Add files via upload

test/klippy/macros.cfg

@@ -0,0 +1,132 @@
+# Test config with macros
+[stepper_x]
+step_pin: PF0
+dir_pin: PF1
+enable_pin: !PD7
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^PE5
+position_endstop: 0
+position_max: 200
+homing_speed: 50
+
+[stepper_y]
+step_pin: PF6
+dir_pin: !PF7
+enable_pin: !PF2
+microsteps: 16
+rotation_distance: 40
+endstop_pin: ^PJ1
+position_endstop: 0
+position_max: 200
+homing_speed: 50
+
+[stepper_z]
+step_pin: PL3
+dir_pin: PL1
+enable_pin: !PK0
+microsteps: 16
+rotation_distance: 8
+endstop_pin: ^PD3
+position_endstop: 0.5
+position_max: 200
+
+[extruder]
+step_pin: PA4
+dir_pin: PA6
+enable_pin: !PA2
+microsteps: 16
+rotation_distance: 33.5
+nozzle_diameter: 0.500
+filament_diameter: 3.500
+heater_pin: PB4
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: PK5
+control: pid
+pid_Kp: 22.2
+pid_Ki: 1.08
+pid_Kd: 114
+min_temp: 0
+max_temp: 210
+
+[heater_bed]
+heater_pin: PH5
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: PK6
+control: watermark
+min_temp: 0
+max_temp: 110
+
+[mcu]
+serial: /dev/ttyACM0
+
+[printer]
+kinematics: cartesian
+max_velocity: 300
+max_accel: 3000
+max_z_velocity: 5
+max_z_accel: 100
+
+[gcode_macro TEST_SAVE_RESTORE]
+gcode:
+  SAVE_GCODE_STATE NAME=TESTIT1
+  G92 Z10
+  RESTORE_GCODE_STATE NAME=TESTIT1
+  G92 Z0
+
+[gcode_macro TEST_expression]
+gcode:
+  {% if printer.gcode_move.gcode_position.x != 0.0 %}
+    M112
+  {% else %}
+    { action_respond_info("TEST_expression") }
+  {% endif %}
+
+[gcode_macro TEST_variable]
+variable_t: 12.0
+gcode:
+  { action_respond_info("TEST_variable") }
+  {% if t - 12.0 != printer.toolhead.position.y %}
+    M112
+  {% endif %}
+  {% if printer["gcode_macro TEST_variable"].t - 12.0 != 0.0 %}
+    M112
+  {% endif %}
+  SET_GCODE_VARIABLE MACRO=TEST_variable VARIABLE=t VALUE=17
+  TEST_variable_part2
+
+[gcode_macro TEST_variable_part2]
+gcode:
+  { action_respond_info("TEST_variable_part2") }
+  {% if printer["gcode_macro TEST_variable"].t != 17.0 %}
+    M112
+  {% endif %}
+
+[gcode_macro TEST_param]
+gcode:
+  { action_respond_info("TEST_param") }
+  {% if params.T != "123" %}
+    M112
+  {% endif %}
+
+[gcode_macro TEST_in]
+gcode:
+  {% if "abc" in printer or "toolhead" not in printer %}
+    M112
+  {% endif %}
+
+# A utf8 test (with utf8 characters such as ° )
+[gcode_macro TEST_unicode]  ; Also test end-of-line comments ( ° )
+variable_ABC: 25            # Another end-of-line comment test ( ° )
+description: A unicode test °
+gcode: G28
+
+# Main test start point
+[gcode_macro TESTIT]
+gcode:
+  TEST_SAVE_RESTORE
+  TEST_expression
+  TEST_variable
+  TEST_param T=123
+  TEST_unicode
+  TEST_in