QIDITECH/QIDI_Q1_Pro
1
0
Fork 0
mirror of https://github.com/QIDITECH/QIDI_Q1_Pro.git synced 2026-01-30 23:48:43 +03:00
Code Issues Packages Projects Releases 7 Wiki Activity

Update config files

Browse Source
This commit is contained in:
CChen616
2024-05-03 09:56:18 +08:00
parent 9618b8bfca
commit d1d606ada4
2 changed files with 97 additions and 27 deletions
Download Patch File Download Diff File Expand all files Collapse all files

104
config/gcode_macro.cfg
View File

@@ -35,10 +35,17 @@ gcode:
{% set z = printer.save_variables.variables.z_offset %} {% set z = printer.save_variables.variables.z_offset %}
SET_GCODE_OFFSET Z={z} MOVE=0 SET_GCODE_OFFSET Z={z} MOVE=0
[gcode_macro CLEAR_NOZZLE] [gcode_macro CLEAR_NOZZLE_PLR]
gcode: gcode:
{% set hotendtemp = params.HOTEND|int %} {% set hotendtemp = params.HOTEND|default(250)|int %}
G1 Z60 F600 {% if (printer.gcode_move.position.z ) < 35 %}
G90
G1 Z35 F900
{% else %}
G91
G1 Z5 F900
G90
{% endif %}
G1 X97 F9000 G1 X97 F9000
G1 Y254 F9000 G1 Y254 F9000
@@ -47,6 +54,43 @@ gcode:
G92 E0 G92 E0
G1 E80 F400 G1 E80 F400
M106 S255 M106 S255
G1 X98 F500
G1 X85 F2000
G1 X98 F2000
G1 X85 F2000
G1 X98 F2000
G1 X85 F2000
G1 X98 F2000
G1 X85 F2000
G1 X98 F2000
G1 X85 F2000
G1 X98 F2000
G1 X85 F2000
G1 X98 F2000
G1 Y240 F9000
[gcode_macro CLEAR_NOZZLE]
gcode:
{% set hotendtemp = params.HOTEND|int %}
{% if (printer.gcode_move.position.z ) < 35 %}
G1 Z35 F900
{% else %}
G91
G1 Z5 F900
G90
{% endif %}
G1 X97 F9000
G1 Y254 F9000
M109 S{hotendtemp}
G92 E0
G1 E80 F400
M106 S255
M400
M106 P2 S0 M106 P2 S0
M104 S0 M104 S0
TEMPERATURE_WAIT SENSOR=extruder MAXIMUM={hotendtemp-30} TEMPERATURE_WAIT SENSOR=extruder MAXIMUM={hotendtemp-30}
@@ -120,7 +164,7 @@ gcode:
CLEAR_NOZZLE HOTEND={hotendtemp} CLEAR_NOZZLE HOTEND={hotendtemp}
M190 S{bedtemp} M190 S{bedtemp}
Z_TILT_ADJUST # Z_TILT_ADJUST
G29 G29
G0 Z50 F600 G0 Z50 F600
G0 X0 Y0 F6000 G0 X0 Y0 F6000
@@ -129,11 +173,21 @@ gcode:
M109 S{hotendtemp} M109 S{hotendtemp}
M204 S10000 M204 S10000
ENABLE_ALL_SENSOR
save_last_file
[gcode_macro ENABLE_ALL_SENSOR]
gcode:
ENABLE_FILAMENT_WIDTH_SENSOR ENABLE_FILAMENT_WIDTH_SENSOR
RESET_FILAMENT_WIDTH_SENSOR RESET_FILAMENT_WIDTH_SENSOR
query_filament_width query_filament_width
SET_FILAMENT_SENSOR SENSOR=fila ENABLE=1 SET_FILAMENT_SENSOR SENSOR=fila ENABLE=1
save_last_file
[gcode_macro DISABLE_ALL_SENSOR]
gcode:
SET_FILAMENT_SENSOR SENSOR=fila ENABLE=0
DISABLE_FILAMENT_WIDTH_SENSOR
[gcode_macro AUTOTUNE_SHAPERS] [gcode_macro AUTOTUNE_SHAPERS]
variable_autotune_shapers: 'ei' variable_autotune_shapers: 'ei'
@@ -149,7 +203,7 @@ gcode:
SET_STEPPER_ENABLE STEPPER=stepper_z1 enable=1 SET_STEPPER_ENABLE STEPPER=stepper_z1 enable=1
SET_STEPPER_ENABLE STEPPER=extruder enable=0 SET_STEPPER_ENABLE STEPPER=extruder enable=0
[gcode_macro KINEMATIC_POSITION] [gcode_macro DETECT_INTERRUPTION]
gcode: gcode:
{% set was_interrupted = printer.save_variables.variables.was_interrupted %} {% set was_interrupted = printer.save_variables.variables.was_interrupted %}
{% if was_interrupted %} {% if was_interrupted %}
@@ -165,12 +219,12 @@ gcode:
SET_STEPPER_ENABLE STEPPER=stepper_z1 enable=1 SET_STEPPER_ENABLE STEPPER=stepper_z1 enable=1
BED_MESH_CLEAR BED_MESH_CLEAR
SET_FILAMENT_SENSOR SENSOR=fila ENABLE=0 SET_FILAMENT_SENSOR SENSOR=fila ENABLE=0
{% set was_interrupted = printer.save_variables.variables.was_interrupted %} # {% set was_interrupted = printer.save_variables.variables.was_interrupted %}
{% if was_interrupted %} # {% if was_interrupted %}
M118 Detected unexpected interruption during the last print. Do you want to resume printing? (Do not move the extruder before resuming.) # M118 Detected unexpected interruption during the last print. Do you want to resume printing? (Do not move the extruder before resuming.)
M118 Yes: RESUME_INTERRUPTED # M118 Yes: RESUME_INTERRUPTED
M118 No: CLEAR_LAST_FILE # M118 No: CLEAR_LAST_FILE
{% endif %} # {% endif %}
[homing_override] [homing_override]
axes:xyz axes:xyz
@@ -214,9 +268,9 @@ gcode:
{% if params.Z is undefined %} {% if params.Z is undefined %}
SET_KINEMATIC_POSITION X=0 SET_KINEMATIC_POSITION X=0
SET_KINEMATIC_POSITION Y=0 SET_KINEMATIC_POSITION Y=0
SET_KINEMATIC_POSITION Z={printer.toolhead.axis_maximum.z-5} SET_KINEMATIC_POSITION Z={printer.toolhead.axis_maximum.z-10}
G91 G91
G1 Z5 F600 G1 Z7 F600
G1 X10 F2400 G1 X10 F2400
G1 Y10 F2400 G1 Y10 F2400
G4 P2000 G4 P2000
@@ -239,7 +293,7 @@ gcode:
BEEP I=1 DUR=100 BEEP I=1 DUR=100
G1 X10 F1200 G1 X10 F1200
SET_KINEMATIC_POSITION Z={printer.toolhead.axis_maximum.z-5} SET_KINEMATIC_POSITION Z={printer.toolhead.axis_maximum.z-10}
G90 G90
G1 X120 Y120 F7800 G1 X120 Y120 F7800
@@ -282,8 +336,7 @@ gcode:
SET_STEPPER_ENABLE STEPPER=stepper_z1 enable=1 SET_STEPPER_ENABLE STEPPER=stepper_z1 enable=1
SET_STEPPER_ENABLE STEPPER=extruder enable=0 SET_STEPPER_ENABLE STEPPER=extruder enable=0
SET_FILAMENT_SENSOR SENSOR=fila ENABLE=0 DISABLE_ALL_SENSOR
DISABLE_FILAMENT_WIDTH_SENSOR
SET_GCODE_OFFSET Z=0 MOVE=0 SET_GCODE_OFFSET Z=0 MOVE=0
BED_MESH_CLEAR BED_MESH_CLEAR
G31 G31
@@ -321,8 +374,7 @@ gcode:
SET_STEPPER_ENABLE STEPPER=stepper_z1 enable=1 SET_STEPPER_ENABLE STEPPER=stepper_z1 enable=1
SET_STEPPER_ENABLE STEPPER=extruder enable=0 SET_STEPPER_ENABLE STEPPER=extruder enable=0
SET_FILAMENT_SENSOR SENSOR=fila ENABLE=0 DISABLE_ALL_SENSOR
DISABLE_FILAMENT_WIDTH_SENSOR
SET_GCODE_OFFSET Z=0 MOVE=0 SET_GCODE_OFFSET Z=0 MOVE=0
BED_MESH_CLEAR BED_MESH_CLEAR
G31 G31
@@ -345,6 +397,8 @@ gcode:
SET_FILAMENT_SENSOR SENSOR=fila ENABLE=0 ; disable filament sensor SET_FILAMENT_SENSOR SENSOR=fila ENABLE=0 ; disable filament sensor
SAVE_GCODE_STATE NAME=PAUSE ; save current print position for resume SAVE_GCODE_STATE NAME=PAUSE ; save current print position for resume
BASE_PAUSE ; pause print BASE_PAUSE ; pause print
G92 E0
G1 E-5 F1800
{% if (printer.gcode_move.position.z ) < z %} {% if (printer.gcode_move.position.z ) < z %}
G91 ; relative positioning G91 ; relative positioning
G1 Z{z} F900 ; raise Z up by z hop amount G1 Z{z} F900 ; raise Z up by z hop amount
@@ -554,7 +608,7 @@ gcode:
[gcode_macro M4028] [gcode_macro M4028]
gcode: gcode:
G28 G28
Z_TILT_ADJUST # Z_TILT_ADJUST
G28 G28
get_zoffset get_zoffset
M400 M400
@@ -569,12 +623,16 @@ gcode:
M118 Position init complete M118 Position init complete
CLEAR_NOZZLE HOTEND=240 CLEAR_NOZZLE HOTEND=240
Z_TILT_ADJUST # Z_TILT_ADJUST
G28 G28
get_zoffset get_zoffset
[gcode_macro M4030] [gcode_macro M4030]
gcode: gcode:
REVERSE_HOMING
G91
G1 Z-30
G90
BED_MESH_CLEAR BED_MESH_CLEAR
SET_GCODE_OFFSET Z=0 MOVE=0 SET_GCODE_OFFSET Z=0 MOVE=0
G28 G28
@@ -590,7 +648,7 @@ gcode:
G0 E15 F400 G0 E15 F400
G4 P1000 G4 P1000
G92 E0 G92 E0
G1 E-80 F800 G1 E-90 F800
M400 M400
M118 Unload finish M118 Unload finish
@@ -603,7 +661,7 @@ gcode:
M118 Load finish M118 Load finish
[output_pin sound] [output_pin sound]
pin: U_1:PA13 pin: gpio8
value:0 value:0
[gcode_macro beep_on] [gcode_macro beep_on]

20
config/printer.cfg
View File

@@ -10,6 +10,8 @@
# modify: delete comments # modify: delete comments
# add time_update macro # add time_update macro
# [bed_mesh] 6,6 ->8,8 # [bed_mesh] 6,6 ->8,8
#V4.4.19 2024-4-16
# modify: add [chamber_fan chamber_fan]
[include timelapse.cfg] [include timelapse.cfg]
[include Adaptive_Mesh.cfg] [include Adaptive_Mesh.cfg]
[include gcode_macro.cfg] [include gcode_macro.cfg]
@@ -180,13 +182,17 @@ microsteps: 128
rotation_distance: 4 rotation_distance: 4
full_steps_per_rotation: 200 full_steps_per_rotation: 200
endstop_pin:probe:z_virtual_endstop #U_1:PC3 for Z-max endstop_pin:probe:z_virtual_endstop #U_1:PC3 for Z-max
endstop_pin_reverse:tmc2209_stepper_z:virtual_endstop
position_endstop:-0.2 position_endstop:-0.2
position_endstop_reverse:248
position_max:248 position_max:248
position_min: -6 position_min: -4
homing_speed: 8 homing_speed: 8
homing_speed_reverse: 8
second_homing_speed: 10 second_homing_speed: 10
homing_retract_dist: 5.0 homing_retract_dist: 5.0
homing_positive_dir:false homing_positive_dir:false
homing_positive_dir_reverse:true
step_pulse_duration:0.0000001 step_pulse_duration:0.0000001
[stepper_z1] [stepper_z1]
@@ -197,6 +203,7 @@ microsteps: 128
rotation_distance: 4 rotation_distance: 4
full_steps_per_rotation: 200 full_steps_per_rotation: 200
step_pulse_duration:0.0000001 step_pulse_duration:0.0000001
endstop_pin_reverse:tmc2209_stepper_z1:virtual_endstop
[z_tilt] [z_tilt]
z_positions: z_positions:
@@ -244,6 +251,8 @@ run_current: 0.6
#hold_current: 0.17 #hold_current: 0.17
interpolate: True interpolate: True
stealthchop_threshold: 9999999999 stealthchop_threshold: 9999999999
diag_pin:^U_1:PC12
driver_SGTHRS:140
[tmc2209 stepper_z1] [tmc2209 stepper_z1]
uart_pin:U_1: PB7 uart_pin:U_1: PB7
@@ -251,6 +260,8 @@ run_current: 0.6
#hold_current: 0.17 #hold_current: 0.17
interpolate: True interpolate: True
stealthchop_threshold: 9999999999 stealthchop_threshold: 9999999999
diag_pin:^U_1:PA13
driver_SGTHRS:140
[heater_bed] [heater_bed]
heater_pin: U_1:PB10 heater_pin: U_1:PB10
@@ -312,15 +323,16 @@ hardware_pwm: false
kick_start_time: 0.100 kick_start_time: 0.100
off_below: 0.0 off_below: 0.0
[heater_fan chamber_fan] [chamber_fan chamber_fan]
pin:U_1:PA4 pin:U_1:PA4
max_power: 1.0 max_power: 1.0
shutdown_speed: 0 shutdown_speed: 0
kick_start_time: 0.5 kick_start_time: 0.5
heater: chamber heater:chamber
heater_temp: 35
fan_speed: 1.0 fan_speed: 1.0
off_below: 0 off_below: 0
idle_timeout:60
idle_speed:1.0
[heater_fan hotend_fan] [heater_fan hotend_fan]
pin:gpio25 pin:gpio25