QIDITECH/klipper
1
0
Fork 0
mirror of https://github.com/QIDITECH/klipper.git synced 2026-01-30 23:48:43 +03:00
Code Issues Packages Projects Releases Wiki Activity

plus4的klipper版本

Browse Source
This commit is contained in:
whb0514
2024-09-02 13:37:34 +08:00
parent 653d7a8f6e
commit b90736975b
1006 changed files with 1195894 additions and 11114 deletions
Download Patch File Download Diff File Expand all files Collapse all files

18
config/sample-bigtreetech-hermit-crab-canbus.cfg
View File

@@ -10,21 +10,21 @@ serial: /dev/serial/by-id/usb-Klipper_Klipper_firmware_12345-if00
#canbus_uuid: 0e0d81e4210c
[adxl345]
cs_pin: HermitCrab: PB12
cs_pin: HermitCrab:PB12
spi_bus: spi2
axes_map: y,z,-x
[extruder]
step_pin: HermitCrab: PA6
dir_pin: !HermitCrab: PA7
enable_pin: !HermitCrab: PA5
step_pin: HermitCrab:PA6
dir_pin: !HermitCrab:PA7
enable_pin: !HermitCrab:PA5
microsteps: 16
rotation_distance: 33.500
nozzle_diameter: 0.400
filament_diameter: 1.750
heater_pin: HermitCrab: PA2
heater_pin: HermitCrab:PA2
sensor_type: EPCOS 100K B57560G104F
sensor_pin: HermitCrab: PA1
sensor_pin: HermitCrab:PA1
control: pid
pid_Kp: 21.527
pid_Ki: 1.063
@@ -33,15 +33,15 @@ min_temp: 0
max_temp: 250
[tmc2209 extruder]
uart_pin: HermitCrab: PB0
uart_pin: HermitCrab:PB0
run_current: 0.650
stealthchop_threshold: 999999
[fan]
pin: HermitCrab: PA4
pin: HermitCrab:PA4
[heater_fan hotend_fan]
pin: HermitCrab: PA3
pin: HermitCrab:PA3
heater: extruder
heater_temp: 50.0