QIDITECH/QIDI_Q1_Pro
1
0
Fork 0
mirror of https://github.com/QIDITECH/QIDI_Q1_Pro.git synced 2026-01-30 15:38:43 +03:00
Code Issues Packages Projects Releases 7 Wiki Activity

V4.2.21 Update

Browse Source
This commit is contained in:
CChen616
2024-07-02 17:01:27 +08:00
parent d6048da6c1
commit 9b7c36f9a6
2 changed files with 12 additions and 5 deletions
Download Patch File Download Diff File Expand all files Collapse all files

15
config/gcode_macro.cfg
View File

@@ -3,9 +3,11 @@
# update: variable change M106 & M141 & M107 # update: variable change M106 & M141 & M107
# V4.4.16 2024-3-26 # V4.4.16 2024-3-26
# update: variable change [homing_override]->add M204 S10000 # update: variable change [homing_override]->add M204 S10000
# v4.4.20 2024-6-17 # V4.4.20 2024-6-17
# update: Z_DOUDONG CLEAR_NOZZLE get_zoffset rewrite # update: Z_DOUDONG CLEAR_NOZZLE get_zoffset rewrite
# move_subzoffset added # move_subzoffset added
# V4.4.21 2024-6-22
# update: Enable chamber exhaust fan by default when chamber temp not set
[gcode_macro test_zoffset] [gcode_macro test_zoffset]
gcode: gcode:
@@ -161,6 +163,9 @@ gcode:
{% set hotendtemp = params.HOTEND|int %} {% set hotendtemp = params.HOTEND|int %}
{% set chambertemp = params.CHAMBER|default(0)|int %} {% set chambertemp = params.CHAMBER|default(0)|int %}
set_zoffset set_zoffset
{% if chambertemp == 0 %}
M106 P3 S255
{% endif %}
M104 S0 M104 S0
M140 S{bedtemp} M140 S{bedtemp}
M141 S{chambertemp} M141 S{chambertemp}
@@ -231,6 +236,7 @@ gcode:
{% set RUN_CUR = driver_config.run_current %} {% set RUN_CUR = driver_config.run_current %}
{% set HOLD_CUR = driver_config.hold_current %} {% set HOLD_CUR = driver_config.hold_current %}
M204 S10000 M204 S10000
M220 S100
{% if params.X is defined %} {% if params.X is defined %}
SET_TMC_CURRENT STEPPER=stepper_x CURRENT={HOME_CUR * 0.7} SET_TMC_CURRENT STEPPER=stepper_x CURRENT={HOME_CUR * 0.7}
G28 X G28 X
@@ -646,7 +652,7 @@ gcode:
G90 G90
[gcode_macro M603] [gcode_macro M603]
description: filament unload description: unload filament
gcode: gcode:
M118 Heat up complete M118 Heat up complete
G92 E0 G92 E0
@@ -655,15 +661,16 @@ gcode:
G92 E0 G92 E0
G1 E-90 F800 G1 E-90 F800
M400 M400
M118 Unload finish M118 Filament unloaded
[gcode_macro M604] [gcode_macro M604]
description: load filament
gcode: gcode:
M118 Heat up complete M118 Heat up complete
M83 M83
G1 E80 F400 G1 E80 F400
M400 M400
M118 Load finish M118 Filament loaded
[output_pin sound] [output_pin sound]
pin: gpio8 pin: gpio8

2
config/printer.cfg
View File

@@ -367,7 +367,7 @@ max_power:1.0
shutdown_speed:1.0 shutdown_speed:1.0
cycle_time:0.01 cycle_time:0.01
fan_speed: 0.6 fan_speed: 0.6
stepper:stepper_z,stepper_z1 stepper:stepper_x,stepper_y
[fan_generic cooling_fan] [fan_generic cooling_fan]
pin:gpio2 pin:gpio2