f)" % (
+                shaper.name.upper(), shaper.freq,
+                shaper.vibrs * 100., shaper.smoothing,
+                round(shaper.max_accel / 100.) * 100.)
+        linestyle = 'dotted'
+        if shaper.name == selected_shaper:
+            linestyle = 'dashdot'
+            best_shaper_vals = shaper.vals
+        ax2.plot(freqs, shaper.vals, label=label, linestyle=linestyle)
+    ax.plot(freqs, psd * best_shaper_vals,
+            label='After\nshaper', color='cyan')
+    # A hack to add a human-readable shaper recommendation to legend
+    ax2.plot([], [], ' ',
+             label="Recommended shaper: %s" % (selected_shaper.upper()))
+
+    ax.legend(loc='upper left', prop=fontP)
+    ax2.legend(loc='upper right', prop=fontP)
+
+    fig.tight_layout()
+    return fig
+
+######################################################################
+# Startup
+######################################################################
+
+def setup_matplotlib(output_to_file):
+    global matplotlib
+    if output_to_file:
+        matplotlib.rcParams.update({'figure.autolayout': True})
+        matplotlib.use('Agg')
+    import matplotlib.pyplot, matplotlib.dates, matplotlib.font_manager
+    import matplotlib.ticker
+
+def main():
+    # Parse command-line arguments
+    usage = "%prog [options] <logs>"
+    opts = optparse.OptionParser(usage)
+    opts.add_option("-o", "--output", type="string", dest="output",
+                    default=None, help="filename of output graph")
+    opts.add_option("-c", "--csv", type="string", dest="csv",
+                    default=None, help="filename of output csv file")
+    opts.add_option("-f", "--max_freq", type="float", default=200.,
+                    help="maximum frequency to graph")
+    opts.add_option("-s", "--max_smoothing", type="float", default=None,
+                    help="maximum shaper smoothing to allow")
+    options, args = opts.parse_args()
+    if len(args) < 1:
+        opts.error("Incorrect number of arguments")
+    if options.max_smoothing is not None and options.max_smoothing < 0.05:
+        opts.error("Too small max_smoothing specified (must be at least 0.05)")
+
+    # Parse data
+    datas = [parse_log(fn) for fn in args]
+
+    # Calibrate shaper and generate outputs
+    selected_shaper, shapers, calibration_data = calibrate_shaper(
+            datas, options.csv, options.max_smoothing)
+
+    if not options.csv or options.output:
+        # Draw graph
+        setup_matplotlib(options.output is not None)
+
+        fig = plot_freq_response(args, calibration_data, shapers,
+                                 selected_shaper, options.max_freq)
+
+        # Show graph
+        if options.output is None:
+            matplotlib.pyplot.show()
+        else:
+            fig.set_size_inches(8, 6)
+            fig.savefig(options.output)
+
+if __name__ == '__main__':
+    main()

scripts/canbus_query.py

@@ -0,0 +1,64 @@
+#!/usr/bin/env python2
+# Tool to query CAN bus uuids
+#
+# Copyright (C) 2021  Kevin O'Connor <kevin@koconnor.net>
+#
+# This file may be distributed under the terms of the GNU GPLv3 license.
+import sys, os, optparse, time
+import can
+
+CANBUS_ID_ADMIN = 0x3f0
+CMD_QUERY_UNASSIGNED = 0x00
+RESP_NEED_NODEID = 0x20
+CMD_SET_KLIPPER_NODEID = 0x01
+CMD_SET_CANBOOT_NODEID = 0x11
+
+def query_unassigned(canbus_iface):
+    # Open CAN socket
+    filters = [{"can_id": CANBUS_ID_ADMIN + 1, "can_mask": 0x7ff,
+                "extended": False}]
+    bus = can.interface.Bus(channel=canbus_iface, can_filters=filters,
+                            bustype='socketcan')
+    # Send query
+    msg = can.Message(arbitration_id=CANBUS_ID_ADMIN,
+                      data=[CMD_QUERY_UNASSIGNED], is_extended_id=False)
+    bus.send(msg)
+    # Read responses
+    found_ids = {}
+    start_time = curtime = time.time()
+    while 1:
+        tdiff = start_time + 2. - curtime
+        if tdiff <= 0.:
+            break
+        msg = bus.recv(tdiff)
+        curtime = time.time()
+        if (msg is None or msg.arbitration_id != CANBUS_ID_ADMIN + 1
+            or msg.dlc < 7 or msg.data[0] != RESP_NEED_NODEID):
+            continue
+        uuid = sum([v << ((5-i)*8) for i, v in enumerate(msg.data[1:7])])
+        if uuid in found_ids:
+            continue
+        found_ids[uuid] = 1
+        AppNames = {
+            CMD_SET_KLIPPER_NODEID: "Klipper",
+            CMD_SET_CANBOOT_NODEID: "CanBoot"
+        }
+        app_id = CMD_SET_KLIPPER_NODEID
+        if msg.dlc > 7:
+            app_id = msg.data[7]
+        app_name = AppNames.get(app_id, "Unknown")
+        sys.stdout.write("Found canbus_uuid=%012x, Application: %s\n"
+                         % (uuid, app_name))
+    sys.stdout.write("Total %d uuids found\n" % (len(found_ids,)))
+
+def main():
+    usage = "%prog [options] <can interface>"
+    opts = optparse.OptionParser(usage)
+    options, args = opts.parse_args()
+    if len(args) != 1:
+        opts.error("Incorrect number of arguments")
+    canbus_iface = args[0]
+    query_unassigned(canbus_iface)
+
+if __name__ == '__main__':
+    main()

scripts/check-gcc.sh

@@ -0,0 +1,18 @@
+#!/bin/sh
+# This script checks for a broken Ubuntu 18.04 arm-none-eabi-gcc compile
+
+f1="$1"
+f2="$2"
+
+s1=`readelf -A "$f1" | grep "Tag_ARM_ISA_use"`
+s2=`readelf -A "$f2" | grep "Tag_ARM_ISA_use"`
+
+if [ "$s1" != "$s2" ]; then
+    echo ""
+    echo "ERROR: The compiler failed to correctly compile Klipper"
+    echo "It will be necessary to upgrade the compiler"
+    echo "See: https://bugs.launchpad.net/ubuntu/+source/newlib/+bug/1767223"
+    echo ""
+    rm -f "$f1"
+    exit 99
+fi

scripts/check_whitespace.py

@@ -0,0 +1,70 @@
+#!/usr/bin/env python3
+# Check files for whitespace problems
+#
+# Copyright (C) 2018  Kevin O'Connor <kevin@koconnor.net>
+#
+# This file may be distributed under the terms of the GNU GPLv3 license.
+import sys, os.path, unicodedata
+
+HaveError = False
+
+def report_error(filename, lineno, msg):
+    global HaveError
+    if not HaveError:
+        sys.stderr.write("\n\nERROR:\nERROR: White space errors\nERROR:\n")
+    HaveError = True
+    sys.stderr.write("%s:%d: %s\n" % (filename, lineno + 1, msg))
+
+def check_file(filename):
+    # Open and read file
+    try:
+        f = open(filename, 'rb')
+        data = f.read()
+        f.close()
+    except IOError:
+        return
+    if not data:
+        # Empty files are okay
+        return
+    # Do checks
+    is_source_code = any([filename.endswith(s) for s in ['.c', '.h', '.py']])
+    lineno = 0
+    for lineno, line in enumerate(data.split(b'\n')):
+        # Verify line is valid utf-8
+        try:
+            line = line.decode('utf-8')
+        except UnicodeDecodeError:
+            report_error(filename, lineno, "Found non utf-8 character")
+            continue
+        # Check for control characters
+        for c in line:
+            if unicodedata.category(c).startswith('C'):
+                char_name = repr(c)
+                if c == '\t':
+                    if os.path.basename(filename).lower() == 'makefile':
+                        continue
+                    char_name = 'tab'
+                report_error(filename, lineno, "Invalid %s character" % (
+                    char_name,))
+                break
+        # Check for trailing space
+        if line.endswith(' ') or line.endswith('\t'):
+            report_error(filename, lineno, "Line has trailing spaces")
+        # Check for more than 80 characters
+        if is_source_code and len(line) > 80:
+            report_error(filename, lineno, "Line longer than 80 characters")
+    if not data.endswith(b'\n'):
+        report_error(filename, lineno, "No newline at end of file")
+    if data.endswith(b'\n\n'):
+        report_error(filename, lineno, "Extra newlines at end of file")
+
+def main():
+    files = sys.argv[1:]
+    for filename in files:
+        check_file(filename)
+    if HaveError:
+        sys.stderr.write("\n\n")
+        sys.exit(-1)
+
+if __name__ == '__main__':
+    main()

scripts/check_whitespace.sh

@@ -0,0 +1,18 @@
+#!/bin/bash
+# Script to check whitespace in Klipper source code.
+
+# Find SRCDIR from the pathname of this script
+SRCDIR="$( cd "$( dirname "${BASH_SOURCE[0]}" )"/.. && pwd )"
+cd ${SRCDIR}
+
+# Run whitespace tool on all source files
+WS_DIRS="config/ docs/ klippy/ scripts/ src/ test/"
+WS_EXCLUDE="-path scripts/kconfig -prune"
+WS_FILES="-o -iname '*.[csh]' -o -name '*.py' -o -name '*.sh'"
+WS_FILES="$WS_FILES -o -name '*.md' -o -name '*.cfg' -o -name '*.txt'"
+WS_FILES="$WS_FILES -o -name '*.html' -o -name '*.css'"
+WS_FILES="$WS_FILES -o -name '*.yaml' -o -name '*.yml'"
+WS_FILES="$WS_FILES -o -name '*.css' -o -name '*.yaml' -o -name '*.yml'"
+WS_FILES="$WS_FILES -o -name '*.test' -o -name '*.config'"
+WS_FILES="$WS_FILES -o -iname '*.lds' -o -iname 'Makefile' -o -iname 'Kconfig'"
+eval find $WS_DIRS $WS_EXCLUDE $WS_FILES | xargs ./scripts/check_whitespace.py

scripts/checkstack.py

@@ -0,0 +1,243 @@
+#!/usr/bin/env python2
+# Script that tries to find how much stack space each function in an
+# object is using.
+#
+# Copyright (C) 2015  Kevin O'Connor <kevin@koconnor.net>
+#
+# This file may be distributed under the terms of the GNU GPLv3 license.
+
+# Usage:
+#   avr-objdump -d out/klipper.elf | scripts/checkstack.py
+
+import sys
+import re
+
+# Functions that change stacks
+STACKHOP = []
+# List of functions we can assume are never called.
+IGNORE = []
+
+OUTPUTDESC = """
+#funcname1[preamble_stack_usage,max_usage_with_callers]:
+#    insn_addr:called_function [usage_at_call_point+caller_preamble,total_usage]
+#
+#funcname2[p,m,max_usage_to_yield_point]:
+#    insn_addr:called_function [u+c,t,usage_to_yield_point]
+"""
+
+class function:
+    def __init__(self, funcaddr, funcname):
+        self.funcaddr = funcaddr
+        self.funcname = funcname
+        self.basic_stack_usage = 0
+        self.max_stack_usage = None
+        self.yield_usage = -1
+        self.max_yield_usage = None
+        self.total_calls = 0
+        # called_funcs = [(insnaddr, calladdr, stackusage), ...]
+        self.called_funcs = []
+        self.subfuncs = {}
+    # Update function info with a found "yield" point.
+    def noteYield(self, stackusage):
+        if self.yield_usage < stackusage:
+            self.yield_usage = stackusage
+    # Update function info with a found "call" point.
+    def noteCall(self, insnaddr, calladdr, stackusage):
+        if (calladdr, stackusage) in self.subfuncs:
+            # Already noted a nearly identical call - ignore this one.
+            return
+        self.called_funcs.append((insnaddr, calladdr, stackusage))
+        self.subfuncs[(calladdr, stackusage)] = 1
+
+# Find out maximum stack usage for a function
+def calcmaxstack(info, funcs):
+    if info.max_stack_usage is not None:
+        return
+    info.max_stack_usage = max_stack_usage = info.basic_stack_usage
+    info.max_yield_usage = max_yield_usage = info.yield_usage
+    total_calls = 0
+    seenbefore = {}
+    # Find max of all nested calls.
+    for insnaddr, calladdr, usage in info.called_funcs:
+        callinfo = funcs.get(calladdr)
+        if callinfo is None:
+            continue
+        calcmaxstack(callinfo, funcs)
+        if callinfo.funcname not in seenbefore:
+            seenbefore[callinfo.funcname] = 1
+            total_calls += callinfo.total_calls + 1
+        funcnameroot = callinfo.funcname.split('.')[0]
+        if funcnameroot in IGNORE:
+            # This called function is ignored - don't contribute it to
+            # the max stack.
+            continue
+        totusage = usage + callinfo.max_stack_usage
+        totyieldusage = usage + callinfo.max_yield_usage
+        if funcnameroot in STACKHOP:
+            # Don't count children of this function
+            totusage = totyieldusage = usage
+        if totusage > max_stack_usage:
+            max_stack_usage = totusage
+        if callinfo.max_yield_usage >= 0 and totyieldusage > max_yield_usage:
+            max_yield_usage = totyieldusage
+    info.max_stack_usage = max_stack_usage
+    info.max_yield_usage = max_yield_usage
+    info.total_calls = total_calls
+
+# Try to arrange output so that functions that call each other are
+# near each other.
+def orderfuncs(funcaddrs, availfuncs):
+    l = [(availfuncs[funcaddr].total_calls
+          , availfuncs[funcaddr].funcname, funcaddr)
+         for funcaddr in funcaddrs if funcaddr in availfuncs]
+    l.sort()
+    l.reverse()
+    out = []
+    while l:
+        count, name, funcaddr = l.pop(0)
+        info = availfuncs.get(funcaddr)
+        if info is None:
+            continue
+        calladdrs = [calls[1] for calls in info.called_funcs]
+        del availfuncs[funcaddr]
+        out = out + orderfuncs(calladdrs, availfuncs) + [info]
+    return out
+
+hex_s = r'[0-9a-f]+'
+re_func = re.compile(r'^(?P<funcaddr>' + hex_s + r') <(?P<func>.*)>:$')
+re_asm = re.compile(
+    r'^[ ]*(?P<insnaddr>' + hex_s
+    + r'):\t[^\t]*\t(?P<insn>[^\t]+?)(?P<params>\t[^;]*)?'
+    + r'[ ]*(; (?P<calladdr>0x' + hex_s
+    + r') <(?P<ref>.*)>)?$')
+
+def main():
+    unknownfunc = function(None, "<unknown>")
+    indirectfunc = function(-1, '<indirect>')
+    unknownfunc.max_stack_usage = indirectfunc.max_stack_usage = 0
+    unknownfunc.max_yield_usage = indirectfunc.max_yield_usage = -1
+    funcs = {-1: indirectfunc}
+    funcaddr = None
+    datalines = {}
+    cur = None
+    atstart = 0
+    stackusage = 0
+
+    # Parse input lines
+    for line in sys.stdin.readlines():
+        m = re_func.match(line)
+        if m is not None:
+            # Found function
+            funcaddr = int(m.group('funcaddr'), 16)
+            funcs[funcaddr] = cur = function(funcaddr, m.group('func'))
+            stackusage = 0
+            atstart = 1
+            continue
+        m = re_asm.match(line)
+        if m is None:
+            datalines.setdefault(funcaddr, []).append(line)
+            #print("other", repr(line))
+            continue
+        insn = m.group('insn')
+
+        if insn == 'push':
+            stackusage += 1
+            continue
+        if insn == 'rcall' and m.group('params').strip() == '.+0':
+            stackusage += 2
+            continue
+
+        if atstart:
+            if insn in ['in', 'eor']:
+                continue
+            cur.basic_stack_usage = stackusage
+            atstart = 0
+
+        insnaddr = m.group('insnaddr')
+        calladdr = m.group('calladdr')
+        if calladdr is None:
+            if insn == 'ijmp':
+                # Indirect tail call
+                cur.noteCall(insnaddr, -1, 0)
+            elif insn == 'icall':
+                cur.noteCall(insnaddr, -1, stackusage + 2)
+            else:
+                # misc instruction
+                continue
+        else:
+            # Jump or call insn
+            calladdr = int(calladdr, 16)
+            ref = m.group('ref')
+            if '+' in ref:
+                # Inter-function jump.
+                continue
+            elif insn.startswith('ld') or insn.startswith('st'):
+                # memory access
+                continue
+            elif insn in ('rjmp', 'jmp', 'brne', 'brcs'):
+                # Tail call
+                cur.noteCall(insnaddr, calladdr, 0)
+            elif insn in ('rcall', 'call'):
+                cur.noteCall(insnaddr, calladdr, stackusage + 2)
+            else:
+                print("unknown call", ref)
+                cur.noteCall(insnaddr, calladdr, stackusage)
+        # Reset stack usage to preamble usage
+        stackusage = cur.basic_stack_usage
+
+    # Update for known indirect functions
+    funcsbyname = {}
+    for info in funcs.values():
+        funcnameroot = info.funcname.split('.')[0]
+        funcsbyname[funcnameroot] = info
+    cmdfunc = funcsbyname.get('sched_main')
+    command_index = funcsbyname.get('command_index')
+    if command_index is not None and cmdfunc is not None:
+        for line in datalines[command_index.funcaddr]:
+            parts = line.split()
+            if len(parts) < 9:
+                continue
+            calladdr = int(parts[8]+parts[7], 16) * 2
+            numparams = int(parts[2], 16)
+            stackusage = cmdfunc.basic_stack_usage + 2 + numparams * 4
+            cmdfunc.noteCall(0, calladdr, stackusage)
+            if len(parts) < 17:
+                continue
+            calladdr = int(parts[16]+parts[15], 16) * 2
+            numparams = int(parts[10], 16)
+            stackusage = cmdfunc.basic_stack_usage + 2 + numparams * 4
+            cmdfunc.noteCall(0, calladdr, stackusage)
+    eventfunc = funcsbyname.get('__vector_13', funcsbyname.get('__vector_17'))
+    for funcnameroot, info in funcsbyname.items():
+        if funcnameroot.endswith('_event') and eventfunc is not None:
+            eventfunc.noteCall(0, info.funcaddr, eventfunc.basic_stack_usage+2)
+
+    # Calculate maxstackusage
+    for info in funcs.values():
+        calcmaxstack(info, funcs)
+
+    # Sort functions for output
+    funcinfos = orderfuncs(funcs.keys(), funcs.copy())
+
+    # Show all functions
+    print(OUTPUTDESC)
+    for info in funcinfos:
+        if info.max_stack_usage == 0 and info.max_yield_usage < 0:
+            continue
+        yieldstr = ""
+        if info.max_yield_usage >= 0:
+            yieldstr = ",%d" % info.max_yield_usage
+        print("\n%s[%d,%d%s]:" % (info.funcname, info.basic_stack_usage
+                                  , info.max_stack_usage, yieldstr))
+        for insnaddr, calladdr, stackusage in info.called_funcs:
+            callinfo = funcs.get(calladdr, unknownfunc)
+            yieldstr = ""
+            if callinfo.max_yield_usage >= 0:
+                yieldstr = ",%d" % (stackusage + callinfo.max_yield_usage)
+            print("    %04s:%-40s [%d+%d,%d%s]" % (
+                insnaddr, callinfo.funcname, stackusage
+                , callinfo.basic_stack_usage
+                , stackusage+callinfo.max_stack_usage, yieldstr))
+
+if __name__ == '__main__':
+    main()

scripts/ci-build.sh

@@ -0,0 +1,81 @@
+#!/bin/bash
+# Test script for continuous integration.
+
+# Stop script early on any error; check variables
+set -eu
+
+# Paths to tools installed by ci-install.sh
+MAIN_DIR=${PWD}
+BUILD_DIR=${PWD}/ci_build
+export PATH=${BUILD_DIR}/pru-gcc/bin:${PATH}
+PYTHON=${BUILD_DIR}/python-env/bin/python
+PYTHON2=${BUILD_DIR}/python2-env/bin/python
+
+
+######################################################################
+# Section grouping output message helpers
+######################################################################
+
+start_test()
+{
+    echo "::group::=============== $1 $2"
+    set -x
+}
+
+finish_test()
+{
+    set +x
+    echo "=============== Finished $2"
+    echo "::endgroup::"
+}
+
+
+######################################################################
+# Check for whitespace errors
+######################################################################
+
+start_test check_whitespace "Check whitespace"
+./scripts/check_whitespace.sh
+finish_test check_whitespace "Check whitespace"
+
+
+######################################################################
+# Run compile tests for several different MCU types
+######################################################################
+
+DICTDIR=${BUILD_DIR}/dict
+mkdir -p ${DICTDIR}
+
+for TARGET in test/configs/*.config ; do
+    start_test mcu_compile "$TARGET"
+    make clean
+    make distclean
+    unset CC
+    cp ${TARGET} .config
+    make olddefconfig
+    make V=1
+    size out/*.elf
+    finish_test mcu_compile "$TARGET"
+    cp out/klipper.dict ${DICTDIR}/$(basename ${TARGET} .config).dict
+done
+
+
+######################################################################
+# Verify klippy host software
+######################################################################
+
+start_test klippy "Test klippy import (Python3)"
+$PYTHON klippy/klippy.py --import-test
+finish_test klippy "Test klippy import (Python3)"
+
+start_test klippy "Test klippy import (Python2)"
+$PYTHON2 klippy/klippy.py --import-test
+finish_test klippy "Test klippy import (Python2)"
+
+start_test klippy "Test invoke klippy (Python3)"
+$PYTHON scripts/test_klippy.py -d ${DICTDIR} test/klippy/*.test
+finish_test klippy "Test invoke klippy (Python3)"
+
+start_test klippy "Test invoke klippy (Python2)"
+$PYTHON2 scripts/test_klippy.py -d ${DICTDIR} test/klippy/*.test
+finish_test klippy "Test invoke klippy (Python2)"

scripts/ci-install.sh

@@ -0,0 +1,68 @@
+#!/bin/bash
+# Build setup script for continuous integration testing.
+# See ci-build.sh for the actual test steps.
+
+# Stop script early on any error; check variables; be verbose
+set -eux
+
+MAIN_DIR=${PWD}
+BUILD_DIR=${PWD}/ci_build
+CACHE_DIR=${PWD}/ci_cache
+mkdir -p ${BUILD_DIR} ${CACHE_DIR}
+
+
+######################################################################
+# Install system dependencies
+######################################################################
+
+echo -e "\n\n=============== Install system dependencies\n\n"
+PKGS="virtualenv python-dev libffi-dev build-essential"
+PKGS="${PKGS} gcc-avr avr-libc"
+PKGS="${PKGS} libnewlib-arm-none-eabi gcc-arm-none-eabi binutils-arm-none-eabi"
+PKGS="${PKGS} pv libmpfr-dev libgmp-dev libmpc-dev texinfo bison flex"
+sudo apt-get install ${PKGS}
+
+
+######################################################################
+# Install (or build) pru gcc
+######################################################################
+
+echo -e "\n\n=============== Install embedded pru gcc\n\n"
+PRU_FILE=${CACHE_DIR}/gnupru.tar.gz
+PRU_DIR=${BUILD_DIR}/pru-gcc
+
+if [ ! -f ${PRU_FILE} ]; then
+    cd ${BUILD_DIR}
+    git config --global user.email "you@example.com"
+    git config --global user.name "Your Name"
+    git clone https://github.com/dinuxbg/gnupru -b 2018.03-beta-rc3 --depth 1
+    cd gnupru
+    export PREFIX=${PRU_DIR}
+    ./download-and-patch.sh 2>&1 | pv -nli 30 > ${BUILD_DIR}/gnupru-build.log
+    ./build.sh 2>&1 | pv -nli 30 >> ${BUILD_DIR}/gnupru-build.log
+    cd ${BUILD_DIR}
+    tar cfz ${PRU_FILE} pru-gcc/
+else
+    cd ${BUILD_DIR}
+    tar xfz ${PRU_FILE}
+fi
+
+
+######################################################################
+# Create python3 virtualenv environment
+######################################################################
+
+echo -e "\n\n=============== Install python3 virtualenv\n\n"
+cd ${MAIN_DIR}
+virtualenv -p python3 ${BUILD_DIR}/python-env
+${BUILD_DIR}/python-env/bin/pip install -r ${MAIN_DIR}/scripts/klippy-requirements.txt
+
+
+######################################################################
+# Create python2 virtualenv environment
+######################################################################
+
+echo -e "\n\n=============== Install python2 virtualenv\n\n"
+cd ${MAIN_DIR}
+virtualenv -p python2 ${BUILD_DIR}/python2-env
+${BUILD_DIR}/python2-env/bin/pip install -r ${MAIN_DIR}/scripts/klippy-requirements.txt

scripts/flash-linux.sh

@@ -0,0 +1,26 @@
+#!/bin/bash
+# This script installs the Linux MCU code to /usr/local/bin/
+
+if [ "$EUID" -ne 0 ]; then
+    echo "This script must be run as root"
+    exit -1
+fi
+set -e
+
+# Install new micro-controller code
+echo "Installing micro-controller code to /usr/local/bin/"
+rm -f /usr/local/bin/klipper_mcu
+cp out/klipper.elf /usr/local/bin/klipper_mcu
+sync
+
+# Restart (if system install script present)
+if [ -f /etc/init.d/klipper_pru ]; then
+    echo "Attempting host PRU restart..."
+    service klipper_pru restart
+fi
+
+# Restart (if system install script present)
+if [ -f /etc/init.d/klipper_mcu ]; then
+    echo "Attempting host MCU restart..."
+    service klipper_mcu restart
+fi

scripts/flash-pru.sh

@@ -0,0 +1,20 @@
+#!/bin/bash
+# This script installs the PRU firmware on a beaglebone machine.
+
+if [ "$EUID" -ne 0 ]; then
+    echo "This script must be run as root"
+    exit -1
+fi
+set -e
+
+# Install new firmware
+echo "Installing firmware to /lib/firmware/"
+cp out/pru0.elf /lib/firmware/am335x-pru0-fw
+cp out/pru1.elf /lib/firmware/am335x-pru1-fw
+sync
+
+# Restart (if system install script present)
+if [ -f /etc/init.d/klipper_pru ]; then
+    echo "Attempting PRU restart..."
+    service klipper_pru restart
+fi

scripts/flash-sdcard.sh

@@ -0,0 +1,85 @@
+#!/bin/bash
+#  This script launches flash_sdcard.py, a utitlity that enables
+#  unattended firmware updates on boards with "SD Card" bootloaders
+
+# Non-standard installations may need to change this location
+KLIPPY_ENV="${HOME}/klippy-env/bin/python"
+SRCDIR="$( cd "$( dirname "${BASH_SOURCE[0]}" )"/.. && pwd )"
+KLIPPER_BIN="${SRCDIR}/out/klipper.bin"
+KLIPPER_BIN_DEFAULT=$KLIPPER_BIN
+KLIPPER_DICT_DEFAULT="${SRCDIR}/out/klipper.dict"
+SPI_FLASH="${SRCDIR}/scripts/spi_flash/spi_flash.py"
+BAUD_ARG=""
+# Force script to exit if an error occurs
+set -e
+
+print_help_message()
+{
+    echo "SD Card upload utility for Klipper"
+    echo
+    echo "usage: flash_sdcard.sh [-h] [-l] [-b <baud>] [-f <firmware>] [-d <dictionary>]"
+    echo "                       <device> <board>"
+    echo
+    echo "positional arguments:"
+    echo "  <device>          device serial port"
+    echo "  <board>           board type"
+    echo
+    echo "optional arguments:"
+    echo "  -h                show this message"
+    echo "  -l                list available boards"
+    echo "  -b <baud>         serial baud rate (default is 250000)"
+    echo "  -f <firmware>     path to klipper.bin"
+    echo "  -d <dictionary>   path to klipper.dict for firmware validation"
+}
+
+# Parse command line "optional args"
+while getopts "hlb:f:d:" arg; do
+    case $arg in
+        h)
+            print_help_message
+            exit 0
+            ;;
+        l)
+            ${KLIPPY_ENV} ${SPI_FLASH} -l
+            exit 0
+            ;;
+        b) BAUD_ARG="-b ${OPTARG}";;
+        f) KLIPPER_BIN=$OPTARG;;
+        d) KLIPPER_DICT=$OPTARG;;
+    esac
+done
+
+# Make sure that we have the correct number of positional args
+if [ $(($# - $OPTIND + 1)) -ne 2 ]; then
+    echo "Invalid number of args: $(($# - $OPTIND + 1))"
+    exit -1
+fi
+
+DEVICE=${@:$OPTIND:1}
+BOARD=${@:$OPTIND+1:1}
+
+if [ ! -f $KLIPPER_BIN ]; then
+    echo "No file found at '${KLIPPER_BIN}'"
+    exit -1
+fi
+
+if [ ! -e $DEVICE ]; then
+    echo "No device found at '${DEVICE}'"
+    exit -1
+fi
+
+if [ ! $KLIPPER_DICT ] && [ $KLIPPER_BIN == $KLIPPER_BIN_DEFAULT ] ; then
+    KLIPPER_DICT=$KLIPPER_DICT_DEFAULT
+fi
+
+if [ $KLIPPER_DICT ]; then
+    if [ ! -f $KLIPPER_DICT ]; then
+        echo "No file found at '${KLIPPER_BIN}'"
+        exit -1
+    fi
+    KLIPPER_DICT="-d ${KLIPPER_DICT}"
+fi
+
+# Run Script
+echo "Flashing ${KLIPPER_BIN} to ${DEVICE}"
+${KLIPPY_ENV} ${SPI_FLASH} ${BAUD_ARG} ${KLIPPER_DICT} ${DEVICE} ${BOARD} ${KLIPPER_BIN}

scripts/flash_usb.py

@@ -0,0 +1,380 @@
+#!/usr/bin/env python3
+# Tool to enter a USB bootloader and flash Klipper
+#
+# Copyright (C) 2019  Kevin O'Connor <kevin@koconnor.net>
+#
+# This file may be distributed under the terms of the GNU GPLv3 license.
+import sys, os, re, subprocess, optparse, time, fcntl, termios, struct
+
+class error(Exception):
+    pass
+
+# Attempt to enter bootloader via 1200 baud request
+def enter_bootloader(device):
+    try:
+        f = open(device, 'rb')
+        fd = f.fileno()
+        fcntl.ioctl(fd, termios.TIOCMBIS, struct.pack('I', termios.TIOCM_DTR))
+        t = termios.tcgetattr(fd)
+        t[4] = t[5] = termios.B1200
+        sys.stderr.write("Entering bootloader on %s\n" % (device,))
+        termios.tcsetattr(fd, termios.TCSANOW, t)
+        fcntl.ioctl(fd, termios.TIOCMBIC, struct.pack('I', termios.TIOCM_DTR))
+        f.close()
+    except (IOError, OSError) as e:
+        pass
+
+# Translate a serial device name to a stable serial name in /dev/serial/by-path/
+def translate_serial_to_tty(device):
+    ttyname = os.path.realpath(device)
+    if not os.path.exists('/dev/serial/by-path/'):
+        raise error("Unable to find serial 'by-path' folder")
+    for fname in os.listdir('/dev/serial/by-path/'):
+        fname = '/dev/serial/by-path/' + fname
+        if os.path.realpath(fname) == ttyname:
+            return ttyname, fname
+    return ttyname, ttyname
+
+# Translate a serial device name to a usb path (suitable for dfu-util)
+def translate_serial_to_usb_path(device):
+    realdev = os.path.realpath(device)
+    fname = os.path.basename(realdev)
+    try:
+        lname = os.readlink("/sys/class/tty/" + fname)
+    except OSError as e:
+        raise error("Unable to find tty device")
+    ttypath_r = re.compile(r".*/usb\d+.*/(?P<path>\d+-[0-9.]+):\d+\.\d+/.*")
+    m = ttypath_r.match(lname)
+    if m is None:
+        raise error("Unable to find tty usb device")
+    devpath = os.path.realpath("/sys/class/tty/%s/device" % (fname,))
+    return m.group("path"), devpath
+
+# Wait for a given path to appear
+def wait_path(path, alt_path=None):
+    time.sleep(.100)
+    start_alt_path = None
+    end_time = time.time() + 4.0
+    while 1:
+        time.sleep(0.100)
+        cur_time = time.time()
+        if os.path.exists(path):
+            sys.stderr.write("Device reconnect on %s\n" % (path,))
+            time.sleep(0.100)
+            return path
+        if alt_path is not None and os.path.exists(alt_path):
+            if start_alt_path is None:
+                start_alt_path = cur_time
+                continue
+            if cur_time >= start_alt_path + 0.300:
+                sys.stderr.write("Device reconnect on alt path %s\n" % (
+                    alt_path,))
+                return alt_path
+        if cur_time > end_time:
+            return path
+
+CANBOOT_ID ="1d50:6177"
+
+def detect_canboot(devpath):
+    usbdir = os.path.dirname(devpath)
+    try:
+        with open(os.path.join(usbdir, "idVendor")) as f:
+            vid = f.read().strip().lower()
+        with open(os.path.join(usbdir, "idProduct")) as f:
+            pid = f.read().strip().lower()
+    except Exception:
+        return False
+    usbid = "%s:%s" % (vid, pid)
+    return usbid == CANBOOT_ID
+
+def call_flashcan(device, binfile):
+    try:
+        import serial
+    except ModuleNotFoundError:
+        sys.stderr.write(
+            "Python's pyserial module is required to update. Install\n"
+            "with the following command:\n"
+            "   %s -m pip install pyserial\n\n" % (sys.executable,)
+        )
+        sys.exit(-1)
+    args = [sys.executable, "lib/canboot/flash_can.py", "-d",
+            device, "-f", binfile]
+    sys.stderr.write(" ".join(args) + '\n\n')
+    res = subprocess.call(args)
+    if res != 0:
+        sys.stderr.write("Error running flash_can.py\n")
+        sys.exit(-1)
+
+def flash_canboot(options, binfile):
+    ttyname, pathname = translate_serial_to_tty(options.device)
+    call_flashcan(pathname, binfile)
+
+# Flash via a call to bossac
+def flash_bossac(device, binfile, extra_flags=[]):
+    ttyname, pathname = translate_serial_to_tty(device)
+    enter_bootloader(pathname)
+    pathname = wait_path(pathname, ttyname)
+    baseargs = ["lib/bossac/bin/bossac", "-U", "-p", pathname]
+    args = baseargs + extra_flags + ["-w", binfile, "-v"]
+    sys.stderr.write(" ".join(args) + '\n\n')
+    res = subprocess.call(args)
+    if res != 0:
+        raise error("Error running bossac")
+    if "-R" not in extra_flags:
+        args = baseargs + ["-b", "-R"]
+        try:
+            subprocess.check_output(args, stderr=subprocess.STDOUT)
+            if "-b" not in extra_flags:
+                wait_path(pathname)
+                subprocess.check_output(args, stderr=subprocess.STDOUT)
+        except subprocess.CalledProcessError as e:
+            pass
+
+# Invoke the dfu-util program
+def call_dfuutil(flags, binfile, sudo):
+    args = ["dfu-util"] + flags + ["-D", binfile]
+    if sudo:
+        args.insert(0, "sudo")
+    sys.stderr.write(" ".join(args) + '\n\n')
+    res = subprocess.call(args)
+    if res != 0:
+        raise error("Error running dfu-util")
+
+# Flash via a call to dfu-util
+def flash_dfuutil(device, binfile, extra_flags=[], sudo=True):
+    hexfmt_r = re.compile(r"^[a-fA-F0-9]{4}:[a-fA-F0-9]{4}$")
+    if hexfmt_r.match(device.strip()):
+        call_dfuutil(["-d", ","+device.strip()] + extra_flags, binfile, sudo)
+        return
+    ttyname, serbypath = translate_serial_to_tty(device)
+    buspath, devpath = translate_serial_to_usb_path(device)
+    enter_bootloader(device)
+    pathname = wait_path(devpath)
+    if detect_canboot(devpath):
+        call_flashcan(serbypath, binfile)
+    else:
+        call_dfuutil(["-p", buspath] + extra_flags, binfile, sudo)
+
+def call_hidflash(binfile, sudo):
+    args = ["lib/hidflash/hid-flash", binfile]
+    if sudo:
+        args.insert(0, "sudo")
+    sys.stderr.write(" ".join(args) + '\n\n')
+    res = subprocess.call(args)
+    if res != 0:
+        raise error("Error running hid-flash")
+
+# Flash via call to hid-flash
+def flash_hidflash(device, binfile, sudo=True):
+    hexfmt_r = re.compile(r"^[a-fA-F0-9]{4}:[a-fA-F0-9]{4}$")
+    if hexfmt_r.match(device.strip()):
+        call_hidflash(binfile, sudo)
+        return
+    ttyname, serbypath = translate_serial_to_tty(device)
+    buspath, devpath = translate_serial_to_usb_path(device)
+    enter_bootloader(device)
+    pathname = wait_path(devpath)
+    if detect_canboot(devpath):
+        call_flashcan(serbypath, binfile)
+    else:
+        call_hidflash(binfile, sudo)
+
+# Call Klipper modified "picoboot"
+def call_picoboot(bus, addr, binfile, sudo):
+    args = ["lib/rp2040_flash/rp2040_flash", binfile]
+    if bus is not None:
+        args.extend([bus, addr])
+    if sudo:
+        args.insert(0, "sudo")
+    sys.stderr.write(" ".join(args) + '\n\n')
+    res = subprocess.call(args)
+    if res != 0:
+        raise error("Error running rp2040_flash")
+
+# Flash via Klipper modified "picoboot"
+def flash_picoboot(device, binfile, sudo):
+    buspath, devpath = translate_serial_to_usb_path(device)
+    # We need one level up to get access to busnum/devnum files
+    usbdir = os.path.dirname(devpath)
+    enter_bootloader(device)
+    wait_path(usbdir)
+    with open(usbdir + "/busnum") as f:
+        bus = f.read().strip()
+    with open(usbdir + "/devnum") as f:
+        addr = f.read().strip()
+    call_picoboot(bus, addr, binfile, sudo)
+
+
+######################################################################
+# Device specific helpers
+######################################################################
+
+def flash_atsam3(options, binfile):
+    try:
+        flash_bossac(options.device, binfile, ["-e", "-b"])
+    except error as e:
+        sys.stderr.write("Failed to flash to %s: %s\n" % (
+            options.device, str(e)))
+        sys.exit(-1)
+
+def flash_atsam4(options, binfile):
+    try:
+        flash_bossac(options.device, binfile, ["-e"])
+    except error as e:
+        sys.stderr.write("Failed to flash to %s: %s\n" % (
+            options.device, str(e)))
+        sys.exit(-1)
+
+def flash_atsamd(options, binfile):
+    extra_flags = ["--offset=0x%x" % (options.start,), "-b", "-R"]
+    try:
+        flash_bossac(options.device, binfile, extra_flags)
+    except error as e:
+        sys.stderr.write("Failed to flash to %s: %s\n" % (
+            options.device, str(e)))
+        sys.exit(-1)
+
+SMOOTHIE_HELP = """
+Failed to flash to %s: %s
+
+If flashing Klipper to a Smoothieboard for the first time it may be
+necessary to manually place the board into "bootloader mode" - press
+and hold the "Play button" and then press and release the "Reset
+button".
+
+When a Smoothieboard is in bootloader mode it can be flashed with the
+following command:
+  make flash FLASH_DEVICE=1d50:6015
+
+Alternatively, one can flash a Smoothieboard via SD card - copy the
+"out/klipper.bin" file to a file named "firmware.bin" on an SD card
+and then restart the Smoothieboard with that SD card.
+
+"""
+
+def flash_lpc176x(options, binfile):
+    try:
+        flash_dfuutil(options.device, binfile, [], options.sudo)
+    except error as e:
+        sys.stderr.write(SMOOTHIE_HELP % (options.device, str(e)))
+        sys.exit(-1)
+
+STM32F1_HELP = """
+Failed to flash to %s: %s
+
+If the device is already in bootloader mode it can be flashed with the
+following command:
+  make flash FLASH_DEVICE=1eaf:0003
+  OR
+  make flash FLASH_DEVICE=1209:beba
+
+If attempting to flash via 3.3V serial, then use:
+  make serialflash FLASH_DEVICE=%s
+
+"""
+
+def flash_stm32f1(options, binfile):
+    try:
+        if options.start == 0x8000800:
+            flash_hidflash(options.device, binfile, options.sudo)
+        else:
+            flash_dfuutil(options.device, binfile, ["-R", "-a", "2"],
+                          options.sudo)
+    except error as e:
+        sys.stderr.write(STM32F1_HELP % (
+            options.device, str(e), options.device))
+        sys.exit(-1)
+
+STM32F4_HELP = """
+Failed to flash to %s: %s
+
+If the device is already in bootloader mode it can be flashed with the
+following command:
+  make flash FLASH_DEVICE=0483:df11
+  OR
+  make flash FLASH_DEVICE=1209:beba
+
+If attempting to flash via 3.3V serial, then use:
+  make serialflash FLASH_DEVICE=%s
+
+"""
+
+def flash_stm32f4(options, binfile):
+    start = "0x%x:leave" % (options.start,)
+    try:
+        if options.start == 0x8004000:
+            flash_hidflash(options.device, binfile, options.sudo)
+        else:
+            flash_dfuutil(options.device, binfile,
+                          ["-R", "-a", "0", "-s", start], options.sudo)
+    except error as e:
+        sys.stderr.write(STM32F4_HELP % (
+            options.device, str(e), options.device))
+        sys.exit(-1)
+
+RP2040_HELP = """
+Failed to flash to %s: %s
+
+If the device is already in bootloader mode it can be flashed with the
+following command:
+  make flash FLASH_DEVICE=2e8a:0003
+
+Alternatively, one can flash rp2040 boards like the Pico by manually
+entering bootloader mode(hold bootsel button during powerup), mount the
+device as a usb drive, and copy klipper.uf2 to the device.
+
+"""
+
+def flash_rp2040(options, binfile):
+    try:
+        if options.device.lower() == "2e8a:0003":
+            call_picoboot(None, None, binfile, options.sudo)
+        else:
+            flash_picoboot(options.device, binfile, options.sudo)
+    except error as e:
+        sys.stderr.write(RP2040_HELP % (options.device, str(e)))
+        sys.exit(-1)
+
+MCUTYPES = {
+    'sam3': flash_atsam3, 'sam4': flash_atsam4, 'samd': flash_atsamd,
+    'same70': flash_atsam4, 'lpc176': flash_lpc176x, 'stm32f103': flash_stm32f1,
+    'stm32f4': flash_stm32f4, 'stm32f042': flash_stm32f4,
+    'stm32f072': flash_stm32f4, 'stm32g0b1': flash_stm32f4,
+    'stm32h7': flash_stm32f4, 'rp2040': flash_rp2040
+}
+
+
+######################################################################
+# Startup
+######################################################################
+
+def main():
+    usage = "%prog [options] -t <type> -d <device> <klipper.bin>"
+    opts = optparse.OptionParser(usage)
+    opts.add_option("-t", "--type", type="string", dest="mcutype",
+                    help="micro-controller type")
+    opts.add_option("-d", "--device", type="string", dest="device",
+                    help="serial port device")
+    opts.add_option("-s", "--start", type="int", dest="start",
+                    help="start address in flash")
+    opts.add_option("--no-sudo", action="store_false", dest="sudo",
+                    default=True, help="do not run sudo")
+    options, args = opts.parse_args()
+    if len(args) != 1:
+        opts.error("Incorrect number of arguments")
+    flash_func = None
+    if options.mcutype:
+        for prefix, func in MCUTYPES.items():
+            if options.mcutype.startswith(prefix):
+                flash_func = func
+                break
+    if flash_func is None:
+        opts.error("USB flashing is not supported for MCU '%s'"
+                   % (options.mcutype,))
+    if not options.device:
+        sys.stderr.write("\nPlease specify FLASH_DEVICE\n\n")
+        sys.exit(-1)
+    flash_func(options, args[0])
+
+if __name__ == '__main__':
+    main()

scripts/graph_accelerometer.py

@@ -0,0 +1,259 @@
+#!/usr/bin/env python3
+# Generate adxl345 accelerometer graphs
+#
+# Copyright (C) 2020  Kevin O'Connor <kevin@koconnor.net>
+# Copyright (C) 2020  Dmitry Butyugin <dmbutyugin@google.com>
+#
+# This file may be distributed under the terms of the GNU GPLv3 license.
+import importlib, optparse, os, sys
+from textwrap import wrap
+import numpy as np, matplotlib
+sys.path.append(os.path.join(os.path.dirname(os.path.realpath(__file__)),
+                             '..', 'klippy'))
+shaper_calibrate = importlib.import_module('.shaper_calibrate', 'extras')
+
+MAX_TITLE_LENGTH=65
+
+def parse_log(logname, opts):
+    with open(logname) as f:
+        for header in f:
+            if not header.startswith('#'):
+                break
+        if not header.startswith('freq,psd_x,psd_y,psd_z,psd_xyz'):
+            # Raw accelerometer data
+            return np.loadtxt(logname, comments='#', delimiter=',')
+    # Power spectral density data or shaper calibration data
+    opts.error("File %s does not contain raw accelerometer data and therefore "
+               "is not supported by graph_accelerometer.py script. Please use "
+               "calibrate_shaper.py script to process it instead." % (logname,))
+
+######################################################################
+# Raw accelerometer graphing
+######################################################################
+
+def plot_accel(data, logname):
+    first_time = data[0, 0]
+    times = data[:,0] - first_time
+    fig, axes = matplotlib.pyplot.subplots(nrows=3, sharex=True)
+    axes[0].set_title("\n".join(wrap("Accelerometer data (%s)" % (logname,),
+                                     MAX_TITLE_LENGTH)))
+    axis_names = ['x', 'y', 'z']
+    for i in range(len(axis_names)):
+        avg = data[:,i+1].mean()
+        adata = data[:,i+1] - data[:,i+1].mean()
+        ax = axes[i]
+        ax.plot(times, adata, alpha=0.8)
+        ax.grid(True)
+        ax.set_ylabel('%s accel (%+.3f)\n(mm/s^2)' % (axis_names[i], -avg))
+    axes[-1].set_xlabel('Time (%+.3f)\n(s)' % (-first_time,))
+    fig.tight_layout()
+    return fig
+
+
+######################################################################
+# Frequency graphing
+######################################################################
+
+# Calculate estimated "power spectral density"
+def calc_freq_response(data, max_freq):
+    helper = shaper_calibrate.ShaperCalibrate(printer=None)
+    return helper.process_accelerometer_data(data)
+
+def calc_specgram(data, axis):
+    N = data.shape[0]
+    Fs = N / (data[-1,0] - data[0,0])
+    # Round up to a power of 2 for faster FFT
+    M = 1 << int(.5 * Fs - 1).bit_length()
+    window = np.kaiser(M, 6.)
+    def _specgram(x):
+        return matplotlib.mlab.specgram(
+                x, Fs=Fs, NFFT=M, noverlap=M//2, window=window,
+                mode='psd', detrend='mean', scale_by_freq=False)
+
+    d = {'x': data[:,1], 'y': data[:,2], 'z': data[:,3]}
+    if axis != 'all':
+        pdata, bins, t = _specgram(d[axis])
+    else:
+        pdata, bins, t = _specgram(d['x'])
+        for ax in 'yz':
+            pdata += _specgram(d[ax])[0]
+    return pdata, bins, t
+
+def plot_frequency(datas, lognames, max_freq):
+    calibration_data = calc_freq_response(datas[0], max_freq)
+    for data in datas[1:]:
+        calibration_data.add_data(calc_freq_response(data, max_freq))
+    freqs = calibration_data.freq_bins
+    psd = calibration_data.psd_sum[freqs <= max_freq]
+    px = calibration_data.psd_x[freqs <= max_freq]
+    py = calibration_data.psd_y[freqs <= max_freq]
+    pz = calibration_data.psd_z[freqs <= max_freq]
+    freqs = freqs[freqs <= max_freq]
+
+    fig, ax = matplotlib.pyplot.subplots()
+    ax.set_title("\n".join(wrap(
+        "Frequency response (%s)" % (', '.join(lognames)), MAX_TITLE_LENGTH)))
+    ax.set_xlabel('Frequency (Hz)')
+    ax.set_ylabel('Power spectral density')
+
+    ax.plot(freqs, psd, label='X+Y+Z', alpha=0.6)
+    ax.plot(freqs, px, label='X', alpha=0.6)
+    ax.plot(freqs, py, label='Y', alpha=0.6)
+    ax.plot(freqs, pz, label='Z', alpha=0.6)
+
+    ax.xaxis.set_minor_locator(matplotlib.ticker.AutoMinorLocator())
+    ax.yaxis.set_minor_locator(matplotlib.ticker.AutoMinorLocator())
+    ax.grid(which='major', color='grey')
+    ax.grid(which='minor', color='lightgrey')
+    ax.ticklabel_format(axis='y', style='scientific', scilimits=(0,0))
+
+    fontP = matplotlib.font_manager.FontProperties()
+    fontP.set_size('x-small')
+    ax.legend(loc='best', prop=fontP)
+    fig.tight_layout()
+    return fig
+
+def plot_compare_frequency(datas, lognames, max_freq, axis):
+    fig, ax = matplotlib.pyplot.subplots()
+    ax.set_title('Frequency responses comparison')
+    ax.set_xlabel('Frequency (Hz)')
+    ax.set_ylabel('Power spectral density')
+
+    for data, logname in zip(datas, lognames):
+        calibration_data = calc_freq_response(data, max_freq)
+        freqs = calibration_data.freq_bins
+        psd = calibration_data.get_psd(axis)[freqs <= max_freq]
+        freqs = freqs[freqs <= max_freq]
+        ax.plot(freqs, psd, label="\n".join(wrap(logname, 60)), alpha=0.6)
+
+    ax.xaxis.set_minor_locator(matplotlib.ticker.AutoMinorLocator())
+    ax.yaxis.set_minor_locator(matplotlib.ticker.AutoMinorLocator())
+    ax.grid(which='major', color='grey')
+    ax.grid(which='minor', color='lightgrey')
+    fontP = matplotlib.font_manager.FontProperties()
+    fontP.set_size('x-small')
+    ax.legend(loc='best', prop=fontP)
+    fig.tight_layout()
+    return fig
+
+# Plot data in a "spectrogram colormap"
+def plot_specgram(data, logname, max_freq, axis):
+    pdata, bins, t = calc_specgram(data, axis)
+
+    fig, ax = matplotlib.pyplot.subplots()
+    ax.set_title("\n".join(wrap("Spectrogram %s (%s)" % (axis, logname),
+                 MAX_TITLE_LENGTH)))
+    ax.pcolormesh(t, bins, pdata, norm=matplotlib.colors.LogNorm())
+    ax.set_ylim([0., max_freq])
+    ax.set_ylabel('frequency (hz)')
+    ax.set_xlabel('Time (s)')
+    fig.tight_layout()
+    return fig
+
+######################################################################
+# CSV output
+######################################################################
+
+def write_frequency_response(datas, output):
+    helper = shaper_calibrate.ShaperCalibrate(printer=None)
+    calibration_data = helper.process_accelerometer_data(datas[0])
+    for data in datas[1:]:
+        calibration_data.add_data(helper.process_accelerometer_data(data))
+    helper.save_calibration_data(output, calibration_data)
+
+def write_specgram(psd, freq_bins, time, output):
+    M = freq_bins.shape[0]
+    with open(output, "w") as csvfile:
+        csvfile.write("freq\\t")
+        for ts in time:
+            csvfile.write(",%.6f" % (ts,))
+        csvfile.write("\n")
+        for i in range(M):
+            csvfile.write("%.1f" % (freq_bins[i],))
+            for value in psd[i,:]:
+                csvfile.write(",%.6e" % (value,))
+            csvfile.write("\n")
+
+######################################################################
+# Startup
+######################################################################
+
+def is_csv_output(output):
+    return output and os.path.splitext(output)[1].lower() == '.csv'
+
+def setup_matplotlib(output):
+    global matplotlib
+    if is_csv_output(output):
+        # Only mlab may be necessary with CSV output
+        import matplotlib.mlab
+        return
+    if output:
+        matplotlib.rcParams.update({'figure.autolayout': True})
+        matplotlib.use('Agg')
+    import matplotlib.pyplot, matplotlib.dates, matplotlib.font_manager
+    import matplotlib.ticker
+
+def main():
+    # Parse command-line arguments
+    usage = "%prog [options] <raw logs>"
+    opts = optparse.OptionParser(usage)
+    opts.add_option("-o", "--output", type="string", dest="output",
+                    default=None, help="filename of output graph")
+    opts.add_option("-f", "--max_freq", type="float", default=200.,
+                    help="maximum frequency to graph")
+    opts.add_option("-r", "--raw", action="store_true",
+                    help="graph raw accelerometer data")
+    opts.add_option("-c", "--compare", action="store_true",
+                    help="graph comparison of power spectral density "
+                         "between different accelerometer data files")
+    opts.add_option("-s", "--specgram", action="store_true",
+                    help="graph spectrogram of accelerometer data")
+    opts.add_option("-a", type="string", dest="axis", default="all",
+                    help="axis to graph (one of 'all', 'x', 'y', or 'z')")
+    options, args = opts.parse_args()
+    if len(args) < 1:
+        opts.error("Incorrect number of arguments")
+
+    # Parse data
+    datas = [parse_log(fn, opts) for fn in args]
+
+    setup_matplotlib(options.output)
+
+    if is_csv_output(options.output):
+        if options.raw:
+            opts.error("raw mode is not supported with csv output")
+        if options.compare:
+            opts.error("comparison mode is not supported with csv output")
+        if options.specgram:
+            if len(args) > 1:
+                opts.error("Only 1 input is supported in specgram mode")
+            pdata, bins, t = calc_specgram(datas[0], options.axis)
+            write_specgram(pdata, bins, t, options.output)
+        else:
+            write_frequency_response(datas, options.output)
+        return
+
+    # Draw graph
+    if options.raw:
+        if len(args) > 1:
+            opts.error("Only 1 input is supported in raw mode")
+        fig = plot_accel(datas[0], args[0])
+    elif options.specgram:
+        if len(args) > 1:
+            opts.error("Only 1 input is supported in specgram mode")
+        fig = plot_specgram(datas[0], args[0], options.max_freq, options.axis)
+    elif options.compare:
+        fig = plot_compare_frequency(datas, args, options.max_freq,
+                                     options.axis)
+    else:
+        fig = plot_frequency(datas, args, options.max_freq)
+
+    # Show graph
+    if options.output is None:
+        matplotlib.pyplot.show()
+    else:
+        fig.set_size_inches(8, 6)
+        fig.savefig(options.output)
+
+if __name__ == '__main__':
+    main()

scripts/graph_extruder.py

@@ -0,0 +1,193 @@
+#!/usr/bin/env python
+# Generate extruder pressure advance motion graphs
+#
+# Copyright (C) 2019-2021  Kevin O'Connor <kevin@koconnor.net>
+#
+# This file may be distributed under the terms of the GNU GPLv3 license.
+import math, optparse, datetime
+import matplotlib
+
+SEG_TIME = .000100
+INV_SEG_TIME = 1. / SEG_TIME
+
+
+######################################################################
+# Basic trapezoid motion
+######################################################################
+
+# List of moves: [(start_v, end_v, move_t), ...]
+Moves = [
+    (0., 0., .100),
+    (0., 100., None), (100., 100., .200), (100., 60., None),
+    (60., 100., None), (100., 100., .200), (100., 0., None),
+    (0., 0., .300)
+]
+EXTRUDE_R = (.4 * .4 * .75) / (math.pi * (1.75 / 2.)**2)
+ACCEL = 3000. * EXTRUDE_R
+
+def gen_positions():
+    out = []
+    start_d = start_t = t = 0.
+    for start_v, end_v, move_t in Moves:
+        start_v *= EXTRUDE_R
+        end_v *= EXTRUDE_R
+        if move_t is None:
+            move_t = abs(end_v - start_v) / ACCEL
+        half_accel = 0.
+        if end_v > start_v:
+            half_accel = .5 * ACCEL
+        elif start_v > end_v:
+            half_accel = -.5 * ACCEL
+        end_t = start_t + move_t
+        while t <= end_t:
+            rel_t = t - start_t
+            out.append(start_d + (start_v + half_accel * rel_t) * rel_t)
+            t += SEG_TIME
+        start_d += (start_v + half_accel * move_t) * move_t
+        start_t = end_t
+    return out
+
+
+######################################################################
+# List helper functions
+######################################################################
+
+MARGIN_TIME = 0.050
+
+def time_to_index(t):
+    return int(t * INV_SEG_TIME + .5)
+
+def indexes(positions):
+    drop = time_to_index(MARGIN_TIME)
+    return range(drop, len(positions)-drop)
+
+def trim_lists(*lists):
+    keep = len(lists[0]) - time_to_index(2. * MARGIN_TIME)
+    for l in lists:
+        del l[keep:]
+
+
+######################################################################
+# Common data filters
+######################################################################
+
+# Generate estimated first order derivative
+def gen_deriv(data):
+    return [0.] + [(data[i+1] - data[i]) * INV_SEG_TIME
+                   for i in range(len(data)-1)]
+
+# Simple average between two points smooth_time away
+def calc_average(positions, smooth_time):
+    offset = time_to_index(smooth_time * .5)
+    out = [0.] * len(positions)
+    for i in indexes(positions):
+        out[i] = .5 * (positions[i-offset] + positions[i+offset])
+    return out
+
+# Average (via integration) of smooth_time range
+def calc_smooth(positions, smooth_time):
+    offset = time_to_index(smooth_time * .5)
+    weight = 1. / (2*offset - 1)
+    out = [0.] * len(positions)
+    for i in indexes(positions):
+        out[i] = sum(positions[i-offset+1:i+offset]) * weight
+    return out
+
+# Time weighted average (via integration) of smooth_time range
+def calc_weighted(positions, smooth_time):
+    offset = time_to_index(smooth_time * .5)
+    weight = 1. / offset**2
+    out = [0.] * len(positions)
+    for i in indexes(positions):
+        weighted_data = [positions[j] * (offset - abs(j-i))
+                         for j in range(i-offset, i+offset)]
+        out[i] = sum(weighted_data) * weight
+    return out
+
+
+######################################################################
+# Pressure advance
+######################################################################
+
+SMOOTH_TIME = .040
+PRESSURE_ADVANCE = .045
+
+# Calculate raw pressure advance positions
+def calc_pa_raw(positions):
+    pa = PRESSURE_ADVANCE * INV_SEG_TIME
+    out = [0.] * len(positions)
+    for i in indexes(positions):
+        out[i] = positions[i] + pa * (positions[i+1] - positions[i])
+    return out
+
+# Pressure advance after smoothing
+def calc_pa(positions):
+    return calc_weighted(calc_pa_raw(positions), SMOOTH_TIME)
+
+
+######################################################################
+# Plotting and startup
+######################################################################
+
+def plot_motion():
+    # Nominal motion
+    positions = gen_positions()
+    velocities = gen_deriv(positions)
+    accels = gen_deriv(velocities)
+    # Motion with pressure advance
+    pa_positions = calc_pa_raw(positions)
+    pa_velocities = gen_deriv(pa_positions)
+    # Smoothed motion
+    sm_positions = calc_pa(positions)
+    sm_velocities = gen_deriv(sm_positions)
+    # Build plot
+    times = [SEG_TIME * i for i in range(len(positions))]
+    trim_lists(times, velocities, accels,
+               pa_positions, pa_velocities,
+               sm_positions, sm_velocities)
+    fig, ax1 = matplotlib.pyplot.subplots(nrows=1, sharex=True)
+    ax1.set_title("Extruder Velocity")
+    ax1.set_ylabel('Velocity (mm/s)')
+    pa_plot, = ax1.plot(times, pa_velocities, 'r',
+                        label='Pressure Advance', alpha=0.3)
+    nom_plot, = ax1.plot(times, velocities, 'black', label='Nominal')
+    sm_plot, = ax1.plot(times, sm_velocities, 'g', label='Smooth PA', alpha=0.9)
+    fontP = matplotlib.font_manager.FontProperties()
+    fontP.set_size('x-small')
+    ax1.legend(handles=[nom_plot, pa_plot, sm_plot], loc='best', prop=fontP)
+    ax1.set_xlabel('Time (s)')
+    ax1.grid(True)
+    fig.tight_layout()
+    return fig
+
+def setup_matplotlib(output_to_file):
+    global matplotlib
+    if output_to_file:
+        matplotlib.rcParams.update({'figure.autolayout': True})
+        matplotlib.use('Agg')
+    import matplotlib.pyplot, matplotlib.dates, matplotlib.font_manager
+    import matplotlib.ticker
+
+def main():
+    # Parse command-line arguments
+    usage = "%prog [options]"
+    opts = optparse.OptionParser(usage)
+    opts.add_option("-o", "--output", type="string", dest="output",
+                    default=None, help="filename of output graph")
+    options, args = opts.parse_args()
+    if len(args) != 0:
+        opts.error("Incorrect number of arguments")
+
+    # Draw graph
+    setup_matplotlib(options.output is not None)
+    fig = plot_motion()
+
+    # Show graph
+    if options.output is None:
+        matplotlib.pyplot.show()
+    else:
+        fig.set_size_inches(6, 2.5)
+        fig.savefig(options.output)
+
+if __name__ == '__main__':
+    main()

scripts/graph_motion.py

@@ -0,0 +1,427 @@
+#!/usr/bin/env python
+# Script to graph motion results
+#
+# Copyright (C) 2019-2021  Kevin O'Connor <kevin@koconnor.net>
+# Copyright (C) 2020  Dmitry Butyugin <dmbutyugin@google.com>
+#
+# This file may be distributed under the terms of the GNU GPLv3 license.
+import optparse, datetime, math
+import matplotlib
+
+SEG_TIME = .000100
+INV_SEG_TIME = 1. / SEG_TIME
+
+SPRING_FREQ=35.0
+DAMPING_RATIO=0.05
+
+CONFIG_FREQ=40.0
+CONFIG_DAMPING_RATIO=0.1
+
+######################################################################
+# Basic trapezoid motion
+######################################################################
+
+# List of moves: [(start_v, end_v, move_t), ...]
+Moves = [
+    (0., 0., .100),
+    (6.869, 89.443, None), (89.443, 89.443, .120), (89.443, 17.361, None),
+    (19.410, 120., None), (120., 120., .130), (120., 5., None),
+    (0., 0., 0.01),
+    (-5., -100., None), (-100., -100., .100), (-100., -.5, None),
+    (0., 0., .200)
+]
+ACCEL = 3000.
+MAX_JERK = ACCEL * 0.6 * SPRING_FREQ
+
+def get_accel(start_v, end_v):
+    return ACCEL
+
+def get_accel_jerk_limit(start_v, end_v):
+    effective_accel = math.sqrt(MAX_JERK * abs(end_v - start_v) / 6.)
+    return min(effective_accel, ACCEL)
+
+# Standard constant acceleration generator
+def get_acc_pos_ao2(rel_t, start_v, accel, move_t):
+    return (start_v + 0.5 * accel * rel_t) * rel_t
+
+# Bezier curve "accel_order=4" generator
+def get_acc_pos_ao4(rel_t, start_v, accel, move_t):
+    inv_accel_t = 1. / move_t
+    accel_div_accel_t = accel * inv_accel_t
+    accel_div_accel_t2 = accel_div_accel_t * inv_accel_t
+
+    c4 = -.5 * accel_div_accel_t2;
+    c3 = accel_div_accel_t;
+    c1 = start_v
+    return ((c4 * rel_t + c3) * rel_t * rel_t + c1) * rel_t
+
+# Bezier curve "accel_order=6" generator
+def get_acc_pos_ao6(rel_t, start_v, accel, move_t):
+    inv_accel_t = 1. / move_t
+    accel_div_accel_t = accel * inv_accel_t
+    accel_div_accel_t2 = accel_div_accel_t * inv_accel_t
+    accel_div_accel_t3 = accel_div_accel_t2 * inv_accel_t
+    accel_div_accel_t4 = accel_div_accel_t3 * inv_accel_t
+
+    c6 = accel_div_accel_t4;
+    c5 = -3. * accel_div_accel_t3;
+    c4 = 2.5 * accel_div_accel_t2;
+    c1 = start_v;
+    return (((c6 * rel_t + c5) * rel_t + c4)
+            * rel_t * rel_t * rel_t + c1) * rel_t
+
+get_acc_pos = get_acc_pos_ao2
+get_acc = get_accel
+
+# Calculate positions based on 'Moves' list
+def gen_positions():
+    out = []
+    start_d = start_t = t = 0.
+    for start_v, end_v, move_t in Moves:
+        if move_t is None:
+            move_t = abs(end_v - start_v) / get_acc(start_v, end_v)
+        accel = (end_v - start_v) / move_t
+        end_t = start_t + move_t
+        while t <= end_t:
+            rel_t = t - start_t
+            out.append(start_d + get_acc_pos(rel_t, start_v, accel, move_t))
+            t += SEG_TIME
+        start_d += get_acc_pos(move_t, start_v, accel, move_t)
+        start_t = end_t
+    return out
+
+
+######################################################################
+# Estimated motion with belt as spring
+######################################################################
+
+def estimate_spring(positions):
+    ang_freq2 = (SPRING_FREQ * 2. * math.pi)**2
+    damping_factor = 4. * math.pi * DAMPING_RATIO * SPRING_FREQ
+    head_pos = head_v = 0.
+    out = []
+    for stepper_pos in positions:
+        head_pos += head_v * SEG_TIME
+        head_a = (stepper_pos - head_pos) * ang_freq2
+        head_v += head_a * SEG_TIME
+        head_v -= head_v * damping_factor * SEG_TIME
+        out.append(head_pos)
+    return out
+
+
+######################################################################
+# List helper functions
+######################################################################
+
+MARGIN_TIME = 0.050
+
+def time_to_index(t):
+    return int(t * INV_SEG_TIME + .5)
+
+def indexes(positions):
+    drop = time_to_index(MARGIN_TIME)
+    return range(drop, len(positions)-drop)
+
+def trim_lists(*lists):
+    keep = len(lists[0]) - time_to_index(2. * MARGIN_TIME)
+    for l in lists:
+        del l[keep:]
+
+
+######################################################################
+# Common data filters
+######################################################################
+
+# Generate estimated first order derivative
+def gen_deriv(data):
+    return [0.] + [(data[i+1] - data[i]) * INV_SEG_TIME
+                   for i in range(len(data)-1)]
+
+# Simple average between two points smooth_time away
+def calc_average(positions, smooth_time):
+    offset = time_to_index(smooth_time * .5)
+    out = [0.] * len(positions)
+    for i in indexes(positions):
+        out[i] = .5 * (positions[i-offset] + positions[i+offset])
+    return out
+
+# Average (via integration) of smooth_time range
+def calc_smooth(positions, smooth_time):
+    offset = time_to_index(smooth_time * .5)
+    weight = 1. / (2*offset - 1)
+    out = [0.] * len(positions)
+    for i in indexes(positions):
+        out[i] = sum(positions[i-offset+1:i+offset]) * weight
+    return out
+
+# Time weighted average (via integration) of smooth_time range
+def calc_weighted(positions, smooth_time):
+    offset = time_to_index(smooth_time * .5)
+    weight = 1. / offset**2
+    out = [0.] * len(positions)
+    for i in indexes(positions):
+        weighted_data = [positions[j] * (offset - abs(j-i))
+                         for j in range(i-offset, i+offset)]
+        out[i] = sum(weighted_data) * weight
+    return out
+
+# Weighted average (`h**2 - (t-T)**2`) of smooth_time range
+def calc_weighted2(positions, smooth_time):
+    offset = time_to_index(smooth_time * .5)
+    weight = .75 / offset**3
+    out = [0.] * len(positions)
+    for i in indexes(positions):
+        weighted_data = [positions[j] * (offset**2 - (j-i)**2)
+                         for j in range(i-offset, i+offset)]
+        out[i] = sum(weighted_data) * weight
+    return out
+
+# Weighted average (`(h**2 - (t-T)**2)**2`) of smooth_time range
+def calc_weighted4(positions, smooth_time):
+    offset = time_to_index(smooth_time * .5)
+    weight = 15 / (16. * offset**5)
+    out = [0.] * len(positions)
+    for i in indexes(positions):
+        weighted_data = [positions[j] * ((offset**2 - (j-i)**2))**2
+                         for j in range(i-offset, i+offset)]
+        out[i] = sum(weighted_data) * weight
+    return out
+
+# Weighted average (`(h - abs(t-T))**2 * (2 * abs(t-T) + h)`) of range
+def calc_weighted3(positions, smooth_time):
+    offset = time_to_index(smooth_time * .5)
+    weight = 1. / offset**4
+    out = [0.] * len(positions)
+    for i in indexes(positions):
+        weighted_data = [positions[j] * (offset - abs(j-i))**2
+                         * (2. * abs(j-i) + offset)
+                         for j in range(i-offset, i+offset)]
+        out[i] = sum(weighted_data) * weight
+    return out
+
+
+######################################################################
+# Spring motion estimation
+######################################################################
+
+def calc_spring_raw(positions):
+    sa = (INV_SEG_TIME / (CONFIG_FREQ * 2. * math.pi))**2
+    ra = 2. * CONFIG_DAMPING_RATIO * math.sqrt(sa)
+    out = [0.] * len(positions)
+    for i in indexes(positions):
+        out[i] = (positions[i]
+                  + sa * (positions[i-1] - 2.*positions[i] + positions[i+1])
+                  + ra * (positions[i+1] - positions[i]))
+    return out
+
+def calc_spring_double_weighted(positions, smooth_time):
+    offset = time_to_index(smooth_time * .25)
+    sa = (INV_SEG_TIME / (offset * CONFIG_FREQ * 2. * math.pi))**2
+    ra = 2. * CONFIG_DAMPING_RATIO * math.sqrt(sa)
+    out = [0.] * len(positions)
+    for i in indexes(positions):
+        out[i] = (positions[i]
+                  + sa * (positions[i-offset] - 2.*positions[i]
+                          + positions[i+offset])
+                  + ra * (positions[i+1] - positions[i]))
+    return calc_weighted(out, smooth_time=.5 * smooth_time)
+
+######################################################################
+# Input shapers
+######################################################################
+
+def get_zv_shaper():
+    df = math.sqrt(1. - CONFIG_DAMPING_RATIO**2)
+    K = math.exp(-CONFIG_DAMPING_RATIO * math.pi / df)
+    t_d = 1. / (CONFIG_FREQ * df)
+    A = [1., K]
+    T = [0., .5*t_d]
+    return (A, T, "ZV")
+
+def get_zvd_shaper():
+    df = math.sqrt(1. - CONFIG_DAMPING_RATIO**2)
+    K = math.exp(-CONFIG_DAMPING_RATIO * math.pi / df)
+    t_d = 1. / (CONFIG_FREQ * df)
+    A = [1., 2.*K, K**2]
+    T = [0., .5*t_d, t_d]
+    return (A, T, "ZVD")
+
+def get_mzv_shaper():
+    df = math.sqrt(1. - CONFIG_DAMPING_RATIO**2)
+    K = math.exp(-.75 * CONFIG_DAMPING_RATIO * math.pi / df)
+    t_d = 1. / (CONFIG_FREQ * df)
+
+    a1 = 1. - 1. / math.sqrt(2.)
+    a2 = (math.sqrt(2.) - 1.) * K
+    a3 = a1 * K * K
+
+    A = [a1, a2, a3]
+    T = [0., .375*t_d, .75*t_d]
+    return (A, T, "MZV")
+
+def get_ei_shaper():
+    v_tol = 0.05 # vibration tolerance
+    df = math.sqrt(1. - CONFIG_DAMPING_RATIO**2)
+    K = math.exp(-CONFIG_DAMPING_RATIO * math.pi / df)
+    t_d = 1. / (CONFIG_FREQ * df)
+
+    a1 = .25 * (1. + v_tol)
+    a2 = .5 * (1. - v_tol) * K
+    a3 = a1 * K * K
+
+    A = [a1, a2, a3]
+    T = [0., .5*t_d, t_d]
+    return (A, T, "EI")
+
+def get_2hump_ei_shaper():
+    v_tol = 0.05 # vibration tolerance
+    df = math.sqrt(1. - CONFIG_DAMPING_RATIO**2)
+    K = math.exp(-CONFIG_DAMPING_RATIO * math.pi / df)
+    t_d = 1. / (CONFIG_FREQ * df)
+
+    V2 = v_tol**2
+    X = pow(V2 * (math.sqrt(1. - V2) + 1.), 1./3.)
+    a1 = (3.*X*X + 2.*X + 3.*V2) / (16.*X)
+    a2 = (.5 - a1) * K
+    a3 = a2 * K
+    a4 = a1 * K * K * K
+
+    A = [a1, a2, a3, a4]
+    T = [0., .5*t_d, t_d, 1.5*t_d]
+    return (A, T, "2-hump EI")
+
+def get_3hump_ei_shaper():
+    v_tol = 0.05 # vibration tolerance
+    df = math.sqrt(1. - CONFIG_DAMPING_RATIO**2)
+    K = math.exp(-CONFIG_DAMPING_RATIO * math.pi / df)
+    t_d = 1. / (CONFIG_FREQ * df)
+
+    K2 = K*K
+    a1 = 0.0625 * (1. + 3. * v_tol + 2. * math.sqrt(2. * (v_tol + 1.) * v_tol))
+    a2 = 0.25 * (1. - v_tol) * K
+    a3 = (0.5 * (1. + v_tol) - 2. * a1) * K2
+    a4 = a2 * K2
+    a5 = a1 * K2 * K2
+
+    A = [a1, a2, a3, a4, a5]
+    T = [0., .5*t_d, t_d, 1.5*t_d, 2.*t_d]
+    return (A, T, "3-hump EI")
+
+
+def shift_pulses(shaper):
+    A, T, name = shaper
+    n = len(T)
+    ts = (sum([A[i] * T[i] for i in range(n)])) / sum(A)
+    for i in range(n):
+        T[i] -= ts
+
+def calc_shaper(shaper, positions):
+    shift_pulses(shaper)
+    A = shaper[0]
+    inv_D = 1. / sum(A)
+    n = len(A)
+    T = [time_to_index(-shaper[1][j]) for j in range(n)]
+    out = [0.] * len(positions)
+    for i in indexes(positions):
+        out[i] = sum([positions[i + T[j]] * A[j] for j in range(n)]) * inv_D
+    return out
+
+# Ideal values
+SMOOTH_TIME = (2./3.) / CONFIG_FREQ
+
+def gen_updated_position(positions):
+    #return calc_weighted(positions, 0.040)
+    #return calc_spring_double_weighted(positions, SMOOTH_TIME)
+    #return calc_weighted4(calc_spring_raw(positions), SMOOTH_TIME)
+    return calc_shaper(get_ei_shaper(), positions)
+
+
+######################################################################
+# Plotting and startup
+######################################################################
+
+def plot_motion():
+    # Nominal motion
+    positions = gen_positions()
+    velocities = gen_deriv(positions)
+    accels = gen_deriv(velocities)
+    # Updated motion
+    upd_positions = gen_updated_position(positions)
+    upd_velocities = gen_deriv(upd_positions)
+    upd_accels = gen_deriv(upd_velocities)
+    # Estimated position with model of belt as spring
+    spring_orig = estimate_spring(positions)
+    spring_upd = estimate_spring(upd_positions)
+    spring_diff_orig = [n-o for n, o in zip(spring_orig, positions)]
+    spring_diff_upd = [n-o for n, o in zip(spring_upd, positions)]
+    head_velocities = gen_deriv(spring_orig)
+    head_accels = gen_deriv(head_velocities)
+    head_upd_velocities = gen_deriv(spring_upd)
+    head_upd_accels = gen_deriv(head_upd_velocities)
+    # Build plot
+    times = [SEG_TIME * i for i in range(len(positions))]
+    trim_lists(times, velocities, accels,
+               upd_velocities, upd_velocities, upd_accels,
+               spring_diff_orig, spring_diff_upd,
+               head_velocities, head_upd_velocities,
+               head_accels, head_upd_accels)
+    fig, (ax1, ax2, ax3) = matplotlib.pyplot.subplots(nrows=3, sharex=True)
+    ax1.set_title("Simulation: resonance freq=%.1f Hz, damping_ratio=%.3f,\n"
+                  "configured freq=%.1f Hz, damping_ratio = %.3f"
+                  % (SPRING_FREQ, DAMPING_RATIO, CONFIG_FREQ
+                      , CONFIG_DAMPING_RATIO))
+    ax1.set_ylabel('Velocity (mm/s)')
+    ax1.plot(times, upd_velocities, 'r', label='New Velocity', alpha=0.8)
+    ax1.plot(times, velocities, 'g', label='Nominal Velocity', alpha=0.8)
+    ax1.plot(times, head_velocities, label='Head Velocity', alpha=0.4)
+    ax1.plot(times, head_upd_velocities, label='New Head Velocity', alpha=0.4)
+    fontP = matplotlib.font_manager.FontProperties()
+    fontP.set_size('x-small')
+    ax1.legend(loc='best', prop=fontP)
+    ax1.grid(True)
+    ax2.set_ylabel('Acceleration (mm/s^2)')
+    ax2.plot(times, upd_accels, 'r', label='New Accel', alpha=0.8)
+    ax2.plot(times, accels, 'g', label='Nominal Accel', alpha=0.8)
+    ax2.plot(times, head_accels, alpha=0.4)
+    ax2.plot(times, head_upd_accels, alpha=0.4)
+    ax2.set_ylim([-5. * ACCEL, 5. * ACCEL])
+    ax2.legend(loc='best', prop=fontP)
+    ax2.grid(True)
+    ax3.set_ylabel('Deviation (mm)')
+    ax3.plot(times, spring_diff_upd, 'r', label='New', alpha=0.8)
+    ax3.plot(times, spring_diff_orig, 'g', label='Nominal', alpha=0.8)
+    ax3.grid(True)
+    ax3.legend(loc='best', prop=fontP)
+    ax3.set_xlabel('Time (s)')
+    return fig
+
+def setup_matplotlib(output_to_file):
+    global matplotlib
+    if output_to_file:
+        matplotlib.use('Agg')
+    import matplotlib.pyplot, matplotlib.dates, matplotlib.font_manager
+    import matplotlib.ticker
+
+def main():
+    # Parse command-line arguments
+    usage = "%prog [options]"
+    opts = optparse.OptionParser(usage)
+    opts.add_option("-o", "--output", type="string", dest="output",
+                    default=None, help="filename of output graph")
+    options, args = opts.parse_args()
+    if len(args) != 0:
+        opts.error("Incorrect number of arguments")
+
+    # Draw graph
+    setup_matplotlib(options.output is not None)
+    fig = plot_motion()
+
+    # Show graph
+    if options.output is None:
+        matplotlib.pyplot.show()
+    else:
+        fig.set_size_inches(8, 6)
+        fig.savefig(options.output)
+
+if __name__ == '__main__':
+    main()

scripts/graph_shaper.py

@@ -0,0 +1,283 @@
+#!/usr/bin/env python
+# Script to plot input shapers
+#
+# Copyright (C) 2020  Kevin O'Connor <kevin@koconnor.net>
+# Copyright (C) 2020  Dmitry Butyugin <dmbutyugin@google.com>
+#
+# This file may be distributed under the terms of the GNU GPLv3 license.
+import optparse, math
+import matplotlib
+
+# A set of damping ratios to calculate shaper response for
+DAMPING_RATIOS=[0.05, 0.1, 0.2]
+
+# Parameters of the input shaper
+SHAPER_FREQ=50.0
+SHAPER_DAMPING_RATIO=0.1
+
+# Simulate input shaping of step function for these true resonance frequency
+# and damping ratio
+STEP_SIMULATION_RESONANCE_FREQ=60.
+STEP_SIMULATION_DAMPING_RATIO=0.15
+
+# If set, defines which range of frequencies to plot shaper frequency responce
+PLOT_FREQ_RANGE = []  # If empty, will be automatically determined
+#PLOT_FREQ_RANGE = [10., 100.]
+
+PLOT_FREQ_STEP = .01
+
+######################################################################
+# Input shapers
+######################################################################
+
+def get_zv_shaper():
+    df = math.sqrt(1. - SHAPER_DAMPING_RATIO**2)
+    K = math.exp(-SHAPER_DAMPING_RATIO * math.pi / df)
+    t_d = 1. / (SHAPER_FREQ * df)
+    A = [1., K]
+    T = [0., .5*t_d]
+    return (A, T, "ZV")
+
+def get_zvd_shaper():
+    df = math.sqrt(1. - SHAPER_DAMPING_RATIO**2)
+    K = math.exp(-SHAPER_DAMPING_RATIO * math.pi / df)
+    t_d = 1. / (SHAPER_FREQ * df)
+    A = [1., 2.*K, K**2]
+    T = [0., .5*t_d, t_d]
+    return (A, T, "ZVD")
+
+def get_mzv_shaper():
+    df = math.sqrt(1. - SHAPER_DAMPING_RATIO**2)
+    K = math.exp(-.75 * SHAPER_DAMPING_RATIO * math.pi / df)
+    t_d = 1. / (SHAPER_FREQ * df)
+
+    a1 = 1. - 1. / math.sqrt(2.)
+    a2 = (math.sqrt(2.) - 1.) * K
+    a3 = a1 * K * K
+
+    A = [a1, a2, a3]
+    T = [0., .375*t_d, .75*t_d]
+    return (A, T, "MZV")
+
+def get_ei_shaper():
+    v_tol = 0.05 # vibration tolerance
+    df = math.sqrt(1. - SHAPER_DAMPING_RATIO**2)
+    K = math.exp(-SHAPER_DAMPING_RATIO * math.pi / df)
+    t_d = 1. / (SHAPER_FREQ * df)
+
+    a1 = .25 * (1. + v_tol)
+    a2 = .5 * (1. - v_tol) * K
+    a3 = a1 * K * K
+
+    A = [a1, a2, a3]
+    T = [0., .5*t_d, t_d]
+    return (A, T, "EI")
+
+def get_2hump_ei_shaper():
+    v_tol = 0.05 # vibration tolerance
+    df = math.sqrt(1. - SHAPER_DAMPING_RATIO**2)
+    K = math.exp(-SHAPER_DAMPING_RATIO * math.pi / df)
+    t_d = 1. / (SHAPER_FREQ * df)
+
+    V2 = v_tol**2
+    X = pow(V2 * (math.sqrt(1. - V2) + 1.), 1./3.)
+    a1 = (3.*X*X + 2.*X + 3.*V2) / (16.*X)
+    a2 = (.5 - a1) * K
+    a3 = a2 * K
+    a4 = a1 * K * K * K
+
+    A = [a1, a2, a3, a4]
+    T = [0., .5*t_d, t_d, 1.5*t_d]
+    return (A, T, "2-hump EI")
+
+def get_3hump_ei_shaper():
+    v_tol = 0.05 # vibration tolerance
+    df = math.sqrt(1. - SHAPER_DAMPING_RATIO**2)
+    K = math.exp(-SHAPER_DAMPING_RATIO * math.pi / df)
+    t_d = 1. / (SHAPER_FREQ * df)
+
+    K2 = K*K
+    a1 = 0.0625 * (1. + 3. * v_tol + 2. * math.sqrt(2. * (v_tol + 1.) * v_tol))
+    a2 = 0.25 * (1. - v_tol) * K
+    a3 = (0.5 * (1. + v_tol) - 2. * a1) * K2
+    a4 = a2 * K2
+    a5 = a1 * K2 * K2
+
+    A = [a1, a2, a3, a4, a5]
+    T = [0., .5*t_d, t_d, 1.5*t_d, 2.*t_d]
+    return (A, T, "3-hump EI")
+
+
+def estimate_shaper(shaper, freq, damping_ratio):
+    A, T, _ = shaper
+    n = len(T)
+    inv_D = 1. / sum(A)
+    omega = 2. * math.pi * freq
+    damping = damping_ratio * omega
+    omega_d = omega * math.sqrt(1. - damping_ratio**2)
+    S = C = 0
+    for i in range(n):
+        W = A[i] * math.exp(-damping * (T[-1] - T[i]))
+        S += W * math.sin(omega_d * T[i])
+        C += W * math.cos(omega_d * T[i])
+    return math.sqrt(S*S + C*C) * inv_D
+
+def shift_pulses(shaper):
+    A, T, name = shaper
+    n = len(T)
+    ts = sum([A[i] * T[i] for i in range(n)]) / sum(A)
+    for i in range(n):
+        T[i] -= ts
+
+# Shaper selection
+get_shaper = get_ei_shaper
+
+
+######################################################################
+# Plotting and startup
+######################################################################
+
+def bisect(func, left, right):
+    lhs_sign = math.copysign(1., func(left))
+    while right-left > 1e-8:
+        mid = .5 * (left + right)
+        val = func(mid)
+        if math.copysign(1., val) == lhs_sign:
+            left = mid
+        else:
+            right = mid
+    return .5 * (left + right)
+
+def find_shaper_plot_range(shaper, vib_tol):
+    def eval_shaper(freq):
+        return estimate_shaper(shaper, freq, DAMPING_RATIOS[0]) - vib_tol
+    if not PLOT_FREQ_RANGE:
+        left = bisect(eval_shaper, 0., SHAPER_FREQ)
+        right = bisect(eval_shaper, SHAPER_FREQ, 2.4 * SHAPER_FREQ)
+    else:
+        left, right = PLOT_FREQ_RANGE
+    return (left, right)
+
+def gen_shaper_response(shaper):
+    # Calculate shaper vibration responce on a range of requencies
+    response = []
+    freqs = []
+    freq, freq_end = find_shaper_plot_range(shaper, vib_tol=0.25)
+    while freq <= freq_end:
+        vals = []
+        for damping_ratio in DAMPING_RATIOS:
+            vals.append(estimate_shaper(shaper, freq, damping_ratio))
+        response.append(vals)
+        freqs.append(freq)
+        freq += PLOT_FREQ_STEP
+    legend = ['damping ratio = %.3f' % d_r for d_r in DAMPING_RATIOS]
+    return freqs, response, legend
+
+def gen_shaped_step_function(shaper):
+    # Calculate shaping of a step function
+    A, T, _ = shaper
+    inv_D = 1. / sum(A)
+    n = len(T)
+
+    omega = 2. * math.pi * STEP_SIMULATION_RESONANCE_FREQ
+    damping = STEP_SIMULATION_DAMPING_RATIO * omega
+    omega_d = omega * math.sqrt(1. - STEP_SIMULATION_DAMPING_RATIO**2)
+    phase = math.acos(STEP_SIMULATION_DAMPING_RATIO)
+
+    t_start = T[0] - .5 / SHAPER_FREQ
+    t_end = T[-1] + 1.5 / STEP_SIMULATION_RESONANCE_FREQ
+    result = []
+    time = []
+    t = t_start
+
+    def step_response(t):
+        if t < 0.:
+            return 0.
+        return 1. - math.exp(-damping * t) * math.sin(omega_d * t
+                                                      + phase) / math.sin(phase)
+
+    while t <= t_end:
+        val = []
+        val.append(1. if t >= 0. else 0.)
+        #val.append(step_response(t))
+
+        commanded = 0.
+        response = 0.
+        S = C = 0
+        for i in range(n):
+            if t < T[i]:
+                continue
+            commanded += A[i]
+            response += A[i] * step_response(t - T[i])
+        val.append(commanded * inv_D)
+        val.append(response * inv_D)
+
+        result.append(val)
+        time.append(t)
+        t += .01 / SHAPER_FREQ
+    legend = ['step', 'shaper commanded', 'system response']
+    return time, result, legend
+
+
+def plot_shaper(shaper):
+    shift_pulses(shaper)
+    freqs, response, response_legend = gen_shaper_response(shaper)
+    time, step_vals, step_legend = gen_shaped_step_function(shaper)
+
+    fig, (ax1, ax2) = matplotlib.pyplot.subplots(nrows=2, figsize=(10,9))
+    ax1.set_title("Vibration response simulation for shaper '%s',\n"
+                  "shaper_freq=%.1f Hz, damping_ratio=%.3f"
+                  % (shaper[-1], SHAPER_FREQ, SHAPER_DAMPING_RATIO))
+    ax1.plot(freqs, response)
+    ax1.set_ylim(bottom=0.)
+    fontP = matplotlib.font_manager.FontProperties()
+    fontP.set_size('x-small')
+    ax1.legend(response_legend, loc='best', prop=fontP)
+    ax1.set_xlabel('Resonance frequency, Hz')
+    ax1.set_ylabel('Remaining vibrations, ratio')
+    ax1.xaxis.set_minor_locator(matplotlib.ticker.AutoMinorLocator())
+    ax1.yaxis.set_minor_locator(matplotlib.ticker.AutoMinorLocator())
+    ax1.grid(which='major', color='grey')
+    ax1.grid(which='minor', color='lightgrey')
+
+    ax2.set_title("Unit step input, resonance frequency=%.1f Hz, "
+                  "damping ratio=%.3f" % (STEP_SIMULATION_RESONANCE_FREQ,
+                                          STEP_SIMULATION_DAMPING_RATIO))
+    ax2.plot(time, step_vals)
+    ax2.legend(step_legend, loc='best', prop=fontP)
+    ax2.set_xlabel('Time, sec')
+    ax2.set_ylabel('Amplitude')
+    ax2.grid()
+    fig.tight_layout()
+    return fig
+
+def setup_matplotlib(output_to_file):
+    global matplotlib
+    if output_to_file:
+        matplotlib.use('Agg')
+    import matplotlib.pyplot, matplotlib.dates, matplotlib.font_manager
+    import matplotlib.ticker
+
+def main():
+    # Parse command-line arguments
+    usage = "%prog [options]"
+    opts = optparse.OptionParser(usage)
+    opts.add_option("-o", "--output", type="string", dest="output",
+                    default=None, help="filename of output graph")
+    options, args = opts.parse_args()
+    if len(args) != 0:
+        opts.error("Incorrect number of arguments")
+
+    # Draw graph
+    setup_matplotlib(options.output is not None)
+    fig = plot_shaper(get_shaper())
+
+    # Show graph
+    if options.output is None:
+        matplotlib.pyplot.show()
+    else:
+        fig.set_size_inches(8, 6)
+        fig.savefig(options.output)
+
+if __name__ == '__main__':
+    main()

scripts/graph_temp_sensor.py

@@ -0,0 +1,168 @@
+#!/usr/bin/env python2
+# Tool to graph temperature sensor ADC resolution
+#
+# Copyright (C) 2020  Kevin O'Connor <kevin@koconnor.net>
+#
+# This file may be distributed under the terms of the GNU GPLv3 license.
+import sys, os, optparse
+import matplotlib
+
+
+######################################################################
+# Dummy config / printer / etc. class emulation
+######################################################################
+
+class DummyConfig:
+    def __init__(self, config_settings):
+        self.config_settings = config_settings
+        self.sensor_factories = {}
+    # Emulate config class
+    def getfloat(self, option, default, **kw):
+        return self.config_settings.get(option, default)
+    def get(self, option, default=None):
+        return default
+    def get_printer(self):
+        return self
+    def get_name(self):
+        return "dummy"
+    # Emulate printer class
+    def load_object(self, config, name):
+        return self
+    def lookup_object(self, name):
+        return self
+    # Emulate heaters class
+    def add_sensor_factory(self, name, factory):
+        self.sensor_factories[name] = factory
+    def do_create_sensor(self, sensor_type):
+        return self.sensor_factories[sensor_type](self).adc_convert
+    # Emulate query_adc class
+    def register_adc(self, name, klass):
+        pass
+    # Emulate pins class
+    def setup_pin(self, pin_type, pin_name):
+        return self
+    # Emulate mcu_adc class
+    def setup_adc_callback(self, time, callback):
+        pass
+
+
+######################################################################
+# Plotting
+######################################################################
+
+def plot_adc_resolution(config, sensors):
+    # Temperature list
+    all_temps = [float(i) for i in range(1, 351)]
+    temps = all_temps[:-1]
+    # Build plot
+    fig, (ax1, ax2) = matplotlib.pyplot.subplots(nrows=2, sharex=True)
+    pullup = config.getfloat('pullup_resistor', 0.)
+    adc_voltage = config.getfloat('adc_voltage', 0.)
+    ax1.set_title("Temperature Sensor (pullup=%.0f, adc_voltage=%.3f)"
+                  % (pullup, adc_voltage))
+    ax1.set_ylabel('ADC')
+    ax2.set_ylabel('ADC change per 1C')
+    for sensor in sensors:
+        sc = config.do_create_sensor(sensor)
+        adcs = [sc.calc_adc(t) for t in all_temps]
+        ax1.plot(temps, adcs[:-1], label=sensor, alpha=0.6)
+        adc_deltas = [abs(adcs[i+1] - adcs[i]) for i in range(len(temps))]
+        ax2.plot(temps, adc_deltas, alpha=0.6)
+    fontP = matplotlib.font_manager.FontProperties()
+    fontP.set_size('x-small')
+    ax1.legend(loc='best', prop=fontP)
+    ax2.set_xlabel('Temperature (C)')
+    ax1.grid(True)
+    ax2.grid(True)
+    fig.tight_layout()
+    return fig
+
+def plot_resistance(config, sensors):
+    # Temperature list
+    all_temps = [float(i) for i in range(1, 351)]
+    # Build plot
+    fig, ax = matplotlib.pyplot.subplots()
+    pullup = config.getfloat('pullup_resistor', 0.)
+    ax.set_title("Temperature Sensor (pullup=%.0f)" % (pullup,))
+    ax.set_ylabel('Resistance (Ohms)')
+    for sensor in sensors:
+        sc = config.do_create_sensor(sensor)
+        adcs = [sc.calc_adc(t) for t in all_temps]
+        rs = [pullup * adc / (1.0 - adc) for adc in adcs]
+        ax.plot(all_temps, rs, label=sensor, alpha=0.6)
+    fontP = matplotlib.font_manager.FontProperties()
+    fontP.set_size('x-small')
+    ax.legend(loc='best', prop=fontP)
+    ax.set_xlabel('Temperature (C)')
+    ax.grid(True)
+    fig.tight_layout()
+    return fig
+
+
+######################################################################
+# Startup
+######################################################################
+
+def setup_matplotlib(output_to_file):
+    global matplotlib
+    if output_to_file:
+        matplotlib.rcParams.update({'figure.autolayout': True})
+        matplotlib.use('Agg')
+    import matplotlib.pyplot, matplotlib.dates, matplotlib.font_manager
+    import matplotlib.ticker
+
+def import_sensors(config):
+    global extras
+    # Load adc_temperature.py and thermistor.py modules
+    kdir = os.path.join(os.path.dirname(__file__), '..', 'klippy')
+    sys.path.append(kdir)
+    import extras.adc_temperature, extras.thermistor
+    extras.thermistor.load_config(config)
+    extras.adc_temperature.load_config(config)
+
+def main():
+    # Parse command-line arguments
+    usage = "%prog [options]"
+    opts = optparse.OptionParser(usage)
+    opts.add_option("-o", "--output", type="string", dest="output",
+                    default=None, help="filename of output graph")
+    opts.add_option("-p", "--pullup", type="float", dest="pullup",
+                    default=4700., help="pullup resistor")
+    opts.add_option("-v", "--voltage", type="float", dest="voltage",
+                    default=5., help="pullup resistor")
+    opts.add_option("-s", "--sensors", type="string", dest="sensors",
+                    default="", help="list of sensors (comma separated)")
+    opts.add_option("-r", "--resistance", action="store_true",
+                    help="graph sensor resistance")
+    options, args = opts.parse_args()
+    if len(args) != 0:
+        opts.error("Incorrect number of arguments")
+
+    # Import sensors
+    config_settings = {'pullup_resistor': options.pullup,
+                       'adc_voltage': options.voltage}
+    config = DummyConfig(config_settings)
+    import_sensors(config)
+
+    # Determine sensors to graph
+    if options.sensors:
+        sensors = [s.strip() for s in options.sensors.split(',')]
+    else:
+        sensors = sorted(config.sensor_factories.keys())
+
+    # Draw graph
+    setup_matplotlib(options.output is not None)
+    if options.resistance:
+        fig = plot_resistance(config, sensors)
+    else:
+        fig = plot_adc_resolution(config, sensors)
+
+    # Show graph
+    if options.output is None:
+        matplotlib.pyplot.show()
+    else:
+        fig.set_size_inches(8, 6)
+        fig.savefig(options.output)
+
+if __name__ == '__main__':
+    main()

scripts/graphstats.py

@@ -0,0 +1,303 @@
+#!/usr/bin/env python
+# Script to parse a logging file, extract the stats, and graph them
+#
+# Copyright (C) 2016-2021  Kevin O'Connor <kevin@koconnor.net>
+#
+# This file may be distributed under the terms of the GNU GPLv3 license.
+import optparse, datetime
+import matplotlib
+
+MAXBANDWIDTH=25000.
+MAXBUFFER=2.
+STATS_INTERVAL=5.
+TASK_MAX=0.0025
+
+APPLY_PREFIX = [
+    'mcu_awake', 'mcu_task_avg', 'mcu_task_stddev', 'bytes_write',
+    'bytes_read', 'bytes_retransmit', 'freq', 'adj',
+    'target', 'temp', 'pwm'
+]
+
+def parse_log(logname, mcu):
+    if mcu is None:
+        mcu = "mcu"
+    mcu_prefix = mcu + ":"
+    apply_prefix = { p: 1 for p in APPLY_PREFIX }
+    f = open(logname, 'r')
+    out = []
+    for line in f:
+        parts = line.split()
+        if not parts or parts[0] not in ('Stats', 'INFO:root:Stats'):
+            #if parts and parts[0] == 'INFO:root:shutdown:':
+            #    break
+            continue
+        prefix = ""
+        keyparts = {}
+        for p in parts[2:]:
+            if '=' not in p:
+                prefix = p
+                if prefix == mcu_prefix:
+                    prefix = ''
+                continue
+            name, val = p.split('=', 1)
+            if name in apply_prefix:
+                name = prefix + name
+            keyparts[name] = val
+        if 'print_time' not in keyparts:
+            continue
+        keyparts['#sampletime'] = float(parts[1][:-1])
+        out.append(keyparts)
+    f.close()
+    return out
+
+def setup_matplotlib(output_to_file):
+    global matplotlib
+    if output_to_file:
+        matplotlib.use('Agg')
+    import matplotlib.pyplot, matplotlib.dates, matplotlib.font_manager
+    import matplotlib.ticker
+
+def find_print_restarts(data):
+    runoff_samples = {}
+    last_runoff_start = last_buffer_time = last_sampletime = 0.
+    last_print_stall = 0
+    for d in reversed(data):
+        # Check for buffer runoff
+        sampletime = d['#sampletime']
+        buffer_time = float(d.get('buffer_time', 0.))
+        if (last_runoff_start and last_sampletime - sampletime < 5
+            and buffer_time > last_buffer_time):
+            runoff_samples[last_runoff_start][1].append(sampletime)
+        elif buffer_time < 1.:
+            last_runoff_start = sampletime
+            runoff_samples[last_runoff_start] = [False, [sampletime]]
+        else:
+            last_runoff_start = 0.
+        last_buffer_time = buffer_time
+        last_sampletime = sampletime
+        # Check for print stall
+        print_stall = int(d['print_stall'])
+        if print_stall < last_print_stall:
+            if last_runoff_start:
+                runoff_samples[last_runoff_start][0] = True
+        last_print_stall = print_stall
+    sample_resets = {sampletime: 1 for stall, samples in runoff_samples.values()
+                     for sampletime in samples if not stall}
+    return sample_resets
+
+def plot_mcu(data, maxbw):
+    # Generate data for plot
+    basetime = lasttime = data[0]['#sampletime']
+    lastbw = float(data[0]['bytes_write']) + float(data[0]['bytes_retransmit'])
+    sample_resets = find_print_restarts(data)
+    times = []
+    bwdeltas = []
+    loads = []
+    awake = []
+    hostbuffers = []
+    for d in data:
+        st = d['#sampletime']
+        timedelta = st - lasttime
+        if timedelta <= 0.:
+            continue
+        bw = float(d['bytes_write']) + float(d['bytes_retransmit'])
+        if bw < lastbw:
+            lastbw = bw
+            continue
+        load = float(d['mcu_task_avg']) + 3*float(d['mcu_task_stddev'])
+        if st - basetime < 15.:
+            load = 0.
+        pt = float(d['print_time'])
+        hb = float(d['buffer_time'])
+        if hb >= MAXBUFFER or st in sample_resets:
+            hb = 0.
+        else:
+            hb = 100. * (MAXBUFFER - hb) / MAXBUFFER
+        hostbuffers.append(hb)
+        times.append(datetime.datetime.utcfromtimestamp(st))
+        bwdeltas.append(100. * (bw - lastbw) / (maxbw * timedelta))
+        loads.append(100. * load / TASK_MAX)
+        awake.append(100. * float(d.get('mcu_awake', 0.)) / STATS_INTERVAL)
+        lasttime = st
+        lastbw = bw
+
+    # Build plot
+    fig, ax1 = matplotlib.pyplot.subplots()
+    ax1.set_title("MCU bandwidth and load utilization")
+    ax1.set_xlabel('Time')
+    ax1.set_ylabel('Usage (%)')
+    ax1.plot_date(times, bwdeltas, 'g', label='Bandwidth', alpha=0.8)
+    ax1.plot_date(times, loads, 'r', label='MCU load', alpha=0.8)
+    ax1.plot_date(times, hostbuffers, 'c', label='Host buffer', alpha=0.8)
+    ax1.plot_date(times, awake, 'y', label='Awake time', alpha=0.6)
+    fontP = matplotlib.font_manager.FontProperties()
+    fontP.set_size('x-small')
+    ax1.legend(loc='best', prop=fontP)
+    ax1.xaxis.set_major_formatter(matplotlib.dates.DateFormatter('%H:%M'))
+    ax1.grid(True)
+    return fig
+
+def plot_system(data):
+    # Generate data for plot
+    lasttime = data[0]['#sampletime']
+    lastcputime = float(data[0]['cputime'])
+    times = []
+    sysloads = []
+    cputimes = []
+    memavails = []
+    for d in data:
+        st = d['#sampletime']
+        timedelta = st - lasttime
+        if timedelta <= 0.:
+            continue
+        lasttime = st
+        times.append(datetime.datetime.utcfromtimestamp(st))
+        cputime = float(d['cputime'])
+        cpudelta = max(0., min(1.5, (cputime - lastcputime) / timedelta))
+        lastcputime = cputime
+        cputimes.append(cpudelta * 100.)
+        sysloads.append(float(d['sysload']) * 100.)
+        memavails.append(float(d['memavail']))
+
+    # Build plot
+    fig, ax1 = matplotlib.pyplot.subplots()
+    ax1.set_title("System load utilization")
+    ax1.set_xlabel('Time')
+    ax1.set_ylabel('Load (% of a core)')
+    ax1.plot_date(times, sysloads, '-', label='system load',
+                  color='cyan', alpha=0.8)
+    ax1.plot_date(times, cputimes, '-', label='process time',
+                  color='red', alpha=0.8)
+    ax2 = ax1.twinx()
+    ax2.set_ylabel('Available memory (KB)')
+    ax2.plot_date(times, memavails, '-', label='system memory',
+                  color='yellow', alpha=0.3)
+    fontP = matplotlib.font_manager.FontProperties()
+    fontP.set_size('x-small')
+    ax1li, ax1la = ax1.get_legend_handles_labels()
+    ax2li, ax2la = ax2.get_legend_handles_labels()
+    ax1.legend(ax1li + ax2li, ax1la + ax2la, loc='best', prop=fontP)
+    ax1.xaxis.set_major_formatter(matplotlib.dates.DateFormatter('%H:%M'))
+    ax1.grid(True)
+    return fig
+
+def plot_frequency(data, mcu):
+    all_keys = {}
+    for d in data:
+        all_keys.update(d)
+    one_mcu = mcu is not None
+    graph_keys = { key: ([], []) for key in all_keys
+                   if (key in ("freq", "adj") or (not one_mcu and (
+                           key.endswith(":freq") or key.endswith(":adj")))) }
+    for d in data:
+        st = datetime.datetime.utcfromtimestamp(d['#sampletime'])
+        for key, (times, values) in graph_keys.items():
+            val = d.get(key)
+            if val not in (None, '0', '1'):
+                times.append(st)
+                values.append(float(val))
+
+    # Build plot
+    fig, ax1 = matplotlib.pyplot.subplots()
+    if one_mcu:
+        ax1.set_title("MCU '%s' frequency" % (mcu,))
+    else:
+        ax1.set_title("MCU frequency")
+    ax1.set_xlabel('Time')
+    ax1.set_ylabel('Frequency')
+    for key in sorted(graph_keys):
+        times, values = graph_keys[key]
+        ax1.plot_date(times, values, '.', label=key)
+    fontP = matplotlib.font_manager.FontProperties()
+    fontP.set_size('x-small')
+    ax1.legend(loc='best', prop=fontP)
+    ax1.xaxis.set_major_formatter(matplotlib.dates.DateFormatter('%H:%M'))
+    ax1.yaxis.set_major_formatter(matplotlib.ticker.FormatStrFormatter('%d'))
+    ax1.grid(True)
+    return fig
+
+def plot_temperature(data, heaters):
+    fig, ax1 = matplotlib.pyplot.subplots()
+    ax2 = ax1.twinx()
+    for heater in heaters.split(','):
+        heater = heater.strip()
+        temp_key = heater + ':' + 'temp'
+        target_key = heater + ':' + 'target'
+        pwm_key = heater + ':' + 'pwm'
+        times = []
+        temps = []
+        targets = []
+        pwm = []
+        for d in data:
+            temp = d.get(temp_key)
+            if temp is None:
+                continue
+            times.append(datetime.datetime.utcfromtimestamp(d['#sampletime']))
+            temps.append(float(temp))
+            pwm.append(float(d.get(pwm_key, 0.)))
+            targets.append(float(d.get(target_key, 0.)))
+        ax1.plot_date(times, temps, '-', label='%s temp' % (heater,), alpha=0.8)
+        if any(targets):
+            label = '%s target' % (heater,)
+            ax1.plot_date(times, targets, '-', label=label, alpha=0.3)
+        if any(pwm):
+            label = '%s pwm' % (heater,)
+            ax2.plot_date(times, pwm, '-', label=label, alpha=0.2)
+    # Build plot
+    ax1.set_title("Temperature of %s" % (heaters,))
+    ax1.set_xlabel('Time')
+    ax1.set_ylabel('Temperature')
+    ax2.set_ylabel('pwm')
+    fontP = matplotlib.font_manager.FontProperties()
+    fontP.set_size('x-small')
+    ax1li, ax1la = ax1.get_legend_handles_labels()
+    ax2li, ax2la = ax2.get_legend_handles_labels()
+    ax1.legend(ax1li + ax2li, ax1la + ax2la, loc='best', prop=fontP)
+    ax1.xaxis.set_major_formatter(matplotlib.dates.DateFormatter('%H:%M'))
+    ax1.grid(True)
+    return fig
+
+def main():
+    # Parse command-line arguments
+    usage = "%prog [options] <logfile>"
+    opts = optparse.OptionParser(usage)
+    opts.add_option("-f", "--frequency", action="store_true",
+                    help="graph mcu frequency")
+    opts.add_option("-s", "--system", action="store_true",
+                    help="graph system load")
+    opts.add_option("-o", "--output", type="string", dest="output",
+                    default=None, help="filename of output graph")
+    opts.add_option("-t", "--temperature", type="string", dest="heater",
+                    default=None, help="graph heater temperature")
+    opts.add_option("-m", "--mcu", type="string", dest="mcu", default=None,
+                    help="limit stats to the given mcu")
+    options, args = opts.parse_args()
+    if len(args) != 1:
+        opts.error("Incorrect number of arguments")
+    logname = args[0]
+
+    # Parse data
+    data = parse_log(logname, options.mcu)
+    if not data:
+        return
+
+    # Draw graph
+    setup_matplotlib(options.output is not None)
+    if options.heater is not None:
+        fig = plot_temperature(data, options.heater)
+    elif options.frequency:
+        fig = plot_frequency(data, options.mcu)
+    elif options.system:
+        fig = plot_system(data)
+    else:
+        fig = plot_mcu(data, MAXBANDWIDTH)
+
+    # Show graph
+    if options.output is None:
+        matplotlib.pyplot.show()
+    else:
+        fig.set_size_inches(8, 6)
+        fig.savefig(options.output)
+
+if __name__ == '__main__':
+    main()

scripts/install-arch.sh

@@ -0,0 +1,102 @@
+#!/bin/bash
+# This script installs Klipper on an Arch Linux system
+
+PYTHONDIR="${HOME}/klippy-env"
+SYSTEMDDIR="/etc/systemd/system"
+AURCLIENT="pamac"
+KLIPPER_USER=$USER
+KLIPPER_GROUP=$KLIPPER_USER
+
+# Step 1: Install system packages
+install_packages()
+{
+    # Packages for python cffi
+    PKGLIST="python2-virtualenv libffi base-devel"
+    # kconfig requirements
+    PKGLIST="${PKGLIST} ncurses"
+    # hub-ctrl
+    PKGLIST="${PKGLIST} libusb"
+    # AVR chip installation and building
+    PKGLIST="${PKGLIST} avrdude avr-gcc avr-binutils avr-libc"
+    # ARM chip installation and building
+    AURLIST="stm32flash"
+    PKGLIST="${PKGLIST} arm-none-eabi-newlib"
+    PKGLIST="${PKGLIST} arm-none-eabi-gcc arm-none-eabi-binutils"
+
+    # Install desired packages
+     report_status "Installing packages..."
+     sudo pacman -S ${PKGLIST}
+     $AURCLIENT build ${AURLIST}
+}
+
+# Step 2: Create python virtual environment
+create_virtualenv()
+{
+    report_status "Updating python virtual environment..."
+
+    # Create virtualenv if it doesn't already exist
+    [ ! -d ${PYTHONDIR} ] && virtualenv2 ${PYTHONDIR}
+
+    # Install/update dependencies
+    ${PYTHONDIR}/bin/pip install -r ${SRCDIR}/scripts/klippy-requirements.txt
+}
+
+# Step 3: Install startup script
+install_script()
+{
+# Create systemd service file
+    KLIPPER_LOG=/tmp/klippy.log
+    report_status "Installing system start script..."
+    sudo /bin/sh -c "cat > $SYSTEMDDIR/klipper.service" << EOF
+#Systemd service file for klipper
+[Unit]
+Description=Starts klipper on startup
+After=network.target
+
+[Install]
+WantedBy=multi-user.target
+
+[Service]
+Type=simple
+User=$KLIPPER_USER
+RemainAfterExit=yes
+ExecStart=${PYTHONDIR}/bin/python ${SRCDIR}/klippy/klippy.py ${HOME}/printer.cfg -l ${KLIPPER_LOG}
+EOF
+# Use systemctl to enable the klipper systemd service script
+    sudo systemctl enable klipper.service
+    report_status "Make sure to add $KLIPPER_USER to the user group controlling your serial printer port"
+}
+
+# Step 4: Start host software
+start_software()
+{
+    report_status "Launching Klipper host software..."
+    sudo systemctl start klipper
+}
+
+# Helper functions
+report_status()
+{
+    echo -e "\n\n###### $1"
+}
+
+verify_ready()
+{
+    if [ "$EUID" -eq 0 ]; then
+        echo "This script must not run as root"
+        exit -1
+    fi
+}
+
+# Force script to exit if an error occurs
+set -e
+
+# Find SRCDIR from the pathname of this script
+SRCDIR="$( cd "$( dirname "${BASH_SOURCE[0]}" )"/.. && pwd )"
+
+# Run installation steps defined above
+verify_ready
+install_packages
+create_virtualenv
+install_script
+start_software

scripts/install-beaglebone.sh

@@ -0,0 +1,73 @@
+#!/bin/bash
+# This script installs Klipper on a Beaglebone running Debian Jessie
+# for use with its PRU micro-controller.
+
+# Step 1: Do main install
+install_main()
+{
+    # Run the debian script - should
+    # work.
+    ${SRCDIR}/scripts/install-debian.sh
+}
+
+# Step 2: Install additional system packages
+install_packages()
+{
+    # Install desired packages
+    PKGLIST="gcc-pru"
+
+    report_status "Installing beaglebone packages..."
+    sudo apt-get install --yes ${PKGLIST}
+}
+
+# Step 3: Install startup script
+install_script()
+{
+    report_status "Installing pru start script..."
+    sudo cp "${SRCDIR}/scripts/klipper-pru-start.sh" /etc/init.d/klipper_pru
+    sudo update-rc.d klipper_pru defaults
+}
+
+# Step 4: Install pru udev rule
+install_udev()
+{
+    report_status "Installing pru udev rule..."
+    sudo /bin/sh -c "cat > /etc/udev/rules.d/pru.rules" <<EOF
+KERNEL=="rpmsg_pru30", GROUP="tty", MODE="0660"
+EOF
+}
+
+# Step 5: Add user to tty group
+install_groups()
+{
+    report_status "Adding $USER to tty group..."
+    sudo adduser $USER tty
+}
+
+# Helper functions
+report_status()
+{
+    echo -e "\n\n###### $1"
+}
+
+verify_ready()
+{
+    if [ "$EUID" -eq 0 ]; then
+        echo "This script must not run as root"
+        exit -1
+    fi
+}
+
+# Force script to exit if an error occurs
+set -e
+
+# Find SRCDIR from the pathname of this script
+SRCDIR="$( cd "$( dirname "${BASH_SOURCE[0]}" )"/.. && pwd )"
+
+# Run installation steps defined above
+verify_ready
+install_main
+install_packages
+install_script
+install_udev
+install_groups

scripts/install-centos.sh

@@ -0,0 +1,101 @@
+#!/bin/bash
+# This script installs Klipper on an x86_64 machine running the
+# CentOS 7 distribution.
+
+PYTHONDIR="${HOME}/klippy-env"
+SYSTEMDDIR="/etc/systemd/system"
+
+# Step 1: Install system packages
+install_packages()
+{
+    # Packages for python cffi
+    PKGLIST="python-virtualenv libffi-devel"
+    # kconfig requirements
+    PKGLIST="${PKGLIST} ncurses-devel"
+    # hub-ctrl
+    PKGLIST="${PKGLIST} libusb-devel"
+    # AVR chip installation and building
+    PKGLIST="${PKGLIST} avrdude gcc-avr32-linux-gnu binutils-avr32-linux-gnu avr-libc"
+    # ARM chip installation and building
+    # CentOS/Fedora do not appear to have these packages available at this time
+    PKGLIST="${PKGLIST} arm-none-eabi-gcc-cs arm-none-eabi-newlib"
+
+    # Install desired packages
+    report_status "Installing packages..."
+    sudo yum install -y ${PKGLIST}
+}
+
+# Step 2: Create python virtual environment
+create_virtualenv()
+{
+    report_status "Updating python virtual environment..."
+
+    # Create virtualenv if it doesn't already exist
+    [ ! -d ${PYTHONDIR} ] && virtualenv -p python2 ${PYTHONDIR}
+
+    # Install/update dependencies
+    ${PYTHONDIR}/bin/pip install -r ${SRCDIR}/scripts/klippy-requirements.txt
+}
+
+# Step 3: Install startup script
+install_script()
+{
+# Create systemd service file
+    report_status "Installing system start script..."
+    sudo /bin/sh -c "cat > $SYSTEMDDIR/klipper.service" << EOF
+#Systemd service file for klipper
+[Unit]
+Description=Starts klipper on startup
+After=network.target
+
+[Install]
+WantedBy=multi-user.target
+
+[Service]
+Type=simple
+User=$USER
+RemainAfterExit=yes
+ExecStart=${PYTHONDIR}/bin/python ${SRCDIR}/klippy/klippy.py ${HOME}/printer.cfg -l /var/log/klippy.log
+EOF
+# Use systemctl to enable the klipper systemd service script
+    sudo systemctl enable klipper.service
+}
+
+# Configuration for systemctl klipper
+
+KLIPPY_USER=$USER
+
+
+# Step 5: Start host software
+start_software()
+{
+    report_status "Launching Klipper host software..."
+    sudo systemctl restart klipper
+}
+
+# Helper functions
+report_status()
+{
+    echo -e "\n\n###### $1"
+}
+
+verify_ready()
+{
+    if [ "$EUID" -eq 0 ]; then
+        echo "This script must not run as root"
+        exit -1
+    fi
+}
+
+# Force script to exit if an error occurs
+set -e
+
+# Find SRCDIR from the pathname of this script
+SRCDIR="$( cd "$( dirname "${BASH_SOURCE[0]}" )"/.. && pwd )"
+
+# Run installation steps defined above
+verify_ready
+install_packages
+create_virtualenv
+install_script
+start_software

scripts/install-debian.sh

@@ -0,0 +1,105 @@
+#!/bin/bash
+# This script installs Klipper on an debian
+#
+
+PYTHONDIR="${HOME}/klippy-env"
+SYSTEMDDIR="/etc/systemd/system"
+KLIPPER_USER=$USER
+KLIPPER_GROUP=$KLIPPER_USER
+
+# Step 1: Install system packages
+install_packages()
+{
+    # Packages for python cffi
+    PKGLIST="virtualenv python-dev libffi-dev build-essential"
+    # kconfig requirements
+    PKGLIST="${PKGLIST} libncurses-dev"
+    # hub-ctrl
+    PKGLIST="${PKGLIST} libusb-dev"
+    # AVR chip installation and building
+    PKGLIST="${PKGLIST} avrdude gcc-avr binutils-avr avr-libc"
+    # ARM chip installation and building
+    PKGLIST="${PKGLIST} stm32flash libnewlib-arm-none-eabi"
+    PKGLIST="${PKGLIST} gcc-arm-none-eabi binutils-arm-none-eabi libusb-1.0"
+
+    # Update system package info
+    report_status "Running apt-get update..."
+    sudo apt-get update
+
+    # Install desired packages
+    report_status "Installing packages..."
+    sudo apt-get install --yes ${PKGLIST}
+}
+
+# Step 2: Create python virtual environment
+create_virtualenv()
+{
+    report_status "Updating python virtual environment..."
+
+    # Create virtualenv if it doesn't already exist
+    [ ! -d ${PYTHONDIR} ] && virtualenv -p python2 ${PYTHONDIR}
+
+    # Install/update dependencies
+    ${PYTHONDIR}/bin/pip install -r ${SRCDIR}/scripts/klippy-requirements.txt
+}
+
+# Step 3: Install startup script
+install_script()
+{
+# Create systemd service file
+    KLIPPER_LOG=/tmp/klippy.log
+    report_status "Installing system start script..."
+    sudo /bin/sh -c "cat > $SYSTEMDDIR/klipper.service" << EOF
+#Systemd service file for klipper
+[Unit]
+Description=Starts klipper on startup
+After=network.target
+
+[Install]
+WantedBy=multi-user.target
+
+[Service]
+Type=simple
+User=$KLIPPER_USER
+RemainAfterExit=yes
+ExecStart=${PYTHONDIR}/bin/python ${SRCDIR}/klippy/klippy.py ${HOME}/printer.cfg -l ${KLIPPER_LOG}
+Restart=always
+RestartSec=10
+EOF
+# Use systemctl to enable the klipper systemd service script
+    sudo systemctl enable klipper.service
+}
+
+# Step 4: Start host software
+start_software()
+{
+    report_status "Launching Klipper host software..."
+    sudo systemctl start klipper
+}
+
+# Helper functions
+report_status()
+{
+    echo -e "\n\n###### $1"
+}
+
+verify_ready()
+{
+    if [ "$EUID" -eq 0 ]; then
+        echo "This script must not run as root"
+        exit -1
+    fi
+}
+
+# Force script to exit if an error occurs
+set -e
+
+# Find SRCDIR from the pathname of this script
+SRCDIR="$( cd "$( dirname "${BASH_SOURCE[0]}" )"/.. && pwd )"
+
+# Run installation steps defined above
+verify_ready
+install_packages
+create_virtualenv
+install_script
+start_software

scripts/install-octopi.sh

@@ -0,0 +1,103 @@
+#!/bin/bash
+# This script installs Klipper on a Raspberry Pi machine running the
+# OctoPi distribution.
+
+PYTHONDIR="${HOME}/klippy-env"
+
+# Step 1: Install system packages
+install_packages()
+{
+    # Packages for python cffi
+    PKGLIST="virtualenv python-dev libffi-dev build-essential"
+    # kconfig requirements
+    PKGLIST="${PKGLIST} libncurses-dev"
+    # hub-ctrl
+    PKGLIST="${PKGLIST} libusb-dev"
+    # AVR chip installation and building
+    PKGLIST="${PKGLIST} avrdude gcc-avr binutils-avr avr-libc"
+    # ARM chip installation and building
+    PKGLIST="${PKGLIST} stm32flash dfu-util libnewlib-arm-none-eabi"
+    PKGLIST="${PKGLIST} gcc-arm-none-eabi binutils-arm-none-eabi libusb-1.0"
+
+    # Update system package info
+    report_status "Running apt-get update..."
+    sudo apt-get update
+
+    # Install desired packages
+    report_status "Installing packages..."
+    sudo apt-get install --yes ${PKGLIST}
+}
+
+# Step 2: Create python virtual environment
+create_virtualenv()
+{
+    report_status "Updating python virtual environment..."
+
+    # Create virtualenv if it doesn't already exist
+    [ ! -d ${PYTHONDIR} ] && virtualenv -p python2 ${PYTHONDIR}
+
+    # Install/update dependencies
+    ${PYTHONDIR}/bin/pip install -r ${SRCDIR}/scripts/klippy-requirements.txt
+}
+
+# Step 3: Install startup script
+install_script()
+{
+    report_status "Installing system start script..."
+    sudo cp "${SRCDIR}/scripts/klipper-start.sh" /etc/init.d/klipper
+    sudo update-rc.d klipper defaults
+}
+
+# Step 4: Install startup script config
+install_config()
+{
+    DEFAULTS_FILE=/etc/default/klipper
+    [ -f $DEFAULTS_FILE ] && return
+
+    report_status "Installing system start configuration..."
+    sudo /bin/sh -c "cat > $DEFAULTS_FILE" <<EOF
+# Configuration for /etc/init.d/klipper
+
+KLIPPY_USER=$USER
+
+KLIPPY_EXEC=${PYTHONDIR}/bin/python
+
+KLIPPY_ARGS="${SRCDIR}/klippy/klippy.py ${HOME}/printer.cfg -l /tmp/klippy.log"
+
+EOF
+}
+
+# Step 5: Start host software
+start_software()
+{
+    report_status "Launching Klipper host software..."
+    sudo /etc/init.d/klipper restart
+}
+
+# Helper functions
+report_status()
+{
+    echo -e "\n\n###### $1"
+}
+
+verify_ready()
+{
+    if [ "$EUID" -eq 0 ]; then
+        echo "This script must not run as root"
+        exit -1
+    fi
+}
+
+# Force script to exit if an error occurs
+set -e
+
+# Find SRCDIR from the pathname of this script
+SRCDIR="$( cd "$( dirname "${BASH_SOURCE[0]}" )"/.. && pwd )"
+
+# Run installation steps defined above
+verify_ready
+install_packages
+create_virtualenv
+install_script
+install_config
+start_software

scripts/install-ubuntu-18.04.sh

@@ -0,0 +1,102 @@
+#!/bin/bash
+# This script installs Klipper on an Ubuntu 18.04 machine with Octoprint
+
+PYTHONDIR="${HOME}/klippy-env"
+SYSTEMDDIR="/etc/systemd/system"
+KLIPPER_USER=$USER
+KLIPPER_GROUP=$KLIPPER_USER
+
+# Step 1: Install system packages
+install_packages()
+{
+    # Packages for python cffi
+    PKGLIST="virtualenv python-dev libffi-dev build-essential"
+    # kconfig requirements
+    PKGLIST="${PKGLIST} libncurses-dev"
+    # hub-ctrl
+    PKGLIST="${PKGLIST} libusb-dev"
+    # AVR chip installation and building
+    PKGLIST="${PKGLIST} avrdude gcc-avr binutils-avr avr-libc"
+    # ARM chip installation and building
+    PKGLIST="${PKGLIST} stm32flash libnewlib-arm-none-eabi"
+    PKGLIST="${PKGLIST} gcc-arm-none-eabi binutils-arm-none-eabi libusb-1.0"
+
+    # Update system package info
+    report_status "Running apt-get update..."
+    sudo apt-get update
+
+    # Install desired packages
+    report_status "Installing packages..."
+    sudo apt-get install --yes ${PKGLIST}
+}
+
+# Step 2: Create python virtual environment
+create_virtualenv()
+{
+    report_status "Updating python virtual environment..."
+
+    # Create virtualenv if it doesn't already exist
+    [ ! -d ${PYTHONDIR} ] && virtualenv -p python2 ${PYTHONDIR}
+
+    # Install/update dependencies
+    ${PYTHONDIR}/bin/pip install -r ${SRCDIR}/scripts/klippy-requirements.txt
+}
+
+# Step 3: Install startup script
+install_script()
+{
+# Create systemd service file
+    KLIPPER_LOG=/tmp/klippy.log
+    report_status "Installing system start script..."
+    sudo /bin/sh -c "cat > $SYSTEMDDIR/klipper.service" << EOF
+#Systemd service file for klipper
+[Unit]
+Description=Starts klipper on startup
+After=network.target
+
+[Install]
+WantedBy=multi-user.target
+
+[Service]
+Type=simple
+User=$KLIPPER_USER
+RemainAfterExit=yes
+ExecStart=${PYTHONDIR}/bin/python ${SRCDIR}/klippy/klippy.py ${HOME}/printer.cfg -l ${KLIPPER_LOG}
+EOF
+# Use systemctl to enable the klipper systemd service script
+    sudo systemctl enable klipper.service
+}
+
+# Step 4: Start host software
+start_software()
+{
+    report_status "Launching Klipper host software..."
+    sudo systemctl start klipper
+}
+
+# Helper functions
+report_status()
+{
+    echo -e "\n\n###### $1"
+}
+
+verify_ready()
+{
+    if [ "$EUID" -eq 0 ]; then
+        echo "This script must not run as root"
+        exit -1
+    fi
+}
+
+# Force script to exit if an error occurs
+set -e
+
+# Find SRCDIR from the pathname of this script
+SRCDIR="$( cd "$( dirname "${BASH_SOURCE[0]}" )"/.. && pwd )"
+
+# Run installation steps defined above
+verify_ready
+install_packages
+create_virtualenv
+install_script
+start_software

scripts/klipper-mcu-start.sh

@@ -0,0 +1,78 @@
+#!/bin/sh
+# System startup script to start the MCU Linux firmware
+
+### BEGIN INIT INFO
+# Provides:          klipper_mcu
+# Required-Start:    $local_fs
+# Required-Stop:
+# Default-Start:     3 4 5
+# Default-Stop:      0 1 2 6
+# Short-Description: Klipper_MCU daemon
+# Description:       Starts the MCU for Klipper.
+### END INIT INFO
+
+PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
+DESC="klipper_mcu startup"
+NAME="klipper_mcu"
+KLIPPER_HOST_MCU=/usr/local/bin/klipper_mcu
+KLIPPER_HOST_ARGS="-r"
+PIDFILE=/var/run/klipper_mcu.pid
+
+. /lib/lsb/init-functions
+
+mcu_host_stop()
+{
+    # Shutdown existing Klipper instance (if applicable). The goal is to
+    # put the GPIO pins in a safe state.
+    if [ -c /tmp/klipper_host_mcu ]; then
+        log_daemon_msg "Attempting to shutdown host mcu..."
+        set -e
+        ( echo "FORCE_SHUTDOWN" > /tmp/klipper_host_mcu ) 2> /dev/null || ( log_action_msg "Firmware busy! Please shutdown Klipper and then retry." && exit 1 )
+        sleep 1
+        ( echo "FORCE_SHUTDOWN" > /tmp/klipper_host_mcu ) 2> /dev/null || ( log_action_msg "Firmware busy! Please shutdown Klipper and then retry." && exit 1 )
+        sleep 1
+        set +e
+    fi
+
+    log_daemon_msg "Stopping klipper host mcu" $NAME
+    killproc -p $PIDFILE $KLIPPER_HOST_MCU
+}
+
+mcu_host_start()
+{
+    [ -x $KLIPPER_HOST_MCU ] || return
+
+    if [ -c /tmp/klipper_host_mcu ]; then
+        mcu_host_stop
+    fi
+
+    log_daemon_msg "Starting klipper MCU" $NAME
+    start-stop-daemon --start --quiet --exec $KLIPPER_HOST_MCU \
+                      --background --pidfile $PIDFILE --make-pidfile \
+                      -- $KLIPPER_HOST_ARGS
+    log_end_msg $?
+}
+
+case "$1" in
+start)
+    mcu_host_start
+    ;;
+stop)
+    mcu_host_stop
+    ;;
+restart)
+    $0 stop
+    $0 start
+    ;;
+reload|force-reload)
+    log_daemon_msg "Reloading configuration not supported" $NAME
+    log_end_msg 1
+    ;;
+status)
+    status_of_proc -p $PIDFILE $KLIPPER_HOST_MCU $NAME && exit 0 || exit $?
+    ;;
+*)  log_action_msg "Usage: /etc/init.d/klipper_mcu {start|stop|status|restart|reload|force-reload}"
+    exit 2
+    ;;
+esac
+exit 0

scripts/klipper-pru-start.sh

@@ -0,0 +1,119 @@
+#!/bin/sh
+# System startup script to start the PRU firmware
+
+### BEGIN INIT INFO
+# Provides:          klipper_pru
+# Required-Start:    $local_fs
+# Required-Stop:
+# Default-Start:     3 4 5
+# Default-Stop:      0 1 2 6
+# Short-Description: Klipper_PRU daemon
+# Description:       Starts the PRU for Klipper.
+### END INIT INFO
+
+PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
+DESC="klipper_pru startup"
+NAME="klipper_pru"
+KLIPPER_HOST_MCU=/usr/local/bin/klipper_mcu
+KLIPPER_HOST_ARGS="-w -r"
+PIDFILE=/var/run/klipper_mcu.pid
+RPROC0=/sys/class/remoteproc/remoteproc1
+RPROC1=/sys/class/remoteproc/remoteproc2
+
+. /lib/lsb/init-functions
+
+pru_stop()
+{
+    # Shutdown existing Klipper instance (if applicable). The goal is to
+    # put the GPIO pins in a safe state.
+    if [ -c /dev/rpmsg_pru30 ]; then
+        log_daemon_msg "Attempting to shutdown PRU..."
+        set -e
+        ( echo "FORCE_SHUTDOWN" > /dev/rpmsg_pru30 ) 2> /dev/null || ( log_action_msg "Firmware busy! Please shutdown Klipper and then retry." && exit 1 )
+        sleep 1
+        ( echo "FORCE_SHUTDOWN" > /dev/rpmsg_pru30 ) 2> /dev/null || ( log_action_msg "Firmware busy! Please shutdown Klipper and then retry." && exit 1 )
+        sleep 1
+        set +e
+    fi
+
+    log_daemon_msg "Stopping pru"
+        echo 'stop' > $RPROC0/state
+        echo 'stop' > $RPROC1/state
+}
+
+pru_start()
+{
+    if [ -c /dev/rpmsg_pru30 ]; then
+        pru_stop
+    else
+        echo 'stop' > $RPROC0/state
+        echo 'stop' > $RPROC1/state
+    fi
+    sleep 1
+
+    log_daemon_msg "Starting pru"
+        echo 'start' > $RPROC0/state
+        echo 'start' > $RPROC1/state
+
+    # log_daemon_msg "Loading ADC module"
+    # echo 'BB-ADC' > /sys/devices/platform/bone_capemgr/slots
+}
+
+mcu_host_stop()
+{
+    # Shutdown existing Klipper instance (if applicable). The goal is to
+    # put the GPIO pins in a safe state.
+    if [ -c /tmp/klipper_host_mcu ]; then
+        log_daemon_msg "Attempting to shutdown host mcu..."
+        set -e
+        ( echo "FORCE_SHUTDOWN" > /tmp/klipper_host_mcu ) 2> /dev/null || ( log_action_msg "Firmware busy! Please shutdown Klipper and then retry." && exit 1 )
+        sleep 1
+        ( echo "FORCE_SHUTDOWN" > /tmp/klipper_host_mcu ) 2> /dev/null || ( log_action_msg "Firmware busy! Please shutdown Klipper and then retry." && exit 1 )
+        sleep 1
+        set +e
+    fi
+
+    log_daemon_msg "Stopping klipper host mcu" $NAME
+    killproc -p $PIDFILE $KLIPPER_HOST_MCU
+}
+
+mcu_host_start()
+{
+    [ -x $KLIPPER_HOST_MCU ] || return
+
+    if [ -c /tmp/klipper_host_mcu ]; then
+        mcu_host_stop
+    fi
+
+    log_daemon_msg "Starting klipper MCU" $NAME
+    start-stop-daemon --start --quiet --exec $KLIPPER_HOST_MCU \
+                      --background --pidfile $PIDFILE --make-pidfile \
+                      -- $KLIPPER_HOST_ARGS
+    log_end_msg $?
+}
+
+case "$1" in
+start)
+    pru_start
+    mcu_host_start
+    ;;
+stop)
+    pru_stop
+    mcu_host_stop
+    ;;
+restart)
+    $0 stop
+    $0 start
+    ;;
+reload|force-reload)
+    log_daemon_msg "Reloading configuration not supported" $NAME
+    log_end_msg 1
+    ;;
+status)
+    status_of_proc -p $PIDFILE $KLIPPER_HOST_MCU $NAME && exit 0 || exit $?
+    ;;
+*)  log_action_msg "Usage: /etc/init.d/klipper {start|stop|status|restart|reload|force-reload}"
+    exit 2
+    ;;
+esac
+exit 0

scripts/klipper-start.sh

@@ -0,0 +1,54 @@
+#!/bin/sh
+# System startup script for Klipper 3d-printer host code
+
+### BEGIN INIT INFO
+# Provides:          klipper
+# Required-Start:    $local_fs
+# Required-Stop:
+# Default-Start:     2 3 4 5
+# Default-Stop:      0 1 6
+# Short-Description: Klipper daemon
+# Description:       Starts the Klipper daemon.
+### END INIT INFO
+
+PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
+DESC="klipper daemon"
+NAME="klipper"
+DEFAULTS_FILE=/etc/default/klipper
+PIDFILE=/var/run/klipper.pid
+
+. /lib/lsb/init-functions
+
+# Read defaults file
+[ -r $DEFAULTS_FILE ] && . $DEFAULTS_FILE
+
+case "$1" in
+start)  log_daemon_msg "Starting klipper" $NAME
+        start-stop-daemon --start --quiet --exec $KLIPPY_EXEC \
+                          --background --pidfile $PIDFILE --make-pidfile \
+                          --chuid $KLIPPY_USER --user $KLIPPY_USER \
+                          -- $KLIPPY_ARGS
+        log_end_msg $?
+        ;;
+stop)   log_daemon_msg "Stopping klipper" $NAME
+        killproc -p $PIDFILE $KLIPPY_EXEC
+        RETVAL=$?
+        [ $RETVAL -eq 0 ] && [ -e "$PIDFILE" ] && rm -f $PIDFILE
+        log_end_msg $RETVAL
+        ;;
+restart) log_daemon_msg "Restarting klipper" $NAME
+        $0 stop
+        $0 start
+        ;;
+reload|force-reload)
+        log_daemon_msg "Reloading configuration not supported" $NAME
+        log_end_msg 1
+        ;;
+status)
+        status_of_proc -p $PIDFILE $KLIPPY_EXEC $NAME && exit 0 || exit $?
+        ;;
+*)      log_action_msg "Usage: /etc/init.d/klipper {start|stop|status|restart|reload|force-reload}"
+        exit 2
+        ;;
+esac
+exit 0

scripts/klipper-uninstall.sh

@@ -0,0 +1,23 @@
+#!/bin/bash
+# Uninstall script for raspbian/debian type installations
+
+# Stop Klipper Service
+echo "#### Stopping Klipper Service.."
+sudo service klipper stop
+
+# Remove Klipper from Startup
+echo
+echo "#### Removing Klipper from Startup.."
+sudo update-rc.d -f klipper remove
+
+# Remove Klipper from Services
+echo
+echo "#### Removing Klipper Service.."
+sudo rm -f /etc/init.d/klipper /etc/default/klipper
+
+# Notify user of method to remove Klipper source code
+echo
+echo "The Klipper system files have been removed."
+echo
+echo "The following command is typically used to remove local files:"
+echo "  rm -rf ~/klippy-env ~/klipper"

scripts/klippy-requirements.txt

@@ -0,0 +1,10 @@
+# This file describes the Python virtualenv package requirements for
+# the Klipper host software (Klippy).  These package requirements are
+# typically installed via the command:
+#   pip install -r klippy-requirements.txt
+cffi==1.14.6
+pyserial==3.4
+greenlet==1.1.2
+Jinja2==2.11.3
+python-can==3.3.4
+markupsafe==1.1.1

scripts/logextract.py

@@ -0,0 +1,610 @@
+#!/usr/bin/env python2
+# Script to extract config and shutdown information file a klippy.log file
+#
+# Copyright (C) 2017  Kevin O'Connor <kevin@koconnor.net>
+#
+# This file may be distributed under the terms of the GNU GPLv3 license.
+import sys, re, collections, ast
+
+def format_comment(line_num, line):
+    return "# %6d: %s" % (line_num, line)
+
+
+######################################################################
+# Config file extraction
+######################################################################
+
+class GatherConfig:
+    def __init__(self, configs, line_num, recent_lines, logname):
+        self.configs = configs
+        self.line_num = line_num
+        self.config_num = len(configs) + 1
+        self.filename = "%s.config%04d.cfg" % (logname, self.config_num)
+        self.config_lines = []
+        self.comments = []
+    def add_line(self, line_num, line):
+        if line != '=======================':
+            self.config_lines.append(line)
+            return True
+        self.finalize()
+        return False
+    def finalize(self):
+        lines = tuple(self.config_lines)
+        ch = self.configs.get(lines)
+        if ch is None:
+            self.configs[lines] = ch = self
+        else:
+            ch.comments.extend(self.comments)
+        ch.comments.append(format_comment(self.line_num, "config file"))
+    def add_comment(self, comment):
+        if comment is not None:
+            self.comments.append(comment)
+    def write_file(self):
+        f = open(self.filename, 'wb')
+        f.write('\n'.join(self.comments + self.config_lines).strip() + '\n')
+        f.close()
+
+
+######################################################################
+# TMC UART message parsing
+######################################################################
+
+uart_r = re.compile(r"tmcuart_(?:send|response) oid=[0-9]+ (?:read|write)=")
+
+class TMCUartHelper:
+    def _calc_crc8(self, data):
+        # Generate a CRC8-ATM value for a bytearray
+        crc = 0
+        for b in data:
+            for i in range(8):
+                if (crc >> 7) ^ (b & 0x01):
+                    crc = (crc << 1) ^ 0x07
+                else:
+                    crc = (crc << 1)
+                crc &= 0xff
+                b >>= 1
+        return crc
+    def _add_serial_bits(self, data):
+        # Add serial start and stop bits to a message in a bytearray
+        out = 0
+        pos = 0
+        for d in data:
+            b = (d << 1) | 0x200
+            out |= (b << pos)
+            pos += 10
+        res = bytearray()
+        for i in range((pos+7)//8):
+            res.append((out >> (i*8)) & 0xff)
+        return res
+    def _encode_read(self, sync, addr, reg):
+        # Generate a uart read register message
+        msg = bytearray([sync, addr, reg])
+        msg.append(self._calc_crc8(msg))
+        return self._add_serial_bits(msg)
+    def _encode_write(self, sync, addr, reg, val):
+        # Generate a uart write register message
+        msg = bytearray([sync, addr, reg, (val >> 24) & 0xff,
+                         (val >> 16) & 0xff, (val >> 8) & 0xff, val & 0xff])
+        msg.append(self._calc_crc8(msg))
+        return self._add_serial_bits(msg)
+    def _decode_read(self, data):
+        # Extract a uart read request message
+        if len(data) != 5:
+            return
+        # Convert data into a long integer for easy manipulation
+        mval = pos = 0
+        for d in bytearray(data):
+            mval |= d << pos
+            pos += 8
+        # Extract register value
+        addr = (mval >> 11) & 0xff
+        reg = (mval >> 21) & 0xff
+        # Verify start/stop bits and crc
+        encoded_data = self._encode_read(0xf5, addr, reg)
+        if data != encoded_data:
+            return "Invalid: %s" % (self.pretty_print(addr, reg),)
+        return self.pretty_print(addr, reg)
+    def _decode_reg(self, data):
+        # Extract a uart read response message
+        if len(data) != 10:
+            return
+        # Convert data into a long integer for easy manipulation
+        mval = pos = 0
+        for d in bytearray(data):
+            mval |= d << pos
+            pos += 8
+        # Extract register value
+        addr = (mval >> 11) & 0xff
+        reg = (mval >> 21) & 0xff
+        val = ((((mval >> 31) & 0xff) << 24) | (((mval >> 41) & 0xff) << 16)
+               | (((mval >> 51) & 0xff) << 8) | ((mval >> 61) & 0xff))
+        sync = 0xf5
+        if addr == 0xff:
+            sync = 0x05
+        # Verify start/stop bits and crc
+        encoded_data = self._encode_write(sync, addr, reg, val)
+        if data != encoded_data:
+            #print("Got %s vs %s" % (repr(data), repr(encoded_data)))
+            return "Invalid:%s" % (self.pretty_print(addr, reg, val),)
+        return self.pretty_print(addr, reg, val)
+    def pretty_print(self, addr, reg, val=None):
+        if val is None:
+            return "(%x@%x)" % (reg, addr)
+        if reg & 0x80:
+            return "(%x@%x=%08x)" % (reg & ~0x80, addr, val)
+        return "(%x@%x==%08x)" % (reg, addr, val)
+    def parse_msg(self, msg):
+        data = bytearray(msg)
+        if len(data) == 10:
+            return self._decode_reg(data)
+        elif len(data) == 5:
+            return self._decode_read(data)
+        elif len(data) == 0:
+            return ""
+        return "(length?)"
+
+
+######################################################################
+# Shutdown extraction
+######################################################################
+
+def add_high_bits(val, ref, mask):
+    half = (mask + 1) // 2
+    return ref + ((val - (ref & mask) + half) & mask) - half
+
+count_s = r"(?P<count>[0-9]+)"
+time_s = r"(?P<time>[0-9]+[.][0-9]+)"
+esttime_s = r"(?P<esttime>[0-9]+[.][0-9]+)"
+shortseq_s = r"(?P<shortseq>[0-9a-f])"
+sent_r = re.compile(r"^Sent " + count_s + " " + esttime_s + " " + time_s
+                    + " [0-9]+: seq: 1" + shortseq_s + ",")
+
+# MCU "Sent" shutdown message parsing
+class MCUSentStream:
+    def __init__(self, mcu, count):
+        self.mcu = mcu
+        self.sent_stream = []
+        self.send_count = count
+    def parse_line(self, line_num, line):
+        m = sent_r.match(line)
+        if m is not None:
+            shortseq = int(m.group('shortseq'), 16)
+            seq = (self.mcu.shutdown_seq + int(m.group('count'))
+                   - self.send_count)
+            seq = add_high_bits(shortseq, seq, 0xf)
+            ts = float(m.group('time'))
+            esttime = float(m.group('esttime'))
+            self.mcu.sent_time_to_seq[(esttime, seq & 0xf)] = seq
+            self.mcu.sent_seq_to_time[seq] = ts
+            line = self.mcu.annotate(line, seq, ts)
+            self.sent_stream.append((ts, line_num, line))
+            return True, None
+        return self.mcu.parse_line(line_num, line)
+    def get_lines(self):
+        return self.sent_stream
+
+receive_r = re.compile(r"^Receive: " + count_s + " " + time_s + " " + esttime_s
+                       + " [0-9]+: seq: 1" + shortseq_s + ",")
+
+# MCU "Receive" shutdown message parsing
+class MCUReceiveStream:
+    def __init__(self, mcu):
+        self.mcu = mcu
+        self.receive_stream = []
+    def parse_line(self, line_num, line):
+        m = receive_r.match(line)
+        if m is not None:
+            shortseq = int(m.group('shortseq'), 16)
+            ts = float(m.group('time'))
+            esttime = float(m.group('esttime'))
+            seq = self.mcu.sent_time_to_seq.get((esttime, (shortseq - 1) & 0xf))
+            if seq is not None:
+                self.mcu.receive_seq_to_time[seq + 1] = ts
+            line = self.mcu.annotate(line, seq, ts)
+            self.receive_stream.append((ts, line_num, line))
+            return True, None
+        return self.mcu.parse_line(line_num, line)
+    def get_lines(self):
+        return self.receive_stream
+
+stats_seq_s = r" send_seq=(?P<sseq>[0-9]+) receive_seq=(?P<rseq>[0-9]+) "
+serial_dump_r = re.compile(r"^Dumping serial stats: .*" + stats_seq_s)
+send_dump_r = re.compile(r"^Dumping send queue " + count_s + " messages$")
+receive_dump_r = re.compile(r"^Dumping receive queue " + count_s + " messages$")
+clock_r = re.compile(r"^clocksync state: mcu_freq=(?P<freq>[0-9]+) .*"
+                     + r" clock_est=\((?P<st>[^ ]+)"
+                     + r" (?P<sc>[0-9]+) (?P<f>[^ ]+)\)")
+repl_seq_r = re.compile(r": seq: 1" + shortseq_s)
+clock_s = r"(?P<clock>[0-9]+)"
+repl_clock_r = re.compile(r"clock=" + clock_s + r"(?: |$)")
+repl_uart_r = re.compile(r"tmcuart_(?:response|send) oid=[0-9]+"
+                         + r" (?:read|write)=(?P<msg>(?:'[^']*'"
+                         + r'|"[^"]*"))(?: |$)')
+
+# MCU shutdown message parsing
+class MCUStream:
+    def __init__(self, name):
+        self.name = name
+        self.sent_time_to_seq = {}
+        self.sent_seq_to_time = {}
+        self.receive_seq_to_time = {}
+        self.mcu_freq = 1
+        self.clock_est = (0., 0., 1.)
+        self.shutdown_seq = None
+    def trans_clock(self, clock, ts):
+        sample_time, sample_clock, freq = self.clock_est
+        exp_clock = int(sample_clock + (ts - sample_time) * freq)
+        ext_clock = add_high_bits(clock, exp_clock, 0xffffffff)
+        return sample_time + (ext_clock - sample_clock) / freq
+    def annotate(self, line, seq, ts):
+        if seq is not None:
+            line = repl_seq_r.sub(r"\g<0>(%d)" % (seq,), line)
+        def clock_update(m):
+            return m.group(0).rstrip() + "(%.6f) " % (
+                self.trans_clock(int(m.group('clock')), ts),)
+        line = repl_clock_r.sub(clock_update, line)
+        def uart_update(m):
+            msg = TMCUartHelper().parse_msg(ast.literal_eval(m.group('msg')))
+            return m.group(0).rstrip() + "%s " % (msg,)
+        line = repl_uart_r.sub(uart_update, line)
+        if self.name != 'mcu':
+            line = "mcu '%s': %s" % (self.name, line)
+        return line
+    def parse_line(self, line_num, line):
+        m = clock_r.match(line)
+        if m is not None:
+            self.mcu_freq = int(m.group('freq'))
+            st = float(m.group('st'))
+            sc = int(m.group('sc'))
+            f = float(m.group('f'))
+            self.clock_est = (st, sc, f)
+        m = serial_dump_r.match(line)
+        if m is not None:
+            self.shutdown_seq = int(m.group('rseq'))
+        m = send_dump_r.match(line)
+        if m is not None:
+            return True, MCUSentStream(self, int(m.group('count')))
+        m = receive_dump_r.match(line)
+        if m is not None:
+            return True, MCUReceiveStream(self)
+        return False, None
+    def get_lines(self):
+        return []
+
+stepper_move_r = re.compile(r"^queue_step " + count_s + r": t=" + clock_s
+                            + r" ")
+
+# Kinematic "trapq" shutdown message parsing
+class StepperStream:
+    def __init__(self, name, mcu_name, mcus):
+        self.name = name
+        self.stepper_stream = []
+        self.clock_est = (0., 0., 1.)
+        mcu = mcus.get(mcu_name)
+        if mcu is not None:
+            self.clock_est = mcu.clock_est
+    def parse_line(self, line_num, line):
+        m = stepper_move_r.match(line)
+        if m is not None:
+            # Convert clock to systime
+            clock = int(m.group('clock'))
+            sample_time, sample_clock, freq = self.clock_est
+            ts = sample_time + (clock - sample_clock) / freq
+            # Add systime to log
+            parts = line.split(' ', 4)
+            parts[0] = "%s queue_step" % (self.name,)
+            parts[2] += '(%.6f)' % (ts,)
+            self.stepper_stream.append((ts, line_num, ' '.join(parts)))
+            return True, None
+        return False, None
+    def get_lines(self):
+        return self.stepper_stream
+
+trapq_move_r = re.compile(r"^move " + count_s + r": pt=" + time_s)
+
+# Kinematic "trapq" shutdown message parsing
+class TrapQStream:
+    def __init__(self, name, mcus):
+        self.name = name
+        self.trapq_stream = []
+        self.mcu_freq = 1
+        self.clock_est = (0., 0., 1.)
+        mcu = mcus.get("mcu")
+        if mcu is not None:
+            self.mcu_freq = mcu.mcu_freq
+            self.clock_est = mcu.clock_est
+    def parse_line(self, line_num, line):
+        m = trapq_move_r.match(line)
+        if m is not None:
+            # Convert print_time to systime
+            pt = float(m.group('time'))
+            clock = pt * self.mcu_freq
+            sample_time, sample_clock, freq = self.clock_est
+            ts = sample_time + (clock - sample_clock) / freq
+            # Add systime to log
+            parts = line.split(' ', 4)
+            parts[0] = "%s move" % (self.name,)
+            parts[2] += '(%.6f)' % (ts,)
+            self.trapq_stream.append((ts, line_num, ' '.join(parts)))
+            return True, None
+        return False, None
+    def get_lines(self):
+        return self.trapq_stream
+
+gcode_cmd_r = re.compile(r"^Read " + time_s + r": (?P<gcode>['\"].*)$")
+varlist_split_r = re.compile(r"([^ ]+)=")
+
+# G-Code shutdown message parsing
+class GCodeStream:
+    def __init__(self, shutdown_line_num, logname):
+        self.gcode_stream = []
+        self.gcode_commands = []
+        self.gcode_state = ''
+        self.gcode_filename = "%s.gcode%05d" % (logname, shutdown_line_num)
+    def extract_params(self, line):
+        parts = varlist_split_r.split(line)
+        try:
+            return { parts[i]: ast.literal_eval(parts[i+1].strip())
+                     for i in range(1, len(parts), 2) }
+        except:
+            return {}
+    def handle_gcode_state(self, line):
+        kv = self.extract_params(line)
+        out = ['; Start g-code state restore', 'G28']
+        if not kv.get('absolute_coord', kv.get('absolutecoord')):
+            out.append('G91')
+        if not kv.get('absolute_extrude', kv.get('absoluteextrude')):
+            out.append('M83')
+        lp = kv['last_position']
+        out.append('G1 X%f Y%f Z%f F%f' % (
+            lp[0], lp[1], lp[2], kv['speed'] * 60.))
+        bp = kv['base_position']
+        if bp[:3] != [0., 0., 0.]:
+            out.append('; Must manually set base position...')
+        out.append('G92 E%f' % (lp[3] - bp[3],))
+        hp = kv['homing_position']
+        if hp != [0., 0., 0., 0.]:
+            out.append('; Must manually set homing position...')
+        if abs(kv['speed_factor'] - 1. / 60.) > .000001:
+            out.append('M220 S%f' % (kv['speed_factor'] * 60. * 100.,))
+        if kv['extrude_factor'] != 1.:
+            out.append('M221 S%f' % (kv['extrude_factor'] * 100.,))
+        out.extend(['; End of state restore', '', ''])
+        self.gcode_state = '\n'.join(out)
+    def parse_line(self, line_num, line):
+        m = gcode_cmd_r.match(line)
+        if m is not None:
+            ts = float(m.group('time'))
+            self.gcode_stream.append((ts, line_num, line))
+            self.gcode_commands.append(m.group('gcode'))
+            return True, None
+        return False, None
+    def get_lines(self):
+        # Produce output gcode stream
+        if self.gcode_stream:
+            data = [ast.literal_eval(gc) for gc in self.gcode_commands]
+            f = open(self.gcode_filename, 'wb')
+            f.write(self.gcode_state + ''.join(data))
+            f.close()
+        return self.gcode_stream
+
+api_cmd_r = re.compile(r"^Received " + time_s + r": \{.*\}$")
+
+# API server shutdowm message parsing
+class APIStream:
+    def __init__(self):
+        self.api_stream = []
+    def parse_line(self, line_num, line):
+        m = api_cmd_r.match(line)
+        if m is not None:
+            ts = float(m.group('time'))
+            self.api_stream.append((ts, line_num, line))
+            return True, None
+        return False, None
+    def get_lines(self):
+        return self.api_stream
+
+stats_r = re.compile(r"^Stats " + time_s + ": ")
+mcu_r = re.compile(r"MCU '(?P<mcu>[^']+)' (is_)?shutdown: (?P<reason>.*)$")
+stepper_r = re.compile(r"^Dumping stepper '(?P<name>[^']*)' \((?P<mcu>[^)]+)\) "
+                       + count_s + r" queue_step:$")
+trapq_r = re.compile(r"^Dumping trapq '(?P<name>[^']*)' " + count_s
+                     + r" moves:$")
+gcode_r = re.compile(r"Dumping gcode input " + count_s + r" blocks$")
+gcode_state_r = re.compile(r"^gcode state: ")
+api_r = re.compile(r"Dumping " + count_s + r" requests for client "
+                   + r"(?P<client>[0-9]+)" + r"$")
+
+# Stats message parsing and high-level message dispatch
+class StatsStream:
+    def __init__(self, shutdown_line_num, logname):
+        self.shutdown_line_num = shutdown_line_num
+        self.gcode_stream = GCodeStream(shutdown_line_num, logname)
+        self.mcus = {}
+        self.first_stat_time = self.last_stat_time = None
+        self.stats_stream = []
+    def reset_first_stat_time(self):
+        self.first_stat_time = self.last_stat_time
+    def get_stat_times(self):
+        return self.first_stat_time, self.last_stat_time
+    def check_stats_seq(self, ts, line):
+        # Parse stats
+        parts = line.split()
+        mcu = ""
+        keyparts = {}
+        for p in parts[2:]:
+            if '=' not in p:
+                mcu = p
+                continue
+            name, val = p.split('=', 1)
+            keyparts[mcu + name] = val
+        min_ts = 0
+        max_ts = 999999999999
+        for mcu_name, mcu in self.mcus.items():
+            sname = '%s:send_seq' % (mcu_name,)
+            rname = '%s:receive_seq' % (mcu_name,)
+            if sname not in keyparts:
+                continue
+            sseq = int(keyparts[sname])
+            rseq = int(keyparts[rname])
+            min_ts = max(min_ts, mcu.sent_seq_to_time.get(sseq-1, 0),
+                         mcu.receive_seq_to_time.get(rseq, 0))
+            max_ts = min(max_ts, mcu.sent_seq_to_time.get(sseq, 999999999999),
+                         mcu.receive_seq_to_time.get(rseq+1, 999999999999))
+        return min(max(ts, min_ts + 0.00000001), max_ts - 0.00000001)
+    def parse_line(self, line_num, line):
+        m = stats_r.match(line)
+        if m is not None:
+            ts = float(m.group('time'))
+            self.last_stat_time = ts
+            if self.first_stat_time is None:
+                self.first_stat_time = ts
+            self.stats_stream.append((ts, line_num, line))
+            return True, None
+        self.stats_stream.append((None, line_num, line))
+        m = mcu_r.match(line)
+        if m is not None:
+            mcu_name = m.group('mcu')
+            mcu_stream = MCUStream(mcu_name)
+            self.mcus[mcu_name] = mcu_stream
+            return True, mcu_stream
+        m = stepper_r.match(line)
+        if m is not None:
+            return True, StepperStream(m.group('name'), m.group('mcu'),
+                                       self.mcus)
+        m = trapq_r.match(line)
+        if m is not None:
+            return True, TrapQStream(m.group('name'), self.mcus)
+        m = gcode_r.match(line)
+        if m is not None:
+            return True, self.gcode_stream
+        m = gcode_state_r.match(line)
+        if m is not None:
+            self.gcode_stream.handle_gcode_state(line)
+            return True, None
+        m = api_r.match(line)
+        if m is not None:
+            return True, APIStream()
+        return False, None
+    def get_lines(self):
+        # Ignore old stats
+        all_ts = []
+        for mcu_name, mcu in self.mcus.items():
+            all_ts.extend(mcu.sent_seq_to_time.values())
+            all_ts.extend(mcu.receive_seq_to_time.values())
+        if not all_ts:
+            return []
+        min_stream_ts = min(all_ts)
+        max_stream_ts = max(all_ts)
+        for i, info in enumerate(self.stats_stream):
+            if info[0] is not None and info[0] >= min_stream_ts - 5.:
+                del self.stats_stream[:i]
+                break
+        # Improve accuracy of stats timestamps
+        last_ts = self.stats_stream[0][0]
+        for i, (ts, line_num, line) in enumerate(self.stats_stream):
+            if ts is not None:
+                last_ts = self.check_stats_seq(ts, line)
+            elif (line_num >= self.shutdown_line_num
+                  and last_ts <= max_stream_ts):
+                last_ts = max_stream_ts + 0.00000001
+            self.stats_stream[i] = (last_ts, line_num, line)
+        return self.stats_stream
+
+# Main handler for creating shutdown diagnostics file
+class GatherShutdown:
+    def __init__(self, configs, line_num, recent_lines, logname):
+        self.filename = "%s.shutdown%05d" % (logname, line_num)
+        self.comments = []
+        if configs:
+            configs_by_id = {c.config_num: c for c in configs.values()}
+            config = configs_by_id[max(configs_by_id.keys())]
+            config.add_comment(format_comment(line_num, recent_lines[-1][1]))
+            self.comments.append("# config %s" % (config.filename,))
+        self.stats_stream = StatsStream(line_num, logname)
+        self.active_streams = [self.stats_stream]
+        self.all_streams = list(self.active_streams)
+        for line_num, line in recent_lines:
+            self.parse_line(line_num, line)
+        self.stats_stream.reset_first_stat_time()
+    def add_comment(self, comment):
+        if comment is not None:
+            self.comments.append(comment)
+    def add_line(self, line_num, line):
+        self.parse_line(line_num, line)
+        first, last = self.stats_stream.get_stat_times()
+        if first is not None and last > first + 5.:
+            self.finalize()
+            return False
+        if (line.startswith('Git version')
+            or line.startswith('Start printer at')
+            or line == '===== Config file ====='):
+            self.finalize()
+            return False
+        return True
+    def parse_line(self, line_num, line):
+        for s in self.active_streams:
+            did_parse, new_stream = s.parse_line(line_num, line)
+            if did_parse:
+                if new_stream is not None:
+                    self.all_streams.append(new_stream)
+                    self.active_streams = [new_stream, self.stats_stream]
+                break
+    def finalize(self):
+        # Make sure no timestamp goes backwards
+        streams = [p.get_lines() for p in self.all_streams]
+        for s in streams:
+            for i in range(1, len(s)):
+                if s[i-1][0] > s[i][0]:
+                    s[i] = (s[i-1][0], s[i][1], s[i][2])
+        # Produce output sorted by timestamp
+        out = [i for s in streams for i in s]
+        out.sort()
+        out = [i[2] for i in out]
+        f = open(self.filename, 'wb')
+        f.write('\n'.join(self.comments + out))
+        f.close()
+
+
+######################################################################
+# Startup
+######################################################################
+
+def main():
+    logname = sys.argv[1]
+    last_git = last_start = None
+    configs = {}
+    handler = None
+    recent_lines = collections.deque([], 200)
+    # Parse log file
+    f = open(logname, 'rb')
+    for line_num, line in enumerate(f):
+        line = line.rstrip()
+        line_num += 1
+        recent_lines.append((line_num, line))
+        if handler is not None:
+            ret = handler.add_line(line_num, line)
+            if ret:
+                continue
+            recent_lines.clear()
+            handler = None
+        if line.startswith('Git version'):
+            last_git = format_comment(line_num, line)
+        elif line.startswith('Start printer at'):
+            last_start = format_comment(line_num, line)
+        elif line == '===== Config file =====':
+            handler = GatherConfig(configs, line_num, recent_lines, logname)
+            handler.add_comment(last_git)
+            handler.add_comment(last_start)
+        elif 'shutdown: ' in line or line.startswith('Dumping '):
+            handler = GatherShutdown(configs, line_num, recent_lines, logname)
+            handler.add_comment(last_git)
+            handler.add_comment(last_start)
+    if handler is not None:
+        handler.finalize()
+    # Write found config files
+    for cfg in configs.values():
+        cfg.write_file()
+
+if __name__ == '__main__':
+    main()

scripts/make_version.py

@@ -0,0 +1,31 @@
+#!/usr/bin/env python2
+# Get the version number for klippy
+#
+# Copyright (C) 2018  Lucas Fink <software@lfcode.ca>
+#
+# This file may be distributed under the terms of the GNU GPLv3 license.
+
+from __future__ import print_function
+
+import argparse
+import os
+import sys
+
+sys.path.append(os.path.join(os.path.dirname(__file__), '../klippy'))
+
+import util
+
+
+def main(argv):
+    p = argparse.ArgumentParser()
+    p.add_argument(
+        'distroname',
+        help='Name of distro this package is intended for'
+    )
+    args = p.parse_args()
+    print(util.get_git_version(from_file=False),
+          args.distroname.replace(' ', ''), sep='-')
+
+
+if __name__ == '__main__':
+    main(sys.argv[1:])

scripts/motan/analyzers.py

@@ -0,0 +1,283 @@
+# Log data analyzing functions
+#
+# Copyright (C) 2021  Kevin O'Connor <kevin@koconnor.net>
+#
+# This file may be distributed under the terms of the GNU GPLv3 license.
+import math, collections
+import readlog
+
+
+######################################################################
+# Analysis code
+######################################################################
+
+# Analyzer handlers: {name: class, ...}
+AHandlers = {}
+
+# Calculate a derivative (position to velocity, or velocity to accel)
+class GenDerivative:
+    ParametersMin = ParametersMax = 1
+    DataSets = [
+        ('derivative(<dataset>)', 'Derivative of the given dataset'),
+    ]
+    def __init__(self, amanager, name_parts):
+        self.amanager = amanager
+        self.source = name_parts[1]
+        amanager.setup_dataset(self.source)
+    def get_label(self):
+        label = self.amanager.get_label(self.source)
+        lname = label['label']
+        units = label['units']
+        if '(mm)' in units:
+            rep = [('Position', 'Velocity'), ('(mm)', '(mm/s)')]
+        elif '(mm/s)' in units:
+            rep = [('Velocity', 'Acceleration'), ('(mm/s)', '(mm/s^2)')]
+        else:
+            return {'label': 'Derivative', 'units': 'Unknown'}
+        for old, new in rep:
+            lname = lname.replace(old, new).replace(old.lower(), new.lower())
+            units = units.replace(old, new).replace(old.lower(), new.lower())
+        return {'label': lname, 'units': units}
+    def generate_data(self):
+        inv_seg_time = 1. / self.amanager.get_segment_time()
+        data = self.amanager.get_datasets()[self.source]
+        deriv = [(data[i+1] - data[i]) * inv_seg_time
+                 for i in range(len(data)-1)]
+        return [deriv[0]] + deriv
+AHandlers["derivative"] = GenDerivative
+
+# Calculate an integral (accel to velocity, or velocity to position)
+class GenIntegral:
+    ParametersMin = 1
+    ParametersMax = 3
+    DataSets = [
+        ('integral(<dataset>)', 'Integral of the given dataset'),
+        ('integral(<dataset1>,<dataset2>)',
+         'Integral with dataset2 as reference'),
+        ('integral(<dataset1>,<dataset2>,<half_life>)',
+         'Integral with weighted half-life time'),
+    ]
+    def __init__(self, amanager, name_parts):
+        self.amanager = amanager
+        self.source = name_parts[1]
+        amanager.setup_dataset(self.source)
+        self.ref = None
+        self.half_life = 0.015
+        if len(name_parts) >= 3:
+            self.ref = name_parts[2]
+            amanager.setup_dataset(self.ref)
+            if len(name_parts) == 4:
+                self.half_life = float(name_parts[3])
+    def get_label(self):
+        label = self.amanager.get_label(self.source)
+        lname = label['label']
+        units = label['units']
+        if '(mm/s)' in units:
+            rep = [('Velocity', 'Position'), ('(mm/s)', '(mm)')]
+        elif '(mm/s^2)' in units:
+            rep = [('Acceleration', 'Velocity'), ('(mm/s^2)', '(mm/s)')]
+        else:
+            return {'label': 'Integral', 'units': 'Unknown'}
+        for old, new in rep:
+            lname = lname.replace(old, new).replace(old.lower(), new.lower())
+            units = units.replace(old, new).replace(old.lower(), new.lower())
+        return {'label': lname, 'units': units}
+    def generate_data(self):
+        seg_time = self.amanager.get_segment_time()
+        src = self.amanager.get_datasets()[self.source]
+        offset = sum(src) / len(src)
+        total = 0.
+        ref = None
+        if self.ref is not None:
+            ref = self.amanager.get_datasets()[self.ref]
+            offset -= (ref[-1] - ref[0]) / (len(src) * seg_time)
+            total = ref[0]
+            src_weight = 1.
+            if self.half_life:
+                src_weight = math.exp(math.log(.5) * seg_time / self.half_life)
+            ref_weight = 1. - src_weight
+        data = [0.] * len(src)
+        for i, v in enumerate(src):
+            total += (v - offset) * seg_time
+            if ref is not None:
+                total = src_weight * total + ref_weight * ref[i]
+            data[i] = total
+        return data
+AHandlers["integral"] = GenIntegral
+
+# Calculate a kinematic stepper position from the toolhead requested position
+class GenKinematicPosition:
+    ParametersMin = ParametersMax = 1
+    DataSets = [
+        ('kin(<stepper>)', 'Stepper position derived from toolhead kinematics'),
+    ]
+    def __init__(self, amanager, name_parts):
+        self.amanager = amanager
+        stepper = name_parts[1]
+        status = self.amanager.get_initial_status()
+        kin = status['configfile']['settings']['printer']['kinematics']
+        if kin not in ['cartesian', 'corexy']:
+            raise amanager.error("Unsupported kinematics '%s'" % (kin,))
+        if stepper not in ['stepper_x', 'stepper_y', 'stepper_z']:
+            raise amanager.error("Unknown stepper '%s'" % (stepper,))
+        if kin == 'corexy' and stepper in ['stepper_x', 'stepper_y']:
+            self.source1 = 'trapq(toolhead,x)'
+            self.source2 = 'trapq(toolhead,y)'
+            if stepper == 'stepper_x':
+                self.generate_data = self.generate_data_corexy_plus
+            else:
+                self.generate_data = self.generate_data_corexy_minus
+            amanager.setup_dataset(self.source1)
+            amanager.setup_dataset(self.source2)
+        else:
+            self.source1 = 'trapq(toolhead,%s)' % (stepper[-1:],)
+            self.source2 = None
+            self.generate_data = self.generate_data_passthrough
+            amanager.setup_dataset(self.source1)
+    def get_label(self):
+        return {'label': 'Position', 'units': 'Position\n(mm)'}
+    def generate_data_corexy_plus(self):
+        datasets = self.amanager.get_datasets()
+        data1 = datasets[self.source1]
+        data2 = datasets[self.source2]
+        return [d1 + d2 for d1, d2 in zip(data1, data2)]
+    def generate_data_corexy_minus(self):
+        datasets = self.amanager.get_datasets()
+        data1 = datasets[self.source1]
+        data2 = datasets[self.source2]
+        return [d1 - d2 for d1, d2 in zip(data1, data2)]
+    def generate_data_passthrough(self):
+        return self.amanager.get_datasets()[self.source1]
+AHandlers["kin"] = GenKinematicPosition
+
+# Calculate a toolhead x/y position from corexy stepper positions
+class GenCorexyPosition:
+    ParametersMin = ParametersMax = 3
+    DataSets = [
+        ('corexy(x,<stepper>,<stepper>)', 'Toolhead x position from steppers'),
+        ('corexy(y,<stepper>,<stepper>)', 'Toolhead y position from steppers'),
+    ]
+    def __init__(self, amanager, name_parts):
+        self.amanager = amanager
+        self.is_plus = name_parts[1] == 'x'
+        self.source1, self.source2 = name_parts[2:]
+        amanager.setup_dataset(self.source1)
+        amanager.setup_dataset(self.source2)
+    def get_label(self):
+        axis = 'x'
+        if not self.is_plus:
+            axis = 'y'
+        return {'label': 'Derived %s position' % (axis,),
+                'units': 'Position\n(mm)'}
+    def generate_data(self):
+        datasets = self.amanager.get_datasets()
+        data1 = datasets[self.source1]
+        data2 = datasets[self.source2]
+        if self.is_plus:
+            return [.5 * (d1 + d2) for d1, d2 in zip(data1, data2)]
+        return [.5 * (d1 - d2) for d1, d2 in zip(data1, data2)]
+AHandlers["corexy"] = GenCorexyPosition
+
+# Calculate a position deviation
+class GenDeviation:
+    ParametersMin = ParametersMax = 2
+    DataSets = [
+        ('deviation(<dataset1>,<dataset2>)', 'Difference between datasets'),
+    ]
+    def __init__(self, amanager, name_parts):
+        self.amanager = amanager
+        self.source1, self.source2 = name_parts[1:]
+        amanager.setup_dataset(self.source1)
+        amanager.setup_dataset(self.source2)
+    def get_label(self):
+        label1 = self.amanager.get_label(self.source1)
+        label2 = self.amanager.get_label(self.source2)
+        if label1['units'] != label2['units']:
+            return {'label': 'Deviation', 'units': 'Unknown'}
+        parts = label1['units'].split('\n')
+        units = '\n'.join([parts[0]] + ['Deviation'] + parts[1:])
+        return {'label': label1['label'] + ' deviation', 'units': units}
+    def generate_data(self):
+        datasets = self.amanager.get_datasets()
+        data1 = datasets[self.source1]
+        data2 = datasets[self.source2]
+        return [d1 - d2 for d1, d2 in zip(data1, data2)]
+AHandlers["deviation"] = GenDeviation
+
+
+######################################################################
+# Analyzer management and data generation
+######################################################################
+
+# Return a description of available analyzers
+def list_datasets():
+    datasets = []
+    for ah in sorted(AHandlers.keys()):
+        datasets += AHandlers[ah].DataSets
+    return datasets
+
+# Manage raw and generated data samples
+class AnalyzerManager:
+    error = None
+    def __init__(self, lmanager, segment_time):
+        self.lmanager = lmanager
+        self.error = lmanager.error
+        self.segment_time = segment_time
+        self.raw_datasets = collections.OrderedDict()
+        self.gen_datasets = collections.OrderedDict()
+        self.datasets = {}
+        self.dataset_times = []
+        self.duration = 5.
+    def set_duration(self, duration):
+        self.duration = duration
+    def get_segment_time(self):
+        return self.segment_time
+    def get_datasets(self):
+        return self.datasets
+    def get_dataset_times(self):
+        return self.dataset_times
+    def get_initial_status(self):
+        return self.lmanager.get_initial_status()
+    def setup_dataset(self, name):
+        name = name.strip()
+        if name in self.raw_datasets:
+            return self.raw_datasets[name]
+        if name in self.gen_datasets:
+            return self.gen_datasets[name]
+        name_parts = readlog.name_split(name)
+        if name_parts[0] in self.lmanager.available_dataset_types():
+            hdl = self.lmanager.setup_dataset(name)
+            self.raw_datasets[name] = hdl
+        else:
+            cls = AHandlers.get(name_parts[0])
+            if cls is None:
+                raise self.error("Unknown dataset '%s'" % (name,))
+            num_param = len(name_parts) - 1
+            if num_param < cls.ParametersMin or num_param > cls.ParametersMax:
+                raise self.error("Invalid parameters to dataset '%s'" % (name,))
+            hdl = cls(self, name_parts)
+            self.gen_datasets[name] = hdl
+        self.datasets[name] = []
+        return hdl
+    def get_label(self, dataset):
+        hdl = self.raw_datasets.get(dataset)
+        if hdl is None:
+            hdl = self.gen_datasets.get(dataset)
+            if hdl is None:
+                raise self.error("Unknown dataset '%s'" % (dataset,))
+        return hdl.get_label()
+    def generate_datasets(self):
+        # Generate raw data
+        list_hdls = [(self.datasets[name], hdl)
+                     for name, hdl in self.raw_datasets.items()]
+        initial_start_time = self.lmanager.get_initial_start_time()
+        start_time = t = self.lmanager.get_start_time()
+        end_time = start_time + self.duration
+        while t < end_time:
+            t += self.segment_time
+            self.dataset_times.append(t - initial_start_time)
+            for dl, hdl in list_hdls:
+                dl.append(hdl.pull_data(t))
+        # Generate analyzer data
+        for name, hdl in self.gen_datasets.items():
+            self.datasets[name] = hdl.generate_data()

scripts/motan/data_logger.py

@@ -0,0 +1,204 @@
+#!/usr/bin/env python
+# Tool to subscribe to motion data and log it to a disk file
+#
+# Copyright (C) 2020-2021  Kevin O'Connor <kevin@koconnor.net>
+#
+# This file may be distributed under the terms of the GNU GPLv3 license.
+import sys, os, optparse, socket, select, json, errno, time, zlib
+
+INDEX_UPDATE_TIME = 5.0
+ClientInfo = {'program': 'motan_data_logger', 'version': 'v0.1'}
+
+def webhook_socket_create(uds_filename):
+    sock = socket.socket(socket.AF_UNIX, socket.SOCK_STREAM)
+    sock.setblocking(0)
+    sys.stderr.write("Waiting for connect to %s\n" % (uds_filename,))
+    while 1:
+        try:
+            sock.connect(uds_filename)
+        except socket.error as e:
+            if e.errno == errno.ECONNREFUSED:
+                time.sleep(0.1)
+                continue
+            sys.stderr.write("Unable to connect socket %s [%d,%s]\n"
+                             % (uds_filename, e.errno,
+                                errno.errorcode[e.errno]))
+            sys.exit(-1)
+        break
+    sys.stderr.write("Connection.\n")
+    return sock
+
+class LogWriter:
+    def __init__(self, filename):
+        self.file = open(filename, "wb")
+        self.comp = zlib.compressobj(zlib.Z_DEFAULT_COMPRESSION,
+                                     zlib.DEFLATED, 31)
+        self.raw_pos = self.file_pos = 0
+    def add_data(self, data):
+        d = self.comp.compress(data + b"\x03")
+        self.file.write(d)
+        self.file_pos += len(d)
+        self.raw_pos += len(data) + 1
+    def flush(self, flag=zlib.Z_FULL_FLUSH):
+        if not self.raw_pos:
+            return self.file_pos
+        d = self.comp.flush(flag)
+        self.file.write(d)
+        self.file_pos += len(d)
+        return self.file_pos
+    def close(self):
+        self.flush(zlib.Z_FINISH)
+        self.file.close()
+        self.file = None
+        self.comp = None
+
+class DataLogger:
+    def __init__(self, uds_filename, log_prefix):
+        # IO
+        self.webhook_socket = webhook_socket_create(uds_filename)
+        self.poll = select.poll()
+        self.poll.register(self.webhook_socket, select.POLLIN | select.POLLHUP)
+        self.socket_data = b""
+        # Data log
+        self.logger = LogWriter(log_prefix + ".json.gz")
+        self.index = LogWriter(log_prefix + ".index.gz")
+        # Handlers
+        self.query_handlers = {}
+        self.async_handlers = {}
+        # get_status databasing
+        self.db = {}
+        self.next_index_time = 0.
+        # Start login process
+        self.send_query("info", "info", {"client_info": ClientInfo},
+                        self.handle_info)
+    def error(self, msg):
+        sys.stderr.write(msg + "\n")
+    def finish(self, msg):
+        self.error(msg)
+        self.logger.close()
+        self.index.close()
+        sys.exit(0)
+    # Unix Domain Socket IO
+    def send_query(self, msg_id, method, params, cb):
+        self.query_handlers[msg_id] = cb
+        msg = {"id": msg_id, "method": method, "params": params}
+        cm = json.dumps(msg, separators=(',', ':')).encode()
+        self.webhook_socket.send(cm + b"\x03")
+    def process_socket(self):
+        data = self.webhook_socket.recv(4096)
+        if not data:
+            self.finish("Socket closed")
+        parts = data.split(b"\x03")
+        parts[0] = self.socket_data + parts[0]
+        self.socket_data = parts.pop()
+        for part in parts:
+            try:
+                msg = json.loads(part)
+            except:
+                self.error("ERROR: Unable to parse line")
+                continue
+            self.logger.add_data(part)
+            msg_q = msg.get("q")
+            if msg_q is not None:
+                hdl = self.async_handlers.get(msg_q)
+                if hdl is not None:
+                    hdl(msg, part)
+                continue
+            msg_id = msg.get("id")
+            hdl = self.query_handlers.get(msg_id)
+            if hdl is not None:
+                del self.query_handlers[msg_id]
+                hdl(msg, part)
+                if not self.query_handlers:
+                    self.flush_index()
+                continue
+            self.error("ERROR: Message with unknown id")
+    def run(self):
+        try:
+            while 1:
+                res = self.poll.poll(1000.)
+                for fd, event in res:
+                    if fd == self.webhook_socket.fileno():
+                        self.process_socket()
+        except KeyboardInterrupt as e:
+            self.finish("Keyboard Interrupt")
+    # Query response handlers
+    def send_subscribe(self, msg_id, method, params, cb=None, async_cb=None):
+        if cb is None:
+            cb = self.handle_dump
+        if async_cb is not None:
+            self.async_handlers[msg_id] = async_cb
+        params["response_template"] = {"q": msg_id}
+        self.send_query(msg_id, method, params, cb)
+    def handle_info(self, msg, raw_msg):
+        if msg["result"]["state"] != "ready":
+            self.finish("Klipper not in ready state")
+        self.send_query("list", "objects/list", {}, self.handle_list)
+    def handle_list(self, msg, raw_msg):
+        subreq = {o: None for o in msg["result"]["objects"]}
+        self.send_subscribe("status", "objects/subscribe", {"objects": subreq},
+                            self.handle_subscribe, self.handle_async_db)
+    def handle_subscribe(self, msg, raw_msg):
+        result = msg["result"]
+        self.next_index_time = result["eventtime"] + INDEX_UPDATE_TIME
+        self.db["status"] = status = result["status"]
+        # Subscribe to trapq and stepper queue updates
+        motion_report = status.get("motion_report", {})
+        for trapq in motion_report.get("trapq", []):
+            self.send_subscribe("trapq:" + trapq, "motion_report/dump_trapq",
+                                {"name": trapq})
+        for stepper in motion_report.get("steppers", []):
+            self.send_subscribe("stepq:" + stepper,
+                                "motion_report/dump_stepper", {"name": stepper})
+        # Subscribe to additional sensor data
+        config = status["configfile"]["settings"]
+        for cfgname in config.keys():
+            if cfgname == "adxl345" or cfgname.startswith("adxl345 "):
+                aname = cfgname.split()[-1]
+                self.send_subscribe("adxl345:" + aname, "adxl345/dump_adxl345",
+                                    {"sensor": aname})
+            if cfgname.startswith("angle "):
+                aname = cfgname.split()[1]
+                self.send_subscribe("angle:" + aname, "angle/dump_angle",
+                                    {"sensor": aname})
+    def handle_dump(self, msg, raw_msg):
+        msg_id = msg["id"]
+        if "result" not in msg:
+            self.error("Unable to subscribe to '%s': %s"
+                       % (msg_id, msg.get("error", {}).get("message", "")))
+            return
+        self.db.setdefault("subscriptions", {})[msg_id] = msg["result"]
+    def flush_index(self):
+        self.db['file_position'] = self.logger.flush()
+        self.index.add_data(json.dumps(self.db, separators=(',', ':')).encode())
+        self.db = {"status": {}}
+    def handle_async_db(self, msg, raw_msg):
+        params = msg["params"]
+        db_status = self.db['status']
+        for k, v in params.get("status", {}).items():
+            db_status.setdefault(k, {}).update(v)
+        eventtime = params['eventtime']
+        if eventtime >= self.next_index_time:
+            self.next_index_time = eventtime + INDEX_UPDATE_TIME
+            self.flush_index()
+
+def nice():
+    try:
+        # Try to re-nice writing process
+        os.nice(10)
+    except:
+        pass
+
+def main():
+    usage = "%prog [options] <socket filename> <log name>"
+    opts = optparse.OptionParser(usage)
+    options, args = opts.parse_args()
+    if len(args) != 2:
+        opts.error("Incorrect number of arguments")
+
+    nice()
+    dl = DataLogger(args[0], args[1])
+    dl.run()
+
+if __name__ == '__main__':
+    main()

scripts/motan/motan_graph.py

@@ -0,0 +1,149 @@
+#!/usr/bin/env python
+# Script to perform motion analysis and graphing
+#
+# Copyright (C) 2019-2021  Kevin O'Connor <kevin@koconnor.net>
+#
+# This file may be distributed under the terms of the GNU GPLv3 license.
+import sys, optparse, ast
+import matplotlib
+import readlog, analyzers
+try:
+    import urlparse
+except:
+    import urllib.parse as urlparse
+
+
+######################################################################
+# Graphing
+######################################################################
+
+def plot_motion(amanager, graphs, log_prefix):
+    # Generate data
+    for graph in graphs:
+        for dataset, plot_params in graph:
+            amanager.setup_dataset(dataset)
+    amanager.generate_datasets()
+    datasets = amanager.get_datasets()
+    times = amanager.get_dataset_times()
+    # Build plot
+    fontP = matplotlib.font_manager.FontProperties()
+    fontP.set_size('x-small')
+    fig, rows = matplotlib.pyplot.subplots(nrows=len(graphs), sharex=True)
+    if len(graphs) == 1:
+        rows = [rows]
+    rows[0].set_title("Motion Analysis (%s)" % (log_prefix,))
+    for graph, graph_ax in zip(graphs, rows):
+        graph_units = graph_twin_units = twin_ax = None
+        for dataset, plot_params in graph:
+            label = amanager.get_label(dataset)
+            ax = graph_ax
+            if graph_units is None:
+                graph_units = label['units']
+                ax.set_ylabel(graph_units)
+            elif label['units'] != graph_units:
+                if graph_twin_units is None:
+                    ax = twin_ax = graph_ax.twinx()
+                    graph_twin_units = label['units']
+                    ax.set_ylabel(graph_twin_units)
+                elif label['units'] == graph_twin_units:
+                    ax = twin_ax
+                else:
+                    graph_units = "Unknown"
+                    ax.set_ylabel(graph_units)
+            pparams = {'label': label['label'], 'alpha': 0.8}
+            pparams.update(plot_params)
+            ax.plot(times, datasets[dataset], **pparams)
+        if twin_ax is not None:
+            li1, la1 = graph_ax.get_legend_handles_labels()
+            li2, la2 = twin_ax.get_legend_handles_labels()
+            twin_ax.legend(li1 + li2, la1 + la2, loc='best', prop=fontP)
+        else:
+            graph_ax.legend(loc='best', prop=fontP)
+        graph_ax.grid(True)
+    rows[-1].set_xlabel('Time (s)')
+    return fig
+
+
+######################################################################
+# Startup
+######################################################################
+
+def setup_matplotlib(output_to_file):
+    global matplotlib
+    if output_to_file:
+        matplotlib.use('Agg')
+    import matplotlib.pyplot, matplotlib.dates, matplotlib.font_manager
+    import matplotlib.ticker
+
+def parse_graph_description(desc):
+    if '?' not in desc:
+        return (desc, {})
+    dataset, params = desc.split('?', 1)
+    params = {k: v for k, v in urlparse.parse_qsl(params)}
+    for fkey in ['alpha']:
+        if fkey in params:
+            params[fkey] = float(params[fkey])
+    return (dataset, params)
+
+def list_datasets():
+    datasets = readlog.list_datasets() + analyzers.list_datasets()
+    out = ["\nAvailable datasets:\n"]
+    for dataset, desc in datasets:
+        out.append("%-24s: %s\n" % (dataset, desc))
+    out.append("\n")
+    sys.stdout.write("".join(out))
+    sys.exit(0)
+
+def main():
+    # Parse command-line arguments
+    usage = "%prog [options] <logname>"
+    opts = optparse.OptionParser(usage)
+    opts.add_option("-o", "--output", type="string", dest="output",
+                    default=None, help="filename of output graph")
+    opts.add_option("-s", "--skip", type="float", default=0.,
+                    help="Set the start time to graph")
+    opts.add_option("-d", "--duration", type="float", default=5.,
+                    help="Number of seconds to graph")
+    opts.add_option("--segment-time", type="float", default=0.000100,
+                    help="Analysis segment time (default 0.000100 seconds)")
+    opts.add_option("-g", "--graph", help="Graph to generate (python literal)")
+    opts.add_option("-l", "--list-datasets", action="store_true",
+                    help="List available datasets")
+    options, args = opts.parse_args()
+    if options.list_datasets:
+        list_datasets()
+    if len(args) != 1:
+        opts.error("Incorrect number of arguments")
+    log_prefix = args[0]
+
+    # Open data files
+    lmanager = readlog.LogManager(log_prefix)
+    lmanager.setup_index()
+    lmanager.seek_time(options.skip)
+    amanager = analyzers.AnalyzerManager(lmanager, options.segment_time)
+    amanager.set_duration(options.duration)
+
+    # Default graphs to draw
+    graph_descs = [
+        ["trapq(toolhead,velocity)?color=green"],
+        ["trapq(toolhead,accel)?color=green"],
+        ["deviation(stepq(stepper_x),kin(stepper_x))?color=blue"],
+    ]
+    if options.graph is not None:
+        graph_descs = ast.literal_eval(options.graph)
+    graphs = [[parse_graph_description(g) for g in graph_row]
+              for graph_row in graph_descs]
+
+    # Draw graph
+    setup_matplotlib(options.output is not None)
+    fig = plot_motion(amanager, graphs, log_prefix)
+
+    # Show graph
+    if options.output is None:
+        matplotlib.pyplot.show()
+    else:
+        fig.set_size_inches(8, 6)
+        fig.savefig(options.output)
+
+if __name__ == '__main__':
+    main()

scripts/motan/readlog.py

@@ -0,0 +1,629 @@
+# Code for reading data logs produced by data_logger.py
+#
+# Copyright (C) 2021  Kevin O'Connor <kevin@koconnor.net>
+#
+# This file may be distributed under the terms of the GNU GPLv3 license.
+import json, zlib
+
+class error(Exception):
+    pass
+
+
+######################################################################
+# Log data handlers
+######################################################################
+
+# Log data handlers: {name: class, ...}
+LogHandlers = {}
+
+# Extract status fields from log
+class HandleStatusField:
+    SubscriptionIdParts = 0
+    ParametersMin = ParametersMax = 1
+    DataSets = [
+        ('status(<field>)', 'A get_status field name (separate by periods)'),
+    ]
+    def __init__(self, lmanager, name, name_parts):
+        self.status_tracker = lmanager.get_status_tracker()
+        self.field_name = name_parts[1]
+        self.field_parts = name_parts[1].split('.')
+        self.next_update_time = 0.
+        self.result = None
+    def get_label(self):
+        label = '%s field' % (self.field_name,)
+        return {'label': label, 'units': 'Unknown'}
+    def pull_data(self, req_time):
+        if req_time < self.next_update_time:
+            return self.result
+        db, next_update_time = self.status_tracker.pull_status(req_time)
+        for fp in self.field_parts[:-1]:
+            db = db.get(fp, {})
+        self.result = db.get(self.field_parts[-1], 0.)
+        self.next_update_time = next_update_time
+        return self.result
+LogHandlers["status"] = HandleStatusField
+
+# Extract requested position, velocity, and accel from a trapq log
+class HandleTrapQ:
+    SubscriptionIdParts = 2
+    ParametersMin = ParametersMax = 2
+    DataSets = [
+        ('trapq(<name>,velocity)', 'Requested velocity for the given trapq'),
+        ('trapq(<name>,accel)', 'Requested acceleration for the given trapq'),
+        ('trapq(<name>,<axis>)', 'Requested axis (x, y, or z) position'),
+        ('trapq(<name>,<axis>_velocity)', 'Requested axis velocity'),
+        ('trapq(<name>,<axis>_accel)', 'Requested axis acceleration'),
+    ]
+    def __init__(self, lmanager, name, name_parts):
+        self.name = name
+        self.jdispatch = lmanager.get_jdispatch()
+        self.cur_data = [(0., 0., 0., 0., (0., 0., 0.), (0., 0., 0.))]
+        self.data_pos = 0
+        tq, trapq_name, datasel = name_parts
+        ptypes = {}
+        ptypes['velocity'] = {
+            'label': '%s velocity' % (trapq_name,),
+            'units': 'Velocity\n(mm/s)', 'func': self._pull_velocity
+        }
+        ptypes['accel'] = {
+            'label': '%s acceleration' % (trapq_name,),
+            'units': 'Acceleration\n(mm/s^2)', 'func': self._pull_accel
+        }
+        for axis, name in enumerate("xyz"):
+            ptypes['%s' % (name,)] = {
+                'label': '%s %s position' % (trapq_name, name), 'axis': axis,
+                'units': 'Position\n(mm)', 'func': self._pull_axis_position
+            }
+            ptypes['%s_velocity' % (name,)] = {
+                'label': '%s %s velocity' % (trapq_name, name), 'axis': axis,
+                'units': 'Velocity\n(mm/s)', 'func': self._pull_axis_velocity
+            }
+            ptypes['%s_accel' % (name,)] = {
+                'label': '%s %s acceleration' % (trapq_name, name),
+                'axis': axis, 'units': 'Acceleration\n(mm/s^2)',
+                'func': self._pull_axis_accel
+            }
+        pinfo = ptypes.get(datasel)
+        if pinfo is None:
+            raise error("Unknown trapq data selection '%s'" % (datasel,))
+        self.label = {'label': pinfo['label'], 'units': pinfo['units']}
+        self.axis = pinfo.get('axis')
+        self.pull_data = pinfo['func']
+    def get_label(self):
+        return self.label
+    def _find_move(self, req_time):
+        data_pos = self.data_pos
+        while 1:
+            move = self.cur_data[data_pos]
+            print_time, move_t, start_v, accel, start_pos, axes_r = move
+            if req_time <= print_time + move_t:
+                return move, req_time >= print_time
+            data_pos += 1
+            if data_pos < len(self.cur_data):
+                self.data_pos = data_pos
+                continue
+            jmsg = self.jdispatch.pull_msg(req_time, self.name)
+            if jmsg is None:
+                return move, False
+            self.cur_data = jmsg['data']
+            self.data_pos = data_pos = 0
+    def _pull_axis_position(self, req_time):
+        move, in_range = self._find_move(req_time)
+        print_time, move_t, start_v, accel, start_pos, axes_r = move
+        mtime = max(0., min(move_t, req_time - print_time))
+        dist = (start_v + .5 * accel * mtime) * mtime;
+        return start_pos[self.axis] + axes_r[self.axis] * dist
+    def _pull_axis_velocity(self, req_time):
+        move, in_range = self._find_move(req_time)
+        if not in_range:
+            return 0.
+        print_time, move_t, start_v, accel, start_pos, axes_r = move
+        return (start_v + accel * (req_time - print_time)) * axes_r[self.axis]
+    def _pull_axis_accel(self, req_time):
+        move, in_range = self._find_move(req_time)
+        if not in_range:
+            return 0.
+        print_time, move_t, start_v, accel, start_pos, axes_r = move
+        return accel * axes_r[self.axis]
+    def _pull_velocity(self, req_time):
+        move, in_range = self._find_move(req_time)
+        if not in_range:
+            return 0.
+        print_time, move_t, start_v, accel, start_pos, axes_r = move
+        return start_v + accel * (req_time - print_time)
+    def _pull_accel(self, req_time):
+        move, in_range = self._find_move(req_time)
+        if not in_range:
+            return 0.
+        print_time, move_t, start_v, accel, start_pos, axes_r = move
+        return accel
+LogHandlers["trapq"] = HandleTrapQ
+
+# Extract positions from queue_step log
+class HandleStepQ:
+    SubscriptionIdParts = 2
+    ParametersMin = 1
+    ParametersMax = 2
+    DataSets = [
+        ('stepq(<stepper>)', 'Commanded position of the given stepper'),
+        ('stepq(<stepper>,<time>)', 'Commanded position with smooth time'),
+    ]
+    def __init__(self, lmanager, name, name_parts):
+        self.name = name
+        self.stepper_name = name_parts[1]
+        self.jdispatch = lmanager.get_jdispatch()
+        self.step_data = [(0., 0., 0.), (0., 0., 0.)] # [(time, half_pos, pos)]
+        self.data_pos = 0
+        self.smooth_time = 0.010
+        if len(name_parts) == 3:
+            try:
+                self.smooth_time = float(name_parts[2])
+            except ValueError:
+                raise error("Invalid stepq smooth time '%s'" % (name_parts[2],))
+    def get_label(self):
+        label = '%s position' % (self.stepper_name,)
+        return {'label': label, 'units': 'Position\n(mm)'}
+    def pull_data(self, req_time):
+        smooth_time = self.smooth_time
+        while 1:
+            data_pos = self.data_pos
+            step_data = self.step_data
+            # Find steps before and after req_time
+            next_time, next_halfpos, next_pos = step_data[data_pos + 1]
+            if req_time >= next_time:
+                if data_pos + 2 < len(step_data):
+                    self.data_pos = data_pos + 1
+                    continue
+                self._pull_block(req_time)
+                continue
+            last_time, last_halfpos, last_pos = step_data[data_pos]
+            # Perform step smoothing
+            rtdiff = req_time - last_time
+            stime = next_time - last_time
+            if stime <= smooth_time:
+                pdiff = next_halfpos - last_halfpos
+                return last_halfpos + rtdiff * pdiff / stime
+            stime = .5 * smooth_time
+            if rtdiff < stime:
+                pdiff = last_pos - last_halfpos
+                return last_halfpos + rtdiff * pdiff / stime
+            rtdiff = next_time - req_time
+            if rtdiff < stime:
+                pdiff = last_pos - next_halfpos
+                return next_halfpos + rtdiff * pdiff / stime
+            return last_pos
+    def _pull_block(self, req_time):
+        step_data = self.step_data
+        del step_data[:-1]
+        self.data_pos = 0
+        # Read data block containing requested time frame
+        while 1:
+            jmsg = self.jdispatch.pull_msg(req_time, self.name)
+            if jmsg is None:
+                last_time, last_halfpos, last_pos = step_data[0]
+                self.step_data.append((req_time + .1, last_pos, last_pos))
+                return
+            last_time = jmsg['last_step_time']
+            if req_time <= last_time:
+                break
+        # Process block into (time, half_position, position) 3-tuples
+        first_time = step_time = jmsg['first_step_time']
+        first_clock = jmsg['first_clock']
+        step_clock = first_clock - jmsg['data'][0][0]
+        cdiff = jmsg['last_clock'] - first_clock
+        tdiff = last_time - first_time
+        inv_freq = 0.
+        if cdiff:
+            inv_freq = tdiff / cdiff
+        step_dist = jmsg['step_distance']
+        step_pos = jmsg['start_position']
+        for interval, raw_count, add in jmsg['data']:
+            qs_dist = step_dist
+            count = raw_count
+            if count < 0:
+                qs_dist = -qs_dist
+                count = -count
+            for i in range(count):
+                step_clock += interval
+                interval += add
+                step_time = first_time + (step_clock - first_clock) * inv_freq
+                step_halfpos = step_pos + .5 * qs_dist
+                step_pos += qs_dist
+                step_data.append((step_time, step_halfpos, step_pos))
+LogHandlers["stepq"] = HandleStepQ
+
+# Extract stepper motor phase position
+class HandleStepPhase:
+    SubscriptionIdParts = 0
+    ParametersMin = 1
+    ParametersMax = 2
+    DataSets = [
+        ('step_phase(<driver>)', 'Stepper motor phase of the given stepper'),
+        ('step_phase(<driver>,microstep)', 'Microstep position for stepper'),
+    ]
+    def __init__(self, lmanager, name, name_parts):
+        self.name = name
+        self.driver_name = name_parts[1]
+        self.stepper_name = " ".join(self.driver_name.split()[1:])
+        config = lmanager.get_initial_status()['configfile']['settings']
+        if self.driver_name not in config or self.stepper_name not in config:
+            raise error("Unable to find stepper driver '%s' config"
+                        % (self.driver_name,))
+        if len(name_parts) == 3 and name_parts[2] != "microstep":
+            raise error("Unknown step_phase selection '%s'" % (name_parts[2],))
+        self.report_microsteps = len(name_parts) == 3
+        sconfig = config[self.stepper_name]
+        self.phases = sconfig["microsteps"]
+        if not self.report_microsteps:
+            self.phases *= 4
+        self.jdispatch = lmanager.get_jdispatch()
+        self.jdispatch.add_handler(name, "stepq:" + self.stepper_name)
+        # stepq tracking
+        self.step_data = [(0., 0), (0., 0)] # [(time, mcu_pos)]
+        self.data_pos = 0
+        # driver phase tracking
+        self.status_tracker = lmanager.get_status_tracker()
+        self.next_status_time = 0.
+        self.mcu_phase_offset = 0
+    def get_label(self):
+        if self.report_microsteps:
+            return {'label': '%s microstep' % (self.stepper_name,),
+                    'units': 'Microstep'}
+        return {'label': '%s phase' % (self.stepper_name,), 'units': 'Phase'}
+    def _pull_phase_offset(self, req_time):
+        db, self.next_status_time = self.status_tracker.pull_status(req_time)
+        mcu_phase_offset = db.get(self.driver_name, {}).get('mcu_phase_offset')
+        if mcu_phase_offset is None:
+            mcu_phase_offset = 0
+        self.mcu_phase_offset = mcu_phase_offset
+    def pull_data(self, req_time):
+        if req_time >= self.next_status_time:
+            self._pull_phase_offset(req_time)
+        while 1:
+            data_pos = self.data_pos
+            step_data = self.step_data
+            # Find steps before and after req_time
+            next_time, next_pos = step_data[data_pos + 1]
+            if req_time >= next_time:
+                if data_pos + 2 < len(step_data):
+                    self.data_pos = data_pos + 1
+                    continue
+                self._pull_block(req_time)
+                continue
+            step_pos = step_data[data_pos][1]
+            return (step_pos - self.mcu_phase_offset) % self.phases
+    def _pull_block(self, req_time):
+        step_data = self.step_data
+        del step_data[:-1]
+        self.data_pos = 0
+        # Read data block containing requested time frame
+        while 1:
+            jmsg = self.jdispatch.pull_msg(req_time, self.name)
+            if jmsg is None:
+                last_time, last_pos = step_data[0]
+                self.step_data.append((req_time + .1, last_pos))
+                return
+            last_time = jmsg['last_step_time']
+            if req_time <= last_time:
+                break
+        # Process block into (time, position) 2-tuples
+        first_time = step_time = jmsg['first_step_time']
+        first_clock = jmsg['first_clock']
+        step_clock = first_clock - jmsg['data'][0][0]
+        cdiff = jmsg['last_clock'] - first_clock
+        tdiff = last_time - first_time
+        inv_freq = 0.
+        if cdiff:
+            inv_freq = tdiff / cdiff
+        step_pos = jmsg['start_mcu_position']
+        for interval, raw_count, add in jmsg['data']:
+            qs_dist = 1
+            count = raw_count
+            if count < 0:
+                qs_dist = -1
+                count = -count
+            for i in range(count):
+                step_clock += interval
+                interval += add
+                step_time = first_time + (step_clock - first_clock) * inv_freq
+                step_pos += qs_dist
+                step_data.append((step_time, step_pos))
+LogHandlers["step_phase"] = HandleStepPhase
+
+# Extract accelerometer data
+class HandleADXL345:
+    SubscriptionIdParts = 2
+    ParametersMin = ParametersMax = 2
+    DataSets = [
+        ('adxl345(<name>,<axis>)', 'Accelerometer for given axis (x, y, or z)'),
+    ]
+    def __init__(self, lmanager, name, name_parts):
+        self.name = name
+        self.adxl_name = name_parts[1]
+        self.jdispatch = lmanager.get_jdispatch()
+        self.next_accel_time = self.last_accel_time = 0.
+        self.next_accel = self.last_accel = (0., 0., 0.)
+        self.cur_data = []
+        self.data_pos = 0
+        if name_parts[2] not in 'xyz':
+            raise error("Unknown adxl345 data selection '%s'" % (name,))
+        self.axis = 'xyz'.index(name_parts[2])
+    def get_label(self):
+        label = '%s %s acceleration' % (self.adxl_name, 'xyz'[self.axis])
+        return {'label': label, 'units': 'Acceleration\n(mm/s^2)'}
+    def pull_data(self, req_time):
+        axis = self.axis
+        while 1:
+            if req_time <= self.next_accel_time:
+                adiff = self.next_accel[axis] - self.last_accel[axis]
+                tdiff = self.next_accel_time - self.last_accel_time
+                rtdiff = req_time - self.last_accel_time
+                return self.last_accel[axis] + rtdiff * adiff / tdiff
+            if self.data_pos >= len(self.cur_data):
+                # Read next data block
+                jmsg = self.jdispatch.pull_msg(req_time, self.name)
+                if jmsg is None:
+                    return 0.
+                self.cur_data = jmsg['data']
+                self.data_pos = 0
+                continue
+            self.last_accel = self.next_accel
+            self.last_accel_time = self.next_accel_time
+            self.next_accel_time, x, y, z = self.cur_data[self.data_pos]
+            self.next_accel = (x, y, z)
+            self.data_pos += 1
+LogHandlers["adxl345"] = HandleADXL345
+
+# Extract positions from magnetic angle sensor
+class HandleAngle:
+    SubscriptionIdParts = 2
+    ParametersMin = ParametersMax = 1
+    DataSets = [
+        ('angle(<name>)', 'Angle sensor position'),
+    ]
+    def __init__(self, lmanager, name, name_parts):
+        self.name = name
+        self.angle_name = name_parts[1]
+        self.jdispatch = lmanager.get_jdispatch()
+        self.next_angle_time = self.last_angle_time = 0.
+        self.next_angle = self.last_angle = 0.
+        self.cur_data = []
+        self.data_pos = 0
+        self.position_offset = 0.
+        self.angle_dist = 1.
+        # Determine angle distance from associated stepper's rotation_distance
+        config = lmanager.get_initial_status()['configfile']['settings']
+        aname = 'angle %s' % (self.angle_name,)
+        stepper_name = config.get(aname, {}).get('stepper')
+        if stepper_name is not None:
+            sconfig = config.get(stepper_name, {})
+            rotation_distance = sconfig.get('rotation_distance', 1.)
+            gear_ratio = sconfig.get('gear_ratio', ())
+            if type(gear_ratio) == str: # XXX
+                gear_ratio = [[float(v.strip()) for v in gr.split(':')]
+                              for gr in gear_ratio.split(',')]
+            for n, d in gear_ratio:
+                rotation_distance *= d / n
+            self.angle_dist = rotation_distance / 65536.
+    def get_label(self):
+        label = '%s position' % (self.angle_name,)
+        return {'label': label, 'units': 'Position\n(mm)'}
+    def pull_data(self, req_time):
+        while 1:
+            if req_time <= self.next_angle_time:
+                pdiff = self.next_angle - self.last_angle
+                tdiff = self.next_angle_time - self.last_angle_time
+                rtdiff = req_time - self.last_angle_time
+                po = rtdiff * pdiff / tdiff
+                return ((self.last_angle + po) * self.angle_dist
+                        + self.position_offset)
+            if self.data_pos >= len(self.cur_data):
+                # Read next data block
+                jmsg = self.jdispatch.pull_msg(req_time, self.name)
+                if jmsg is None:
+                    return (self.next_angle * self.angle_dist
+                            + self.position_offset)
+                self.cur_data = jmsg['data']
+                position_offset = jmsg.get('position_offset')
+                if position_offset is not None:
+                    self.position_offset = position_offset
+                self.data_pos = 0
+                continue
+            self.last_angle = self.next_angle
+            self.last_angle_time = self.next_angle_time
+            self.next_angle_time, self.next_angle = self.cur_data[self.data_pos]
+            self.data_pos += 1
+LogHandlers["angle"] = HandleAngle
+
+
+######################################################################
+# Log reading
+######################################################################
+
+# Read, uncompress, and parse messages in a log built by data_logger.py
+class JsonLogReader:
+    def __init__(self, filename):
+        self.file = open(filename, "rb")
+        self.comp = zlib.decompressobj(31)
+        self.msgs = [b""]
+    def seek(self, pos):
+        self.file.seek(pos)
+        self.comp = zlib.decompressobj(-15)
+    def pull_msg(self):
+        msgs = self.msgs
+        while 1:
+            if len(msgs) > 1:
+                msg = msgs.pop(0)
+                try:
+                    json_msg = json.loads(msg)
+                except:
+                    logging.exception("Unable to parse line")
+                    continue
+                return json_msg
+            raw_data = self.file.read(8192)
+            if not raw_data:
+                return None
+            data = self.comp.decompress(raw_data)
+            parts = data.split(b'\x03')
+            parts[0] = msgs[0] + parts[0]
+            self.msgs = msgs = parts
+
+# Store messages in per-subscription queues until handlers are ready for them
+class JsonDispatcher:
+    def __init__(self, log_prefix):
+        self.names = {}
+        self.queues = {}
+        self.last_read_time = 0.
+        self.log_reader = JsonLogReader(log_prefix + ".json.gz")
+        self.is_eof = False
+    def check_end_of_data(self):
+        return self.is_eof and not any(self.queues.values())
+    def add_handler(self, name, subscription_id):
+        self.names[name] = q = []
+        self.queues.setdefault(subscription_id, []).append(q)
+    def pull_msg(self, req_time, name):
+        q = self.names[name]
+        while 1:
+            if q:
+                return q.pop(0)
+            if req_time + 1. < self.last_read_time:
+                return None
+            json_msg = self.log_reader.pull_msg()
+            if json_msg is None:
+                self.is_eof = True
+                return None
+            qid = json_msg.get('q')
+            if qid == 'status':
+                pt = json_msg.get('toolhead', {}).get('estimated_print_time')
+                if pt is not None:
+                    self.last_read_time = pt
+            for mq in self.queues.get(qid, []):
+                mq.append(json_msg['params'])
+
+
+######################################################################
+# Dataset and log tracking
+######################################################################
+
+# Tracking of get_status messages
+class TrackStatus:
+    def __init__(self, lmanager, name, start_status):
+        self.name = name
+        self.jdispatch = lmanager.get_jdispatch()
+        self.next_status_time = 0.
+        self.status = dict(start_status)
+        self.next_update = {}
+    def pull_status(self, req_time):
+        status = self.status
+        while 1:
+            if req_time < self.next_status_time:
+                return status, self.next_status_time
+            for k, v in self.next_update.items():
+                status.setdefault(k, {}).update(v)
+            jmsg = self.jdispatch.pull_msg(req_time, self.name)
+            if jmsg is None:
+                self.next_status_time = req_time + 0.100
+                self.next_update = {}
+                return status, self.next_status_time
+            self.next_update = jmsg['status']
+            th = self.next_update.get('toolhead', {})
+            self.next_status_time = th.get('estimated_print_time', 0.)
+
+# Split a string by commas while keeping parenthesis intact
+def param_split(line):
+    out = []
+    level = prev = 0
+    for i, c in enumerate(line):
+        if not level and c == ',':
+            out.append(line[prev:i])
+            prev = i+1
+        elif c == '(':
+            level += 1
+        elif level and c== ')':
+            level -= 1
+    out.append(line[prev:])
+    return out
+
+# Split a dataset name (eg, "abc(def,ghi)") into parts
+def name_split(name):
+    if '(' not in name or not name.endswith(')'):
+        raise error("Malformed dataset name '%s'" % (name,))
+    aname, aparams = name.split('(', 1)
+    return [aname] + param_split(aparams[:-1])
+
+# Return a description of possible datasets
+def list_datasets():
+    datasets = []
+    for lh in sorted(LogHandlers.keys()):
+        datasets += LogHandlers[lh].DataSets
+    return datasets
+
+# Main log access management
+class LogManager:
+    error = error
+    def __init__(self, log_prefix):
+        self.index_reader = JsonLogReader(log_prefix + ".index.gz")
+        self.jdispatch = JsonDispatcher(log_prefix)
+        self.initial_start_time = self.start_time = 0.
+        self.datasets = {}
+        self.initial_status = {}
+        self.start_status = {}
+        self.log_subscriptions = {}
+        self.status_tracker = None
+    def setup_index(self):
+        fmsg = self.index_reader.pull_msg()
+        self.initial_status = status = fmsg['status']
+        self.start_status = dict(status)
+        start_time = status['toolhead']['estimated_print_time']
+        self.initial_start_time = self.start_time = start_time
+        self.log_subscriptions = fmsg.get('subscriptions', {})
+    def get_initial_status(self):
+        return self.initial_status
+    def available_dataset_types(self):
+        return {name: None for name in LogHandlers}
+    def get_jdispatch(self):
+        return self.jdispatch
+    def seek_time(self, req_time):
+        self.start_time = req_start_time = self.initial_start_time + req_time
+        start_status = self.start_status
+        seek_time = max(self.initial_start_time, req_start_time - 1.)
+        file_position = 0
+        while 1:
+            fmsg = self.index_reader.pull_msg()
+            if fmsg is None:
+                break
+            th = fmsg['status']['toolhead']
+            ptime = max(th['estimated_print_time'], th.get('print_time', 0.))
+            if ptime > seek_time:
+                break
+            for k, v in fmsg["status"].items():
+                start_status.setdefault(k, {}).update(v)
+            file_position = fmsg['file_position']
+        if file_position:
+            self.jdispatch.log_reader.seek(file_position)
+    def get_initial_start_time(self):
+        return self.initial_start_time
+    def get_start_time(self):
+        return self.start_time
+    def get_status_tracker(self):
+        if self.status_tracker is None:
+            self.status_tracker = TrackStatus(self, "status", self.start_status)
+            self.jdispatch.add_handler("status", "status")
+        return self.status_tracker
+    def setup_dataset(self, name):
+        if name in self.datasets:
+            return self.datasets[name]
+        name_parts = name_split(name)
+        cls = LogHandlers.get(name_parts[0])
+        if cls is None:
+            raise error("Unknown dataset '%s'" % (name_parts[0],))
+        len_pp = len(name_parts) - 1
+        if len_pp < cls.ParametersMin or len_pp > cls.ParametersMax:
+            raise error("Invalid number of parameters for '%s'" % (name,))
+        if cls.SubscriptionIdParts:
+            subscription_id = ":".join(name_parts[:cls.SubscriptionIdParts])
+            if subscription_id not in self.log_subscriptions:
+                raise error("Dataset '%s' not in capture" % (subscription_id,))
+            self.jdispatch.add_handler(name, subscription_id)
+        self.datasets[name] = hdl = cls(self, name, name_parts)
+        return hdl

test/configs/at90usb1286.config

@@ -0,0 +1,4 @@
+# Base config file for atmega at90usb1286
+CONFIG_MACH_AVR=y
+CONFIG_MACH_at90usb1286=y
+CONFIG_CLOCK_FREQ=16000000

test/configs/atmega1280.config

@@ -0,0 +1,4 @@
+# Base config file for atmega1280
+CONFIG_MACH_AVR=y
+CONFIG_MACH_atmega1280=y
+CONFIG_CLOCK_FREQ=16000000

test/configs/atmega1284p.config

@@ -0,0 +1,4 @@
+# Base config file for atmega1284p
+CONFIG_MACH_AVR=y
+CONFIG_MACH_atmega1284p=y
+CONFIG_CLOCK_FREQ=16000000

test/configs/atmega2560.config

@@ -0,0 +1,4 @@
+# Base config file for atmega2560
+CONFIG_MACH_AVR=y
+CONFIG_MACH_atmega2560=y
+CONFIG_CLOCK_FREQ=16000000

test/configs/atmega328.config

@@ -0,0 +1,4 @@
+# Base config file for atmega328
+CONFIG_MACH_AVR=y
+CONFIG_MACH_atmega328=y
+CONFIG_CLOCK_FREQ=16000000

test/configs/atmega644p.config

@@ -0,0 +1,4 @@
+# Base config file for atmega644p
+CONFIG_MACH_AVR=y
+CONFIG_MACH_atmega644p=y
+CONFIG_CLOCK_FREQ=16000000

test/configs/hostsimulator.config

@@ -0,0 +1,2 @@
+# Base config file for host simulator
+CONFIG_MACH_SIMU=y

test/configs/linuxprocess.config

@@ -0,0 +1,2 @@
+# Base config file for linux process
+CONFIG_MACH_LINUX=y

test/configs/lpc176x.config

@@ -0,0 +1,2 @@
+# Base config file for LPC176x boards
+CONFIG_MACH_LPC176X=y

test/configs/pru.config

@@ -0,0 +1,2 @@
+# Base config file for the Beaglebone PRU
+CONFIG_MACH_PRU=y

test/configs/rp2040.config

@@ -0,0 +1,2 @@
+# Base config file for rp2040 boards
+CONFIG_MACH_RP2040=y

test/configs/sam3x8c.config

@@ -0,0 +1,3 @@
+# Base config file for Atmel SAM3x8e ARM processor
+CONFIG_MACH_ATSAM=y
+CONFIG_MACH_SAM3X8C=y

test/configs/sam3x8e.config

@@ -0,0 +1,3 @@
+# Base config file for Atmel SAM3x8e ARM processor
+CONFIG_MACH_ATSAM=y
+CONFIG_MACH_SAM3X8E=y

test/configs/sam4e8e.config

@@ -0,0 +1,3 @@
+# Base config file for Atmel SAM4E8E ARM processor
+CONFIG_MACH_ATSAM=y
+CONFIG_MACH_SAM4E8E=y

test/configs/sam4s8c.config

@@ -0,0 +1,3 @@
+# Base config file for Atmel SAM4S8C ARM processor
+CONFIG_MACH_ATSAM=y
+CONFIG_MACH_SAM4S8C=y

test/configs/samd21g18.config

@@ -0,0 +1,3 @@
+# Base config file for SAMD21 boards
+CONFIG_MACH_ATSAMD=y
+CONFIG_MACH_SAMD21G18=y

test/configs/samd51p20.config

@@ -0,0 +1,4 @@
+# Base config file for Atmel SAMD51P20 ARM processor
+CONFIG_MACH_ATSAMD=y
+CONFIG_MACH_SAMD51P20=y
+CONFIG_CLOCK_REF_X25M=y

test/configs/same70q20b.config

@@ -0,0 +1,3 @@
+# Base config file for Atmel SAME70Q20B ARM processor
+CONFIG_MACH_ATSAM=y
+CONFIG_MACH_SAME70Q20B=y

test/configs/stm32f031.config

@@ -0,0 +1,3 @@
+# Base config file for STM32F031 boards
+CONFIG_MACH_STM32=y
+CONFIG_MACH_STM32F031=y

test/configs/stm32f070.config

@@ -0,0 +1,3 @@
+# Base config file for STM32F070 ARM processor
+CONFIG_MACH_STM32=y
+CONFIG_MACH_STM32F070=y

test/configs/stm32f103-serial.config

@@ -0,0 +1,4 @@
+# Base config file for STM32F1 ARM processor using serial communication
+CONFIG_MACH_STM32=y
+CONFIG_MACH_STM32F103=y
+CONFIG_STM32_SERIAL_USART1=y

test/configs/stm32f103.config

@@ -0,0 +1,3 @@
+# Base config file for STM32F1 ARM processor
+CONFIG_MACH_STM32=y
+CONFIG_MACH_STM32F103=y

test/configs/stm32f405.config

@@ -0,0 +1,3 @@
+# Base config file for STM32F405 ARM processor
+CONFIG_MACH_STM32=y
+CONFIG_MACH_STM32F405=y

test/configs/stm32f407.config

@@ -0,0 +1,3 @@
+# Base config file for STM32F407 ARM processor
+CONFIG_MACH_STM32=y
+CONFIG_MACH_STM32F407=y

test/configs/stm32f429.config

@@ -0,0 +1,3 @@
+# Base config file for STM32F429 ARM processor
+CONFIG_MACH_STM32=y
+CONFIG_MACH_STM32F429=y

test/configs/stm32f446.config

@@ -0,0 +1,3 @@
+# Base config file for STM32F446 ARM processor
+CONFIG_MACH_STM32=y
+CONFIG_MACH_STM32F446=y

test/configs/stm32g0b1.config

@@ -0,0 +1,3 @@
+# Base config file for STM32G0B1 ARM processor
+CONFIG_MACH_STM32=y
+CONFIG_MACH_STM32G0B1=y

test/configs/stm32h743.config

@@ -0,0 +1,3 @@
+# Base config file for STM32H743 ARM processor
+CONFIG_MACH_STM32=y
+CONFIG_MACH_STM32H743=y

test/klippy/bed_screws.cfg

@@ -0,0 +1,52 @@
+# Test config for bed screws tool
+[stepper_x]
+step_pin: PF0
+dir_pin: PF1
+enable_pin: !PD7
+rotation_distance: 40
+microsteps: 16
+endstop_pin: ^PE5
+position_endstop: 0
+position_max: 200
+homing_speed: 50
+
+[stepper_y]
+step_pin: PF6
+dir_pin: !PF7
+enable_pin: !PF2
+rotation_distance: 40
+microsteps: 16
+endstop_pin: ^PJ1
+position_endstop: 0
+position_max: 200
+homing_speed: 50
+
+[stepper_z]
+step_pin: PL3
+dir_pin: PL1
+enable_pin: !PK0
+rotation_distance: 8
+microsteps: 16
+endstop_pin: ^PD3
+position_endstop: 0.5
+position_max: 200
+
+[bed_screws]
+screw1: 100,50
+screw1_name: Front right
+screw1_fine_adjust: 200,50
+screw2: 75,75
+screw2_fine_adjust: 200,75
+screw3: 75,75
+screw3_name: Last
+screw3_fine_adjust: 75,90
+
+[mcu]
+serial: /dev/ttyACM0
+
+[printer]
+kinematics: cartesian
+max_velocity: 300
+max_accel: 3000
+max_z_velocity: 5
+max_z_accel: 100

test/klippy/bed_screws.test

@@ -0,0 +1,49 @@
+# Test case for bed screws helper tool
+CONFIG bed_screws.cfg
+DICTIONARY atmega2560.dict
+
+# Start helper script and then abort it
+G28
+BED_SCREWS_ADJUST
+
+ACCEPT
+ACCEPT
+ABORT
+
+# Start helper script and run until success
+BED_SCREWS_ADJUST
+
+ACCEPT
+ACCEPT
+ACCEPT
+
+ACCEPT
+ACCEPT
+ACCEPT
+
+# Start helper script and run with two readjusts
+BED_SCREWS_ADJUST
+
+ACCEPT
+ADJUSTED
+ACCEPT
+
+ACCEPT
+ACCEPT
+ACCEPT
+
+ADJUSTED
+ACCEPT
+ACCEPT
+
+ACCEPT
+ACCEPT
+ACCEPT
+
+ACCEPT
+ACCEPT
+ACCEPT
+
+# Start helper script and run with two readjusts
+BED_SCREWS_ADJUST
+ABORT

test/klippy/bltouch.cfg

@@ -0,0 +1,76 @@
+# Test config for bltouch
+[stepper_x]
+step_pin: PF0
+dir_pin: PF1
+enable_pin: !PD7
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^PE5
+position_endstop: 0
+position_max: 200
+homing_speed: 50
+
+[stepper_y]
+step_pin: PF6
+dir_pin: !PF7
+enable_pin: !PF2
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^PJ1
+position_endstop: 0
+position_max: 200
+homing_speed: 50
+
+[stepper_z]
+step_pin: PL3
+dir_pin: PL1
+enable_pin: !PK0
+microsteps: 16
+rotation_distance: 8
+endstop_pin: probe:z_virtual_endstop
+position_max: 200
+
+[extruder]
+step_pin: PA4
+dir_pin: PA6
+enable_pin: !PA2
+microsteps: 16
+rotation_distance: 33.5
+nozzle_diameter: 0.400
+filament_diameter: 1.750
+heater_pin: PB4
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: PK5
+control: pid
+pid_Kp: 22.2
+pid_Ki: 1.08
+pid_Kd: 114
+min_temp: 0
+max_temp: 250
+
+[heater_bed]
+heater_pin: PH5
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: PK6
+control: watermark
+min_temp: 0
+max_temp: 130
+
+[bltouch]
+sensor_pin: PC7
+control_pin: PC5
+z_offset: 1.15
+
+[bed_mesh]
+mesh_min: 10,10
+mesh_max: 180,180
+
+[mcu]
+serial: /dev/ttyACM0
+
+[printer]
+kinematics: cartesian
+max_velocity: 300
+max_accel: 3000
+max_z_velocity: 5
+max_z_accel: 100

test/klippy/bltouch.test

@@ -0,0 +1,29 @@
+# Test case for bltouch support
+CONFIG bltouch.cfg
+DICTIONARY atmega2560.dict
+
+# Start by homing the printer.
+G28
+G1 F6000
+
+# Z / X / Y moves
+G1 Z1
+G1 X1
+G1 Y1
+
+# Run BLTOUCH_DEBUG
+BLTOUCH_DEBUG
+BLTOUCH_DEBUG COMMAND=reset
+
+# Run bed_mesh_calibrate
+BED_MESH_CALIBRATE
+
+# Move again
+G1 Z5 X0 Y0
+
+# Do regular probe
+PROBE
+QUERY_PROBE
+
+# Move again
+G1 Z9

test/klippy/commands.test

@@ -0,0 +1,46 @@
+# Tests for miscellaneous g-code commands
+DICTIONARY atmega2560.dict
+CONFIG ../../config/example-cartesian.cfg
+
+# Simple status commands
+GET_POSITION
+M114
+
+STATUS
+
+HELP
+
+QUERY_ENDSTOPS
+
+M115
+
+M18
+
+# G-code state commands
+G28
+SAVE_GCODE_STATE
+G92 Z-5
+G92 E5
+SAVE_GCODE_STATE NAME=test
+G1 Z-5
+G91
+G1 Z0
+RESTORE_GCODE_STATE NAME=test
+G1 Z-5
+RESTORE_GCODE_STATE
+G1 Z0 E0
+RESTORE_GCODE_STATE MOVE=1
+
+# Update commands
+SET_GCODE_OFFSET Z=.1
+M206 Z-.2
+SET_GCODE_OFFSET Z_ADJUST=-.1
+
+SET_VELOCITY_LIMIT ACCEL=100 VELOCITY=20 SQUARE_CORNER_VELOCITY=1 ACCEL_TO_DECEL=200
+M204 S500
+
+SET_PRESSURE_ADVANCE EXTRUDER=extruder ADVANCE=.001
+SET_PRESSURE_ADVANCE ADVANCE=.002 ADVANCE_LOOKAHEAD_TIME=.001
+
+# Restart command (must be last in test)
+RESTART

test/klippy/delta.test

@@ -0,0 +1,47 @@
+# Test case for basic movement on delta printers
+CONFIG ../../config/example-delta.cfg
+DICTIONARY atmega2560.dict
+
+# Start by homing the printer.  Also tests Z moves.
+G28
+
+# Perform an XY+Z move with infintesimal XY component
+G1 x0 y0 z15
+
+# Perform an XY move along Y axis (aligned with rear tower)
+G1 x0 y5 z15
+
+# Perform an XY+Z move along Y axis
+G1 x0 y-5 z10
+
+# Perform a Z move
+G1 x0 y-5 z15
+
+# Perform an XY move across all three towers
+G1 x2 y2 z10
+
+# Perform an XY+Z move with tiny Z movement
+G1 x2 y-10 z10.1
+
+# Move to far away position
+G1 x140 y0
+
+# Move to extreme position
+G1 x145 y0
+
+# Move to another extreme position
+G1 x145 y5
+
+# Test delta_calibrate command
+DELTA_CALIBRATE
+
+# Dummy move
+G1 Z5 X0 Y0
+
+# Verify stepper_buzz
+STEPPER_BUZZ STEPPER=stepper_a
+STEPPER_BUZZ STEPPER=stepper_b
+STEPPER_BUZZ STEPPER=stepper_c
+
+# Dummy move
+G1 Z3 X2 Y3

test/klippy/delta_calibrate.cfg

@@ -0,0 +1,76 @@
+# Test config for the DELTA_CALIBRATE command (on linear delta robots)
+[stepper_a]
+step_pin: PF0
+dir_pin: PF1
+enable_pin: !PD7
+microsteps: 16
+rotation_distance: 0.32
+endstop_pin: ^PE4
+homing_speed: 50
+#position_endstop: 297.05
+#arm_length: 333.0
+
+[stepper_b]
+step_pin: PF6
+dir_pin: PF7
+enable_pin: !PF2
+microsteps: 16
+rotation_distance: 0.32
+endstop_pin: ^PJ0
+
+[stepper_c]
+step_pin: PL3
+dir_pin: PL1
+enable_pin: !PK0
+microsteps: 16
+rotation_distance: 0.32
+endstop_pin: ^PD2
+
+[mcu]
+serial: /dev/ttyACM0
+
+[printer]
+kinematics: delta
+max_velocity: 300
+max_accel: 3000
+#delta_radius: 174.75
+
+[delta_calibrate]
+radius: 50
+
+#*# <---------------------- SAVE_CONFIG ---------------------->
+#*# DO NOT EDIT THIS BLOCK OR BELOW. The contents are auto-generated.
+#*#
+#*# [printer]
+#*# delta_radius = 174.750004
+#*#
+#*# [stepper_a]
+#*# angle = 210.000032
+#*# arm_length = 333.000032
+#*# position_endstop = 297.049970
+#*#
+#*# [stepper_b]
+#*# angle = 329.999997
+#*# arm_length = 332.999811
+#*# position_endstop = 297.050132
+#*#
+#*# [stepper_c]
+#*# angle = 90.000000
+#*# arm_length = 333.000181
+#*# position_endstop = 297.049900
+#*#
+#*# [delta_calibrate]
+#*# height0 = 0.0
+#*# height0_pos = 2970499.999,2970499.999,2970499.999
+#*# height1 = 0.0
+#*# height1_pos = 3163266.999,3163266.999,2727853.999
+#*# height2 = 0.0
+#*# height2_pos = 2869315.999,3303154.999,2869315.999
+#*# height3 = 0.0
+#*# height3_pos = 2749008.999,3138330.999,3138330.999
+#*# height4 = 0.0
+#*# height4_pos = 2885497.999,2885497.999,3218746.999
+#*# height5 = 0.0
+#*# height5_pos = 3114555.999,2771134.999,3114555.999
+#*# height6 = 0.0
+#*# height6_pos = 3260109.999,2876968.999,2876968.999

test/klippy/delta_calibrate.test

@@ -0,0 +1,31 @@
+# Test case for basic movement on delta printers
+CONFIG delta_calibrate.cfg
+DICTIONARY atmega2560.dict
+
+# Start by homing the printer.
+G28
+
+# Run basic delta calibration (in manual mode)
+DELTA_CALIBRATE METHOD=manual
+G1 Z0.1
+ACCEPT
+G1 Z0.1
+ACCEPT
+G1 Z0.1
+ACCEPT
+G1 Z0.1
+ACCEPT
+G1 Z0.1
+ACCEPT
+G1 Z0.1
+ACCEPT
+G1 Z0.1
+ACCEPT
+
+# Run extended delta calibration
+DELTA_ANALYZE CENTER_DISTS=74,74,74,74,74,74
+DELTA_ANALYZE OUTER_DISTS=74,74,74,74,74,74
+DELTA_ANALYZE CENTER_PILLAR_WIDTHS=9,9,9
+DELTA_ANALYZE OUTER_PILLAR_WIDTHS=9,9,9,9,9,9
+DELTA_ANALYZE SCALE=1
+DELTA_ANALYZE CALIBRATE=extended

test/klippy/dual_carriage.cfg

@@ -0,0 +1,125 @@
+# Test config with dual carriage and multiple extruders
+[stepper_x]
+step_pin: PF0
+dir_pin: PF1
+enable_pin: !PD7
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^PE5
+position_endstop: 0
+position_max: 200
+homing_speed: 50
+
+[dual_carriage]
+axis: x
+step_pin: PH1
+dir_pin: PH0
+enable_pin: !PA1
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^PE4
+position_endstop: 200
+position_max: 200
+homing_speed: 50
+
+[stepper_y]
+step_pin: PF6
+dir_pin: !PF7
+enable_pin: !PF2
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^PJ1
+position_endstop: 0
+position_max: 200
+homing_speed: 50
+
+[stepper_z]
+step_pin: PL3
+dir_pin: PL1
+enable_pin: !PK0
+microsteps: 16
+rotation_distance: 8
+endstop_pin: ^PD3
+position_endstop: 0.5
+position_max: 200
+
+[extruder]
+step_pin: PA4
+dir_pin: PA6
+enable_pin: !PA2
+microsteps: 16
+rotation_distance: 33.5
+nozzle_diameter: 0.400
+filament_diameter: 1.750
+heater_pin: PB4
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: PK5
+control: pid
+pid_Kp: 22.2
+pid_Ki: 1.08
+pid_Kd: 114
+min_temp: 0
+max_temp: 250
+
+[gcode_macro PARK_extruder0]
+gcode:
+    G90
+    G1 X0
+
+[gcode_macro T0]
+gcode:
+    PARK_{printer.toolhead.extruder}
+    ACTIVATE_EXTRUDER EXTRUDER=extruder
+    SET_DUAL_CARRIAGE CARRIAGE=0
+
+[extruder1]
+step_pin: PC1
+dir_pin: PC3
+enable_pin: !PC7
+microsteps: 16
+rotation_distance: 33.5
+nozzle_diameter: 0.400
+filament_diameter: 1.750
+heater_pin: PB5
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: PK7
+control: pid
+pid_Kp: 22.2
+pid_Ki: 1.08
+pid_Kd: 114
+min_temp: 0
+max_temp: 250
+
+[gcode_macro PARK_extruder1]
+gcode:
+    SET_SERVO SERVO=my_servo angle=100
+    G90
+    G1 X200
+
+[gcode_macro T1]
+gcode:
+    PARK_{printer.toolhead.extruder}
+    SET_SERVO SERVO=my_servo angle=50
+    ACTIVATE_EXTRUDER EXTRUDER=extruder1
+    SET_DUAL_CARRIAGE CARRIAGE=1
+
+[servo my_servo]
+pin: PH4
+
+[heater_bed]
+heater_pin: PH5
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: PK6
+control: watermark
+min_temp: 0
+max_temp: 130
+
+[mcu]
+serial: /dev/ttyACM0
+
+[printer]
+kinematics: cartesian
+max_velocity: 300
+max_accel: 3000
+max_z_velocity: 5
+max_z_accel: 100

test/klippy/dual_carriage.test

@@ -0,0 +1,39 @@
+# Test cases on printers with dual carriage and multiple extruders
+CONFIG dual_carriage.cfg
+DICTIONARY atmega2560.dict
+
+# First home the printer
+G90
+G28
+
+# Perform a dummy move
+G1 X10 F6000
+
+# Activate alternate carriage
+SET_DUAL_CARRIAGE CARRIAGE=1
+G1 X190 F6000
+
+# Go back to main carriage
+SET_DUAL_CARRIAGE CARRIAGE=0
+G1 X20 F6000
+
+# Test changing extruders
+G1 X5
+T1
+G91
+G1 X-10 E.2
+T0
+G91
+G1 X20 E.2
+G90
+
+QUERY_ENDSTOPS
+
+# Servo tests
+SET_SERVO servo=my_servo angle=160
+SET_SERVO servo=my_servo angle=130
+
+# Verify STEPPER_BUZZ
+STEPPER_BUZZ STEPPER=dual_carriage
+STEPPER_BUZZ STEPPER=extruder
+STEPPER_BUZZ STEPPER=extruder1

test/klippy/exclude_object.cfg

@@ -0,0 +1,117 @@
+[stepper_x]
+step_pin: PF0
+dir_pin: PF1
+enable_pin: !PD7
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^PE5
+position_endstop: 0
+position_max: 200
+homing_speed: 50
+
+[stepper_y]
+step_pin: PF6
+dir_pin: !PF7
+enable_pin: !PF2
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^PJ1
+position_endstop: 0
+position_max: 200
+homing_speed: 50
+
+[stepper_z]
+step_pin: PL3
+dir_pin: PL1
+enable_pin: !PK0
+microsteps: 16
+rotation_distance: 8
+endstop_pin: ^PD3
+position_endstop: 0.5
+position_max: 200
+
+[extruder]
+step_pin: PA4
+dir_pin: PA6
+enable_pin: !PA2
+microsteps: 16
+rotation_distance: 33.5
+nozzle_diameter: 0.500
+filament_diameter: 3.500
+heater_pin: PB4
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: PK5
+control: pid
+pid_Kp: 22.2
+pid_Ki: 1.08
+pid_Kd: 114
+min_temp: 0
+max_temp: 210
+
+[heater_bed]
+heater_pin: PH5
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: PK6
+control: watermark
+min_temp: 0
+max_temp: 110
+
+[mcu]
+serial: /dev/ttyACM0
+
+[printer]
+kinematics: cartesian
+max_velocity: 300
+max_accel: 3000
+max_z_velocity: 5
+max_z_accel: 100
+
+# Test config for exclude_object
+[exclude_object]
+
+[gcode_macro M486]
+gcode:
+  # Parameters known to M486 are as follows:
+  #   [C<flag>] Cancel the current object
+  #   [P<index>] Cancel the object with the given index
+  #   [S<index>] Set the index of the current object.
+  #       If the object with the given index has been canceled, this will cause
+  #       the firmware to skip to the next object. The value -1 is used to
+  #       indicate something that isn’t an object and shouldn’t be skipped.
+  #   [T<count>] Reset the state and set the number of objects
+  #   [U<index>] Un-cancel the object with the given index. This command will be
+  #       ignored if the object has already been skipped
+
+  {% if 'exclude_object' not in printer %}
+    {action_raise_error("[exclude_object] is not enabled")}
+  {% endif %}
+
+  {% if 'T' in params %}
+    EXCLUDE_OBJECT RESET=1
+
+    {% for i in range(params.T | int) %}
+      EXCLUDE_OBJECT_DEFINE NAME={i}
+    {% endfor %}
+  {% endif %}
+
+  {% if 'C' in params %}
+    EXCLUDE_OBJECT CURRENT=1
+  {% endif %}
+
+  {% if 'P' in params %}
+    EXCLUDE_OBJECT NAME={params.P}
+  {% endif %}
+
+  {% if 'S' in params %}
+    {% if params.S == '-1' %}
+      {% if printer.exclude_object.current_object %}
+        EXCLUDE_OBJECT_END NAME={printer.exclude_object.current_object}
+      {% endif %}
+    {% else %}
+      EXCLUDE_OBJECT_START NAME={params.S}
+    {% endif %}
+  {% endif %}
+
+  {% if 'U' in params %}
+    EXCLUDE_OBJECT RESET=1 NAME={params.U}
+  {% endif %}

test/klippy/exclude_object.test

@@ -0,0 +1,126 @@
+DICTIONARY atmega2560.dict
+CONFIG exclude_object.cfg
+
+
+G28
+M83
+
+M486 T3
+
+M486 S0
+  G0 X10
+
+M486 S-1
+  G0 X0
+
+M486 S1
+  G0 X11
+M486 C
+
+# "Prime" the transform
+G1 X140 E0.5
+G1 X160 E0.5
+G1 X140 E0.5
+G1 X160 E0.5
+G1 X140 E0.5
+G1 X160 E0.5
+G1 X140 E0.5
+
+M486 S-1
+  G0 X0
+
+M486 S2
+  G0 X13
+
+M486 S0
+  G0 X10
+
+M486 S-1
+  G0 X0
+
+M486 S1
+  G0 X-11
+
+M486 S-1
+  G0 X0
+
+M486 S2
+  G0 X13
+
+M486 P2
+EXCLUDE_OBJECT
+
+M486 S0
+  G0 X10
+
+M486 S-1
+  G0 X0
+
+M486 S1
+  G0 X-11
+
+M486 S-1
+  G0 X0
+
+M486 S2
+  G0 X-13
+
+M486 U2
+EXCLUDE_OBJECT
+
+M486 S0
+  G0 X10
+
+M486 S-1
+  G0 X0
+
+M486 S1
+  G0 X-11
+
+M486 S-1
+  G0 X0
+
+M486 S2
+  G0 X13
+
+M486 P0
+M486 P1
+M486 P2
+EXCLUDE_OBJECT
+
+M486 S0
+  G0 X-10
+
+M486 S-1
+  G0 X0
+
+M486 S1
+  G0 X-11
+
+M486 S-1
+  G0 X0
+
+M486 S2
+  G0 X-13
+
+
+M486 S66
+  G0 X66
+
+M486 S-1
+  G0 X0
+  M486 P66
+
+M486 S66
+  G0 X-66
+
+M486 T3
+
+M486 S0
+  G0 X10
+
+M486 S1
+  G0 X11
+
+M486 S2
+  G0 X13

test/klippy/extruders.cfg

@@ -0,0 +1,68 @@
+# Config for extruder testing
+[stepper_x]
+step_pin: PF0
+dir_pin: PF1
+enable_pin: !PD7
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^PE5
+position_endstop: 0
+position_max: 200
+homing_speed: 50
+
+[stepper_y]
+step_pin: PF6
+dir_pin: !PF7
+enable_pin: !PF2
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^PJ1
+position_endstop: 0
+position_max: 200
+homing_speed: 50
+
+[stepper_z]
+step_pin: PL3
+dir_pin: PL1
+enable_pin: !PK0
+microsteps: 16
+rotation_distance: 8
+endstop_pin: ^PD3
+position_endstop: 0.5
+position_max: 200
+
+[extruder]
+step_pin: PA4
+dir_pin: PA6
+enable_pin: !PA2
+microsteps: 16
+rotation_distance: 33.5
+nozzle_diameter: 0.500
+filament_diameter: 3.500
+heater_pin: PB4
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: PK5
+control: pid
+pid_Kp: 22.2
+pid_Ki: 1.08
+pid_Kd: 114
+min_temp: 0
+max_temp: 210
+
+[extruder_stepper my_extra_stepper]
+extruder: extruder
+step_pin: PH5
+dir_pin: PH6
+enable_pin: !PB5
+microsteps: 16
+rotation_distance: 28.2
+
+[mcu]
+serial: /dev/ttyACM0
+
+[printer]
+kinematics: cartesian
+max_velocity: 300
+max_accel: 3000
+max_z_velocity: 5
+max_z_accel: 100

test/klippy/extruders.test

@@ -0,0 +1,50 @@
+# Extruder tests
+DICTIONARY atmega2560.dict
+CONFIG extruders.cfg
+
+# Extrude only
+G1 E5
+G1 E-2
+G1 E7
+
+# Home and extrusion moves
+G28
+G1 X20 Y20 Z1
+G1 X25 Y25 E7.5
+
+# Update step_distance
+SET_EXTRUDER_ROTATION_DISTANCE EXTRUDER=extruder DISTANCE=33.2
+G1 X30 Y30 E8.0
+
+# Reverse step_distance
+SET_EXTRUDER_ROTATION_DISTANCE EXTRUDER=extruder DISTANCE=-33.1
+G1 X30 Y30 E8.2
+
+# Disable extruder stepper motor
+SYNC_EXTRUDER_MOTION EXTRUDER=extruder MOTION_QUEUE=
+G1 X35 Y35 E8.5
+
+# Disable my_extra_stepper stepper motor
+SYNC_EXTRUDER_MOTION EXTRUDER=my_extra_stepper MOTION_QUEUE=
+G1 X40 Y40 E9.0
+
+# Enable extruder stepper motor
+SYNC_EXTRUDER_MOTION EXTRUDER=extruder MOTION_QUEUE=extruder
+G1 X45 Y45 E9.5
+
+# Switch to just my_extra_stepper stepper motor
+SYNC_EXTRUDER_MOTION EXTRUDER=extruder MOTION_QUEUE=
+SYNC_EXTRUDER_MOTION EXTRUDER=my_extra_stepper MOTION_QUEUE=extruder
+G1 X50 Y50 E10.0
+
+# Test pressure advance move
+SET_PRESSURE_ADVANCE EXTRUDER=my_extra_stepper ADVANCE=0.020
+G1 X55 Y55 E0
+G1 X55 Y55 E0.5
+G1 X60 Y60 E1.1
+G1 X50 Y50
+SET_PRESSURE_ADVANCE EXTRUDER=extruder ADVANCE=0.025
+G1 X55 Y55 E1.5
+G1 X50 Y50
+G1 X55 Y55 E2.0
+G1 X50 Y50

test/klippy/gcode_arcs.cfg

@@ -0,0 +1,70 @@
+# Test config for arcs
+[gcode_arcs]
+
+[stepper_x]
+step_pin: PF0
+dir_pin: PF1
+enable_pin: !PD7
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^PE5
+position_endstop: 0
+position_max: 200
+homing_speed: 50
+
+[stepper_y]
+step_pin: PF6
+dir_pin: !PF7
+enable_pin: !PF2
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^PJ1
+position_endstop: 0
+position_max: 200
+homing_speed: 50
+
+[stepper_z]
+step_pin: PL3
+dir_pin: PL1
+enable_pin: !PK0
+microsteps: 16
+rotation_distance: 8
+endstop_pin: ^PD3
+position_endstop: 0.5
+position_max: 200
+
+[extruder]
+step_pin: PA4
+dir_pin: PA6
+enable_pin: !PA2
+microsteps: 16
+rotation_distance: 33.5
+nozzle_diameter: 0.500
+filament_diameter: 3.500
+heater_pin: PB4
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: PK5
+control: pid
+pid_Kp: 22.2
+pid_Ki: 1.08
+pid_Kd: 114
+min_temp: 0
+max_temp: 210
+
+[heater_bed]
+heater_pin: PH5
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: PK6
+control: watermark
+min_temp: 0
+max_temp: 110
+
+[mcu]
+serial: /dev/ttyACM0
+
+[printer]
+kinematics: cartesian
+max_velocity: 300
+max_accel: 3000
+max_z_velocity: 5
+max_z_accel: 100

test/klippy/gcode_arcs.test

@@ -0,0 +1,11 @@
+# Tests for g-code G2/G3 arc commands
+DICTIONARY atmega2560.dict
+CONFIG gcode_arcs.cfg
+
+# Home and move in arcs
+G28
+G1 X20 Y20 Z20
+G2 X125 Y32 Z20 E1 I10.5 J10.5
+
+# XY+Z arc move
+G2 X20 Y20 Z10 E1 I10.5 J10.5

test/klippy/input_shaper.cfg

@@ -0,0 +1,85 @@
+# Test config for input_shaper
+[stepper_x]
+step_pin: PF0
+dir_pin: PF1
+enable_pin: !PD7
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^PE5
+position_endstop: 0
+position_max: 200
+homing_speed: 50
+
+[stepper_y]
+step_pin: PF6
+dir_pin: !PF7
+enable_pin: !PF2
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^PJ1
+position_endstop: 0
+position_max: 200
+homing_speed: 50
+
+[stepper_z]
+step_pin: PL3
+dir_pin: PL1
+enable_pin: !PK0
+microsteps: 16
+rotation_distance: 8
+endstop_pin: ^PD3
+position_endstop: 0.5
+position_max: 200
+
+[extruder]
+step_pin: PA4
+dir_pin: PA6
+enable_pin: !PA2
+microsteps: 16
+rotation_distance: 33.5
+nozzle_diameter: 0.500
+filament_diameter: 3.500
+heater_pin: PB4
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: PK5
+control: pid
+pid_Kp: 22.2
+pid_Ki: 1.08
+pid_Kd: 114
+min_temp: 0
+max_temp: 210
+
+[heater_bed]
+heater_pin: PH5
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: PK6
+control: watermark
+min_temp: 0
+max_temp: 110
+
+[mcu]
+serial: /dev/ttyACM0
+
+[printer]
+kinematics: cartesian
+max_velocity: 300
+max_accel: 3000
+max_z_velocity: 5
+max_z_accel: 100
+
+[input_shaper]
+shaper_type_x: mzv
+shaper_freq_x: 33.2
+shaper_type_x: ei
+shaper_freq_x: 39.3
+
+[adxl345]
+cs_pin: PK7
+axes_map: -x,-y,z
+
+[mpu9250 my_mpu]
+
+[resonance_tester]
+probe_points: 20,20,20
+accel_chip_x: adxl345
+accel_chip_y: mpu9250 my_mpu

test/klippy/input_shaper.test

@@ -0,0 +1,7 @@
+# Test case for input_stepper
+CONFIG input_shaper.cfg
+DICTIONARY atmega2560.dict
+
+# Simple command test
+SET_INPUT_SHAPER SHAPER_FREQ_X=22.2 DAMPING_RATIO_X=.1 SHAPER_TYPE_X=zv
+SET_INPUT_SHAPER SHAPER_FREQ_Y=33.3 DAMPING_RATIO_X=.11 SHAPER_TYPE_X=2hump_ei

test/klippy/led.cfg

@@ -0,0 +1,44 @@
+# Test case for LED config sections
+
+[led lled]
+red_pin: PA2
+initial_RED: 0.2
+
+[neopixel nled]
+pin: PA3
+chain_count: 4
+initial_RED: 0.2
+initial_GREEN: 0.3
+initial_BLUE: 0.4
+
+[dotstar dled]
+data_pin: PA4
+clock_pin: PA5
+chain_count: 2
+initial_RED: 0.2
+initial_GREEN: 0.3
+initial_BLUE: 0.4
+
+[pca9533 p5led]
+initial_RED: 0.1
+initial_GREEN: 0.2
+initial_BLUE: 0.3
+
+[pca9632 p6led]
+scl_pin: PB1
+sda_pin: PB2
+initial_RED: 0.4
+initial_GREEN: 0.5
+initial_BLUE: 0.6
+
+[display_template dtest]
+param_myvar: 1.2
+text: { param_myvar }, { param_myvar / 2.0 }, 0.0, 2.0
+
+[mcu]
+serial: /dev/ttyACM0
+
+[printer]
+kinematics: none
+max_velocity: 300
+max_accel: 3000

test/klippy/led.test

@@ -0,0 +1,58 @@
+# Test case for LEDs
+CONFIG led.cfg
+DICTIONARY atmega2560.dict
+
+# SET_LED tests
+SET_LED LED=lled RED=0.2
+SET_LED LED=lled RED=0.3 TRANSMIT=0
+SET_LED LED=lled RED=0.4
+SET_LED LED=lled RED=0.5 SYNC=0
+
+SET_LED LED=nled RED=0.2
+SET_LED LED=nled RED=0.3 TRANSMIT=0
+SET_LED LED=nled RED=0.4
+SET_LED LED=nled RED=0.5 SYNC=0
+
+SET_LED LED=dled RED=0.2
+SET_LED LED=dled RED=0.3 TRANSMIT=0
+SET_LED LED=dled RED=0.4
+SET_LED LED=dled RED=0.5 SYNC=0
+
+SET_LED LED=p5led RED=0.2
+SET_LED LED=p5led RED=0.3 TRANSMIT=0
+SET_LED LED=p5led RED=0.4
+SET_LED LED=p5led RED=0.5 SYNC=0
+
+SET_LED LED=p6led RED=0.2
+SET_LED LED=p6led RED=0.3 TRANSMIT=0
+SET_LED LED=p6led RED=0.4
+SET_LED LED=p6led RED=0.5 SYNC=0
+
+# SET_LED chain tests
+SET_LED LED=nled INDEX=2 RED=0.2
+SET_LED LED=nled INDEX=1 RED=0.3 TRANSMIT=0
+SET_LED LED=nled INDEX=2 RED=0.4
+SET_LED LED=nled INDEX=1 RED=0.5 SYNC=0
+
+SET_LED LED=dled INDEX=2 RED=0.2
+SET_LED LED=dled INDEX=1 RED=0.3 TRANSMIT=0
+SET_LED LED=dled INDEX=2 RED=0.4
+SET_LED LED=dled INDEX=1 RED=0.5 SYNC=0
+
+# SET_LED_TEMPLATE tests
+SET_LED_TEMPLATE LED=lled TEMPLATE=dtest
+SET_LED_TEMPLATE LED=lled TEMPLATE=
+
+SET_LED_TEMPLATE LED=nled TEMPLATE=dtest
+SET_LED_TEMPLATE LED=nled TEMPLATE=
+SET_LED_TEMPLATE LED=nled INDEX=2 TEMPLATE=dtest
+SET_LED_TEMPLATE LED=nled TEMPLATE=
+
+SET_LED_TEMPLATE LED=dled TEMPLATE=dtest
+SET_LED_TEMPLATE LED=dled TEMPLATE=
+SET_LED_TEMPLATE LED=dled INDEX=2 TEMPLATE=dtest
+SET_LED_TEMPLATE LED=dled TEMPLATE=
+
+SET_LED_TEMPLATE LED=p5led TEMPLATE=dtest
+
+SET_LED_TEMPLATE LED=p6led TEMPLATE=dtest

test/klippy/linuxtest.cfg

@@ -0,0 +1,15 @@
+# Test config for linux process specific hardware
+[mcu]
+serial: /tmp/klipper_host_mcu
+
+[printer]
+kinematics: none
+max_velocity: 300
+max_accel: 3000
+
+[temperature_sensor my_ds18b20]
+min_temp: 0
+max_temp: 100
+serial_no: 12345678
+sensor_mcu: mcu
+sensor_type: DS18B20

test/klippy/linuxtest.test

@@ -0,0 +1,5 @@
+# Tests for various temperature sensors
+DICTIONARY linuxprocess.dict
+CONFIG linuxtest.cfg
+
+G4 P1000

test/klippy/macros.cfg

@@ -0,0 +1,132 @@
+# Test config with macros
+[stepper_x]
+step_pin: PF0
+dir_pin: PF1
+enable_pin: !PD7
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^PE5
+position_endstop: 0
+position_max: 200
+homing_speed: 50
+
+[stepper_y]
+step_pin: PF6
+dir_pin: !PF7
+enable_pin: !PF2
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^PJ1
+position_endstop: 0
+position_max: 200
+homing_speed: 50
+
+[stepper_z]
+step_pin: PL3
+dir_pin: PL1
+enable_pin: !PK0
+microsteps: 16
+rotation_distance: 8
+endstop_pin: ^PD3
+position_endstop: 0.5
+position_max: 200
+
+[extruder]
+step_pin: PA4
+dir_pin: PA6
+enable_pin: !PA2
+microsteps: 16
+rotation_distance: 33.5
+nozzle_diameter: 0.500
+filament_diameter: 3.500
+heater_pin: PB4
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: PK5
+control: pid
+pid_Kp: 22.2
+pid_Ki: 1.08
+pid_Kd: 114
+min_temp: 0
+max_temp: 210
+
+[heater_bed]
+heater_pin: PH5
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: PK6
+control: watermark
+min_temp: 0
+max_temp: 110
+
+[mcu]
+serial: /dev/ttyACM0
+
+[printer]
+kinematics: cartesian
+max_velocity: 300
+max_accel: 3000
+max_z_velocity: 5
+max_z_accel: 100
+
+[gcode_macro TEST_SAVE_RESTORE]
+gcode:
+  SAVE_GCODE_STATE NAME=TESTIT1
+  G92 Z10
+  RESTORE_GCODE_STATE NAME=TESTIT1
+  G92 Z0
+
+[gcode_macro TEST_expression]
+gcode:
+  {% if printer.gcode_move.gcode_position.x != 0.0 %}
+    M112
+  {% else %}
+    { action_respond_info("TEST_expression") }
+  {% endif %}
+
+[gcode_macro TEST_variable]
+variable_t: 12.0
+gcode:
+  { action_respond_info("TEST_variable") }
+  {% if t - 12.0 != printer.toolhead.position.y %}
+    M112
+  {% endif %}
+  {% if printer["gcode_macro TEST_variable"].t - 12.0 != 0.0 %}
+    M112
+  {% endif %}
+  SET_GCODE_VARIABLE MACRO=TEST_variable VARIABLE=t VALUE=17
+  TEST_variable_part2
+
+[gcode_macro TEST_variable_part2]
+gcode:
+  { action_respond_info("TEST_variable_part2") }
+  {% if printer["gcode_macro TEST_variable"].t != 17.0 %}
+    M112
+  {% endif %}
+
+[gcode_macro TEST_param]
+gcode:
+  { action_respond_info("TEST_param") }
+  {% if params.T != "123" %}
+    M112
+  {% endif %}
+
+[gcode_macro TEST_in]
+gcode:
+  {% if "abc" in printer or "toolhead" not in printer %}
+    M112
+  {% endif %}
+
+# A utf8 test (with utf8 characters such as ° )
+[gcode_macro TEST_unicode]  ; Also test end-of-line comments ( ° )
+variable_ABC: 25            # Another end-of-line comment test ( ° )
+description: A unicode test °
+gcode: G28
+
+# Main test start point
+[gcode_macro TESTIT]
+gcode:
+  TEST_SAVE_RESTORE
+  TEST_expression
+  TEST_variable
+  TEST_param T=123
+  TEST_unicode
+  TEST_in

test/klippy/macros.test

@@ -0,0 +1,6 @@
+# Tests for miscellaneous g-code commands
+DICTIONARY atmega2560.dict
+CONFIG macros.cfg
+
+# Run TESTIT macro
+TESTIT

test/klippy/manual_stepper.cfg

@@ -0,0 +1,25 @@
+# Test config for manual_stepper
+[manual_stepper basic_stepper]
+step_pin: PF0
+dir_pin: PF1
+enable_pin: !PD7
+microsteps: 16
+rotation_distance: 40
+velocity: 7
+accel: 500
+
+[manual_stepper homing_stepper]
+step_pin: PF6
+dir_pin: !PF7
+enable_pin: !PF2
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^PJ1
+
+[mcu]
+serial: /dev/ttyACM0
+
+[printer]
+kinematics: none
+max_velocity: 300
+max_accel: 3000

test/klippy/manual_stepper.test

@@ -0,0 +1,24 @@
+# Test case for manual_stepper
+CONFIG manual_stepper.cfg
+DICTIONARY atmega2560.dict
+
+# Test basic moves
+MANUAL_STEPPER STEPPER=basic_stepper ENABLE=1
+MANUAL_STEPPER STEPPER=basic_stepper SET_POSITION=0
+MANUAL_STEPPER STEPPER=basic_stepper MOVE=10 SPEED=10
+MANUAL_STEPPER STEPPER=basic_stepper MOVE=5
+MANUAL_STEPPER STEPPER=basic_stepper MOVE=12 SPEED=12 ACCEL=9000.2
+MANUAL_STEPPER STEPPER=basic_stepper ENABLE=0
+
+# Test homing move
+MANUAL_STEPPER STEPPER=homing_stepper ENABLE=1
+MANUAL_STEPPER STEPPER=homing_stepper SET_POSITION=0
+MANUAL_STEPPER STEPPER=homing_stepper MOVE=10 SPEED=100 ACCEL=1
+MANUAL_STEPPER STEPPER=homing_stepper ENABLE=0
+
+# Test motor off
+M84
+
+# Verify stepper_buzz
+STEPPER_BUZZ STEPPER="manual_stepper basic_stepper"
+STEPPER_BUZZ STEPPER="manual_stepper homing_stepper"

test/klippy/move.gcode

@@ -0,0 +1,46 @@
+; Simple movement tests
+
+; Start by homing the printer.
+G28
+G90
+G1 F6000
+
+; Z / X / Y moves
+G1 Z1
+G1 X1
+G1 Y1
+
+; Delayed moves
+G1 Y2
+G4 P100
+G1 Y1.5
+M400
+G1 Y1
+
+; diagonal moves
+G1 X0 Y0
+G1 X1 Z2
+G1 X0 Y1 Z1
+
+; extrude only moves
+G1 E1
+G1 E0
+
+; Verify GET_POSITION works
+GET_POSITION
+
+; regular extrude move
+G1 X0 Y0 E.01
+
+; fan speeds
+M106 S50
+M106
+M106 S90
+M106 S0
+M107
+
+; coordinate manipulation
+G92 Y-3
+G1 Y-2
+G91
+G1 Y-1

test/klippy/multi_z.cfg

@@ -0,0 +1,105 @@
+# Test config with multiple z steppers
+[stepper_x]
+step_pin: PF0
+dir_pin: PF1
+enable_pin: !PD7
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^PE5
+position_endstop: 0
+position_max: 200
+homing_speed: 50
+
+[stepper_y]
+step_pin: PF6
+dir_pin: !PF7
+enable_pin: !PF2
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^PJ1
+position_endstop: 0
+position_max: 200
+homing_speed: 50
+
+[stepper_z]
+step_pin: PL3
+dir_pin: PL1
+enable_pin: !PK0
+microsteps: 16
+rotation_distance: 8
+endstop_pin: ^PD3
+position_endstop: 0.5
+position_max: 200
+
+[stepper_z1]
+step_pin: PC1
+dir_pin: PC3
+enable_pin: !PC7
+microsteps: 16
+rotation_distance: 8
+endstop_pin: ^PD2
+
+[stepper_z2]
+step_pin: PH1
+dir_pin: PH0
+enable_pin: !PA1
+microsteps: 16
+rotation_distance: 8
+
+[z_tilt]
+z_positions:
+    -56,-17
+    -56,322
+    311,322
+points:
+    50,50
+    50,195
+    195,195
+    195,50
+
+[bed_tilt]
+points:
+    50,50
+    50,195
+    195,195
+    195,50
+
+[extruder]
+step_pin: PA4
+dir_pin: PA6
+enable_pin: !PA2
+microsteps: 16
+rotation_distance: 33.5
+nozzle_diameter: 0.400
+filament_diameter: 1.750
+heater_pin: PB4
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: PK5
+control: pid
+pid_Kp: 22.2
+pid_Ki: 1.08
+pid_Kd: 114
+min_temp: 0
+max_temp: 250
+
+[heater_bed]
+heater_pin: PH5
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: PK6
+control: watermark
+min_temp: 0
+max_temp: 130
+
+[probe]
+pin: PH6
+z_offset: 1.15
+
+[mcu]
+serial: /dev/ttyACM0
+
+[printer]
+kinematics: cartesian
+max_velocity: 300
+max_accel: 3000
+max_z_velocity: 5
+max_z_accel: 100

test/klippy/multi_z.test

@@ -0,0 +1,60 @@
+# Test case with multiple z stepper motors
+CONFIG multi_z.cfg
+DICTIONARY atmega2560.dict
+
+# Start by homing the printer.
+G28
+G1 F6000
+
+# Z / X / Y moves
+G1 Z1
+G1 X1
+G1 Y1
+
+# Run bed_tilt_calibrate
+BED_TILT_CALIBRATE
+
+# Move again
+G1 Z5 X0 Y0
+
+# Run Z_TILT_ADJUST
+Z_TILT_ADJUST
+
+# Move again
+G1 Z2 X2 Y3
+
+# Do regular probe
+PROBE
+QUERY_PROBE
+
+# Test manual probe commands
+PROBE_CALIBRATE
+ABORT
+PROBE_CALIBRATE SPEED=7.3
+TESTZ Z=-.2
+TESTZ Z=-.3
+TESTZ Z=+.1
+TESTZ Z=++
+TESTZ Z=--
+TESTZ Z=+
+TESTZ Z=-
+ACCEPT
+Z_ENDSTOP_CALIBRATE
+TESTZ Z=-.1
+TESTZ Z=+.2
+ACCEPT
+MANUAL_PROBE
+TESTZ Z=--
+ABORT
+
+# Do regular probe
+PROBE
+QUERY_PROBE
+
+# Verify stepper_buzz
+STEPPER_BUZZ STEPPER=stepper_z
+STEPPER_BUZZ STEPPER=stepper_z1
+STEPPER_BUZZ STEPPER=stepper_z2
+
+# Move again
+G1 Z9

test/klippy/out_of_bounds.test

@@ -0,0 +1,8 @@
+# Test that basic bounds checks work
+CONFIG ../../config/example-cartesian.cfg
+DICTIONARY atmega2560.dict
+SHOULD_FAIL
+
+# Home the printer, and then attempt to move to an obviously bad location
+G28
+G1 Y9999

test/klippy/polar.test

@@ -0,0 +1,74 @@
+# Test case for basic movement on polar printers
+CONFIG ../../config/example-polar.cfg
+DICTIONARY atmega2560.dict
+
+; Start by homing the printer.
+G28
+G90
+G1 F6000
+
+; Z / X / Y moves
+G1 Z1
+G1 X1
+G1 Y1
+
+; Delayed moves
+G1 Y2
+G4 P100
+G1 Y1.5
+M400
+G1 Y1
+
+; diagonal moves
+G1 X10 Y0
+G1 X1 Z2
+G1 X0 Y1 Z1
+
+; extrude only moves
+G1 E1
+G1 E0
+
+; regular extrude move
+G1 X10 Y0 E.01
+
+; Multiple rotations
+g1 X10 Y10
+g1 X-10 Y10
+g1 X-10 Y-10
+g1 X10 Y-10
+
+g1 X10 Y15
+g1 X-10 Y15
+g1 X-10 Y-15
+g1 X10 Y-15
+
+g1 X10 Y20
+g1 X-10 Y20
+g1 X-10 Y-20
+g1 X10 Y-20
+
+g1 X10 Y25
+g1 X-10 Y25
+g1 X-10 Y-25
+g1 X10 Y-25
+
+; Multiple rotations in reverse direction
+g1 X-15 Y-25
+g1 X-15 Y25
+g1 X15 Y25
+g1 X15 Y-25
+
+g1 X-20 Y-25
+g1 X-20 Y25
+g1 X20 Y25
+g1 X20 Y-25
+
+g1 X-25 Y-25
+g1 X-25 Y25
+g1 X25 Y25
+g1 X25 Y-25
+
+g1 X-30 Y-25
+g1 X-30 Y25
+g1 X30 Y25
+g1 X30 Y-25

test/klippy/printers.test

@@ -0,0 +1,232 @@
+# Basic sanity checks on the example printer config files
+GCODE move.gcode
+
+# Example kinematic files
+DICTIONARY atmega2560.dict
+CONFIG ../../config/example-cartesian.cfg
+CONFIG ../../config/example-corexy.cfg
+CONFIG ../../config/example-corexz.cfg
+CONFIG ../../config/example-hybrid-corexy.cfg
+CONFIG ../../config/example-hybrid-corexz.cfg
+CONFIG ../../config/example-delta.cfg
+CONFIG ../../config/example-rotary-delta.cfg
+CONFIG ../../config/example-winch.cfg
+
+# Printers using the atmega2560
+DICTIONARY atmega2560.dict
+CONFIG ../../config/generic-einsy-rambo.cfg
+CONFIG ../../config/generic-fysetc-f6.cfg
+CONFIG ../../config/generic-gt2560.cfg
+CONFIG ../../config/generic-mini-rambo.cfg
+CONFIG ../../config/generic-rambo.cfg
+CONFIG ../../config/generic-ramps.cfg
+CONFIG ../../config/generic-rumba.cfg
+CONFIG ../../config/generic-ultimaker-ultimainboard-v2.cfg
+CONFIG ../../config/kit-zav3d-2019.cfg
+CONFIG ../../config/printer-adimlab-2018.cfg
+CONFIG ../../config/printer-anycubic-4max-2018.cfg
+CONFIG ../../config/printer-anycubic-4maxpro-2.0-2021.cfg
+CONFIG ../../config/printer-anycubic-i3-mega-2017.cfg
+CONFIG ../../config/printer-anycubic-kossel-2016.cfg
+CONFIG ../../config/printer-anycubic-kossel-plus-2017.cfg
+CONFIG ../../config/printer-creality-cr10-v3-2020.cfg
+CONFIG ../../config/printer-creality-cr10s-2017.cfg
+CONFIG ../../config/printer-creality-cr20-2018.cfg
+CONFIG ../../config/printer-creality-cr20-pro-2019.cfg
+CONFIG ../../config/printer-creality-ender5plus-2019.cfg
+CONFIG ../../config/printer-eryone-thinker-series-v2-2020.cfg
+CONFIG ../../config/printer-flashforge-creator-pro-2018.cfg
+CONFIG ../../config/printer-hiprecy-leo-2019.cfg
+CONFIG ../../config/printer-longer-lk4-pro-2019.cfg
+CONFIG ../../config/printer-lulzbot-mini1-2016.cfg
+CONFIG ../../config/printer-lulzbot-taz6-2017.cfg
+CONFIG ../../config/printer-lulzbot-taz6-dual-v3-2017.cfg
+CONFIG ../../config/printer-makergear-m2-2012.cfg
+CONFIG ../../config/printer-makergear-m2-2016.cfg
+CONFIG ../../config/printer-micromake-d1-2016.cfg
+CONFIG ../../config/printer-mtw-create-2015.cfg
+CONFIG ../../config/printer-robo3d-r2-2017.cfg
+CONFIG ../../config/printer-seemecnc-rostock-max-v2-2015.cfg
+CONFIG ../../config/printer-sovol-sv01-2020.cfg
+CONFIG ../../config/printer-sunlu-s8-2020.cfg
+CONFIG ../../config/printer-tevo-flash-2018.cfg
+CONFIG ../../config/printer-tevo-tarantula-pro-2020.cfg
+CONFIG ../../config/printer-velleman-k8200-2013.cfg
+CONFIG ../../config/printer-velleman-k8800-2017.cfg
+CONFIG ../../config/printer-wanhao-duplicator-i3-mini-2017.cfg
+CONFIG ../../config/printer-wanhao-duplicator-i3-plus-2017.cfg
+CONFIG ../../config/printer-wanhao-duplicator-i3-plus-mark2-2019.cfg
+CONFIG ../../config/printer-wanhao-duplicator-6-2016.cfg
+CONFIG ../../config/printer-wanhao-duplicator-9-2018.cfg
+
+# Printers using the atmega1280
+DICTIONARY atmega1280.dict
+CONFIG ../../config/generic-mightyboard.cfg
+CONFIG ../../config/generic-minitronics1.cfg
+
+# Printers using the atmega1284p
+DICTIONARY atmega1284p.dict
+CONFIG ../../config/generic-melzi.cfg
+CONFIG ../../config/printer-anet-a4-2018.cfg
+CONFIG ../../config/printer-anet-a8-2017.cfg
+CONFIG ../../config/printer-anet-e10-2018.cfg
+CONFIG ../../config/printer-anet-e16-2019.cfg
+CONFIG ../../config/printer-creality-cr10-2017.cfg
+CONFIG ../../config/printer-creality-cr10mini-2017.cfg
+CONFIG ../../config/printer-creality-ender2-2017.cfg
+CONFIG ../../config/printer-creality-ender3-2018.cfg
+CONFIG ../../config/printer-creality-ender5-2019.cfg
+CONFIG ../../config/printer-tronxy-p802e-2020.cfg
+CONFIG ../../config/printer-tronxy-p802m-2020.cfg
+CONFIG ../../config/printer-tronxy-x5s-2018.cfg
+CONFIG ../../config/printer-tronxy-x8-2018.cfg
+CONFIG ../../config/printer-wanhao-duplicator-i3-v2.1-2017.cfg
+
+# Printers using the atmega644
+DICTIONARY atmega644p.dict
+CONFIG ../../config/generic-simulavr.cfg
+
+# Printers using the at90usb1286
+DICTIONARY at90usb1286.dict
+CONFIG ../../config/generic-printrboard.cfg
+
+# Printers using the sam3x8c
+DICTIONARY sam3x8c.dict
+CONFIG ../../config/generic-printrboard-g2.cfg
+
+# Printers using the sam3x8e
+DICTIONARY sam3x8e.dict
+CONFIG ../../config/generic-alligator-r2.cfg
+CONFIG ../../config/generic-alligator-r3.cfg
+CONFIG ../../config/generic-archim2.cfg
+CONFIG ../../config/generic-radds.cfg
+CONFIG ../../config/generic-ruramps-v1.3.cfg
+
+# Printers using the sam4s8c
+DICTIONARY sam4s8c.dict
+CONFIG ../../config/generic-duet2-maestro.cfg
+
+# Printers using the sam4e8e
+DICTIONARY sam4e8e.dict
+CONFIG ../../config/generic-duet2.cfg
+CONFIG ../../config/generic-duet2-duex.cfg
+CONFIG ../../config/printer-modix-big60-2020.cfg
+
+# Printers using the samd51
+DICTIONARY samd51p20.dict
+CONFIG ../../config/generic-duet3-mini.cfg
+
+# Printers using the lpc176x
+DICTIONARY lpc176x.dict
+CONFIG ../../config/generic-azteeg-x5-mini-v3.cfg
+CONFIG ../../config/generic-bigtreetech-skr-e3-turbo.cfg
+CONFIG ../../config/generic-bigtreetech-skr-v1.1.cfg
+CONFIG ../../config/generic-bigtreetech-skr-v1.3.cfg
+CONFIG ../../config/generic-bigtreetech-skr-v1.4.cfg
+CONFIG ../../config/generic-mks-sgenl.cfg
+CONFIG ../../config/generic-re-arm.cfg
+CONFIG ../../config/generic-smoothieboard.cfg
+CONFIG ../../config/generic-th3d-ezboard-lite-v1.2.cfg
+
+# Printers using the stm32f070
+DICTIONARY stm32f070.dict
+CONFIG ../../config/printer-monoprice-mini-delta-2017.cfg
+CONFIG ../../config/printer-monoprice-select-mini-v2-2018.cfg
+
+# Printers using the stm32f103
+DICTIONARY stm32f103.dict
+CONFIG ../../config/generic-bigtreetech-skr-cr6-v1.0.cfg
+CONFIG ../../config/generic-bigtreetech-skr-e3-dip.cfg
+CONFIG ../../config/generic-bigtreetech-skr-mini.cfg
+CONFIG ../../config/generic-bigtreetech-skr-mini-e3-v1.0.cfg
+CONFIG ../../config/generic-bigtreetech-skr-mini-e3-v1.2.cfg
+CONFIG ../../config/generic-bigtreetech-skr-mini-e3-v2.0.cfg
+CONFIG ../../config/generic-bigtreetech-skr-mini-mz.cfg
+CONFIG ../../config/printer-anycubic-vyper-2021.cfg
+CONFIG ../../config/printer-monoprice-select-mini-v1-2016.cfg
+
+# Printers using the stm32f103 via serial
+DICTIONARY stm32f103-serial.dict
+CONFIG ../../config/generic-creality-v4.2.7.cfg
+CONFIG ../../config/generic-creality-v4.2.10.cfg
+CONFIG ../../config/generic-fysetc-cheetah-v1.1.cfg
+CONFIG ../../config/generic-fysetc-cheetah-v1.2.cfg
+CONFIG ../../config/generic-mks-robin-e3.cfg
+CONFIG ../../config/generic-mks-robin-nano-v1.cfg
+CONFIG ../../config/generic-mks-robin-nano-v2.cfg
+CONFIG ../../config/printer-alfawise-u30-2018.cfg
+CONFIG ../../config/printer-creality-cr10-smart-pro-2022.cfg
+CONFIG ../../config/printer-creality-cr30-2021.cfg
+CONFIG ../../config/printer-creality-cr6se-2020.cfg
+CONFIG ../../config/printer-creality-cr6se-2021.cfg
+CONFIG ../../config/printer-creality-ender2pro-2021.cfg
+CONFIG ../../config/printer-creality-ender3-s1-2021.cfg
+CONFIG ../../config/printer-creality-ender3-v2-2020.cfg
+CONFIG ../../config/printer-creality-ender3max-2021.cfg
+CONFIG ../../config/printer-creality-ender3pro-2020.cfg
+CONFIG ../../config/printer-creality-ender5pro-2020.cfg
+CONFIG ../../config/printer-creality-ender6-2020.cfg
+CONFIG ../../config/printer-creality-sermoonD1-2021.cfg
+CONFIG ../../config/printer-creality-sermoonV1-2022.cfg
+CONFIG ../../config/printer-elegoo-neptune2-2021.cfg
+CONFIG ../../config/printer-eryone-er20-2021.cfg
+CONFIG ../../config/printer-flsun-q5-2020.cfg
+CONFIG ../../config/printer-flsun-qqs-2020.cfg
+CONFIG ../../config/printer-fokoos-odin5-f3-2021.cfg
+CONFIG ../../config/printer-tronxy-x5sa-v6-2019.cfg
+CONFIG ../../config/printer-tronxy-x5sa-pro-2020.cfg
+CONFIG ../../config/printer-tronxy-xy-2-Pro-2020.cfg
+CONFIG ../../config/printer-twotrees-sapphire-plus-sp-5-v1-2020.cfg
+CONFIG ../../config/printer-twotrees-sapphire-plus-sp-5-v1.1-2021.cfg
+CONFIG ../../config/printer-twotrees-sapphire-pro-sp-3-2020.cfg
+
+# Printers using the stm32f405
+DICTIONARY stm32f405.dict
+CONFIG ../../config/generic-mellow-fly-gemini-v1.cfg
+CONFIG ../../config/generic-mellow-fly-gemini-v2.cfg
+
+# Printers using the stm32f407
+DICTIONARY stm32f407.dict
+CONFIG ../../config/generic-bigtreetech-e3-rrf-v1.1.cfg
+CONFIG ../../config/generic-bigtreetech-gtr.cfg
+CONFIG ../../config/generic-bigtreetech-skr-pro.cfg
+CONFIG ../../config/generic-bigtreetech-skr-2.cfg
+CONFIG ../../config/generic-flyboard.cfg
+CONFIG ../../config/generic-mellow-fly-cdy-v3.cfg
+CONFIG ../../config/generic-mellow-super-infinty-hv.cfg
+CONFIG ../../config/generic-mks-robin-nano-v3.cfg
+CONFIG ../../config/generic-prusa-buddy.cfg
+CONFIG ../../config/generic-th3d-ezboard-lite-v2.0.cfg
+CONFIG ../../config/printer-biqu-b1-se-plus-2022.cfg
+CONFIG ../../config/printer-prusa-mini-plus-2020.cfg
+
+# Printers using the stm32f446
+DICTIONARY stm32f446.dict
+CONFIG ../../config/generic-bigtreetech-octopus.cfg
+CONFIG ../../config/generic-fysetc-s6.cfg
+CONFIG ../../config/generic-fysetc-s6-v2.cfg
+CONFIG ../../config/generic-fysetc-spider.cfg
+CONFIG ../../config/generic-mks-rumba32-v1.0.cfg
+
+# Printers using the stm32h743
+DICTIONARY stm32h743.dict
+CONFIG ../../config/printer-biqu-bx-2021.cfg
+
+# Printers using the stm32g0b1
+DICTIONARY stm32g0b1.dict
+CONFIG ../../config/generic-bigtreetech-skr-mini-e3-v3.0.cfg
+
+# Printers using the rp2040
+DICTIONARY rp2040.dict
+CONFIG ../../config/generic-bigtreetech-skr-pico-v1.0.cfg
+
+# Printers using the PRU
+DICTIONARY pru.dict host=linuxprocess.dict
+CONFIG ../../config/generic-cramps.cfg
+CONFIG ../../config/generic-replicape.cfg
+
+# Tests with multiple mcus
+DICTIONARY atmega2560.dict zboard=atmega2560.dict auxboard=atmega2560.dict
+CONFIG ../../config/sample-multi-mcu.cfg
+DICTIONARY atmega2560.dict z=atmega2560.dict
+CONFIG ../../config/kit-voron2-250mm.cfg

test/klippy/pwm.cfg

@@ -0,0 +1,22 @@
+[output_pin soft_pwm_pin]
+pin: PH5
+pwm: True
+value: 0
+shutdown_value: 0
+cycle_time: 0.01
+
+[output_pin hard_pwm_pin]
+pin: PH6
+pwm: True
+hardware_pwm: True
+value: 0
+shutdown_value: 0
+cycle_time: 0.01
+
+[mcu]
+serial: /dev/ttyACM0
+
+[printer]
+kinematics: none
+max_velocity: 300
+max_accel: 3000

test/klippy/pwm.test

@@ -0,0 +1,30 @@
+# Test case for pwm
+CONFIG pwm.cfg
+DICTIONARY atmega2560.dict
+
+# Hard PWM
+# Basic test
+SET_PIN PIN=hard_pwm_pin VALUE=0
+SET_PIN PIN=hard_pwm_pin VALUE=0.5
+SET_PIN PIN=hard_pwm_pin VALUE=0.5
+SET_PIN PIN=hard_pwm_pin VALUE=0.25
+SET_PIN PIN=hard_pwm_pin VALUE=1
+
+# Soft PWM
+# Test basic on off
+SET_PIN PIN=soft_pwm_pin VALUE=0
+SET_PIN PIN=soft_pwm_pin VALUE=0.5
+SET_PIN PIN=soft_pwm_pin VALUE=1
+
+# Test cycle time
+SET_PIN PIN=soft_pwm_pin VALUE=0 CYCLE_TIME=0.1
+SET_PIN PIN=soft_pwm_pin VALUE=1 CYCLE_TIME=0.5
+SET_PIN PIN=soft_pwm_pin VALUE=0.5 CYCLE_TIME=0.001
+SET_PIN PIN=soft_pwm_pin VALUE=0.75 CYCLE_TIME=0.01
+SET_PIN PIN=soft_pwm_pin VALUE=0.5 CYCLE_TIME=1
+
+# Test duplicate values
+SET_PIN PIN=soft_pwm_pin VALUE=0.5 CYCLE_TIME=0.5
+SET_PIN PIN=soft_pwm_pin VALUE=0.5 CYCLE_TIME=0.5
+SET_PIN PIN=soft_pwm_pin VALUE=0.75 CYCLE_TIME=0.5
+SET_PIN PIN=soft_pwm_pin VALUE=0.75 CYCLE_TIME=0.75