QIDITECH/QIDI_Q1_Pro
1
0
Fork 0
mirror of https://github.com/QIDITECH/QIDI_Q1_Pro.git synced 2026-01-30 15:38:43 +03:00
Code Issues Packages Projects Releases 7 Wiki Activity

Update config files

Browse Source
This commit is contained in:
CChen616
2024-05-03 09:56:18 +08:00
parent 9618b8bfca
commit d1d606ada4
2 changed files with 97 additions and 27 deletions
Download Patch File Download Diff File Expand all files Collapse all files

104
config/gcode_macro.cfg
View File

@@ -35,10 +35,17 @@ gcode:
{% set z = printer.save_variables.variables.z_offset %}
SET_GCODE_OFFSET Z={z} MOVE=0
[gcode_macro CLEAR_NOZZLE]
[gcode_macro CLEAR_NOZZLE_PLR]
gcode:
{% set hotendtemp = params.HOTEND|int %}
G1 Z60 F600
{% set hotendtemp = params.HOTEND|default(250)|int %}
{% if (printer.gcode_move.position.z ) < 35 %}
G90
G1 Z35 F900
{% else %}
G91
G1 Z5 F900
G90
{% endif %}
G1 X97 F9000
G1 Y254 F9000
@@ -47,6 +54,43 @@ gcode:
G92 E0
G1 E80 F400
M106 S255
G1 X98 F500
G1 X85 F2000
G1 X98 F2000
G1 X85 F2000
G1 X98 F2000
G1 X85 F2000
G1 X98 F2000
G1 X85 F2000
G1 X98 F2000
G1 X85 F2000
G1 X98 F2000
G1 X85 F2000
G1 X98 F2000
G1 Y240 F9000
[gcode_macro CLEAR_NOZZLE]
gcode:
{% set hotendtemp = params.HOTEND|int %}
{% if (printer.gcode_move.position.z ) < 35 %}
G1 Z35 F900
{% else %}
G91
G1 Z5 F900
G90
{% endif %}
G1 X97 F9000
G1 Y254 F9000
M109 S{hotendtemp}
G92 E0
G1 E80 F400
M106 S255
M400
M106 P2 S0
M104 S0
TEMPERATURE_WAIT SENSOR=extruder MAXIMUM={hotendtemp-30}
@@ -120,7 +164,7 @@ gcode:
CLEAR_NOZZLE HOTEND={hotendtemp}
M190 S{bedtemp}
Z_TILT_ADJUST
# Z_TILT_ADJUST
G29
G0 Z50 F600
G0 X0 Y0 F6000
@@ -129,11 +173,21 @@ gcode:
M109 S{hotendtemp}
M204 S10000
ENABLE_ALL_SENSOR
save_last_file
[gcode_macro ENABLE_ALL_SENSOR]
gcode:
ENABLE_FILAMENT_WIDTH_SENSOR
RESET_FILAMENT_WIDTH_SENSOR
query_filament_width
SET_FILAMENT_SENSOR SENSOR=fila ENABLE=1
save_last_file
[gcode_macro DISABLE_ALL_SENSOR]
gcode:
SET_FILAMENT_SENSOR SENSOR=fila ENABLE=0
DISABLE_FILAMENT_WIDTH_SENSOR
[gcode_macro AUTOTUNE_SHAPERS]
variable_autotune_shapers: 'ei'
@@ -149,7 +203,7 @@ gcode:
SET_STEPPER_ENABLE STEPPER=stepper_z1 enable=1
SET_STEPPER_ENABLE STEPPER=extruder enable=0
[gcode_macro KINEMATIC_POSITION]
[gcode_macro DETECT_INTERRUPTION]
gcode:
{% set was_interrupted = printer.save_variables.variables.was_interrupted %}
{% if was_interrupted %}
@@ -165,12 +219,12 @@ gcode:
SET_STEPPER_ENABLE STEPPER=stepper_z1 enable=1
BED_MESH_CLEAR
SET_FILAMENT_SENSOR SENSOR=fila ENABLE=0
{% set was_interrupted = printer.save_variables.variables.was_interrupted %}
{% if was_interrupted %}
M118 Detected unexpected interruption during the last print. Do you want to resume printing? (Do not move the extruder before resuming.)
M118 Yes: RESUME_INTERRUPTED
M118 No: CLEAR_LAST_FILE
{% endif %}
# {% set was_interrupted = printer.save_variables.variables.was_interrupted %}
# {% if was_interrupted %}
# M118 Detected unexpected interruption during the last print. Do you want to resume printing? (Do not move the extruder before resuming.)
# M118 Yes: RESUME_INTERRUPTED
# M118 No: CLEAR_LAST_FILE
# {% endif %}
[homing_override]
axes:xyz
@@ -214,9 +268,9 @@ gcode:
{% if params.Z is undefined %}
SET_KINEMATIC_POSITION X=0
SET_KINEMATIC_POSITION Y=0
SET_KINEMATIC_POSITION Z={printer.toolhead.axis_maximum.z-5}
SET_KINEMATIC_POSITION Z={printer.toolhead.axis_maximum.z-10}
G91
G1 Z5 F600
G1 Z7 F600
G1 X10 F2400
G1 Y10 F2400
G4 P2000
@@ -239,7 +293,7 @@ gcode:
BEEP I=1 DUR=100
G1 X10 F1200
SET_KINEMATIC_POSITION Z={printer.toolhead.axis_maximum.z-5}
SET_KINEMATIC_POSITION Z={printer.toolhead.axis_maximum.z-10}
G90
G1 X120 Y120 F7800
@@ -282,8 +336,7 @@ gcode:
SET_STEPPER_ENABLE STEPPER=stepper_z1 enable=1
SET_STEPPER_ENABLE STEPPER=extruder enable=0
SET_FILAMENT_SENSOR SENSOR=fila ENABLE=0
DISABLE_FILAMENT_WIDTH_SENSOR
DISABLE_ALL_SENSOR
SET_GCODE_OFFSET Z=0 MOVE=0
BED_MESH_CLEAR
G31
@@ -321,8 +374,7 @@ gcode:
SET_STEPPER_ENABLE STEPPER=stepper_z1 enable=1
SET_STEPPER_ENABLE STEPPER=extruder enable=0
SET_FILAMENT_SENSOR SENSOR=fila ENABLE=0
DISABLE_FILAMENT_WIDTH_SENSOR
DISABLE_ALL_SENSOR
SET_GCODE_OFFSET Z=0 MOVE=0
BED_MESH_CLEAR
G31
@@ -345,6 +397,8 @@ gcode:
SET_FILAMENT_SENSOR SENSOR=fila ENABLE=0 ; disable filament sensor
SAVE_GCODE_STATE NAME=PAUSE ; save current print position for resume
BASE_PAUSE ; pause print
G92 E0
G1 E-5 F1800
{% if (printer.gcode_move.position.z ) < z %}
G91 ; relative positioning
G1 Z{z} F900 ; raise Z up by z hop amount
@@ -554,7 +608,7 @@ gcode:
[gcode_macro M4028]
gcode:
G28
Z_TILT_ADJUST
# Z_TILT_ADJUST
G28
get_zoffset
M400
@@ -569,12 +623,16 @@ gcode:
M118 Position init complete
CLEAR_NOZZLE HOTEND=240
Z_TILT_ADJUST
# Z_TILT_ADJUST
G28
get_zoffset
[gcode_macro M4030]
gcode:
REVERSE_HOMING
G91
G1 Z-30
G90
BED_MESH_CLEAR
SET_GCODE_OFFSET Z=0 MOVE=0
G28
@@ -590,7 +648,7 @@ gcode:
G0 E15 F400
G4 P1000
G92 E0
G1 E-80 F800
G1 E-90 F800
M400
M118 Unload finish
@@ -603,7 +661,7 @@ gcode:
M118 Load finish
[output_pin sound]
pin: U_1:PA13
pin: gpio8
value:0
[gcode_macro beep_on]

20
config/printer.cfg
View File

@@ -10,6 +10,8 @@
# modify: delete comments
# add time_update macro
# [bed_mesh] 6,6 ->8,8
#V4.4.19 2024-4-16
# modify: add [chamber_fan chamber_fan]
[include timelapse.cfg]
[include Adaptive_Mesh.cfg]
[include gcode_macro.cfg]
@@ -180,13 +182,17 @@ microsteps: 128
rotation_distance: 4
full_steps_per_rotation: 200
endstop_pin:probe:z_virtual_endstop #U_1:PC3 for Z-max
endstop_pin_reverse:tmc2209_stepper_z:virtual_endstop
position_endstop:-0.2
position_endstop_reverse:248
position_max:248
position_min: -6
position_min: -4
homing_speed: 8
homing_speed_reverse: 8
second_homing_speed: 10
homing_retract_dist: 5.0
homing_positive_dir:false
homing_positive_dir_reverse:true
step_pulse_duration:0.0000001
[stepper_z1]
@@ -197,6 +203,7 @@ microsteps: 128
rotation_distance: 4
full_steps_per_rotation: 200
step_pulse_duration:0.0000001
endstop_pin_reverse:tmc2209_stepper_z1:virtual_endstop
[z_tilt]
z_positions:
@@ -244,6 +251,8 @@ run_current: 0.6
#hold_current: 0.17
interpolate: True
stealthchop_threshold: 9999999999
diag_pin:^U_1:PC12
driver_SGTHRS:140
[tmc2209 stepper_z1]
uart_pin:U_1: PB7
@@ -251,6 +260,8 @@ run_current: 0.6
#hold_current: 0.17
interpolate: True
stealthchop_threshold: 9999999999
diag_pin:^U_1:PA13
driver_SGTHRS:140
[heater_bed]
heater_pin: U_1:PB10
@@ -312,15 +323,16 @@ hardware_pwm: false
kick_start_time: 0.100
off_below: 0.0
[heater_fan chamber_fan]
[chamber_fan chamber_fan]
pin:U_1:PA4
max_power: 1.0
shutdown_speed: 0
kick_start_time: 0.5
heater: chamber
heater_temp: 35
heater:chamber
fan_speed: 1.0
off_below: 0
idle_timeout:60
idle_speed:1.0
[heater_fan hotend_fan]
pin:gpio25