QIDITECH/klipper
1
0
Fork 0
mirror of https://github.com/QIDITECH/klipper.git synced 2026-02-03 01:18:43 +03:00
Code Issues Packages Projects Releases Wiki Activity

plus4的klipper版本

Browse Source
This commit is contained in:
whb0514
2024-09-02 13:37:34 +08:00
parent 653d7a8f6e
commit b90736975b
1006 changed files with 1195894 additions and 11114 deletions
Download Patch File Download Diff File Expand all files Collapse all files

49
config/sample-macros.cfg
View File

@@ -10,7 +10,7 @@
######################################################################
# Replace the slicer's custom start and end g-code scripts with
# START_PRINT and END_PRINT.
# START_PRINT and END_PRINT. See docs/Slicers.md for more information on using these macros.
[gcode_macro START_PRINT]
gcode:
@@ -261,3 +261,50 @@ gcode:
{% if 'U' in params %}
EXCLUDE_OBJECT RESET=1 NAME={params.U}
{% endif %}
######################################################################
# G130: Set digital potentiometer value
######################################################################
# The macro below uses the MCP4018 SET_DIGIPOT command to implement
# a `G130` as used on classic Mightyboard-based printers such as
# The Makerbot Replicator 2/2X.
#
# The `G130` command can be used to lower the stepper current
# during preheating and raise the current again prior to starting
# the print. This is necessary for printers with smaller power
# supplies that needed all the power to heat the bed.
#
# This macro requires one or more [mcp4018] configuration sections:
# (x_axis_pot, y_axis_pot, z_axis_pot, a_axis_pot, b_axis_pot)
#
# Example: G130 X20 Y20 Z20 A20 B20 ; Lower stepper Vrefs while heating
[gcode_macro G130]
gcode:
M400
{% if ('X' in params) and ('mcp4018 x_axis_pot' in printer.configfile.config) %}
{% set x_value = params['X']|float %}
{% set x_axis_pot_scale = printer.configfile.config["mcp4018 x_axis_pot"].scale|float %}
SET_DIGIPOT DIGIPOT=x_axis_pot WIPER={ x_axis_pot_scale * (x_value / 127.0)}
{% endif %}
{% if ('Y' in params) and ('mcp4018 y_axis_pot' in printer.configfile.config) %}
{% set y_value = params['Y']|float %}
{% set y_axis_pot_scale = printer.configfile.config["mcp4018 y_axis_pot"].scale|float %}
SET_DIGIPOT DIGIPOT=y_axis_pot WIPER={ y_axis_pot_scale * (y_value / 127.0)}
{% endif %}
{% if ('Z' in params) and ('mcp4018 z_axis_pot' in printer.configfile.config) %}
{% set z_value = params['Z']|float %}
{% set z_axis_pot_scale = printer.configfile.config["mcp4018 z_axis_pot"].scale|float %}
SET_DIGIPOT DIGIPOT=z_axis_pot WIPER={ z_axis_pot_scale * (z_value / 127.0)}
{% endif %}
{% if ('A' in params) and ('mcp4018 a_axis_pot' in printer.configfile.config) %}
{% set a_value = params['A']|float %}
{% set a_axis_pot_scale = printer.configfile.config["mcp4018 a_axis_pot"].scale|float %}
SET_DIGIPOT DIGIPOT=a_axis_pot WIPER={ a_axis_pot_scale * (a_value / 127.0)}
{% endif %}
{% if ('B' in params) and ('mcp4018 b_axis_pot' in printer.configfile.config) %}
{% set b_value = params['B']|float %}
{% set b_axis_pot_scale = printer.configfile.config["mcp4018 b_axis_pot"].scale|float %}
SET_DIGIPOT DIGIPOT=b_axis_pot WIPER={ b_axis_pot_scale * (b_value / 127.0)}
{% endif %}