mirror of
https://github.com/QIDITECH/QIDIStudio.git
synced 2026-01-30 16:38:41 +03:00
15910 lines
438 KiB
Plaintext
15910 lines
438 KiB
Plaintext
msgid ""
|
||
msgstr ""
|
||
"Project-Id-Version: QIDI Studio\n"
|
||
"Report-Msgid-Bugs-To: \n"
|
||
"POT-Creation-Date: 2024-05-31 17:44+0800\n"
|
||
"PO-Revision-Date: \n"
|
||
"Last-Translator: \n"
|
||
"Language-Team: \n"
|
||
"Language: en\n"
|
||
"MIME-Version: 1.0\n"
|
||
"Content-Type: text/plain; charset=UTF-8\n"
|
||
"Content-Transfer-Encoding: 8bit\n"
|
||
"Plural-Forms: nplurals=2; plural=(n==1) ? 0 : 1;\n"
|
||
"X-Generator: Poedit 3.4.4\n"
|
||
|
||
msgid "Don't slow down outer walls"
|
||
msgstr "Don't slow down outer walls"
|
||
|
||
msgid "If enabled, this setting will ensure external perimeters are not slowed down to meet the minimum layer time. "
|
||
"This is particularly helpful in the below scenarios:\n\n "
|
||
"1. To avoid changes in shine when printing glossy filaments \n"
|
||
"2. To avoid changes in external wall speed which may create slight wall artefacts that appear like z banding \n"
|
||
"3. To avoid printing at speeds which cause VFAs (fine artefacts) on the external walls\n\n"
|
||
msgstr "If enabled, this setting will ensure external perimeters are not slowed down to meet the minimum layer time. "
|
||
"This is particularly helpful in the below scenarios:\n\n "
|
||
"1. To avoid changes in shine when printing glossy filaments \n"
|
||
"2. To avoid changes in external wall speed which may create slight wall artefacts that appear like z banding \n"
|
||
"3. To avoid printing at speeds which cause VFAs (fine artefacts) on the external walls\n\n"
|
||
|
||
msgid "Click here if you failed to send the print job"
|
||
msgstr "Click here if you failed to send the print job"
|
||
|
||
msgid "Login/Register"
|
||
msgstr "Login/Register"
|
||
|
||
msgid "Local"
|
||
msgstr "Local"
|
||
|
||
msgid "Printer name \"%1%\" already exists."
|
||
msgstr "Printer name \"%1%\" already exists."
|
||
|
||
msgid "Connection to Moonraker works correctly."
|
||
msgstr "Connection to Moonraker works correctly."
|
||
|
||
msgid "The host or IP or URL cannot be empty."
|
||
msgstr "The host or IP or URL cannot be empty."
|
||
|
||
msgid "A device with the same host (IP or URL) already exists, please re-enter."
|
||
msgstr "A device with the same host (IP or URL) already exists, please re-enter."
|
||
|
||
msgid "Machine Name"
|
||
msgstr "Machine Name"
|
||
|
||
msgid "Choice your physical printer preset"
|
||
msgstr "Choice your physical printer preset"
|
||
|
||
msgid "Are you sure you want to delete \"%1%\" printer?"
|
||
msgstr "Are you sure you want to delete \"%1%\" printer?"
|
||
|
||
msgid "Are you sure you want to delete "
|
||
msgstr "Are you sure you want to delete "
|
||
|
||
msgid "printer?"
|
||
msgstr "printer?"
|
||
|
||
msgid "Delete Physical Printer"
|
||
msgstr "Delete Physical Printer"
|
||
|
||
msgid "Unseal Fan speed"
|
||
msgstr "Unseal Fan speed"
|
||
|
||
msgid "Speed of auxiliary part cooling fan under unseal. Auxiliary fan will run at this speed during printing except the first several layers "
|
||
"which are defined by no cooling layers"
|
||
msgstr "Speed of auxiliary part cooling fan under unseal. Auxiliary fan will run at this speed during printing except the first several layers "
|
||
"which are defined by no cooling layers"
|
||
|
||
msgid "Resonance avoidance"
|
||
msgstr "Resonance avoidance"
|
||
|
||
msgid "By reducing the speed of the outer wall to avoid the resonance zone of the printer, ringing on the surface of the model are avoided.\n"
|
||
"Please turn this option off when testing ringing."
|
||
msgstr "By reducing the speed of the outer wall to avoid the resonance zone of the printer, ringing on the surface of the model are avoided.\n"
|
||
"Please turn this option off when testing ringing."
|
||
|
||
msgid "G-code thumbnails"
|
||
msgstr "G-code thumbnails"
|
||
|
||
msgid "Picture sizes to be stored into a .gcode and .sl1 / .sl1s files, in the following format: \"XxY, XxY, ...\""
|
||
msgstr "Picture sizes to be stored into a .gcode and .sl1 / .sl1s files, in the following format: \"XxY, XxY, ...\""
|
||
|
||
msgid "Format of G-code thumbnails"
|
||
msgstr "Format of G-code thumbnails"
|
||
|
||
msgid "Format of G-code thumbnails: PNG for best quality, JPG for smallest size"
|
||
msgstr "Format of G-code thumbnails: PNG for best quality, JPG for smallest size"
|
||
|
||
msgid "Supports Painting"
|
||
msgstr "Supports Painting"
|
||
|
||
msgid "Please select single object."
|
||
msgstr "Please select single object."
|
||
|
||
msgid "Alt + Mouse wheel"
|
||
msgstr "Alt + Mouse wheel"
|
||
|
||
msgid "Section view"
|
||
msgstr "Section view"
|
||
|
||
msgid "Reset direction"
|
||
msgstr "Reset direction"
|
||
|
||
msgid "Ctrl + Mouse wheel"
|
||
msgstr "Ctrl + Mouse wheel"
|
||
|
||
msgid "Pen size"
|
||
msgstr "Pen size"
|
||
|
||
msgid "Left mouse button"
|
||
msgstr "Left mouse button"
|
||
|
||
msgid "Enforce supports"
|
||
msgstr "Enforce supports"
|
||
|
||
msgid "Right mouse button"
|
||
msgstr "Right mouse button"
|
||
|
||
msgid "Block supports"
|
||
msgstr "Block supports"
|
||
|
||
msgid "Shift + Left mouse button"
|
||
msgstr "Shift + Left mouse button"
|
||
|
||
msgid "Erase"
|
||
msgstr "Erase"
|
||
|
||
msgid "Erase all painting"
|
||
msgstr "Erase all painting"
|
||
|
||
msgid "Highlight overhang areas"
|
||
msgstr "Highlight overhang areas"
|
||
|
||
msgid "Gap fill"
|
||
msgstr "Gap fill"
|
||
|
||
msgid "Perform"
|
||
msgstr "Apply"
|
||
|
||
msgid "Gap area"
|
||
msgstr "Gap area"
|
||
|
||
msgid "Tool type"
|
||
msgstr "Tool type"
|
||
|
||
msgid "Smart fill angle"
|
||
msgstr "Smart fill angle"
|
||
|
||
msgid "On overhangs only"
|
||
msgstr "On overhangs only"
|
||
|
||
msgid "Auto support threshold angle: "
|
||
msgstr "Auto support threshold angle: "
|
||
|
||
msgid "Circle"
|
||
msgstr "Circle"
|
||
|
||
msgid "Sphere"
|
||
msgstr "Sphere"
|
||
|
||
msgid "Fill"
|
||
msgstr "Fill"
|
||
|
||
msgid "Gap Fill"
|
||
msgstr "Gap Fill"
|
||
|
||
#, boost-format
|
||
msgid "Allows painting only on facets selected by: \"%1%\""
|
||
msgstr "Allows painting only on facets selected by: \"%1%\""
|
||
|
||
msgid "Highlight faces according to overhang angle."
|
||
msgstr "Highlight faces according to overhang angle."
|
||
|
||
msgid "No auto support"
|
||
msgstr "No auto support"
|
||
|
||
msgid "Support Generated"
|
||
msgstr "Support Generated"
|
||
|
||
msgid "Lay on face"
|
||
msgstr "Lay on Face"
|
||
|
||
#, boost-format
|
||
msgid ""
|
||
"Filament count exceeds the maximum number that painting tool supports. only "
|
||
"the first %1% filaments will be available in painting tool."
|
||
msgstr ""
|
||
"Filament count exceeds the maximum number that painting tool supports. Only "
|
||
"the first %1% filaments will be available in painting tool."
|
||
|
||
msgid "Color Painting"
|
||
msgstr "Color Painting"
|
||
|
||
msgid "Pen shape"
|
||
msgstr "Pen shape"
|
||
|
||
msgid "Paint"
|
||
msgstr "Paint"
|
||
|
||
msgid "Key 1~9"
|
||
msgstr "Key 1~9"
|
||
|
||
msgid "Choose filament"
|
||
msgstr "Choose filament"
|
||
|
||
msgid "Edge detection"
|
||
msgstr "Edge detection"
|
||
|
||
msgid "Triangles"
|
||
msgstr "Triangles"
|
||
|
||
msgid "Filaments"
|
||
msgstr "Filaments"
|
||
|
||
msgid "Brush"
|
||
msgstr "Brush"
|
||
|
||
msgid "Smart fill"
|
||
msgstr "Smart fill"
|
||
|
||
msgid "Bucket fill"
|
||
msgstr "Bucket fill"
|
||
|
||
msgid "Height range"
|
||
msgstr "Height range"
|
||
|
||
msgid "Alt + Shift + Enter"
|
||
msgstr "Alt + Shift + Enter"
|
||
|
||
msgid "Toggle Wireframe"
|
||
msgstr "Toggle Wireframe"
|
||
|
||
msgid "Rotate horizontally"
|
||
msgstr "Rotate horizontally"
|
||
|
||
msgid "Shortcut Key "
|
||
msgstr "Shortcut Key "
|
||
|
||
msgid "Triangle"
|
||
msgstr "Triangle"
|
||
|
||
msgid "Height Range"
|
||
msgstr "Height Range"
|
||
|
||
msgid "Vertical"
|
||
msgstr "Vertical"
|
||
|
||
msgid "Horizontal"
|
||
msgstr "Horizontal"
|
||
|
||
msgid "View: keep horizontal"
|
||
msgstr "View: keep horizontal"
|
||
|
||
msgid "Remove painted color"
|
||
msgstr "Remove painted color"
|
||
|
||
#, boost-format
|
||
msgid "Painted using: Filament %1%"
|
||
msgstr "Painted using: Filament %1%"
|
||
|
||
msgid "Move"
|
||
msgstr "Move"
|
||
|
||
msgid "Please select at least one object."
|
||
msgstr "Please select at least one object."
|
||
|
||
msgid "Rotate"
|
||
msgstr "Rotate"
|
||
|
||
msgid "Optimize orientation"
|
||
msgstr "Optimize orientation"
|
||
|
||
msgid "Apply"
|
||
msgstr "Apply"
|
||
|
||
msgid "Scale"
|
||
msgstr "Scale"
|
||
|
||
msgid "Error: Please close all toolbar menus first"
|
||
msgstr "Error: Please close all toolbar menus first"
|
||
|
||
msgid "Tool-Move"
|
||
msgstr "Tool-Move"
|
||
|
||
msgid "Tool-Scale"
|
||
msgstr "Tool-Scale"
|
||
|
||
msgid "Tool-Rotate"
|
||
msgstr "Tool-Rotate"
|
||
|
||
msgid "Tool-Lay on Face"
|
||
msgstr "Tool-Lay on Face"
|
||
|
||
msgid "Bottom:"
|
||
msgstr "Bottom:"
|
||
|
||
msgid "in"
|
||
msgstr "in"
|
||
|
||
msgid "mm"
|
||
msgstr "mm"
|
||
|
||
msgid "Position"
|
||
msgstr "Position"
|
||
|
||
msgid "Rotation"
|
||
msgstr "Rotation"
|
||
|
||
msgid "Scale ratios"
|
||
msgstr "Scale ratios"
|
||
|
||
msgid "Object Operations"
|
||
msgstr "Object Operations"
|
||
|
||
msgid "Rotate (relative)"
|
||
msgstr "Rotate (relative)"
|
||
|
||
msgid "Volume Operations"
|
||
msgstr "Volume Operations"
|
||
|
||
msgid "Translate"
|
||
msgstr "Translate"
|
||
|
||
msgid "Group Operations"
|
||
msgstr "Group Operations"
|
||
|
||
msgid "Set Position"
|
||
msgstr "Set Position"
|
||
|
||
msgid "Set Orientation"
|
||
msgstr "Set Orientation"
|
||
|
||
msgid "Set Scale"
|
||
msgstr "Set Scale"
|
||
|
||
msgid "Reset Position"
|
||
msgstr "Reset Position"
|
||
|
||
msgid "Reset Rotation"
|
||
msgstr "Reset Rotation"
|
||
|
||
msgid "World coordinates"
|
||
msgstr "World coordinates"
|
||
|
||
msgid "°"
|
||
msgstr "°"
|
||
|
||
msgid "Size"
|
||
msgstr "Size"
|
||
|
||
msgid "%"
|
||
msgstr "%"
|
||
|
||
msgid "uniform scale"
|
||
msgstr "uniform scale"
|
||
|
||
msgid "Part"
|
||
msgstr "Part"
|
||
|
||
msgid "Object"
|
||
msgstr "Object"
|
||
|
||
msgid "Drag to move the cut plane"
|
||
msgstr "Drag to move the cut plane"
|
||
|
||
msgid ""
|
||
"Drag to move the cut plane\n"
|
||
"Right-click a part to assign it to the other side"
|
||
msgstr ""
|
||
"Drag to move the cut plane\n"
|
||
"Right-click a part to assign it to the other side"
|
||
|
||
msgid "Left click"
|
||
msgstr "Left click"
|
||
|
||
msgid "Add connector"
|
||
msgstr "Add connector"
|
||
|
||
msgid "Right click"
|
||
msgstr "Right click"
|
||
|
||
msgid "Remove connector"
|
||
msgstr "Remove connector"
|
||
|
||
msgid "Drag"
|
||
msgstr "Drag"
|
||
|
||
msgid "Move connector"
|
||
msgstr "Move connector"
|
||
|
||
msgid "Add connector to selection"
|
||
msgstr "Add connector to selection"
|
||
|
||
msgid "Remove connector from selection"
|
||
msgstr "Remove connector from selection"
|
||
|
||
msgid "Select all connectors"
|
||
msgstr "Select all connectors"
|
||
|
||
msgid "Left drag"
|
||
msgstr "Left drag"
|
||
|
||
msgid "Plot cut plane"
|
||
msgstr "Plot cut plane"
|
||
|
||
msgid "right click"
|
||
msgstr "right click"
|
||
|
||
msgid "Assign the part to the other side"
|
||
msgstr "Assign the part to the other side"
|
||
|
||
msgid "Cut"
|
||
msgstr "Cut"
|
||
|
||
msgid "non-manifold edges be caused by cut tool, do you want to fix it now?"
|
||
msgstr "Non-manifold edges be caused by cut tool: do you want to fix now?"
|
||
|
||
msgid "Repairing model object"
|
||
msgstr "Repairing model object"
|
||
|
||
msgid "Connector"
|
||
msgstr "Connector"
|
||
|
||
msgid "Planar"
|
||
msgstr "Planar"
|
||
|
||
msgid "Dovetail"
|
||
msgstr "Dovetail"
|
||
|
||
msgid "Mode"
|
||
msgstr "Mode"
|
||
|
||
msgid "Movement:"
|
||
msgstr "Movement:"
|
||
|
||
msgid "Groove Angle"
|
||
msgstr "Groove Angle"
|
||
|
||
msgid "Movement"
|
||
msgstr "Movement"
|
||
|
||
msgid "Height"
|
||
msgstr "Height"
|
||
|
||
msgid "Edit connectors"
|
||
msgstr "Edit connectors"
|
||
|
||
msgid "Add connectors"
|
||
msgstr "Add connectors"
|
||
|
||
msgid "Groove"
|
||
msgstr "Groove"
|
||
|
||
msgid "Depth"
|
||
msgstr "Depth"
|
||
|
||
msgid "Width"
|
||
msgstr "Width"
|
||
|
||
msgid "Flap Angle"
|
||
msgstr "Flap Angle"
|
||
|
||
msgid "Keep orientation"
|
||
msgstr "Keep orientation"
|
||
|
||
msgid "Place on cut"
|
||
msgstr "Place on cut"
|
||
|
||
msgid "Flip"
|
||
msgstr "Flip"
|
||
|
||
msgid "After cut"
|
||
msgstr "After cut"
|
||
|
||
msgid "Cut to parts"
|
||
msgstr "Cut to parts"
|
||
|
||
msgid "Auto Segment"
|
||
msgstr "Auto Segment"
|
||
|
||
msgid "Perform cut"
|
||
msgstr "Perform cut"
|
||
|
||
msgid "Reset"
|
||
msgstr "Reset"
|
||
|
||
msgid "Connectors"
|
||
msgstr "Connectors"
|
||
|
||
msgid "Type"
|
||
msgstr "Type"
|
||
|
||
msgid "Style"
|
||
msgstr "Style"
|
||
|
||
msgid "Shape"
|
||
msgstr "Shape"
|
||
|
||
msgid "Depth ratio"
|
||
msgstr "Depth ratio"
|
||
|
||
msgid "Remove connectors"
|
||
msgstr "Remove connectors"
|
||
|
||
msgid "Prizm"
|
||
msgstr "Prizm"
|
||
|
||
msgid "Frustum"
|
||
msgstr "Frustum"
|
||
|
||
msgid "Square"
|
||
msgstr "Square"
|
||
|
||
msgid "Hexagon"
|
||
msgstr "Hexagon"
|
||
|
||
msgid "Snap global parameters"
|
||
msgstr "Snap global parameters"
|
||
|
||
msgid "Bulge"
|
||
msgstr "Bulge"
|
||
|
||
msgid "Gap"
|
||
msgstr "Gap"
|
||
|
||
msgid "Confirm connectors"
|
||
msgstr "Confirm connectors"
|
||
|
||
msgid "Cancel"
|
||
msgstr "Cancel"
|
||
|
||
msgid "Warning"
|
||
msgstr "Warning"
|
||
|
||
msgid "Invalid connectors detected"
|
||
msgstr "Invalid connectors detected"
|
||
|
||
msgid "connector is out of cut contour"
|
||
msgstr "connector is out of cut contour"
|
||
|
||
msgid "connectors are out of cut contour"
|
||
msgstr "connectors are out of cut contour"
|
||
|
||
msgid "connector is out of object"
|
||
msgstr "connector is out of object"
|
||
|
||
msgid "connectors is out of object"
|
||
msgstr "Connectors must be on object surface."
|
||
|
||
msgid "Some connectors are overlapped"
|
||
msgstr "Some connectors are overlapped"
|
||
|
||
msgid ""
|
||
"Invalid state. \n"
|
||
"No one part is selected to keep after cut"
|
||
msgstr ""
|
||
"Invalid state. \n"
|
||
"No one part is selected to keep after cut"
|
||
|
||
msgid "Plug"
|
||
msgstr "Plug"
|
||
|
||
msgid "Dowel"
|
||
msgstr "Dowel"
|
||
|
||
msgid "Snap"
|
||
msgstr "Snap"
|
||
|
||
msgid "Tolerance"
|
||
msgstr "Tolerance"
|
||
|
||
msgid "Mesh name"
|
||
msgstr "Mesh name"
|
||
|
||
msgid "Detail level"
|
||
msgstr "Detail level"
|
||
|
||
msgid "Decimate ratio"
|
||
msgstr "Decimate ratio"
|
||
|
||
#, boost-format
|
||
msgid ""
|
||
"Processing model '%1%' with more than 1M triangles could be slow. It is "
|
||
"highly recommended to simplify the model."
|
||
msgstr ""
|
||
"Processing model '%1%' with more than 1M triangles could be slow. It is "
|
||
"highly recommended to simplify the model."
|
||
|
||
msgid "Simplify model"
|
||
msgstr "Simplify model"
|
||
|
||
msgid "Simplify"
|
||
msgstr "Simplify"
|
||
|
||
msgid "Simplification is currently only allowed when a single part is selected"
|
||
msgstr ""
|
||
"Simplification is currently only allowed when a single part is selected"
|
||
|
||
msgid "Error"
|
||
msgstr "Error"
|
||
|
||
msgid "Extra high"
|
||
msgstr "Extra high"
|
||
|
||
msgid "High"
|
||
msgstr "High"
|
||
|
||
msgid "Medium"
|
||
msgstr "Medium"
|
||
|
||
msgid "Low"
|
||
msgstr "Low"
|
||
|
||
msgid "Extra low"
|
||
msgstr "Extra low"
|
||
|
||
#, c-format, boost-format
|
||
msgid "%d triangles"
|
||
msgstr "%d triangles"
|
||
|
||
msgid "Show wireframe"
|
||
msgstr "Show wireframe"
|
||
|
||
#, boost-format
|
||
msgid "%1%"
|
||
msgstr "%1%"
|
||
|
||
msgid "Can't apply when process preview."
|
||
msgstr "Can't apply when processing preview"
|
||
|
||
msgid "Operation already cancelling. Please wait few seconds."
|
||
msgstr "Operation already cancelling. Please wait few seconds."
|
||
|
||
msgid "Face recognition"
|
||
msgstr "Face recognition"
|
||
|
||
msgid "Perform Recognition"
|
||
msgstr "Perform Recognition"
|
||
|
||
msgid "Vertex"
|
||
msgstr "Vertex"
|
||
|
||
msgid "Edge"
|
||
msgstr "Edge"
|
||
|
||
msgid "Plane"
|
||
msgstr "Plane"
|
||
|
||
msgid "Point on edge"
|
||
msgstr "Point on edge"
|
||
|
||
msgid "Point on circle"
|
||
msgstr "Point on circle"
|
||
|
||
msgid "Point on plane"
|
||
msgstr "Point on plane"
|
||
|
||
msgid "Center of edge"
|
||
msgstr "Center of edge"
|
||
|
||
msgid "Center of circle"
|
||
msgstr "Center of circle"
|
||
|
||
msgid "Select feature"
|
||
msgstr "Select feature"
|
||
|
||
msgid "Select point"
|
||
msgstr "Select point"
|
||
|
||
msgid "Delete"
|
||
msgstr "Delete"
|
||
|
||
msgid "Restart selection"
|
||
msgstr "Restart selection"
|
||
|
||
msgid "Esc"
|
||
msgstr "Esc"
|
||
|
||
msgid "Cancel a feature until exit"
|
||
msgstr "Cancel a feature until exit"
|
||
|
||
msgid "Measure"
|
||
msgstr "Measure"
|
||
|
||
msgid ""
|
||
"Please confirm explosion ratio = 1,and please select at least one object"
|
||
msgstr ""
|
||
"Please confirm explosion ratio = 1, and please select at least one object"
|
||
|
||
msgid "Edit to scale"
|
||
msgstr "Edit to scale"
|
||
|
||
msgctxt "Verb"
|
||
msgid "Scale all"
|
||
msgstr "Scale all"
|
||
|
||
msgid "None"
|
||
msgstr "None"
|
||
|
||
msgid "Diameter"
|
||
msgstr "Diameter"
|
||
|
||
msgid "Length"
|
||
msgstr "Length"
|
||
|
||
msgid "Selection"
|
||
msgstr "Selection"
|
||
|
||
msgid " (Moving)"
|
||
msgstr " (Moving)"
|
||
|
||
msgid ""
|
||
"Select 2 faces on objects and \n"
|
||
" make objects assemble together."
|
||
msgstr ""
|
||
"Select 2 faces on objects and \n"
|
||
" make objects assemble together."
|
||
|
||
msgid ""
|
||
"Select 2 points or circles on objects and \n"
|
||
" specify distance between them."
|
||
msgstr ""
|
||
"Select 2 points or circles on objects and \n"
|
||
" specify distance between them."
|
||
|
||
msgid "Face"
|
||
msgstr "Face"
|
||
|
||
msgid " (Fixed)"
|
||
msgstr " (Fixed)"
|
||
|
||
msgid "Point"
|
||
msgstr "Point"
|
||
|
||
msgid ""
|
||
"Feature 1 has been reset, \n"
|
||
"feature 2 has been feature 1"
|
||
msgstr ""
|
||
"Feature 1 has been reset, \n"
|
||
"feature 2 has been feature 1"
|
||
|
||
msgid "Warning:please select Plane's feature."
|
||
msgstr "Warning: please select Plane's feature."
|
||
|
||
msgid "Warning:please select Point's or Circle's feature."
|
||
msgstr "Warning: please select Point's or Circle's feature."
|
||
|
||
msgid "Warning:please select two different mesh."
|
||
msgstr "Warning: please select two different meshes."
|
||
|
||
msgid "Copy to clipboard"
|
||
msgstr "Copy to clipboard"
|
||
|
||
msgid "Angle"
|
||
msgstr "Angle"
|
||
|
||
msgid "Perpendicular distance"
|
||
msgstr "Perpendicular distance"
|
||
|
||
msgid "Distance"
|
||
msgstr "Distance"
|
||
|
||
msgid "Direct distance"
|
||
msgstr "Direct distance"
|
||
|
||
msgid "Distance XYZ"
|
||
msgstr "Distance XYZ"
|
||
|
||
msgid "Parallel"
|
||
msgstr "Parallel"
|
||
|
||
msgid "Center coincidence"
|
||
msgstr "Center coincidence"
|
||
|
||
msgid "Featue 1"
|
||
msgstr "Feature 1"
|
||
|
||
msgid "Reverse rotation"
|
||
msgstr "Reverse rotation"
|
||
|
||
msgid "Rotate around center:"
|
||
msgstr "Rotate around center:"
|
||
|
||
msgid "Parallel_distance:"
|
||
msgstr "Parallel_distance:"
|
||
|
||
msgid "Flip by Face 2"
|
||
msgstr "Flip by Face 2"
|
||
|
||
msgid "Assemble"
|
||
msgstr "Assemble"
|
||
|
||
msgid "Please confirm explosion ratio = 1 and select at least two volumes."
|
||
msgstr "Please confirm explosion ratio = 1 and select at least two volumes."
|
||
|
||
msgid "Please select at least two volumes."
|
||
msgstr "Please select at least two volumes."
|
||
|
||
msgid "(Moving)"
|
||
msgstr "(Moving)"
|
||
|
||
msgid "Point and point assembly"
|
||
msgstr "Point and point assembly"
|
||
|
||
msgid ""
|
||
"It is recommended to assemble the objects first,\n"
|
||
"because the objects is restriced to bed \n"
|
||
"and only parts can be lifted."
|
||
msgstr ""
|
||
|
||
msgid "Face and face assembly"
|
||
msgstr "Face and face assembly"
|
||
|
||
msgid "Brush size"
|
||
msgstr "Brush size"
|
||
|
||
msgid "Brush shape"
|
||
msgstr "Brush shape"
|
||
|
||
msgid "Enforce seam"
|
||
msgstr "Enforce seam"
|
||
|
||
msgid "Block seam"
|
||
msgstr "Block seam"
|
||
|
||
msgid "Seam painting"
|
||
msgstr "Seam painting"
|
||
|
||
msgid "Remove selection"
|
||
msgstr "Remove selection"
|
||
|
||
msgid "Shift + Mouse move up or down"
|
||
msgstr "Shift + Mouse move up or down"
|
||
|
||
msgid "Rotate text"
|
||
msgstr "Rotate text"
|
||
|
||
msgid "Text shape"
|
||
msgstr "Text shape"
|
||
|
||
msgid "Font"
|
||
msgstr "Font"
|
||
|
||
msgid "Thickness"
|
||
msgstr "Thickness"
|
||
|
||
msgid "Input text"
|
||
msgstr "Input text"
|
||
|
||
msgid "Embeded"
|
||
msgstr "Embeded"
|
||
|
||
msgid "Text Gap"
|
||
msgstr "Text Gap"
|
||
|
||
msgid ""
|
||
"Embeded\r\n"
|
||
"depth"
|
||
msgstr ""
|
||
"Embedded\n"
|
||
"depth"
|
||
|
||
msgid "Surface"
|
||
msgstr "Surface"
|
||
|
||
msgid "Horizontal text"
|
||
msgstr "Horizontal text"
|
||
|
||
msgid "Ctrl+"
|
||
msgstr "Ctrl+"
|
||
|
||
msgid "Notice"
|
||
msgstr "Notice"
|
||
|
||
msgid "Undefined"
|
||
msgstr "Undefined"
|
||
|
||
#, boost-format
|
||
msgid "%1% was replaced with %2%"
|
||
msgstr "%1% was replaced with %2%"
|
||
|
||
msgid "The configuration may be generated by a newer version of QIDIStudio."
|
||
msgstr "The configuration may be generated by a newer version of QIDIStudio."
|
||
|
||
msgid "Some values have been replaced. Please check them:"
|
||
msgstr "Some values have been replaced. Please check them:"
|
||
|
||
msgid "Process"
|
||
msgstr "Process"
|
||
|
||
msgid "Filament"
|
||
msgstr "Filament"
|
||
|
||
msgid "Machine"
|
||
msgstr "Machine"
|
||
|
||
msgid "Configuration package was loaded, but some values were not recognized."
|
||
msgstr "Configuration package was loaded, but some values were not recognized."
|
||
|
||
#, boost-format
|
||
msgid ""
|
||
"Configuration file \"%1%\" was loaded, but some values were not recognized."
|
||
msgstr ""
|
||
"Configuration file \"%1%\" was loaded, but some values were not recognized."
|
||
|
||
msgid "Internal Version"
|
||
msgstr "Internal Version"
|
||
|
||
msgid "Beta Version"
|
||
msgstr "Beta Version"
|
||
|
||
msgid "V"
|
||
msgstr "V"
|
||
|
||
msgid "Version"
|
||
msgstr "Version"
|
||
|
||
msgid ""
|
||
"QIDIStudio will terminate because of running out of memory.It may be a bug. "
|
||
"It will be appreciated if you report the issue to our team."
|
||
msgstr ""
|
||
"QIDIStudio will terminate because of running out of memory. It may be a bug. "
|
||
"We would greatly appreciate it if you report the issue to our team."
|
||
|
||
msgid "Fatal error"
|
||
msgstr "Fatal error"
|
||
|
||
msgid ""
|
||
"QIDIStudio will terminate because of a localization error. It will be "
|
||
"appreciated if you report the specific scenario this issue happened."
|
||
msgstr ""
|
||
"QIDIStudio will terminate because of a localization error. We would "
|
||
"appreciate it if you report the specific scenario in which this issue "
|
||
"happened."
|
||
|
||
msgid "Critical error"
|
||
msgstr "Critical error"
|
||
|
||
#, boost-format
|
||
msgid "QIDIStudio got an unhandled exception: %1%"
|
||
msgstr "QIDIStudio got an unhandled exception: %1%"
|
||
|
||
msgid "Untitled"
|
||
msgstr "Untitled"
|
||
|
||
msgid "Downloading QIDI Network Plug-in"
|
||
msgstr "Downloading QIDI Network Plug-in"
|
||
|
||
msgid "Login information expired. Please login again."
|
||
msgstr "Login information expired. Please login again."
|
||
|
||
msgid "Incorrect password"
|
||
msgstr "Incorrect password"
|
||
|
||
#, c-format, boost-format
|
||
msgid "Connect %s failed! [SN:%s, code=%s]"
|
||
msgstr "Connect %s failed! [SN:%s, code=%s]"
|
||
|
||
msgid ""
|
||
"QIDIStudio configuration file may be corrupted and is not able to be parsed."
|
||
"Please delete the file and try again."
|
||
msgstr ""
|
||
"QIDIStudio configuration file is not able to be parsed and may be corrupted. "
|
||
"Please delete the file and try again."
|
||
|
||
#, c-format, boost-format
|
||
msgid ""
|
||
"%s\n"
|
||
"Do you want to continue?"
|
||
msgstr ""
|
||
"%s\n"
|
||
"Do you want to continue?"
|
||
|
||
msgid "Remember my choice"
|
||
msgstr "Remember my choice"
|
||
|
||
msgid "Loading configuration"
|
||
msgstr "Loading configuration"
|
||
|
||
#, c-format, boost-format
|
||
msgid "Click to download new version in default browser: %s"
|
||
msgstr "Click to download new version in default browser: %s"
|
||
|
||
msgid "The QIDI Studio needs an upgrade"
|
||
msgstr "QIDI Studio needs an update"
|
||
|
||
msgid "This is the newest version."
|
||
msgstr "This is the newest version."
|
||
|
||
msgid "Info"
|
||
msgstr "Info"
|
||
|
||
msgid "Rebuild"
|
||
msgstr "Rebuild"
|
||
|
||
msgid "Loading current presets"
|
||
msgstr "Loading current presets"
|
||
|
||
msgid "Loading a mode view"
|
||
msgstr "Loading a mode view"
|
||
|
||
msgid "Choose one file (3mf):"
|
||
msgstr "Choose one file (3mf):"
|
||
|
||
msgid "Choose one or more files (3mf/step/stl/svg/obj/amf/usd*/abc/ply):"
|
||
msgstr "Choose one or more files (3mf/step/stl/svg/obj/amf/usd*/abc/ply):"
|
||
|
||
msgid "Choose one or more files (3mf/step/stl/svg/obj/amf):"
|
||
msgstr "Choose one or more files (3mf/step/stl/svg/obj/amf):"
|
||
|
||
msgid "Choose one file (gcode/.gco/.g/.ngc/ngc):"
|
||
msgstr "Choose one file (gcode/.gco/.g/.ngc/ngc):"
|
||
|
||
msgid "Some presets are modified."
|
||
msgstr "Some presets are modified."
|
||
|
||
msgid ""
|
||
"You can keep the modified presets for the new project, discard or save "
|
||
"changes as new presets."
|
||
msgstr ""
|
||
"You can keep the modified presets for the new project, discard or save "
|
||
"changes as new presets."
|
||
|
||
msgid "User logged out"
|
||
msgstr "User logged out"
|
||
|
||
msgid "new or open project file is not allowed during the slicing process!"
|
||
msgstr "new or open project file is not allowed during the slicing process!"
|
||
|
||
msgid "Open Project"
|
||
msgstr "Open Project"
|
||
|
||
msgid ""
|
||
"The QIDI Studio version is too old to enable cloud service. Please download "
|
||
"the latest version from QIDI Lab website."
|
||
msgstr ""
|
||
"The QIDI Studio version is too old to enable cloud service. Please download "
|
||
"the latest version from QIDI Lab's website."
|
||
|
||
msgid "Privacy Policy Update"
|
||
msgstr "Privacy Policy Update"
|
||
|
||
msgid ""
|
||
"The number of user presets cached in the cloud has exceeded the upper limit, "
|
||
"newly created user presets can only be used locally."
|
||
msgstr ""
|
||
"The number of user presets cached in the cloud has exceeded the upper limit, "
|
||
"newly created user presets can only be used locally."
|
||
|
||
msgid "Sync user presets"
|
||
msgstr "Sync user presets"
|
||
|
||
msgid "Loading"
|
||
msgstr "Loading"
|
||
|
||
msgid "Loading user preset"
|
||
msgstr "Loading user preset"
|
||
|
||
msgid "Switching application language"
|
||
msgstr "Switching application language"
|
||
|
||
msgid "Select the language"
|
||
msgstr "Select the language"
|
||
|
||
msgid "Language"
|
||
msgstr "Language"
|
||
|
||
msgid "*"
|
||
msgstr "*"
|
||
|
||
msgid "The uploads are still ongoing"
|
||
msgstr "The uploads are still ongoing"
|
||
|
||
msgid "Stop them and continue anyway?"
|
||
msgstr "Stop them and continue anyway?"
|
||
|
||
msgid "Ongoing uploads"
|
||
msgstr "Ongoing uploads"
|
||
|
||
msgid "Select a G-code file:"
|
||
msgstr "Select a G-code file:"
|
||
|
||
msgid "Import File"
|
||
msgstr "Import File"
|
||
|
||
msgid "Choose files"
|
||
msgstr "Choose files"
|
||
|
||
msgid "New Folder"
|
||
msgstr "New Folder"
|
||
|
||
msgid "Open"
|
||
msgstr "Open"
|
||
|
||
msgid "Rename"
|
||
msgstr "Rename"
|
||
|
||
msgid "QIDI Studio GUI initialization failed"
|
||
msgstr "QIDI Studio GUI initialization failed"
|
||
|
||
#, boost-format
|
||
msgid "Fatal error, exception caught: %1%"
|
||
msgstr "Fatal error; exception caught: %1%"
|
||
|
||
msgid "Quality"
|
||
msgstr "Quality"
|
||
|
||
msgid "Shell"
|
||
msgstr "Shell"
|
||
|
||
msgid "Infill"
|
||
msgstr "Infill"
|
||
|
||
msgid "Support"
|
||
msgstr "Support"
|
||
|
||
msgid "Flush options"
|
||
msgstr "Flush options"
|
||
|
||
msgid "Speed"
|
||
msgstr "Speed"
|
||
|
||
msgid "Strength"
|
||
msgstr "Strength"
|
||
|
||
msgid "Ironing"
|
||
msgstr "Ironing"
|
||
|
||
msgid "Fuzzy Skin"
|
||
msgstr "Fuzzy Skin"
|
||
|
||
msgid "Extruders"
|
||
msgstr "Extruders"
|
||
|
||
msgid "Extrusion Width"
|
||
msgstr "Extrusion Width"
|
||
|
||
msgid "Wipe options"
|
||
msgstr "Wipe options"
|
||
|
||
msgid "Bed adhension"
|
||
msgstr "Bed adhesion"
|
||
|
||
msgid "Advanced"
|
||
msgstr "Advanced"
|
||
|
||
msgid "Add part"
|
||
msgstr "Add part"
|
||
|
||
msgid "Add negative part"
|
||
msgstr "Add negative part"
|
||
|
||
msgid "Add modifier"
|
||
msgstr "Add modifier"
|
||
|
||
msgid "Add support blocker"
|
||
msgstr "Add support blocker"
|
||
|
||
msgid "Add support enforcer"
|
||
msgstr "Add support enforcer"
|
||
|
||
msgid "Select settings"
|
||
msgstr "Select settings"
|
||
|
||
msgid "Hide"
|
||
msgstr "Hide"
|
||
|
||
msgid "Show"
|
||
msgstr "Show"
|
||
|
||
msgid "Del"
|
||
msgstr "Del"
|
||
|
||
msgid "Delete the selected object"
|
||
msgstr "Delete the selected object"
|
||
|
||
msgid "Edit Text"
|
||
msgstr "Edit Text"
|
||
|
||
msgid "Load..."
|
||
msgstr "Load..."
|
||
|
||
msgid "Cube"
|
||
msgstr "Cube"
|
||
|
||
msgid "Cylinder"
|
||
msgstr "Cylinder"
|
||
|
||
msgid "Cone"
|
||
msgstr "Cone"
|
||
|
||
msgid "Disc"
|
||
msgstr "Disc"
|
||
|
||
msgid "Torus"
|
||
msgstr "Torus"
|
||
|
||
msgid "Rounded Rectangle"
|
||
msgstr "Rounded Rectangle"
|
||
|
||
msgid "QIDI Cube"
|
||
msgstr "QIDI Cube"
|
||
|
||
msgid "QIDI Cube V2"
|
||
msgstr "QIDI Cube V2"
|
||
|
||
msgid "3DBenchy"
|
||
msgstr "3DBenchy"
|
||
|
||
msgid "ksr FDMTest"
|
||
msgstr "ksr FDMTest"
|
||
|
||
msgid "Height range Modifier"
|
||
msgstr "Height range Modifier"
|
||
|
||
msgid "Add settings"
|
||
msgstr "Add settings"
|
||
|
||
msgid "Change type"
|
||
msgstr "Change type"
|
||
|
||
msgid "Set as an individual object"
|
||
msgstr "Set as an individual object"
|
||
|
||
msgid "Set as individual objects"
|
||
msgstr "Set as individual objects"
|
||
|
||
msgid "Printable"
|
||
msgstr "Printable"
|
||
|
||
msgid "Fix model"
|
||
msgstr "Fix model"
|
||
|
||
msgid "Export as one STL"
|
||
msgstr "Export as one STL"
|
||
|
||
msgid "Export as STLs"
|
||
msgstr "Export as STLs"
|
||
|
||
msgid "Reload from disk"
|
||
msgstr "Reload from disk"
|
||
|
||
msgid "Reload the selected parts from disk"
|
||
msgstr "Reload the selected parts from disk"
|
||
|
||
msgid "Replace with STL"
|
||
msgstr "Replace with STL"
|
||
|
||
msgid "Replace the selected part with new STL"
|
||
msgstr "Replace the selected part with new STL"
|
||
|
||
msgid "Change filament"
|
||
msgstr "Change filament"
|
||
|
||
msgid "Set filament for selected items"
|
||
msgstr "Set filament for selected items"
|
||
|
||
msgid "Default"
|
||
msgstr "Default"
|
||
|
||
#, c-format, boost-format
|
||
msgid "Filament %d"
|
||
msgstr "Filament %d"
|
||
|
||
msgid "current"
|
||
msgstr "current"
|
||
|
||
msgid "Scale to build volume"
|
||
msgstr "Scale to build volume"
|
||
|
||
msgid "Scale an object to fit the build volume"
|
||
msgstr "Scale an object to fit the build volume"
|
||
|
||
msgid "Flush Options"
|
||
msgstr "Flush Options"
|
||
|
||
msgid "Flush into objects' infill"
|
||
msgstr "Flush into objects' infill"
|
||
|
||
msgid "Flush into this object"
|
||
msgstr "Flush into this object"
|
||
|
||
msgid "Flush into objects' support"
|
||
msgstr "Flush into objects' support"
|
||
|
||
msgid "Edit in Parameter Table"
|
||
msgstr "Edit in Parameter Table"
|
||
|
||
msgid "Convert from inch"
|
||
msgstr "Convert from inch"
|
||
|
||
msgid "Restore to inch"
|
||
msgstr "Restore to inch"
|
||
|
||
msgid "Convert from meter"
|
||
msgstr "Convert from meter"
|
||
|
||
msgid "Restore to meter"
|
||
msgstr "Restore to meter"
|
||
|
||
msgid "Merge"
|
||
msgstr ""
|
||
|
||
msgid "Assemble the selected objects to an object with multiple parts"
|
||
msgstr "Assemble the selected objects into an object with multiple parts"
|
||
|
||
msgid "Assemble the selected objects to an object with single part"
|
||
msgstr "Assemble the selected objects into an object that is a single part"
|
||
|
||
msgid "Mesh boolean"
|
||
msgstr "Mesh boolean"
|
||
|
||
msgid "Mesh boolean operations including union and subtraction"
|
||
msgstr "Mesh boolean operations including union and subtraction"
|
||
|
||
msgid "Along X axis"
|
||
msgstr "Along X axis"
|
||
|
||
msgid "Mirror along the X axis"
|
||
msgstr "Mirror along the X axis"
|
||
|
||
msgid "Along Y axis"
|
||
msgstr "Along Y axis"
|
||
|
||
msgid "Mirror along the Y axis"
|
||
msgstr "Mirror along the Y axis"
|
||
|
||
msgid "Along Z axis"
|
||
msgstr "Along Z axis"
|
||
|
||
msgid "Mirror along the Z axis"
|
||
msgstr "Mirror along the Z axis"
|
||
|
||
msgid "Mirror"
|
||
msgstr "Mirror"
|
||
|
||
msgid "Mirror object"
|
||
msgstr "Mirror object"
|
||
|
||
msgid "Invalidate cut info"
|
||
msgstr "Invalidate cut info"
|
||
|
||
msgid "Add Primitive"
|
||
msgstr "Add Primitive"
|
||
|
||
msgid "Show Labels"
|
||
msgstr "Show Labels"
|
||
|
||
msgid "To objects"
|
||
msgstr "To objects"
|
||
|
||
msgid "Split the selected object into multiple objects"
|
||
msgstr "Split the selected object into multiple objects"
|
||
|
||
msgid "To parts"
|
||
msgstr "To parts"
|
||
|
||
msgid "Split the selected object into multiple parts"
|
||
msgstr "Split the selected object into multiple parts"
|
||
|
||
msgid "Split"
|
||
msgstr "Split"
|
||
|
||
msgid "Split the selected object"
|
||
msgstr "Split the selected object"
|
||
|
||
msgid "Auto orientation"
|
||
msgstr "Auto orientation"
|
||
|
||
msgid "Auto orient the object to improve print quality."
|
||
msgstr "Auto orient the object to improve print quality."
|
||
|
||
msgid "Select All"
|
||
msgstr "Select All"
|
||
|
||
msgid "select all objects on current plate"
|
||
msgstr "select all objects on current plate"
|
||
|
||
msgid "Delete All"
|
||
msgstr "Delete All"
|
||
|
||
msgid "delete all objects on current plate"
|
||
msgstr "delete all objects on current plate"
|
||
|
||
msgid "Arrange"
|
||
msgstr "Arrange"
|
||
|
||
msgid "arrange current plate"
|
||
msgstr "arrange current plate"
|
||
|
||
msgid "Auto Rotate"
|
||
msgstr "Auto Rotate"
|
||
|
||
msgid "auto rotate current plate"
|
||
msgstr "auto rotate current plate"
|
||
|
||
msgid "Delete Plate"
|
||
msgstr "Delete Plate"
|
||
|
||
msgid "Remove the selected plate"
|
||
msgstr "Remove the selected plate"
|
||
|
||
msgid "Clone"
|
||
msgstr "Clone"
|
||
|
||
msgid "Simplify Model"
|
||
msgstr "Simplify Model"
|
||
|
||
msgid "Center"
|
||
msgstr "Center"
|
||
|
||
msgid "Edit Process Settings"
|
||
msgstr "Edit Process Settings"
|
||
|
||
msgid "Edit print parameters for a single object"
|
||
msgstr "Edit print parameters for a single object"
|
||
|
||
msgid "Change Filament"
|
||
msgstr "Change Filament"
|
||
|
||
msgid "Set Filament for selected items"
|
||
msgstr "Set Filament for selected items"
|
||
|
||
msgid "Unlock"
|
||
msgstr "Unlock"
|
||
|
||
msgid "Lock"
|
||
msgstr "Lock"
|
||
|
||
msgid "Fill bed with copies"
|
||
msgstr "Fill bed with copies"
|
||
|
||
msgid "Fill the remaining area of bed with copies of the selected object"
|
||
msgstr "Fill the remaining area of bed with copies of the selected object"
|
||
|
||
msgid "Edit Plate Name"
|
||
msgstr "Edit Plate Name"
|
||
|
||
msgid "Name"
|
||
msgstr "Name"
|
||
|
||
msgid "Fila."
|
||
msgstr "Fila."
|
||
|
||
#, c-format, boost-format
|
||
msgid "%1$d error repaired"
|
||
msgid_plural "%1$d errors repaired"
|
||
msgstr[0] "%1$d error repaired"
|
||
msgstr[1] "%1$d errors repaired"
|
||
|
||
#, c-format, boost-format
|
||
msgid "Error: %1$d non-manifold edge."
|
||
msgid_plural "Error: %1$d non-manifold edges."
|
||
msgstr[0] "Error: %1$d non-manifold edge."
|
||
msgstr[1] "Error: %1$d non-manifold edges."
|
||
|
||
msgid "Remaining errors"
|
||
msgstr "Remaining errors"
|
||
|
||
#, c-format, boost-format
|
||
msgid "%1$d non-manifold edge"
|
||
msgid_plural "%1$d non-manifold edges"
|
||
msgstr[0] "%1$d non-manifold edge"
|
||
msgstr[1] "%1$d non-manifold edges"
|
||
|
||
msgid "Right click the icon to fix model object"
|
||
msgstr "Right click the icon to fix model object"
|
||
|
||
msgid "Right button click the icon to drop the object settings"
|
||
msgstr "Right click the icon to drop the object settings"
|
||
|
||
msgid "Click the icon to reset all settings of the object"
|
||
msgstr "Click the icon to reset all settings of the object"
|
||
|
||
msgid "Right button click the icon to drop the object printable property"
|
||
msgstr "Right click the icon to drop the object printable property"
|
||
|
||
msgid "Click the icon to toggle printable property of the object"
|
||
msgstr "Click the icon to toggle printable properties of the object"
|
||
|
||
msgid "Click the icon to edit support painting of the object"
|
||
msgstr "Click the icon to edit support painting of the object"
|
||
|
||
msgid "Click the icon to edit color painting of the object"
|
||
msgstr "Click the icon to edit color painting for the object"
|
||
|
||
msgid "Click the icon to shift this object to the bed"
|
||
msgstr "Click the icon to shift this object to the bed"
|
||
|
||
msgid "Loading file"
|
||
msgstr "Loading file"
|
||
|
||
msgid "Error!"
|
||
msgstr "Error!"
|
||
|
||
msgid "Failed to get the model data in the current file."
|
||
msgstr "Failed to get the model data in the current file."
|
||
|
||
msgid "Generic"
|
||
msgstr "Generic"
|
||
|
||
msgid "Add Modifier"
|
||
msgstr "Add Modifier"
|
||
|
||
msgid "Switch to per-object setting mode to edit modifier settings."
|
||
msgstr "Switch to per-object setting mode to edit modifier settings."
|
||
|
||
msgid ""
|
||
"Switch to per-object setting mode to edit process settings of selected "
|
||
"objects."
|
||
msgstr ""
|
||
"Switch to per-object setting mode to edit process settings of selected "
|
||
"objects."
|
||
|
||
msgid "Delete connector from object which is a part of cut"
|
||
msgstr "Delete connector from object which is a part of cut"
|
||
|
||
msgid "Delete solid part from object which is a part of cut"
|
||
msgstr "Delete solid part from object which is a part of cut"
|
||
|
||
msgid "Delete negative volume from object which is a part of cut"
|
||
msgstr "Delete negative volume from object which is a part of cut"
|
||
|
||
msgid ""
|
||
"To save cut correspondence you can delete all connectors from all related "
|
||
"objects."
|
||
msgstr ""
|
||
"To save cut correspondence you can delete all connectors from all related "
|
||
"objects."
|
||
|
||
msgid ""
|
||
"This action will break a cut correspondence.\n"
|
||
"After that model consistency can't be guaranteed .\n"
|
||
"\n"
|
||
"To manipulate solid parts or negative volumes you have to invalidate cut "
|
||
"information first."
|
||
msgstr ""
|
||
"This action will break a cut correspondence.\n"
|
||
"After that, model consistency can't be guaranteed.\n"
|
||
"\n"
|
||
"To manipulate solid parts or negative volumes you have to invalidate cut "
|
||
"information first."
|
||
|
||
msgid "Delete all connectors"
|
||
msgstr "Delete all connectors"
|
||
|
||
msgid "Deleting the last solid part is not allowed."
|
||
msgstr "Deleting the last solid part is not allowed."
|
||
|
||
msgid "The target object contains only one part and can not be split."
|
||
msgstr "The target object contains only one part and cannot be split."
|
||
|
||
msgid "Assembly"
|
||
msgstr "Assembly"
|
||
|
||
msgid "Cut Connectors information"
|
||
msgstr "Cut Connectors information"
|
||
|
||
msgid "Object manipulation"
|
||
msgstr "Object manipulation"
|
||
|
||
msgid "Group manipulation"
|
||
msgstr "Group manipulation"
|
||
|
||
msgid "Object Settings to modify"
|
||
msgstr "Object Settings to modify"
|
||
|
||
msgid "Part Settings to modify"
|
||
msgstr "Part Settings to modify"
|
||
|
||
msgid "Layer range Settings to modify"
|
||
msgstr "Layer range Settings to modify"
|
||
|
||
msgid "Part manipulation"
|
||
msgstr "Part manipulation"
|
||
|
||
msgid "Instance manipulation"
|
||
msgstr "Instance manipulation"
|
||
|
||
msgid "Height ranges"
|
||
msgstr "Height ranges"
|
||
|
||
msgid "Settings for height range"
|
||
msgstr "Settings for height range"
|
||
|
||
msgid "Layer"
|
||
msgstr "Layer"
|
||
|
||
msgid "Selection conflicts"
|
||
msgstr "Selection conflicts"
|
||
|
||
msgid ""
|
||
"If the first selected item is an object, the second one should also be an "
|
||
"object."
|
||
msgstr ""
|
||
"If the first selected item is an object, the second one should also be an "
|
||
"object."
|
||
|
||
msgid ""
|
||
"If the first selected item is a part, the second one should be part of the "
|
||
"same object."
|
||
msgstr ""
|
||
"If the first selected item is a part, the second one should be part of the "
|
||
"same object."
|
||
|
||
msgid "The type of the last solid object part is not to be changed."
|
||
msgstr "The type of the last solid object part is not to be changed."
|
||
|
||
msgid "Negative Part"
|
||
msgstr "Negative Part"
|
||
|
||
msgid "Modifier"
|
||
msgstr "Modifier"
|
||
|
||
msgid "Support Blocker"
|
||
msgstr "Support Blocker"
|
||
|
||
msgid "Support Enforcer"
|
||
msgstr "Support Enforcer"
|
||
|
||
msgid "Type:"
|
||
msgstr "Type:"
|
||
|
||
msgid "Choose part type"
|
||
msgstr "Choose part type"
|
||
|
||
msgid "Enter new name"
|
||
msgstr "Enter new name"
|
||
|
||
msgid "Renaming"
|
||
msgstr "Renaming"
|
||
|
||
msgid "Following model object has been repaired"
|
||
msgid_plural "Following model objects have been repaired"
|
||
msgstr[0] "The following model object has been repaired"
|
||
msgstr[1] "The following model objects have been repaired"
|
||
|
||
msgid "Failed to repair the following model object"
|
||
msgid_plural "Failed to repair the following model object"
|
||
msgstr[0] ""
|
||
msgstr[1] ""
|
||
|
||
msgid "Repairing was canceled"
|
||
msgstr "Repairing was canceled"
|
||
|
||
msgid "Additional process preset"
|
||
msgstr "Additional process preset"
|
||
|
||
msgid "Remove parameter"
|
||
msgstr "Remove parameter"
|
||
|
||
msgid "to"
|
||
msgstr "to"
|
||
|
||
msgid "Remove height range"
|
||
msgstr "Remove height range"
|
||
|
||
msgid "Add height range"
|
||
msgstr "Add height range"
|
||
|
||
msgid "Invalid numeric."
|
||
msgstr "Invalid numeric."
|
||
|
||
msgid "one cell can only be copied to one or multiple cells in the same column"
|
||
msgstr ""
|
||
"one cell can only be copied to one or multiple cells in the same column"
|
||
|
||
msgid "multiple cells copy is not supported"
|
||
msgstr "multiple cells copy is not supported"
|
||
|
||
msgid "Outside"
|
||
msgstr "Outside"
|
||
|
||
msgid " "
|
||
msgstr ""
|
||
|
||
msgid "Layer height"
|
||
msgstr "Layer height"
|
||
|
||
msgid "Wall loops"
|
||
msgstr "Wall loops"
|
||
|
||
msgid "Infill density(%)"
|
||
msgstr "Infill density(%)"
|
||
|
||
msgid "Auto Brim"
|
||
msgstr "Auto Brim"
|
||
|
||
msgid "Auto"
|
||
msgstr "Auto"
|
||
|
||
msgid "Outer brim only"
|
||
msgstr "Outer brim only"
|
||
|
||
msgid "Inner brim only"
|
||
msgstr "Inner brim only"
|
||
|
||
msgid "Outer and inner brim"
|
||
msgstr "Outer and inner brim"
|
||
|
||
msgid "No-brim"
|
||
msgstr "No-brim"
|
||
|
||
msgid "Outer wall speed"
|
||
msgstr "Outer wall speed"
|
||
|
||
msgid "Plate"
|
||
msgstr "Plate"
|
||
|
||
msgid "Brim"
|
||
msgstr "Brim"
|
||
|
||
msgid "Object/Part Setting"
|
||
msgstr "Object/Part Setting"
|
||
|
||
msgid "Reset parameter"
|
||
msgstr "Reset parameter"
|
||
|
||
msgid "Multicolor Print"
|
||
msgstr "Multicolor Print"
|
||
|
||
msgid "Line Type"
|
||
msgstr "Line Type"
|
||
|
||
msgid "More"
|
||
msgstr "More"
|
||
|
||
msgid "Open Preferences."
|
||
msgstr "Open Preferences."
|
||
|
||
msgid "Open next tip."
|
||
msgstr "Open next tip."
|
||
|
||
msgid "Open Documentation in web browser."
|
||
msgstr "Open Documentation in web browser."
|
||
|
||
msgid "Color"
|
||
msgstr "Color"
|
||
|
||
msgid "Pause"
|
||
msgstr "Pause"
|
||
|
||
msgid "Template"
|
||
msgstr "Template"
|
||
|
||
msgid "Custom"
|
||
msgstr "Custom"
|
||
|
||
msgid "Pause:"
|
||
msgstr "Pause:"
|
||
|
||
msgid "Custom Template:"
|
||
msgstr "Custom Template:"
|
||
|
||
msgid "Custom G-code:"
|
||
msgstr "Custom G-code:"
|
||
|
||
msgid "Custom G-code"
|
||
msgstr "Custom G-code"
|
||
|
||
msgid "Enter Custom G-code used on current layer:"
|
||
msgstr "Enter Custom G-code used on current layer:"
|
||
|
||
msgid "OK"
|
||
msgstr "OK"
|
||
|
||
msgid "Jump to Layer"
|
||
msgstr "Jump to Layer"
|
||
|
||
msgid "Jump to layer"
|
||
msgstr "Jump to layer"
|
||
|
||
msgid "Please enter the layer number"
|
||
msgstr "Please enter the layer number"
|
||
|
||
msgid "Add Pause"
|
||
msgstr "Add Pause"
|
||
|
||
msgid "Insert a pause command at the beginning of this layer."
|
||
msgstr "Insert a pause command at the beginning of this layer."
|
||
|
||
msgid "Add Custom G-code"
|
||
msgstr "Add Custom G-code"
|
||
|
||
msgid "Insert custom G-code at the beginning of this layer."
|
||
msgstr "Insert custom G-code at the beginning of this layer."
|
||
|
||
msgid "Add Custom Template"
|
||
msgstr "Add Custom Template"
|
||
|
||
msgid "Insert template custom G-code at the beginning of this layer."
|
||
msgstr "Insert template custom G-code at the beginning of this layer."
|
||
|
||
msgid "Filament "
|
||
msgstr "Filament "
|
||
|
||
msgid "Change filament at the beginning of this layer."
|
||
msgstr "Change filament at the beginning of this layer."
|
||
|
||
msgid "Delete Pause"
|
||
msgstr "Delete Pause"
|
||
|
||
msgid "Delete Custom Template"
|
||
msgstr "Delete Custom Template"
|
||
|
||
msgid "Edit Custom G-code"
|
||
msgstr "Edit Custom G-code"
|
||
|
||
msgid "Delete Custom G-code"
|
||
msgstr "Delete Custom G-code"
|
||
|
||
msgid "Delete Filament Change"
|
||
msgstr "Delete Filament Change"
|
||
|
||
msgid "No printer"
|
||
msgstr "No printer"
|
||
|
||
msgid "..."
|
||
msgstr "..."
|
||
|
||
msgid "Failed to connect to the server"
|
||
msgstr "Failed to connect to the server"
|
||
|
||
msgid "Check the status of current system services"
|
||
msgstr "Check the status of current system services"
|
||
|
||
msgid "code"
|
||
msgstr "code"
|
||
|
||
msgid "Failed to connect to cloud service"
|
||
msgstr "Failed to connect to cloud service"
|
||
|
||
msgid "Please click on the hyperlink above to view the cloud service status"
|
||
msgstr "Please click on the hyperlink above to view the cloud service status"
|
||
|
||
msgid "Failed to connect to the printer"
|
||
msgstr "Failed to connect to the printer"
|
||
|
||
msgid "Connection to printer failed"
|
||
msgstr "Connection to printer failed"
|
||
|
||
msgid "Please check the network connection of the printer and Studio."
|
||
msgstr "Please check the network connection of the printer and Studio."
|
||
|
||
msgid "Connecting..."
|
||
msgstr "Connecting..."
|
||
|
||
msgid "?"
|
||
msgstr "?"
|
||
|
||
msgid "/"
|
||
msgstr "/"
|
||
|
||
msgid "Empty"
|
||
msgstr "Empty"
|
||
|
||
msgid "AMS"
|
||
msgstr "AMS"
|
||
|
||
msgid "Auto Refill"
|
||
msgstr "Auto Refill"
|
||
|
||
msgid "AMS not connected"
|
||
msgstr "AMS not connected"
|
||
|
||
msgid "Load"
|
||
msgstr "Load"
|
||
|
||
msgid "Unload"
|
||
msgstr "Unload"
|
||
|
||
msgid "Ext Spool"
|
||
msgstr "Ext Spool"
|
||
|
||
msgid "Tips"
|
||
msgstr "Tips"
|
||
|
||
msgid "Guide"
|
||
msgstr "Guide"
|
||
|
||
msgid "Retry"
|
||
msgstr "Retry"
|
||
|
||
msgid "Calibrating AMS..."
|
||
msgstr "Calibrating AMS..."
|
||
|
||
msgid "A problem occurred during calibration. Click to view the solution."
|
||
msgstr "A problem occurred during calibration. Click to view the solution."
|
||
|
||
msgid "Calibrate again"
|
||
msgstr "Calibrate again"
|
||
|
||
msgid "Cancel calibration"
|
||
msgstr "Cancel calibration"
|
||
|
||
msgid "Idling..."
|
||
msgstr "Idling..."
|
||
|
||
msgid "Heat the nozzle"
|
||
msgstr "Heat the nozzle"
|
||
|
||
msgid "Cut filament"
|
||
msgstr "Cut filament"
|
||
|
||
msgid "Pull back current filament"
|
||
msgstr "Pull back the current filament"
|
||
|
||
msgid "Push new filament into extruder"
|
||
msgstr "Push new filament into extruder"
|
||
|
||
msgid "Purge old filament"
|
||
msgstr "Purge old filament"
|
||
|
||
msgid "Feed Filament"
|
||
msgstr "Feed Filament"
|
||
|
||
msgid "Confirm extruded"
|
||
msgstr "Confirm extruded"
|
||
|
||
msgid "Check filament location"
|
||
msgstr "Check filament location"
|
||
|
||
msgid "Grab new filament"
|
||
msgstr "Grab new filament"
|
||
|
||
msgid ""
|
||
"Choose an AMS slot then press \"Load\" or \"Unload\" button to automatically "
|
||
"load or unload filaments."
|
||
msgstr ""
|
||
"Choose an AMS slot then press \"Load\" or \"Unload\" button to automatically "
|
||
"load or unload filament."
|
||
|
||
msgid "Edit"
|
||
msgstr "Edit"
|
||
|
||
msgid ""
|
||
"All the selected objects are on the locked plate,\n"
|
||
"We can not do auto-arrange on these objects."
|
||
msgstr ""
|
||
"All the selected objects are on the locked plate,\n"
|
||
"We can not do auto-arrange on these objects."
|
||
|
||
msgid "No arrangeable objects are selected."
|
||
msgstr "No arrangeable objects are selected."
|
||
|
||
msgid ""
|
||
"This plate is locked,\n"
|
||
"We can not do auto-arrange on this plate."
|
||
msgstr ""
|
||
"This plate is locked.\n"
|
||
"We cannot auto-arrange this plate."
|
||
|
||
msgid "Arranging..."
|
||
msgstr "Arranging..."
|
||
|
||
#, boost-format
|
||
msgid "Object %1% has zero size and can't be arranged."
|
||
msgstr "Object %1% has zero size and can't be arranged."
|
||
|
||
msgid ""
|
||
"Arrange failed. Found some exceptions when processing object geometries."
|
||
msgstr ""
|
||
"Arrange failed. Found some exceptions when processing object geometries."
|
||
|
||
msgid "Arranging"
|
||
msgstr "Arranging"
|
||
|
||
msgid "Arranging canceled."
|
||
msgstr "Arranging canceled."
|
||
|
||
msgid ""
|
||
"Arranging is done but there are unpacked items. Reduce spacing and try again."
|
||
msgstr ""
|
||
"Arranging is done but there are unpacked items. Reduce spacing and try again."
|
||
|
||
msgid "Arranging done."
|
||
msgstr "Arranging done."
|
||
|
||
#, c-format, boost-format
|
||
msgid ""
|
||
"Arrangement ignored the following objects which can't fit into a single "
|
||
"bed:\n"
|
||
"%s"
|
||
msgstr ""
|
||
"Arrangement ignored the following objects which can't fit into a single "
|
||
"bed:\n"
|
||
"%s"
|
||
|
||
msgid ""
|
||
"All the selected objects are on the locked plate,\n"
|
||
"We can not do auto-orient on these objects."
|
||
msgstr ""
|
||
"All the selected objects are on a locked plate,\n"
|
||
"We cannot auto-orient these objects."
|
||
|
||
msgid ""
|
||
"This plate is locked,\n"
|
||
"We can not do auto-orient on this plate."
|
||
msgstr ""
|
||
"This plate is locked.\n"
|
||
"We cannot auto-orient this plate."
|
||
|
||
msgid "Orienting..."
|
||
msgstr "Orienting..."
|
||
|
||
msgid "Orienting"
|
||
msgstr "Orienting"
|
||
|
||
msgid "Filling"
|
||
msgstr "Filling"
|
||
|
||
msgid "Bed filling canceled."
|
||
msgstr "Bed filling canceled."
|
||
|
||
msgid "Bed filling done."
|
||
msgstr "Bed filling done."
|
||
|
||
msgid "Error! Unable to create thread!"
|
||
msgstr "Error! Unable to create thread!"
|
||
|
||
msgid "Exception"
|
||
msgstr "Exception"
|
||
|
||
msgid "Logging in"
|
||
msgstr "Logging in"
|
||
|
||
msgid "Login failed"
|
||
msgstr "Login failed"
|
||
|
||
msgid "Please check the printer network connection."
|
||
msgstr "Please check the printer network connection."
|
||
|
||
msgid "Abnormal print file data. Please slice again."
|
||
msgstr "Abnormal print file data. Please slice again."
|
||
|
||
msgid "Task canceled."
|
||
msgstr "Task canceled."
|
||
|
||
msgid "Upload task timed out. Please check the network status and try again."
|
||
msgstr "Upload task timed out. Please check the network status and try again."
|
||
|
||
msgid "Cloud service connection failed. Please try again."
|
||
msgstr "Cloud service connection failed. Please try again."
|
||
|
||
msgid "Print file not found. please slice again."
|
||
msgstr "Print file not found. please slice again."
|
||
|
||
msgid ""
|
||
"The print file exceeds the maximum allowable size (1GB). Please simplify the "
|
||
"model and slice again."
|
||
msgstr ""
|
||
"The print file exceeds the maximum allowable size (1GB). Please simplify the "
|
||
"model and slice again."
|
||
|
||
msgid "Failed to send the print job. Please try again."
|
||
msgstr "Failed to send the print job. Please try again."
|
||
|
||
msgid "Failed to upload file to ftp. Please try again."
|
||
msgstr "Failed to upload file to ftp. Please try again."
|
||
|
||
msgid ""
|
||
"Check the current status of the qidi server by clicking on the link above."
|
||
msgstr ""
|
||
"Check the current status of the qidi server by clicking on the link above."
|
||
|
||
msgid ""
|
||
"The size of the print file is too large. Please adjust the file size and try "
|
||
"again."
|
||
msgstr ""
|
||
"The size of the print file is too large. Please adjust the file size and try "
|
||
"again."
|
||
|
||
msgid "Print file not found, Please slice it again and send it for printing."
|
||
msgstr "Print file not found; please slice it again and send it for printing."
|
||
|
||
msgid ""
|
||
"Failed to upload print file to FTP. Please check the network status and try "
|
||
"again."
|
||
msgstr ""
|
||
"Failed to upload print file to FTP. Please check the network status and try "
|
||
"again."
|
||
|
||
msgid "Sending print job over LAN"
|
||
msgstr "Sending print job over LAN"
|
||
|
||
msgid "Sending print job through cloud service"
|
||
msgstr "Sending print job through cloud service"
|
||
|
||
msgid "Print task sending times out."
|
||
msgstr "Print task sending times out."
|
||
|
||
msgid "Service Unavailable"
|
||
msgstr "Service Unavailable"
|
||
|
||
msgid "Unknown Error."
|
||
msgstr "Unknown Error."
|
||
|
||
msgid "Sending print configuration"
|
||
msgstr "Sending print configuration"
|
||
|
||
#, c-format, boost-format
|
||
msgid "Successfully sent. Will automatically jump to the device page in %ss"
|
||
msgstr "Successfully sent. Will automatically jump to the device page in %ss"
|
||
|
||
#, c-format, boost-format
|
||
msgid "Successfully sent. Will automatically jump to the next page in %ss"
|
||
msgstr "Successfully sent. Will automatically jump to the next page in %ss"
|
||
|
||
msgid "An SD card needs to be inserted before printing via LAN."
|
||
msgstr "A MicroSD card needs to be inserted before printing via LAN."
|
||
|
||
msgid "Sending gcode file over LAN"
|
||
msgstr "Sending gcode file over LAN"
|
||
|
||
msgid "Sending gcode file to sdcard"
|
||
msgstr "Sending gcode file to Micro SD card"
|
||
|
||
#, c-format, boost-format
|
||
msgid "Successfully sent. Close current page in %s s"
|
||
msgstr "Successfully sent. Close current page in %s s"
|
||
|
||
msgid "An SD card needs to be inserted before sending to printer."
|
||
msgstr "A MicroSD card needs to be inserted before sending to printer."
|
||
|
||
msgid "Choose SLA archive:"
|
||
msgstr "Choose SLA archive:"
|
||
|
||
msgid "Import file"
|
||
msgstr "Import file"
|
||
|
||
msgid "Import model and profile"
|
||
msgstr "Import model and profile"
|
||
|
||
msgid "Import profile only"
|
||
msgstr "Import profile only"
|
||
|
||
msgid "Import model only"
|
||
msgstr "Import model only"
|
||
|
||
msgid "Accurate"
|
||
msgstr "Accurate"
|
||
|
||
msgid "Balanced"
|
||
msgstr "Balanced"
|
||
|
||
msgid "Quick"
|
||
msgstr "Quick"
|
||
|
||
msgid "Importing SLA archive"
|
||
msgstr "Importing SLA archive"
|
||
|
||
msgid ""
|
||
"The SLA archive doesn't contain any presets. Please activate some SLA "
|
||
"printer preset first before importing that SLA archive."
|
||
msgstr ""
|
||
"The SLA archive doesn't contain any presets. Please activate some SLA "
|
||
"printer preset first before importing that SLA archive."
|
||
|
||
msgid "Importing canceled."
|
||
msgstr "Importing canceled."
|
||
|
||
msgid "Importing done."
|
||
msgstr "Importing done."
|
||
|
||
msgid ""
|
||
"The imported SLA archive did not contain any presets. The current SLA "
|
||
"presets were used as fallback."
|
||
msgstr ""
|
||
"The imported SLA archive did not contain any presets. The current SLA "
|
||
"presets were used as fallback."
|
||
|
||
msgid "You cannot load SLA project with a multi-part object on the bed"
|
||
msgstr "You cannot load SLA project with a multi-part object on the bed"
|
||
|
||
msgid "Please check your object list before preset changing."
|
||
msgstr "Please check your object list before preset changing."
|
||
|
||
msgid "Attention!"
|
||
msgstr "Attention!"
|
||
|
||
msgid "Downloading"
|
||
msgstr "Downloading"
|
||
|
||
msgid "Download failed"
|
||
msgstr "Download failed"
|
||
|
||
msgid "Cancelled"
|
||
msgstr "Cancelled"
|
||
|
||
msgid "Install successfully."
|
||
msgstr "Install successfully."
|
||
|
||
msgid "Installing"
|
||
msgstr "Installing"
|
||
|
||
msgid "Install failed"
|
||
msgstr "Install failed"
|
||
|
||
msgid "Portions copyright"
|
||
msgstr "License Info"
|
||
|
||
msgid "Copyright"
|
||
msgstr "Copyright"
|
||
|
||
msgid "License"
|
||
msgstr "License"
|
||
|
||
msgid "QIDI Studio is licensed under "
|
||
msgstr "QIDI Studio is licensed under "
|
||
|
||
msgid "GNU Affero General Public License, version 3"
|
||
msgstr "GNU Affero General Public License, version 3"
|
||
|
||
msgid "QIDI Studio is based on Bambu Studio by Bambu Lab"
|
||
msgstr "QIDI Studio is based on Bambu Studio by Bambu Lab"
|
||
|
||
msgid ""
|
||
"Bambu Studio is based on PrusaSlicer by Prusa Research, which is from Slic3r "
|
||
"by Alessandro Ranellucci and the RepRap community"
|
||
msgstr ""
|
||
"Bambu Studio is based on PrusaSlicer by Prusa Research, which is based on "
|
||
"Slic3r by Alessandro Ranellucci and the RepRap community"
|
||
|
||
msgid "Libraries"
|
||
msgstr "Libraries"
|
||
|
||
msgid ""
|
||
"This software uses open source components whose copyright and other "
|
||
"proprietary rights belong to their respective owners"
|
||
msgstr ""
|
||
"This software uses open source components whose copyright and other "
|
||
"proprietary rights belong to their respective owners"
|
||
|
||
#, c-format, boost-format
|
||
msgid "About %s"
|
||
msgstr "About %s"
|
||
|
||
msgid "Seal"
|
||
msgstr "Seal"
|
||
|
||
msgid "QIDI Studio is based on Bambu Studio by Bambu Lab."
|
||
msgstr "QIDI Studio is based on Bambu Studio by Bambu Lab."
|
||
|
||
msgid ""
|
||
"Bambu Studio is based on PrusaSlicer by PrusaResearch and SuperSlicer by "
|
||
"Merill(supermerill)."
|
||
msgstr ""
|
||
"Bambu Studio is based on PrusaSlicer by PrusaResearch and SuperSlicer by "
|
||
"Merill(supermerill)."
|
||
|
||
msgid "PrusaSlicer is originally based on Slic3r by Alessandro Ranellucci."
|
||
msgstr "PrusaSlicer is originally based on Slic3r by Alessandro Ranellucci."
|
||
|
||
msgid ""
|
||
"Slic3r was created by Alessandro Ranellucci with the help of many other "
|
||
"contributors."
|
||
msgstr ""
|
||
"Slic3r was created by Alessandro Ranellucci with the help of many other "
|
||
"contributors."
|
||
|
||
msgid "QIDI Studio also referenced some ideas from Cura by Ultimaker."
|
||
msgstr "QIDI Studio also referenced some ideas from Cura by Ultimaker."
|
||
|
||
msgid ""
|
||
"There many parts of the software that come from community contributions, so "
|
||
"we're unable to list them one-by-one, and instead, they'll be attributed in "
|
||
"the corresponding code comments."
|
||
msgstr ""
|
||
"There many parts of the software that come from community contributions, so "
|
||
"we're unable to list them one-by-one, and instead, they'll be attributed in "
|
||
"the corresponding code comments."
|
||
|
||
msgid "AMS Materials Setting"
|
||
msgstr "AMS Materials Setting"
|
||
|
||
msgid "Confirm"
|
||
msgstr "Confirm"
|
||
|
||
msgid "Close"
|
||
msgstr "Close"
|
||
|
||
msgid "Colour"
|
||
msgstr "Color"
|
||
|
||
msgid ""
|
||
"Nozzle\n"
|
||
"Temperature"
|
||
msgstr ""
|
||
"Nozzle\n"
|
||
"Temperature"
|
||
|
||
msgid "max"
|
||
msgstr "max"
|
||
|
||
msgid "min"
|
||
msgstr "min"
|
||
|
||
#, boost-format
|
||
msgid "The input value should be greater than %1% and less than %2%"
|
||
msgstr "The input value should be greater than %1% and less than %2%"
|
||
|
||
msgid "SN"
|
||
msgstr "SN"
|
||
|
||
msgid "Setting AMS slot information while printing is not supported"
|
||
msgstr "Setting AMS slot information while printing is not supported"
|
||
|
||
msgid "Factors of Flow Dynamics Calibration"
|
||
msgstr "Factors of Flow Dynamics Calibration"
|
||
|
||
msgid "PA Profile"
|
||
msgstr "PA Profile"
|
||
|
||
msgid "Factor K"
|
||
msgstr "Factor K"
|
||
|
||
msgid "Factor N"
|
||
msgstr "Factor N"
|
||
|
||
msgid "Setting Virtual slot information while printing is not supported"
|
||
msgstr "Setting Virtual slot information while printing is not supported"
|
||
|
||
msgid "Are you sure you want to clear the filament information?"
|
||
msgstr "Are you sure you want to clear the filament information?"
|
||
|
||
msgid "You need to select the material type and color first."
|
||
msgstr "You need to select the material type and color first."
|
||
|
||
#, c-format, boost-format
|
||
msgid "Please input a valid value (K in %.1f~%.1f)"
|
||
msgstr ""
|
||
|
||
#, c-format, boost-format
|
||
msgid "Please input a valid value (K in %.1f~%.1f, N in %.1f~%.1f)"
|
||
msgstr ""
|
||
|
||
msgid "Other Color"
|
||
msgstr "Other Color"
|
||
|
||
msgid "Custom Color"
|
||
msgstr "Custom Color"
|
||
|
||
msgid "Dynamic flow calibration"
|
||
msgstr "Dynamic flow calibration"
|
||
|
||
msgid ""
|
||
"The nozzle temp and max volumetric speed will affect the calibration "
|
||
"results. Please fill in the same values as the actual printing. They can be "
|
||
"auto-filled by selecting a filament preset."
|
||
msgstr ""
|
||
"The nozzle temp and max volumetric speed will affect the calibration "
|
||
"results. Please fill in the same values as the actual printing. They can be "
|
||
"auto-filled by selecting a filament preset."
|
||
|
||
msgid "Nozzle Diameter"
|
||
msgstr "Nozzle Diameter"
|
||
|
||
msgid "Bed Type"
|
||
msgstr "Plate Type"
|
||
|
||
msgid "Nozzle temperature"
|
||
msgstr "Nozzle temperature"
|
||
|
||
msgid "Bed Temperature"
|
||
msgstr "Bed Temperature"
|
||
|
||
msgid "Max volumetric speed"
|
||
msgstr "Max volumetric speed"
|
||
|
||
msgid "Bed temperature"
|
||
msgstr "Bed temperature"
|
||
|
||
msgid "Start calibration"
|
||
msgstr "Start calibration"
|
||
|
||
msgid "Next"
|
||
msgstr "Next"
|
||
|
||
msgid ""
|
||
"Calibration completed. Please find the most uniform extrusion line on your "
|
||
"hot bed like the picture below, and fill the value on its left side into the "
|
||
"factor K input box."
|
||
msgstr ""
|
||
"Calibration completed. Please find the most uniform extrusion line on your "
|
||
"hot bed like the picture below, and fill the value on its left side into the "
|
||
"factor K input box."
|
||
|
||
msgid "Save"
|
||
msgstr "Save"
|
||
|
||
msgid "Last Step"
|
||
msgstr "Last Step"
|
||
|
||
msgid "Example"
|
||
msgstr "Example"
|
||
|
||
#, c-format, boost-format
|
||
msgid "Calibrating... %d%%"
|
||
msgstr "Calibrating... %d%%"
|
||
|
||
msgid "Calibration completed"
|
||
msgstr "Calibration completed"
|
||
|
||
#, c-format, boost-format
|
||
msgid "%s does not support %s"
|
||
msgstr "%s does not support %s"
|
||
|
||
msgid "Dynamic flow Calibration"
|
||
msgstr "Dynamic flow Calibration"
|
||
|
||
msgid "Step"
|
||
msgstr "Step"
|
||
|
||
msgid "AMS Slots"
|
||
msgstr "AMS Slots"
|
||
|
||
msgid ""
|
||
"Note: Only the AMS slots loaded with the same material type can be selected."
|
||
msgstr ""
|
||
"Note: Only the AMS slots loaded with the same material type can be selected."
|
||
|
||
msgid "Enable AMS"
|
||
msgstr "Enable AMS"
|
||
|
||
msgid "Print with filaments in the AMS"
|
||
msgstr "Print with filaments in the AMS"
|
||
|
||
msgid "Disable AMS"
|
||
msgstr "Disable AMS"
|
||
|
||
msgid "Print with the filament mounted on the back of chassis"
|
||
msgstr "Print with the filament mounted on the back of chassis"
|
||
|
||
msgid "Current Cabin humidity"
|
||
msgstr "Current Cabin humidity"
|
||
|
||
msgid ""
|
||
"Please change the desiccant when it is too wet. The indicator may not "
|
||
"represent accurately in following cases : when the lid is open or the "
|
||
"desiccant pack is changed. it take hours to absorb the moisture, low "
|
||
"temperatures also slow down the process."
|
||
msgstr ""
|
||
"Please change the desiccant when it is too wet. The indicator may not "
|
||
"represent accurately in following cases: when the lid is open or the "
|
||
"desiccant pack is changed. It takes a few hours to absorb the moisture, and "
|
||
"low temperatures also slow down the process."
|
||
|
||
msgid ""
|
||
"Config which AMS slot should be used for a filament used in the print job"
|
||
msgstr ""
|
||
"Config which AMS slot should be used for a filament used in the print job"
|
||
|
||
msgid "Filament used in this print job"
|
||
msgstr "Filament used in this print job"
|
||
|
||
msgid "AMS slot used for this filament"
|
||
msgstr "AMS slot used for this filament"
|
||
|
||
msgid "Click to select AMS slot manually"
|
||
msgstr "Click to select AMS slot manually"
|
||
|
||
msgid "Do not Enable AMS"
|
||
msgstr "Do not Enable AMS"
|
||
|
||
msgid "Print using materials mounted on the back of the case"
|
||
msgstr "Print using materials mounted on the back of the case"
|
||
|
||
msgid "Print with filaments in ams"
|
||
msgstr "Print with filaments in ams"
|
||
|
||
msgid "Print with filaments mounted on the back of the chassis"
|
||
msgstr "Print with filaments mounted on the back of the chassis"
|
||
|
||
msgid ""
|
||
"When the current material run out, the printer will continue to print in the "
|
||
"following order."
|
||
msgstr ""
|
||
"When the current material run out, the printer will continue to print in the "
|
||
"following order."
|
||
|
||
msgid "Group"
|
||
msgstr "Group"
|
||
|
||
msgid "The printer does not currently support auto refill."
|
||
msgstr "The printer does not currently support auto refill."
|
||
|
||
msgid ""
|
||
"AMS filament backup is not enabled, please enable it in the AMS settings."
|
||
msgstr ""
|
||
"AMS filament backup is not enabled; please enable it in the AMS settings."
|
||
|
||
msgid ""
|
||
"If there are two identical filaments in AMS, AMS filament backup will be "
|
||
"enabled. \n"
|
||
"(Currently supporting automatic supply of consumables with the same brand, "
|
||
"material type, and color)"
|
||
msgstr ""
|
||
"If there are two identical filaments in an AMS, AMS filament backup will be "
|
||
"enabled. \n"
|
||
"(This currently supports automatic supply of consumables with the same "
|
||
"brand, material type, and color)"
|
||
|
||
msgid "DRY"
|
||
msgstr "DRY"
|
||
|
||
msgid "WET"
|
||
msgstr "WET"
|
||
|
||
msgid "AMS Settings"
|
||
msgstr "AMS Settings"
|
||
|
||
msgid "Insertion update"
|
||
msgstr "Insertion update"
|
||
|
||
msgid ""
|
||
"The AMS will automatically read the filament information when inserting a "
|
||
"new QIDI Lab filament. This takes about 20 seconds."
|
||
msgstr ""
|
||
"The AMS will automatically read the filament information when inserting a "
|
||
"new QIDI Lab filament spool. This takes about 20 seconds."
|
||
|
||
msgid ""
|
||
"Note: if a new filament is inserted during printing, the AMS will not "
|
||
"automatically read any information until printing is completed."
|
||
msgstr ""
|
||
"Note: if a new filament is inserted during printing, the AMS will not "
|
||
"automatically read any information until printing is completed."
|
||
|
||
msgid ""
|
||
"When inserting a new filament, the AMS will not automatically read its "
|
||
"information, leaving it blank for you to enter manually."
|
||
msgstr ""
|
||
"When inserting a new filament, the AMS will not automatically read its "
|
||
"information, leaving it blank for you to enter manually."
|
||
|
||
msgid "Power on update"
|
||
msgstr "Update on startup"
|
||
|
||
msgid ""
|
||
"The AMS will automatically read the information of inserted filament on "
|
||
"start-up. It will take about 1 minute.The reading process will roll filament "
|
||
"spools."
|
||
msgstr ""
|
||
"The AMS will automatically read the information of inserted filament on "
|
||
"start-up. It will take about 1 minute.The reading process will rotate the "
|
||
"filament spools."
|
||
|
||
msgid ""
|
||
"The AMS will not automatically read information from inserted filament "
|
||
"during startup and will continue to use the information recorded before the "
|
||
"last shutdown."
|
||
msgstr ""
|
||
"The AMS will not automatically read information from inserted filament "
|
||
"during startup and will continue to use the information recorded before the "
|
||
"last shutdown."
|
||
|
||
msgid "Update remaining capacity"
|
||
msgstr "Update remaining capacity"
|
||
|
||
msgid ""
|
||
"The AMS will estimate QIDI filament's remaining capacity after the filament "
|
||
"info is updated. During printing, remaining capacity will be updated "
|
||
"automatically."
|
||
msgstr ""
|
||
"The AMS will estimate QIDI filament's remaining capacity after the filament "
|
||
"info is updated. During printing, remaining capacity will be updated "
|
||
"automatically."
|
||
|
||
msgid "AMS filament backup"
|
||
msgstr "AMS filament backup"
|
||
|
||
msgid ""
|
||
"AMS will continue to another spool with the same properties of filament "
|
||
"automatically when current filament runs out"
|
||
msgstr ""
|
||
"AMS will continue to another spool with the same properties of filament "
|
||
"automatically when current filament runs out"
|
||
|
||
msgid "Air Printing Detection"
|
||
msgstr "Air Printing Detection"
|
||
|
||
msgid ""
|
||
"Detects clogging and filament grinding, halting printing immediately to "
|
||
"conserve time and filament."
|
||
msgstr ""
|
||
"Detects clogging and filament grinding, halting printing immediately to "
|
||
"conserve time and filament."
|
||
|
||
msgid "File"
|
||
msgstr "File"
|
||
|
||
msgid "Calibration"
|
||
msgstr "Calibration"
|
||
|
||
msgid ""
|
||
"Failed to download the plug-in. Please check your firewall settings and vpn "
|
||
"software, check and retry."
|
||
msgstr ""
|
||
"Failed to download the plug-in. Please check your firewall settings and vpn "
|
||
"software, check and retry."
|
||
|
||
msgid ""
|
||
"Failed to install the plug-in. Please check whether it is blocked or deleted "
|
||
"by anti-virus software."
|
||
msgstr ""
|
||
"Failed to install the plug-in. Please check whether it is blocked or deleted "
|
||
"by anti-virus software."
|
||
|
||
msgid "click here to see more info"
|
||
msgstr "click here to see more info"
|
||
|
||
msgid "Please home all axes (click "
|
||
msgstr "Please home all axes (click "
|
||
|
||
msgid ""
|
||
") to locate the toolhead's position. This prevents device moving beyond the "
|
||
"printable boundary and causing equipment wear."
|
||
msgstr ""
|
||
") to locate the toolhead's position. This prevents device moving beyond the "
|
||
"printable boundary and causing equipment wear."
|
||
|
||
msgid "Go Home"
|
||
msgstr "Go Home"
|
||
|
||
msgid ""
|
||
"An error occurred. Maybe memory of system is not enough or it's a bug of the "
|
||
"program"
|
||
msgstr ""
|
||
"An error occurred. System memory may not be enough or it may be a program "
|
||
"bug."
|
||
|
||
msgid "Please save project and restart the program. "
|
||
msgstr "Please save project and restart the program. "
|
||
|
||
msgid "Processing G-Code from Previous file..."
|
||
msgstr "Processing G-Code from Previous file..."
|
||
|
||
msgid "Slicing complete"
|
||
msgstr "Slicing complete"
|
||
|
||
msgid "Access violation"
|
||
msgstr "Access violation"
|
||
|
||
msgid "Illegal instruction"
|
||
msgstr "Illegal instruction"
|
||
|
||
msgid "Divide by zero"
|
||
msgstr "Divide by zero"
|
||
|
||
msgid "Overflow"
|
||
msgstr "Overflow"
|
||
|
||
msgid "Underflow"
|
||
msgstr "Underflow"
|
||
|
||
msgid "Floating reserved operand"
|
||
msgstr "Floating reserved operand"
|
||
|
||
msgid "Stack overflow"
|
||
msgstr "Stack overflow"
|
||
|
||
msgid "Running post-processing scripts"
|
||
msgstr "Running post-processing scripts"
|
||
|
||
msgid "Successfully executed post-processing script"
|
||
msgstr "Successfully executed post-processing script"
|
||
|
||
msgid "Unknown error when export G-code."
|
||
msgstr "Unknown error when export G-code."
|
||
|
||
#, boost-format
|
||
msgid ""
|
||
"Failed to save gcode file.\n"
|
||
"Error message: %1%.\n"
|
||
"Source file %2%."
|
||
msgstr ""
|
||
"Failed to save G-code file.\n"
|
||
"Error message: %1%.\n"
|
||
"Source file %2%."
|
||
|
||
msgid "Copying of the temporary G-code to the output G-code failed"
|
||
msgstr "Copying of the temporary G-code to the output G-code failed"
|
||
|
||
#, boost-format
|
||
msgid "Scheduling upload to `%1%`. See Window -> Print Host Upload Queue"
|
||
msgstr "Scheduling upload to `%1%`. See Window -> Print Host Upload Queue"
|
||
|
||
msgid "Origin"
|
||
msgstr "Origin"
|
||
|
||
msgid "Size in X and Y of the rectangular plate."
|
||
msgstr "Size in X and Y of the rectangular plate."
|
||
|
||
msgid ""
|
||
"Distance of the 0,0 G-code coordinate from the front left corner of the "
|
||
"rectangle."
|
||
msgstr ""
|
||
"Distance of the 0,0 G-code coordinate from the front left corner of the "
|
||
"rectangle."
|
||
|
||
msgid ""
|
||
"Diameter of the print bed. It is assumed that origin (0,0) is located in the "
|
||
"center."
|
||
msgstr ""
|
||
"Diameter of the print bed. It is assumed that origin (0,0) is located in the "
|
||
"center."
|
||
|
||
msgid "Rectangular"
|
||
msgstr "Rectangular"
|
||
|
||
msgid "Circular"
|
||
msgstr "Circular"
|
||
|
||
msgid "Settings"
|
||
msgstr "Settings"
|
||
|
||
msgid "Texture"
|
||
msgstr "Texture"
|
||
|
||
msgid "Remove"
|
||
msgstr "Remove"
|
||
|
||
msgid "Not found:"
|
||
msgstr "Not found:"
|
||
|
||
msgid "Model"
|
||
msgstr "Model"
|
||
|
||
msgid "Choose an STL file to import bed shape from:"
|
||
msgstr "Choose an STL file to import bed shape from:"
|
||
|
||
msgid "Invalid file format."
|
||
msgstr "Invalid file format."
|
||
|
||
msgid "Error! Invalid model"
|
||
msgstr "Error! Invalid model"
|
||
|
||
msgid "The selected file contains no geometry."
|
||
msgstr "The selected file contains no geometry."
|
||
|
||
msgid ""
|
||
"The selected file contains several disjoint areas. This is not supported."
|
||
msgstr ""
|
||
"The selected file contains several disjoint areas. This is not supported."
|
||
|
||
msgid "Choose a file to import bed texture from (PNG/SVG):"
|
||
msgstr "Choose a file to import bed texture from (PNG/SVG):"
|
||
|
||
#, c-format, boost-format
|
||
msgid "The file exceeds %d MB, please import again."
|
||
msgstr "The file exceeds %d MB, please import again."
|
||
|
||
msgid "Exception in obtaining file size, please import again."
|
||
msgstr "Exception in obtaining file size, please import again."
|
||
|
||
msgid "Choose an STL file to import bed model from:"
|
||
msgstr "Choose an STL file to import bed model from:"
|
||
|
||
msgid "Bed Shape"
|
||
msgstr "Bed Shape"
|
||
|
||
msgid ""
|
||
"The recommended minimum temperature is less than 190 degree or the "
|
||
"recommended maximum temperature is greater than 300 degree.\n"
|
||
msgstr ""
|
||
"The recommended minimum temperature is less than 190 degree or the "
|
||
"recommended maximum temperature is greater than 300 degree.\n"
|
||
|
||
msgid ""
|
||
"The recommended minimum temperature cannot be higher than the recommended "
|
||
"maximum temperature.\n"
|
||
msgstr ""
|
||
"The recommended minimum temperature cannot be higher than the recommended "
|
||
"maximum temperature.\n"
|
||
|
||
msgid "Please check.\n"
|
||
msgstr "Please check.\n"
|
||
|
||
msgid ""
|
||
"Nozzle may be blocked when the temperature is out of recommended range.\n"
|
||
"Please confirm whether to use the temperature for printing.\n"
|
||
"\n"
|
||
msgstr ""
|
||
"Nozzle may be blocked when the temperature is out of recommended range.\n"
|
||
"Please confirm in order to use the temperature for printing.\n"
|
||
"\n"
|
||
|
||
#, c-format, boost-format
|
||
msgid ""
|
||
"Recommended nozzle temperature of this filament type is [%d, %d] degree "
|
||
"centigrade"
|
||
msgstr ""
|
||
"The recommended nozzle temperature for this filament type is [%d, %d] "
|
||
"degrees centigrade"
|
||
|
||
msgid ""
|
||
"Too small max volumetric speed.\n"
|
||
"Reset to 0.5"
|
||
msgstr ""
|
||
"Too small max volumetric speed.\n"
|
||
"Reset to 0.5"
|
||
|
||
#, c-format, boost-format
|
||
msgid ""
|
||
"Current chamber temperature is higher than the material's safe temperature,"
|
||
"it may result in material softening and clogging.The maximum safe "
|
||
"temperature for the material is %d"
|
||
msgstr ""
|
||
"Current chamber temperature is higher than the material's safe temperature; "
|
||
"this may result in material softening and nozzle clogs.The maximum safe "
|
||
"temperature for the material is %d"
|
||
|
||
msgid ""
|
||
"Too small layer height.\n"
|
||
"Reset to 0.2"
|
||
msgstr ""
|
||
"Too small layer height.\n"
|
||
"Reset to 0.2"
|
||
|
||
msgid ""
|
||
"Too large layer height.\n"
|
||
"Reset to 0.2"
|
||
msgstr ""
|
||
"Too large layer height.\n"
|
||
"Reset to 0.2"
|
||
|
||
msgid ""
|
||
"Too small scarf start height.\n"
|
||
"Reset to 50%"
|
||
msgstr ""
|
||
"Too small scarf start height.\n"
|
||
"Reset to 50%"
|
||
|
||
msgid ""
|
||
"Too big scarf start height.\n"
|
||
"Reset to 50%"
|
||
msgstr ""
|
||
"Too big scarf start height.\n"
|
||
"Reset to 50%"
|
||
|
||
msgid ""
|
||
"Too small ironing spacing.\n"
|
||
"Reset to 0.1"
|
||
msgstr ""
|
||
"Too small ironing spacing.\n"
|
||
"Reset to 0.1"
|
||
|
||
msgid ""
|
||
"Zero initial layer height is invalid.\n"
|
||
"\n"
|
||
"The first layer height will be reset to 0.2."
|
||
msgstr ""
|
||
"Zero initial layer height is invalid.\n"
|
||
"\n"
|
||
"The first layer height will be reset to 0.2."
|
||
|
||
msgid ""
|
||
"This setting is only used for model size tuning with small value in some "
|
||
"cases.\n"
|
||
"For example, when the model size has slight errors and is difficult be "
|
||
"assembled.\n"
|
||
"For large size tuning, please use model scaling function.\n"
|
||
"\n"
|
||
"The value will be reset to 0."
|
||
msgstr ""
|
||
"This setting is only used for model size tuning with small values in some "
|
||
"cases.\n"
|
||
"For example, when the model size has slight errors and assembly is "
|
||
"difficult.\n"
|
||
"For large size tuning, please use the model scaling function.\n"
|
||
"\n"
|
||
"The value will be reset to 0."
|
||
|
||
msgid ""
|
||
"Too large elephant foot compensation is unreasonable.\n"
|
||
"If really have serious elephant foot effect, please check other settings.\n"
|
||
"For example, whether bed temperature is too high.\n"
|
||
"\n"
|
||
"The value will be reset to 0."
|
||
msgstr ""
|
||
"Too large an elephant foot compensation is a problem.\n"
|
||
"For very serious elephant foot effects, please check other settings.\n"
|
||
"For example, bed temperature may be too high.\n"
|
||
"\n"
|
||
"The value will be reset to 0."
|
||
|
||
msgid ""
|
||
"Prime tower does not work when Adaptive Layer Height or Independent Support "
|
||
"Layer Height is on.\n"
|
||
"Which do you want to keep?\n"
|
||
"YES - Keep Prime Tower\n"
|
||
"NO - Keep Adaptive Layer Height and Independent Support Layer Height"
|
||
msgstr ""
|
||
"Prime tower does not work when Adaptive Layer Height or Independent Support "
|
||
"Layer Height is on.\n"
|
||
"Which do you want to keep?\n"
|
||
"YES - Keep Prime Tower\n"
|
||
"NO - Keep Adaptive Layer Height and Independent Support Layer Height"
|
||
|
||
msgid ""
|
||
"Prime tower does not work when Adaptive Layer Height is on.\n"
|
||
"Which do you want to keep?\n"
|
||
"YES - Keep Prime Tower\n"
|
||
"NO - Keep Adaptive Layer Height"
|
||
msgstr ""
|
||
"Prime tower does not work when Adaptive Layer Height is on.\n"
|
||
"Which do you want to keep?\n"
|
||
"YES - Keep Prime Tower\n"
|
||
"NO - Keep Adaptive Layer Height"
|
||
|
||
msgid ""
|
||
"Prime tower does not work when Independent Support Layer Height is on.\n"
|
||
"Which do you want to keep?\n"
|
||
"YES - Keep Prime Tower\n"
|
||
"NO - Keep Independent Support Layer Height"
|
||
msgstr ""
|
||
"Prime tower does not work when Independent Support Layer Height is on.\n"
|
||
"Which do you want to keep?\n"
|
||
"YES - Keep Prime Tower\n"
|
||
"NO - Keep Independent Support Layer Height"
|
||
|
||
#, boost-format
|
||
msgid "%1% infill pattern doesn't support 100%% density."
|
||
msgstr "%1% infill pattern doesn't support 100%% density."
|
||
|
||
msgid ""
|
||
"Switch to rectilinear pattern?\n"
|
||
"Yes - switch to rectilinear pattern automatically\n"
|
||
"No - reset density to default non 100% value automatically"
|
||
msgstr ""
|
||
"Switch to rectilinear pattern?\n"
|
||
"Yes - switch to rectilinear pattern\n"
|
||
"No - reset density to default non 100% value"
|
||
|
||
msgid ""
|
||
"While printing by Object, the extruder may collide skirt.\n"
|
||
"Thus, reset the skirt layer to 1 to avoid that."
|
||
msgstr ""
|
||
"While printing by Object, the extruder may collide skirt.\n"
|
||
"Thus, reset the skirt layer to 1 to avoid that."
|
||
|
||
msgid ""
|
||
"Spiral mode only works when wall loops is 1, support is disabled, top shell "
|
||
"layers is 0, sparse infill density is 0 and timelapse type is traditional."
|
||
msgstr ""
|
||
"Spiral mode only works when wall loops is 1, support is disabled, top shell "
|
||
"layers is 0, sparse infill density is 0 and timelapse type is traditional."
|
||
|
||
msgid " But machines with I3 structure will not generate timelapse videos."
|
||
msgstr " But machines with I3 structure will not generate timelapse videos."
|
||
|
||
msgid ""
|
||
"Change these settings automatically? \n"
|
||
"Yes - Change these settings and enable spiral mode automatically\n"
|
||
"No - Give up using spiral mode this time"
|
||
msgstr ""
|
||
"Change these settings automatically? \n"
|
||
"Yes - Change these settings and enable spiral/vase mode automatically\n"
|
||
"No - Cancel enabling spiral mode"
|
||
|
||
msgid "Auto bed leveling"
|
||
msgstr "Auto bed leveling"
|
||
|
||
msgid "Heatbed preheating"
|
||
msgstr "Heatbed preheating"
|
||
|
||
msgid "Sweeping XY mech mode"
|
||
msgstr "Sweeping XY mech mode"
|
||
|
||
msgid "Changing filament"
|
||
msgstr "Changing filament"
|
||
|
||
msgid "M400 pause"
|
||
msgstr "M400 pause"
|
||
|
||
msgid "Paused due to filament runout"
|
||
msgstr "Paused due to filament runout"
|
||
|
||
msgid "Heating hotend"
|
||
msgstr "Heating hotend"
|
||
|
||
msgid "Calibrating extrusion"
|
||
msgstr "Calibrating extrusion"
|
||
|
||
msgid "Scanning bed surface"
|
||
msgstr "Scanning bed surface"
|
||
|
||
msgid "Inspecting first layer"
|
||
msgstr "Inspecting first layer"
|
||
|
||
msgid "Identifying build plate type"
|
||
msgstr "Identifying build plate type"
|
||
|
||
msgid "Calibrating Micro Lidar"
|
||
msgstr "Calibrating Micro Lidar"
|
||
|
||
msgid "Homing toolhead"
|
||
msgstr "Homing toolhead"
|
||
|
||
msgid "Cleaning nozzle tip"
|
||
msgstr "Cleaning nozzle tip"
|
||
|
||
msgid "Checking extruder temperature"
|
||
msgstr "Checking extruder temperature"
|
||
|
||
msgid "Printing was paused by the user"
|
||
msgstr "Printing was paused by the user"
|
||
|
||
msgid "Pause of front cover falling"
|
||
msgstr "Pause of front cover falling"
|
||
|
||
msgid "Calibrating the micro lida"
|
||
msgstr "Calibrating the micro lidar"
|
||
|
||
msgid "Calibrating extrusion flow"
|
||
msgstr "Calibrating extrusion flow"
|
||
|
||
msgid "Paused due to nozzle temperature malfunction"
|
||
msgstr "Paused due to nozzle temperature malfunction"
|
||
|
||
msgid "Paused due to heat bed temperature malfunction"
|
||
msgstr "Paused due to heat bed temperature malfunction"
|
||
|
||
msgid "Filament unloading"
|
||
msgstr "Filament unloading"
|
||
|
||
msgid "Skip step pause"
|
||
msgstr "Skip step pause"
|
||
|
||
msgid "Filament loading"
|
||
msgstr "Filament loading"
|
||
|
||
msgid "Motor noise calibration"
|
||
msgstr "Motor noise calibration"
|
||
|
||
msgid "Paused due to AMS lost"
|
||
msgstr "Paused due to AMS lost"
|
||
|
||
msgid "Paused due to low speed of the heat break fan"
|
||
msgstr "Paused due to low speed of the heat break fan"
|
||
|
||
msgid "Paused due to chamber temperature control error"
|
||
msgstr "Paused due to chamber temperature control error"
|
||
|
||
msgid "Cooling chamber"
|
||
msgstr "Cooling chamber"
|
||
|
||
msgid "Paused by the Gcode inserted by user"
|
||
msgstr "Paused by the Gcode inserted by user"
|
||
|
||
msgid "Motor noise showoff"
|
||
msgstr "Motor noise showoff"
|
||
|
||
msgid "Nozzle filament covered detected pause"
|
||
msgstr "Nozzle filament covered detected pause"
|
||
|
||
msgid "Cutter error pause"
|
||
msgstr "Cutter error pause"
|
||
|
||
msgid "First layer error pause"
|
||
msgstr "First layer error pause"
|
||
|
||
msgid "Nozzle clog pause"
|
||
msgstr "Nozzle clog pause"
|
||
|
||
msgid "Unknown"
|
||
msgstr "Unknown"
|
||
|
||
msgid "Fatal"
|
||
msgstr "Fatal"
|
||
|
||
msgid "Serious"
|
||
msgstr "Serious"
|
||
|
||
msgid "Common"
|
||
msgstr "Common"
|
||
|
||
msgid "Update successful."
|
||
msgstr "Update successful."
|
||
|
||
msgid "Downloading failed."
|
||
msgstr "Downloading failed."
|
||
|
||
msgid "Verification failed."
|
||
msgstr "Verification failed."
|
||
|
||
msgid "Update failed."
|
||
msgstr "Update failed."
|
||
|
||
msgid ""
|
||
"The current chamber temperature or the target chamber temperature exceeds "
|
||
"45℃.In order to avoid extruder clogging,low temperature filament(PLA/PETG/"
|
||
"TPU) is not allowed to be loaded."
|
||
msgstr ""
|
||
"The current chamber temperature or the target chamber temperature exceeds "
|
||
"45℃. In order to avoid extruder clogging, low temperature filament (PLA/PETG/"
|
||
"TPU) is not allowed to be loaded."
|
||
|
||
msgid ""
|
||
"Low temperature filament(PLA/PETG/TPU) is loaded in the extruder.In order to "
|
||
"avoid extruder clogging,it is not allowed to set the chamber temperature "
|
||
"above 45℃."
|
||
msgstr ""
|
||
"Low temperature filament (PLA/PETG/TPU) is loaded in the extruder. In order "
|
||
"to avoid extruder clogging, it is not allowed to set the chamber temperature "
|
||
"above 45℃."
|
||
|
||
msgid ""
|
||
"When you set the chamber temperature below 40℃, the chamber temperature "
|
||
"control will not be activated. And the target chamber temperature will "
|
||
"automatically be set to 0℃."
|
||
msgstr ""
|
||
"When you set the chamber temperature below 40℃, the chamber temperature "
|
||
"control will not be activated, and the target chamber temperature will "
|
||
"automatically be set to 0℃."
|
||
|
||
msgid "Failed to start printing job"
|
||
msgstr "Failed to start printing job"
|
||
|
||
msgid ""
|
||
"This calibration does not support the currently selected nozzle diameter"
|
||
msgstr ""
|
||
"This calibration does not support the currently selected nozzle diameter"
|
||
|
||
msgid "Current flowrate cali param is invalid"
|
||
msgstr "Current flowrate cali param is invalid"
|
||
|
||
msgid "Selected diameter and machine diameter do not match"
|
||
msgstr "Selected diameter and machine diameter do not match"
|
||
|
||
msgid "Failed to generate cali gcode"
|
||
msgstr "Failed to generate cali gcode"
|
||
|
||
msgid "Calibration error"
|
||
msgstr "Calibration error"
|
||
|
||
msgid "TPU is not supported by AMS."
|
||
msgstr "TPU is not supported by AMS."
|
||
|
||
msgid "QIDI PET-CF/PA6-CF is not supported by AMS."
|
||
msgstr "QIDI PET-CF/PA6-CF is not supported by AMS."
|
||
|
||
msgid ""
|
||
"Damp PVA will become flexible and get stuck inside AMS,please take care to "
|
||
"dry it before use."
|
||
msgstr ""
|
||
"Damp PVA will become flexible and get stuck inside AMS,please take care to "
|
||
"dry it before use."
|
||
|
||
msgid ""
|
||
"CF/GF filaments are hard and brittle, It's easy to break or get stuck in "
|
||
"AMS, please use with caution."
|
||
msgstr ""
|
||
"CF/GF filaments are hard and brittle, It's easy to break or get stuck in "
|
||
"AMS, please use with caution."
|
||
|
||
msgid "default"
|
||
msgstr "default"
|
||
|
||
msgid "parameter name"
|
||
msgstr "parameter name"
|
||
|
||
msgid "N/A"
|
||
msgstr "N/A"
|
||
|
||
#, c-format, boost-format
|
||
msgid "%s can't be percentage"
|
||
msgstr "%s can't be percentage"
|
||
|
||
#, c-format, boost-format
|
||
msgid "Value %s is out of range, continue?"
|
||
msgstr "Value %s is out of range, continue?"
|
||
|
||
msgid "Parameter validation"
|
||
msgstr "Parameter validation"
|
||
|
||
#, c-format, boost-format
|
||
msgid "Value %s is out of range. The valid range is from %d to %d."
|
||
msgstr "Value %s is out of range. The valid range is from %d to %d."
|
||
|
||
msgid "Value is out of range."
|
||
msgstr "Value is out of range."
|
||
|
||
#, c-format, boost-format
|
||
msgid ""
|
||
"Is it %s%% or %s %s?\n"
|
||
"YES for %s%%, \n"
|
||
"NO for %s %s."
|
||
msgstr ""
|
||
"Is it %s%% or %s %s?\n"
|
||
"YES for %s%%, \n"
|
||
"NO for %s %s."
|
||
|
||
#, boost-format
|
||
msgid "Invalid format. Expected vector format: \"%1%\""
|
||
msgstr "Invalid format. Expected vector format: \"%1%\""
|
||
|
||
msgid "Layer Height"
|
||
msgstr "Layer Height"
|
||
|
||
msgid "Line Width"
|
||
msgstr "Line Width"
|
||
|
||
msgid "Fan Speed"
|
||
msgstr "Fan Speed"
|
||
|
||
msgid "Temperature"
|
||
msgstr "Temperature"
|
||
|
||
msgid "Flow"
|
||
msgstr "Flow"
|
||
|
||
msgid "Tool"
|
||
msgstr "Tool"
|
||
|
||
msgid "Layer Time"
|
||
msgstr "Layer Time"
|
||
|
||
msgid "Height: "
|
||
msgstr "Height: "
|
||
|
||
msgid "Width: "
|
||
msgstr "Width: "
|
||
|
||
msgid "Speed: "
|
||
msgstr "Speed: "
|
||
|
||
msgid "Flow: "
|
||
msgstr "Flow: "
|
||
|
||
msgid "Layer Time: "
|
||
msgstr "Layer Time: "
|
||
|
||
msgid "Fan Speed: "
|
||
msgstr "Fan Speed: "
|
||
|
||
msgid "Temperature: "
|
||
msgstr "Temperature: "
|
||
|
||
msgid "Loading G-codes"
|
||
msgstr "Loading G-code"
|
||
|
||
msgid "Generating geometry vertex data"
|
||
msgstr "Generating geometry vertex data"
|
||
|
||
msgid "Generating geometry index data"
|
||
msgstr "Generating geometry index data"
|
||
|
||
msgid "Statistics of All Plates"
|
||
msgstr "Statistics of All Plates"
|
||
|
||
msgid "Display"
|
||
msgstr "Display"
|
||
|
||
msgid "Flushed"
|
||
msgstr "Flushed"
|
||
|
||
msgid "Tower"
|
||
msgstr "Tower"
|
||
|
||
msgid "Total"
|
||
msgstr "Total"
|
||
|
||
msgid "Total Estimation"
|
||
msgstr "Total Estimation"
|
||
|
||
msgid "Total time"
|
||
msgstr "Total time"
|
||
|
||
msgid "Total cost"
|
||
msgstr "Total cost"
|
||
|
||
msgid "up to"
|
||
msgstr "up to"
|
||
|
||
msgid "above"
|
||
msgstr "above"
|
||
|
||
msgid "from"
|
||
msgstr "from"
|
||
|
||
msgid "Color Scheme"
|
||
msgstr "Color Scheme"
|
||
|
||
msgid "Time"
|
||
msgstr "Time"
|
||
|
||
msgid "Percent"
|
||
msgstr "Percent"
|
||
|
||
msgid "Used filament"
|
||
msgstr "Used filament"
|
||
|
||
msgid "Layer Height (mm)"
|
||
msgstr "Layer Height (mm)"
|
||
|
||
msgid "Line Width (mm)"
|
||
msgstr "Line Width (mm)"
|
||
|
||
msgid "Speed (mm/s)"
|
||
msgstr "Speed (mm/s)"
|
||
|
||
msgid "Fan Speed (%)"
|
||
msgstr "Fan Speed (%)"
|
||
|
||
msgid "Temperature (°C)"
|
||
msgstr "Temperature (°C)"
|
||
|
||
msgid "Volumetric flow rate (mm³/s)"
|
||
msgstr "Volumetric flow rate (mm³/s)"
|
||
|
||
msgid "Layer Time (s)"
|
||
msgstr "Layer Time (s)"
|
||
|
||
msgid "Travel"
|
||
msgstr "Travel"
|
||
|
||
msgid "Seams"
|
||
msgstr "Seams"
|
||
|
||
msgid "Retract"
|
||
msgstr "Retract"
|
||
|
||
msgid "Unretract"
|
||
msgstr "Unretract"
|
||
|
||
msgid "Filament Changes"
|
||
msgstr "Filament Changes"
|
||
|
||
msgid "Wipe"
|
||
msgstr "Wipe"
|
||
|
||
msgid "Options"
|
||
msgstr "Options"
|
||
|
||
msgid "travel"
|
||
msgstr "travel"
|
||
|
||
msgid "Extruder"
|
||
msgstr "Extruder"
|
||
|
||
msgid "Filament change times"
|
||
msgstr "Filament change times"
|
||
|
||
msgid "Cost"
|
||
msgstr "Cost"
|
||
|
||
msgid "Color change"
|
||
msgstr "Color change"
|
||
|
||
msgid "Print"
|
||
msgstr "Print"
|
||
|
||
msgid "Printer"
|
||
msgstr "Printer"
|
||
|
||
msgid "Print settings"
|
||
msgstr "Print settings"
|
||
|
||
msgid "Time Estimation"
|
||
msgstr "Time Estimation"
|
||
|
||
msgid "Normal mode"
|
||
msgstr "Normal mode"
|
||
|
||
msgid "Total Filament"
|
||
msgstr "Total Filament"
|
||
|
||
msgid "Model Filament"
|
||
msgstr "Model Filament"
|
||
|
||
msgid "Prepare time"
|
||
msgstr "Prepare time"
|
||
|
||
msgid "Model printing time"
|
||
msgstr "Model printing time"
|
||
|
||
msgid "Switch to silent mode"
|
||
msgstr "Switch to silent mode"
|
||
|
||
msgid "Switch to normal mode"
|
||
msgstr "Switch to normal mode"
|
||
|
||
msgid "Variable layer height"
|
||
msgstr "Variable layer height"
|
||
|
||
msgid "Adaptive"
|
||
msgstr "Adaptive"
|
||
|
||
msgid "Quality / Speed"
|
||
msgstr "Quality / Speed"
|
||
|
||
msgid "Smooth"
|
||
msgstr "Smooth"
|
||
|
||
msgid "Radius"
|
||
msgstr "Radius"
|
||
|
||
msgid "Keep min"
|
||
msgstr "Keep min"
|
||
|
||
msgid "Left mouse button:"
|
||
msgstr "Left mouse button:"
|
||
|
||
msgid "Add detail"
|
||
msgstr "Add detail"
|
||
|
||
msgid "Right mouse button:"
|
||
msgstr "Right mouse button:"
|
||
|
||
msgid "Remove detail"
|
||
msgstr "Remove detail"
|
||
|
||
msgid "Shift + Left mouse button:"
|
||
msgstr "Shift + Left mouse button:"
|
||
|
||
msgid "Reset to base"
|
||
msgstr "Reset to base"
|
||
|
||
msgid "Shift + Right mouse button:"
|
||
msgstr "Shift + Right mouse button:"
|
||
|
||
msgid "Smoothing"
|
||
msgstr "Smoothing"
|
||
|
||
msgid "Mouse wheel:"
|
||
msgstr "Mouse wheel:"
|
||
|
||
msgid "Increase/decrease edit area"
|
||
msgstr "Increase/decrease edit area"
|
||
|
||
msgid "Sequence"
|
||
msgstr "Sequence"
|
||
|
||
msgid "object selection"
|
||
msgstr ""
|
||
|
||
msgid "part selection"
|
||
msgstr ""
|
||
|
||
msgid "number keys"
|
||
msgstr ""
|
||
|
||
msgid "number keys can quickly change the color of objects"
|
||
msgstr ""
|
||
|
||
msgid "Mirror Object"
|
||
msgstr "Mirror Object"
|
||
|
||
msgid "Tool Move"
|
||
msgstr "Tool Move"
|
||
|
||
msgid "Tool Rotate"
|
||
msgstr "Tool Rotate"
|
||
|
||
msgid "Move Object"
|
||
msgstr "Move Object"
|
||
|
||
msgid "Auto Orientation options"
|
||
msgstr "Auto Orientation options"
|
||
|
||
msgid "Enable rotation"
|
||
msgstr "Enable rotation"
|
||
|
||
msgid "Optimize support interface area"
|
||
msgstr "Optimize support interface area"
|
||
|
||
msgid "Orient"
|
||
msgstr "Orient"
|
||
|
||
msgid "Arrange options"
|
||
msgstr "Arrange options"
|
||
|
||
msgid "Spacing"
|
||
msgstr "Spacing"
|
||
|
||
msgid "0 means auto spacing."
|
||
msgstr "0 means auto spacing."
|
||
|
||
msgid "Auto rotate for arrangement"
|
||
msgstr "Auto rotate for arrangement"
|
||
|
||
msgid "Allow multiple materials on same plate"
|
||
msgstr "Allow multiple materials on same plate"
|
||
|
||
msgid "Avoid extrusion calibration region"
|
||
msgstr "Avoid extrusion calibration region"
|
||
|
||
msgid "Align to Y axis"
|
||
msgstr "Align to Y axis"
|
||
|
||
msgid "Add"
|
||
msgstr "Add"
|
||
|
||
msgid "Add plate"
|
||
msgstr "Add Plate"
|
||
|
||
msgid "Auto orient"
|
||
msgstr "Auto Orient"
|
||
|
||
msgid "Arrange all objects"
|
||
msgstr "Arrange all objects"
|
||
|
||
msgid "Arrange objects on selected plates"
|
||
msgstr "Arrange objects on selected plates"
|
||
|
||
msgid "Split to objects"
|
||
msgstr "Split to Objects"
|
||
|
||
msgid ""
|
||
"And it is valid when there are at least two parts in object or stl has at "
|
||
"least two meshes."
|
||
msgstr ""
|
||
"And it is valid when there are at least two parts in object or stl has at "
|
||
"least two meshes."
|
||
|
||
msgid "Split to parts"
|
||
msgstr "Split to Parts"
|
||
|
||
msgid "And it is valid when importing an stl with at least two meshes."
|
||
msgstr "And it is valid when importing an stl with at least two meshes."
|
||
|
||
msgid "Assembly View"
|
||
msgstr "Assembly View"
|
||
|
||
msgid "Select Plate"
|
||
msgstr "Select Plate"
|
||
|
||
msgid "Assembly Return"
|
||
msgstr "Assembly Return"
|
||
|
||
msgid "return"
|
||
msgstr "return"
|
||
|
||
msgid "Paint Toolbar"
|
||
msgstr "Paint Toolbar"
|
||
|
||
msgid "Explosion Ratio"
|
||
msgstr "Explosion Ratio"
|
||
|
||
msgid "Section View"
|
||
msgstr "Section View"
|
||
|
||
msgid "Assemble Control"
|
||
msgstr "Assemble Control"
|
||
|
||
msgid "Total Volume:"
|
||
msgstr "Total Volume:"
|
||
|
||
msgid "Assembly Info"
|
||
msgstr "Assembly Info"
|
||
|
||
msgid "Volume:"
|
||
msgstr "Volume:"
|
||
|
||
msgid "Size:"
|
||
msgstr "Size:"
|
||
|
||
#, c-format, boost-format
|
||
msgid ""
|
||
"Conflicts of gcode paths have been found at layer %d. Please separate the "
|
||
"conflicted objects farther (%s <-> %s)."
|
||
msgstr ""
|
||
"Conflicts of gcode paths have been found at layer %d. Please separate the "
|
||
"conflicted objects farther (%s <-> %s)."
|
||
|
||
msgid "An object is layed over the boundary of plate."
|
||
msgstr "An object is laid over the boundary of the plate."
|
||
|
||
msgid "A G-code path goes beyond the max print height."
|
||
msgstr "A G-code path goes beyond the max print height."
|
||
|
||
msgid "A G-code path goes beyond the boundary of plate."
|
||
msgstr "A G-code path goes beyond plate boundaries."
|
||
|
||
msgid "Only the object being edited is visible."
|
||
msgstr "Only the object being edited is visible."
|
||
|
||
msgid ""
|
||
"An object is laid over the boundary of plate or exceeds the height limit.\n"
|
||
"Please solve the problem by moving it totally on or off the plate, and "
|
||
"confirming that the height is within the build volume."
|
||
msgstr ""
|
||
"An object is laid over the boundary of plate or exceeds the height limit.\n"
|
||
"Please solve the problem by moving it totally on or off the plate, and "
|
||
"confirming that the height is within the build volume."
|
||
|
||
msgid "Calibration step selection"
|
||
msgstr "Calibration step selection"
|
||
|
||
msgid "Micro lidar calibration"
|
||
msgstr "Micro lidar calibration"
|
||
|
||
msgid "Bed leveling"
|
||
msgstr "Bed leveling"
|
||
|
||
msgid "Vibration compensation"
|
||
msgstr "Vibration compensation"
|
||
|
||
msgid "Motor noise cancellation"
|
||
msgstr "Motor noise cancellation"
|
||
|
||
msgid "Calibration program"
|
||
msgstr "Calibration program"
|
||
|
||
msgid ""
|
||
"The calibration program detects the status of your device automatically to "
|
||
"minimize deviation.\n"
|
||
"It keeps the device performing optimally."
|
||
msgstr ""
|
||
"The calibration program detects the status of your device automatically to "
|
||
"minimize deviation.\n"
|
||
"It keeps the device performing optimally."
|
||
|
||
msgid "Calibration Flow"
|
||
msgstr "Calibration Flow"
|
||
|
||
msgid "Start Calibration"
|
||
msgstr "Start Calibration"
|
||
|
||
msgid "Completed"
|
||
msgstr "Completed"
|
||
|
||
msgid "Calibrating"
|
||
msgstr "Calibrating"
|
||
|
||
msgid "No step selected"
|
||
msgstr "No step selected"
|
||
|
||
msgid "Auto-record Monitoring"
|
||
msgstr "Auto-record Monitoring"
|
||
|
||
msgid "Go Live"
|
||
msgstr "Go Live"
|
||
|
||
msgid "Liveview Retry"
|
||
msgstr "Liveview Retry"
|
||
|
||
msgid "Resolution"
|
||
msgstr "Resolution"
|
||
|
||
msgid "Show \"Live Video\" guide page."
|
||
msgstr "Show \"Live Video\" guide page."
|
||
|
||
msgid "ConnectPrinter(LAN)"
|
||
msgstr "Connect Printer (LAN)"
|
||
|
||
msgid "Please input the printer access code:"
|
||
msgstr "Please input the printer access code:"
|
||
|
||
msgid ""
|
||
"You can find it in \"Settings > Network > Connection code\"\n"
|
||
"on the printer, as shown in the figure:"
|
||
msgstr ""
|
||
"You can find it in \"Settings > Network > Access code\"\n"
|
||
"on the printer, as shown in the figure:"
|
||
|
||
msgid "Invalid input."
|
||
msgstr "Invalid input."
|
||
|
||
msgid "New Window"
|
||
msgstr "New Window"
|
||
|
||
msgid "Open a new window"
|
||
msgstr "Open a new window"
|
||
|
||
msgid "Application is closing"
|
||
msgstr "Application is closing"
|
||
|
||
msgid "Closing Application while some presets are modified."
|
||
msgstr "Closing Application while some presets are modified."
|
||
|
||
msgid "Logging"
|
||
msgstr "Logging"
|
||
|
||
msgid "Prepare"
|
||
msgstr "Prepare"
|
||
|
||
msgid "Preview"
|
||
msgstr "Preview"
|
||
|
||
msgid "Device"
|
||
msgstr "Device"
|
||
|
||
msgid "Multi-device"
|
||
msgstr "Multi-device"
|
||
|
||
msgid "Project"
|
||
msgstr "Project"
|
||
|
||
msgid "Yes"
|
||
msgstr "Yes"
|
||
|
||
msgid "No"
|
||
msgstr "No"
|
||
|
||
msgid "will be closed before creating a new model. Do you want to continue?"
|
||
msgstr "will be closed before creating a new model. Do you want to continue?"
|
||
|
||
msgid "Upload"
|
||
msgstr "Upload"
|
||
|
||
msgid "Slice plate"
|
||
msgstr "Slice plate"
|
||
|
||
msgid "Print plate"
|
||
msgstr "Print plate"
|
||
|
||
msgid "Slice all"
|
||
msgstr "Slice all"
|
||
|
||
msgid "Export G-code file"
|
||
msgstr "Export G-code file"
|
||
|
||
msgid "Send"
|
||
msgstr "Send"
|
||
|
||
msgid "Export plate sliced file"
|
||
msgstr "Export plate sliced file"
|
||
|
||
msgid "Export all sliced file"
|
||
msgstr "Export all sliced file"
|
||
|
||
msgid "Print all"
|
||
msgstr "Print all"
|
||
|
||
msgid "Send all"
|
||
msgstr "Send all"
|
||
|
||
msgid "Send to Multi-device"
|
||
msgstr "Send to Multi-device"
|
||
|
||
msgid "Keyboard Shortcuts"
|
||
msgstr "Keyboard Shortcuts"
|
||
|
||
msgid "Show the list of the keyboard shortcuts"
|
||
msgstr "Show the list of keyboard shortcuts"
|
||
|
||
msgid "Setup Wizard"
|
||
msgstr "Setup Wizard"
|
||
|
||
msgid "Show Configuration Folder"
|
||
msgstr "Show Configuration Folder"
|
||
|
||
msgid "Show Tip of the Day"
|
||
msgstr "Show Tip of the Day"
|
||
|
||
msgid "Report issue"
|
||
msgstr "Report issue"
|
||
|
||
msgid "Check for Update"
|
||
msgstr "Check for Updates"
|
||
|
||
msgid "Open Network Test"
|
||
msgstr "Open Network Test"
|
||
|
||
#, c-format, boost-format
|
||
msgid "&About %s"
|
||
msgstr "&About %s"
|
||
|
||
msgid "Upload Models"
|
||
msgstr "Upload Models"
|
||
|
||
msgid "Download Models"
|
||
msgstr "Download Models"
|
||
|
||
msgid "Default View"
|
||
msgstr "Default View"
|
||
|
||
#. TRN To be shown in the main menu View->Top
|
||
msgid "Top"
|
||
msgstr "Top"
|
||
|
||
msgid "Top View"
|
||
msgstr "Top View"
|
||
|
||
#. TRN To be shown in the main menu View->Bottom
|
||
msgid "Bottom"
|
||
msgstr "Bottom"
|
||
|
||
msgid "Bottom View"
|
||
msgstr "Bottom View"
|
||
|
||
msgid "Front"
|
||
msgstr "Front"
|
||
|
||
msgid "Front View"
|
||
msgstr "Front View"
|
||
|
||
msgid "Rear"
|
||
msgstr "Rear"
|
||
|
||
msgid "Rear View"
|
||
msgstr "Rear View"
|
||
|
||
msgid "Left"
|
||
msgstr "Left"
|
||
|
||
msgid "Left View"
|
||
msgstr "Left View"
|
||
|
||
msgid "Right"
|
||
msgstr "Right"
|
||
|
||
msgid "Right View"
|
||
msgstr "Right View"
|
||
|
||
msgid "Start a new window"
|
||
msgstr "Start a new window"
|
||
|
||
msgid "New Project"
|
||
msgstr "New Project"
|
||
|
||
msgid "Start a new project"
|
||
msgstr "Start a new project"
|
||
|
||
msgid "Open a project file"
|
||
msgstr "Open a project file"
|
||
|
||
msgid "Recent projects"
|
||
msgstr "Recent projects"
|
||
|
||
msgid "Save Project"
|
||
msgstr "Save Project"
|
||
|
||
msgid "Save current project to file"
|
||
msgstr "Save current project to file"
|
||
|
||
msgid "Save Project as"
|
||
msgstr "Save Project as"
|
||
|
||
msgid "Shift+"
|
||
msgstr "Shift+"
|
||
|
||
msgid "Save current project as"
|
||
msgstr "Save current project as"
|
||
|
||
msgid "Import 3MF/STL/STEP/SVG/OBJ/AMF"
|
||
msgstr "Import 3MF/STL/STEP/SVG/OBJ/AMF"
|
||
|
||
msgid "Load a model"
|
||
msgstr "Load a model"
|
||
|
||
msgid "Import Configs"
|
||
msgstr "Import Configs"
|
||
|
||
msgid "Load configs"
|
||
msgstr "Load configs"
|
||
|
||
msgid "Import"
|
||
msgstr "Import"
|
||
|
||
msgid "Export all objects as one STL"
|
||
msgstr "Export all objects as one STL"
|
||
|
||
msgid "Export all objects as STLs"
|
||
msgstr "Export all objects as STLs"
|
||
|
||
msgid "Export Generic 3MF"
|
||
msgstr "Export Generic 3MF"
|
||
|
||
msgid "Export 3mf file without using some 3mf-extensions"
|
||
msgstr "Export 3mf file without using some 3mf-extensions"
|
||
|
||
msgid "Export current sliced file"
|
||
msgstr "Export current sliced file"
|
||
|
||
msgid "Export all plate sliced file"
|
||
msgstr "Export all plate sliced file"
|
||
|
||
msgid "Export G-code"
|
||
msgstr "Export G-code"
|
||
|
||
msgid "Export current plate as G-code"
|
||
msgstr "Export current plate as G-code"
|
||
|
||
msgid "Export Preset Bundle"
|
||
msgstr ""
|
||
|
||
msgid "Export current configuration to files"
|
||
msgstr "Export current configuration to files"
|
||
|
||
msgid "Export"
|
||
msgstr "Export"
|
||
|
||
msgid "Quit"
|
||
msgstr "Quit"
|
||
|
||
msgid "Undo"
|
||
msgstr "Undo"
|
||
|
||
msgid "Redo"
|
||
msgstr "Redo"
|
||
|
||
msgid "Cut selection to clipboard"
|
||
msgstr "Cut selection to clipboard"
|
||
|
||
msgid "Copy"
|
||
msgstr "Copy"
|
||
|
||
msgid "Copy selection to clipboard"
|
||
msgstr "Copy selection to clipboard"
|
||
|
||
msgid "Paste"
|
||
msgstr "Paste"
|
||
|
||
msgid "Paste clipboard"
|
||
msgstr "Paste clipboard"
|
||
|
||
msgid "Delete selected"
|
||
msgstr "Delete selected"
|
||
|
||
msgid "Deletes the current selection"
|
||
msgstr "Deletes the current selection"
|
||
|
||
msgid "Delete all"
|
||
msgstr "Delete all"
|
||
|
||
msgid "Deletes all objects"
|
||
msgstr "Deletes all objects"
|
||
|
||
msgid "Clone selected"
|
||
msgstr "Clone selected"
|
||
|
||
msgid "Clone copies of selections"
|
||
msgstr "Clone copies of selections"
|
||
|
||
msgid "Select all"
|
||
msgstr "Select all"
|
||
|
||
msgid "Selects all objects"
|
||
msgstr "Selects all objects"
|
||
|
||
msgid "Deselect all"
|
||
msgstr "Deselect all"
|
||
|
||
msgid "Deselects all objects"
|
||
msgstr "Deselects all objects"
|
||
|
||
msgid "Use Perspective View"
|
||
msgstr "Use Perspective View"
|
||
|
||
msgid "Use Orthogonal View"
|
||
msgstr "Use Orthogonal View"
|
||
|
||
msgid "Show &Labels"
|
||
msgstr "Show &Labels"
|
||
|
||
msgid "Show object labels in 3D scene"
|
||
msgstr "Show object labels in 3D scene"
|
||
|
||
msgid "Show &Overhang"
|
||
msgstr "Show &Overhang"
|
||
|
||
msgid "Show object overhang highlight in 3D scene"
|
||
msgstr "Show object overhang highlight in 3D scene"
|
||
|
||
msgid "Services"
|
||
msgstr "Services"
|
||
|
||
msgid "Hide QIDIStudio"
|
||
msgstr "Hide QIDIStudio"
|
||
|
||
msgid "Hide Others"
|
||
msgstr "Hide Others"
|
||
|
||
msgid "Show All"
|
||
msgstr "Show All"
|
||
|
||
msgid "Quit QIDIStudio"
|
||
msgstr "Quit QIDIStudio"
|
||
|
||
msgid "Preferences"
|
||
msgstr "Preferences"
|
||
|
||
msgid "View"
|
||
msgstr "View"
|
||
|
||
msgid "Help"
|
||
msgstr "Help"
|
||
|
||
msgid "Temperature Calibration"
|
||
msgstr "Temperature Calibration"
|
||
|
||
msgid "Pass 1"
|
||
msgstr "Pass 1"
|
||
|
||
msgid "Flow rate test - Pass 1"
|
||
msgstr "Flow rate test - Pass 1"
|
||
|
||
msgid "Pass 2"
|
||
msgstr "Pass 2"
|
||
|
||
msgid "Flow rate test - Pass 2"
|
||
msgstr "Flow rate test - Pass 2"
|
||
|
||
msgid "Flow rate"
|
||
msgstr "Flow rate"
|
||
|
||
msgid "Pressure advance"
|
||
msgstr "Pressure advance"
|
||
|
||
msgid "Retraction test"
|
||
msgstr "Retraction test"
|
||
|
||
msgid "Max flowrate"
|
||
msgstr "Max flowrate"
|
||
|
||
msgid "VFA"
|
||
msgstr "VFA"
|
||
|
||
msgid "More..."
|
||
msgstr "More..."
|
||
|
||
msgid "Tutorial"
|
||
msgstr "Tutorial"
|
||
|
||
msgid "Calibration help"
|
||
msgstr "Calibration help"
|
||
|
||
msgid "More calibrations"
|
||
msgstr "More calibrations"
|
||
|
||
msgid "Window"
|
||
msgstr "Window"
|
||
|
||
msgid "Minimize"
|
||
msgstr "Minimize"
|
||
|
||
msgid "Zoom"
|
||
msgstr "Zoom"
|
||
|
||
msgid "Tile Window to Left of Screen"
|
||
msgstr "Tile Window to Left of Screen"
|
||
|
||
msgid "Tile Window to Right of Screen"
|
||
msgstr "Tile Window to Right of Screen"
|
||
|
||
msgid "Replace Tiled Window"
|
||
msgstr "Replace Tiled Window"
|
||
|
||
msgid "Remove Window from Set"
|
||
msgstr "Remove Window from Set"
|
||
|
||
msgid "Bring All to Front"
|
||
msgstr "Bring All to Front"
|
||
|
||
msgid "&Open G-code"
|
||
msgstr "&Open G-code"
|
||
|
||
msgid "Open a G-code file"
|
||
msgstr "Open a G-code file"
|
||
|
||
msgid "Re&load from Disk"
|
||
msgstr "Re&load from Disk"
|
||
|
||
msgid "Reload the plater from disk"
|
||
msgstr "Reload the plater from disk"
|
||
|
||
msgid "Export &Toolpaths as OBJ"
|
||
msgstr "Export &Toolpaths as OBJ"
|
||
|
||
msgid "Export toolpaths as OBJ"
|
||
msgstr "Export toolpaths as OBJ"
|
||
|
||
msgid "Open &Studio"
|
||
msgstr "Open &Studio"
|
||
|
||
msgid "Open Studio"
|
||
msgstr "Open Studio"
|
||
|
||
msgid "&Quit"
|
||
msgstr "&Quit"
|
||
|
||
#, c-format, boost-format
|
||
msgid "Quit %s"
|
||
msgstr "Quit %s"
|
||
|
||
msgid "&File"
|
||
msgstr "&File"
|
||
|
||
msgid "&View"
|
||
msgstr "&View"
|
||
|
||
msgid "&Help"
|
||
msgstr "&Help"
|
||
|
||
#, c-format, boost-format
|
||
msgid "A file exists with the same name: %s, do you want to override it."
|
||
msgstr "A file exists with the same name: %s; do you want to replace it?"
|
||
|
||
#, c-format, boost-format
|
||
msgid "A config exists with the same name: %s, do you want to override it."
|
||
msgstr "A config exists with the same name: %s; do you want to replace it?"
|
||
|
||
msgid "Overwrite file"
|
||
msgstr "Overwrite file"
|
||
|
||
msgid "Yes to All"
|
||
msgstr "Yes to All"
|
||
|
||
msgid "No to All"
|
||
msgstr "No to All"
|
||
|
||
msgid "Choose a directory"
|
||
msgstr "Choose a directory"
|
||
|
||
#, c-format, boost-format
|
||
msgid "There is %d config exported. (Only non-system configs)"
|
||
msgid_plural "There are %d configs exported. (Only non-system configs)"
|
||
msgstr[0] ""
|
||
msgstr[1] ""
|
||
|
||
msgid "Export result"
|
||
msgstr "Export result"
|
||
|
||
msgid "Select profile to load:"
|
||
msgstr "Select profile to load:"
|
||
|
||
#, c-format, boost-format
|
||
msgid "There is %d config imported. (Only non-system and compatible configs)"
|
||
msgid_plural ""
|
||
"There are %d configs imported. (Only non-system and compatible configs)"
|
||
msgstr[0] ""
|
||
msgstr[1] ""
|
||
|
||
msgid "Import result"
|
||
msgstr "Import result"
|
||
|
||
msgid "File is missing"
|
||
msgstr "File is missing"
|
||
|
||
msgid "The project is no longer available."
|
||
msgstr "The project is no longer available."
|
||
|
||
msgid "Filament Settings"
|
||
msgstr "Filament Settings"
|
||
|
||
msgid ""
|
||
"Do you want to synchronize your personal data from QIDI Cloud? \n"
|
||
"It contains the following information:\n"
|
||
"1. The Process presets\n"
|
||
"2. The Filament presets\n"
|
||
"3. The Printer presets"
|
||
msgstr ""
|
||
"Do you want to synchronize your personal data from QIDI Cloud? \n"
|
||
"It contains the following information:\n"
|
||
"1. The Process presets\n"
|
||
"2. The Filament presets\n"
|
||
"3. The Printer presets"
|
||
|
||
msgid "Synchronization"
|
||
msgstr "Synchronization"
|
||
|
||
msgid "The device cannot handle more conversations. Please retry later."
|
||
msgstr "The device cannot handle more conversations. Please retry later."
|
||
|
||
msgid "Player is malfunctioning. Please reinstall the system player."
|
||
msgstr "Player is malfunctioning. Please reinstall the system player."
|
||
|
||
msgid "The player is not loaded, please click \"play\" button to retry."
|
||
msgstr "The player is not loaded; please click the \"play\" button to retry."
|
||
|
||
msgid "Temporarily closed because there is no operating for a long time."
|
||
msgstr ""
|
||
|
||
msgid "Please confirm if the printer is connected."
|
||
msgstr "Please confirm if the printer is connected."
|
||
|
||
msgid ""
|
||
"The printer is currently busy downloading. Please try again after it "
|
||
"finishes."
|
||
msgstr ""
|
||
"The printer is currently busy downloading. Please try again after it "
|
||
"finishes."
|
||
|
||
msgid "Printer camera is malfunctioning."
|
||
msgstr "Printer camera is malfunctioning."
|
||
|
||
msgid "Problem occured. Please update the printer firmware and try again."
|
||
msgstr "A problem occurred. Please update the printer firmware and try again."
|
||
|
||
msgid ""
|
||
"LAN Only Liveview is off. Please turn on the liveview on printer screen."
|
||
msgstr ""
|
||
"LAN Only Liveview is off. Please turn on the liveview on printer screen."
|
||
|
||
msgid "Please enter the IP of printer to connect."
|
||
msgstr "Please enter the IP of the printer to connect."
|
||
|
||
msgid "Initializing..."
|
||
msgstr "Initializing..."
|
||
|
||
msgid "Connection Failed. Please check the network and try again"
|
||
msgstr "Connection Failed. Please check the network and try again"
|
||
|
||
msgid ""
|
||
"Please check the network and try again, You can restart or update the "
|
||
"printer if the issue persists."
|
||
msgstr ""
|
||
"Please check the network and try again. You can restart or update the "
|
||
"printer if the issue persists."
|
||
|
||
msgid "The printer has been logged out and cannot connect."
|
||
msgstr "The printer has been logged out and cannot connect."
|
||
|
||
msgid "Stopped."
|
||
msgstr "Stopped."
|
||
|
||
msgid "LAN Connection Failed (Failed to start liveview)"
|
||
msgstr "LAN Connection Failed (Failed to start liveview)"
|
||
|
||
msgid ""
|
||
"Virtual Camera Tools is required for this task!\n"
|
||
"Do you want to install them?"
|
||
msgstr ""
|
||
"Virtual Camera Tools is required for this task!\n"
|
||
"Do you want to install them?"
|
||
|
||
msgid "Downloading Virtual Camera Tools"
|
||
msgstr "Downloading Virtual Camera Tools"
|
||
|
||
msgid ""
|
||
"Another virtual camera is running.\n"
|
||
"QIDI Studio supports only a single virtual camera.\n"
|
||
"Do you want to stop this virtual camera?"
|
||
msgstr ""
|
||
"Another virtual camera is running.\n"
|
||
"QIDI Studio supports only a single virtual camera.\n"
|
||
"Do you want to stop this virtual camera?"
|
||
|
||
#, c-format, boost-format
|
||
msgid "Virtual camera initialize failed (%s)!"
|
||
msgstr "Virtual camera initialize failed (%s)!"
|
||
|
||
msgid "Network unreachable"
|
||
msgstr "Network unreachable"
|
||
|
||
msgid "Information"
|
||
msgstr "Information"
|
||
|
||
msgid "Playing..."
|
||
msgstr "Playing..."
|
||
|
||
msgid "Loading..."
|
||
msgstr "Loading..."
|
||
|
||
msgid "Year"
|
||
msgstr "Year"
|
||
|
||
msgid "Month"
|
||
msgstr "Month"
|
||
|
||
msgid "All Files"
|
||
msgstr "All Files"
|
||
|
||
msgid "Group files by year, recent first."
|
||
msgstr "Group files by year, recent first."
|
||
|
||
msgid "Group files by month, recent first."
|
||
msgstr "Group files by month, recent first."
|
||
|
||
msgid "Show all files, recent first."
|
||
msgstr "Show all files, recent first."
|
||
|
||
msgid "Timelapse"
|
||
msgstr "Timelapse"
|
||
|
||
msgid "Switch to timelapse files."
|
||
msgstr "Switch to timelapse files."
|
||
|
||
msgid "Video"
|
||
msgstr "Video"
|
||
|
||
msgid "Switch to video files."
|
||
msgstr "Switch to video files."
|
||
|
||
msgid "Switch to 3mf model files."
|
||
msgstr "Switch to 3mf model files."
|
||
|
||
msgid "Delete selected files from printer."
|
||
msgstr "Delete selected files from printer."
|
||
|
||
msgid "Download"
|
||
msgstr "Download"
|
||
|
||
msgid "Download selected files from printer."
|
||
msgstr "Download selected files from printer."
|
||
|
||
msgid "Select"
|
||
msgstr "Select"
|
||
|
||
msgid "Batch manage files."
|
||
msgstr "Batch manage files."
|
||
|
||
msgid "Refresh"
|
||
msgstr "Refresh"
|
||
|
||
msgid "Reload file list from printer."
|
||
msgstr "Reload file list from printer."
|
||
|
||
msgid "No printers."
|
||
msgstr "No printers."
|
||
|
||
msgid "Loading file list..."
|
||
msgstr "Loading file list..."
|
||
|
||
msgid "No files"
|
||
msgstr "No files"
|
||
|
||
msgid "Load failed"
|
||
msgstr "Load failed"
|
||
|
||
msgid ""
|
||
"Browsing file in SD card is not supported in current firmware. Please update "
|
||
"the printer firmware."
|
||
msgstr ""
|
||
"Browsing file in SD card is not supported in current firmware. Please update "
|
||
"the printer firmware."
|
||
|
||
msgid ""
|
||
"Please check if the SD card is inserted into the printer.\n"
|
||
"If it still cannot be read, you can try formatting the SD card."
|
||
msgstr ""
|
||
"Please check if the Micro SD card is inserted into the printer.\n"
|
||
"If it still cannot be read, you can try formatting the card."
|
||
|
||
msgid "LAN Connection Failed (Failed to view sdcard)"
|
||
msgstr "LAN Connection Failed (Failed to view sdcard)"
|
||
|
||
msgid "Browsing file in SD card is not supported in LAN Only Mode."
|
||
msgstr "Browsing file in SD card is not supported in LAN Only Mode."
|
||
|
||
#, c-format, boost-format
|
||
msgid "You are going to delete %u file from printer. Are you sure to continue?"
|
||
msgid_plural ""
|
||
"You are going to delete %u files from printer. Are you sure to continue?"
|
||
msgstr[0] ""
|
||
msgstr[1] ""
|
||
|
||
msgid "Delete files"
|
||
msgstr "Delete files"
|
||
|
||
#, c-format, boost-format
|
||
msgid "Do you want to delete the file '%s' from printer?"
|
||
msgstr "Do you want to delete the file '%s' from printer?"
|
||
|
||
msgid "Delete file"
|
||
msgstr "Delete file"
|
||
|
||
msgid "Fetching model infomations ..."
|
||
msgstr "Fetching model information ..."
|
||
|
||
msgid "Failed to fetch model information from printer."
|
||
msgstr "Failed to fetch model information from printer."
|
||
|
||
msgid "Failed to parse model information."
|
||
msgstr "Failed to parse model information."
|
||
|
||
msgid ""
|
||
"The .gcode.3mf file contains no G-code data.Please slice it whth QIDI Studio "
|
||
"and export a new .gcode.3mf file."
|
||
msgstr ""
|
||
"The .gcode.3mf file contains no G-code data.Please slice it with QIDIStudio "
|
||
"and export a new .gcode.3mf file."
|
||
|
||
#, c-format, boost-format
|
||
msgid "File '%s' was lost! Please download it again."
|
||
msgstr "File '%s' was lost! Please download it again."
|
||
|
||
#, c-format, boost-format
|
||
msgid ""
|
||
"File: %s\n"
|
||
"Title: %s\n"
|
||
msgstr ""
|
||
"File: %s\n"
|
||
"Title: %s\n"
|
||
|
||
msgid "Download waiting..."
|
||
msgstr "Download waiting..."
|
||
|
||
msgid "Play"
|
||
msgstr "Play"
|
||
|
||
msgid "Open Folder"
|
||
msgstr "Open Folder"
|
||
|
||
msgid "Download finished"
|
||
msgstr "Download finished"
|
||
|
||
#, c-format, boost-format
|
||
msgid "Downloading %d%%..."
|
||
msgstr "Downloading %d%%..."
|
||
|
||
msgid ""
|
||
"Reconnecting the printer, the operation cannot be completed immediately, "
|
||
"please try again later."
|
||
msgstr ""
|
||
"Reconnecting the printer, the operation cannot be completed immediately, "
|
||
"please try again later."
|
||
|
||
msgid "File does not exist."
|
||
msgstr "File does not exist."
|
||
|
||
msgid "File checksum error. Please retry."
|
||
msgstr "File checksum error. Please retry."
|
||
|
||
msgid "Not supported on the current printer version."
|
||
msgstr "Not supported on the current printer version."
|
||
|
||
#, c-format, boost-format
|
||
msgid "Error code: %d"
|
||
msgstr "Error code: %d"
|
||
|
||
msgid "Speed:"
|
||
msgstr "Speed:"
|
||
|
||
msgid "Deadzone:"
|
||
msgstr "Deadzone:"
|
||
|
||
msgid "Options:"
|
||
msgstr "Options:"
|
||
|
||
msgid "Translation/Zoom"
|
||
msgstr "Translation/Zoom"
|
||
|
||
msgid "3Dconnexion settings"
|
||
msgstr "3Dconnexion settings"
|
||
|
||
msgid "Swap Y/Z axes"
|
||
msgstr "Swap Y/Z axes"
|
||
|
||
msgid "Printing Progress"
|
||
msgstr "Printing Progress"
|
||
|
||
msgid "Resume"
|
||
msgstr "Resume"
|
||
|
||
msgid "Stop"
|
||
msgstr "Stop"
|
||
|
||
msgid "Layer: N/A"
|
||
msgstr "Layer: N/A"
|
||
|
||
msgid "Clear"
|
||
msgstr "Clear"
|
||
|
||
msgid ""
|
||
"You have completed printing the mall model, \n"
|
||
"but the synchronization of rating information has failed."
|
||
msgstr ""
|
||
"You have completed printing the mall model, \n"
|
||
"but synchronizing rating information has failed."
|
||
|
||
msgid "How do you like this printing file?"
|
||
msgstr "How do you like this printing file?"
|
||
|
||
msgid ""
|
||
"(The model has already been rated. Your rating will overwrite the previous "
|
||
"rating.)"
|
||
msgstr ""
|
||
"(The model has already been rated. Your rating will overwrite the previous "
|
||
"rating.)"
|
||
|
||
msgid "Rate"
|
||
msgstr "Rate"
|
||
|
||
msgid "Camera"
|
||
msgstr "Camera"
|
||
|
||
msgid "SD Card"
|
||
msgstr "MicroSD Card"
|
||
|
||
msgid "Camera Setting"
|
||
msgstr "Camera Setting"
|
||
|
||
msgid "Control"
|
||
msgstr "Control"
|
||
|
||
msgid "Printer Parts"
|
||
msgstr "Printer Parts"
|
||
|
||
msgid "Print Options"
|
||
msgstr "Print Options"
|
||
|
||
msgid "100%"
|
||
msgstr "100%"
|
||
|
||
msgid "Lamp"
|
||
msgstr "Lamp"
|
||
|
||
msgid "Aux"
|
||
msgstr "Aux"
|
||
|
||
msgid "Cham"
|
||
msgstr "Cham"
|
||
|
||
msgid "Bed"
|
||
msgstr "Bed"
|
||
|
||
msgid "Debug Info"
|
||
msgstr "Debug Info"
|
||
|
||
msgid "No SD Card"
|
||
msgstr "No MicroSD Card"
|
||
|
||
msgid "SD Card Abnormal"
|
||
msgstr "MicroSD Card Abnormal"
|
||
|
||
msgid "Cancel print"
|
||
msgstr "Cancel print"
|
||
|
||
msgid "Are you sure you want to cancel this print?"
|
||
msgstr "Are you sure you want to cancel this print?"
|
||
|
||
msgid "Downloading..."
|
||
msgstr "Downloading..."
|
||
|
||
msgid "Cloud Slicing..."
|
||
msgstr "Cloud Slicing..."
|
||
|
||
#, c-format, boost-format
|
||
msgid "In Cloud Slicing Queue, there are %s tasks ahead."
|
||
msgstr "In Cloud Slicing Queue, there are %s tasks ahead."
|
||
|
||
#, c-format, boost-format
|
||
msgid "Layer: %s"
|
||
msgstr "Layer: %s"
|
||
|
||
#, c-format, boost-format
|
||
msgid "Layer: %d/%d"
|
||
msgstr "Layer: %d/%d"
|
||
|
||
msgid ""
|
||
"Please heat the nozzle to above 170 degree before loading or unloading "
|
||
"filament."
|
||
msgstr ""
|
||
"Please heat the nozzle to above 170 degree before loading or unloading "
|
||
"filament."
|
||
|
||
msgid "Still unload"
|
||
msgstr "Still unload"
|
||
|
||
msgid "Still load"
|
||
msgstr "Still load"
|
||
|
||
msgid "Please select an AMS slot before calibration"
|
||
msgstr "Please select an AMS slot before calibration"
|
||
|
||
msgid ""
|
||
"Cannot read filament info: the filament is loaded to the tool head,please "
|
||
"unload the filament and try again."
|
||
msgstr ""
|
||
"Cannot read filament info: the filament is loaded to the tool head,please "
|
||
"unload the filament and try again."
|
||
|
||
msgid "This only takes effect during printing"
|
||
msgstr "This only takes effect during printing"
|
||
|
||
msgid "Silent"
|
||
msgstr "Silent"
|
||
|
||
msgid "Standard"
|
||
msgstr "Standard"
|
||
|
||
msgid "Sport"
|
||
msgstr "Sport"
|
||
|
||
msgid "Ludicrous"
|
||
msgstr "Ludicrous"
|
||
|
||
msgid "Can't start this without SD card."
|
||
msgstr "Can't start this without a Micro SD card."
|
||
|
||
msgid "Rate the Print Profile"
|
||
msgstr "Rate the Print Profile"
|
||
|
||
msgid "Comment"
|
||
msgstr "Comment"
|
||
|
||
msgid "Rate this print"
|
||
msgstr "Rate this print"
|
||
|
||
msgid "Add Photo"
|
||
msgstr "Add Photo"
|
||
|
||
msgid "Delete Photo"
|
||
msgstr "Delete Photo"
|
||
|
||
msgid "Submit"
|
||
msgstr "Submit"
|
||
|
||
msgid "Please click on the star first."
|
||
msgstr "Please click on the star first."
|
||
|
||
msgid "InFo"
|
||
msgstr "Info"
|
||
|
||
msgid "Get oss config failed."
|
||
msgstr "Get oss config failed."
|
||
|
||
msgid "Upload Pictures"
|
||
msgstr "Upload Pictures"
|
||
|
||
msgid "Number of images successfully uploaded"
|
||
msgstr "Number of images successfully uploaded"
|
||
|
||
msgid " upload failed"
|
||
msgstr " upload failed"
|
||
|
||
msgid " upload config parse failed\n"
|
||
msgstr " upload config parse failed\n"
|
||
|
||
msgid " No corresponding storage bucket\n"
|
||
msgstr " No corresponding storage bucket\n"
|
||
|
||
msgid " can not be opened\n"
|
||
msgstr " cannot be opened\n"
|
||
|
||
msgid ""
|
||
"The following issues occurred during the process of uploading images. Do you "
|
||
"want to ignore them?\n"
|
||
"\n"
|
||
msgstr ""
|
||
"The following issues occurred during the process of uploading images. Do you "
|
||
"want to ignore them?\n"
|
||
"\n"
|
||
|
||
msgid "info"
|
||
msgstr "info"
|
||
|
||
msgid "Synchronizing the printing results. Please retry a few seconds later."
|
||
msgstr "Synchronizing the printing results. Please retry a few seconds later."
|
||
|
||
msgid "Upload failed\n"
|
||
msgstr "Upload failed\n"
|
||
|
||
msgid "obtaining instance_id failed\n"
|
||
msgstr "obtaining instance_id failed\n"
|
||
|
||
msgid ""
|
||
"Your comment result cannot be uploaded due to some reasons. As follows:\n"
|
||
"\n"
|
||
" error code: "
|
||
msgstr ""
|
||
"Your comment result cannot be uploaded due to the following reasons:\n"
|
||
"\n"
|
||
" error code: "
|
||
|
||
msgid "error message: "
|
||
msgstr "error message: "
|
||
|
||
msgid ""
|
||
"\n"
|
||
"\n"
|
||
"Would you like to redirect to the webpage for rating?"
|
||
msgstr ""
|
||
"\n"
|
||
"\n"
|
||
"Would you like to redirect to the webpage to give a rating?"
|
||
|
||
msgid ""
|
||
"Some of your images failed to upload. Would you like to redirect to the "
|
||
"webpage for rating?"
|
||
msgstr ""
|
||
"Some of your images failed to upload. Would you like to redirect to the "
|
||
"webpage for rating?"
|
||
|
||
msgid "You can select up to 16 images."
|
||
msgstr "You can select up to 16 images."
|
||
|
||
msgid ""
|
||
"At least one successful print record of this print profile is required \n"
|
||
"to give a positive rating(4 or 5stars)."
|
||
msgstr ""
|
||
"At least one successful print record of this print profile is required \n"
|
||
"to give a positive rating (4 or 5 stars)."
|
||
|
||
msgid "Status"
|
||
msgstr "Status"
|
||
|
||
msgid "Update"
|
||
msgstr "Update"
|
||
|
||
msgid "Don't show again"
|
||
msgstr "Don't show again"
|
||
|
||
#, c-format, boost-format
|
||
msgid "%s error"
|
||
msgstr "%s error"
|
||
|
||
#, c-format, boost-format
|
||
msgid "%s has encountered an error"
|
||
msgstr "%s has encountered an error"
|
||
|
||
#, c-format, boost-format
|
||
msgid "%s warning"
|
||
msgstr "%s warning"
|
||
|
||
#, c-format, boost-format
|
||
msgid "%s has a warning"
|
||
msgstr "%s has a warning"
|
||
|
||
#, c-format, boost-format
|
||
msgid "%s info"
|
||
msgstr "%s info"
|
||
|
||
#, c-format, boost-format
|
||
msgid "%s information"
|
||
msgstr "%s information"
|
||
|
||
msgid "Skip"
|
||
msgstr "Skip"
|
||
|
||
msgid "Newer 3mf version"
|
||
msgstr "Newer 3mf version"
|
||
|
||
msgid ""
|
||
"The 3mf file version is in Beta and it is newer than the current QIDI Studio "
|
||
"version."
|
||
msgstr ""
|
||
"The 3mf file version is in Beta and it is newer than the current QIDI Studio "
|
||
"version."
|
||
|
||
msgid "If you would like to try QIDI Studio Beta, you may click to"
|
||
msgstr "If you would like to try QIDI Studio Beta, you may click to"
|
||
|
||
msgid "Download Beta Version"
|
||
msgstr "Download Beta Version"
|
||
|
||
msgid "The 3mf file version is newer than the current QIDI Studio version."
|
||
msgstr "The 3mf file version is newer than the current QIDI Studio version."
|
||
|
||
msgid "Update your QIDI Studio could enable all functionality in the 3mf file."
|
||
msgstr ""
|
||
"Update your QIDI Studio could enable all functionality in the 3mf file."
|
||
|
||
msgid "Current Version: "
|
||
msgstr "Current Version: "
|
||
|
||
msgid "Latest Version: "
|
||
msgstr "Latest Version: "
|
||
|
||
msgid "Not for now"
|
||
msgstr "Not for now"
|
||
|
||
msgid "3D Mouse disconnected."
|
||
msgstr "3D Mouse disconnected."
|
||
|
||
msgid "Configuration can update now."
|
||
msgstr "Configuration can update now."
|
||
|
||
msgid "Detail."
|
||
msgstr "Detail."
|
||
|
||
msgid "Integration was successful."
|
||
msgstr "Integration was successful."
|
||
|
||
msgid "Integration failed."
|
||
msgstr "Integration failed."
|
||
|
||
msgid "Undo integration was successful."
|
||
msgstr "Undo integration was successful."
|
||
|
||
msgid "New network plug-in available."
|
||
msgstr "New network plug-in available."
|
||
|
||
msgid "Details"
|
||
msgstr "Details"
|
||
|
||
msgid "New printer config available."
|
||
msgstr "New printer config available."
|
||
|
||
msgid "Wiki"
|
||
msgstr "Wiki"
|
||
|
||
msgid "Undo integration failed."
|
||
msgstr "Undo integration failed."
|
||
|
||
msgid "Exporting."
|
||
msgstr "Exporting."
|
||
|
||
msgid "Software has New version."
|
||
msgstr "Software has New version."
|
||
|
||
msgid "Goto download page."
|
||
msgstr "Goto download page."
|
||
|
||
msgid "Open Folder."
|
||
msgstr "Open Folder."
|
||
|
||
msgid "Safely remove hardware."
|
||
msgstr "Safely remove hardware."
|
||
|
||
#, c-format, boost-format
|
||
msgid "%1$d Object has custom support."
|
||
msgid_plural "%1$d Objects have custom support."
|
||
msgstr[0] ""
|
||
msgstr[1] ""
|
||
|
||
#, c-format, boost-format
|
||
msgid "%1$d Object has color painting."
|
||
msgid_plural "%1$d Objects have color painting."
|
||
msgstr[0] "%1$d Object has color painting."
|
||
msgstr[1] "%1$d Objects have color painting."
|
||
|
||
#, c-format, boost-format
|
||
msgid "%1$d object was loaded as a part of cut object."
|
||
msgid_plural "%1$d objects were loaded as parts of cut object"
|
||
msgstr[0] ""
|
||
msgstr[1] ""
|
||
|
||
msgid "ERROR"
|
||
msgstr "ERROR"
|
||
|
||
msgid "CANCELED"
|
||
msgstr "CANCELED"
|
||
|
||
msgid "COMPLETED"
|
||
msgstr "COMPLETED"
|
||
|
||
msgid "Cancel upload"
|
||
msgstr "Cancel upload"
|
||
|
||
msgid "Jump to"
|
||
msgstr "Jump to"
|
||
|
||
msgid "Error:"
|
||
msgstr "Error:"
|
||
|
||
msgid "Warning:"
|
||
msgstr "Warning:"
|
||
|
||
msgid "Export successfully."
|
||
msgstr "Export successfully."
|
||
|
||
msgid "Model file downloaded."
|
||
msgstr "Model file downloaded."
|
||
|
||
msgid "Serious warning:"
|
||
msgstr "Serious warning:"
|
||
|
||
msgid " (Repair)"
|
||
msgstr " (Repair)"
|
||
|
||
msgid " Click here to install it."
|
||
msgstr " Click here to install it."
|
||
|
||
msgid "WARNING:"
|
||
msgstr "WARNING:"
|
||
|
||
msgid "Your model needs support ! Please make support material enable."
|
||
msgstr "Your model needs support! Please enable support material."
|
||
|
||
msgid "Gcode path overlap"
|
||
msgstr "Gcode path overlap"
|
||
|
||
msgid "Support painting"
|
||
msgstr "Support Painting"
|
||
|
||
msgid "Color painting"
|
||
msgstr "Color Painting"
|
||
|
||
msgid "Cut connectors"
|
||
msgstr "Cut connectors"
|
||
|
||
msgid "Layers"
|
||
msgstr "Layers"
|
||
|
||
msgid "Range"
|
||
msgstr "Range"
|
||
|
||
msgid ""
|
||
"The application cannot run normally because OpenGL version is lower than "
|
||
"2.0.\n"
|
||
msgstr ""
|
||
"The application cannot run normally because OpenGL version is lower than "
|
||
"2.0.\n"
|
||
|
||
msgid "Please upgrade your graphics card driver."
|
||
msgstr "Please upgrade your graphics card driver."
|
||
|
||
msgid "Unsupported OpenGL version"
|
||
msgstr "Unsupported OpenGL version"
|
||
|
||
#, c-format, boost-format
|
||
msgid ""
|
||
"Unable to load shaders:\n"
|
||
"%s"
|
||
msgstr ""
|
||
"Unable to load shaders:\n"
|
||
"%s"
|
||
|
||
msgid "Error loading shaders"
|
||
msgstr "Error loading shaders"
|
||
|
||
msgctxt "Layers"
|
||
msgid "Top"
|
||
msgstr "Top"
|
||
|
||
msgctxt "Layers"
|
||
msgid "Bottom"
|
||
msgstr "Bottom"
|
||
|
||
msgid "Enable AI monitoring of printing"
|
||
msgstr "Enable AI monitoring of printing"
|
||
|
||
msgid "Sensitivity of pausing is"
|
||
msgstr "Sensitivity of pausing is"
|
||
|
||
msgid "Enable detection of build plate position"
|
||
msgstr "Enable detection of build plate position"
|
||
|
||
msgid ""
|
||
"The localization tag of build plate is detected, and printing is paused if "
|
||
"the tag is not in predefined range."
|
||
msgstr ""
|
||
"The localization tag of build plate is detected, and printing is paused if "
|
||
"the tag is not in predefined range."
|
||
|
||
msgid "First Layer Inspection"
|
||
msgstr "First Layer Inspection"
|
||
|
||
msgid "Auto-recovery from step loss"
|
||
msgstr "Auto-recover from step loss"
|
||
|
||
msgid "Allow Prompt Sound"
|
||
msgstr "Allow Prompt Sound"
|
||
|
||
msgid "Filament Tangle Detect"
|
||
msgstr "Filament Tangle Detection"
|
||
|
||
msgid "Nozzle Clumping Detection"
|
||
msgstr "Nozzle Clumping Detection"
|
||
|
||
msgid "Check if the nozzle is clumping by filament or other foreign objects."
|
||
msgstr "Check if the nozzle is clumping by filament or other foreign objects."
|
||
|
||
msgid "Nozzle Type"
|
||
msgstr "Nozzle Type"
|
||
|
||
msgid "Stainless Steel"
|
||
msgstr "Stainless Steel"
|
||
|
||
msgid "Hardened Steel"
|
||
msgstr "Hardened Steel"
|
||
|
||
#, c-format, boost-format
|
||
msgid "%.1f"
|
||
msgstr "%.1f"
|
||
|
||
msgid "Global"
|
||
msgstr "Global"
|
||
|
||
msgid "Objects"
|
||
msgstr "Objects"
|
||
|
||
msgid "Advance"
|
||
msgstr "Advanced"
|
||
|
||
msgid "Compare presets"
|
||
msgstr "Compare presets"
|
||
|
||
msgid "View all object's settings"
|
||
msgstr "View all object's settings"
|
||
|
||
msgid "Filament settings"
|
||
msgstr "Filament settings"
|
||
|
||
msgid "Printer settings"
|
||
msgstr "Printer settings"
|
||
|
||
#, boost-format
|
||
msgid " plate %1%: "
|
||
msgstr " plate %1%: "
|
||
|
||
msgid "Invalid name, the following characters are not allowed:"
|
||
msgstr "Invalid name, the following characters are not allowed:"
|
||
|
||
msgid "Sliced Info"
|
||
msgstr "Sliced Info"
|
||
|
||
msgid "Used Filament (m)"
|
||
msgstr "Used Filament (m)"
|
||
|
||
msgid "Used Filament (mm³)"
|
||
msgstr "Used Filament (mm³)"
|
||
|
||
msgid "Used Filament (g)"
|
||
msgstr "Used Filament (g)"
|
||
|
||
msgid "Used Materials"
|
||
msgstr "Used Materials"
|
||
|
||
msgid "Estimated time"
|
||
msgstr "Estimated time"
|
||
|
||
msgid "Filament changes"
|
||
msgstr "Filament changes"
|
||
|
||
msgid "Click to edit preset"
|
||
msgstr "Click to edit preset"
|
||
|
||
msgid "Connection"
|
||
msgstr "Connection"
|
||
|
||
msgid "Bed type"
|
||
msgstr "Plate type"
|
||
|
||
msgid "Flushing volumes"
|
||
msgstr "Flushing volumes"
|
||
|
||
msgid "Add one filament"
|
||
msgstr "Add one filament"
|
||
|
||
msgid "Remove last filament"
|
||
msgstr "Remove last filament"
|
||
|
||
msgid "Synchronize filament list from AMS"
|
||
msgstr "Synchronize filament list from AMS"
|
||
|
||
msgid "Set filaments to use"
|
||
msgstr "Set filaments to use"
|
||
|
||
msgid "Search plate, object and part."
|
||
msgstr "Search plate, object and part."
|
||
|
||
msgid ""
|
||
"No AMS filaments. Please select a printer in 'Device' page to load AMS info."
|
||
msgstr ""
|
||
"No AMS filaments. Please select a printer in 'Device' page to load AMS info."
|
||
|
||
msgid "Sync filaments with AMS"
|
||
msgstr "Sync filaments with AMS"
|
||
|
||
msgid ""
|
||
"Sync filaments with AMS will drop all current selected filament presets and "
|
||
"colors. Do you want to continue?"
|
||
msgstr ""
|
||
"Sync filaments with AMS will drop all current selected filament presets and "
|
||
"colors. Do you want to continue?"
|
||
|
||
msgid ""
|
||
"Already did a synchronization, do you want to sync only changes or resync "
|
||
"all?"
|
||
msgstr ""
|
||
"Already did a synchronization, do you want to sync only changes or resync "
|
||
"all?"
|
||
|
||
msgid "Sync"
|
||
msgstr "Sync"
|
||
|
||
msgid "Resync"
|
||
msgstr "Resync"
|
||
|
||
msgid "There are no compatible filaments, and sync is not performed."
|
||
msgstr "There are no compatible filaments, and sync is not performed."
|
||
|
||
msgid ""
|
||
"There are some unknown or uncompatible filaments mapped to generic preset. "
|
||
"Please update QIDI Studio or restart QIDI Studio to check if there is an "
|
||
"update to system presets."
|
||
msgstr ""
|
||
"There are some unknown or uncompatible filaments mapped to generic preset. "
|
||
"Please update QIDI Studio or restart QIDI Studio to check if there is an "
|
||
"update to system presets."
|
||
|
||
#, boost-format
|
||
msgid "Do you want to save changes to \"%1%\"?"
|
||
msgstr "Do you want to save changes to \"%1%\"?"
|
||
|
||
#, c-format, boost-format
|
||
msgid ""
|
||
"Successfully unmounted. The device %s(%s) can now be safely removed from the "
|
||
"computer."
|
||
msgstr ""
|
||
"Successfully unmounted. The device %s(%s) can now be safely removed from the "
|
||
"computer."
|
||
|
||
#, c-format, boost-format
|
||
msgid "Ejecting of device %s(%s) has failed."
|
||
msgstr "Ejecting of device %s(%s) has failed."
|
||
|
||
msgid "Previous unsaved project detected, do you want to restore it?"
|
||
msgstr "Previous unsaved project detected, do you want to restore it?"
|
||
|
||
msgid "Restore"
|
||
msgstr "Restore"
|
||
|
||
msgid ""
|
||
"The current hot bed temperature is relatively high. The nozzle may be "
|
||
"clogged when printing this filament in a closed enclosure. Please open the "
|
||
"front door and/or remove the upper glass."
|
||
msgstr ""
|
||
"The current heatbed temperature is relatively high. The nozzle may clog when "
|
||
"printing this filament in a closed environment. Please open the front door "
|
||
"and/or remove the upper glass."
|
||
|
||
msgid ""
|
||
"The nozzle hardness required by the filament is higher than the default "
|
||
"nozzle hardness of the printer. Please replace the hardened nozzle or "
|
||
"filament, otherwise, the nozzle will be attrited or damaged."
|
||
msgstr ""
|
||
"The nozzle hardness required by the filament is higher than the default "
|
||
"nozzle hardness of the printer. Please replace the hardened nozzle or "
|
||
"filament, otherwise, the nozzle will be attrited or damaged."
|
||
|
||
msgid ""
|
||
"Enabling traditional timelapse photography may cause surface imperfections. "
|
||
"It is recommended to change to smooth mode."
|
||
msgstr ""
|
||
"Enabling traditional timelapse photography may cause surface imperfections. "
|
||
"It is recommended to change to smooth mode."
|
||
|
||
#, c-format, boost-format
|
||
msgid "Loading file: %s"
|
||
msgstr "Loading file: %s"
|
||
|
||
msgid "The 3mf is not from QIDI Lab, load geometry data only."
|
||
msgstr "The 3mf is not from QIDI Lab, load geometry data only."
|
||
|
||
msgid "Load 3mf"
|
||
msgstr "Load 3mf"
|
||
|
||
msgid "The Config can not be loaded."
|
||
msgstr "The Config can not be loaded."
|
||
|
||
msgid ""
|
||
"Due to the lower version of QIDI Studio, this 3mf file cannot be fully "
|
||
"loaded. Please update QIDI Studio to the latest version"
|
||
msgstr ""
|
||
|
||
msgid "Found following keys unrecognized:\n"
|
||
msgstr "The following unrecognized keys have been found:\n"
|
||
|
||
msgid "Invalid values found in the 3mf:"
|
||
msgstr "Invalid values found in the 3mf:"
|
||
|
||
msgid "Please correct them in the param tabs"
|
||
msgstr "Please correct them in the Param tabs"
|
||
|
||
msgid "The 3mf has following modified G-codes in filament or printer presets:"
|
||
msgstr "The 3mf has following modified G-code in filament or printer presets:"
|
||
|
||
msgid ""
|
||
"Please confirm that these modified G-codes are safe to prevent any damage to "
|
||
"the machine!"
|
||
msgstr ""
|
||
"Please confirm that these modified G-codes are safe to prevent any damage to "
|
||
"the machine!"
|
||
|
||
msgid "Modified G-codes"
|
||
msgstr "Modified G-code"
|
||
|
||
msgid "The 3mf has following customized filament or printer presets:"
|
||
msgstr "The 3mf has following customized filament or printer presets:"
|
||
|
||
msgid ""
|
||
"Please confirm that the G-codes within these presets are safe to prevent any "
|
||
"damage to the machine!"
|
||
msgstr ""
|
||
"Please confirm that the G-codes within these presets are safe to prevent any "
|
||
"damage to the machine!"
|
||
|
||
msgid "Customized Preset"
|
||
msgstr "Customized Preset"
|
||
|
||
msgid "Name of components inside step file is not UTF8 format!"
|
||
msgstr "Name of components inside step file is not UTF8 format!"
|
||
|
||
msgid "The name may show garbage characters!"
|
||
msgstr "The name may show garbage characters!"
|
||
|
||
#, boost-format
|
||
msgid "Failed loading file \"%1%\". An invalid configuration was found."
|
||
msgstr "Failed loading file \"%1%\". An invalid configuration was found."
|
||
|
||
msgid "Objects with zero volume removed"
|
||
msgstr "Objects with zero volume removed"
|
||
|
||
msgid "The volume of the object is zero"
|
||
msgstr "The volume of the object is zero"
|
||
|
||
#, c-format, boost-format
|
||
msgid ""
|
||
"The object from file %s is too small, and maybe in meters or inches.\n"
|
||
" Do you want to scale to millimeters?"
|
||
msgstr ""
|
||
"The object from file %s is too small, and may be in meters or inches.\n"
|
||
" Do you want to scale to millimeters?"
|
||
|
||
msgid "Object too small"
|
||
msgstr "Object too small"
|
||
|
||
msgid ""
|
||
"This file contains several objects positioned at multiple heights.\n"
|
||
"Instead of considering them as multiple objects, should \n"
|
||
"the file be loaded as a single object having multiple parts?"
|
||
msgstr ""
|
||
"This file contains several objects positioned at multiple heights.\n"
|
||
"Instead of considering them as multiple objects, should \n"
|
||
"the file be loaded as a single object having multiple parts?"
|
||
|
||
msgid "Multi-part object detected"
|
||
msgstr "Multi-part object detected"
|
||
|
||
msgid "Load these files as a single object with multiple parts?\n"
|
||
msgstr "Load these files as a single object with multiple parts?\n"
|
||
|
||
msgid "Object with multiple parts was detected"
|
||
msgstr "Object with multiple parts was detected"
|
||
|
||
msgid "The file does not contain any geometry data."
|
||
msgstr "The file does not contain any geometry data."
|
||
|
||
msgid ""
|
||
"Your object appears to be too large, Do you want to scale it down to fit the "
|
||
"heat bed automatically?"
|
||
msgstr ""
|
||
"Your object appears to be too large, Do you want to scale it down to fit the "
|
||
"heat bed automatically?"
|
||
|
||
msgid "Object too large"
|
||
msgstr "Object too large"
|
||
|
||
msgid "Export STL file:"
|
||
msgstr "Export STL file:"
|
||
|
||
msgid "Export AMF file:"
|
||
msgstr "Export AMF file:"
|
||
|
||
msgid "Save file as:"
|
||
msgstr "Save file as:"
|
||
|
||
msgid "Export OBJ file:"
|
||
msgstr "Export OBJ file:"
|
||
|
||
#, c-format, boost-format
|
||
msgid ""
|
||
"The file %s already exists\n"
|
||
"Do you want to replace it?"
|
||
msgstr ""
|
||
"The file %s already exists.\n"
|
||
"Do you want to replace it?"
|
||
|
||
msgid "Comfirm Save As"
|
||
msgstr "Confirm Save As"
|
||
|
||
msgid "Delete object which is a part of cut object"
|
||
msgstr "Delete object which is a part of cut object"
|
||
|
||
msgid ""
|
||
"You try to delete an object which is a part of a cut object.\n"
|
||
"This action will break a cut correspondence.\n"
|
||
"After that model consistency can't be guaranteed."
|
||
msgstr ""
|
||
"You try to delete an object which is a part of a cut object.\n"
|
||
"This action will break a cut correspondence.\n"
|
||
"After that model consistency can't be guaranteed."
|
||
|
||
msgid "The selected object couldn't be split."
|
||
msgstr "The selected object couldn't be split."
|
||
|
||
msgid "Another export job is running."
|
||
msgstr "Another export job is running."
|
||
|
||
msgid "Unable to replace with more than one volume"
|
||
msgstr "Unable to replace with more than one volume"
|
||
|
||
msgid "Error during replace"
|
||
msgstr "Error during replace"
|
||
|
||
msgid "Replace from:"
|
||
msgstr "Replace from:"
|
||
|
||
msgid "Select a new file"
|
||
msgstr "Select a new file"
|
||
|
||
msgid "File for the replace wasn't selected"
|
||
msgstr "File for the replace wasn't selected"
|
||
|
||
msgid "Please select a file"
|
||
msgstr "Please select a file"
|
||
|
||
msgid "Do you want to replace it"
|
||
msgstr "Do you want to replace it?"
|
||
|
||
msgid "Message"
|
||
msgstr "Message"
|
||
|
||
msgid "Reload from:"
|
||
msgstr "Reload from:"
|
||
|
||
msgid "Unable to reload:"
|
||
msgstr "Unable to reload:"
|
||
|
||
msgid "Error during reload"
|
||
msgstr "Error during reload"
|
||
|
||
msgid "Slicing"
|
||
msgstr "Slicing"
|
||
|
||
msgid "There are warnings after slicing models:"
|
||
msgstr "There are warnings after slicing models:"
|
||
|
||
msgid "warnings"
|
||
msgstr "warnings"
|
||
|
||
msgid "Invalid data"
|
||
msgstr "Invalid data"
|
||
|
||
msgid "Slicing Canceled"
|
||
msgstr "Slicing Canceled"
|
||
|
||
#, c-format, boost-format
|
||
msgid "Slicing Plate %d"
|
||
msgstr "Slicing Plate %d"
|
||
|
||
msgid "Please resolve the slicing errors and publish again."
|
||
msgstr "Please resolve the slicing errors and publish again."
|
||
|
||
msgid ""
|
||
"Network Plug-in is not detected. Network related features are unavailable."
|
||
msgstr ""
|
||
"Network Plug-in is not detected. Network related features are unavailable."
|
||
|
||
msgid ""
|
||
"Preview only mode:\n"
|
||
"The loaded file contains gcode only, Can not enter the Prepare page"
|
||
msgstr ""
|
||
"Preview only mode:\n"
|
||
"The loaded file contains gcode only, Can not enter the Prepare page"
|
||
|
||
msgid "You can keep the modified presets to the new project or discard them"
|
||
msgstr "You can keep the modified presets to the new project or discard them"
|
||
|
||
msgid "Creating a new project"
|
||
msgstr "Creating a new project"
|
||
|
||
msgid "Load project"
|
||
msgstr "Load project"
|
||
|
||
msgid ""
|
||
"Failed to save the project.\n"
|
||
"Please check whether the folder exists online or if other programs open the "
|
||
"project file or if there is enough disk space."
|
||
msgstr ""
|
||
|
||
msgid "Save project"
|
||
msgstr "Save project"
|
||
|
||
msgid "Importing Model"
|
||
msgstr "Importing Model"
|
||
|
||
msgid "prepare 3mf file..."
|
||
msgstr "prepare 3mf file..."
|
||
|
||
msgid "Download failed, unknown file format."
|
||
msgstr "Download failed; unknown file format."
|
||
|
||
msgid "downloading project ..."
|
||
msgstr "downloading project ..."
|
||
|
||
msgid "Download failed, File size exception."
|
||
msgstr "Download failed; File size exception."
|
||
|
||
#, c-format, boost-format
|
||
msgid "Project downloaded %d%%"
|
||
msgstr "Project downloaded %d%%"
|
||
|
||
msgid ""
|
||
"Importing to QIDI Studio failed. Please download the file and manually "
|
||
"import it."
|
||
msgstr ""
|
||
"Importing to QIDI Studio failed. Please download the file and manually "
|
||
"import it."
|
||
|
||
msgid "The selected file"
|
||
msgstr "The selected file"
|
||
|
||
msgid "does not contain valid gcode."
|
||
msgstr "does not contain valid gcode."
|
||
|
||
msgid "Error occurs while loading G-code file"
|
||
msgstr "Error occurs while loading G-code file"
|
||
|
||
msgid "Drop project file"
|
||
msgstr "Drop project file"
|
||
|
||
msgid "Please select an action"
|
||
msgstr "Please select an action"
|
||
|
||
msgid "Open as project"
|
||
msgstr "Open as project"
|
||
|
||
msgid "Import geometry only"
|
||
msgstr "Import geometry only"
|
||
|
||
msgid "Only one G-code file can be opened at the same time."
|
||
msgstr "Only one G-code file can be opened at the same time."
|
||
|
||
msgid "G-code loading"
|
||
msgstr "G-code loading"
|
||
|
||
msgid "G-code files can not be loaded with models together!"
|
||
msgstr "G-code files can not be loaded with models together!"
|
||
|
||
msgid "Can not add models when in preview mode!"
|
||
msgstr "Unable to add models in preview mode"
|
||
|
||
msgid "Add Models"
|
||
msgstr "Add Models"
|
||
|
||
msgid "All objects will be removed, continue?"
|
||
msgstr "All objects will be removed, continue?"
|
||
|
||
msgid "The current project has unsaved changes, save it before continue?"
|
||
msgstr ""
|
||
"The current project has unsaved changes; would you like to save before "
|
||
"continuing?"
|
||
|
||
msgid "Remember my choice."
|
||
msgstr "Remember my choice."
|
||
|
||
msgid "Number of copies:"
|
||
msgstr "Number of copies:"
|
||
|
||
msgid "Copies of the selected object"
|
||
msgstr "Copies of the selected object"
|
||
|
||
msgid "Save G-code file as:"
|
||
msgstr "Save G-code file as:"
|
||
|
||
msgid "Save SLA file as:"
|
||
msgstr "Save SLA file as:"
|
||
|
||
msgid "The provided file name is not valid."
|
||
msgstr "The provided file name is not valid."
|
||
|
||
msgid "The following characters are not allowed by a FAT file system:"
|
||
msgstr "The following characters are not allowed by a FAT file system:"
|
||
|
||
msgid "Save Sliced file as:"
|
||
msgstr "Save Sliced file as:"
|
||
|
||
#, c-format, boost-format
|
||
msgid ""
|
||
"The file %s has been sent to the printer's storage space and can be viewed "
|
||
"on the printer."
|
||
msgstr ""
|
||
"The file %s has been sent to the printer's storage space and can be viewed "
|
||
"on the printer."
|
||
|
||
msgid ""
|
||
"Unable to perform boolean operation on model meshes. Only positive parts "
|
||
"will be kept. You may fix the meshes and try agian."
|
||
msgstr ""
|
||
"Unable to perform boolean operation on model meshes. Only positive parts "
|
||
"will be kept. You may fix the meshes and try agian."
|
||
|
||
#, boost-format
|
||
msgid "Reason: part \"%1%\" is empty."
|
||
msgstr "Reason: part \"%1%\" is empty."
|
||
|
||
#, boost-format
|
||
msgid "Reason: part \"%1%\" does not bound a volume."
|
||
msgstr "Reason: part \"%1%\" does not bound a volume."
|
||
|
||
#, boost-format
|
||
msgid "Reason: part \"%1%\" has self intersection."
|
||
msgstr "Reason: part \"%1%\" has self intersection."
|
||
|
||
#, boost-format
|
||
msgid "Reason: \"%1%\" and another part have no intersection."
|
||
msgstr "Reason: \"%1%\" and another part have no intersection."
|
||
|
||
msgid ""
|
||
"Negative parts detected. Would you like to perform mesh boolean before "
|
||
"exporting?"
|
||
msgstr ""
|
||
"Negative parts detected. Would you like to perform mesh boolean before "
|
||
"exporting?"
|
||
|
||
msgid ""
|
||
"Print By Object: \n"
|
||
"Suggest to use auto-arrange to avoid collisions when printing."
|
||
msgstr ""
|
||
"Print By Object: \n"
|
||
"We suggest using auto-arrange to avoid collisions when printing."
|
||
|
||
msgid "Send G-code"
|
||
msgstr "Send G-code"
|
||
|
||
msgid "Send to printer"
|
||
msgstr "Send to printer"
|
||
|
||
msgid "Custom supports and color painting were removed before repairing."
|
||
msgstr "Custom supports and color painting were removed before repairing."
|
||
|
||
msgid "Invalid number"
|
||
msgstr "Invalid number"
|
||
|
||
msgid "Plate Settings"
|
||
msgstr "Plate Settings"
|
||
|
||
#, boost-format
|
||
msgid "Number of currently selected parts: %1%\n"
|
||
msgstr "Number of currently selected parts: %1%\n"
|
||
|
||
#, boost-format
|
||
msgid "Number of currently selected objects: %1%\n"
|
||
msgstr "Number of currently selected objects: %1%\n"
|
||
|
||
#, boost-format
|
||
msgid "Part name: %1%\n"
|
||
msgstr "Part name: %1%\n"
|
||
|
||
#, boost-format
|
||
msgid "Object name: %1%\n"
|
||
msgstr "Object name: %1%\n"
|
||
|
||
#, boost-format
|
||
msgid "Size: %1% x %2% x %3% in\n"
|
||
msgstr "Size: %1% x %2% x %3% in\n"
|
||
|
||
#, boost-format
|
||
msgid "Size: %1% x %2% x %3% mm\n"
|
||
msgstr "Size: %1% x %2% x %3% mm\n"
|
||
|
||
#, boost-format
|
||
msgid "Volume: %1% in³\n"
|
||
msgstr "Volume: %1% in³\n"
|
||
|
||
#, boost-format
|
||
msgid "Volume: %1% mm³\n"
|
||
msgstr "Volume: %1% mm³\n"
|
||
|
||
#, boost-format
|
||
msgid "Triangles: %1%\n"
|
||
msgstr "Triangles: %1%\n"
|
||
|
||
msgid "Tips:"
|
||
msgstr "Tips:"
|
||
|
||
msgid ""
|
||
"\"Fix Model\" feature is currently only on Windows. Please repair the model "
|
||
"on QIDI Studio(windows) or CAD softwares."
|
||
msgstr ""
|
||
"\"Fix Model\" feature is currently only on Windows. Please repair the model "
|
||
"on QIDI Studio(Windows) or in CAD software."
|
||
|
||
#, c-format, boost-format
|
||
msgid ""
|
||
"Plate% d: %s is not suggested to be used to print filament %s(%s). If you "
|
||
"still want to do this printing, please set this filament's bed temperature "
|
||
"to non zero."
|
||
msgstr ""
|
||
"Plate% d: %s is not suggested to be used to print filament %s(%s). If you "
|
||
"still want to do this printing, please set this filament's bed temperature "
|
||
"to non zero."
|
||
|
||
msgid "The current project has unsaved changes, save it before continuing?"
|
||
msgstr ""
|
||
"The current project has unsaved changes; would you like to save before "
|
||
"continuing?"
|
||
|
||
msgid "Switching the language requires application restart.\n"
|
||
msgstr "Switching the language requires application restart.\n"
|
||
|
||
msgid "Do you want to continue?"
|
||
msgstr "Do you want to continue?"
|
||
|
||
msgid "Language selection"
|
||
msgstr "Language selection"
|
||
|
||
msgid "Switching application language while some presets are modified."
|
||
msgstr "Switching application language while some presets are modified."
|
||
|
||
msgid "Changing application language"
|
||
msgstr "Changing application language"
|
||
|
||
msgid "Changing the region will log out your account.\n"
|
||
msgstr "Changing the region will log you out of your account.\n"
|
||
|
||
msgid "Region selection"
|
||
msgstr "Region selection"
|
||
|
||
msgid "Second"
|
||
msgstr "Second"
|
||
|
||
msgid "Browse"
|
||
msgstr "Browse"
|
||
|
||
msgid "Choose Download Directory"
|
||
msgstr "Choose Download Directory"
|
||
|
||
msgid "General Settings"
|
||
msgstr "General Settings"
|
||
|
||
msgid "Asia-Pacific"
|
||
msgstr "Asia-Pacific"
|
||
|
||
msgid "Chinese Mainland"
|
||
msgstr "Chinese Mainland"
|
||
|
||
msgid "Europe"
|
||
msgstr "Europe"
|
||
|
||
msgid "North America"
|
||
msgstr "North America"
|
||
|
||
msgid "Others"
|
||
msgstr "Others"
|
||
|
||
msgid "Login Region"
|
||
msgstr "Login Region"
|
||
|
||
msgid "Metric"
|
||
msgstr "Metric"
|
||
|
||
msgid "Imperial"
|
||
msgstr "Imperial"
|
||
|
||
msgid "Units"
|
||
msgstr "Units"
|
||
|
||
msgid "Keep only one QIDI Studio instance"
|
||
msgstr "Keep only one QIDI Studio instance"
|
||
|
||
msgid ""
|
||
"On OSX there is always only one instance of app running by default. However "
|
||
"it is allowed to run multiple instances of same app from the command line. "
|
||
"In such case this settings will allow only one instance."
|
||
msgstr ""
|
||
"On OSX there is always only one instance of app running by default. However "
|
||
"it is allowed to run multiple instances of same app from the command line. "
|
||
"In such case this setting will allow only one instance."
|
||
|
||
msgid ""
|
||
"If this is enabled, when starting QIDI Studio and another instance of the "
|
||
"same QIDI Studio is already running, that instance will be reactivated "
|
||
"instead."
|
||
msgstr ""
|
||
"If this is enabled, when starting QIDI Studio and another instance of the "
|
||
"same QIDI Studio is already running, that instance will be reactivated "
|
||
"instead."
|
||
|
||
msgid "Zoom to mouse position"
|
||
msgstr "Zoom to mouse position"
|
||
|
||
msgid ""
|
||
"Zoom in towards the mouse pointer's position in the 3D view, rather than the "
|
||
"2D window center."
|
||
msgstr ""
|
||
"Zoom in towards the mouse pointer's position in the 3D view, rather than the "
|
||
"2D window center."
|
||
|
||
msgid "Auto plate type"
|
||
msgstr "Auto plate type"
|
||
|
||
msgid ""
|
||
"Studio will remember build plate selected last time for certain printer "
|
||
"model."
|
||
msgstr ""
|
||
"Studio will remember build plate selected last time for certain printer "
|
||
"models."
|
||
|
||
msgid "Flushing volumes: Auto-calculate every time when the color is changed."
|
||
msgstr "Flushing volumes: Auto-calculate every time the color is changed."
|
||
|
||
msgid "If enabled, auto-calculate every time when the color is changed."
|
||
msgstr "If enabled, auto-calculate every time when the color is changed."
|
||
|
||
msgid ""
|
||
"Flushing volumes: Auto-calculate every time when the filament is changed."
|
||
msgstr "Flushing volumes: Auto-calculate every time the filament is changed."
|
||
|
||
msgid "If enabled, auto-calculate every time when filament is changed"
|
||
msgstr "If enabled, auto-calculate every time filament is changed"
|
||
|
||
msgid "Multi-device Management(Take effect after restarting Studio)."
|
||
msgstr "Multi-device Management(Take effect after restarting Studio)."
|
||
|
||
msgid ""
|
||
"With this option enabled, you can send a task to multiple devices at the "
|
||
"same time and manage multiple devices."
|
||
msgstr ""
|
||
"With this option enabled, you can send a task to multiple devices at the "
|
||
"same time and manage multiple devices."
|
||
|
||
msgid "Presets"
|
||
msgstr "Presets"
|
||
|
||
msgid "Auto sync user presets(Printer/Filament/Process)"
|
||
msgstr "Auto sync user presets (Printer/Filament/Process)"
|
||
|
||
msgid "User Sync"
|
||
msgstr "User Sync"
|
||
|
||
msgid "Update built-in Presets automatically."
|
||
msgstr "Update built-in Presets automatically."
|
||
|
||
msgid "System Sync"
|
||
msgstr "System Sync"
|
||
|
||
msgid "Clear my choice on the unsaved presets."
|
||
msgstr "Clear my choice on the unsaved presets."
|
||
|
||
msgid "Associate Files To QIDI Studio"
|
||
msgstr "Associate Files To QIDI Studio"
|
||
|
||
msgid "Associate .3mf files to QIDI Studio"
|
||
msgstr "Associate .3mf files to QIDI Studio"
|
||
|
||
msgid "If enabled, sets QIDI Studio as default application to open .3mf files"
|
||
msgstr "If enabled, sets QIDI Studio as default application to open .3mf files"
|
||
|
||
msgid "Associate .stl files to QIDI Studio"
|
||
msgstr "Associate .stl files to QIDI Studio"
|
||
|
||
msgid "If enabled, sets QIDI Studio as default application to open .stl files"
|
||
msgstr "If enabled, sets QIDI Studio as default application to open .stl files"
|
||
|
||
msgid "Associate .step/.stp files to QIDI Studio"
|
||
msgstr "Associate .step/.stp files to QIDI Studio"
|
||
|
||
msgid "If enabled, sets QIDI Studio as default application to open .step files"
|
||
msgstr ""
|
||
"If enabled, sets QIDI Studio as default application to open .step files"
|
||
|
||
msgid "Online Models"
|
||
msgstr "Online Models"
|
||
|
||
msgid "Show online staff-picked models on the home page"
|
||
msgstr "Show online staff-picked models on the home page"
|
||
|
||
msgid "Maximum recent projects"
|
||
msgstr "Maximum recent projects"
|
||
|
||
msgid "Maximum count of recent projects"
|
||
msgstr "Maximum count of recent projects"
|
||
|
||
msgid "Clear my choice on the unsaved projects."
|
||
msgstr "Clear my choice on the unsaved projects."
|
||
|
||
msgid "No warnings when loading 3MF with modified G-codes"
|
||
msgstr "No warnings when loading 3MF with modified G-code"
|
||
|
||
msgid "Auto-Backup"
|
||
msgstr "Auto-Backup"
|
||
|
||
msgid ""
|
||
"Backup your project periodically for restoring from the occasional crash."
|
||
msgstr ""
|
||
"Backup your project periodically for restoring from the occasional crash."
|
||
|
||
msgid "every"
|
||
msgstr "every"
|
||
|
||
msgid "The peroid of backup in seconds."
|
||
msgstr "The peroid of backup in seconds."
|
||
|
||
msgid "Downloads"
|
||
msgstr "Downloads"
|
||
|
||
msgid "Dark Mode"
|
||
msgstr "Dark Mode"
|
||
|
||
msgid "Enable dark mode"
|
||
msgstr "Enable dark mode"
|
||
|
||
msgid "User Experience"
|
||
msgstr "User Experience"
|
||
|
||
msgid "Join Customer Experience Improvement Program."
|
||
msgstr "Join Customer Experience Improvement Program."
|
||
|
||
msgid "What data would be collected?"
|
||
msgstr "What data would be collected?"
|
||
|
||
msgid "Develop Mode"
|
||
msgstr "Develop Mode"
|
||
|
||
msgid "Develop mode"
|
||
msgstr "Develop mode"
|
||
|
||
msgid "Skip AMS blacklist check"
|
||
msgstr "Skip AMS blacklist check"
|
||
|
||
msgid "Home page and daily tips"
|
||
msgstr "Home page and daily tips"
|
||
|
||
msgid "Show home page on startup"
|
||
msgstr "Show home page on startup"
|
||
|
||
msgid "Sync settings"
|
||
msgstr "Sync settings"
|
||
|
||
msgid "User sync"
|
||
msgstr "User sync"
|
||
|
||
msgid "Preset sync"
|
||
msgstr "Preset sync"
|
||
|
||
msgid "Preferences sync"
|
||
msgstr "Preferences sync"
|
||
|
||
msgid "View control settings"
|
||
msgstr "View control settings"
|
||
|
||
msgid "Rotate of view"
|
||
msgstr "Rotate of view"
|
||
|
||
msgid "Move of view"
|
||
msgstr "Move of view"
|
||
|
||
msgid "Zoom of view"
|
||
msgstr "Zoom of view"
|
||
|
||
msgid "Other"
|
||
msgstr "Other"
|
||
|
||
msgid "Mouse wheel reverses when zooming"
|
||
msgstr "Mouse wheel reverses when zooming"
|
||
|
||
msgid "Enable SSL(MQTT)"
|
||
msgstr "Enable SSL(MQTT)"
|
||
|
||
msgid "Enable SSL(FTP)"
|
||
msgstr "Enable SSL(FTP)"
|
||
|
||
msgid "Internal developer mode"
|
||
msgstr "Internal developer mode"
|
||
|
||
msgid "Log Level"
|
||
msgstr "Log Level"
|
||
|
||
msgid "fatal"
|
||
msgstr "fatal"
|
||
|
||
msgid "error"
|
||
msgstr "error"
|
||
|
||
msgid "warning"
|
||
msgstr "warning"
|
||
|
||
msgid "debug"
|
||
msgstr "debug"
|
||
|
||
msgid "trace"
|
||
msgstr "trace"
|
||
|
||
msgid "Host Setting"
|
||
msgstr "Host Setting"
|
||
|
||
msgid "DEV host: api-dev.qidi-lab.com/v1"
|
||
msgstr "DEV host: api-dev.qidi-lab.com/v1"
|
||
|
||
msgid "QA host: api-qa.qidi-lab.com/v1"
|
||
msgstr "QA host: api-qa.qidi-lab.com/v1"
|
||
|
||
msgid "PRE host: api-pre.qidi-lab.com/v1"
|
||
msgstr "PRE host: api-pre.qidi-lab.com/v1"
|
||
|
||
msgid "Product host"
|
||
msgstr "Product host"
|
||
|
||
msgid "debug save button"
|
||
msgstr "debug save button"
|
||
|
||
msgid "save debug settings"
|
||
msgstr "save debug settings"
|
||
|
||
msgid "DEBUG settings have saved successfully!"
|
||
msgstr "DEBUG settings have saved successfully!"
|
||
|
||
msgid "Switch cloud environment, Please login again!"
|
||
msgstr "Switch cloud environment, Please login again!"
|
||
|
||
msgid "System presets"
|
||
msgstr "System presets"
|
||
|
||
msgid "User presets"
|
||
msgstr "User presets"
|
||
|
||
msgid "Incompatible presets"
|
||
msgstr "Incompatible presets"
|
||
|
||
msgid "AMS filaments"
|
||
msgstr "AMS filament"
|
||
|
||
msgid "Click to pick filament color"
|
||
msgstr "Click to select filament color"
|
||
|
||
msgid "Please choose the filament colour"
|
||
msgstr "Please choose the filament colour"
|
||
|
||
msgid "Add/Remove presets"
|
||
msgstr "Add/Remove presets"
|
||
|
||
msgid "Edit preset"
|
||
msgstr "Edit preset"
|
||
|
||
msgid "Project-inside presets"
|
||
msgstr "Project-inside presets"
|
||
|
||
msgid "Add/Remove filaments"
|
||
msgstr "Add/Remove filaments"
|
||
|
||
msgid "Add/Remove materials"
|
||
msgstr "Add/Remove materials"
|
||
|
||
msgid "Select/Remove printers(system presets)"
|
||
msgstr "Select/Remove printers(system presets)"
|
||
|
||
msgid "Create printer"
|
||
msgstr "Create printer"
|
||
|
||
msgid "Incompatible"
|
||
msgstr "Incompatible"
|
||
|
||
msgid "The selected preset is null!"
|
||
msgstr "The selected preset is null!"
|
||
|
||
msgid "End"
|
||
msgstr "End"
|
||
|
||
msgid "Customize"
|
||
msgstr "Customize"
|
||
|
||
msgid "Other layer filament sequence"
|
||
msgstr "Other layer filament sequence"
|
||
|
||
msgid "Please input layer value (>= 2)."
|
||
msgstr "Please input layer value (>= 2)."
|
||
|
||
msgid "Same as Global Print Sequence"
|
||
msgstr "Same as Global Print Sequence"
|
||
|
||
msgid "Print sequence"
|
||
msgstr "Print sequence"
|
||
|
||
msgid "Same as Global"
|
||
msgstr "Same as Global"
|
||
|
||
msgid "Enable"
|
||
msgstr "Enable"
|
||
|
||
msgid "Disable"
|
||
msgstr "Disable"
|
||
|
||
msgid "Spiral vase"
|
||
msgstr "Spiral vase"
|
||
|
||
msgid "First layer filament sequence"
|
||
msgstr "First layer filament sequence"
|
||
|
||
msgid "Same as Global Plate Type"
|
||
msgstr "Same as Global Plate Type"
|
||
|
||
msgid "Same as Global Bed Type"
|
||
msgstr "Same as Global Plate Type"
|
||
|
||
msgid "By Layer"
|
||
msgstr "By Layer"
|
||
|
||
msgid "By Object"
|
||
msgstr "By Object"
|
||
|
||
msgid "Plate name"
|
||
msgstr "Plate name"
|
||
|
||
msgid "Accept"
|
||
msgstr "Accept"
|
||
|
||
msgid "Log Out"
|
||
msgstr "Log Out"
|
||
|
||
msgid "Slice all plate to obtain time and filament estimation"
|
||
msgstr "Slice all plates to obtain time and filament estimation"
|
||
|
||
msgid "Packing project data into 3mf file"
|
||
msgstr "Packing project data into 3mf file"
|
||
|
||
msgid "Uploading 3mf"
|
||
msgstr "Uploading 3mf"
|
||
|
||
msgid "Jump to model publish web page"
|
||
msgstr "Jump to model publish web page"
|
||
|
||
msgid "Note: The preparation may take several minutes. Please be patient."
|
||
msgstr "Note: The preparation may take several minutes. Please be patient."
|
||
|
||
msgid "Publish"
|
||
msgstr "Publish"
|
||
|
||
msgid "Publish was cancelled"
|
||
msgstr "Publish was cancelled"
|
||
|
||
msgid "Slicing Plate 1"
|
||
msgstr "Slicing Plate 1"
|
||
|
||
msgid "Packing data to 3mf"
|
||
msgstr "Packing data to 3mf"
|
||
|
||
msgid "Jump to webpage"
|
||
msgstr "Jump to webpage"
|
||
|
||
#, c-format, boost-format
|
||
msgid "Save %s as"
|
||
msgstr "Save %s as"
|
||
|
||
msgid "User Preset"
|
||
msgstr "User Preset"
|
||
|
||
msgid "Preset Inside Project"
|
||
msgstr "Preset Inside Project"
|
||
|
||
msgid "Name is invalid;"
|
||
msgstr "Name is invalid;"
|
||
|
||
msgid "illegal characters:"
|
||
msgstr "illegal characters:"
|
||
|
||
msgid "illegal suffix:"
|
||
msgstr "illegal suffix:"
|
||
|
||
msgid "Name is unavailable."
|
||
msgstr "Name is unavailable."
|
||
|
||
msgid "Overwrite a system profile is not allowed"
|
||
msgstr "Overwrite a system profile is not allowed"
|
||
|
||
#, boost-format
|
||
msgid "Preset \"%1%\" already exists."
|
||
msgstr "Preset \"%1%\" already exists."
|
||
|
||
#, boost-format
|
||
msgid "Preset \"%1%\" already exists and is incompatible with current printer."
|
||
msgstr ""
|
||
"Preset \"%1%\" already exists and is incompatible with the current printer."
|
||
|
||
msgid "Please note that saving action will replace this preset"
|
||
msgstr "Please note that saving action will replace this preset"
|
||
|
||
msgid "The name is not allowed to be empty."
|
||
msgstr "The name is not allowed to be empty."
|
||
|
||
msgid "The name is not allowed to start with space character."
|
||
msgstr "The name is not allowed to start with a space."
|
||
|
||
msgid "The name is not allowed to end with space character."
|
||
msgstr "The name is not allowed to end with a space."
|
||
|
||
msgid "The name cannot be the same as a preset alias name."
|
||
msgstr "The name cannot be the same as a preset alias name."
|
||
|
||
msgid "Save preset"
|
||
msgstr "Save preset"
|
||
|
||
msgctxt "PresetName"
|
||
msgid "Copy"
|
||
msgstr "Copy"
|
||
|
||
#, boost-format
|
||
msgid "Printer \"%1%\" is selected with preset \"%2%\""
|
||
msgstr "Printer \"%1%\" is selected with preset \"%2%\""
|
||
|
||
#, boost-format
|
||
msgid "Please choose an action with \"%1%\" preset after saving."
|
||
msgstr "Please choose an action with \"%1%\" preset after saving."
|
||
|
||
#, boost-format
|
||
msgid "For \"%1%\", change \"%2%\" to \"%3%\" "
|
||
msgstr "For \"%1%\", change \"%2%\" to \"%3%\" "
|
||
|
||
#, boost-format
|
||
msgid "For \"%1%\", add \"%2%\" as a new preset"
|
||
msgstr "For \"%1%\", add \"%2%\" as a new preset"
|
||
|
||
#, boost-format
|
||
msgid "Simply switch to \"%1%\""
|
||
msgstr "Simply switch to \"%1%\""
|
||
|
||
msgid "Task canceled"
|
||
msgstr "Task canceled"
|
||
|
||
msgid "(LAN)"
|
||
msgstr "(LAN)"
|
||
|
||
msgid "Search"
|
||
msgstr "Search"
|
||
|
||
msgid "My Device"
|
||
msgstr "My Device"
|
||
|
||
msgid "Other Device"
|
||
msgstr "Other Device"
|
||
|
||
msgid "Online"
|
||
msgstr "Online"
|
||
|
||
msgid "Input access code"
|
||
msgstr "Input access code"
|
||
|
||
msgid "Can't find my devices?"
|
||
msgstr "Can't find my devices?"
|
||
|
||
msgid "Log out successful."
|
||
msgstr "Log out successful."
|
||
|
||
msgid "Offline"
|
||
msgstr "Offline"
|
||
|
||
msgid "Busy"
|
||
msgstr "Busy"
|
||
|
||
msgid "QIDI Cool Plate"
|
||
msgstr "QIDI Cool Plate"
|
||
|
||
msgid "PLA Plate"
|
||
msgstr "PLA Plate"
|
||
|
||
msgid "QIDI Engineering Plate"
|
||
msgstr "QIDI Engineering Plate"
|
||
|
||
msgid "QIDI Smooth PEI Plate"
|
||
msgstr "QIDI Smooth PEI Plate"
|
||
|
||
msgid "High temperature Plate"
|
||
msgstr "High temperature Plate"
|
||
|
||
msgid "QIDI Textured PEI Plate"
|
||
msgstr "QIDI Textured PEI Plate"
|
||
|
||
msgid "Send print job to"
|
||
msgstr "Send print job to"
|
||
|
||
msgid "Bed Leveling"
|
||
msgstr "Bed Leveling"
|
||
|
||
msgid "Flow Dynamics Calibration"
|
||
msgstr "Flow Dynamics Calibration"
|
||
|
||
msgid "Click here if you can't connect to the printer"
|
||
msgstr "Click here if you can't connect to the printer"
|
||
|
||
msgid "send completed"
|
||
msgstr "send completed"
|
||
|
||
msgid "Error code"
|
||
msgstr "Error code"
|
||
|
||
msgid "No login account, only printers in LAN mode are displayed"
|
||
msgstr "No login account, only printers in LAN mode are displayed"
|
||
|
||
msgid "Connecting to server"
|
||
msgstr "Connecting to server"
|
||
|
||
msgid "Synchronizing device information"
|
||
msgstr "Synchronizing device information"
|
||
|
||
msgid "Synchronizing device information time out"
|
||
msgstr "Synchronizing device information timed out"
|
||
|
||
msgid "Cannot send the print job when the printer is updating firmware"
|
||
msgstr "Cannot send the print job when the printer is updating firmware"
|
||
|
||
msgid ""
|
||
"The printer is executing instructions. Please restart printing after it ends"
|
||
msgstr ""
|
||
"The printer is executing instructions. Please restart printing after it ends"
|
||
|
||
msgid "The printer is busy on other print job"
|
||
msgstr "The printer is busy with another print job."
|
||
|
||
#, c-format, boost-format
|
||
msgid ""
|
||
"Filament %s exceeds the number of AMS slots. Please update the printer "
|
||
"firmware to support AMS slot assignment."
|
||
msgstr ""
|
||
"Filament %s exceeds the number of AMS slots. Please update the printer "
|
||
"firmware to support AMS slot assignment."
|
||
|
||
msgid ""
|
||
"Filament exceeds the number of AMS slots. Please update the printer firmware "
|
||
"to support AMS slot assignment."
|
||
msgstr ""
|
||
"Filament exceeds the number of AMS slots. Please update the printer firmware "
|
||
"to support AMS slot assignment."
|
||
|
||
msgid ""
|
||
"Filaments to AMS slots mappings have been established. You can click a "
|
||
"filament above to change its mapping AMS slot"
|
||
msgstr ""
|
||
"Filaments to AMS slots mappings have been established. You can click a "
|
||
"filament above to change its mapping AMS slot"
|
||
|
||
msgid ""
|
||
"Please click each filament above to specify its mapping AMS slot before "
|
||
"sending the print job"
|
||
msgstr ""
|
||
"Please click each filament above to specify its mapping AMS slot before "
|
||
"sending the print job"
|
||
|
||
#, c-format, boost-format
|
||
msgid ""
|
||
"Filament %s does not match the filament in AMS slot %s. Please update the "
|
||
"printer firmware to support AMS slot assignment."
|
||
msgstr ""
|
||
"Filament %s does not match the filament in AMS slot %s. Please update the "
|
||
"printer firmware to support AMS slot assignment."
|
||
|
||
msgid ""
|
||
"Filament does not match the filament in AMS slot. Please update the printer "
|
||
"firmware to support AMS slot assignment."
|
||
msgstr ""
|
||
"Filament does not match the filament in AMS slot. Please update the printer "
|
||
"firmware to support AMS slot assignment."
|
||
|
||
msgid ""
|
||
"The printer firmware only supports sequential mapping of filament => AMS "
|
||
"slot."
|
||
msgstr ""
|
||
"The printer firmware only supports sequential mapping of filament => AMS "
|
||
"slot."
|
||
|
||
msgid "An SD card needs to be inserted before printing."
|
||
msgstr "A MicroSD card needs to be inserted before printing."
|
||
|
||
#, c-format, boost-format
|
||
msgid ""
|
||
"The selected printer (%s) is incompatible with the chosen printer profile in "
|
||
"the slicer (%s)."
|
||
msgstr ""
|
||
"The selected printer (%s) is incompatible with the chosen printer profile in "
|
||
"the slicer (%s)."
|
||
|
||
msgid "An SD card needs to be inserted to record timelapse."
|
||
msgstr "A Micro SD card needs to be inserted to record timelapse."
|
||
|
||
msgid ""
|
||
"Cannot send the print job to a printer whose firmware is required to get "
|
||
"updated."
|
||
msgstr ""
|
||
"Cannot send the print job to a printer whose firmware is required to get "
|
||
"updated."
|
||
|
||
msgid "Cannot send the print job for empty plate"
|
||
msgstr "Cannot send the print job for empty plate"
|
||
|
||
msgid "This printer does not support printing all plates"
|
||
msgstr "This printer does not support printing all plates"
|
||
|
||
msgid ""
|
||
"When enable spiral vase mode, machines with I3 structure will not generate "
|
||
"timelapse videos."
|
||
msgstr ""
|
||
"When spiral vase mode is enabled, machines with I3 structure will not "
|
||
"generate timelapse videos."
|
||
|
||
msgid ""
|
||
"Timelapse is not supported because Print sequence is set to \"By object\"."
|
||
msgstr ""
|
||
"Timelapse is not supported because Print sequence is set to \"By object\"."
|
||
|
||
msgid "Errors"
|
||
msgstr "Errors"
|
||
|
||
msgid "Please check the following:"
|
||
msgstr "Please check the following:"
|
||
|
||
msgid ""
|
||
"The printer type selected when generating G-Code is not consistent with the "
|
||
"currently selected printer. It is recommended that you use the same printer "
|
||
"type for slicing."
|
||
msgstr ""
|
||
"The printer type selected when generating G-Code is not consistent with the "
|
||
"currently selected printer. It is recommended that you use the same printer "
|
||
"type for slicing."
|
||
|
||
msgid ""
|
||
"There are some unknown filaments in the AMS mappings. Please check whether "
|
||
"they are the required filaments. If they are okay, press \"Confirm\" to "
|
||
"start printing."
|
||
msgstr ""
|
||
"There are some unknown filaments in the AMS mappings. Please check whether "
|
||
"they are the required filaments. If they are okay, press \"Confirm\" to "
|
||
"start printing."
|
||
|
||
#, c-format, boost-format
|
||
msgid "nozzle in preset: %s %s"
|
||
msgstr "nozzle in preset: %s %s"
|
||
|
||
#, c-format, boost-format
|
||
msgid "nozzle memorized: %.1f %s"
|
||
msgstr "nozzle memorized: %.1f %s"
|
||
|
||
msgid ""
|
||
"Your nozzle diameter in sliced file is not consistent with memorized nozzle. "
|
||
"If you changed your nozzle lately, please go to Device > Printer Parts to "
|
||
"change settings."
|
||
msgstr ""
|
||
"Your nozzle diameter in sliced file is not consistent with the saved nozzle. "
|
||
"If you changed your nozzle lately, please go to Device > Printer Parts to "
|
||
"change settings."
|
||
|
||
#, c-format, boost-format
|
||
msgid ""
|
||
"Printing high temperature material(%s material) with %s may cause nozzle "
|
||
"damage"
|
||
msgstr ""
|
||
"Printing high temperature material(%s material) with %s may cause nozzle "
|
||
"damage"
|
||
|
||
msgid "Please fix the error above, otherwise printing cannot continue."
|
||
msgstr "Please fix the error above, otherwise printing cannot continue."
|
||
|
||
msgid ""
|
||
"Please click the confirm button if you still want to proceed with printing."
|
||
msgstr ""
|
||
"Please click the confirm button if you still want to proceed with printing."
|
||
|
||
msgid ""
|
||
"Connecting to the printer. Unable to cancel during the connection process."
|
||
msgstr ""
|
||
"Connecting to the printer. Unable to cancel during the connection process."
|
||
|
||
msgid "Preparing print job"
|
||
msgstr "Preparing print job"
|
||
|
||
msgid "Abnormal print file data. Please slice again"
|
||
msgstr "Abnormal print file data. Please slice again"
|
||
|
||
msgid "The name length exceeds the limit."
|
||
msgstr "The name length exceeds the limit."
|
||
|
||
msgid ""
|
||
"Caution to use! Flow calibration on Textured PEI Plate may fail due to the "
|
||
"scattered surface."
|
||
msgstr ""
|
||
"Caution to use! Flow calibration on Textured PEI Plate may fail due to the "
|
||
"scattered surface."
|
||
|
||
msgid "Automatic flow calibration using Micro Lidar"
|
||
msgstr "Automatic flow calibration using Micro Lidar"
|
||
|
||
msgid "Modifying the device name"
|
||
msgstr "Modifying the device name"
|
||
|
||
msgid "Bind with Pin Code"
|
||
msgstr "Bind with Pin Code"
|
||
|
||
msgid "Send to Printer SD card"
|
||
msgstr "Send to Printer MicroSD card"
|
||
|
||
msgid "Cannot send the print task when the upgrade is in progress"
|
||
msgstr "Cannot send print tasks when an update is in progress"
|
||
|
||
msgid "The selected printer is incompatible with the chosen printer presets."
|
||
msgstr "The selected printer is incompatible with the chosen printer presets."
|
||
|
||
msgid "An SD card needs to be inserted before send to printer SD card."
|
||
msgstr ""
|
||
"A Micro SD card needs to be inserted before sending to printer SD card."
|
||
|
||
msgid "The printer is required to be in the same LAN as QIDI Studio."
|
||
msgstr "The printer is required to be in the same LAN as QIDI Studio."
|
||
|
||
msgid "The printer does not support sending to printer SD card."
|
||
msgstr "The printer does not support sending to printer Micro SD card."
|
||
|
||
msgid "Slice ok."
|
||
msgstr "Slice ok."
|
||
|
||
msgid "View all Daily tips"
|
||
msgstr "View all Daily tips"
|
||
|
||
msgid "Failed to create socket"
|
||
msgstr "Failed to create socket"
|
||
|
||
msgid "Failed to connect socket"
|
||
msgstr "Failed to connect socket"
|
||
|
||
msgid "Failed to publish login request"
|
||
msgstr "Failed to publish login request"
|
||
|
||
msgid "Get ticket from device timeout"
|
||
msgstr "Timeout getting ticket from device"
|
||
|
||
msgid "Get ticket from server timeout"
|
||
msgstr "Get ticket from server timeout"
|
||
|
||
msgid "Failed to post ticket to server"
|
||
msgstr "Failed to post ticket to server"
|
||
|
||
msgid "Failed to parse login report reason"
|
||
msgstr "Failed to parse login report reason"
|
||
|
||
msgid "Receive login report timeout"
|
||
msgstr "Receive login report timeout"
|
||
|
||
msgid "Unknown Failure"
|
||
msgstr "Unknown Failure"
|
||
|
||
msgid ""
|
||
"Please Find the Pin Code in Account page on printer screen,\n"
|
||
" and type in the Pin Code below."
|
||
msgstr ""
|
||
"Please Find the Pin Code in Account page on printer screen,\n"
|
||
" and type in the Pin Code below."
|
||
|
||
msgid "Can't find Pin Code?"
|
||
msgstr "Can't find Pin Code?"
|
||
|
||
msgid "Pin Code"
|
||
msgstr "Pin Code"
|
||
|
||
msgid "Binding..."
|
||
msgstr "Binding..."
|
||
|
||
msgid "Please confirm on the printer screen"
|
||
msgstr "Please confirm on the printer screen"
|
||
|
||
msgid "Log in failed. Please check the Pin Code."
|
||
msgstr "Log in failed. Please check the Pin Code."
|
||
|
||
msgid "Log in printer"
|
||
msgstr "Log in printer"
|
||
|
||
msgid "Would you like to log in this printer with current account?"
|
||
msgstr "Would you like to log in this printer with the current account?"
|
||
|
||
msgid "Check the reason"
|
||
msgstr "Check the reason"
|
||
|
||
msgid "Read and accept"
|
||
msgstr "Read and accept"
|
||
|
||
msgid "Terms and Conditions"
|
||
msgstr "Terms and Conditions"
|
||
|
||
msgid ""
|
||
"Thank you for purchasing a QIDI Lab device.Before using your QIDI Lab "
|
||
"device, please read the termsand conditions.By clicking to agree to use your "
|
||
"QIDI Lab device, you agree to abide by the Privacy Policy and Terms of "
|
||
"Use(collectively, the \"Terms\"). If you do not comply with or agree to the "
|
||
"QIDI Lab Privacy Policy, please do not use QIDI Lab equipment and services."
|
||
msgstr ""
|
||
"Thank you for purchasing a QIDI Lab device. Before using your QIDI Lab "
|
||
"device, please read the terms and conditions. By clicking to agree to use "
|
||
"your QIDI Lab device, you agree to abide by the Privacy Policy and Terms of "
|
||
"Use (collectively, the \"Terms\"). If you do not comply with or agree to the "
|
||
"QIDI Lab Privacy Policy, please do not use QIDI Lab equipment and services."
|
||
|
||
msgid "and"
|
||
msgstr "and"
|
||
|
||
msgid "Privacy Policy"
|
||
msgstr "Privacy Policy"
|
||
|
||
msgid "We ask for your help to improve everyone's printer"
|
||
msgstr "We ask for your help to improve everyone's printer"
|
||
|
||
msgid "Statement about User Experience Improvement Program"
|
||
msgstr "Statement about User Experience Improvement Program"
|
||
|
||
#, c-format, boost-format
|
||
msgid ""
|
||
"In the 3D Printing community, we learn from each other's successes and "
|
||
"failures to adjust our own slicing parameters and settings. %s follows the "
|
||
"same principle and uses machine learning to improve its performance from the "
|
||
"successes and failures of the vast number of prints by our users. We are "
|
||
"training %s to be smarter by feeding them the real-world data. If you are "
|
||
"willing, this service will access information from your error logs and usage "
|
||
"logs, which may include information described in Privacy Policy. We will "
|
||
"not collect any Personal Data by which an individual can be identified "
|
||
"directly or indirectly, including without limitation names, addresses, "
|
||
"payment information, or phone numbers. By enabling this service, you agree "
|
||
"to these terms and the statement about Privacy Policy."
|
||
msgstr ""
|
||
"In the 3D Printing community, we learn from each other's successes and "
|
||
"failures to adjust our own slicing parameters and settings. %s follows the "
|
||
"same principle and uses machine learning to improve its performance from the "
|
||
"successes and failures of the vast number of prints by our users. We are "
|
||
"training %s to be smarter by feeding them the real-world data. If you are "
|
||
"willing, this service will access information from your error logs and usage "
|
||
"logs, which may include information described in Privacy Policy. We will "
|
||
"not collect any Personal Data by which an individual can be identified "
|
||
"directly or indirectly, including without limitation names, addresses, "
|
||
"payment information, or phone numbers. By enabling this service, you agree "
|
||
"to these terms and the statement about Privacy Policy."
|
||
|
||
msgid "Statement on User Experience Improvement Plan"
|
||
msgstr "Statement on User Experience Improvement Plan"
|
||
|
||
msgid "Log in successful."
|
||
msgstr "Log in successful."
|
||
|
||
msgid "Log out printer"
|
||
msgstr "Log out printer"
|
||
|
||
msgid "Would you like to log out the printer?"
|
||
msgstr "Would you like to log out the printer?"
|
||
|
||
msgid "Please log in first."
|
||
msgstr "Please log in first."
|
||
|
||
msgid "There was a problem connecting to the printer. Please try again."
|
||
msgstr "There was a problem connecting to the printer. Please try again."
|
||
|
||
msgid "Failed to log out."
|
||
msgstr "Failed to log out."
|
||
|
||
#. TRN "Save current Settings"
|
||
#, c-format, boost-format
|
||
msgid "Save current %s"
|
||
msgstr "Save current %s"
|
||
|
||
msgid "Delete this preset"
|
||
msgstr "Delete this preset"
|
||
|
||
msgid "Search in preset"
|
||
msgstr "Search in preset"
|
||
|
||
msgid "Click to reset all settings to the last saved preset."
|
||
msgstr "Click to reset all settings to the last saved preset."
|
||
|
||
msgid ""
|
||
"Prime tower is required for smooth timeplase. There may be flaws on the "
|
||
"model without prime tower. Are you sure you want to disable prime tower?"
|
||
msgstr ""
|
||
"Prime tower is required for smooth timeplase. There may be flaws on the "
|
||
"model without prime tower. Are you sure you want to disable prime tower?"
|
||
|
||
msgid ""
|
||
"Prime tower is required for smooth timelapse. There may be flaws on the "
|
||
"model without prime tower. Do you want to enable prime tower?"
|
||
msgstr ""
|
||
"Prime tower is required for smooth timelapse. There may be flaws on the "
|
||
"model without prime tower. Do you want to enable prime tower?"
|
||
|
||
msgid "Still print by object?"
|
||
msgstr "Still print by object?"
|
||
|
||
msgid ""
|
||
"We have added an experimental style \"Tree Slim\" that features smaller "
|
||
"support volume but weaker strength.\n"
|
||
"We recommend using it with: 0 interface layers, 0 top distance, 2 walls."
|
||
msgstr ""
|
||
"We have added an experimental style \"Tree Slim\" that features smaller "
|
||
"support volume but weaker strength.\n"
|
||
"We recommend using it with: 0 interface layers, 0 top distance, 2 walls."
|
||
|
||
msgid ""
|
||
"Change these settings automatically? \n"
|
||
"Yes - Change these settings automatically\n"
|
||
"No - Do not change these settings for me"
|
||
msgstr ""
|
||
"Change these settings automatically? \n"
|
||
"Yes - Change these settings automatically\n"
|
||
"No - Do not change these settings for me"
|
||
|
||
msgid ""
|
||
"For \"Tree Strong\" and \"Tree Hybrid\" styles, we recommend the following "
|
||
"settings: at least 2 interface layers, at least 0.1mm top z distance or "
|
||
"using support materials on interface."
|
||
msgstr ""
|
||
"For \"Tree Strong\" and \"Tree Hybrid\" styles, we recommend the following "
|
||
"settings: at least 2 interface layers, at least 0.1mm top z distance or "
|
||
"using support materials on interface."
|
||
|
||
msgid ""
|
||
"When using support material for the support interface, We recommend the "
|
||
"following settings:\n"
|
||
"0 top z distance, 0 interface spacing, interlaced rectilinear pattern and "
|
||
"disable independent support layer height"
|
||
msgstr ""
|
||
"When using support material for the support interface, We recommend the "
|
||
"following settings:\n"
|
||
"0 top z distance, 0 interface spacing, interlaced rectilinear pattern and "
|
||
"disable independent support layer height"
|
||
|
||
msgid ""
|
||
"Layer height exceeds the limit in Printer Settings -> Extruder -> Layer "
|
||
"height limits ,this may cause printing quality issues."
|
||
msgstr ""
|
||
"Layer height exceeds the limit in Printer Settings -> Extruder -> Layer "
|
||
"height limits ,this may cause printing quality issues."
|
||
|
||
msgid "Adjust to the set range automatically? \n"
|
||
msgstr "Adjust to the set range automatically? \n"
|
||
|
||
msgid "Adjust"
|
||
msgstr "Adjust"
|
||
|
||
msgid "Ignore"
|
||
msgstr "Ignore"
|
||
|
||
msgid ""
|
||
"Experimental feature: Retracting and cutting off the filament at a greater "
|
||
"distance during filament changes to minimize flush.Although it can notably "
|
||
"reduce flush, it may also elevate the risk of nozzle clogs or other "
|
||
"printing complications."
|
||
msgstr ""
|
||
"Experimental feature: Retracting and cutting off the filament at a greater "
|
||
"distance during filament changes to minimize flush. Although it can notably "
|
||
"reduce flush, it may also elevate the risk of nozzle clogs or other "
|
||
"printing complications."
|
||
|
||
msgid ""
|
||
"Experimental feature: Retracting and cutting off the filament at a greater "
|
||
"distance during filament changes to minimize flush.Although it can notably "
|
||
"reduce flush, it may also elevate the risk of nozzle clogs or other printing "
|
||
"complications.Please use with the latest printer firmware."
|
||
msgstr ""
|
||
"Experimental feature: Retracting and cutting off the filament at a greater "
|
||
"distance during filament changes to minimize flush. Although it can notably "
|
||
"reduce flush, it may also elevate the risk of nozzle clogs or other printing "
|
||
"complications. Please use with the latest printer firmware."
|
||
|
||
msgid ""
|
||
"When recording timelapse without toolhead, it is recommended to add a "
|
||
"\"Timelapse Wipe Tower\" \n"
|
||
"by right-click the empty position of build plate and choose \"Add "
|
||
"Primitive\"->\"Timelapse Wipe Tower\"."
|
||
msgstr ""
|
||
"When recording timelapse without toolhead, it is recommended to add a "
|
||
"\"Timelapse Wipe Tower\" \n"
|
||
"by right-click the empty position of build plate and choose \"Add "
|
||
"Primitive\"->\"Timelapse Wipe Tower\"."
|
||
|
||
msgid "Line width"
|
||
msgstr "Line width"
|
||
|
||
msgid "Seam"
|
||
msgstr "Seam"
|
||
|
||
msgid "Precision"
|
||
msgstr "Precision"
|
||
|
||
msgid "Wall generator"
|
||
msgstr "Wall generator"
|
||
|
||
msgid "Walls"
|
||
msgstr "Walls"
|
||
|
||
msgid "Top/bottom shells"
|
||
msgstr "Top/bottom shells"
|
||
|
||
msgid "Sparse infill"
|
||
msgstr "Sparse infill"
|
||
|
||
msgid "Initial layer speed"
|
||
msgstr "Initial layer speed"
|
||
|
||
msgid "Other layers speed"
|
||
msgstr "Other layers speed"
|
||
|
||
msgid "Overhang speed"
|
||
msgstr "Overhang speed"
|
||
|
||
msgid ""
|
||
"This is the speed for various overhang degrees. Overhang degrees are "
|
||
"expressed as a percentage of line width. 0 speed means no slowing down for "
|
||
"the overhang degree range and wall speed is used"
|
||
msgstr ""
|
||
"This is the speed for various overhang degrees. Overhang degrees are "
|
||
"expressed as a percentage of line width. 0 speed means no slowing down for "
|
||
"the overhang degree range and wall speed is used"
|
||
|
||
msgid "Travel speed"
|
||
msgstr "Travel speed"
|
||
|
||
msgid "Acceleration"
|
||
msgstr "Acceleration"
|
||
|
||
msgid "Jerk(XY)"
|
||
msgstr "Jerk(XY)"
|
||
|
||
msgid "Raft"
|
||
msgstr "Raft"
|
||
|
||
msgid "Support filament"
|
||
msgstr "Filament for Supports"
|
||
|
||
msgid "Tree Support"
|
||
msgstr ""
|
||
|
||
msgid "Prime tower"
|
||
msgstr "Prime tower"
|
||
|
||
msgid "Special mode"
|
||
msgstr "Special mode"
|
||
|
||
msgid "G-code output"
|
||
msgstr "G-code output"
|
||
|
||
msgid "Post-processing scripts"
|
||
msgstr "Post-processing scripts"
|
||
|
||
msgid "Notes"
|
||
msgstr "Notes"
|
||
|
||
msgid "Frequent"
|
||
msgstr "Frequent"
|
||
|
||
#, c-format, boost-format
|
||
msgid ""
|
||
"Following line %s contains reserved keywords.\n"
|
||
"Please remove it, or will beat G-code visualization and printing time "
|
||
"estimation."
|
||
msgid_plural ""
|
||
"Following lines %s contain reserved keywords.\n"
|
||
"Please remove them, or will beat G-code visualization and printing time "
|
||
"estimation."
|
||
msgstr[0] ""
|
||
"Following line %s contains reserved keywords.\n"
|
||
"Please remove it, or G-code visualization and print time estimation will be "
|
||
"broken."
|
||
msgstr[1] ""
|
||
"Following lines %s contain reserved keywords.\n"
|
||
"Please remove them, or G-code visualization and print time estimation will "
|
||
"be broken."
|
||
|
||
msgid "Reserved keywords found"
|
||
msgstr "Reserved keywords found"
|
||
|
||
msgid "Setting Overrides"
|
||
msgstr "Setting Overrides"
|
||
|
||
msgid "Retraction"
|
||
msgstr "Retraction"
|
||
|
||
msgid "Basic information"
|
||
msgstr "Basic information"
|
||
|
||
msgid "Recommended nozzle temperature"
|
||
msgstr "Recommended nozzle temperature"
|
||
|
||
msgid "Recommended nozzle temperature range of this filament. 0 means no set"
|
||
msgstr "Recommended nozzle temperature range of this filament. 0 means not set"
|
||
|
||
msgid "Print temperature"
|
||
msgstr "Print temperature"
|
||
|
||
msgid "Nozzle"
|
||
msgstr "Nozzle"
|
||
|
||
msgid "Nozzle temperature when printing"
|
||
msgstr "Nozzle temperature when printing"
|
||
|
||
msgid "Cool Plate / PLA Plate"
|
||
msgstr "Cool Plate / PLA Plate"
|
||
|
||
msgid ""
|
||
"Bed temperature when cool plate is installed. Value 0 means the filament "
|
||
"does not support to print on the Cool Plate"
|
||
msgstr ""
|
||
"This is the bed temperature when the cool plate is installed. A value of 0 "
|
||
"means the filament does not support printing on the Cool Plate."
|
||
|
||
msgid "Engineering Plate"
|
||
msgstr "Engineering Plate"
|
||
|
||
msgid ""
|
||
"Bed temperature when engineering plate is installed. Value 0 means the "
|
||
"filament does not support to print on the Engineering Plate"
|
||
msgstr ""
|
||
"This is the bed temperature when the engineering plate is installed. A value "
|
||
"of 0 means the filament does not support printing on the Engineering Plate."
|
||
|
||
msgid "Smooth PEI Plate / High Temp Plate"
|
||
msgstr "Smooth PEI Plate / High Temp Plate"
|
||
|
||
msgid ""
|
||
"Bed temperature when Smooth PEI Plate/High temperature plate is installed. "
|
||
"Value 0 means the filament does not support to print on the Smooth PEI Plate/"
|
||
"High Temp Plate"
|
||
msgstr ""
|
||
"Bed temperature when Smooth PEI Plate/High temperature plate is installed. "
|
||
"Value 0 means the filament does not support to print on the Smooth PEI Plate/"
|
||
"High Temp Plate"
|
||
|
||
msgid "Textured PEI Plate"
|
||
msgstr "Textured PEI Plate"
|
||
|
||
msgid ""
|
||
"Bed temperature when Textured PEI Plate is installed. Value 0 means the "
|
||
"filament does not support to print on the Textured PEI Plate"
|
||
msgstr ""
|
||
"Bed temperature when Textured PEI Plate is installed. Value 0 means the "
|
||
"filament does not support to print on the Textured PEI Plate"
|
||
|
||
msgid "Volumetric speed limitation"
|
||
msgstr "Volumetric speed limitation"
|
||
|
||
msgid "Cooling"
|
||
msgstr "Cooling"
|
||
|
||
msgid "Cooling for specific layer"
|
||
msgstr "Cooling for specific layer"
|
||
|
||
msgid "Part cooling fan"
|
||
msgstr "Part cooling fan"
|
||
|
||
msgid "Min fan speed threshold"
|
||
msgstr "Min fan speed threshold"
|
||
|
||
msgid ""
|
||
"Part cooling fan speed will start to run at min speed when the estimated "
|
||
"layer time is no longer than the layer time in setting. When layer time is "
|
||
"shorter than threshold, fan speed is interpolated between the minimum and "
|
||
"maximum fan speed according to layer printing time"
|
||
msgstr ""
|
||
"The part cooling fan will run at the minimum fan speed when the estimated "
|
||
"layer time is longer than the threshold value. When the layer time is "
|
||
"shorter than the threshold, the fan speed will be interpolated between the "
|
||
"minimum and maximum fan speed according to layer printing time."
|
||
|
||
msgid "Max fan speed threshold"
|
||
msgstr "Max fan speed threshold"
|
||
|
||
msgid ""
|
||
"Part cooling fan speed will be max when the estimated layer time is shorter "
|
||
"than the setting value"
|
||
msgstr ""
|
||
"The part cooling fan will run at maximum speed when the estimated layer time "
|
||
"is shorter than the threshold value."
|
||
|
||
msgid "Auxiliary part cooling fan"
|
||
msgstr "Auxiliary part cooling fan"
|
||
|
||
msgid "Exhaust fan"
|
||
msgstr "Exhaust fan"
|
||
|
||
msgid "During print"
|
||
msgstr "During print"
|
||
|
||
msgid "Complete print"
|
||
msgstr "Complete print"
|
||
|
||
msgid "Filament start G-code"
|
||
msgstr "Filament start G-code"
|
||
|
||
msgid "Filament end G-code"
|
||
msgstr "Filament end G-code"
|
||
|
||
msgid "Printable space"
|
||
msgstr "Printable space"
|
||
|
||
msgid "Extruder Clearance"
|
||
msgstr "Extruder Clearance"
|
||
|
||
msgid "Accessory"
|
||
msgstr "Accessory"
|
||
|
||
msgid "Machine gcode"
|
||
msgstr "Machine gcode"
|
||
|
||
msgid "Machine start G-code"
|
||
msgstr "Machine start G-code"
|
||
|
||
msgid "Machine end G-code"
|
||
msgstr "Machine end G-code"
|
||
|
||
msgid "Printing by object G-code"
|
||
msgstr "Printing by object G-code"
|
||
|
||
msgid "Before layer change G-code"
|
||
msgstr "Before layer change G-code"
|
||
|
||
msgid "Layer change G-code"
|
||
msgstr "Layer change G-code"
|
||
|
||
msgid "Time lapse G-code"
|
||
msgstr "Time lapse G-code"
|
||
|
||
msgid "Change filament G-code"
|
||
msgstr "Change filament G-code"
|
||
|
||
msgid "Pause G-code"
|
||
msgstr "Pause G-code"
|
||
|
||
msgid "Template Custom G-code"
|
||
msgstr "Template Custom G-code"
|
||
|
||
msgid "Motion ability"
|
||
msgstr "Motion ability"
|
||
|
||
msgid "Normal"
|
||
msgstr "Normal"
|
||
|
||
msgid "Speed limitation"
|
||
msgstr "Speed limitation"
|
||
|
||
msgid "Acceleration limitation"
|
||
msgstr "Acceleration limitation"
|
||
|
||
msgid "Jerk limitation"
|
||
msgstr "Jerk limitation"
|
||
|
||
msgid "Layer height limits"
|
||
msgstr "Layer height limits"
|
||
|
||
msgid "Retraction when switching material"
|
||
msgstr "Retraction when switching material"
|
||
|
||
msgid ""
|
||
"The Wipe option is not available when using the Firmware Retraction mode.\n"
|
||
"\n"
|
||
"Shall I disable it in order to enable Firmware Retraction?"
|
||
msgstr ""
|
||
"The Wipe option is not available when using the Firmware Retraction mode.\n"
|
||
"\n"
|
||
"Disable it in order to enable Firmware Retraction?"
|
||
|
||
msgid "Firmware Retraction"
|
||
msgstr "Firmware Retraction"
|
||
|
||
msgid "Detached"
|
||
msgstr "Detached"
|
||
|
||
#, c-format, boost-format
|
||
msgid ""
|
||
"%d Filament Preset and %d Process Preset is attached to this printer. Those "
|
||
"presets would be deleted if the printer is deleted."
|
||
msgstr ""
|
||
"%d Filament Preset and %d Process Preset is attached to this printer. Those "
|
||
"presets would be deleted if the printer is deleted."
|
||
|
||
msgid "Presets inherited by other presets can not be deleted!"
|
||
msgstr "Presets inherited by other presets can not be deleted!"
|
||
|
||
msgid "The following presets inherit this preset."
|
||
msgid_plural "The following preset inherits this preset."
|
||
msgstr[0] ""
|
||
msgstr[1] ""
|
||
|
||
#. TRN Remove/Delete
|
||
#, boost-format
|
||
msgid "%1% Preset"
|
||
msgstr "%1% Preset"
|
||
|
||
msgid "Following preset will be deleted too."
|
||
msgid_plural "Following presets will be deleted too."
|
||
msgstr[0] "The following preset will be deleted too:"
|
||
msgstr[1] "The following presets will be deleted too:"
|
||
|
||
msgid ""
|
||
"Are you sure to delete the selected preset? \n"
|
||
"If the preset corresponds to a filament currently in use on your printer, "
|
||
"please reset the filament information for that slot."
|
||
msgstr ""
|
||
"Are you sure to delete the selected preset? \n"
|
||
"If the preset corresponds to a filament currently in use on your printer, "
|
||
"please reset the filament information for that slot."
|
||
|
||
#, boost-format
|
||
msgid "Are you sure to %1% the selected preset?"
|
||
msgstr "Are you sure you want to %1% the selected preset?"
|
||
|
||
msgid "All"
|
||
msgstr "All"
|
||
|
||
msgid "Set"
|
||
msgstr "Set"
|
||
|
||
msgid "Click to reset current value and attach to the global value."
|
||
msgstr "Click to reset current value and attach to the global value."
|
||
|
||
msgid "Click to drop current modify and reset to saved value."
|
||
msgstr "Click to drop current modifications and reset to saved value."
|
||
|
||
msgid "Process Settings"
|
||
msgstr "Process Settings"
|
||
|
||
msgid "Undef"
|
||
msgstr "Undef"
|
||
|
||
msgid "Discard or Use Modified Value"
|
||
msgstr "Discard or Use Modified Value"
|
||
|
||
msgid "Save or Discard Modified Value"
|
||
msgstr "Save or Discard Modified Value"
|
||
|
||
msgid "Unsaved Changes"
|
||
msgstr "Unsaved Changes"
|
||
|
||
msgid "Use Modified Value of Process Preset"
|
||
msgstr "Use Modified Value of Process Preset"
|
||
|
||
msgid "Use Modified Value of Filament Preset"
|
||
msgstr "Use Modified Value of Filament Preset"
|
||
|
||
msgid "Use Modified Value of Printer Preset"
|
||
msgstr "Use Modified Value of Printer Preset"
|
||
|
||
msgid "Preset(Old)"
|
||
msgstr "Preset (Old)"
|
||
|
||
msgid "Modified Value(New)"
|
||
msgstr "Modified Value (New)"
|
||
|
||
msgid "Save Modified Value"
|
||
msgstr "Save Modified Value"
|
||
|
||
msgid "Don't save"
|
||
msgstr "Don't save"
|
||
|
||
msgid "Discard Modified Value"
|
||
msgstr "Discard Modified Value"
|
||
|
||
msgid "Use Modified Value"
|
||
msgstr "Use Modified Value"
|
||
|
||
msgid "Click the right mouse button to display the full text."
|
||
msgstr "Click the right mouse button to display the full text."
|
||
|
||
msgid "All changes will not be saved"
|
||
msgstr "All changes will not be saved"
|
||
|
||
msgid "All changes will be discarded."
|
||
msgstr "All changes will be discarded."
|
||
|
||
msgid "Save the selected options."
|
||
msgstr "Save the selected options."
|
||
|
||
msgid "Keep the selected options."
|
||
msgstr "Keep the selected options."
|
||
|
||
msgid "Transfer the selected options to the newly selected preset."
|
||
msgstr "Transfer the selected options to the newly selected preset."
|
||
|
||
#, boost-format
|
||
msgid ""
|
||
"Save the selected options to preset \n"
|
||
"\"%1%\"."
|
||
msgstr ""
|
||
"Save the selected options to preset \n"
|
||
"\"%1%\"."
|
||
|
||
#, boost-format
|
||
msgid ""
|
||
"Transfer the selected options to the newly selected preset \n"
|
||
"\"%1%\"."
|
||
msgstr ""
|
||
"Transfer the selected options to the newly selected preset \n"
|
||
"\"%1%\"."
|
||
|
||
#, boost-format
|
||
msgid "Preset \"%1%\" contains the following unsaved changes:"
|
||
msgstr "Preset \"%1%\" contains the following unsaved changes:"
|
||
|
||
#, boost-format
|
||
msgid ""
|
||
"Preset \"%1%\" is not compatible with the new printer profile and it "
|
||
"contains the following unsaved changes:"
|
||
msgstr ""
|
||
"Preset \"%1%\" is not compatible with the new printer profile and it "
|
||
"contains the following unsaved changes:"
|
||
|
||
#, boost-format
|
||
msgid ""
|
||
"Preset \"%1%\" is not compatible with the new process profile and it "
|
||
"contains the following unsaved changes:"
|
||
msgstr ""
|
||
"Preset \"%1%\" is not compatible with the new process profile and it "
|
||
"contains the following unsaved changes:"
|
||
|
||
#, boost-format
|
||
msgid "You have changed some settings of preset \"%1%\". "
|
||
msgstr "You have changed some settings of preset \"%1%\". "
|
||
|
||
msgid ""
|
||
"\n"
|
||
"You can save or discard the preset values you have modified."
|
||
msgstr ""
|
||
"\n"
|
||
"You can save or discard the preset values you have modified."
|
||
|
||
msgid ""
|
||
"\n"
|
||
"You can save or discard the preset values you have modified, or choose to "
|
||
"continue using the values you have modified on the new preset."
|
||
msgstr ""
|
||
"\n"
|
||
"You can save or discard the preset values you have modified, or you can "
|
||
"choose to continue using the values you have modified on the new preset."
|
||
|
||
msgid "You have previously modified your settings."
|
||
msgstr "You have previously modified your settings."
|
||
|
||
msgid ""
|
||
"\n"
|
||
"You can discard the preset values you have modified, or choose to continue "
|
||
"using the modified values in the new project"
|
||
msgstr ""
|
||
"\n"
|
||
"You can discard the preset values you have modified or choose to continue "
|
||
"using the modified values in the new project"
|
||
|
||
msgid "Extruders count"
|
||
msgstr "Extruder count"
|
||
|
||
msgid "General"
|
||
msgstr "General"
|
||
|
||
msgid "Capabilities"
|
||
msgstr "Capabilities"
|
||
|
||
msgid "Select presets to compare"
|
||
msgstr "Select presets to compare"
|
||
|
||
msgid "Show all presets (including incompatible)"
|
||
msgstr "Show all presets (including incompatible)"
|
||
|
||
msgid "Add File"
|
||
msgstr "Add File"
|
||
|
||
msgid "Set as cover"
|
||
msgstr "Set as cover"
|
||
|
||
msgid "Cover"
|
||
msgstr "Cover"
|
||
|
||
#, boost-format
|
||
msgid "The name \"%1%\" already exists."
|
||
msgstr "The name \"%1%\" already exists."
|
||
|
||
msgid "Basic Info"
|
||
msgstr "Basic Info"
|
||
|
||
msgid "Pictures"
|
||
msgstr "Pictures"
|
||
|
||
msgid "Bill of Materials"
|
||
msgstr "Bill of Materials"
|
||
|
||
msgid "Assembly Guide"
|
||
msgstr "Assembly Guide"
|
||
|
||
msgid "Author"
|
||
msgstr "Author"
|
||
|
||
msgid "Model Name"
|
||
msgstr "Model Name"
|
||
|
||
#, c-format, boost-format
|
||
msgid "%s Update"
|
||
msgstr "%s Update"
|
||
|
||
msgid "A new version is available"
|
||
msgstr "A new version is available"
|
||
|
||
msgid "Configuration update"
|
||
msgstr "Configuration update"
|
||
|
||
msgid "A new configuration package available, Do you want to install it?"
|
||
msgstr "A new configuration package available, Do you want to install it?"
|
||
|
||
msgid "Description:"
|
||
msgstr "Description:"
|
||
|
||
msgid "Configuration incompatible"
|
||
msgstr "Configuration incompatible"
|
||
|
||
msgid "the configuration package is incompatible with current application."
|
||
msgstr ""
|
||
"the configuration package is incompatible with the current application."
|
||
|
||
#, c-format, boost-format
|
||
msgid ""
|
||
"The configuration package is incompatible with current application.\n"
|
||
"%s will update the configuration package, Otherwise it won't be able to start"
|
||
msgstr ""
|
||
"The configuration package is incompatible with current application.\n"
|
||
"%s will update the configuration package, Otherwise it won't be able to start"
|
||
|
||
#, c-format, boost-format
|
||
msgid "Exit %s"
|
||
msgstr "Exit %s"
|
||
|
||
msgid "the Configuration package is incompatible with current APP."
|
||
msgstr "the Configuration package is incompatible with current APP."
|
||
|
||
msgid "Configuration updates"
|
||
msgstr "Configuration updates"
|
||
|
||
msgid "No updates available."
|
||
msgstr "No updates available."
|
||
|
||
msgid "The configuration is up to date."
|
||
msgstr "The configuration is up to date."
|
||
|
||
msgid "Obj file Import color"
|
||
msgstr "Obj file Import color"
|
||
|
||
msgid "Specify number of colors:"
|
||
msgstr "Specify number of colors:"
|
||
|
||
#, c-format, boost-format
|
||
msgid "The color count should be in range [%d, %d]."
|
||
msgstr "The color count should be in range [%d, %d]."
|
||
|
||
msgid "Recommended "
|
||
msgstr "Recommended "
|
||
|
||
msgid "Current filament colors:"
|
||
msgstr "Current filament colors:"
|
||
|
||
msgid "Quick set:"
|
||
msgstr "Quick set:"
|
||
|
||
msgid "Color match"
|
||
msgstr "Color match"
|
||
|
||
msgid "Approximate color matching."
|
||
msgstr "Approximate color matching."
|
||
|
||
msgid "Append"
|
||
msgstr "Append"
|
||
|
||
msgid "Add consumable extruder after existing extruders."
|
||
msgstr "Add consumable extruder after existing extruders."
|
||
|
||
msgid "Reset mapped extruders."
|
||
msgstr "Reset mapped extruders."
|
||
|
||
msgid "Cluster colors"
|
||
msgstr "Cluster colors"
|
||
|
||
msgid "Map Filament"
|
||
msgstr "Map Filament"
|
||
|
||
msgid ""
|
||
"Note:The color has been selected, you can choose OK \n"
|
||
" to continue or manually adjust it."
|
||
msgstr ""
|
||
"Note:The color has been selected, you can choose OK \n"
|
||
" to continue or manually adjust it."
|
||
|
||
msgid ""
|
||
"Waring:The count of newly added and \n"
|
||
" current extruders exceeds 16."
|
||
msgstr ""
|
||
"Warning: The count of newly added and \n"
|
||
" current extruders exceeds 16."
|
||
|
||
msgid "Auto-Calc"
|
||
msgstr "Auto-Calc"
|
||
|
||
msgid "Re-calculate"
|
||
msgstr "Re-calculate"
|
||
|
||
msgid "Flushing volumes for filament change"
|
||
msgstr "Flushing volumes for filament change"
|
||
|
||
msgid ""
|
||
"Studio would re-calculate your flushing volumes everytime the filaments "
|
||
"color changed or filaments changed. You could disable the auto-calculate in "
|
||
"QIDI Studio > Preferences"
|
||
msgstr ""
|
||
"Studio would re-calculate your flushing volumes everytime the filaments "
|
||
"color changed or filaments changed. You could disable the auto-calculate in "
|
||
"QIDI Studio > Preferences"
|
||
|
||
msgid "Flushing volume (mm³) for each filament pair."
|
||
msgstr "Flushing volume (mm³) for each filament pair."
|
||
|
||
#, c-format, boost-format
|
||
msgid "Suggestion: Flushing Volume in range [%d, %d]"
|
||
msgstr "Suggestion: Flushing Volume in range [%d, %d]"
|
||
|
||
#, c-format, boost-format
|
||
msgid "The multiplier should be in range [%.2f, %.2f]."
|
||
msgstr "The multiplier should be in range [%.2f, %.2f]."
|
||
|
||
msgid "Multiplier"
|
||
msgstr "Multiplier"
|
||
|
||
msgid "unloaded"
|
||
msgstr "unloaded"
|
||
|
||
msgid "loaded"
|
||
msgstr "loaded"
|
||
|
||
msgid "Filament #"
|
||
msgstr "Filament #"
|
||
|
||
msgid "From"
|
||
msgstr "From"
|
||
|
||
msgid "To"
|
||
msgstr "To"
|
||
|
||
msgid "QIDI Network plug-in not detected."
|
||
msgstr "QIDI Network plug-in not detected."
|
||
|
||
msgid "Click here to download it."
|
||
msgstr "Click here to download it."
|
||
|
||
msgid "Login"
|
||
msgstr "Login"
|
||
|
||
msgid "The configuration package is changed to the previous Config Guide"
|
||
msgstr "The configuration package is changed to the previous Config Guide"
|
||
|
||
msgid "Configuration package changed"
|
||
msgstr "Configuration package changed"
|
||
|
||
msgid "Toolbar"
|
||
msgstr "Toolbar"
|
||
|
||
msgid "Objects list"
|
||
msgstr "Objects list"
|
||
|
||
msgid "Import geometry data from STL/STEP/3MF/OBJ/AMF files"
|
||
msgstr "Import geometry data from STL/STEP/3MF/OBJ/AMF files"
|
||
|
||
msgid "Paste from clipboard"
|
||
msgstr "Paste from clipboard"
|
||
|
||
msgid "Show/Hide 3Dconnexion devices settings dialog"
|
||
msgstr "Show/Hide 3Dconnexion devices settings dialog"
|
||
|
||
msgid "Switch tab page"
|
||
msgstr "Switch tab page"
|
||
|
||
msgid "Show keyboard shortcuts list"
|
||
msgstr "Show keyboard shortcuts list"
|
||
|
||
msgid "Global shortcuts"
|
||
msgstr "Global shortcuts"
|
||
|
||
msgid "Rotate View"
|
||
msgstr "Rotate View"
|
||
|
||
msgid "Pan View"
|
||
msgstr "Pan View"
|
||
|
||
msgid "Mouse wheel"
|
||
msgstr "Mouse wheel"
|
||
|
||
msgid "Zoom View"
|
||
msgstr "Zoom View"
|
||
|
||
msgid "Shift+A"
|
||
msgstr "Shift+A"
|
||
|
||
msgid "Shift+R"
|
||
msgstr "Shift+R"
|
||
|
||
msgid ""
|
||
"Auto orientates selected objects or all objects.If there are selected "
|
||
"objects, it just orientates the selected ones.Otherwise, it will orientates "
|
||
"all objects in the current disk."
|
||
msgstr ""
|
||
"Auto orientates selected objects or all objects.If there are selected "
|
||
"objects, it just orientates the selected ones.Otherwise, it will orientates "
|
||
"all objects in the current disk."
|
||
|
||
msgid "Shift+Tab"
|
||
msgstr "Shift+Tab"
|
||
|
||
msgid "Collapse/Expand the sidebar"
|
||
msgstr "Collapse/Expand the sidebar"
|
||
|
||
msgid "Any arrow"
|
||
msgstr "Any arrow"
|
||
|
||
msgid "Movement in camera space"
|
||
msgstr "Movement in camera space"
|
||
|
||
msgid "Select a part"
|
||
msgstr "Select a part"
|
||
|
||
msgid "Select multiple objects"
|
||
msgstr "Select multiple objects"
|
||
|
||
msgid "Shift+Left mouse button"
|
||
msgstr "Shift+Left mouse button"
|
||
|
||
msgid "Select objects by rectangle"
|
||
msgstr "Select objects by rectangle"
|
||
|
||
msgid "Arrow Up"
|
||
msgstr "Arrow Up"
|
||
|
||
msgid "Move selection 10 mm in positive Y direction"
|
||
msgstr "Move selection 10mm in positive Y direction"
|
||
|
||
msgid "Arrow Down"
|
||
msgstr "Arrow Down"
|
||
|
||
msgid "Move selection 10 mm in negative Y direction"
|
||
msgstr "Move selection 10mm in negative Y direction"
|
||
|
||
msgid "Arrow Left"
|
||
msgstr "Arrow Left"
|
||
|
||
msgid "Move selection 10 mm in negative X direction"
|
||
msgstr "Move selection 10mm in negative X direction"
|
||
|
||
msgid "Arrow Right"
|
||
msgstr "Arrow Right"
|
||
|
||
msgid "Move selection 10 mm in positive X direction"
|
||
msgstr "Move selection 10mm in positive X direction"
|
||
|
||
msgid "Shift+Any arrow"
|
||
msgstr "Shift+Any arrow"
|
||
|
||
msgid "Movement step set to 1 mm"
|
||
msgstr "Movement step set to 1mm"
|
||
|
||
msgid "keyboard 1-9: set filament for object/part"
|
||
msgstr "Keyboard 1-9: set filament for object/part"
|
||
|
||
msgid "Camera view - Default"
|
||
msgstr "Camera view - Default"
|
||
|
||
msgid "Camera view - Top"
|
||
msgstr "Camera view - Top"
|
||
|
||
msgid "Camera view - Bottom"
|
||
msgstr "Camera view - Bottom"
|
||
|
||
msgid "Camera view - Front"
|
||
msgstr "Camera view - Front"
|
||
|
||
msgid "Camera view - Behind"
|
||
msgstr "Camera view - Behind"
|
||
|
||
msgid "Camera Angle - Left side"
|
||
msgstr "Camera Angle - Left side"
|
||
|
||
msgid "Camera Angle - Right side"
|
||
msgstr "Camera Angle - Right side"
|
||
|
||
msgid "Select all objects"
|
||
msgstr "Select all objects"
|
||
|
||
msgid "Gizmo move"
|
||
msgstr "Gizmo move"
|
||
|
||
msgid "Gizmo scale"
|
||
msgstr "Gizmo scale"
|
||
|
||
msgid "Gizmo rotate"
|
||
msgstr "Gizmo rotate"
|
||
|
||
msgid "Gizmo cut"
|
||
msgstr "Gizmo cut"
|
||
|
||
msgid "Gizmo Place face on bed"
|
||
msgstr "Gizmo Place face on bed"
|
||
|
||
msgid "Gizmo SLA support points"
|
||
msgstr "Gizmo SLA support points"
|
||
|
||
msgid "Gizmo FDM paint-on seam"
|
||
msgstr "Gizmo FDM paint-on seam"
|
||
|
||
msgid "Plater"
|
||
msgstr "Plater"
|
||
|
||
msgid "Move: press to snap by 1mm"
|
||
msgstr "Move: press to snap by 1mm"
|
||
|
||
msgid "⌘+Mouse wheel"
|
||
msgstr "⌘+Mouse wheel"
|
||
|
||
msgid "Support/Color Painting: adjust pen radius"
|
||
msgstr "Support/Color Painting: adjust pen radius"
|
||
|
||
msgid "⌥+Mouse wheel"
|
||
msgstr "⌥+Mouse wheel"
|
||
|
||
msgid "Support/Color Painting: adjust section position"
|
||
msgstr "Support/Color Painting: adjust section position"
|
||
|
||
msgid "Ctrl+Mouse wheel"
|
||
msgstr "Ctrl+Mouse wheel"
|
||
|
||
msgid "Alt+Mouse wheel"
|
||
msgstr "Alt+Mouse wheel"
|
||
|
||
msgid "Gizmo"
|
||
msgstr "Gizmo"
|
||
|
||
msgid "Set extruder number for the objects and parts"
|
||
msgstr "Set extruder number for the objects and parts"
|
||
|
||
msgid "Delete objects, parts, modifiers "
|
||
msgstr "Delete objects, parts, modifiers"
|
||
|
||
msgid "Space"
|
||
msgstr "Space"
|
||
|
||
msgid "Select the object/part and press space to change the name"
|
||
msgstr "Select the object/part and press space to change the name"
|
||
|
||
msgid "Mouse click"
|
||
msgstr "Mouse click"
|
||
|
||
msgid "Select the object/part and mouse click to change the name"
|
||
msgstr "Select the object/part and mouse click to change the name"
|
||
|
||
msgid "Objects List"
|
||
msgstr "Objects List"
|
||
|
||
msgid "Vertical slider - Move active thumb Up"
|
||
msgstr "Vertical slider - Move active thumb Up"
|
||
|
||
msgid "Vertical slider - Move active thumb Down"
|
||
msgstr "Vertical slider - Move active thumb Down"
|
||
|
||
msgid "Horizontal slider - Move active thumb Left"
|
||
msgstr "Horizontal slider - Move active thumb Left"
|
||
|
||
msgid "Horizontal slider - Move active thumb Right"
|
||
msgstr "Horizontal slider - Move active thumb Right"
|
||
|
||
msgid "On/Off one layer mode of the vertical slider"
|
||
msgstr "On/Off one layer mode of the vertical slider"
|
||
|
||
msgid "Move slider 5x faster"
|
||
msgstr "Move slider 5x faster"
|
||
|
||
msgid "Shift+Mouse wheel"
|
||
msgstr "Shift+Mouse wheel"
|
||
|
||
msgid "Release Note"
|
||
msgstr "Release Note"
|
||
|
||
#, c-format, boost-format
|
||
msgid "version %s update information :"
|
||
msgstr "version %s update information :"
|
||
|
||
msgid "Network plug-in update"
|
||
msgstr "Network plug-in update"
|
||
|
||
msgid ""
|
||
"Click OK to update the Network plug-in when QIDI Studio launches next time."
|
||
msgstr ""
|
||
"Click OK to update the Network plug-in when QIDI Studio launches next time."
|
||
|
||
#, c-format, boost-format
|
||
msgid "A new Network plug-in(%s) available, Do you want to install it?"
|
||
msgstr "A new Network plug-in(%s) available, Do you want to install it?"
|
||
|
||
msgid "New version of QIDI Studio"
|
||
msgstr "New version of QIDI Studio"
|
||
|
||
msgid "Skip this Version"
|
||
msgstr "Skip this Version"
|
||
|
||
msgid "Done"
|
||
msgstr "Done"
|
||
|
||
msgid "resume"
|
||
msgstr "resume"
|
||
|
||
msgid "Resume Printing"
|
||
msgstr "Resume Printing"
|
||
|
||
msgid "Resume Printing(defects acceptable)"
|
||
msgstr "Resume Printing (defects acceptable)"
|
||
|
||
msgid "Resume Printing(problem solved)"
|
||
msgstr "Resume Printing (problem solved)"
|
||
|
||
msgid "Stop Printing"
|
||
msgstr "Stop Printing"
|
||
|
||
msgid "Check Assistant"
|
||
msgstr "Check Assistant"
|
||
|
||
msgid "Filament Extruded, Continue"
|
||
msgstr "Filament Extruded, Continue"
|
||
|
||
msgid "Not Extruded Yet, Retry"
|
||
msgstr "Not Extruded Yet, Retry"
|
||
|
||
msgid "Finished, Continue"
|
||
msgstr "Finished, Continue"
|
||
|
||
msgid "Load Filament"
|
||
msgstr "Load Filament"
|
||
|
||
msgid "Filament Loaded, Resume"
|
||
msgstr "Filament Loaded, Resume"
|
||
|
||
msgid "View Liveview"
|
||
msgstr "View Liveview"
|
||
|
||
msgid "Confirm and Update Nozzle"
|
||
msgstr "Confirm and Update Nozzle"
|
||
|
||
msgid "LAN Connection Failed (Sending print file)"
|
||
msgstr "LAN Connection Failed (Sending print file)"
|
||
|
||
msgid ""
|
||
"Step 1, please confirm QIDI Studio and your printer are in the same LAN."
|
||
msgstr ""
|
||
"Step 1, please confirm QIDI Studio and your printer are in the same LAN."
|
||
|
||
msgid ""
|
||
"Step 2, if the IP and Access Code below are different from the actual values "
|
||
"on your printer, please correct them."
|
||
msgstr ""
|
||
"Step 2, if the IP and Access Code below are different from the actual values "
|
||
"on your printer, please correct them."
|
||
|
||
msgid "Access Code"
|
||
msgstr "Access Code"
|
||
|
||
msgid "Where to find your printer's IP and Access Code?"
|
||
msgstr "Where to find your printer's IP and Access Code?"
|
||
|
||
msgid "Step 3: Ping the IP address to check for packet loss and latency."
|
||
msgstr "Step 3: Ping the IP address to check for packet loss and latency."
|
||
|
||
msgid "Test"
|
||
msgstr "Test"
|
||
|
||
msgid "IP and Access Code Verified! You may close the window"
|
||
msgstr "IP and Access Code Verified! You may close the window"
|
||
|
||
msgid "Connection failed, please double check IP and Access Code"
|
||
msgstr "Connection failed, please double check IP and Access Code"
|
||
|
||
msgid ""
|
||
"Connection failed! If your IP and Access Code is correct, \n"
|
||
"please move to step 3 for troubleshooting network issues"
|
||
msgstr ""
|
||
"Connection failed! If your IP and Access Code is correct, \n"
|
||
"please move to step 3 for troubleshooting network issues"
|
||
|
||
msgid "Model:"
|
||
msgstr "Model:"
|
||
|
||
msgid "Serial:"
|
||
msgstr "Serial:"
|
||
|
||
msgid "Version:"
|
||
msgstr "Version:"
|
||
|
||
msgid "Update firmware"
|
||
msgstr "Update firmware"
|
||
|
||
msgid "Printing"
|
||
msgstr "Printing"
|
||
|
||
msgid "Idle"
|
||
msgstr "Idle"
|
||
|
||
msgid "Beta version"
|
||
msgstr "Beta version"
|
||
|
||
msgid "Latest version"
|
||
msgstr "Latest version"
|
||
|
||
msgid "Updating"
|
||
msgstr "Updating"
|
||
|
||
msgid "Updating failed"
|
||
msgstr "Updating failed"
|
||
|
||
msgid "Updating successful"
|
||
msgstr "Updating successful"
|
||
|
||
msgid ""
|
||
"Are you sure you want to update? This will take about 10 minutes. Do not "
|
||
"turn off the power while the printer is updating."
|
||
msgstr ""
|
||
"Are you sure you want to update? This will take about 10 minutes. Do not "
|
||
"turn off the power while the printer is updating."
|
||
|
||
msgid ""
|
||
"An important update was detected and needs to be run before printing can "
|
||
"continue. Do you want to update now? You can also update later from 'Upgrade "
|
||
"firmware'."
|
||
msgstr ""
|
||
"An important update was detected and needs to be run before printing can "
|
||
"continue. Do you want to update now? You can also update later from 'Upgrade "
|
||
"firmware'."
|
||
|
||
msgid ""
|
||
"The firmware version is abnormal. Repairing and updating are required before "
|
||
"printing. Do you want to update now? You can also update later on printer or "
|
||
"update next time starting the studio."
|
||
msgstr ""
|
||
"The firmware version is abnormal. Repairing and updating are required before "
|
||
"printing. Do you want to update now? You can also update later on printer or "
|
||
"update next time starting the studio."
|
||
|
||
msgid "Extension Board"
|
||
msgstr "Extension Board"
|
||
|
||
msgid "Saving objects into the 3mf failed."
|
||
msgstr "Saving objects into the 3mf failed."
|
||
|
||
msgid "Only Windows 10 is supported."
|
||
msgstr "Only Windows 10 is supported."
|
||
|
||
msgid "Failed to initialize the WinRT library."
|
||
msgstr "Failed to initialize the WinRT library."
|
||
|
||
msgid "Exporting objects"
|
||
msgstr "Exporting objects"
|
||
|
||
msgid "Failed loading objects."
|
||
msgstr "Failed loading objects."
|
||
|
||
msgid "Repairing object by Windows service"
|
||
msgstr "Repairing object by Windows service"
|
||
|
||
msgid "Repair failed."
|
||
msgstr "Repair failed."
|
||
|
||
msgid "Loading repaired objects"
|
||
msgstr "Loading repaired objects"
|
||
|
||
msgid "Exporting 3mf file failed"
|
||
msgstr "Exporting 3mf file failed"
|
||
|
||
msgid "Import 3mf file failed"
|
||
msgstr "Import 3mf file failed"
|
||
|
||
msgid "Repaired 3mf file does not contain any object"
|
||
msgstr "Repaired 3mf file does not contain any object"
|
||
|
||
msgid "Repaired 3mf file contains more than one object"
|
||
msgstr "Repaired 3mf file contains more than one object"
|
||
|
||
msgid "Repaired 3mf file does not contain any volume"
|
||
msgstr "Repaired 3mf file does not contain any volume"
|
||
|
||
msgid "Repaired 3mf file contains more than one volume"
|
||
msgstr "Repaired 3mf file contains more than one volume"
|
||
|
||
msgid "Repair finished"
|
||
msgstr "Repair finished"
|
||
|
||
msgid "Repair canceled"
|
||
msgstr "Repair canceled"
|
||
|
||
#, boost-format
|
||
msgid "Copying of file %1% to %2% failed: %3%"
|
||
msgstr "Copying of file %1% to %2% failed: %3%"
|
||
|
||
#, boost-format
|
||
msgid "Copying directory %1% to %2% failed: %3%"
|
||
msgstr "Copying directory %1% to %2% failed: %3%"
|
||
|
||
msgid "Need to check the unsaved changes before configuration updates."
|
||
msgstr "Need to check the unsaved changes before configuration updates."
|
||
|
||
msgid "Configuration package updated to "
|
||
msgstr "Configuration package updated to "
|
||
|
||
msgid "Open G-code file:"
|
||
msgstr "Open G-code file:"
|
||
|
||
msgid ""
|
||
"The following object(s) have empty initial layer and can't be printed. "
|
||
"Please cut the bottom or enable supports."
|
||
msgstr ""
|
||
"The following object(s) have empty initial layer and can't be printed. "
|
||
"Please cut the bottom or enable supports."
|
||
|
||
#, boost-format
|
||
msgid "Object can't be printed for empty layer between %1% and %2%."
|
||
msgstr "Object can't be printed for empty layer between %1% and %2%."
|
||
|
||
#, boost-format
|
||
msgid "Object: %1%"
|
||
msgstr "Object: %1%"
|
||
|
||
msgid ""
|
||
"Maybe parts of the object at these height are too thin, or the object has "
|
||
"faulty mesh"
|
||
msgstr ""
|
||
"Maybe parts of the object at these height are too thin, or the object has "
|
||
"faulty mesh"
|
||
|
||
msgid "No object can be printed. Maybe too small"
|
||
msgstr "No object can be printed. Maybe too small"
|
||
|
||
msgid ""
|
||
"Failed to generate gcode for invalid custom G-code.\n"
|
||
"\n"
|
||
msgstr ""
|
||
"Failed to generate G-code for invalid custom G-code.\n"
|
||
"\n"
|
||
|
||
msgid "Please check the custom G-code or use the default custom G-code."
|
||
msgstr "Please check the custom G-code or use the default custom G-code."
|
||
|
||
#, boost-format
|
||
msgid "Generating G-code: layer %1%"
|
||
msgstr "Generating G-code: layer %1%"
|
||
|
||
msgid "Inner wall"
|
||
msgstr "Inner wall"
|
||
|
||
msgid "Outer wall"
|
||
msgstr "Outer wall"
|
||
|
||
msgid "Overhang wall"
|
||
msgstr "Overhang wall"
|
||
|
||
msgid "Internal solid infill"
|
||
msgstr "Internal solid infill"
|
||
|
||
msgid "Top surface"
|
||
msgstr "Top surface"
|
||
|
||
msgid "Bottom surface"
|
||
msgstr "Bottom surface"
|
||
|
||
msgid "Bridge"
|
||
msgstr "Bridge"
|
||
|
||
msgid "Gap infill"
|
||
msgstr "Gap infill"
|
||
|
||
msgid "Support interface"
|
||
msgstr "Support interface"
|
||
|
||
msgid "Support transition"
|
||
msgstr "Support transition"
|
||
|
||
msgid "Multiple"
|
||
msgstr "Multiple"
|
||
|
||
#, boost-format
|
||
msgid "Failed to calculate line width of %1%. Can not get value of \"%2%\" "
|
||
msgstr "Failed to calculate line width of %1%. Can not get value of \"%2%\" "
|
||
|
||
msgid "undefined error"
|
||
msgstr "undefined error"
|
||
|
||
msgid "too many files"
|
||
msgstr "too many files"
|
||
|
||
msgid "file too large"
|
||
msgstr "File too large"
|
||
|
||
msgid "unsupported method"
|
||
msgstr "unsupported method"
|
||
|
||
msgid "unsupported encryption"
|
||
msgstr "unsupported encryption"
|
||
|
||
msgid "unsupported feature"
|
||
msgstr "unsupported feature"
|
||
|
||
msgid "failed finding central directory"
|
||
msgstr "failed finding central directory"
|
||
|
||
msgid "not a ZIP archive"
|
||
msgstr "not a ZIP archive"
|
||
|
||
msgid "invalid header or corrupted"
|
||
msgstr "invalid header or corrupted"
|
||
|
||
msgid "unsupported multidisk"
|
||
msgstr "unsupported multidisk"
|
||
|
||
msgid "decompression failed"
|
||
msgstr "decompression failed"
|
||
|
||
msgid "compression failed"
|
||
msgstr "compression failed"
|
||
|
||
msgid "unexpected decompressed size"
|
||
msgstr "unexpected decompressed size"
|
||
|
||
msgid "CRC check failed"
|
||
msgstr "CRC check failed"
|
||
|
||
msgid "unsupported central directory size"
|
||
msgstr "unsupported central directory size"
|
||
|
||
msgid "allocation failed"
|
||
msgstr "allocation failed"
|
||
|
||
msgid "file open failed"
|
||
msgstr "file open failed"
|
||
|
||
msgid "file create failed"
|
||
msgstr "file create failed"
|
||
|
||
msgid "file write failed"
|
||
msgstr "file write failed"
|
||
|
||
msgid "file read failed"
|
||
msgstr "file read failed"
|
||
|
||
msgid "file close failed"
|
||
msgstr "file close failed"
|
||
|
||
msgid "file seek failed"
|
||
msgstr "file seek failed"
|
||
|
||
msgid "file stat failed"
|
||
msgstr "file stat failed"
|
||
|
||
msgid "invalid parameter"
|
||
msgstr "invalid parameter"
|
||
|
||
msgid "invalid filename"
|
||
msgstr "invalid filename"
|
||
|
||
msgid "buffer too small"
|
||
msgstr "Buffer too small"
|
||
|
||
msgid "internal error"
|
||
msgstr "internal error"
|
||
|
||
msgid "file not found"
|
||
msgstr "file not found"
|
||
|
||
msgid "archive too large"
|
||
msgstr "Archive too large"
|
||
|
||
msgid "validation failed"
|
||
msgstr "validation failed"
|
||
|
||
msgid "write callback failed"
|
||
msgstr "write callback failed"
|
||
|
||
#, boost-format
|
||
msgid ""
|
||
"%1% is too close to exclusion area, there may be collisions when printing."
|
||
msgstr ""
|
||
"%1% is too close to exclusion area, there may be collisions when printing."
|
||
|
||
#, boost-format
|
||
msgid "%1% is too close to others, and collisions may be caused."
|
||
msgstr "%1% is too close to others, and collisions may be caused."
|
||
|
||
#, boost-format
|
||
msgid "%1% is too tall, and collisions will be caused."
|
||
msgstr "%1% is too tall, and collisions will be caused."
|
||
|
||
msgid " is too close to exclusion area, there may be collisions when printing."
|
||
msgstr ""
|
||
" is too close to exclusion area, there may be collisions when printing."
|
||
|
||
msgid "Prime Tower"
|
||
msgstr "Prime Tower"
|
||
|
||
msgid " is too close to others, and collisions may be caused.\n"
|
||
msgstr " is too close to others, and collisions may be caused.\n"
|
||
|
||
msgid " is too close to exclusion area, and collisions will be caused.\n"
|
||
msgstr " is too close to an exclusion area, and collisions will be caused.\n"
|
||
|
||
msgid ""
|
||
"Can not print multiple filaments which have large difference of temperature "
|
||
"together. Otherwise, the extruder and nozzle may be blocked or damaged "
|
||
"during printing"
|
||
msgstr ""
|
||
"Unable to print multiple filaments which have large temperature differences "
|
||
"together. Otherwise, the extruder and nozzle may be blocked or damaged "
|
||
"during printing."
|
||
|
||
msgid "No extrusions under current settings."
|
||
msgstr "No extrusions under current settings."
|
||
|
||
msgid ""
|
||
"Smooth mode of timelapse is not supported when \"by object\" sequence is "
|
||
"enabled."
|
||
msgstr ""
|
||
"Smooth mode of timelapse is not supported when \"by object\" sequence is "
|
||
"enabled."
|
||
|
||
msgid ""
|
||
"Please select \"By object\" print sequence to print multiple objects in "
|
||
"spiral vase mode."
|
||
msgstr ""
|
||
"Please select \"By object\" print sequence to print multiple objects in "
|
||
"spiral vase mode."
|
||
|
||
msgid ""
|
||
"The spiral vase mode does not work when an object contains more than one "
|
||
"materials."
|
||
msgstr ""
|
||
"The spiral vase mode does not work when an object contains more than one "
|
||
"materials."
|
||
|
||
msgid "Variable layer height is not supported with Organic supports."
|
||
msgstr "Variable layer height is not supported with Organic supports."
|
||
|
||
msgid ""
|
||
"Different nozzle diameters and different filament diameters is not allowed "
|
||
"when prime tower is enabled."
|
||
msgstr ""
|
||
"Different nozzle diameters and different filament diameters is not allowed "
|
||
"when prime tower is enabled."
|
||
|
||
msgid ""
|
||
"The Wipe Tower is currently only supported with the relative extruder "
|
||
"addressing (use_relative_e_distances=1)."
|
||
msgstr ""
|
||
"The Wipe Tower is currently only supported with the relative extruder "
|
||
"addressing (use_relative_e_distances=1)."
|
||
|
||
msgid ""
|
||
"Ooze prevention is currently not supported with the prime tower enabled."
|
||
msgstr ""
|
||
"Ooze prevention is currently not supported with the prime tower enabled."
|
||
|
||
msgid ""
|
||
"The prime tower is currently only supported for the Marlin, RepRap/Sprinter, "
|
||
"RepRapFirmware and Repetier G-code flavors."
|
||
msgstr ""
|
||
"The prime tower is currently only supported for the Marlin, RepRap/Sprinter, "
|
||
"RepRapFirmware and Repetier G-code flavors."
|
||
|
||
msgid "The prime tower is not supported in \"By object\" print."
|
||
msgstr "The prime tower is not supported in \"By object\" print."
|
||
|
||
msgid ""
|
||
"The prime tower is not supported when adaptive layer height is on. It "
|
||
"requires that all objects have the same layer height."
|
||
msgstr ""
|
||
"The prime tower is not supported when adaptive layer height is on. It "
|
||
"requires that all objects have the same layer height."
|
||
|
||
msgid "The prime tower requires \"support gap\" to be multiple of layer height"
|
||
msgstr ""
|
||
"The prime tower requires \"support gap\" to be multiple of layer height"
|
||
|
||
msgid "The prime tower requires that all objects have the same layer heights"
|
||
msgstr "The prime tower requires that all objects have the same layer heights"
|
||
|
||
msgid ""
|
||
"The prime tower requires that all objects are printed over the same number "
|
||
"of raft layers"
|
||
msgstr ""
|
||
"The prime tower requires that all objects are printed over the same number "
|
||
"of raft layers"
|
||
|
||
msgid ""
|
||
"The prime tower requires that all objects are sliced with the same layer "
|
||
"heights."
|
||
msgstr ""
|
||
"The prime tower requires that all objects are sliced with the same layer "
|
||
"heights."
|
||
|
||
msgid ""
|
||
"The prime tower is only supported if all objects have the same variable "
|
||
"layer height"
|
||
msgstr ""
|
||
"The prime tower is only supported if all objects have the same variable "
|
||
"layer height"
|
||
|
||
msgid "Too small line width"
|
||
msgstr "Line width too small"
|
||
|
||
msgid "Too large line width"
|
||
msgstr "Line width too large"
|
||
|
||
msgid ""
|
||
"The prime tower requires that support has the same layer height as object."
|
||
msgstr ""
|
||
"The prime tower requires that supports have the same layer height as objects."
|
||
|
||
msgid ""
|
||
"Support enforcers are used but support is not enabled. Please enable support."
|
||
msgstr ""
|
||
"Support enforcers are used but support is not enabled. Please enable support."
|
||
|
||
msgid "Layer height cannot exceed nozzle diameter"
|
||
msgstr "Layer height cannot exceed nozzle diameter"
|
||
|
||
#, c-format, boost-format
|
||
msgid "Plate %d: %s does not support filament %s"
|
||
msgstr "Plate %d: %s does not support filament %s"
|
||
|
||
msgid "Generating skirt & brim"
|
||
msgstr "Generating skirt & brim"
|
||
|
||
msgid "Exporting G-code"
|
||
msgstr "Exporting G-code"
|
||
|
||
msgid "Generating G-code"
|
||
msgstr "Generating G-code"
|
||
|
||
msgid "Failed processing of the filename_format template."
|
||
msgstr "Failed processing of the filename_format template."
|
||
|
||
msgid "Printable area"
|
||
msgstr "Printable area"
|
||
|
||
msgid "Bed exclude area"
|
||
msgstr "Bed exclude area"
|
||
|
||
msgid ""
|
||
"Unprintable area in XY plane. For example, X1 Series printers use the front "
|
||
"left corner to cut filament during filament change. The area is expressed as "
|
||
"polygon by points in following format: \"XxY, XxY, ...\""
|
||
msgstr ""
|
||
"Unprintable area in XY plane. For example, X1 Series printers use the front "
|
||
"left corner to cut filament during filament change. The area is expressed as "
|
||
"polygon by points in following format: \"XxY, XxY, ...\""
|
||
|
||
msgid "Bed custom texture"
|
||
msgstr "Bed custom texture"
|
||
|
||
msgid "Bed custom model"
|
||
msgstr "Bed custom model"
|
||
|
||
msgid "Elephant foot compensation"
|
||
msgstr "Elephant foot compensation"
|
||
|
||
msgid ""
|
||
"Shrink the initial layer on build plate to compensate for elephant foot "
|
||
"effect"
|
||
msgstr ""
|
||
"Shrink the initial layer on build plate to compensate for elephant foot "
|
||
"effect"
|
||
|
||
msgid ""
|
||
"Slicing height for each layer. Smaller layer height means more accurate and "
|
||
"more printing time"
|
||
msgstr ""
|
||
"Slicing height for each layer. Smaller layer height means more accurate and "
|
||
"more printing time"
|
||
|
||
msgid "Printable height"
|
||
msgstr "Printable height"
|
||
|
||
msgid "Maximum printable height which is limited by mechanism of printer"
|
||
msgstr "Maximum printable height which is limited by mechanism of printer"
|
||
|
||
msgid "Printer preset names"
|
||
msgstr "Printer preset names"
|
||
|
||
msgid "Hostname, IP or URL"
|
||
msgstr "Hostname, IP or URL"
|
||
|
||
msgid ""
|
||
"Slic3r can upload G-code files to a printer host. This field should contain "
|
||
"the hostname, IP address or URL of the printer host instance. Print host "
|
||
"behind HAProxy with basic auth enabled can be accessed by putting the user "
|
||
"name and password into the URL in the following format: https://username:"
|
||
"password@your-octopi-address/"
|
||
msgstr ""
|
||
"Slic3r can upload G-code files to a printer host. This field should contain "
|
||
"the hostname, IP address or URL of the printer host instance. Print host "
|
||
"behind HAProxy with basic auth enabled can be accessed by putting the user "
|
||
"name and password into the URL in the following format: https://username:"
|
||
"password@your-octopi-address/"
|
||
|
||
msgid "Device UI"
|
||
msgstr "Device UI"
|
||
|
||
msgid ""
|
||
"Specify the URL of your device user interface if it's not same as print_host"
|
||
msgstr ""
|
||
"Specify the URL of your device user interface if it's not same as print_host"
|
||
|
||
msgid "API Key / Password"
|
||
msgstr "API Key / Password"
|
||
|
||
msgid ""
|
||
"Slic3r can upload G-code files to a printer host. This field should contain "
|
||
"the API Key or the password required for authentication."
|
||
msgstr ""
|
||
"Slic3r can upload G-code files to a printer host. This field should contain "
|
||
"the API Key or the password required for authentication."
|
||
|
||
msgid "Name of the printer"
|
||
msgstr "Name of the printer"
|
||
|
||
msgid "HTTPS CA File"
|
||
msgstr "HTTPS CA File"
|
||
|
||
msgid ""
|
||
"Custom CA certificate file can be specified for HTTPS OctoPrint connections, "
|
||
"in crt/pem format. If left blank, the default OS CA certificate repository "
|
||
"is used."
|
||
msgstr ""
|
||
"Custom CA certificate file can be specified for HTTPS OctoPrint connections, "
|
||
"in crt/pem format. If left blank, the default OS CA certificate repository "
|
||
"is used."
|
||
|
||
msgid "User"
|
||
msgstr "User"
|
||
|
||
msgid "Password"
|
||
msgstr "Password"
|
||
|
||
msgid "Ignore HTTPS certificate revocation checks"
|
||
msgstr "Ignore HTTPS certificate revocation checks"
|
||
|
||
msgid ""
|
||
"Ignore HTTPS certificate revocation checks in case of missing or offline "
|
||
"distribution points. One may want to enable this option for self signed "
|
||
"certificates if connection fails."
|
||
msgstr ""
|
||
"Ignore HTTPS certificate revocation checks in case of missing or offline "
|
||
"distribution points. One may want to enable this option for self signed "
|
||
"certificates if connection fails."
|
||
|
||
msgid "Names of presets related to the physical printer"
|
||
msgstr "Names of presets related to the physical printer"
|
||
|
||
msgid "Authorization Type"
|
||
msgstr "Authorization Type"
|
||
|
||
msgid "API key"
|
||
msgstr "API key"
|
||
|
||
msgid "HTTP digest"
|
||
msgstr "HTTP digest"
|
||
|
||
msgid "Avoid crossing wall"
|
||
msgstr "Avoid crossing wall"
|
||
|
||
msgid "Detour and avoid traveling across wall which may cause blob on surface"
|
||
msgstr ""
|
||
"Detour and avoid traveling across walls to avoid the possibility of creating "
|
||
"blobs on surfaces"
|
||
|
||
msgid "Avoid crossing wall - Max detour length"
|
||
msgstr "Avoid crossing wall - Max detour length"
|
||
|
||
msgid ""
|
||
"Maximum detour distance for avoiding crossing wall. Don't detour if the "
|
||
"detour distance is larger than this value. Detour length could be specified "
|
||
"either as an absolute value or as percentage (for example 50%) of a direct "
|
||
"travel path. Zero to disable"
|
||
msgstr ""
|
||
"Maximum detour distance for avoiding crossing wall. Don't detour if the "
|
||
"detour distance is larger than this value. Detour length could be specified "
|
||
"either as an absolute value or as percentage (for example 50%) of a direct "
|
||
"travel path. 0 disables this feature."
|
||
|
||
msgid "mm or %"
|
||
msgstr "mm or %"
|
||
|
||
msgid "Other layers"
|
||
msgstr "Other layers"
|
||
|
||
msgid ""
|
||
"Bed temperature for layers except the initial one. Value 0 means the "
|
||
"filament does not support to print on the Cool Plate"
|
||
msgstr ""
|
||
"This is the bed temperature for layers except for the first one. A value of "
|
||
"0 means the filament does not support printing on the Cool Plate."
|
||
|
||
msgid ""
|
||
"Bed temperature for layers except the initial one. Value 0 means the "
|
||
"filament does not support to print on the Engineering Plate"
|
||
msgstr ""
|
||
"This is the bed temperature for layers except for the first one. A value of "
|
||
"0 means the filament does not support printing on the Engineering Plate."
|
||
|
||
msgid ""
|
||
"Bed temperature for layers except the initial one. Value 0 means the "
|
||
"filament does not support to print on the High Temp Plate"
|
||
msgstr ""
|
||
"This is the bed temperature for layers except for the first one. A value of "
|
||
"0 means the filament does not support printing on the High Temp Plate."
|
||
|
||
msgid ""
|
||
"Bed temperature for layers except the initial one. Value 0 means the "
|
||
"filament does not support to print on the Textured PEI Plate"
|
||
msgstr ""
|
||
"Bed temperature for layers except the initial one. Value 0 means the "
|
||
"filament does not support to print on the Textured PEI Plate"
|
||
|
||
msgid "Initial layer"
|
||
msgstr "Initial layer"
|
||
|
||
msgid "Initial layer bed temperature"
|
||
msgstr "Initial layer bed temperature"
|
||
|
||
msgid ""
|
||
"Bed temperature of the initial layer. Value 0 means the filament does not "
|
||
"support to print on the Cool Plate"
|
||
msgstr ""
|
||
"This is the bed temperature of the first layer. A value of 0 means the "
|
||
"filament does not support printing on the Cool Plate."
|
||
|
||
msgid ""
|
||
"Bed temperature of the initial layer. Value 0 means the filament does not "
|
||
"support to print on the Engineering Plate"
|
||
msgstr ""
|
||
"This is the bed temperature of the first layer. A value of 0 means the "
|
||
"filament does not support printing on the Engineering Plate."
|
||
|
||
msgid ""
|
||
"Bed temperature of the initial layer. Value 0 means the filament does not "
|
||
"support to print on the High Temp Plate"
|
||
msgstr ""
|
||
"This is the bed temperature of the first layer. A value of 0 means the "
|
||
"filament does not support printing on the High Temp Plate."
|
||
|
||
msgid ""
|
||
"Bed temperature of the initial layer. Value 0 means the filament does not "
|
||
"support to print on the Textured PEI Plate"
|
||
msgstr ""
|
||
"Bed temperature of the initial layer. Value 0 means the filament does not "
|
||
"support to print on the Textured PEI Plate"
|
||
|
||
msgid "Bed types supported by the printer"
|
||
msgstr "Plate types supported by the printer"
|
||
|
||
msgid "First layer print sequence"
|
||
msgstr "First layer print sequence"
|
||
|
||
msgid "Other layers print sequence"
|
||
msgstr "Other layers print sequence"
|
||
|
||
msgid "The number of other layers print sequence"
|
||
msgstr "The number of other layers print sequence"
|
||
|
||
msgid "Other layers filament sequence"
|
||
msgstr "Other layers filament sequence"
|
||
|
||
msgid "This G-code is inserted at every layer change before lifting z"
|
||
msgstr "This G-code is inserted at every layer change before lifting z"
|
||
|
||
msgid "Bottom shell layers"
|
||
msgstr "Bottom shell layers"
|
||
|
||
msgid ""
|
||
"This is the number of solid layers of bottom shell, including the bottom "
|
||
"surface layer. When the thickness calculated by this value is thinner than "
|
||
"bottom shell thickness, the bottom shell layers will be increased"
|
||
msgstr ""
|
||
"This is the number of solid layers of bottom shell, including the bottom "
|
||
"surface layer. When the thickness calculated by this value is thinner than "
|
||
"bottom shell thickness, the bottom shell layers will be increased"
|
||
|
||
msgid "Bottom shell thickness"
|
||
msgstr "Bottom shell thickness"
|
||
|
||
msgid ""
|
||
"The number of bottom solid layers is increased when slicing if the thickness "
|
||
"calculated by bottom shells layers is thinner than this value. This can "
|
||
"avoid having too thin shell when layer height is small. 0 means that this "
|
||
"setting is disabled and thickness of bottom shell is absolutely determained "
|
||
"by bottom shell layers"
|
||
msgstr ""
|
||
"The number of bottom solid layers is increased when slicing if the thickness "
|
||
"calculated by bottom shells layers is thinner than this value. This can "
|
||
"avoid having an overly thin shell when layer height is small. 0 means that "
|
||
"this setting is disabled and thickness of bottom shell is determined by "
|
||
"bottom shell layers."
|
||
|
||
msgid "Force cooling for overhang and bridge"
|
||
msgstr "Force cooling for overhangs and bridges"
|
||
|
||
msgid ""
|
||
"Enable this option to optimize part cooling fan speed for overhang and "
|
||
"bridge to get better cooling"
|
||
msgstr ""
|
||
"Enable this option to optimize the part cooling fan speed for overhangs and "
|
||
"bridges to get better cooling"
|
||
|
||
msgid "Fan speed for overhang"
|
||
msgstr "Fan speed for overhangs"
|
||
|
||
msgid ""
|
||
"Force part cooling fan to be at this speed when printing bridge or overhang "
|
||
"wall which has large overhang degree. Forcing cooling for overhang and "
|
||
"bridge can get better quality for these part"
|
||
msgstr ""
|
||
"Force part cooling fan to be at this speed when printing bridges or overhang "
|
||
"walls which have a large overhang degree. Forcing cooling for overhangs and "
|
||
"bridges can improve quality for these parts."
|
||
|
||
msgid "Cooling overhang threshold"
|
||
msgstr "Cooling overhang threshold"
|
||
|
||
#, c-format
|
||
msgid ""
|
||
"Force cooling fan to be specific speed when overhang degree of printed part "
|
||
"exceeds this value. Expressed as percentage which indicides how much width "
|
||
"of the line without support from lower layer. 0% means forcing cooling for "
|
||
"all outer wall no matter how much overhang degree"
|
||
msgstr ""
|
||
"Force cooling fan to be specific speed when overhang degree of printed part "
|
||
"exceeds this value. Expressed as percentage which indicides how much width "
|
||
"of the line without support from lower layer. 0% means forcing cooling for "
|
||
"all outer wall no matter how much overhang degree"
|
||
|
||
msgid "Bridge direction"
|
||
msgstr "Bridge direction"
|
||
|
||
msgid ""
|
||
"Bridging angle override. If left to zero, the bridging angle will be "
|
||
"calculated automatically. Otherwise the provided angle will be used for "
|
||
"external bridges. Use 180°for zero angle."
|
||
msgstr ""
|
||
"Bridging angle override. If left to zero, the bridging angle will be "
|
||
"calculated automatically. Otherwise the provided angle will be used for "
|
||
"external bridges. Use 180°for zero angle."
|
||
|
||
msgid "Bridge flow"
|
||
msgstr "Bridge flow"
|
||
|
||
msgid ""
|
||
"Decrease this value slightly(for example 0.9) to reduce the amount of "
|
||
"material for bridge, to improve sag"
|
||
msgstr ""
|
||
"Decrease this value slightly(for example 0.9) to reduce the amount of "
|
||
"material for bridge, to improve sag"
|
||
|
||
msgid "Top surface flow ratio"
|
||
msgstr "Top surface flow ratio"
|
||
|
||
msgid ""
|
||
"This factor affects the amount of material for top solid infill. You can "
|
||
"decrease it slightly to have smooth surface finish"
|
||
msgstr ""
|
||
"This factor affects the amount of material for top solid infill. You can "
|
||
"decrease it slightly to have smooth surface finish"
|
||
|
||
msgid "Initial layer flow ratio"
|
||
msgstr "Initial layer flow ratio"
|
||
|
||
msgid "This factor affects the amount of material for the initial layer"
|
||
msgstr "This factor affects the amount of material for the initial layer"
|
||
|
||
msgid "Only one wall on top surfaces"
|
||
msgstr "Only one wall on top surfaces"
|
||
|
||
msgid ""
|
||
"Use only one wall on flat top surface, to give more space to the top infill "
|
||
"pattern. Could be applied on topmost surface or all top surface."
|
||
msgstr ""
|
||
"Use only one wall on flat top surface to give more space to the top infill "
|
||
"pattern. Can be applied on topmost surface or all top surfaces"
|
||
|
||
msgid "Not apply"
|
||
msgstr "Not applied"
|
||
|
||
msgid "Top surfaces"
|
||
msgstr "Top surfaces"
|
||
|
||
msgid "Topmost surface"
|
||
msgstr "Topmost surface"
|
||
|
||
msgid "Top area threshold"
|
||
msgstr "Top area threshold"
|
||
|
||
msgid ""
|
||
"This factor affects the acreage of top area. The small the number the big "
|
||
"the top area."
|
||
msgstr ""
|
||
"This factor affects the size of the top area. Smaller numbers mean a bigger "
|
||
"top area."
|
||
|
||
msgid "Only one wall on first layer"
|
||
msgstr "Only one wall on first layer"
|
||
|
||
msgid "Use only one wall on the first layer of model"
|
||
msgstr "Use only one wall on the first layer of model"
|
||
|
||
msgid "Slow down for overhang"
|
||
msgstr "Slow down for overhangs"
|
||
|
||
msgid "Enable this option to slow printing down for different overhang degree"
|
||
msgstr ""
|
||
"Enable this option to slow down when printing overhangs. The speeds for "
|
||
"different overhang percentages are set below."
|
||
|
||
msgid "mm/s"
|
||
msgstr "mm/s"
|
||
|
||
msgid "over 100% wall (not bridge)"
|
||
msgstr ""
|
||
|
||
#, c-format, boost-format
|
||
msgid ""
|
||
"Speed for line of wall which has degree of overhang over 100% line width, "
|
||
"but the wall is not a bridge wall."
|
||
msgstr ""
|
||
|
||
msgid "Speed of bridge and completely overhang wall"
|
||
msgstr "Speed of bridge and completely overhang wall"
|
||
|
||
msgid "Brim width"
|
||
msgstr "Brim width"
|
||
|
||
msgid "Distance from model to the outermost brim line"
|
||
msgstr "Distance from model to the outermost brim line"
|
||
|
||
msgid "Brim type"
|
||
msgstr "Brim type"
|
||
|
||
msgid ""
|
||
"This controls the generation of the brim at outer and/or inner side of "
|
||
"models. Auto means the brim width is analysed and calculated automatically."
|
||
msgstr ""
|
||
"This controls the generation of the brim at outer and/or inner side of "
|
||
"models. Auto means the brim width is analysed and calculated automatically."
|
||
|
||
msgid "Brim-object gap"
|
||
msgstr "Brim-object gap"
|
||
|
||
msgid ""
|
||
"A gap between innermost brim line and object can make brim be removed more "
|
||
"easily"
|
||
msgstr ""
|
||
"A gap between innermost brim line and object can make brim be removed more "
|
||
"easily"
|
||
|
||
msgid "Compatible machine"
|
||
msgstr "Compatible machine"
|
||
|
||
msgid "upward compatible machine"
|
||
msgstr "upward compatible machine"
|
||
|
||
msgid "Compatible machine condition"
|
||
msgstr "Compatible machine condition"
|
||
|
||
msgid "Compatible process profiles"
|
||
msgstr "Compatible process profiles"
|
||
|
||
msgid "Compatible process profiles condition"
|
||
msgstr "Compatible process profiles condition"
|
||
|
||
msgid "Print sequence, layer by layer or object by object"
|
||
msgstr "Print sequence, layer by layer or object by object"
|
||
|
||
msgid "By layer"
|
||
msgstr "By layer"
|
||
|
||
msgid "By object"
|
||
msgstr "By object"
|
||
|
||
msgid "Slow printing down for better layer cooling"
|
||
msgstr "Slow printing down for better layer cooling"
|
||
|
||
msgid ""
|
||
"Enable this option to slow printing speed down to make the final layer time "
|
||
"not shorter than the layer time threshold in \"Max fan speed threshold\", so "
|
||
"that layer can be cooled for a longer time. This can improve the cooling "
|
||
"quality for needle and small details"
|
||
msgstr ""
|
||
"Enable this option to slow printing speed down to make the final layer time "
|
||
"not shorter than the layer time threshold in \"Max fan speed threshold\" so "
|
||
"that the layer can be cooled for more time. This can improve the quality for "
|
||
"fine details"
|
||
|
||
msgid "Normal printing"
|
||
msgstr "Normal printing"
|
||
|
||
msgid ""
|
||
"The default acceleration of both normal printing and travel except initial "
|
||
"layer"
|
||
msgstr ""
|
||
"The default acceleration of both normal printing and travel except initial "
|
||
"layer"
|
||
|
||
msgid "Default filament profile"
|
||
msgstr "Default filament profile"
|
||
|
||
msgid "Default filament profile when switch to this machine profile"
|
||
msgstr "Default filament profile when switch to this machine profile"
|
||
|
||
msgid "Default process profile"
|
||
msgstr "Default process profile"
|
||
|
||
msgid "Default process profile when switch to this machine profile"
|
||
msgstr "Default process profile when switch to this machine profile"
|
||
|
||
msgid "Activate air filtration"
|
||
msgstr "Activate air filtration"
|
||
|
||
msgid "Activate for better air filtration"
|
||
msgstr "Activate for better air filtration"
|
||
|
||
msgid "Fan speed"
|
||
msgstr "Fan speed"
|
||
|
||
msgid ""
|
||
"Speed of exhaust fan during printing.This speed will overwrite the speed in "
|
||
"filament custom gcode"
|
||
msgstr ""
|
||
"Speed of exhaust fan during printing.This speed will override the speed in "
|
||
"filament custom g-code"
|
||
|
||
msgid "Speed of exhuast fan after printing completes"
|
||
msgstr "Speed of exhuast fan after printing completes"
|
||
|
||
msgid "No cooling for the first"
|
||
msgstr "No cooling for the first"
|
||
|
||
msgid ""
|
||
"Close all cooling fan for the first certain layers. Cooling fan of the first "
|
||
"layer used to be closed to get better build plate adhesion"
|
||
msgstr ""
|
||
"Turn off all cooling fans for the first few layers. This can be used to "
|
||
"improve bed adhesion."
|
||
|
||
msgid "layers"
|
||
msgstr "layers"
|
||
|
||
msgid "Don't support bridges"
|
||
msgstr "Don't support bridges"
|
||
|
||
msgid ""
|
||
"Don't support the whole bridge area which makes support very large. Bridge "
|
||
"usually can be printing directly without support if not very long"
|
||
msgstr ""
|
||
"Don't support the whole bridge area in order to use less support. Shorter "
|
||
"bridges can usually be printed directly without support."
|
||
|
||
msgid "Thick bridges"
|
||
msgstr "Thick bridges"
|
||
|
||
msgid ""
|
||
"If enabled, bridges are more reliable, can bridge longer distances, but may "
|
||
"look worse. If disabled, bridges look better but are reliable just for "
|
||
"shorter bridged distances."
|
||
msgstr ""
|
||
"If enabled, bridges are more reliable, can bridge longer distances, but may "
|
||
"look worse. If disabled, bridges look better but are reliable just for "
|
||
"shorter bridged distances."
|
||
|
||
msgid "Max bridge length"
|
||
msgstr "Max bridge length"
|
||
|
||
msgid ""
|
||
"Max length of bridges that don't need support. Set it to 0 if you want all "
|
||
"bridges to be supported, and set it to a very large value if you don't want "
|
||
"any bridges to be supported."
|
||
msgstr ""
|
||
"This is the maximum length of bridges that don't need support. Set it to 0 "
|
||
"if you want all bridges to be supported, and set it to a very large value if "
|
||
"you don't want any bridges to be supported."
|
||
|
||
msgid "End G-code"
|
||
msgstr "End G-code"
|
||
|
||
msgid "End G-code when finish the whole printing"
|
||
msgstr "End G-code when finish the whole printing"
|
||
|
||
msgid "Between Object Gcode"
|
||
msgstr "Between Object Gcode"
|
||
|
||
msgid ""
|
||
"Insert Gcode between objects. This parameter will only come into effect when "
|
||
"you print your models object by object"
|
||
msgstr ""
|
||
"Insert Gcode between objects. This parameter will only come into effect when "
|
||
"you print your models object by object"
|
||
|
||
msgid "End G-code when finish the printing of this filament"
|
||
msgstr "End G-code when finish the printing of this filament"
|
||
|
||
msgid "Ensure vertical shell thickness"
|
||
msgstr "Ensure vertical shell thickness"
|
||
|
||
msgid ""
|
||
"Add solid infill near sloping surfaces to guarantee the vertical shell "
|
||
"thickness (top+bottom solid layers)"
|
||
msgstr ""
|
||
"Add solid infill near sloping surfaces to guarantee the vertical shell "
|
||
"thickness (top+bottom solid layers)"
|
||
|
||
msgid "Internal bridge support thickness"
|
||
msgstr "Internal bridge support thickness"
|
||
|
||
msgid ""
|
||
"When sparse infill density is low, the internal solid infill or internal "
|
||
"bridge may have no archor at the end of line. This causes falling and bad "
|
||
"quality when printing internal solid infill. When enable this feature, loop "
|
||
"paths will be added to the sparse fill of the lower layers for specific "
|
||
"thickness, so that better archor can be provided for internal bridge. 0 "
|
||
"means disable this feature"
|
||
msgstr ""
|
||
"When sparse infill density is low, the internal solid infill or internal "
|
||
"bridge may have no anchor at the end of lines. This causes falling and "
|
||
"decreased quality when printing internal solid infill. When this feature is "
|
||
"enabled, loop paths will be added to the sparse fill of the lower layers to "
|
||
"attain a specific thickness, so that better anchoring can be provided for "
|
||
"internal bridges. 0 disables this feature."
|
||
|
||
msgid "Top surface pattern"
|
||
msgstr "Top surface pattern"
|
||
|
||
msgid "Line pattern of top surface infill"
|
||
msgstr "Line pattern of top surface infill"
|
||
|
||
msgid "Concentric"
|
||
msgstr "Concentric"
|
||
|
||
msgid "Rectilinear"
|
||
msgstr "Rectilinear"
|
||
|
||
msgid "Monotonic"
|
||
msgstr "Monotonic"
|
||
|
||
msgid "Monotonic line"
|
||
msgstr "Monotonic line"
|
||
|
||
msgid "Aligned Rectilinear"
|
||
msgstr "Aligned Rectilinear"
|
||
|
||
msgid "Hilbert Curve"
|
||
msgstr "Hilbert Curve"
|
||
|
||
msgid "Archimedean Chords"
|
||
msgstr "Archimedean Chords"
|
||
|
||
msgid "Octagram Spiral"
|
||
msgstr "Octagram Spiral"
|
||
|
||
msgid "Bottom surface pattern"
|
||
msgstr "Bottom surface pattern"
|
||
|
||
msgid "Line pattern of bottom surface infill, not bridge infill"
|
||
msgstr "Line pattern of bottom surface infill, not bridge infill"
|
||
|
||
msgid "Internal solid infill pattern"
|
||
msgstr "Internal solid infill pattern"
|
||
|
||
msgid ""
|
||
"Line pattern of internal solid infill. if the detect narrow internal solid "
|
||
"infill be enabled, the concentric pattern will be used for the small area."
|
||
msgstr ""
|
||
|
||
msgid "Line width of outer wall"
|
||
msgstr "Line width of outer wall"
|
||
|
||
msgid ""
|
||
"Speed of outer wall which is outermost and visible. It's used to be slower "
|
||
"than inner wall speed to get better quality."
|
||
msgstr ""
|
||
"This is the printing speed for the outer walls of parts. These are generally "
|
||
"printed slower than inner walls for higher quality."
|
||
|
||
msgid "Small perimeters"
|
||
msgstr "Small perimeters"
|
||
|
||
msgid ""
|
||
"This setting will affect the speed of perimeters having radius <= small "
|
||
"perimeter threshold(usually holes). If expressed as percentage (for example: "
|
||
"80%) it will be calculated onthe outer wall speed setting above. Set to zero "
|
||
"for auto."
|
||
msgstr ""
|
||
"This setting will affect the speed of perimeters having radius <= small "
|
||
"perimeter threshold(usually holes). If expressed as percentage (for example: "
|
||
"80%) it will be calculated onthe outer wall speed setting above. Set to zero "
|
||
"for auto."
|
||
|
||
msgid "mm/s or %"
|
||
msgstr "mm/s or %"
|
||
|
||
msgid "Small perimter threshold"
|
||
msgstr "Small perimter threshold"
|
||
|
||
msgid ""
|
||
"This sets the threshold for small perimeter length. Default threshold is 0mm"
|
||
msgstr ""
|
||
"This sets the threshold for small perimeter length. Default threshold is 0mm"
|
||
|
||
msgid "Order of walls"
|
||
msgstr "Order of walls"
|
||
|
||
msgid "Print sequence of inner wall and outer wall. "
|
||
msgstr "Print sequence of inner wall and outer wall. "
|
||
|
||
msgid "inner/outer"
|
||
msgstr "inner/outer"
|
||
|
||
msgid "outer/inner"
|
||
msgstr "outer/inner"
|
||
|
||
msgid "inner wall/outer wall/inner wall"
|
||
msgstr "inner wall/outer wall/inner wall"
|
||
|
||
msgid "Print infill first"
|
||
msgstr "Print infill first"
|
||
|
||
msgid "Order of wall/infill. false means print wall first. "
|
||
msgstr ""
|
||
"Order of wall/infill. If this is unchecked, walls will be printed before "
|
||
"infill."
|
||
|
||
msgid "Height to rod"
|
||
msgstr "Height to rod"
|
||
|
||
msgid ""
|
||
"Distance of the nozzle tip to the lower rod. Used for collision avoidance in "
|
||
"by-object printing."
|
||
msgstr ""
|
||
"Distance of the nozzle tip to the lower rod. Used for collision avoidance in "
|
||
"by-object printing."
|
||
|
||
msgid "Height to lid"
|
||
msgstr "Height to lid"
|
||
|
||
msgid ""
|
||
"Distance of the nozzle tip to the lid. Used for collision avoidance in by-"
|
||
"object printing."
|
||
msgstr ""
|
||
"Distance of the nozzle tip to the lid. Used for collision avoidance in by-"
|
||
"object printing."
|
||
|
||
msgid ""
|
||
"Clearance radius around extruder. Used for collision avoidance in by-object "
|
||
"printing."
|
||
msgstr ""
|
||
"Clearance radius around extruder. Used for collision avoidance in by-object "
|
||
"printing."
|
||
|
||
msgid "Nozzle height"
|
||
msgstr "Nozzle height"
|
||
|
||
msgid "The height of nozzle tip."
|
||
msgstr "The height of nozzle tip."
|
||
|
||
msgid "Max Radius"
|
||
msgstr "Max Radius"
|
||
|
||
msgid ""
|
||
"Max clearance radius around extruder. Used for collision avoidance in by-"
|
||
"object printing."
|
||
msgstr ""
|
||
"Max clearance radius around extruder. Used for collision avoidance in by-"
|
||
"object printing."
|
||
|
||
msgid "Extruder Color"
|
||
msgstr "Extruder Color"
|
||
|
||
msgid "Only used as a visual help on UI"
|
||
msgstr "Only used as a visual help on UI"
|
||
|
||
msgid "Extruder offset"
|
||
msgstr "Extruder offset"
|
||
|
||
msgid "Flow ratio"
|
||
msgstr "Flow ratio"
|
||
|
||
msgid ""
|
||
"The material may have volumetric change after switching between molten state "
|
||
"and crystalline state. This setting changes all extrusion flow of this "
|
||
"filament in gcode proportionally. Recommended value range is between 0.95 "
|
||
"and 1.05. Maybe you can tune this value to get nice flat surface when there "
|
||
"has slight overflow or underflow"
|
||
msgstr ""
|
||
"The material may have volumetric change after switching between molten state "
|
||
"and crystalline state. This setting changes all extrusion flow of this "
|
||
"filament in gcode proportionally. Recommended value range is between 0.95 "
|
||
"and 1.05. Maybe you can tune this value to get nice flat surface when there "
|
||
"has slight overflow or underflow"
|
||
|
||
msgid "Object flow ratio"
|
||
msgstr "Object flow ratio"
|
||
|
||
msgid "The flow ratio set by object, the meaning is the same as flow ratio."
|
||
msgstr "The flow ratio set by object, the meaning is the same as flow ratio."
|
||
|
||
msgid "Enable pressure advance"
|
||
msgstr "Enable pressure advance"
|
||
|
||
msgid ""
|
||
"Enable pressure advance, auto calibration result will be overwriten once "
|
||
"enabled. Useless for QIDI Printer"
|
||
msgstr ""
|
||
"Enable pressure advance, auto calibration result will be overwriten once "
|
||
"enabled. Useless for QIDI Printer"
|
||
|
||
msgid ""
|
||
"Pressure advance(Klipper) AKA Linear advance factor(Marlin). Useless for "
|
||
"QIDI Printer"
|
||
msgstr ""
|
||
"Pressure advance(Klipper) AKA Linear advance factor(Marlin). Useless for "
|
||
"QIDI Printer"
|
||
|
||
msgid "Filament notes"
|
||
msgstr "Filament notes"
|
||
|
||
msgid "You can put your notes regarding the filament here."
|
||
msgstr "You can put your notes regarding the filament here."
|
||
|
||
msgid "Process notes"
|
||
msgstr "Process notes"
|
||
|
||
msgid "You can put your notes regarding the process here."
|
||
msgstr "You can put your notes regarding the process here."
|
||
|
||
msgid "Printer notes"
|
||
msgstr "Printer notes"
|
||
|
||
msgid "You can put your notes regarding the printer here."
|
||
msgstr "You can put your notes regarding the printer here."
|
||
|
||
msgid "Default line width if some line width is set to be zero"
|
||
msgstr "Default line width if some line width is set to be zero"
|
||
|
||
msgid "Keep fan always on"
|
||
msgstr "Keep fan always on"
|
||
|
||
msgid ""
|
||
"If enable this setting, part cooling fan will never be stopped and will run "
|
||
"at least at minimum speed to reduce the frequency of starting and stopping"
|
||
msgstr ""
|
||
"Enabling this setting means that the part cooling fan will run continuously "
|
||
"at minimum speed instead of stopping to reduce the frequency of starting and "
|
||
"stopping."
|
||
|
||
msgid "Layer time"
|
||
msgstr "Layer time"
|
||
|
||
msgid ""
|
||
"Part cooling fan will be enabled for layers of which estimated time is "
|
||
"shorter than this value. Fan speed is interpolated between the minimum and "
|
||
"maximum fan speeds according to layer printing time"
|
||
msgstr ""
|
||
"The part cooling fan will be enabled for layers where the estimated time is "
|
||
"shorter than this value. Fan speed is interpolated between the minimum and "
|
||
"maximum fan speeds according to layer printing time."
|
||
|
||
msgid "s"
|
||
msgstr "s"
|
||
|
||
msgid "Default color"
|
||
msgstr "Default color"
|
||
|
||
msgid "Default filament color"
|
||
msgstr "Default filament color"
|
||
|
||
msgid "Required nozzle HRC"
|
||
msgstr "Required nozzle HRC"
|
||
|
||
msgid ""
|
||
"Minimum HRC of nozzle required to print the filament. Zero means no checking "
|
||
"of nozzle's HRC."
|
||
msgstr ""
|
||
"Minimum HRC of nozzle required to print the filament. Zero means no checking "
|
||
"of nozzle's HRC."
|
||
|
||
msgid ""
|
||
"This setting stands for how much volume of filament can be melted and "
|
||
"extruded per second. Printing speed is limited by max volumetric speed, in "
|
||
"case of too high and unreasonable speed setting. Can't be zero"
|
||
msgstr ""
|
||
"This setting stands for how much volume of filament can be melted and "
|
||
"extruded per second. Printing speed is limited by max volumetric speed, in "
|
||
"case of too high and unreasonable speed setting. Can't be zero"
|
||
|
||
msgid "mm³/s"
|
||
msgstr "mm³/s"
|
||
|
||
msgid "Minimal purge on wipe tower"
|
||
msgstr "Minimal purge on wipe tower"
|
||
|
||
msgid "mm³"
|
||
msgstr "mm³"
|
||
|
||
msgid "Filament load time"
|
||
msgstr "Filament load time"
|
||
|
||
msgid "Time to load new filament when switch filament. For statistics only"
|
||
msgstr "Time to load new filament when switch filament. For statistics only"
|
||
|
||
msgid "Filament unload time"
|
||
msgstr "Filament unload time"
|
||
|
||
msgid "Time to unload old filament when switch filament. For statistics only"
|
||
msgstr "Time to unload old filament when switch filament. For statistics only"
|
||
|
||
msgid ""
|
||
"Filament diameter is used to calculate extrusion in gcode, so it's important "
|
||
"and should be accurate"
|
||
msgstr ""
|
||
"Filament diameter is used to calculate extrusion in gcode, so it's important "
|
||
"and should be accurate"
|
||
|
||
msgid "Density"
|
||
msgstr "Density"
|
||
|
||
msgid "Filament density. For statistics only"
|
||
msgstr "Filament density. For statistics only"
|
||
|
||
msgid "g/cm³"
|
||
msgstr "g/cm³"
|
||
|
||
msgid "The material type of filament"
|
||
msgstr "The material type of filament"
|
||
|
||
msgid "Soluble material"
|
||
msgstr "Soluble material"
|
||
|
||
msgid ""
|
||
"Soluble material is commonly used to print support and support interface"
|
||
msgstr ""
|
||
"Soluble material is commonly used to print support and support interface"
|
||
|
||
msgid "Support material"
|
||
msgstr "Support material"
|
||
|
||
msgid ""
|
||
"Support material is commonly used to print support and support interface"
|
||
msgstr ""
|
||
"Support material is commonly used to print support and support interfaces."
|
||
|
||
msgid "Softening temperature"
|
||
msgstr "Softening temperature"
|
||
|
||
msgid ""
|
||
"The material softens at this temperature, so when the bed temperature is "
|
||
"equal to or greater than it, it's highly recommended to open the front door "
|
||
"and/or remove the upper glass to avoid cloggings."
|
||
msgstr ""
|
||
"The material softens at this temperature, so when the bed temperature is "
|
||
"equal to or greater than this, it's highly recommended to open the front "
|
||
"door and/or remove the upper glass to avoid clogs."
|
||
|
||
msgid "Price"
|
||
msgstr "Price"
|
||
|
||
msgid "Filament price. For statistics only"
|
||
msgstr "Filament price. For statistics only"
|
||
|
||
msgid "money/kg"
|
||
msgstr "money/kg"
|
||
|
||
msgid "Vendor"
|
||
msgstr "Vendor"
|
||
|
||
msgid "Vendor of filament. For show only"
|
||
msgstr "Vendor of filament. For show only"
|
||
|
||
msgid "(Undefined)"
|
||
msgstr "(Undefined)"
|
||
|
||
msgid "Infill direction"
|
||
msgstr "Infill direction"
|
||
|
||
msgid ""
|
||
"Angle for sparse infill pattern, which controls the start or main direction "
|
||
"of line"
|
||
msgstr ""
|
||
"Angle for sparse infill pattern, which controls the start or main direction "
|
||
"of line"
|
||
|
||
msgid "Sparse infill density"
|
||
msgstr "Sparse infill density"
|
||
|
||
#, c-format
|
||
msgid "Density of internal sparse infill, 100% means solid throughout"
|
||
msgstr "Density of internal sparse infill, 100% means solid throughout"
|
||
|
||
msgid "Sparse infill pattern"
|
||
msgstr "Sparse infill pattern"
|
||
|
||
msgid "Line pattern for internal sparse infill"
|
||
msgstr "Line pattern for internal sparse infill"
|
||
|
||
msgid "Grid"
|
||
msgstr "Grid"
|
||
|
||
msgid "Line"
|
||
msgstr "Line"
|
||
|
||
msgid "Cubic"
|
||
msgstr "Cubic"
|
||
|
||
msgid "Tri-hexagon"
|
||
msgstr "Tri-hexagon"
|
||
|
||
msgid "Gyroid"
|
||
msgstr "Gyroid"
|
||
|
||
msgid "Honeycomb"
|
||
msgstr "Honeycomb"
|
||
|
||
msgid "Adaptive Cubic"
|
||
msgstr "Adaptive Cubic"
|
||
|
||
msgid "3D Honeycomb"
|
||
msgstr "3D Honeycomb"
|
||
|
||
msgid "Support Cubic"
|
||
msgstr "Support Cubic"
|
||
|
||
msgid "Lightning"
|
||
msgstr "Lightning"
|
||
|
||
msgid "Cross Hatch"
|
||
msgstr "Cross Hatch"
|
||
|
||
msgid ""
|
||
"Acceleration of top surface infill. Using a lower value may improve top "
|
||
"surface quality"
|
||
msgstr ""
|
||
"This is the acceleration of top surface infill. Using a lower value may "
|
||
"improve top surface quality."
|
||
|
||
msgid "Acceleration of outer wall. Using a lower value can improve quality"
|
||
msgstr "Acceleration of outer wall. Using a lower value can improve quality"
|
||
|
||
msgid "Acceleration of inner walls. 0 means using normal printing acceleration"
|
||
msgstr ""
|
||
"Acceleration of inner walls. 0 means using normal printing acceleration"
|
||
|
||
msgid ""
|
||
"Acceleration of sparse infill. If the value is expressed as a percentage (e."
|
||
"g. 100%), it will be calculated based on the default acceleration."
|
||
msgstr ""
|
||
"Acceleration of sparse infill. If the value is expressed as a percentage (e."
|
||
"g. 100%), it will be calculated based on the default acceleration."
|
||
|
||
msgid "mm/s² or %"
|
||
msgstr "mm/s² or %"
|
||
|
||
msgid ""
|
||
"Acceleration of initial layer. Using a lower value can improve build plate "
|
||
"adhensive"
|
||
msgstr ""
|
||
"Acceleration of initial layer. Using a lower value can improve build plate "
|
||
"adhesion."
|
||
|
||
msgid "Enable accel_to_decel"
|
||
msgstr "Enable accel_to_decel"
|
||
|
||
msgid "Klipper's max_accel_to_decel will be adjusted automatically"
|
||
msgstr "Klipper's max_accel_to_decel will be adjusted automatically"
|
||
|
||
msgid "accel_to_decel"
|
||
msgstr "accel_to_decel"
|
||
|
||
msgid ""
|
||
"Klipper's max_accel_to_decel will be adjusted to this percent of acceleration"
|
||
msgstr ""
|
||
"Klipper's max_accel_to_decel will be adjusted to this percent of acceleration"
|
||
|
||
msgid "Default jerk"
|
||
msgstr "Default jerk"
|
||
|
||
msgid "Jerk of outer walls"
|
||
msgstr "Jerk of outer walls"
|
||
|
||
msgid "Jerk of inner walls"
|
||
msgstr "Jerk of inner walls"
|
||
|
||
msgid "Jerk of infill"
|
||
msgstr "Jerk of infill"
|
||
|
||
msgid "Jerk of top surface"
|
||
msgstr "Jerk of top surface"
|
||
|
||
msgid "First layer"
|
||
msgstr "First layer"
|
||
|
||
msgid "Jerk of first layer"
|
||
msgstr "Jerk of first layer"
|
||
|
||
msgid "Jerk of travel"
|
||
msgstr "Jerk of travel"
|
||
|
||
msgid "Line width of initial layer"
|
||
msgstr "Line width of first layer"
|
||
|
||
msgid "Initial layer height"
|
||
msgstr "Initial layer height"
|
||
|
||
msgid ""
|
||
"Height of initial layer. Making initial layer height thick slightly can "
|
||
"improve build plate adhension"
|
||
msgstr ""
|
||
"Height of initial layer. Making initial layer height slightly thicker can "
|
||
"improve build plate adhesion."
|
||
|
||
msgid "Speed of initial layer except the solid infill part"
|
||
msgstr "Speed of initial layer except the solid infill part"
|
||
|
||
msgid "Initial layer infill"
|
||
msgstr "Initial layer infill"
|
||
|
||
msgid "Speed of solid infill part of initial layer"
|
||
msgstr "Speed of solid infill part of initial layer"
|
||
|
||
msgid "Initial layer nozzle temperature"
|
||
msgstr "Initial layer nozzle temperature"
|
||
|
||
msgid "Nozzle temperature to print initial layer when using this filament"
|
||
msgstr "Nozzle temperature to print initial layer when using this filament"
|
||
|
||
msgid "Full fan speed at layer"
|
||
msgstr "Full fan speed at layer"
|
||
|
||
msgid ""
|
||
"Randomly jitter while printing the wall, so that the surface has a rough "
|
||
"look. This setting controls the fuzzy position"
|
||
msgstr ""
|
||
"Randomly jitter while printing the wall, so that the surface has a rough "
|
||
"look. This setting controls the fuzzy position"
|
||
|
||
msgid "Contour"
|
||
msgstr "Contour"
|
||
|
||
msgid "Contour and hole"
|
||
msgstr "Contour and hole"
|
||
|
||
msgid "All walls"
|
||
msgstr "All walls"
|
||
|
||
msgid "Fuzzy skin thickness"
|
||
msgstr "Fuzzy skin thickness"
|
||
|
||
msgid ""
|
||
"The width within which to jitter. It's adversed to be below outer wall line "
|
||
"width"
|
||
msgstr ""
|
||
"The width within which to jitter. It's adversed to be below outer wall line "
|
||
"width"
|
||
|
||
msgid "Fuzzy skin point distance"
|
||
msgstr "Fuzzy skin point distance"
|
||
|
||
msgid ""
|
||
"The average distance between the random points introduced on each line "
|
||
"segment"
|
||
msgstr ""
|
||
"The average distance between the random points introduced on each line "
|
||
"segment"
|
||
|
||
msgid "Filter out tiny gaps"
|
||
msgstr "Filter out tiny gaps"
|
||
|
||
msgid ""
|
||
"Filter out gaps smaller than the threshold specified. This setting won't "
|
||
"affact top/bottom layers"
|
||
msgstr ""
|
||
"Filter out gaps smaller than the threshold specified. This setting won't "
|
||
"affact top/bottom layers"
|
||
|
||
msgid ""
|
||
"Speed of gap infill. Gap usually has irregular line width and should be "
|
||
"printed more slowly"
|
||
msgstr ""
|
||
"Speed of gap infill. Gap usually has irregular line width and should be "
|
||
"printed more slowly"
|
||
|
||
msgid "Precise Z height"
|
||
msgstr "Precise Z height"
|
||
|
||
msgid ""
|
||
"Enable this to get precise z height of object after slicing. It will get the "
|
||
"precise object height by fine-tuning the layer heights of the last few "
|
||
"layers. Note that this is an experimental parameter."
|
||
msgstr ""
|
||
"Enable this to get precise z height of object after slicing. It will get the "
|
||
"precise object height by fine-tuning the layer heights of the last few "
|
||
"layers. Note that this is an experimental parameter."
|
||
|
||
msgid "Arc fitting"
|
||
msgstr "Arc fitting"
|
||
|
||
msgid ""
|
||
"Enable this to get a G-code file which has G2 and G3 moves. And the fitting "
|
||
"tolerance is the same as resolution"
|
||
msgstr ""
|
||
"Enable this to get a G-code file which has G2 and G3 moves. The fitting "
|
||
"tolerance is the same as resolution"
|
||
|
||
msgid "Add line number"
|
||
msgstr "Add line number"
|
||
|
||
msgid "Enable this to add line number(Nx) at the beginning of each G-Code line"
|
||
msgstr ""
|
||
"Enable this to add line number(Nx) at the beginning of each G-Code line"
|
||
|
||
msgid "Scan first layer"
|
||
msgstr "Scan first layer"
|
||
|
||
msgid ""
|
||
"Enable this to enable the camera on printer to check the quality of first "
|
||
"layer"
|
||
msgstr ""
|
||
"Enable this to enable the camera on printer to check the quality of first "
|
||
"layer"
|
||
|
||
msgid "Thumbnail size"
|
||
msgstr "Thumbnail size"
|
||
|
||
msgid "Decides the size of thumbnail stored in gcode files"
|
||
msgstr "Decides the size of thumbnail stored in gcode files"
|
||
|
||
msgid "Nozzle type"
|
||
msgstr "Nozzle type"
|
||
|
||
msgid ""
|
||
"The metallic material of nozzle. This determines the abrasive resistance of "
|
||
"nozzle, and what kind of filament can be printed"
|
||
msgstr ""
|
||
"The metallic material of the nozzle: This determines the abrasive resistance "
|
||
"of the nozzle and what kind of filament can be printed."
|
||
|
||
msgid "Undefine"
|
||
msgstr "Undefined"
|
||
|
||
msgid "Hardened steel"
|
||
msgstr "Hardened steel"
|
||
|
||
msgid "Stainless steel"
|
||
msgstr "Stainless steel"
|
||
|
||
msgid "Brass"
|
||
msgstr "Brass"
|
||
|
||
msgid "Printer structure"
|
||
msgstr "Printer structure"
|
||
|
||
msgid "The physical arrangement and components of a printing device"
|
||
msgstr "The physical arrangement and components of a printing device"
|
||
|
||
msgid "Best object position"
|
||
msgstr "Best object position"
|
||
|
||
msgid "Best auto arranging position in range [0,1] w.r.t. bed shape."
|
||
msgstr "Best auto arranging position in range [0,1] w.r.t. bed shape."
|
||
|
||
msgid "Enable this option if machine has auxiliary part cooling fan"
|
||
msgstr "Enable this option if the machine has an auxiliary part cooling fan"
|
||
|
||
msgid "Support control chamber temperature"
|
||
msgstr "Support controlling chamber temperature"
|
||
|
||
msgid ""
|
||
"This option is enabled if machine support controlling chamber temperature"
|
||
msgstr ""
|
||
"This option is enabled if machine support controlling chamber temperature"
|
||
|
||
msgid "Air filtration enhancement"
|
||
msgstr "Air filtration enhancement"
|
||
|
||
msgid "Enable this if printer support air filtration enhancement."
|
||
msgstr "Enable this if printer support air filtration enhancement."
|
||
|
||
msgid "G-code flavor"
|
||
msgstr "G-code flavor"
|
||
|
||
msgid "What kind of gcode the printer is compatible with"
|
||
msgstr "What kind of gcode the printer is compatible with"
|
||
|
||
msgid "Exclude objects"
|
||
msgstr "Exclude objects"
|
||
|
||
msgid ""
|
||
"Enable this option to add EXCLUDE OBJECT command in g-code for klipper "
|
||
"firmware printer"
|
||
msgstr ""
|
||
"Enable this option to add EXCLUDE OBJECT command in g-code for klipper "
|
||
"firmware printer"
|
||
|
||
msgid "Infill combination"
|
||
msgstr "Infill combination"
|
||
|
||
msgid ""
|
||
"Automatically Combine sparse infill of several layers to print together to "
|
||
"reduce time. Wall is still printed with original layer height."
|
||
msgstr ""
|
||
"Automatically Combine sparse infill of several layers to print together to "
|
||
"reduce time. Wall is still printed with original layer height."
|
||
|
||
msgid "Length of sparse infill anchor"
|
||
msgstr "Length of sparse infill anchor"
|
||
|
||
msgid ""
|
||
"Connect a sparse infill line to an internal perimeter with a short segment "
|
||
"of an additional perimeter. If expressed as percentage (example: 15%) it is "
|
||
"calculated over sparse infill line width. Slicer tries to connect two close "
|
||
"infill lines to a short perimeter segment. If no such perimeter segment "
|
||
"shorter than infill_anchor_max is found, the infill line is connected to a "
|
||
"perimeter segment at just one side and the length of the perimeter segment "
|
||
"taken is limited to this parameter, but no longer than anchor_length_max. "
|
||
"Set this parameter to zero to disable anchoring perimeters connected to a "
|
||
"single infill line."
|
||
msgstr ""
|
||
"Connect a sparse infill line to an internal perimeter with a short segment "
|
||
"of an additional perimeter. If expressed as percentage (example: 15%) it is "
|
||
"calculated over sparse infill line width. Slicer tries to connect two close "
|
||
"infill lines to a short perimeter segment. If no such perimeter segment "
|
||
"shorter than infill_anchor_max is found, the infill line is connected to a "
|
||
"perimeter segment at just one side and the length of the perimeter segment "
|
||
"taken is limited to this parameter, but no longer than anchor_length_max. "
|
||
"Set this parameter to zero to disable anchoring perimeters connected to a "
|
||
"single infill line."
|
||
|
||
msgid "0 (no open anchors)"
|
||
msgstr "0 (no open anchors)"
|
||
|
||
msgid "1000 (unlimited)"
|
||
msgstr "1000 (unlimited)"
|
||
|
||
msgid "Maximum length of sparse infill anchor"
|
||
msgstr "Maximum length of sparse infill anchor"
|
||
|
||
msgid ""
|
||
"Connect a sparse infill line to an internal perimeter with a short segment "
|
||
"of an additional perimeter. If expressed as percentage (example: 15%) it is "
|
||
"calculated over sparse infill line width. Slicer tries to connect two close "
|
||
"infill lines to a short perimeter segment. If no such perimeter segment "
|
||
"shorter than this parameter is found, the infill line is connected to a "
|
||
"perimeter segment at just one side and the length of the perimeter segment "
|
||
"taken is limited to infill_anchor, but no longer than this parameter. Set "
|
||
"this parameter to zero to disable anchoring."
|
||
msgstr ""
|
||
"Connect a sparse infill line to an internal perimeter with a short segment "
|
||
"of an additional perimeter. If expressed as percentage (example: 15%) it is "
|
||
"calculated over sparse infill line width. Slicer tries to connect two close "
|
||
"infill lines to a short perimeter segment. If no such perimeter segment "
|
||
"shorter than this parameter is found, the infill line is connected to a "
|
||
"perimeter segment at just one side and the length of the perimeter segment "
|
||
"taken is limited to infill_anchor, but no longer than this parameter. Set "
|
||
"this parameter to zero to disable anchoring."
|
||
|
||
msgid "0 (not anchored)"
|
||
msgstr "0 (not anchored)"
|
||
|
||
msgid "Filament to print internal sparse infill."
|
||
msgstr "Filament to print internal sparse infill."
|
||
|
||
msgid "Line width of internal sparse infill"
|
||
msgstr "Line width of internal sparse infill"
|
||
|
||
msgid "Infill/Wall overlap"
|
||
msgstr "Infill/Wall overlap"
|
||
|
||
msgid ""
|
||
"Infill area is enlarged slightly to overlap with wall for better bonding. "
|
||
"The percentage value is relative to line width of sparse infill"
|
||
msgstr ""
|
||
"Infill area is enlarged slightly to overlap with wall for better bonding. "
|
||
"The percentage value is relative to line width of sparse infill"
|
||
|
||
msgid "Speed of internal sparse infill"
|
||
msgstr "Speed of internal sparse infill"
|
||
|
||
msgid "Interface shells"
|
||
msgstr "Interface shells"
|
||
|
||
msgid ""
|
||
"Force the generation of solid shells between adjacent materials/volumes. "
|
||
"Useful for multi-extruder prints with translucent materials or manual "
|
||
"soluble support material"
|
||
msgstr ""
|
||
"Force the generation of solid shells between adjacent materials/volumes. "
|
||
"Useful for multi-extruder prints with translucent materials or manual "
|
||
"soluble support material"
|
||
|
||
msgid "Maximum width of a segmented region"
|
||
msgstr "Maximum width of a segmented region"
|
||
|
||
msgid "Maximum width of a segmented region. Zero disables this feature."
|
||
msgstr ""
|
||
"Maximum width of a segmented region. A value of 0 disables this feature."
|
||
|
||
msgid "Interlocking depth of a segmented region"
|
||
msgstr "Interlocking depth of a segmented region"
|
||
|
||
msgid "Interlocking depth of a segmented region. Zero disables this feature."
|
||
msgstr "Interlocking depth of a segmented region. Zero disables this feature."
|
||
|
||
msgid "Ironing Type"
|
||
msgstr "Ironing Type"
|
||
|
||
msgid ""
|
||
"Ironing is using small flow to print on same height of surface again to make "
|
||
"flat surface more smooth. This setting controls which layer being ironed"
|
||
msgstr ""
|
||
"Ironing is using small flow to print on same height of surface again to make "
|
||
"flat surface more smooth. This setting controls which layer being ironed"
|
||
|
||
msgid "No ironing"
|
||
msgstr "No ironing"
|
||
|
||
msgid "All solid layer"
|
||
msgstr "All solid layer"
|
||
|
||
msgid "Ironing Pattern"
|
||
msgstr "Ironing Pattern"
|
||
|
||
msgid "Ironing flow"
|
||
msgstr "Ironing flow"
|
||
|
||
msgid ""
|
||
"The amount of material to extrude during ironing. Relative to flow of normal "
|
||
"layer height. Too high value results in overextrusion on the surface"
|
||
msgstr ""
|
||
"The amount of material to extrude during ironing. Relative to flow of normal "
|
||
"layer height. Too high value results in overextrusion on the surface"
|
||
|
||
msgid "Ironing line spacing"
|
||
msgstr "Ironing line spacing"
|
||
|
||
msgid "The distance between the lines of ironing"
|
||
msgstr "The distance between the lines of ironing"
|
||
|
||
msgid "Ironing speed"
|
||
msgstr "Ironing speed"
|
||
|
||
msgid "Print speed of ironing lines"
|
||
msgstr "Print speed of ironing lines"
|
||
|
||
msgid "ironing direction"
|
||
msgstr "ironing direction"
|
||
|
||
msgid ""
|
||
"Angle for ironing, which controls the relative angle between the top surface "
|
||
"and ironing"
|
||
msgstr ""
|
||
"Angle for ironing, which controls the relative angle between the top surface "
|
||
"and ironing"
|
||
|
||
msgid "This gcode part is inserted at every layer change after lift z"
|
||
msgstr "This gcode part is inserted at every layer change after lift z"
|
||
|
||
msgid "Supports silent mode"
|
||
msgstr "Supports silent mode"
|
||
|
||
msgid ""
|
||
"Whether the machine supports silent mode in which machine use lower "
|
||
"acceleration to print"
|
||
msgstr ""
|
||
"Whether the machine supports silent mode in which machine uses lower "
|
||
"acceleration to print more quietly"
|
||
|
||
msgid ""
|
||
"This G-code will be used as a code for the pause print. User can insert "
|
||
"pause G-code in gcode viewer"
|
||
msgstr ""
|
||
"This G-code will be used as a code for the pause print. User can insert "
|
||
"pause G-code in gcode viewer"
|
||
|
||
msgid "This G-code will be used as a custom code"
|
||
msgstr "This G-code will be used as a custom code"
|
||
|
||
msgid "Maximum speed X"
|
||
msgstr "Maximum speed X"
|
||
|
||
msgid "Maximum speed Y"
|
||
msgstr "Maximum speed Y"
|
||
|
||
msgid "Maximum speed Z"
|
||
msgstr "Maximum speed Z"
|
||
|
||
msgid "Maximum speed E"
|
||
msgstr "Maximum speed E"
|
||
|
||
msgid "Machine limits"
|
||
msgstr "Machine limits"
|
||
|
||
msgid "Maximum X speed"
|
||
msgstr "Maximum X speed"
|
||
|
||
msgid "Maximum Y speed"
|
||
msgstr "Maximum Y speed"
|
||
|
||
msgid "Maximum Z speed"
|
||
msgstr "Maximum Z speed"
|
||
|
||
msgid "Maximum E speed"
|
||
msgstr "Maximum E speed"
|
||
|
||
msgid "Maximum acceleration X"
|
||
msgstr "Maximum acceleration X"
|
||
|
||
msgid "Maximum acceleration Y"
|
||
msgstr "Maximum acceleration Y"
|
||
|
||
msgid "Maximum acceleration Z"
|
||
msgstr "Maximum acceleration Z"
|
||
|
||
msgid "Maximum acceleration E"
|
||
msgstr "Maximum acceleration E"
|
||
|
||
msgid "Maximum acceleration of the X axis"
|
||
msgstr "Maximum acceleration of the X axis"
|
||
|
||
msgid "Maximum acceleration of the Y axis"
|
||
msgstr "Maximum acceleration of the Y axis"
|
||
|
||
msgid "Maximum acceleration of the Z axis"
|
||
msgstr "Maximum acceleration of the Z axis"
|
||
|
||
msgid "Maximum acceleration of the E axis"
|
||
msgstr "Maximum acceleration of the E axis"
|
||
|
||
msgid "Maximum jerk X"
|
||
msgstr "Maximum jerk X"
|
||
|
||
msgid "Maximum jerk Y"
|
||
msgstr "Maximum jerk Y"
|
||
|
||
msgid "Maximum jerk Z"
|
||
msgstr "Maximum jerk Z"
|
||
|
||
msgid "Maximum jerk E"
|
||
msgstr "Maximum jerk E"
|
||
|
||
msgid "Maximum jerk of the X axis"
|
||
msgstr "Maximum jerk of the X axis"
|
||
|
||
msgid "Maximum jerk of the Y axis"
|
||
msgstr "Maximum jerk of the Y axis"
|
||
|
||
msgid "Maximum jerk of the Z axis"
|
||
msgstr "Maximum jerk of the Z axis"
|
||
|
||
msgid "Maximum jerk of the E axis"
|
||
msgstr "Maximum jerk of the E axis"
|
||
|
||
msgid "Minimum speed for extruding"
|
||
msgstr "Minimum speed for extruding"
|
||
|
||
msgid "Minimum speed for extruding (M205 S)"
|
||
msgstr "Minimum speed for extruding (M205 S)"
|
||
|
||
msgid "Minimum travel speed"
|
||
msgstr "Minimum travel speed"
|
||
|
||
msgid "Minimum travel speed (M205 T)"
|
||
msgstr "Minimum travel speed (M205 T)"
|
||
|
||
msgid "Maximum acceleration for extruding"
|
||
msgstr "Maximum acceleration for extruding"
|
||
|
||
msgid "Maximum acceleration for extruding (M204 P)"
|
||
msgstr "Maximum acceleration for extruding (M204 P)"
|
||
|
||
msgid "Maximum acceleration for retracting"
|
||
msgstr "Maximum acceleration for retracting"
|
||
|
||
msgid "Maximum acceleration for retracting (M204 R)"
|
||
msgstr "Maximum acceleration for retracting (M204 R)"
|
||
|
||
msgid "Maximum acceleration for travel"
|
||
msgstr "Maximum acceleration for travel"
|
||
|
||
msgid "Maximum acceleration for travel (M204 T)"
|
||
msgstr "Maximum acceleration for travel (M204 T)"
|
||
|
||
msgid ""
|
||
"Part cooling fan speed may be increased when auto cooling is enabled. This "
|
||
"is the maximum speed limitation of part cooling fan"
|
||
msgstr ""
|
||
"The part cooling fan speed may be increased when auto cooling is enabled. "
|
||
"This is the maximum speed for the part cooling fan."
|
||
|
||
msgid "Max"
|
||
msgstr "Max"
|
||
|
||
msgid ""
|
||
"The largest printable layer height for extruder. Used to limit the maximum "
|
||
"layer height when enable adaptive layer height"
|
||
msgstr ""
|
||
"The largest printable layer height for extruder. Used to limit the maximum "
|
||
"layer height when using adaptive layer height"
|
||
|
||
msgid "Minimum speed for part cooling fan"
|
||
msgstr "Minimum speed for part cooling fan"
|
||
|
||
msgid ""
|
||
"Speed of auxiliary part cooling fan. Auxiliary fan will run at this speed "
|
||
"during printing except the first several layers which are defined by no "
|
||
"cooling layers"
|
||
msgstr ""
|
||
"Speed of auxiliary part cooling fan. The auxiliary fan will run at this "
|
||
"speed during printing, except for the first several layers, which are "
|
||
"defined by no cooling layers"
|
||
|
||
msgid "Min"
|
||
msgstr "Min"
|
||
|
||
msgid ""
|
||
"The lowest printable layer height for extruder. Used to limit the minimum "
|
||
"layer height when enable adaptive layer height"
|
||
msgstr ""
|
||
"The lowest printable layer height for extruder. Used to limit the minimum "
|
||
"layer height when using adaptive layer height"
|
||
|
||
msgid "Min print speed"
|
||
msgstr "Min print speed"
|
||
|
||
msgid "The minimum printing speed when slow down for cooling"
|
||
msgstr "The minimum printing speed when slow down for cooling"
|
||
|
||
msgid "Nozzle diameter"
|
||
msgstr "Nozzle diameter"
|
||
|
||
msgid "Diameter of nozzle"
|
||
msgstr "Diameter of nozzle"
|
||
|
||
msgid "Host Type"
|
||
msgstr "Host Type"
|
||
|
||
msgid ""
|
||
"Slic3r can upload G-code files to a printer host. This field must contain "
|
||
"the kind of the host."
|
||
msgstr ""
|
||
"Slic3r can upload G-code files to a printer host. This field must contain "
|
||
"the kind of the host."
|
||
|
||
msgid "Nozzle volume"
|
||
msgstr "Nozzle volume"
|
||
|
||
msgid "Volume of nozzle between the cutter and the end of nozzle"
|
||
msgstr "Volume of nozzle between the filament cutter and the end of the nozzle"
|
||
|
||
msgid "Start end points"
|
||
msgstr "Start end points"
|
||
|
||
msgid "The start and end points which are from cutter area to garbage can."
|
||
msgstr "The start and end points which are from cutter area to garbage can."
|
||
|
||
msgid "Reduce infill retraction"
|
||
msgstr "Reduce infill retraction"
|
||
|
||
msgid ""
|
||
"Don't retract when the travel is in infill area absolutely. That means the "
|
||
"oozing can't been seen. This can reduce times of retraction for complex "
|
||
"model and save printing time, but make slicing and G-code generating slower"
|
||
msgstr ""
|
||
"Don't retract when the travel is in infill area absolutely. That means the "
|
||
"oozing can't been seen. This can reduce times of retraction for complex "
|
||
"model and save printing time, but make slicing and G-code generating slower"
|
||
|
||
msgid "Filename format"
|
||
msgstr "Filename format"
|
||
|
||
msgid "User can self-define the project file name when export"
|
||
msgstr "User can self-define the project file name when export"
|
||
|
||
msgid "Detect overhang wall"
|
||
msgstr "Detect overhang walls"
|
||
|
||
msgid ""
|
||
"Detect the overhang percentage relative to line width and use different "
|
||
"speed to print. For 100 percent overhang, bridge speed is used."
|
||
msgstr ""
|
||
"Detect the overhang percentage relative to line width and use different "
|
||
"speed to print. For 100 percent overhang, bridge speed is used."
|
||
|
||
msgid "Smooth speed discontinuity area"
|
||
msgstr ""
|
||
|
||
msgid "Add the speed transition between discontinuity area."
|
||
msgstr ""
|
||
|
||
msgid "Smooth coefficient"
|
||
msgstr ""
|
||
|
||
msgid "The smaller the number, the longer the speed transition path."
|
||
msgstr ""
|
||
|
||
msgid "Line width of inner wall"
|
||
msgstr "Line width of inner walls"
|
||
|
||
msgid "Speed of inner wall"
|
||
msgstr "Speed of inner wall"
|
||
|
||
msgid "Number of walls of every layer"
|
||
msgstr "Number of walls of every layer"
|
||
|
||
msgid "Post-processing Scripts"
|
||
msgstr "Post-processing Scripts"
|
||
|
||
msgid ""
|
||
"If you want to process the output G-code through custom scripts, just list "
|
||
"their absolute paths here. Separate multiple scripts with a semicolon. "
|
||
"Scripts will be passed the absolute path to the G-code file as the first "
|
||
"argument, and variables of settings also can be read"
|
||
msgstr ""
|
||
"If you want to process the output G-code through custom scripts, just list "
|
||
"their absolute paths here. Separate multiple scripts with a semicolon. "
|
||
"Scripts will be passed the absolute path to the G-code file as the first "
|
||
"argument, and variables of settings also can be read"
|
||
|
||
msgid "Raft contact Z distance"
|
||
msgstr "Raft contact Z distance"
|
||
|
||
msgid "Z gap between object and raft. Ignored for soluble interface"
|
||
msgstr "Z gap between object and raft. Ignored for soluble interface"
|
||
|
||
msgid "Raft expansion"
|
||
msgstr "Raft expansion"
|
||
|
||
msgid "Expand all raft layers in XY plane"
|
||
msgstr "Expand all raft layers in XY plane"
|
||
|
||
msgid "Initial layer density"
|
||
msgstr "Initial layer density"
|
||
|
||
msgid "Density of the first raft or support layer"
|
||
msgstr "Density of the first raft or support layer"
|
||
|
||
msgid "Initial layer expansion"
|
||
msgstr "Initial layer expansion"
|
||
|
||
msgid "Expand the first raft or support layer to improve bed plate adhesion"
|
||
msgstr "Expand the first raft or support layer to improve bed plate adhesion"
|
||
|
||
msgid "Raft layers"
|
||
msgstr "Raft layers"
|
||
|
||
msgid ""
|
||
"Object will be raised by this number of support layers. Use this function to "
|
||
"avoid wrapping when print ABS"
|
||
msgstr ""
|
||
"Object will be raised by this number of support layers. Use this function to "
|
||
"avoid wrapping when print ABS"
|
||
|
||
msgid ""
|
||
"G-code path is generated after simplifying the contour of model to avoid too "
|
||
"many points and gcode lines in the gcode file. Smaller value means higher "
|
||
"resolution and more time to slice"
|
||
msgstr ""
|
||
"G-code path is generated after simplifying the contour of model to avoid too "
|
||
"many points and g-code lines in the g-code file. Smaller values mean higher "
|
||
"resolution and longer slicing times."
|
||
|
||
msgid "Travel distance threshold"
|
||
msgstr "Travel distance threshold"
|
||
|
||
msgid ""
|
||
"Only trigger retraction when the travel distance is longer than this "
|
||
"threshold"
|
||
msgstr ""
|
||
"Only trigger retraction when the travel distance is longer than this "
|
||
"threshold"
|
||
|
||
msgid "Retract amount before wipe"
|
||
msgstr "Retract amount before wipe"
|
||
|
||
msgid ""
|
||
"The length of fast retraction before wipe, relative to retraction length"
|
||
msgstr ""
|
||
"The length of fast retraction before wipe, relative to retraction length"
|
||
|
||
msgid "Retract when change layer"
|
||
msgstr "Retract when change layer"
|
||
|
||
msgid "Force a retraction when changes layer"
|
||
msgstr "Force a retraction when changes layer"
|
||
|
||
msgid "Retraction Length"
|
||
msgstr "Retraction Length"
|
||
|
||
msgid ""
|
||
"Some amount of material in extruder is pulled back to avoid ooze during long "
|
||
"travel. Set zero to disable retraction"
|
||
msgstr ""
|
||
"Some amount of material in extruder is pulled back to avoid ooze during long "
|
||
"travel. Set zero to disable retraction"
|
||
|
||
msgid "Long retraction when cut(experimental)"
|
||
msgstr "Long retraction when cut (experimental)"
|
||
|
||
msgid ""
|
||
"Experimental feature.Retracting and cutting off the filament at a longer "
|
||
"distance during changes to minimize purge.While this reduces flush "
|
||
"significantly, it may also raise the risk of nozzle clogs or other printing "
|
||
"problems."
|
||
msgstr ""
|
||
"Experimental feature: Retracting and cutting off the filament at a longer "
|
||
"distance during changes to minimize purge.While this reduces flush "
|
||
"significantly, it may also raise the risk of nozzle clogs or other printing "
|
||
"problems."
|
||
|
||
msgid "Retraction distance when cut"
|
||
msgstr "Retraction distance when cut"
|
||
|
||
msgid ""
|
||
"Experimental feature.Retraction length before cutting off during filament "
|
||
"change"
|
||
msgstr ""
|
||
"Experimental feature. Retraction length before cutting off during filament "
|
||
"change"
|
||
|
||
msgid "Z hop when retract"
|
||
msgstr "Z hop when retract"
|
||
|
||
msgid ""
|
||
"Whenever the retraction is done, the nozzle is lifted a little to create "
|
||
"clearance between nozzle and the print. It prevents nozzle from hitting the "
|
||
"print when travel moves. Using spiral line to lift z can prevent stringing"
|
||
msgstr ""
|
||
"Whenever there is a retraction, the nozzle is lifted a little to create "
|
||
"clearance between the nozzle and the print. This prevents the nozzle from "
|
||
"hitting the print when traveling. Using a spiral line to lift z can prevent "
|
||
"stringing."
|
||
|
||
msgid "Z hop lower boundary"
|
||
msgstr "Z hop lower boundary"
|
||
|
||
msgid ""
|
||
"Z hop will only come into effect when Z is above this value and is below the "
|
||
"parameter: \"Z hop upper boundary\""
|
||
msgstr ""
|
||
"Z hop will only come into effect when Z is above this value and is below the "
|
||
"parameter: \"Z hop upper boundary\""
|
||
|
||
msgid "Z hop upper boundary"
|
||
msgstr "Z hop upper boundary"
|
||
|
||
msgid ""
|
||
"If this value is positive, Z hop will only come into effect when Z is above "
|
||
"the parameter: \"Z hop lower boundary\" and is below this value"
|
||
msgstr ""
|
||
"If this value is positive, Z hop will only come into effect when Z is above "
|
||
"the parameter: \"Z hop lower boundary\" and is below this value"
|
||
|
||
msgid "Z Hop Type"
|
||
msgstr "Z Hop Type"
|
||
|
||
msgid "Slope"
|
||
msgstr "Slope"
|
||
|
||
msgid "Spiral"
|
||
msgstr "Spiral"
|
||
|
||
msgid "Direct drive"
|
||
msgstr "Direct drive"
|
||
|
||
msgid "Bowden"
|
||
msgstr "Bowden"
|
||
|
||
msgid "Extra length on restart"
|
||
msgstr "Extra length on restart"
|
||
|
||
msgid "Retraction Speed"
|
||
msgstr "Retraction Speed"
|
||
|
||
msgid "Speed of retractions"
|
||
msgstr "Speed of retractions"
|
||
|
||
msgid "Deretraction Speed"
|
||
msgstr "Deretraction Speed"
|
||
|
||
msgid ""
|
||
"Speed for reloading filament into extruder. Zero means the same speed as "
|
||
"retraction"
|
||
msgstr ""
|
||
"Speed for reloading filament into extruder: 0 means the same speed as "
|
||
"retraction"
|
||
|
||
msgid "Seam position"
|
||
msgstr "Seam position"
|
||
|
||
msgid "The start position to print each part of outer wall"
|
||
msgstr "The start position to print each part of outer wall"
|
||
|
||
msgid "Nearest"
|
||
msgstr "Nearest"
|
||
|
||
msgid "Aligned"
|
||
msgstr "Aligned"
|
||
|
||
msgid "Back"
|
||
msgstr "Back"
|
||
|
||
msgid "Random"
|
||
msgstr "Random"
|
||
|
||
msgid "Seam gap"
|
||
msgstr "Seam gap"
|
||
|
||
msgid ""
|
||
"In order to reduce the visibility of the seam in a closed loop extrusion, "
|
||
"the loop is interrupted and shortened by a specified amount.\n"
|
||
"This amount as a percentage of the current extruder diameter. The default "
|
||
"value for this parameter is 15"
|
||
msgstr ""
|
||
"In order to reduce the visibility of the seam in a closed loop extrusion, "
|
||
"the loop is interrupted and shortened by a specified amount.\n"
|
||
"This amount as a percentage of the current extruder diameter. The default "
|
||
"value for this parameter is 15"
|
||
|
||
msgid "Scarf joint seam (experimental)"
|
||
msgstr "Scarf joint seam (experimental)"
|
||
|
||
msgid "Use scarf joint to minimize seam visibility and increase seam strength."
|
||
msgstr ""
|
||
"Use scarf joint to minimize seam visibility and increase seam strength."
|
||
|
||
msgid "Conditional scarf joint"
|
||
msgstr "Conditional scarf joint"
|
||
|
||
msgid ""
|
||
"Apply scarf joints only to smooth perimeters where traditional seams do not "
|
||
"conceal the seams at sharp corners effectively."
|
||
msgstr ""
|
||
"Apply scarf joints only to smooth perimeters where traditional seams do not "
|
||
"conceal the seams at sharp corners effectively."
|
||
|
||
msgid "Conditional angle threshold"
|
||
msgstr "Conditional angle threshold"
|
||
|
||
msgid ""
|
||
"This option sets the threshold angle for applying a conditional scarf joint "
|
||
"seam.\n"
|
||
"If the seam angle within the perimeter loop exceeds this value (indicating "
|
||
"the absence of sharp corners), a scarf joint seam will be used. The default "
|
||
"value is 155°."
|
||
msgstr ""
|
||
"This option sets the threshold angle for applying a conditional scarf joint "
|
||
"seam.\n"
|
||
"If the seam angle within the perimeter loop exceeds this value (indicating "
|
||
"the absence of sharp corners), a scarf joint seam will be used. The default "
|
||
"value is 155°."
|
||
|
||
msgid "Scarf start height"
|
||
msgstr "Scarf start height"
|
||
|
||
msgid ""
|
||
"Start height of the scarf.\n"
|
||
"This amount can be specified in millimeters or as a percentage of the "
|
||
"current layer height. The default value for this parameter is 0."
|
||
msgstr ""
|
||
"Start height of the scarf.\n"
|
||
"This amount can be specified in millimeters or as a percentage of the "
|
||
"current layer height. The default value for this parameter is 0."
|
||
|
||
msgid "Scarf around entire wall"
|
||
msgstr "Scarf around entire wall"
|
||
|
||
msgid "The scarf extends to the entire length of the wall."
|
||
msgstr "The scarf extends to the entire length of the wall."
|
||
|
||
msgid "Scarf length"
|
||
msgstr "Scarf length"
|
||
|
||
msgid ""
|
||
"Length of the scarf. Setting this parameter to zero effectively disables the "
|
||
"scarf."
|
||
msgstr ""
|
||
"Length of the scarf. Setting this parameter to zero effectively disables the "
|
||
"scarf."
|
||
|
||
msgid "Scarf steps"
|
||
msgstr "Scarf steps"
|
||
|
||
msgid "Minimum number of segments of each scarf."
|
||
msgstr "Minimum number of segments of each scarf."
|
||
|
||
msgid "Scarf joint for inner walls"
|
||
msgstr "Scarf joint for inner walls"
|
||
|
||
msgid "Use scarf joint for inner walls as well."
|
||
msgstr "Use scarf joint for inner walls as well."
|
||
|
||
msgid "Wipe speed"
|
||
msgstr "Wipe speed"
|
||
|
||
msgid ""
|
||
"The wipe speed is determined by the speed setting specified in this "
|
||
"configuration.If the value is expressed as a percentage (e.g. 80%), it will "
|
||
"be calculated based on the travel speed setting above.The default value for "
|
||
"this parameter is 80%"
|
||
msgstr ""
|
||
"The wipe speed is determined by the speed setting specified in this "
|
||
"configuration.If the value is expressed as a percentage (e.g. 80%), it will "
|
||
"be calculated based on the travel speed setting above.The default value for "
|
||
"this parameter is 80%"
|
||
|
||
msgid "Skirt distance"
|
||
msgstr "Skirt distance"
|
||
|
||
msgid "Distance from skirt to brim or object"
|
||
msgstr "Distance from skirt to brim or object"
|
||
|
||
msgid "Skirt height"
|
||
msgstr "Skirt height"
|
||
|
||
msgid "How many layers of skirt. Usually only one layer"
|
||
msgstr "How many layers of skirt. Usually only one layer"
|
||
|
||
msgid "Skirt loops"
|
||
msgstr "Skirt loops"
|
||
|
||
msgid "Number of loops for the skirt. Zero means disabling skirt"
|
||
msgstr "Number of loops for the skirt. Zero means disabling skirt"
|
||
|
||
msgid ""
|
||
"The printing speed in exported gcode will be slowed down, when the estimated "
|
||
"layer time is shorter than this value, to get better cooling for these layers"
|
||
msgstr ""
|
||
"The printing speed in exported gcode will be slowed down, when the estimated "
|
||
"layer time is shorter than this value, to get better cooling for these layers"
|
||
|
||
msgid "Minimum sparse infill threshold"
|
||
msgstr "Minimum sparse infill threshold"
|
||
|
||
msgid ""
|
||
"Sparse infill area which is smaller than threshold value is replaced by "
|
||
"internal solid infill"
|
||
msgstr ""
|
||
"Sparse infill area which is smaller than threshold value is replaced by "
|
||
"internal solid infill"
|
||
|
||
msgid "mm²"
|
||
msgstr "mm²"
|
||
|
||
msgid "Line width of internal solid infill"
|
||
msgstr "Line width of internal solid infill"
|
||
|
||
msgid "Speed of internal solid infill, not the top and bottom surface"
|
||
msgstr "Speed of internal solid infill, not the top and bottom surface"
|
||
|
||
msgid ""
|
||
"Spiralize smooths out the z moves of the outer contour. And turns a solid "
|
||
"model into a single walled print with solid bottom layers. The final "
|
||
"generated model has no seam"
|
||
msgstr ""
|
||
"Spiralize smooths out the z moves of the outer contour. And turns a solid "
|
||
"model into a single walled print with solid bottom layers. The final "
|
||
"generated model has no seam"
|
||
|
||
msgid "Smooth Spiral"
|
||
msgstr "Smooth Spiral"
|
||
|
||
msgid ""
|
||
"Smooth Spiral smoothes out X and Y moves as wellresulting in no visible seam "
|
||
"at all, even in the XY directions on walls that are not vertical"
|
||
msgstr ""
|
||
"Smooth Spiral smoothes out X and Y moves as wellresulting in no visible seam "
|
||
"at all, even in the XY directions on walls that are not vertical"
|
||
|
||
msgid "Max XY Smoothing"
|
||
msgstr "Max XY Smoothing"
|
||
|
||
msgid ""
|
||
"Maximum distance to move points in XY to try to achieve a smooth spiralIf "
|
||
"expressed as a %, it will be computed over nozzle diameter"
|
||
msgstr ""
|
||
"Maximum distance to move points in XY to try to achieve a smooth spiral. If "
|
||
"expressed as a %, it will be computed over nozzle diameter"
|
||
|
||
msgid ""
|
||
"If smooth or traditional mode is selected, a timelapse video will be "
|
||
"generated for each print. After each layer is printed, a snapshot is taken "
|
||
"with the chamber camera. All of these snapshots are composed into a "
|
||
"timelapse video when printing completes. If smooth mode is selected, the "
|
||
"toolhead will move to the excess chute after each layer is printed and then "
|
||
"take a snapshot. Since the melt filament may leak from the nozzle during the "
|
||
"process of taking a snapshot, prime tower is required for smooth mode to "
|
||
"wipe nozzle."
|
||
msgstr ""
|
||
"If smooth or traditional mode is selected, a timelapse video will be "
|
||
"generated for each print. After each layer is printed, a snapshot is taken "
|
||
"with the chamber camera. All of these snapshots are composed into a "
|
||
"timelapse video when printing completes. If smooth mode is selected, the "
|
||
"toolhead will move to the excess chute after each layer is printed and then "
|
||
"take a snapshot. Since the melt filament may leak from the nozzle during the "
|
||
"process of taking a snapshot, prime tower is required for smooth mode to "
|
||
"wipe nozzle."
|
||
|
||
msgid "Traditional"
|
||
msgstr "Traditional"
|
||
|
||
msgid "Temperature variation"
|
||
msgstr "Temperature variation"
|
||
|
||
msgid "Start G-code"
|
||
msgstr "Start G-code"
|
||
|
||
msgid "Start G-code when start the whole printing"
|
||
msgstr "Start G-code when start the whole printing"
|
||
|
||
msgid "Start G-code when start the printing of this filament"
|
||
msgstr "Start G-code when start the printing of this filament"
|
||
|
||
msgid "Slice gap closing radius"
|
||
msgstr "Slice gap closing radius"
|
||
|
||
msgid ""
|
||
"Cracks smaller than 2x gap closing radius are being filled during the "
|
||
"triangle mesh slicing. The gap closing operation may reduce the final print "
|
||
"resolution, therefore it is advisable to keep the value reasonably low."
|
||
msgstr ""
|
||
"Cracks smaller than 2x gap closing radius are being filled during the "
|
||
"triangle mesh slicing. The gap closing operation may reduce the final print "
|
||
"resolution, therefore it is advisable to keep the value reasonably low."
|
||
|
||
msgid "Slicing Mode"
|
||
msgstr "Slicing Mode"
|
||
|
||
msgid ""
|
||
"Use \"Even-odd\" for 3DLabPrint airplane models. Use \"Close holes\" to "
|
||
"close all holes in the model."
|
||
msgstr ""
|
||
"Use \"Even-odd\" for 3DLabPrint airplane models. Use \"Close holes\" to "
|
||
"close all holes in the model."
|
||
|
||
msgid "Regular"
|
||
msgstr "Regular"
|
||
|
||
msgid "Even-odd"
|
||
msgstr "Even-odd"
|
||
|
||
msgid "Close holes"
|
||
msgstr "Close holes"
|
||
|
||
msgid "Enable support"
|
||
msgstr "Enable support"
|
||
|
||
msgid "Enable support generation."
|
||
msgstr "Enable support generation."
|
||
|
||
msgid ""
|
||
"normal(auto) and tree(auto) is used to generate support automatically. If "
|
||
"normal(manual) or tree(manual) is selected, only support enforcers are "
|
||
"generated"
|
||
msgstr ""
|
||
"normal(auto) and tree(auto) is used to generate support automatically. If "
|
||
"normal(manual) or tree(manual) is selected, only support enforcers are "
|
||
"generated"
|
||
|
||
msgid "normal(auto)"
|
||
msgstr "normal(auto)"
|
||
|
||
msgid "tree(auto)"
|
||
msgstr "tree(auto)"
|
||
|
||
msgid "normal(manual)"
|
||
msgstr "normal(manual)"
|
||
|
||
msgid "tree(manual)"
|
||
msgstr "tree(manual)"
|
||
|
||
msgid "Support/object xy distance"
|
||
msgstr "Support/object xy distance"
|
||
|
||
msgid "XY separation between an object and its support"
|
||
msgstr "XY separation between an object and its support"
|
||
|
||
msgid "Support/object first layer gap"
|
||
msgstr "Support/object first layer gap"
|
||
|
||
msgid "XY separation between an object and its support at the first layer."
|
||
msgstr "XY separation between an object and its support at the first layer."
|
||
|
||
msgid "Pattern angle"
|
||
msgstr "Pattern angle"
|
||
|
||
msgid "Use this setting to rotate the support pattern on the horizontal plane."
|
||
msgstr ""
|
||
"Use this setting to rotate the support pattern on the horizontal plane."
|
||
|
||
msgid "On build plate only"
|
||
msgstr "On build plate only"
|
||
|
||
msgid "Don't create support on model surface, only on build plate"
|
||
msgstr "Don't create support on model surface, only on build plate"
|
||
|
||
msgid "Support critical regions only"
|
||
msgstr "Support critical regions only"
|
||
|
||
msgid ""
|
||
"Only create support for critical regions including sharp tail, cantilever, "
|
||
"etc."
|
||
msgstr ""
|
||
"Only create support for critical regions including sharp tail, cantilever, "
|
||
"etc."
|
||
|
||
msgid "Remove small overhangs"
|
||
msgstr "Remove small overhangs"
|
||
|
||
msgid "Remove small overhangs that possibly need no supports."
|
||
msgstr "Remove small overhangs that possibly need no supports."
|
||
|
||
msgid "Top Z distance"
|
||
msgstr "Top Z distance"
|
||
|
||
msgid "The z gap between the top support interface and object"
|
||
msgstr "The z gap between the top support interface and object"
|
||
|
||
msgid "Bottom Z distance"
|
||
msgstr "Bottom Z distance"
|
||
|
||
msgid "The z gap between the bottom support interface and object"
|
||
msgstr "The z gap between the bottom support interface and object"
|
||
|
||
msgid "Support/raft base"
|
||
msgstr "Support/raft base"
|
||
|
||
msgid ""
|
||
"Filament to print support base and raft. \"Default\" means no specific "
|
||
"filament for support and current filament is used"
|
||
msgstr ""
|
||
"Filament to print support base and raft. \"Default\" means no specific "
|
||
"filament for support and current filament is used"
|
||
|
||
msgid "Avoid interface filament for base"
|
||
msgstr "Avoid interface filament for base"
|
||
|
||
msgid ""
|
||
"Avoid using support interface filament to print support base if possible."
|
||
msgstr ""
|
||
"Avoid using support interface filament to print support base if possible."
|
||
|
||
msgid "Line width of support"
|
||
msgstr "Line width of support"
|
||
|
||
msgid "Interface use loop pattern"
|
||
msgstr "Interface use loop pattern"
|
||
|
||
msgid ""
|
||
"Cover the top contact layer of the supports with loops. Disabled by default."
|
||
msgstr ""
|
||
"Cover the top contact layer of the supports with loops. Disabled by default."
|
||
|
||
msgid "Support/raft interface"
|
||
msgstr "Support/raft interface"
|
||
|
||
msgid ""
|
||
"Filament to print support interface. \"Default\" means no specific filament "
|
||
"for support interface and current filament is used"
|
||
msgstr ""
|
||
"Filament to print support interface. \"Default\" means no specific filament "
|
||
"for support interface and current filament is used"
|
||
|
||
msgid "Top interface layers"
|
||
msgstr "Top interface layers"
|
||
|
||
msgid "Number of top interface layers"
|
||
msgstr "Number of top interface layers"
|
||
|
||
msgid "Bottom interface layers"
|
||
msgstr "Bottom interface layers"
|
||
|
||
msgid "Number of bottom interface layers"
|
||
msgstr "Number of bottom interface layers"
|
||
|
||
msgid "Same as top"
|
||
msgstr "Same as top"
|
||
|
||
msgid "Top interface spacing"
|
||
msgstr "Top interface spacing"
|
||
|
||
msgid "Spacing of interface lines. Zero means solid interface"
|
||
msgstr "Spacing of interface lines. Zero means solid interface"
|
||
|
||
msgid "Bottom interface spacing"
|
||
msgstr "Bottom interface spacing"
|
||
|
||
msgid "Spacing of bottom interface lines. Zero means solid interface"
|
||
msgstr "Spacing of bottom interface lines. Zero means solid interface"
|
||
|
||
msgid "Speed of support interface"
|
||
msgstr "Speed of support interface"
|
||
|
||
msgid "Base pattern"
|
||
msgstr "Base pattern"
|
||
|
||
msgid "Line pattern of support"
|
||
msgstr "Line pattern of support"
|
||
|
||
msgid "Rectilinear grid"
|
||
msgstr "Rectilinear grid"
|
||
|
||
msgid "Hollow"
|
||
msgstr "Hollow"
|
||
|
||
msgid "Interface pattern"
|
||
msgstr "Interface pattern"
|
||
|
||
msgid ""
|
||
"Line pattern of support interface. Default pattern for non-soluble support "
|
||
"interface is Rectilinear, while default pattern for soluble support "
|
||
"interface is Concentric"
|
||
msgstr ""
|
||
"Line pattern of support interface. Default pattern for non-soluble support "
|
||
"interface is Rectilinear, while default pattern for soluble support "
|
||
"interface is Concentric"
|
||
|
||
msgid "Rectilinear Interlaced"
|
||
msgstr "Rectilinear Interlaced"
|
||
|
||
msgid "Base pattern spacing"
|
||
msgstr "Base pattern spacing"
|
||
|
||
msgid "Spacing between support lines"
|
||
msgstr "Spacing between support lines"
|
||
|
||
msgid "Normal Support expansion"
|
||
msgstr "Normal Support expansion"
|
||
|
||
msgid "Expand (+) or shrink (-) the horizontal span of normal support"
|
||
msgstr "Expand (+) or shrink (-) the horizontal span of normal support"
|
||
|
||
msgid "Speed of support"
|
||
msgstr "Speed of support"
|
||
|
||
msgid ""
|
||
"Style and shape of the support. For normal support, projecting the supports "
|
||
"into a regular grid will create more stable supports (default), while snug "
|
||
"support towers will save material and reduce object scarring.\n"
|
||
"For tree support, slim style will merge branches more aggressively and save "
|
||
"a lot of material, strong style will make larger and stronger support "
|
||
"structure and use more materials, while hybrid style is the combination of "
|
||
"slim tree and normal support with normal nodes under large flat overhangs "
|
||
"(default)."
|
||
msgstr ""
|
||
"Style and shape of the support. For normal support, projecting the supports "
|
||
"into a regular grid will create more stable supports (default), while snug "
|
||
"support towers will save material and reduce object scarring.\n"
|
||
"For tree support, slim style will merge branches more aggressively and save "
|
||
"a lot of material, strong style will make larger and stronger support "
|
||
"structure and use more materials, while hybrid style is the combination of "
|
||
"slim tree and normal support with normal nodes under large flat overhangs "
|
||
"(default)."
|
||
|
||
msgid "Snug"
|
||
msgstr "Snug"
|
||
|
||
msgid "Tree Slim"
|
||
msgstr "Tree Slim"
|
||
|
||
msgid "Tree Strong"
|
||
msgstr "Tree Strong"
|
||
|
||
msgid "Tree Hybrid"
|
||
msgstr "Tree Hybrid"
|
||
|
||
msgid "Tree Organic"
|
||
msgstr "Tree Organic"
|
||
|
||
msgid "Independent support layer height"
|
||
msgstr "Independent support layer height"
|
||
|
||
msgid ""
|
||
"Support layer uses layer height independent with object layer. This is to "
|
||
"support customizing z-gap and save print time.This option will be invalid "
|
||
"when the prime tower is enabled."
|
||
msgstr ""
|
||
"Support layer uses layer height independent with object layer. This is to "
|
||
"support customizing z-gap and save print time.This option will be invalid "
|
||
"when the prime tower is enabled."
|
||
|
||
msgid "Threshold angle"
|
||
msgstr "Threshold angle"
|
||
|
||
msgid ""
|
||
"Support will be generated for overhangs whose slope angle is below the "
|
||
"threshold."
|
||
msgstr ""
|
||
"Support will be generated for overhangs whose slope angle is below the "
|
||
"threshold."
|
||
|
||
msgid "Tree support branch angle"
|
||
msgstr "Tree support branch angle"
|
||
|
||
msgid ""
|
||
"This setting determines the maximum overhang angle that t he branches of "
|
||
"tree support allowed to make.If the angle is increased, the branches can be "
|
||
"printed more horizontally, allowing them to reach farther."
|
||
msgstr ""
|
||
"This setting determines the maximum overhang angle that t he branches of "
|
||
"tree support allowed to make.If the angle is increased, the branches can be "
|
||
"printed more horizontally, allowing them to reach farther."
|
||
|
||
msgid "Tree support branch distance"
|
||
msgstr "Tree support branch distance"
|
||
|
||
msgid ""
|
||
"This setting determines the distance between neighboring tree support nodes."
|
||
msgstr ""
|
||
"This setting determines the distance between neighboring tree support nodes."
|
||
|
||
msgid "Tree support branch diameter"
|
||
msgstr "Tree support branch diameter"
|
||
|
||
msgid "This setting determines the initial diameter of support nodes."
|
||
msgstr "This setting determines the initial diameter of support nodes."
|
||
|
||
msgid "Support wall loops"
|
||
msgstr "Support wall loops"
|
||
|
||
msgid "This setting specifies the count of walls around support"
|
||
msgstr "This setting specifies the count of walls around support"
|
||
|
||
msgid "Chamber temperature"
|
||
msgstr "Chamber temperature"
|
||
|
||
msgid ""
|
||
"Higher chamber temperature can help suppress or reduce warping and "
|
||
"potentially lead to higher interlayer bonding strength for high temperature "
|
||
"materials like ABS, ASA, PC, PA and so on.At the same time, the air "
|
||
"filtration of ABS and ASA will get worse.While for PLA, PETG, TPU, PVA and "
|
||
"other low temperature materials,the actual chamber temperature should not be "
|
||
"high to avoid cloggings, so 0 which stands for turning off is highly "
|
||
"recommended"
|
||
msgstr ""
|
||
"Higher chamber temperature can help suppress or reduce warping and "
|
||
"potentially lead to higher interlayer bonding strength for high temperature "
|
||
"materials like ABS, ASA, PC, PA and so on. At the same time, the air "
|
||
"filtration of ABS and ASA will get worse.While for PLA, PETG, TPU, PVA and "
|
||
"other low temperature materials, the actual chamber temperature should not "
|
||
"be high to avoid clogs, so 0 (turned off) is highly recommended."
|
||
|
||
msgid "Nozzle temperature for layers after the initial one"
|
||
msgstr "Nozzle temperature for layers after the initial one"
|
||
|
||
msgid "Detect thin wall"
|
||
msgstr "Detect thin wall"
|
||
|
||
msgid ""
|
||
"Detect thin wall which can't contain two line width. And use single line to "
|
||
"print. Maybe printed not very well, because it's not closed loop"
|
||
msgstr ""
|
||
"Detect thin wall which can't contain two line width. And use single line to "
|
||
"print. Maybe printed not very well, because it's not closed loop"
|
||
|
||
msgid ""
|
||
"This gcode is inserted when change filament, including T command to trigger "
|
||
"tool change"
|
||
msgstr ""
|
||
"This gcode is inserted when change filament, including T command to trigger "
|
||
"tool change"
|
||
|
||
msgid "Line width for top surfaces"
|
||
msgstr "Line width for top surfaces"
|
||
|
||
msgid "Speed of top surface infill which is solid"
|
||
msgstr "Speed of top surface infill which is solid"
|
||
|
||
msgid "Top shell layers"
|
||
msgstr "Top shell layers"
|
||
|
||
msgid ""
|
||
"This is the number of solid layers of top shell, including the top surface "
|
||
"layer. When the thickness calculated by this value is thinner than top shell "
|
||
"thickness, the top shell layers will be increased"
|
||
msgstr ""
|
||
"This is the number of solid layers of top shell, including the top surface "
|
||
"layer. When the thickness calculated by this value is thinner than the top "
|
||
"shell thickness, the top shell layers will be increased"
|
||
|
||
msgid "Top solid layers"
|
||
msgstr "Top solid layers"
|
||
|
||
msgid "Top shell thickness"
|
||
msgstr "Top shell thickness"
|
||
|
||
msgid ""
|
||
"The number of top solid layers is increased when slicing if the thickness "
|
||
"calculated by top shell layers is thinner than this value. This can avoid "
|
||
"having too thin shell when layer height is small. 0 means that this setting "
|
||
"is disabled and thickness of top shell is absolutely determained by top "
|
||
"shell layers"
|
||
msgstr ""
|
||
"The number of top solid layers is increased when slicing if the thickness "
|
||
"calculated by top shell layers is thinner than this value. This can avoid "
|
||
"having too thin a shell when layer height is small. 0 means that this "
|
||
"setting is disabled and thickness of top shell is determined simply by the "
|
||
"number of top shell layers."
|
||
|
||
msgid "Speed of travel which is faster and without extrusion"
|
||
msgstr "Speed of travel which is faster and without extrusion"
|
||
|
||
msgid "Use relative E distances"
|
||
msgstr "Use relative E distances"
|
||
|
||
msgid ""
|
||
"If your firmware requires relative E values, check this, otherwise leave it "
|
||
"unchecked. Must use relative e distance for QIDI printer"
|
||
msgstr ""
|
||
"If your firmware requires relative E values, check this, otherwise leave it "
|
||
"unchecked. Must use relative e distance for QIDI printer"
|
||
|
||
msgid "Use firmware retraction"
|
||
msgstr "Use firmware retraction"
|
||
|
||
msgid "Convert the retraction moves to G10 and G11 gcode"
|
||
msgstr "Convert the retraction moves to G10 and G11 gcode"
|
||
|
||
msgid "Wipe while retracting"
|
||
msgstr "Wipe while retracting"
|
||
|
||
msgid ""
|
||
"Move nozzle along the last extrusion path when retracting to clean leaked "
|
||
"material on nozzle. This can minimize blob when printing new part after "
|
||
"travel"
|
||
msgstr ""
|
||
"Move nozzle along the last extrusion path when retracting to clean leaked "
|
||
"material on nozzle. This can minimize blobs when printing new parts after "
|
||
"traveling."
|
||
|
||
msgid "Wipe Distance"
|
||
msgstr "Wipe Distance"
|
||
|
||
msgid ""
|
||
"Describe how long the nozzle will move along the last path when retracting"
|
||
msgstr ""
|
||
"Describe how long the nozzle will move along the last path when retracting"
|
||
|
||
msgid ""
|
||
"The wiping tower can be used to clean up the residue on the nozzle and "
|
||
"stabilize the chamber pressure inside the nozzle, in order to avoid "
|
||
"appearance defects when printing objects."
|
||
msgstr ""
|
||
"The wiping tower can be used to clean up the residue on the nozzle and "
|
||
"stabilize the chamber pressure inside the nozzle, in order to avoid "
|
||
"appearance defects when printing objects."
|
||
|
||
msgid "Purging volumes"
|
||
msgstr "Purging volumes"
|
||
|
||
msgid "Flush multiplier"
|
||
msgstr "Flush multiplier"
|
||
|
||
msgid ""
|
||
"The actual flushing volumes is equal to the flush multiplier multiplied by "
|
||
"the flushing volumes in the table."
|
||
msgstr ""
|
||
"The actual flushing volumes is equal to the flush multiplier multiplied by "
|
||
"the flushing volumes in the table."
|
||
|
||
msgid "Prime volume"
|
||
msgstr "Prime volume"
|
||
|
||
msgid "The volume of material to prime extruder on tower."
|
||
msgstr "The volume of material to prime extruder on tower."
|
||
|
||
msgid "Width of prime tower"
|
||
msgstr "Width of prime tower"
|
||
|
||
msgid ""
|
||
"Purging after filament change will be done inside objects' infills. This may "
|
||
"lower the amount of waste and decrease the print time. If the walls are "
|
||
"printed with transparent filament, the mixed color infill will be seen "
|
||
"outside. It will not take effect, unless the prime tower is enabled."
|
||
msgstr ""
|
||
"Purging after filament change will be done inside objects' infills. This may "
|
||
"lower the amount of waste and decrease the print time. If the walls are "
|
||
"printed with transparent filament, the mixed color infill will be seen "
|
||
"outside. It will not take effect, unless the prime tower is enabled."
|
||
|
||
msgid ""
|
||
"Purging after filament change will be done inside objects' support. This may "
|
||
"lower the amount of waste and decrease the print time. It will not take "
|
||
"effect, unless the prime tower is enabled."
|
||
msgstr ""
|
||
"Purging after filament change will be done inside objects' support. This may "
|
||
"lower the amount of waste and decrease the print time. It will not take "
|
||
"effect, unless the prime tower is enabled."
|
||
|
||
msgid ""
|
||
"This object will be used to purge the nozzle after a filament change to save "
|
||
"filament and decrease the print time. Colours of the objects will be mixed "
|
||
"as a result. It will not take effect, unless the prime tower is enabled."
|
||
msgstr ""
|
||
"This object will be used to purge the nozzle after a filament change to save "
|
||
"filament and decrease the print time. Colours of the objects will be mixed "
|
||
"as a result. It will not take effect, unless the prime tower is enabled."
|
||
|
||
msgid "X-Y hole compensation"
|
||
msgstr "X-Y hole compensation"
|
||
|
||
msgid ""
|
||
"Holes of object will be grown or shrunk in XY plane by the configured value. "
|
||
"Positive value makes holes bigger. Negative value makes holes smaller. This "
|
||
"function is used to adjust size slightly when the object has assembling issue"
|
||
msgstr ""
|
||
"Holes of object will be grown or shrunk in XY plane by the configured value. "
|
||
"Positive value makes holes bigger. Negative value makes holes smaller. This "
|
||
"function is used to adjust size slightly when the object has assembling issue"
|
||
|
||
msgid "X-Y contour compensation"
|
||
msgstr "X-Y contour compensation"
|
||
|
||
msgid ""
|
||
"Contour of object will be grown or shrunk in XY plane by the configured "
|
||
"value. Positive value makes contour bigger. Negative value makes contour "
|
||
"smaller. This function is used to adjust size slightly when the object has "
|
||
"assembling issue"
|
||
msgstr ""
|
||
"Contour of object will be grown or shrunk in XY plane by the configured "
|
||
"value. Positive value makes contour bigger. Negative value makes contour "
|
||
"smaller. This function is used to adjust size slightly when the object has "
|
||
"assembling issue"
|
||
|
||
msgid ""
|
||
"Classic wall generator produces walls with constant extrusion width and for "
|
||
"very thin areas is used gap-fill. Arachne engine produces walls with "
|
||
"variable extrusion width"
|
||
msgstr ""
|
||
"Classic wall generator produces walls with constant extrusion width and for "
|
||
"very thin areas is used gap-fill. Arachne engine produces walls with "
|
||
"variable extrusion width"
|
||
|
||
msgid "Classic"
|
||
msgstr "Classic"
|
||
|
||
msgid "Arachne"
|
||
msgstr "Arachne"
|
||
|
||
msgid "Wall transition length"
|
||
msgstr "Wall transition length"
|
||
|
||
msgid ""
|
||
"When transitioning between different numbers of walls as the part becomes "
|
||
"thinner, a certain amount of space is allotted to split or join the wall "
|
||
"segments. It's expressed as a percentage over nozzle diameter"
|
||
msgstr ""
|
||
"When transitioning between different numbers of walls as the part becomes "
|
||
"thinner, a certain amount of space is allotted to split or join the wall "
|
||
"segments. It's expressed as a percentage over nozzle diameter"
|
||
|
||
msgid "Wall transitioning filter margin"
|
||
msgstr "Wall transitioning filter margin"
|
||
|
||
msgid ""
|
||
"Prevent transitioning back and forth between one extra wall and one less. "
|
||
"This margin extends the range of extrusion widths which follow to [Minimum "
|
||
"wall width - margin, 2 * Minimum wall width + margin]. Increasing this "
|
||
"margin reduces the number of transitions, which reduces the number of "
|
||
"extrusion starts/stops and travel time. However, large extrusion width "
|
||
"variation can lead to under- or overextrusion problems. It's expressed as a "
|
||
"percentage over nozzle diameter"
|
||
msgstr ""
|
||
"Prevent transitioning back and forth between one extra wall and one less. "
|
||
"This margin extends the range of extrusion widths which follow to [Minimum "
|
||
"wall width - margin, 2 * Minimum wall width + margin]. Increasing this "
|
||
"margin reduces the number of transitions, which reduces the number of "
|
||
"extrusion starts/stops and travel time. However, large extrusion width "
|
||
"variation can lead to under- or overextrusion problems. It's expressed as a "
|
||
"percentage over nozzle diameter"
|
||
|
||
msgid "Wall transitioning threshold angle"
|
||
msgstr "Wall transitioning threshold angle"
|
||
|
||
msgid ""
|
||
"When to create transitions between even and odd numbers of walls. A wedge "
|
||
"shape with an angle greater than this setting will not have transitions and "
|
||
"no walls will be printed in the center to fill the remaining space. Reducing "
|
||
"this setting reduces the number and length of these center walls, but may "
|
||
"leave gaps or overextrude"
|
||
msgstr ""
|
||
"When to create transitions between even and odd numbers of walls. A wedge "
|
||
"shape with an angle greater than this setting will not have transitions and "
|
||
"no walls will be printed in the center to fill the remaining space. Reducing "
|
||
"this setting reduces the number and length of these center walls, but may "
|
||
"leave gaps or overextrude"
|
||
|
||
msgid "Wall distribution count"
|
||
msgstr "Wall distribution count"
|
||
|
||
msgid ""
|
||
"The number of walls, counted from the center, over which the variation needs "
|
||
"to be spread. Lower values mean that the outer walls don't change in width"
|
||
msgstr ""
|
||
"The number of walls, counted from the center, over which the variation needs "
|
||
"to be spread. Lower values mean that the outer walls don't change in width"
|
||
|
||
msgid "Minimum feature size"
|
||
msgstr "Minimum feature size"
|
||
|
||
msgid ""
|
||
"Minimum thickness of thin features. Model features that are thinner than "
|
||
"this value will not be printed, while features thicker than the Minimum "
|
||
"feature size will be widened to the Minimum wall width. It's expressed as a "
|
||
"percentage over nozzle diameter"
|
||
msgstr ""
|
||
"Minimum thickness of thin features. Model features that are thinner than "
|
||
"this value will not be printed, while features thicker than the Minimum "
|
||
"feature size will be widened to the Minimum wall width. It's expressed as a "
|
||
"percentage over nozzle diameter"
|
||
|
||
msgid "Minimum wall width"
|
||
msgstr "Minimum wall width"
|
||
|
||
msgid ""
|
||
"Width of the wall that will replace thin features (according to the Minimum "
|
||
"feature size) of the model. If the Minimum wall width is thinner than the "
|
||
"thickness of the feature, the wall will become as thick as the feature "
|
||
"itself. It's expressed as a percentage over nozzle diameter"
|
||
msgstr ""
|
||
"Width of the wall that will replace thin features (according to the Minimum "
|
||
"feature size) of the model. If the Minimum wall width is thinner than the "
|
||
"thickness of the feature, the wall will become as thick as the feature "
|
||
"itself. It's expressed as a percentage over nozzle diameter"
|
||
|
||
msgid "Detect narrow internal solid infill"
|
||
msgstr "Detect narrow internal solid infill"
|
||
|
||
msgid ""
|
||
"This option will auto detect narrow internal solid infill area. If enabled, "
|
||
"concentric pattern will be used for the area to speed printing up. "
|
||
"Otherwise, rectilinear pattern is used defaultly."
|
||
msgstr ""
|
||
"This option will auto detect narrow internal solid infill area. If enabled, "
|
||
"concentric pattern will be used for the area to speed printing up. "
|
||
"Otherwise, rectilinear pattern is used defaultly."
|
||
|
||
msgid "invalid value "
|
||
msgstr "invalid value "
|
||
|
||
msgid ""
|
||
"--use-firmware-retraction is only supported by Marlin, Klipper, Smoothie, "
|
||
"RepRapFirmware, Repetier and Machinekit firmware"
|
||
msgstr ""
|
||
"--use-firmware-retraction is only supported by Marlin, Klipper, Smoothie, "
|
||
"RepRapFirmware, Repetier and Machinekit firmware"
|
||
|
||
msgid "--use-firmware-retraction is not compatible with --wipe"
|
||
msgstr "--use-firmware-retraction is not compatible with --wipe"
|
||
|
||
#, c-format, boost-format
|
||
msgid " doesn't work at 100%% density "
|
||
msgstr " doesn't work at 100%% density "
|
||
|
||
msgid "Invalid value when spiral vase mode is enabled: "
|
||
msgstr "Invalid value when spiral vase mode is enabled: "
|
||
|
||
msgid "too large line width "
|
||
msgstr "too large line width "
|
||
|
||
msgid " not in range "
|
||
msgstr " not in range "
|
||
|
||
msgid "No check"
|
||
msgstr "No check"
|
||
|
||
msgid "Do not run any validity checks, such as gcode path conflicts check."
|
||
msgstr "Do not run any validity checks, such as gcode path conflicts check."
|
||
|
||
msgid "Error in zip archive"
|
||
msgstr "Error in zip archive"
|
||
|
||
msgid "Generating walls"
|
||
msgstr "Generating walls"
|
||
|
||
msgid "Generating infill regions"
|
||
msgstr "Generating infill regions"
|
||
|
||
msgid "Generating infill toolpath"
|
||
msgstr "Generating infill toolpath"
|
||
|
||
msgid "Detect overhangs for auto-lift"
|
||
msgstr "Detect overhangs for auto-lift"
|
||
|
||
msgid "Checking support necessity"
|
||
msgstr "Checking support necessity"
|
||
|
||
msgid "floating regions"
|
||
msgstr "floating regions"
|
||
|
||
msgid "floating cantilever"
|
||
msgstr "floating cantilever"
|
||
|
||
msgid "large overhangs"
|
||
msgstr "large overhangs"
|
||
|
||
#, c-format, boost-format
|
||
msgid ""
|
||
"It seems object %s has %s. Please re-orient the object or enable support "
|
||
"generation."
|
||
msgstr ""
|
||
"It seems object %s has %s. Please re-orient the object or enable support "
|
||
"generation."
|
||
|
||
msgid "Generating support"
|
||
msgstr "Generating support"
|
||
|
||
msgid "Optimizing toolpath"
|
||
msgstr "Optimizing toolpath"
|
||
|
||
msgid "Empty layers around bottom are replaced by nearest normal layers."
|
||
msgstr "Empty layers around bottom are replaced by nearest normal layers."
|
||
|
||
msgid "The model has too many empty layers."
|
||
msgstr "The model has too many empty layers."
|
||
|
||
msgid "Slicing mesh"
|
||
msgstr "Slicing mesh"
|
||
|
||
msgid ""
|
||
"No layers were detected. You might want to repair your STL file(s) or check "
|
||
"their size or thickness and retry.\n"
|
||
msgstr ""
|
||
"No layers were detected. You might want to repair your STL file(s) or check "
|
||
"their size or thickness and retry.\n"
|
||
|
||
msgid ""
|
||
"An object's XY size compensation will not be used because it is also color-"
|
||
"painted.\n"
|
||
"XY Size compensation can not be combined with color-painting."
|
||
msgstr ""
|
||
"An object's XY size compensation will not be used because it is also color-"
|
||
"painted.\n"
|
||
"XY Size compensation can not be combined with color-painting."
|
||
|
||
msgid ""
|
||
"Unknown file format. Input file must have .stl, .obj, .amf(.xml) extension."
|
||
msgstr ""
|
||
"Unknown file format. Input file must have .stl, .obj, .amf(.xml) extension."
|
||
|
||
msgid "Loading of a model file failed."
|
||
msgstr "Loading of a model file failed."
|
||
|
||
msgid "The supplied file couldn't be read because it's empty"
|
||
msgstr "The supplied file couldn't be read because it's empty"
|
||
|
||
msgid "Unknown file format. Input file must have .3mf or .zip.amf extension."
|
||
msgstr "Unknown file format: input file must have .3mf or .zip.amf extension."
|
||
|
||
msgid "Canceled"
|
||
msgstr "Canceled"
|
||
|
||
msgid "load_obj: failed to parse"
|
||
msgstr "load_obj: failed to parse"
|
||
|
||
msgid "load mtl in obj: failed to parse"
|
||
msgstr "load mtl in obj: failed to parse"
|
||
|
||
msgid "The file contains polygons with more than 4 vertices."
|
||
msgstr "The file contains polygons with more than 4 vertices."
|
||
|
||
msgid "The file contains polygons with less than 2 vertices."
|
||
msgstr "The file contains polygons with less than 2 vertices."
|
||
|
||
msgid "The file contains invalid vertex index."
|
||
msgstr "The file contains invalid vertex index."
|
||
|
||
msgid "This OBJ file couldn't be read because it's empty."
|
||
msgstr "This OBJ file couldn't be read because it's empty."
|
||
|
||
msgid "Flow Rate Calibration"
|
||
msgstr "Flow Rate Calibration"
|
||
|
||
msgid "Max Volumetric Speed Calibration"
|
||
msgstr "Max Volumetric Speed Calibration"
|
||
|
||
msgid "Manage Result"
|
||
msgstr "Manage Result"
|
||
|
||
msgid "Manual Calibration"
|
||
msgstr "Manual Calibration"
|
||
|
||
msgid "Result can be read by human eyes."
|
||
msgstr "Result can be read by human eyes."
|
||
|
||
msgid "Auto-Calibration"
|
||
msgstr "Auto-Calibration"
|
||
|
||
msgid "We would use Lidar to read the calibration result"
|
||
msgstr "We would use Lidar to read the calibration result"
|
||
|
||
msgid "Prev"
|
||
msgstr "Prev"
|
||
|
||
msgid "Recalibration"
|
||
msgstr "Recalibration"
|
||
|
||
msgid "Calibrate"
|
||
msgstr "Calibrate"
|
||
|
||
msgid "Finish"
|
||
msgstr "Finish"
|
||
|
||
msgid "How to use calibration result?"
|
||
msgstr "How can I use calibration results?"
|
||
|
||
msgid ""
|
||
"You could change the Flow Dynamics Calibration Factor in material editing"
|
||
msgstr ""
|
||
"You could change the Flow Dynamics Calibration Factor in material editing"
|
||
|
||
msgid ""
|
||
"The current firmware version of the printer does not support calibration.\n"
|
||
"Please upgrade the printer firmware."
|
||
msgstr ""
|
||
"The current firmware version of the printer does not support calibration.\n"
|
||
"Please upgrade the printer firmware."
|
||
|
||
msgid "Calibration not supported"
|
||
msgstr "Calibration not supported"
|
||
|
||
msgid "Error desc"
|
||
msgstr "Error desc"
|
||
|
||
msgid "Extra info"
|
||
msgstr "Extra info"
|
||
|
||
msgid "Flow Dynamics"
|
||
msgstr "Flow Dynamics"
|
||
|
||
msgid "Flow Rate"
|
||
msgstr "Flow Rate"
|
||
|
||
msgid "Max Volumetric Speed"
|
||
msgstr "Max Volumetric Speed"
|
||
|
||
#, c-format, boost-format
|
||
msgid ""
|
||
"Please input valid values:\n"
|
||
"Start value: >= %.1f\n"
|
||
"End value: <= %.1f\n"
|
||
"End value: > Start value\n"
|
||
"Value step: >= %.3f)"
|
||
msgstr ""
|
||
"Please input valid values:\n"
|
||
"Start value: >= %.1f\n"
|
||
"End value: <= %.1f\n"
|
||
"End value: > Start value\n"
|
||
"Value step: >= %.3f)"
|
||
|
||
msgid "The name cannot be empty."
|
||
msgstr "The name cannot be empty."
|
||
|
||
#, c-format, boost-format
|
||
msgid "The selected preset: %s is not found."
|
||
msgstr "The selected preset: %s is not found."
|
||
|
||
msgid "The name cannot be the same as the system preset name."
|
||
msgstr "The name cannot be the same as the system preset name."
|
||
|
||
msgid "The name is the same as another existing preset name"
|
||
msgstr "The name is the same as another existing preset name"
|
||
|
||
msgid "create new preset failed."
|
||
msgstr "create new preset failed."
|
||
|
||
msgid ""
|
||
"Are you sure to cancel the current calibration and return to the home page?"
|
||
msgstr ""
|
||
"Are you sure to cancel the current calibration and return to the home page?"
|
||
|
||
msgid "No Printer Connected!"
|
||
msgstr "No Printer Connected!"
|
||
|
||
msgid "Printer is not connected yet."
|
||
msgstr "Printer is not connected yet."
|
||
|
||
msgid "Please select filament to calibrate."
|
||
msgstr "Please select filament to calibrate."
|
||
|
||
msgid "The input value size must be 3."
|
||
msgstr "The input value size must be 3."
|
||
|
||
msgid ""
|
||
"This machine type can only hold 16 history results per nozzle. You can "
|
||
"delete the existing historical results and then start calibration. Or you "
|
||
"can continue the calibration, but you cannot create new calibration "
|
||
"historical results. \n"
|
||
"Do you still want to continue the calibration?"
|
||
msgstr ""
|
||
"This machine type can only hold 16 historical results per nozzle. You can "
|
||
"delete the existing historical results and then start calibration. Or you "
|
||
"can continue the calibration, but you cannot create new calibration "
|
||
"historical results. \n"
|
||
"Do you still want to continue the calibration?"
|
||
|
||
msgid "Connecting to printer..."
|
||
msgstr "Connecting to printer..."
|
||
|
||
msgid "The failed test result has been dropped."
|
||
msgstr "The failed test result has been dropped."
|
||
|
||
msgid "Flow Dynamics Calibration result has been saved to the printer"
|
||
msgstr "Flow Dynamics Calibration result has been saved to the printer"
|
||
|
||
#, c-format, boost-format
|
||
msgid ""
|
||
"There is already a historical calibration result with the same name: %s. "
|
||
"Only one of the results with the same name is saved. Are you sure you want "
|
||
"to override the historical result?"
|
||
msgstr ""
|
||
"There is already a previous calibration result with the same name: %s. Only "
|
||
"one result with a name is saved. Are you sure you want to overwrite the "
|
||
"previous result?"
|
||
|
||
#, c-format, boost-format
|
||
msgid ""
|
||
"This machine type can only hold %d history results per nozzle. This result "
|
||
"will not be saved."
|
||
msgstr ""
|
||
"This machine type can only hold %d historical results per nozzle. This "
|
||
"result will not be saved."
|
||
|
||
msgid "Internal Error"
|
||
msgstr "Internal Error"
|
||
|
||
msgid "Please select at least one filament for calibration"
|
||
msgstr "Please select at least one filament for calibration"
|
||
|
||
msgid "Flow rate calibration result has been saved to preset"
|
||
msgstr "Flow rate calibration result has been saved to preset"
|
||
|
||
msgid "Max volumetric speed calibration result has been saved to preset"
|
||
msgstr "Max volumetric speed calibration result has been saved to preset"
|
||
|
||
msgid "When do you need Flow Dynamics Calibration"
|
||
msgstr "When do you need Flow Dynamics Calibration"
|
||
|
||
msgid ""
|
||
"We now have added the auto-calibration for different filaments, which is "
|
||
"fully automated and the result will be saved into the printer for future "
|
||
"use. You only need to do the calibration in the following limited cases:\n"
|
||
"1. If you introduce a new filament of different brands/models or the "
|
||
"filament is damp;\n"
|
||
"2. if the nozzle is worn out or replaced with a new one;\n"
|
||
"3. If the max volumetric speed or print temperature is changed in the "
|
||
"filament setting."
|
||
msgstr ""
|
||
"We now have added the auto-calibration for different filaments, which is "
|
||
"fully automated and the result will be saved into the printer for future "
|
||
"use. You only need to do the calibration in the following limited cases:\n"
|
||
"1. If you introduce a new filament of different brands/models or the "
|
||
"filament is damp;\n"
|
||
"2. if the nozzle is worn out or replaced with a new one;\n"
|
||
"3. If the max volumetric speed or print temperature is changed in the "
|
||
"filament setting."
|
||
|
||
msgid "About this calibration"
|
||
msgstr "About this calibration"
|
||
|
||
msgid ""
|
||
"Please find the details of Flow Dynamics Calibration from our wiki.\n"
|
||
"\n"
|
||
"Usually the calibration is unnecessary. When you start a single color/"
|
||
"material print, with the \"flow dynamics calibration\" option checked in the "
|
||
"print start menu, the printer will follow the old way, calibrate the "
|
||
"filament before the print; When you start a multi color/material print, the "
|
||
"printer will use the default compensation parameter for the filament during "
|
||
"every filament switch which will have a good result in most cases.\n"
|
||
"\n"
|
||
"Please note that there are a few cases that can make the calibration results "
|
||
"unreliable, such as insufficient adhesion on the build plate. Improving "
|
||
"adhesion can be achieved by washing the build plate or applying glue. For "
|
||
"more information on this topic, please refer to our Wiki.\n"
|
||
"\n"
|
||
"The calibration results have about 10 percent jitter in our test, which may "
|
||
"cause the result not exactly the same in each calibration. We are still "
|
||
"investigating the root cause to do improvements with new updates."
|
||
msgstr ""
|
||
|
||
msgid "When to use Flow Rate Calibration"
|
||
msgstr "When to use Flow Rate Calibration"
|
||
|
||
msgid ""
|
||
"After using Flow Dynamics Calibration, there might still be some extrusion "
|
||
"issues, such as:\n"
|
||
"1. Over-Extrusion: Excess material on your printed object, forming blobs or "
|
||
"zits, or the layers seem thicker than expected and not uniform.\n"
|
||
"2. Under-Extrusion: Very thin layers, weak infill strength, or gaps in the "
|
||
"top layer of the model, even when printing slowly.\n"
|
||
"3. Poor Surface Quality: The surface of your prints seems rough or uneven.\n"
|
||
"4. Weak Structural Integrity: Prints break easily or don't seem as sturdy as "
|
||
"they should be."
|
||
msgstr ""
|
||
"After using Flow Dynamics Calibration, there might still be some extrusion "
|
||
"issues, such as:\n"
|
||
"1. Over-Extrusion: Excess material on your printed object, forming blobs or "
|
||
"zits, or the layers seem thicker than expected and not uniform.\n"
|
||
"2. Under-Extrusion: Very thin layers, weak infill strength, or gaps in the "
|
||
"top layer of the model, even when printing slowly.\n"
|
||
"3. Poor Surface Quality: The surface of your prints seems rough or uneven.\n"
|
||
"4. Weak Structural Integrity: Prints break easily or don't seem as sturdy as "
|
||
"they should be."
|
||
|
||
msgid ""
|
||
"In addition, Flow Rate Calibration is crucial for foaming materials like LW-"
|
||
"PLA used in RC planes. These materials expand greatly when heated, and "
|
||
"calibration provides a useful reference flow rate."
|
||
msgstr ""
|
||
"In addition, Flow Rate Calibration is crucial for foaming materials like LW-"
|
||
"PLA used in RC planes. These materials expand greatly when heated, and "
|
||
"calibration provides a useful reference flow rate."
|
||
|
||
msgid ""
|
||
"Flow Rate Calibration measures the ratio of expected to actual extrusion "
|
||
"volumes. The default setting works well in QIDI Lab printers and official "
|
||
"filaments as they were pre-calibrated and fine-tuned. For a regular "
|
||
"filament, you usually won't need to perform a Flow Rate Calibration unless "
|
||
"you still see the listed defects after you have done other calibrations. For "
|
||
"more details, please check out the wiki article."
|
||
msgstr ""
|
||
"Flow Rate Calibration measures the ratio of expected to actual extrusion "
|
||
"volumes. The default setting works well in QIDI Lab printers and official "
|
||
"filaments as they were pre-calibrated and fine-tuned. For a regular "
|
||
"filament, you usually won't need to perform a Flow Rate Calibration unless "
|
||
"you still see the listed defects after you have done other calibrations. For "
|
||
"more details, please check out the wiki article."
|
||
|
||
msgid ""
|
||
"Auto Flow Rate Calibration utilizes QIDI Lab's Micro-Lidar technology, "
|
||
"directly measuring the calibration patterns. However, please be advised that "
|
||
"the efficacy and accuracy of this method may be compromised with specific "
|
||
"types of materials. Particularly, filaments that are transparent or semi-"
|
||
"transparent, sparkling-particled, or have a high-reflective finish may not "
|
||
"be suitable for this calibration and can produce less-than-desirable "
|
||
"results.\n"
|
||
"\n"
|
||
"The calibration results may vary between each calibration or filament. We "
|
||
"are still improving the accuracy and compatibility of this calibration "
|
||
"through firmware updates over time.\n"
|
||
"\n"
|
||
"Caution: Flow Rate Calibration is an advanced process, to be attempted only "
|
||
"by those who fully understand its purpose and implications. Incorrect usage "
|
||
"can lead to sub-par prints or printer damage. Please make sure to carefully "
|
||
"read and understand the process before doing it."
|
||
msgstr ""
|
||
"Auto Flow Rate Calibration utilizes QIDI Lab's Micro-Lidar technology, "
|
||
"directly measuring the calibration patterns. However, please be advised that "
|
||
"the efficacy and accuracy of this method may be compromised with specific "
|
||
"types of materials. Particularly, filaments that are transparent or semi-"
|
||
"transparent, have sparkles, or have a highly-reflective finish may not be "
|
||
"suitable for this calibration and can produce less-than-desirable results.\n"
|
||
"\n"
|
||
"The calibration results may vary between each calibration or filament. We "
|
||
"are still improving the accuracy and compatibility of this calibration "
|
||
"through firmware updates over time.\n"
|
||
"\n"
|
||
"Caution: Flow Rate Calibration is an advanced process, to be attempted only "
|
||
"by those who fully understand its purpose and implications. Incorrect usage "
|
||
"can lead to sub-par prints or printer damage. Please make sure to carefully "
|
||
"read and understand the process before doing it."
|
||
|
||
msgid "When you need Max Volumetric Speed Calibration"
|
||
msgstr "When you need Max Volumetric Speed Calibration"
|
||
|
||
msgid "Over-extrusion or under extrusion"
|
||
msgstr "Over-extrusion or under extrusion"
|
||
|
||
msgid "Max Volumetric Speed calibration is recommended when you print with:"
|
||
msgstr "Max Volumetric Speed calibration is recommended when you print with:"
|
||
|
||
msgid "material with significant thermal shrinkage/expansion, such as..."
|
||
msgstr "material with significant thermal shrinkage/expansion, such as..."
|
||
|
||
msgid "materials with inaccurate filament diameter"
|
||
msgstr "materials with inaccurate filament diameter"
|
||
|
||
msgid "We found the best Flow Dynamics Calibration Factor"
|
||
msgstr "We found the best Flow Dynamics Calibration Factor"
|
||
|
||
msgid ""
|
||
"Part of the calibration failed! You may clean the plate and retry. The "
|
||
"failed test result would be dropped."
|
||
msgstr ""
|
||
"Part of the calibration failed! You may clean the plate and retry. The "
|
||
"failed test result would be dropped."
|
||
|
||
msgid ""
|
||
"*We recommend you to add brand, material, type, and even humidity level in "
|
||
"the Name"
|
||
msgstr ""
|
||
|
||
msgid "Failed"
|
||
msgstr "Failed"
|
||
|
||
msgid "Please enter the name you want to save to printer."
|
||
msgstr "Please enter the name you want to save to printer."
|
||
|
||
msgid "The name cannot exceed 40 characters."
|
||
msgstr "The name cannot exceed 40 characters."
|
||
|
||
msgid ""
|
||
"Only one of the results with the same name will be saved. Are you sure you "
|
||
"want to override the other results?"
|
||
msgstr ""
|
||
"Only one of the results with the same name will be saved. Are you sure you "
|
||
"want to replace the other results?"
|
||
|
||
msgid "Please find the best line on your plate"
|
||
msgstr "Please find the best line on your plate"
|
||
|
||
msgid "Please find the corner with perfect degree of extrusion"
|
||
msgstr "Please find the corner with the perfect degree of extrusion"
|
||
|
||
msgid "Input Value"
|
||
msgstr "Input Value"
|
||
|
||
msgid "Save to Filament Preset"
|
||
msgstr "Save to Filament Preset"
|
||
|
||
msgid "Preset"
|
||
msgstr "Preset"
|
||
|
||
msgid "Record Factor"
|
||
msgstr "Record Factor"
|
||
|
||
msgid "We found the best flow ratio for you"
|
||
msgstr "We found the best flow ratio for you"
|
||
|
||
msgid "Flow Ratio"
|
||
msgstr "Flow Ratio"
|
||
|
||
msgid "Please input a valid value (0.0 < flow ratio < 2.0)"
|
||
msgstr "Please input a valid value (0.0 < flow ratio < 2.0)"
|
||
|
||
msgid "Please enter the name of the preset you want to save."
|
||
msgstr "Please enter the name of the preset you want to save."
|
||
|
||
msgid "Calibration1"
|
||
msgstr "Calibration1"
|
||
|
||
msgid "Calibration2"
|
||
msgstr "Calibration2"
|
||
|
||
msgid "Please find the best object on your plate"
|
||
msgstr "Please find the best object on your plate"
|
||
|
||
msgid "Fill in the value above the block with smoothest top surface"
|
||
msgstr "Fill in the value above the block with smoothest top surface"
|
||
|
||
msgid "Skip Calibration2"
|
||
msgstr "Skip Calibration2"
|
||
|
||
#, c-format, boost-format
|
||
msgid "flow ratio : %s "
|
||
msgstr "flow ratio : %s "
|
||
|
||
msgid "Please choose a block with smoothest top surface"
|
||
msgstr "Please choose a block with smoothest top surface"
|
||
|
||
msgid "Please choose a block with smoothest top surface."
|
||
msgstr "Please choose a block with smoothest top surface."
|
||
|
||
msgid "Please input a valid value (0 <= Max Volumetric Speed <= 60)"
|
||
msgstr "Please input a valid value (0 <= Max Volumetric Speed <= 60)"
|
||
|
||
msgid "Calibration Type"
|
||
msgstr "Calibration Type"
|
||
|
||
msgid "Complete Calibration"
|
||
msgstr "Complete Calibration"
|
||
|
||
msgid "Fine Calibration based on flow ratio"
|
||
msgstr "Fine Calibration based on flow ratio"
|
||
|
||
msgid "Title"
|
||
msgstr "Title"
|
||
|
||
msgid ""
|
||
"A test model will be printed. Please clear the build plate and place it back "
|
||
"to the hot bed before calibration."
|
||
msgstr ""
|
||
"A test model will be printed. Please clear the build plate and place it back "
|
||
"to the hot bed before calibration."
|
||
|
||
msgid "Printing Parameters"
|
||
msgstr "Printing Parameters"
|
||
|
||
msgid "Plate Type"
|
||
msgstr "Plate Type"
|
||
|
||
msgid "filament position"
|
||
msgstr "filament position"
|
||
|
||
msgid "External Spool"
|
||
msgstr "External Spool"
|
||
|
||
msgid "Filament For Calibration"
|
||
msgstr "Filament For Calibration"
|
||
|
||
msgid ""
|
||
"Tips for calibration material: \n"
|
||
"- Materials that can share same hot bed temperature\n"
|
||
"- Different filament brand and family(Brand = QIDI, Family = Basic, Matte)"
|
||
msgstr ""
|
||
"Tips for calibration material: \n"
|
||
"- Materials that can share same hot bed temperature\n"
|
||
"- Different filament brand and family(Brand = QIDI, Family = Basic, Matte)"
|
||
|
||
msgid "Pattern"
|
||
msgstr "Pattern"
|
||
|
||
msgid "Method"
|
||
msgstr "Method"
|
||
|
||
#, c-format, boost-format
|
||
msgid "%s is not compatible with %s"
|
||
msgstr "%s is not compatible with %s"
|
||
|
||
msgid "TPU is not supported for Flow Dynamics Auto-Calibration."
|
||
msgstr "TPU is not supported for Flow Dynamics Auto-Calibration."
|
||
|
||
msgid "Connecting to printer"
|
||
msgstr "Connecting to printer"
|
||
|
||
msgid "From k Value"
|
||
msgstr "From k Value"
|
||
|
||
msgid "To k Value"
|
||
msgstr "To k Value"
|
||
|
||
msgid "Value step"
|
||
msgstr "Value step"
|
||
|
||
msgid "The nozzle diameter has been synchronized from the printer Settings"
|
||
msgstr "The nozzle diameter has been synchronized from the printer Settings"
|
||
|
||
msgid "From Volumetric Speed"
|
||
msgstr "From Volumetric Speed"
|
||
|
||
msgid "To Volumetric Speed"
|
||
msgstr "To Volumetric Speed"
|
||
|
||
msgid "Flow Dynamics Calibration Result"
|
||
msgstr "Flow Dynamics Calibration Result"
|
||
|
||
msgid "New"
|
||
msgstr "New"
|
||
|
||
msgid "No History Result"
|
||
msgstr "No History Result"
|
||
|
||
msgid "Success to get history result"
|
||
msgstr "Success to get history result"
|
||
|
||
msgid "Refreshing the historical Flow Dynamics Calibration records"
|
||
msgstr "Refreshing the previous Flow Dynamics Calibration records"
|
||
|
||
msgid "Action"
|
||
msgstr "Action"
|
||
|
||
#, c-format, boost-format
|
||
msgid "This machine type can only hold %d history results per nozzle."
|
||
msgstr "This machine type can only hold %d historical results per nozzle."
|
||
|
||
msgid "Edit Flow Dynamics Calibration"
|
||
msgstr "Edit Flow Dynamics Calibration"
|
||
|
||
msgid "New Flow Dynamic Calibration"
|
||
msgstr "New Flow Dynamic Calibration"
|
||
|
||
msgid "Ok"
|
||
msgstr "Ok"
|
||
|
||
msgid "The filament must be selected."
|
||
msgstr "The filament must be selected."
|
||
|
||
msgid "PA Calibration"
|
||
msgstr "PA Calibration"
|
||
|
||
msgid "PA Tower"
|
||
msgstr "PA Tower"
|
||
|
||
msgid "PA Line"
|
||
msgstr "PA Line"
|
||
|
||
msgid "PA Pattern"
|
||
msgstr "PA Pattern"
|
||
|
||
msgid "Start PA: "
|
||
msgstr "Start PA: "
|
||
|
||
msgid "End PA: "
|
||
msgstr "End PA: "
|
||
|
||
msgid "PA step: "
|
||
msgstr "PA step: "
|
||
|
||
msgid "Print numbers"
|
||
msgstr "Print numbers"
|
||
|
||
msgid ""
|
||
"Please input valid values:\n"
|
||
"Start PA: >= 0.0\n"
|
||
"End PA: > Start PA\n"
|
||
"PA step: >= 0.001)"
|
||
msgstr ""
|
||
"Please input valid values:\n"
|
||
"Start PA: >= 0.0\n"
|
||
"End PA: > Start PA\n"
|
||
"PA step: >= 0.001)"
|
||
|
||
msgid "Temperature calibration"
|
||
msgstr "Temperature calibration"
|
||
|
||
msgid "Filament type"
|
||
msgstr "Filament type"
|
||
|
||
msgid "Start temp: "
|
||
msgstr "Start temp: "
|
||
|
||
msgid "End temp: "
|
||
msgstr "End temp: "
|
||
|
||
msgid "Temp step: "
|
||
msgstr "Temp step: "
|
||
|
||
msgid "Supported range: 180°C - 350°C"
|
||
msgstr "Supported range: 180°C - 350°C"
|
||
|
||
msgid ""
|
||
"Please input valid values:\n"
|
||
"Start temp: <= 350\n"
|
||
"End temp: >= 180\n"
|
||
"Start temp > End temp + 5)"
|
||
msgstr ""
|
||
"Please input valid values:\n"
|
||
"Start temp: <= 350\n"
|
||
"End temp: >= 180\n"
|
||
"Start temp > End temp + 5)"
|
||
|
||
msgid "Max volumetric speed test"
|
||
msgstr "Max volumetric speed test"
|
||
|
||
msgid "Start volumetric speed: "
|
||
msgstr "Start volumetric speed: "
|
||
|
||
msgid "End volumetric speed: "
|
||
msgstr "End volumetric speed: "
|
||
|
||
msgid "step: "
|
||
msgstr "step: "
|
||
|
||
msgid ""
|
||
"Please input valid values:\n"
|
||
"start > 0 step >= 0\n"
|
||
"end > start + step)"
|
||
msgstr ""
|
||
"Please input valid values:\n"
|
||
"start > 0 step >= 0\n"
|
||
"end > start + step)"
|
||
|
||
msgid "VFA test"
|
||
msgstr "VFA test"
|
||
|
||
msgid "Start speed: "
|
||
msgstr "Start speed: "
|
||
|
||
msgid "End speed: "
|
||
msgstr "End speed: "
|
||
|
||
msgid ""
|
||
"Please input valid values:\n"
|
||
"start > 10 step >= 0\n"
|
||
"end > start + step)"
|
||
msgstr ""
|
||
"Please input valid values:\n"
|
||
"start > 10 step >= 0\n"
|
||
"end > start + step)"
|
||
|
||
msgid "Start retraction length: "
|
||
msgstr "Start retraction length: "
|
||
|
||
msgid "End retraction length: "
|
||
msgstr "End retraction length: "
|
||
|
||
msgid "Network lookup"
|
||
msgstr "Network lookup"
|
||
|
||
msgid "Address"
|
||
msgstr "Address"
|
||
|
||
msgid "Hostname"
|
||
msgstr "Hostname"
|
||
|
||
msgid "Service name"
|
||
msgstr "Service name"
|
||
|
||
msgid "OctoPrint version"
|
||
msgstr "OctoPrint version"
|
||
|
||
msgid "Searching for devices"
|
||
msgstr "Searching for devices"
|
||
|
||
msgid "Finished"
|
||
msgstr "Finished"
|
||
|
||
msgid "Send to print"
|
||
msgstr "Send to print"
|
||
|
||
msgid "Upload to Printer Host with the following filename:"
|
||
msgstr "Upload to Printer Host with the following filename:"
|
||
|
||
msgid "Use forward slashes ( / ) as a directory separator if needed."
|
||
msgstr "Use forward slashes ( / ) as a directory separator if needed."
|
||
|
||
#, c-format, boost-format
|
||
msgid "Upload filename doesn't end with \"%s\". Do you wish to continue?"
|
||
msgstr "Upload filename doesn't end with \"%s\". Do you wish to continue?"
|
||
|
||
msgid "Simulate"
|
||
msgstr "Simulate"
|
||
|
||
msgid "Print host upload queue"
|
||
msgstr "Print host upload queue"
|
||
|
||
msgid "Progress"
|
||
msgstr "Progress"
|
||
|
||
msgid "Host"
|
||
msgstr "Host"
|
||
|
||
msgctxt "OfFile"
|
||
msgid "Size"
|
||
msgstr "Size"
|
||
|
||
msgid "Filename"
|
||
msgstr "Filename"
|
||
|
||
msgid "Error Message"
|
||
msgstr "Error Message"
|
||
|
||
msgid "Cancel selected"
|
||
msgstr "Cancel selected"
|
||
|
||
msgid "Show error message"
|
||
msgstr "Show error message"
|
||
|
||
msgid "Enqueued"
|
||
msgstr "Queued"
|
||
|
||
msgid "Uploading"
|
||
msgstr "Uploading"
|
||
|
||
msgid "Cancelling"
|
||
msgstr "Cancelling"
|
||
|
||
msgid "Error uploading to print host:"
|
||
msgstr "Error uploading to print host:"
|
||
|
||
msgid "Unable to perform boolean operation on selected parts"
|
||
msgstr "Unable to perform boolean operation on selected parts"
|
||
|
||
msgid ""
|
||
"Performed boolean intersection fails \n"
|
||
" because the selected parts have no intersection"
|
||
msgstr ""
|
||
"Performing boolean intersection failed \n"
|
||
" because the selected parts have no intersection"
|
||
|
||
msgid "Mesh Boolean"
|
||
msgstr "Mesh Boolean"
|
||
|
||
msgid "Please right click to assembly these objects."
|
||
msgstr "Please right click to assemble these objects."
|
||
|
||
msgid ""
|
||
"Please add at least one more object and select them together,\n"
|
||
"then right click to assembly these objects."
|
||
msgstr ""
|
||
"Please add at least one more object and select them together,\n"
|
||
"then right click to assemble these objects."
|
||
|
||
msgid "Union"
|
||
msgstr "Union"
|
||
|
||
msgid "Difference"
|
||
msgstr "Difference"
|
||
|
||
msgid "Intersection"
|
||
msgstr "Intersection"
|
||
|
||
msgid "Source Volume"
|
||
msgstr "Source Volume"
|
||
|
||
msgid "Tool Volume"
|
||
msgstr "Tool Volume"
|
||
|
||
msgid "selected"
|
||
msgstr "selected"
|
||
|
||
msgid "Part 1"
|
||
msgstr "Part 1"
|
||
|
||
msgid "Subtract from"
|
||
msgstr "Subtract from"
|
||
|
||
msgid "Part 2"
|
||
msgstr "Part 2"
|
||
|
||
msgid "Subtract with"
|
||
msgstr "Subtract with"
|
||
|
||
msgid "Delete input"
|
||
msgstr "Delete input"
|
||
|
||
msgid "Network Test"
|
||
msgstr "Network Test"
|
||
|
||
msgid "Start Test Multi-Thread"
|
||
msgstr "Start Test Multi-Thread"
|
||
|
||
msgid "Start Test Single-Thread"
|
||
msgstr "Start Test Single-Thread"
|
||
|
||
msgid "Export Log"
|
||
msgstr "Export Log"
|
||
|
||
msgid "Studio Version:"
|
||
msgstr "Studio Version:"
|
||
|
||
msgid "System Version:"
|
||
msgstr "System Version:"
|
||
|
||
msgid "DNS Server:"
|
||
msgstr "DNS Server:"
|
||
|
||
msgid "Test QIDILab"
|
||
msgstr "Test QIDILab"
|
||
|
||
msgid "Test QIDILab:"
|
||
msgstr "Test QIDILab:"
|
||
|
||
msgid "Test Bing.com"
|
||
msgstr "Test Bing.com"
|
||
|
||
msgid "Test bing.com:"
|
||
msgstr "Test bing.com:"
|
||
|
||
msgid "Test HTTP"
|
||
msgstr "Test HTTP"
|
||
|
||
msgid "Test HTTP Service:"
|
||
msgstr "Test HTTP Service:"
|
||
|
||
msgid "Test storage"
|
||
msgstr "Test storage"
|
||
|
||
msgid "Test Storage Upload:"
|
||
msgstr "Test Storage Upload:"
|
||
|
||
msgid "Test storage upgrade"
|
||
msgstr "Test storage upgrade"
|
||
|
||
msgid "Test Storage Upgrade:"
|
||
msgstr "Test Storage Upgrade:"
|
||
|
||
msgid "Test storage download"
|
||
msgstr "Test storage download"
|
||
|
||
msgid "Test Storage Download:"
|
||
msgstr "Test Storage Download:"
|
||
|
||
msgid "Test plugin download"
|
||
msgstr "Test plugin download"
|
||
|
||
msgid "Test Plugin Download:"
|
||
msgstr "Test Plugin Download:"
|
||
|
||
msgid "Test Storage Upload"
|
||
msgstr "Test Storage Upload"
|
||
|
||
msgid "Log Info"
|
||
msgstr "Log Info"
|
||
|
||
msgid "Select filament preset"
|
||
msgstr "Select filament preset"
|
||
|
||
msgid "Create Filament"
|
||
msgstr "Create Filament"
|
||
|
||
msgid "Create Based on Current Filament"
|
||
msgstr "Create Based on Current Filament"
|
||
|
||
msgid "Copy Current Filament Preset "
|
||
msgstr "Copy Current Filament Preset "
|
||
|
||
msgid "Basic Information"
|
||
msgstr "Basic Information"
|
||
|
||
msgid "Add Filament Preset under this filament"
|
||
msgstr "Add Filament Preset under this filament"
|
||
|
||
msgid "We could create the filament presets for your following printer:"
|
||
msgstr "We could create the filament presets for your following printer:"
|
||
|
||
msgid "Select Vendor"
|
||
msgstr "Select Vendor"
|
||
|
||
msgid "Input Custom Vendor"
|
||
msgstr "Input Custom Vendor"
|
||
|
||
msgid "Can't find vendor I want"
|
||
msgstr "Can't find vendor I want"
|
||
|
||
msgid "Select Type"
|
||
msgstr "Select Type"
|
||
|
||
msgid "Select Filament Preset"
|
||
msgstr "Select Filament Preset"
|
||
|
||
msgid "Serial"
|
||
msgstr "Serial"
|
||
|
||
msgid "e.g. Basic, Matte, Silk, Marble"
|
||
msgstr "e.g. Basic, Matte, Silk, Marble"
|
||
|
||
msgid "Filament Preset"
|
||
msgstr "Filament Preset"
|
||
|
||
msgid "Create"
|
||
msgstr "Create"
|
||
|
||
msgid "Vendor is not selected, please reselect vendor."
|
||
msgstr "Vendor is not selected; please reselect vendor."
|
||
|
||
msgid "Custom vendor is not input, please input custom vendor."
|
||
msgstr "Custom vendor missing; please input custom vendor."
|
||
|
||
msgid ""
|
||
"\"QIDI\" or \"Generic\" can not be used as a Vendor for custom filaments."
|
||
msgstr ""
|
||
"\"QIDI\" or \"Generic\" can not be used as a Vendor for custom filaments."
|
||
|
||
msgid "Filament type is not selected, please reselect type."
|
||
msgstr "Filament type is not selected, please reselect type."
|
||
|
||
msgid "Filament serial is not inputed, please input serial."
|
||
msgstr "Filament serial missing; please input serial."
|
||
|
||
msgid ""
|
||
"There may be escape characters in the vendor or serial input of filament. "
|
||
"Please delete and re-enter."
|
||
msgstr ""
|
||
"There may be disallowed characters in the vendor or serial input of the "
|
||
"filament. Please delete and re-enter."
|
||
|
||
msgid "All inputs in the custom vendor or serial are spaces. Please re-enter."
|
||
msgstr "All inputs in the custom vendor or serial are spaces. Please re-enter."
|
||
|
||
msgid "The vendor can not be a number. Please re-enter."
|
||
msgstr "The vendor can not be a number; please re-enter."
|
||
|
||
msgid ""
|
||
"You have not selected a printer or preset yet. Please select at least one."
|
||
msgstr ""
|
||
"You have not selected a printer or preset yet. Please select at least one."
|
||
|
||
#, c-format, boost-format
|
||
msgid ""
|
||
"The Filament name %s you created already exists. \n"
|
||
"If you continue creating, the preset created will be displayed with its full "
|
||
"name. Do you want to continue?"
|
||
msgstr ""
|
||
"The Filament name %s you created already exists. \n"
|
||
"If you continue, the preset created will be displayed with its full name. Do "
|
||
"you want to continue?"
|
||
|
||
msgid "Some existing presets have failed to be created, as follows:\n"
|
||
msgstr "Some existing presets have failed to be created, as follows:\n"
|
||
|
||
msgid ""
|
||
"\n"
|
||
"Do you want to rewrite it?"
|
||
msgstr ""
|
||
"\n"
|
||
"Do you want to rewrite it?"
|
||
|
||
msgid ""
|
||
"We would rename the presets as \"Vendor Type Serial @printer you "
|
||
"selected\". \n"
|
||
"To add preset for more prinetrs, Please go to printer selection"
|
||
msgstr ""
|
||
"We would rename the presets as \"Vendor Type Serial @printer you "
|
||
"selected\". \n"
|
||
"To add preset for more printers; please go to printer selection"
|
||
|
||
msgid "Create Printer/Nozzle"
|
||
msgstr "Create Printer/Nozzle"
|
||
|
||
msgid "Create Printer"
|
||
msgstr "Create Printer"
|
||
|
||
msgid "Create Nozzle for Existing Printer"
|
||
msgstr "Create Nozzle for Existing Printer"
|
||
|
||
msgid "Create from Template"
|
||
msgstr "Create from Template"
|
||
|
||
msgid "Create Based on Current Printer"
|
||
msgstr "Create Based on Current Printer"
|
||
|
||
msgid "wiki"
|
||
msgstr "wiki"
|
||
|
||
msgid "Import Preset"
|
||
msgstr "Import Preset"
|
||
|
||
msgid "Create Type"
|
||
msgstr "Create Type"
|
||
|
||
msgid "The model is not fond, place reselect vendor."
|
||
msgstr "The model was not found; please reselect vendor."
|
||
|
||
msgid "Select Model"
|
||
msgstr "Select Model"
|
||
|
||
msgid "Select Printer"
|
||
msgstr "Select Printer"
|
||
|
||
msgid "Input Custom Model"
|
||
msgstr "Input Custom Model"
|
||
|
||
msgid "Can't find my printer model"
|
||
msgstr "Can't find my printer model"
|
||
|
||
msgid "Rectangle"
|
||
msgstr "Rectangle"
|
||
|
||
msgid "Printable Space"
|
||
msgstr "Printable Space"
|
||
|
||
msgid "Hot Bed STL"
|
||
msgstr "Hot Bed STL"
|
||
|
||
msgid "Load stl"
|
||
msgstr "Load stl"
|
||
|
||
msgid "Hot Bed SVG"
|
||
msgstr "Hot Bed SVG"
|
||
|
||
msgid "Load svg"
|
||
msgstr "Load svg"
|
||
|
||
msgid "Max Print Height"
|
||
msgstr "Max Print Height"
|
||
|
||
msgid "Preset path is not found, please reselect vendor."
|
||
msgstr "Preset path is not found; please reselect vendor."
|
||
|
||
msgid "The printer model was not found, please reselect."
|
||
msgstr "The printer model was not found, please reselect."
|
||
|
||
msgid "The nozzle diameter is not fond, place reselect."
|
||
msgstr "The nozzle diameter was not found; please reselect."
|
||
|
||
msgid "The printer preset is not fond, place reselect."
|
||
msgstr "The printer preset was not found; please reselect."
|
||
|
||
msgid "Printer Preset"
|
||
msgstr "Printer Preset"
|
||
|
||
msgid "Filament Preset Template"
|
||
msgstr "Filament Preset Template"
|
||
|
||
msgid "Deselect All"
|
||
msgstr "Deselect All"
|
||
|
||
msgid "Process Preset Template"
|
||
msgstr "Process Preset Template"
|
||
|
||
msgid "Back Page 1"
|
||
msgstr "Back Page 1"
|
||
|
||
msgid ""
|
||
"You have not yet chosen which printer preset to create based on. Please "
|
||
"choose the vendor and model of the printer"
|
||
msgstr ""
|
||
"You have not yet chosen which printer preset to create based on. Please "
|
||
"choose the vendor and model of the printer"
|
||
|
||
msgid ""
|
||
"You have entered an illegal input in the printable area section on the first "
|
||
"page. Please check before creating it."
|
||
msgstr ""
|
||
"You have entered a disallowed character in the printable area section on the "
|
||
"first page. Please use only numbers."
|
||
|
||
msgid "The custom printer or model is not inputed, place input."
|
||
msgstr "The custom printer or model missing; please input."
|
||
|
||
msgid ""
|
||
"The printer preset you created already has a preset with the same name. Do "
|
||
"you want to overwrite it?\n"
|
||
"\tYes: Overwrite the printer preset with the same name, and filament and "
|
||
"process presets with the same preset name will be recreated \n"
|
||
"and filament and process presets without the same preset name will be "
|
||
"reserve.\n"
|
||
"\tCancel: Do not create a preset, return to the creation interface."
|
||
msgstr ""
|
||
"The printer preset you created already has a preset with the same name. Do "
|
||
"you want to overwrite it?\n"
|
||
"\tYes: Overwrite the printer preset with the same name, and filament and "
|
||
"process presets with the same preset name will be recreated \n"
|
||
"and filament and process presets without the same preset name will be "
|
||
"reserved.\n"
|
||
"\tCancel: Do not create a preset; return to the creation interface."
|
||
|
||
msgid "You need to select at least one filament preset."
|
||
msgstr "You need to select at least one filament preset."
|
||
|
||
msgid "You need to select at least one process preset."
|
||
msgstr "You need to select at least one process preset."
|
||
|
||
msgid "Create filament presets failed. As follows:\n"
|
||
msgstr "Create filament presets failed. As follows:\n"
|
||
|
||
msgid "Create process presets failed. As follows:\n"
|
||
msgstr "Create process presets failed. As follows:\n"
|
||
|
||
msgid "Vendor is not found, please reselect."
|
||
msgstr "Vendor is not found; please reselect."
|
||
|
||
msgid "Current vendor has no models, please reselect."
|
||
msgstr "Current vendor has no models, please reselect."
|
||
|
||
msgid ""
|
||
"You have not selected the vendor and model or inputed the custom vendor and "
|
||
"model."
|
||
msgstr ""
|
||
"You have not selected the vendor and model or input the custom vendor and "
|
||
"model."
|
||
|
||
msgid ""
|
||
"There may be escape characters in the custom printer vendor or model. Please "
|
||
"delete and re-enter."
|
||
msgstr ""
|
||
"There may be escape characters in the custom printer vendor or model. Please "
|
||
"delete and re-enter."
|
||
|
||
msgid ""
|
||
"All inputs in the custom printer vendor or model are spaces. Please re-enter."
|
||
msgstr ""
|
||
"All inputs in the custom printer vendor or model are spaces. Please re-enter."
|
||
|
||
msgid "Please check bed printable shape and origin input."
|
||
msgstr "Please check bed printable shape and origin input."
|
||
|
||
msgid ""
|
||
"You have not yet selected the printer to replace the nozzle, please choose."
|
||
msgstr ""
|
||
"You have not yet selected the printer to replace the nozzle for; please "
|
||
"choose a printer."
|
||
|
||
msgid "Create Printer Successful"
|
||
msgstr "Create Printer Successful"
|
||
|
||
msgid "Create Filament Successful"
|
||
msgstr "Filament Created Successfully"
|
||
|
||
msgid "Printer Created"
|
||
msgstr "Printer Created"
|
||
|
||
msgid "Please go to printer settings to edit your presets"
|
||
msgstr "Please go to printer settings to edit your presets"
|
||
|
||
msgid "Filament Created"
|
||
msgstr "Filament Created"
|
||
|
||
msgid ""
|
||
"Please go to filament setting to edit your presets if you need.\n"
|
||
"Please note that nozzle temperature, hot bed temperature, and maximum "
|
||
"volumetric speed has a significant impact on printing quality. Please set "
|
||
"them carefully."
|
||
msgstr ""
|
||
"Please go to filament settings to edit your presets if you need to.\n"
|
||
"Please note that nozzle temperature, hot bed temperature, and maximum "
|
||
"volumetric speed each have a significant impact on printing quality. Please "
|
||
"set them carefully."
|
||
|
||
msgid ""
|
||
"Studio has detected that your user presets synchronization function is not "
|
||
"enabled, which may result in unsuccessful Filament settings on the Device "
|
||
"page. \n"
|
||
"Click \"Sync user presets\" to enable the synchronization function."
|
||
msgstr ""
|
||
"Studio has detected that your user presets synchronization function is not "
|
||
"enabled, which may result in unsuccessful Filament settings on the Device "
|
||
"page. \n"
|
||
"Click \"Sync user presets\" to enable the synchronization function."
|
||
|
||
msgid "Printer Setting"
|
||
msgstr "Printer Setting"
|
||
|
||
msgid "Printer preset bundle(.qdscfg)"
|
||
msgstr ""
|
||
|
||
msgid "Filament preset bundle(.qdsflmt)"
|
||
msgstr ""
|
||
|
||
msgid "Printer presets(.zip)"
|
||
msgstr "Printer presets(.zip)"
|
||
|
||
msgid "Filament presets(.zip)"
|
||
msgstr "Filament presets(.zip)"
|
||
|
||
msgid "Process presets(.zip)"
|
||
msgstr "Process presets(.zip)"
|
||
|
||
msgid "initialize fail"
|
||
msgstr "initialize fail"
|
||
|
||
msgid "add file fail"
|
||
msgstr "add file fail"
|
||
|
||
msgid "add bundle structure file fail"
|
||
msgstr "add bundle structure file fail"
|
||
|
||
msgid "finalize fail"
|
||
msgstr "finalize fail"
|
||
|
||
msgid "open zip written fail"
|
||
msgstr "open zip written fail"
|
||
|
||
msgid "Export successful"
|
||
msgstr "Export successful"
|
||
|
||
#, c-format, boost-format
|
||
msgid ""
|
||
"The '%s' folder already exists in the current directory. Do you want to "
|
||
"clear it and rebuild it.\n"
|
||
"If not, a time suffix will be added, and you can modify the name after "
|
||
"creation."
|
||
msgstr ""
|
||
"The '%s' folder already exists in the current directory. Do you want to "
|
||
"clear it and rebuild it?\n"
|
||
"If not, a time suffix will be added, and you can modify the name after "
|
||
"creation."
|
||
|
||
msgid ""
|
||
"Printer and all the filament&process presets that belong to the printer. \n"
|
||
"Can be shared with others."
|
||
msgstr ""
|
||
"Printer and all the filament & process presets that belong to the printer,\n"
|
||
"Can be shared with others"
|
||
|
||
msgid ""
|
||
"User's fillment preset set. \n"
|
||
"Can be shared with others."
|
||
msgstr ""
|
||
"User's fillment preset set. \n"
|
||
"Can be shared with others."
|
||
|
||
msgid ""
|
||
"Only display printer names with changes to printer, filament, and process "
|
||
"presets."
|
||
msgstr ""
|
||
"Only display printers with changes to printer, filament, and process presets "
|
||
"are displayed."
|
||
|
||
msgid "Only display the filament names with changes to filament presets."
|
||
msgstr "Only display the filament names with changes to filament presets."
|
||
|
||
msgid ""
|
||
"Only printer names with user printer presets will be displayed, and each "
|
||
"preset you choose will be exported as a zip."
|
||
msgstr ""
|
||
"Only printer names with user printer presets will be displayed, and each "
|
||
"preset you choose will be exported as a zip."
|
||
|
||
msgid ""
|
||
"Only the filament names with user filament presets will be displayed, \n"
|
||
"and all user filament presets in each filament name you select will be "
|
||
"exported as a zip."
|
||
msgstr ""
|
||
"Only the filament names with user filament presets will be displayed, \n"
|
||
"and all user filament presets in each filament name you select will be "
|
||
"exported as a zip."
|
||
|
||
msgid ""
|
||
"Only printer names with changed process presets will be displayed, \n"
|
||
"and all user process presets in each printer name you select will be "
|
||
"exported as a zip."
|
||
msgstr ""
|
||
"Only printer names with changed process presets will be displayed, \n"
|
||
"and all user process presets in each printer name you select will be "
|
||
"exported as a zip."
|
||
|
||
msgid "Please select at least one printer or filament."
|
||
msgstr "Please select at least one printer or filament."
|
||
|
||
msgid "Please select a type you want to export"
|
||
msgstr "Please select a preset type you want to export"
|
||
|
||
msgid "Failed to create temporary folder, please try Export Configs again."
|
||
msgstr "Failed to create temporary folder, please try Export Configs again."
|
||
|
||
msgid "Edit Filament"
|
||
msgstr "Edit Filament"
|
||
|
||
msgid "Filament presets under this filament"
|
||
msgstr "Filament presets under this filament"
|
||
|
||
msgid ""
|
||
"Note: If the only preset under this filament is deleted, the filament will "
|
||
"be deleted after exiting the dialog."
|
||
msgstr ""
|
||
"Note: If the only preset under this filament is deleted, the filament will "
|
||
"be deleted after exiting the dialog."
|
||
|
||
msgid "Presets inherited by other presets can not be deleted"
|
||
msgstr "Presets inherited by other presets can not be deleted"
|
||
|
||
msgid "The following presets inherits this preset."
|
||
msgid_plural "The following preset inherits this preset."
|
||
msgstr[0] ""
|
||
msgstr[1] ""
|
||
|
||
msgid "Delete Preset"
|
||
msgstr "Delete Preset"
|
||
|
||
msgid "Are you sure to delete the selected preset?"
|
||
msgstr "Are you sure to delete the selected preset?"
|
||
|
||
msgid "Delete preset"
|
||
msgstr "Delete preset"
|
||
|
||
msgid "+ Add Preset"
|
||
msgstr "+ Add Preset"
|
||
|
||
msgid "Delete Filament"
|
||
msgstr "Delete Filament"
|
||
|
||
msgid ""
|
||
"All the filament presets belong to this filament would be deleted. \n"
|
||
"If you are using this filament on your printer, please reset the filament "
|
||
"information for that slot."
|
||
msgstr ""
|
||
"All the filament presets belong to this filament would be deleted. \n"
|
||
"If you are using this filament on your printer, please reset the filament "
|
||
"information for that slot."
|
||
|
||
msgid "Delete filament"
|
||
msgstr "Delete filament"
|
||
|
||
msgid "Add Preset"
|
||
msgstr "Add Preset"
|
||
|
||
msgid "Add preset for new printer"
|
||
msgstr "Add preset for new printer"
|
||
|
||
msgid "Copy preset from filament"
|
||
msgstr "Copy preset from filament"
|
||
|
||
msgid "The filament choice not find filament preset, please reselect it"
|
||
msgstr "The filament choice not find filament preset, please reselect it"
|
||
|
||
msgid "[Delete Required]"
|
||
msgstr "[Delete Required]"
|
||
|
||
msgid "Edit Preset"
|
||
msgstr "Edit Preset"
|
||
|
||
msgid "For more information, please check out Wiki"
|
||
msgstr "For more information, please check out our Wiki"
|
||
|
||
msgid "Collapse"
|
||
msgstr "Collapse"
|
||
|
||
msgid "Daily Tips"
|
||
msgstr "Daily Tips"
|
||
|
||
msgid ""
|
||
"Your nozzle diameter in preset is not consistent with memorized nozzle "
|
||
"diameter. Did you change your nozzle lately?"
|
||
msgstr ""
|
||
"Your nozzle diameter in preset is not consistent with the saved nozzle "
|
||
"diameter. Have you changed your nozzle?"
|
||
|
||
#, c-format, boost-format
|
||
msgid "*Printing %s material with %s may cause nozzle damage"
|
||
msgstr "*Printing %s material with %s may cause nozzle damage"
|
||
|
||
msgid "Need select printer"
|
||
msgstr "Need select printer"
|
||
|
||
msgid "The start, end or step is not valid value."
|
||
msgstr "The start, end or step is not valid value."
|
||
|
||
msgid ""
|
||
"Unable to calibrate: maybe because the set calibration value range is too "
|
||
"large, or the step is too small"
|
||
msgstr ""
|
||
"Unable to calibrate: maybe because the set calibration value range is too "
|
||
"large, or the step is too small"
|
||
|
||
msgid "Physical Printer"
|
||
msgstr "Physical Printer"
|
||
|
||
msgid "Print Host upload"
|
||
msgstr "Print Host upload"
|
||
|
||
msgid "Could not get a valid Printer Host reference"
|
||
msgstr "Could not get a valid Printer Host reference"
|
||
|
||
msgid "Success!"
|
||
msgstr "Success!"
|
||
|
||
msgid "Refresh Printers"
|
||
msgstr "Refresh Printers"
|
||
|
||
msgid ""
|
||
"HTTPS CA file is optional. It is only needed if you use HTTPS with a self-"
|
||
"signed certificate."
|
||
msgstr ""
|
||
"HTTPS CA file is optional. It is only needed if you use HTTPS with a self-"
|
||
"signed certificate."
|
||
|
||
msgid "Certificate files (*.crt, *.pem)|*.crt;*.pem|All files|*.*"
|
||
msgstr "Certificate files (*.crt, *.pem)|*.crt;*.pem|All files|*.*"
|
||
|
||
msgid "Open CA certificate file"
|
||
msgstr "Open CA certificate file"
|
||
|
||
#, c-format, boost-format
|
||
msgid ""
|
||
"On this system, %s uses HTTPS certificates from the system Certificate Store "
|
||
"or Keychain."
|
||
msgstr ""
|
||
"On this system, %s uses HTTPS certificates from the system Certificate Store "
|
||
"or Keychain."
|
||
|
||
msgid ""
|
||
"To use a custom CA file, please import your CA file into Certificate Store / "
|
||
"Keychain."
|
||
msgstr ""
|
||
"To use a custom CA file, please import your CA file into Certificate Store / "
|
||
"Keychain."
|
||
|
||
msgid "Connection to printers connected via the print host failed."
|
||
msgstr "Connection to printers connected via the print host failed."
|
||
|
||
#, c-format, boost-format
|
||
msgid "Mismatched type of print host: %s"
|
||
msgstr "Mismatched type of print host: %s"
|
||
|
||
msgid "Connection to AstroBox works correctly."
|
||
msgstr "Connection to AstroBox is working correctly."
|
||
|
||
msgid "Could not connect to AstroBox"
|
||
msgstr "Could not connect to AstroBox"
|
||
|
||
msgid "Note: AstroBox version at least 1.1.0 is required."
|
||
msgstr "Note: AstroBox version 1.1.0 or higher is required."
|
||
|
||
msgid "Connection to Duet works correctly."
|
||
msgstr "Connection to Duet is working correctly."
|
||
|
||
msgid "Could not connect to Duet"
|
||
msgstr "Could not connect to Duet"
|
||
|
||
msgid "Unknown error occured"
|
||
msgstr "Unknown error occured"
|
||
|
||
msgid "Wrong password"
|
||
msgstr "Wrong password"
|
||
|
||
msgid "Could not get resources to create a new connection"
|
||
msgstr "Could not get resources to create a new connection"
|
||
|
||
msgid "Upload not enabled on FlashAir card."
|
||
msgstr "Upload not enabled on FlashAir card."
|
||
|
||
msgid "Connection to FlashAir works correctly and upload is enabled."
|
||
msgstr "Connection to FlashAir is working correctly and upload is enabled."
|
||
|
||
msgid "Could not connect to FlashAir"
|
||
msgstr "Could not connect to FlashAir"
|
||
|
||
msgid ""
|
||
"Note: FlashAir with firmware 2.00.02 or newer and activated upload function "
|
||
"is required."
|
||
msgstr ""
|
||
"Note: FlashAir with firmware 2.00.02 or newer and activated upload function "
|
||
"is required."
|
||
|
||
msgid "Connection to MKS works correctly."
|
||
msgstr "Connection to MKS is working correctly."
|
||
|
||
msgid "Could not connect to MKS"
|
||
msgstr "Could not connect to MKS"
|
||
|
||
msgid "Connection to OctoPrint works correctly."
|
||
msgstr "Connection to OctoPrint is working correctly."
|
||
|
||
msgid "Could not connect to OctoPrint"
|
||
msgstr "Could not connect to OctoPrint"
|
||
|
||
msgid "Note: OctoPrint version at least 1.1.0 is required."
|
||
msgstr "Note: OctoPrint version 1.1.0 or higher is required."
|
||
|
||
msgid "Connection to Prusa SL1 / SL1S works correctly."
|
||
msgstr "Connection to Prusa SL1 / SL1S is working correctly."
|
||
|
||
msgid "Could not connect to Prusa SLA"
|
||
msgstr "Could not connect to Prusa SLA"
|
||
|
||
msgid "Connection to PrusaLink works correctly."
|
||
msgstr "Connection to PrusaLink is working correctly."
|
||
|
||
msgid "Could not connect to PrusaLink"
|
||
msgstr "Could not connect to PrusaLink"
|
||
|
||
msgid "Connection to Repetier works correctly."
|
||
msgstr "Connection to Repetier is working correctly."
|
||
|
||
msgid "Could not connect to Repetier"
|
||
msgstr "Could not connect to Repetier"
|
||
|
||
msgid "Note: Repetier version at least 0.90.0 is required."
|
||
msgstr "Note: Repetier version 0.90.0 or higher is required."
|
||
|
||
#, boost-format
|
||
msgid ""
|
||
"HTTP status: %1%\n"
|
||
"Message body: \"%2%\""
|
||
msgstr ""
|
||
"HTTP status: %1%\n"
|
||
"Message body: \"%2%\""
|
||
|
||
#, boost-format
|
||
msgid ""
|
||
"Parsing of host response failed.\n"
|
||
"Message body: \"%1%\"\n"
|
||
"Error: \"%2%\""
|
||
msgstr ""
|
||
"Parsing of host response failed.\n"
|
||
"Message body: \"%1%\"\n"
|
||
"Error: \"%2%\""
|
||
|
||
#, boost-format
|
||
msgid ""
|
||
"Enumeration of host printers failed.\n"
|
||
"Message body: \"%1%\"\n"
|
||
"Error: \"%2%\""
|
||
msgstr ""
|
||
"Enumeration of host printers failed.\n"
|
||
"Message body: \"%1%\"\n"
|
||
"Error: \"%2%\""
|
||
|
||
msgid ""
|
||
"It has a small layer height, and results in almost negligible layer lines "
|
||
"and high printing quality. It is suitable for most general printing cases."
|
||
msgstr ""
|
||
"It has a small layer height, and results in almost negligible layer lines "
|
||
"and high print quality. It is suitable for most general printing cases."
|
||
|
||
msgid ""
|
||
"Compared with the default profile of a 0.2 mm nozzle, it has lower speeds "
|
||
"and acceleration, and the sparse infill pattern is Gyroid. So, it results in "
|
||
"much higher printing quality, but a much longer printing time."
|
||
msgstr ""
|
||
"Compared with the default profile of a 0.2 mm nozzle, it has lower speeds "
|
||
"and acceleration, and the sparse infill pattern is Gyroid. This results in "
|
||
"much higher print quality but a much longer print time."
|
||
|
||
msgid ""
|
||
"Compared with the default profile of a 0.2 mm nozzle, it has a slightly "
|
||
"bigger layer height, and results in almost negligible layer lines, and "
|
||
"slightly shorter printing time."
|
||
msgstr ""
|
||
"Compared with the default profile of a 0.2 mm nozzle, it has a slightly "
|
||
"bigger layer height. This results in almost negligible layer lines and "
|
||
"slightly longer print time."
|
||
|
||
msgid ""
|
||
"Compared with the default profile of a 0.2 mm nozzle, it has a bigger layer "
|
||
"height, and results in slightly visible layer lines, but shorter printing "
|
||
"time."
|
||
msgstr ""
|
||
"Compared with the default profile of a 0.2 mm nozzle, it has a bigger layer "
|
||
"height. This results in slightly visible layer lines but shorter print time."
|
||
|
||
msgid ""
|
||
"Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer "
|
||
"height, and results in almost invisible layer lines and higher printing "
|
||
"quality, but shorter printing time."
|
||
msgstr ""
|
||
"Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer "
|
||
"height. This results in almost invisible layer lines and higher print "
|
||
"quality but longer print time."
|
||
|
||
msgid ""
|
||
"Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer "
|
||
"lines, lower speeds and acceleration, and the sparse infill pattern is "
|
||
"Gyroid. So, it results in almost invisible layer lines and much higher "
|
||
"printing quality, but much longer printing time."
|
||
msgstr ""
|
||
"Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer "
|
||
"lines, lower speeds and acceleration, and the sparse infill pattern is "
|
||
"Gyroid. This results in almost invisible layer lines and much higher print "
|
||
"quality but much longer print time."
|
||
|
||
msgid ""
|
||
"Compared with the default profile of 0.2 mm nozzle, it has a smaller layer "
|
||
"height, and results in minimal layer lines and higher printing quality, but "
|
||
"shorter printing time."
|
||
msgstr ""
|
||
"Compared with the default profile of 0.2 mm nozzle, it has a smaller layer "
|
||
"height. This results in minimal layer lines and higher print quality but "
|
||
"longer print time."
|
||
|
||
msgid ""
|
||
"Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer "
|
||
"lines, lower speeds and acceleration, and the sparse infill pattern is "
|
||
"Gyroid. So, it results in minimal layer lines and much higher printing "
|
||
"quality, but much longer printing time."
|
||
msgstr ""
|
||
"Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer "
|
||
"lines, lower speeds and acceleration, and the sparse infill pattern is "
|
||
"Gyroid. This results in minimal layer lines and much higher print quality "
|
||
"but much longer print time."
|
||
|
||
msgid ""
|
||
"It has a general layer height, and results in general layer lines and "
|
||
"printing quality. It is suitable for most general printing cases."
|
||
msgstr ""
|
||
"It has a normal layer height, and results in average layer lines and print "
|
||
"quality. It is suitable for most printing cases."
|
||
|
||
msgid ""
|
||
"Compared with the default profile of a 0.4 mm nozzle, it has more wall loops "
|
||
"and a higher sparse infill density. So, it results in higher strength of the "
|
||
"prints, but more filament consumption and longer printing time."
|
||
msgstr ""
|
||
"Compared with the default profile of a 0.4 mm nozzle, it has more wall loops "
|
||
"and a higher sparse infill density. This results in higher print strength "
|
||
"but more filament consumption and longer print time."
|
||
|
||
msgid ""
|
||
"Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer "
|
||
"height, and results in more apparent layer lines and lower printing quality, "
|
||
"but slightly shorter printing time."
|
||
msgstr ""
|
||
"Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer "
|
||
"height. This results in more apparent layer lines and lower print quality "
|
||
"but slightly shorter print time."
|
||
|
||
msgid ""
|
||
"Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer "
|
||
"height, and results in more apparent layer lines and lower printing quality, "
|
||
"but shorter printing time."
|
||
msgstr ""
|
||
"Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer "
|
||
"height. This results in more apparent layer lines and lower print quality "
|
||
"but shorter print time."
|
||
|
||
msgid ""
|
||
"Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer "
|
||
"height, and results in less apparent layer lines and higher printing "
|
||
"quality, but longer printing time."
|
||
msgstr ""
|
||
"Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer "
|
||
"height. This results in less apparent layer lines and higher print quality "
|
||
"but longer print time."
|
||
|
||
msgid ""
|
||
"Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer "
|
||
"height, lower speeds and acceleration, and the sparse infill pattern is "
|
||
"Gyroid. So, it results in less apparent layer lines and much higher printing "
|
||
"quality, but much longer printing time."
|
||
msgstr ""
|
||
"Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer "
|
||
"height, lower speeds and acceleration, and the sparse infill pattern is "
|
||
"Gyroid. This results in less apparent layer lines and much higher print "
|
||
"quality but much longer print time."
|
||
|
||
msgid ""
|
||
"Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer "
|
||
"height, and results in almost negligible layer lines and higher printing "
|
||
"quality, but longer printing time."
|
||
msgstr ""
|
||
"Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer "
|
||
"height. This results in almost negligible layer lines and higher print "
|
||
"quality but longer print time."
|
||
|
||
msgid ""
|
||
"Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer "
|
||
"height, lower speeds and acceleration, and the sparse infill pattern is "
|
||
"Gyroid. So, it results in almost negligible layer lines and much higher "
|
||
"printing quality, but much longer printing time."
|
||
msgstr ""
|
||
"Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer "
|
||
"height, lower speeds and acceleration, and the sparse infill pattern is "
|
||
"Gyroid. This results in almost negligible layer lines and much higher print "
|
||
"quality but much longer print time."
|
||
|
||
msgid ""
|
||
"Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer "
|
||
"height, and results in almost negligible layer lines and longer printing "
|
||
"time."
|
||
msgstr ""
|
||
"Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer "
|
||
"height. This results in almost negligible layer lines and longer print time."
|
||
|
||
msgid ""
|
||
"It has a big layer height, and results in apparent layer lines and ordinary "
|
||
"printing quality and printing time."
|
||
msgstr ""
|
||
"It has a big layer height, and results in apparent layer lines and ordinary "
|
||
"printing quality and printing time."
|
||
|
||
msgid ""
|
||
"Compared with the default profile of a 0.6 mm nozzle, it has more wall loops "
|
||
"and a higher sparse infill density. So, it results in higher strength of the "
|
||
"prints, but more filament consumption and longer printing time."
|
||
msgstr ""
|
||
"Compared with the default profile of a 0.6 mm nozzle, it has more wall loops "
|
||
"and a higher sparse infill density. This results in higher print strength "
|
||
"but more filament consumption and longer print time."
|
||
|
||
msgid ""
|
||
"Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer "
|
||
"height, and results in more apparent layer lines and lower printing quality, "
|
||
"but shorter printing time in some printing cases."
|
||
msgstr ""
|
||
"Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer "
|
||
"height. This results in more apparent layer lines and lower print quality "
|
||
"but shorter print time in some cases."
|
||
|
||
msgid ""
|
||
"Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer "
|
||
"height, and results in much more apparent layer lines and much lower "
|
||
"printing quality, but shorter printing time in some printing cases."
|
||
msgstr ""
|
||
"Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer "
|
||
"height. This results in much more apparent layer lines and much lower print "
|
||
"quality, but shorter print time in some cases."
|
||
|
||
msgid ""
|
||
"Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer "
|
||
"height, and results in less apparent layer lines and slight higher printing "
|
||
"quality, but longer printing time."
|
||
msgstr ""
|
||
"Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer "
|
||
"height. This results in less apparent layer lines and slightly higher print "
|
||
"quality but longer print time."
|
||
|
||
msgid ""
|
||
"Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer "
|
||
"height, and results in less apparent layer lines and higher printing "
|
||
"quality, but longer printing time."
|
||
msgstr ""
|
||
"Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer "
|
||
"height. This results in less apparent layer lines and higher print quality "
|
||
"but longer print time."
|
||
|
||
msgid ""
|
||
"It has a very big layer height, and results in very apparent layer lines, "
|
||
"low printing quality and general printing time."
|
||
msgstr ""
|
||
"It has a very big layer height, and results in very apparent layer lines, "
|
||
"low print quality and shorter printing time."
|
||
|
||
msgid ""
|
||
"Compared with the default profile of a 0.8 mm nozzle, it has a bigger layer "
|
||
"height, and results in very apparent layer lines and much lower printing "
|
||
"quality, but shorter printing time in some printing cases."
|
||
msgstr ""
|
||
"Compared with the default profile of a 0.8 mm nozzle, it has a bigger layer "
|
||
"height. This results in very apparent layer lines and much lower print "
|
||
"quality but shorter print time in some cases."
|
||
|
||
msgid ""
|
||
"Compared with the default profile of a 0.8 mm nozzle, it has a much bigger "
|
||
"layer height, and results in extremely apparent layer lines and much lower "
|
||
"printing quality, but much shorter printing time in some printing cases."
|
||
msgstr ""
|
||
"Compared with the default profile of a 0.8 mm nozzle, it has a much bigger "
|
||
"layer height. This results in extremely apparent layer lines and much lower "
|
||
"print quality but much shorter print time in some cases."
|
||
|
||
msgid ""
|
||
"Compared with the default profile of a 0.8 mm nozzle, it has a slightly "
|
||
"smaller layer height, and results in slightly less but still apparent layer "
|
||
"lines and slightly higher printing quality, but longer printing time in some "
|
||
"printing cases."
|
||
msgstr ""
|
||
"Compared with the default profile of a 0.8 mm nozzle, it has a slightly "
|
||
"smaller layer height. This results in slightly less but still apparent layer "
|
||
"lines and slightly higher print quality, but longer print time in some cases."
|
||
|
||
msgid ""
|
||
"Compared with the default profile of a 0.8 mm nozzle, it has a smaller layer "
|
||
"height, and results in less but still apparent layer lines and slightly "
|
||
"higher printing quality, but longer printing time in some printing cases."
|
||
msgstr ""
|
||
"Compared with the default profile of a 0.8 mm nozzle, it has a smaller layer "
|
||
"height. This results in less but still apparent layer lines and slightly "
|
||
"higher print quality, but longer print time in some cases."
|
||
|
||
msgid ""
|
||
"This is neither a commonly used filament, nor one of QIDI filaments, and it "
|
||
"varies a lot from brand to brand. So, it's highly recommended to ask its "
|
||
"vendor for suitable profile before printing and adjust some parameters "
|
||
"according to its performances."
|
||
msgstr ""
|
||
"This is neither a commonly used filament, nor a QIDI filament, and it varies "
|
||
"a lot from brand to brand, so it's highly recommended to ask the vendor for "
|
||
"a suitable profile before printing and adjust some parameters according to "
|
||
"its performance."
|
||
|
||
msgid "No AMS"
|
||
msgstr "No AMS"
|
||
|
||
msgid "There is no device available to send printing."
|
||
msgstr ""
|
||
|
||
msgid "The number of printers in use simultaneously cannot be equal to 0."
|
||
msgstr ""
|
||
|
||
msgid "Use External Spool"
|
||
msgstr "Use External Spool"
|
||
|
||
msgid "Use AMS"
|
||
msgstr "Use AMS"
|
||
|
||
msgid "Select Printers"
|
||
msgstr "Select Printers"
|
||
|
||
msgid "Device Name"
|
||
msgstr "Device Name"
|
||
|
||
msgid "Device Status"
|
||
msgstr "Device Status"
|
||
|
||
msgid "Ams Status"
|
||
msgstr "AMS Status"
|
||
|
||
msgid ""
|
||
"Please select the devices you would like to manage here (up to 6 devices)"
|
||
msgstr ""
|
||
|
||
msgid "Printing Options"
|
||
msgstr "Printing Options"
|
||
|
||
msgid "Send Options"
|
||
msgstr "Send Options"
|
||
|
||
msgid ""
|
||
"printers at the same time.(It depends on how many devices can undergo "
|
||
"heating at the same time.)"
|
||
msgstr ""
|
||
"printers at the same time. (It depends on how many devices can undergo "
|
||
"heating at the same time.)"
|
||
|
||
msgid "Wait"
|
||
msgstr "Wait"
|
||
|
||
msgid ""
|
||
"minute each batch.(It depends on how long it takes to complete the heating.)"
|
||
msgstr ""
|
||
"minute each batch. (It depends on how long it takes to complete heating.)"
|
||
|
||
msgid "Task Sending"
|
||
msgstr "Task Sending"
|
||
|
||
msgid "Task Sent"
|
||
msgstr "Task Sent"
|
||
|
||
msgid "Edit multiple printers"
|
||
msgstr ""
|
||
|
||
msgid "Select connected printers (0/6)"
|
||
msgstr ""
|
||
|
||
#, c-format, boost-format
|
||
msgid "Select Connected Printers (%d/6)"
|
||
msgstr ""
|
||
|
||
#, c-format, boost-format
|
||
msgid "The maximum number of printers that can be selected is %d"
|
||
msgstr ""
|
||
|
||
msgid "No task"
|
||
msgstr "No task"
|
||
|
||
msgid "Edit Printers"
|
||
msgstr ""
|
||
|
||
msgid "Task Name"
|
||
msgstr "Task Name"
|
||
|
||
msgid "Actions"
|
||
msgstr "Actions"
|
||
|
||
msgid "Task Status"
|
||
msgstr "Task Status"
|
||
|
||
msgid "Sent Time"
|
||
msgstr "Sent Time"
|
||
|
||
msgid "There are no tasks to be sent!"
|
||
msgstr "There are no tasks to be sent!"
|
||
|
||
msgid "No historical tasks!"
|
||
msgstr "No historical tasks!"
|
||
|
||
msgid "Upgrading"
|
||
msgstr ""
|
||
|
||
msgid "syncing"
|
||
msgstr ""
|
||
|
||
msgid "Printing Finish"
|
||
msgstr ""
|
||
|
||
msgid "Printing Failed"
|
||
msgstr ""
|
||
|
||
msgid "Printing Pause"
|
||
msgstr ""
|
||
|
||
msgid "Pending"
|
||
msgstr ""
|
||
|
||
msgid "Sending"
|
||
msgstr "Sending"
|
||
|
||
msgid "Sending Finish"
|
||
msgstr ""
|
||
|
||
msgid "Sending Cancel"
|
||
msgstr ""
|
||
|
||
msgid "Sending Failed"
|
||
msgstr ""
|
||
|
||
msgid "Print Success"
|
||
msgstr ""
|
||
|
||
msgid "Print Failed"
|
||
msgstr ""
|
||
|
||
msgid "Removed"
|
||
msgstr ""
|
||
|
||
#: resources/data/hints.ini: [hint:How to use keyboard shortcuts]
|
||
msgid ""
|
||
"How to use keyboard shortcuts\n"
|
||
"Did you know that QIDI Studio offers a wide range of keyboard shortcuts and "
|
||
"3D scene operations."
|
||
msgstr ""
|
||
"How to use keyboard shortcuts\n"
|
||
"Did you know that QIDI Studio offers a wide range of keyboard shortcuts and "
|
||
"3D scene operations?"
|
||
|
||
#: resources/data/hints.ini: [hint:Cut Tool]
|
||
msgid ""
|
||
"Cut Tool\n"
|
||
"Did you know that you can cut a model at any angle and position with the "
|
||
"cutting tool?"
|
||
msgstr ""
|
||
"Cut Tool\n"
|
||
"Did you know that you can cut a model at any angle and position with the "
|
||
"cutting tool?"
|
||
|
||
#: resources/data/hints.ini: [hint:Fix Model]
|
||
msgid ""
|
||
"Fix Model\n"
|
||
"Did you know that you can fix a corrupted 3D model to avoid a lot of slicing "
|
||
"problems on the Windows system?"
|
||
msgstr ""
|
||
"Fix Model\n"
|
||
"Did you know that you can fix a corrupted 3D model to avoid a lot of slicing "
|
||
"problems on the Windows system?"
|
||
|
||
#: resources/data/hints.ini: [hint:Timelapse]
|
||
msgid ""
|
||
"Timelapse\n"
|
||
"Did you know that you can generate a timelapse video during each print?"
|
||
msgstr ""
|
||
"Timelapse\n"
|
||
"Did you know that you can generate a timelapse video during each print?"
|
||
|
||
#: resources/data/hints.ini: [hint:Auto-Arrange]
|
||
msgid ""
|
||
"Auto-Arrange\n"
|
||
"Did you know that you can auto-arrange all objects in your project?"
|
||
msgstr ""
|
||
"Auto-Arrange\n"
|
||
"Did you know that you can auto-arrange all objects in your project?"
|
||
|
||
#: resources/data/hints.ini: [hint:Auto-Orient]
|
||
msgid ""
|
||
"Auto-Orient\n"
|
||
"Did you know that you can rotate objects to an optimal orientation for "
|
||
"printing by a simple click?"
|
||
msgstr ""
|
||
"Auto-Orient\n"
|
||
"Did you know that you can rotate objects to an optimal orientation for "
|
||
"printing by a simple click?"
|
||
|
||
#: resources/data/hints.ini: [hint:Lay on Face]
|
||
msgid ""
|
||
"Lay on Face\n"
|
||
"Did you know that you can quickly orient a model so that one of its faces "
|
||
"sits on the print bed? Select the \"Place on face\" function or press the "
|
||
"<b>F</b> key."
|
||
msgstr ""
|
||
"Lay on Face\n"
|
||
"Did you know that you can quickly orient a model so that one of its faces "
|
||
"sits on the print bed? Select the \"Place on face\" function or press the "
|
||
"<b>F</b> key."
|
||
|
||
#: resources/data/hints.ini: [hint:Object List]
|
||
msgid ""
|
||
"Object List\n"
|
||
"Did you know that you can view all objects/parts in a list and change "
|
||
"settings for each object/part?"
|
||
msgstr ""
|
||
"Object List\n"
|
||
"Did you know that you can view all objects/parts in a list and change "
|
||
"settings for each object/part?"
|
||
|
||
#: resources/data/hints.ini: [hint:Simplify Model]
|
||
msgid ""
|
||
"Simplify Model\n"
|
||
"Did you know that you can reduce the number of triangles in a mesh using the "
|
||
"Simplify mesh feature? Right-click the model and select Simplify model. Read "
|
||
"more in the documentation."
|
||
msgstr ""
|
||
"Simplify Model\n"
|
||
"Did you know that you can reduce the number of triangles in a mesh using the "
|
||
"Simplify mesh feature? Right-click the model and select Simplify model. Read "
|
||
"more in the documentation."
|
||
|
||
#: resources/data/hints.ini: [hint:Slicing Parameter Table]
|
||
msgid ""
|
||
"Slicing Parameter Table\n"
|
||
"Did you know that you can view all objects/parts on a table and change "
|
||
"settings for each object/part?"
|
||
msgstr ""
|
||
"Slicing Parameter Table\n"
|
||
"Did you know that you can view all objects/parts on a table and change "
|
||
"settings for each object/part?"
|
||
|
||
#: resources/data/hints.ini: [hint:Split to Objects/Parts]
|
||
msgid ""
|
||
"Split to Objects/Parts\n"
|
||
"Did you know that you can split a big object into small ones for easy "
|
||
"colorizing or printing?"
|
||
msgstr ""
|
||
"Split to Objects/Parts\n"
|
||
"Did you know that you can split a big object into small ones for easy "
|
||
"colorizing or printing?"
|
||
|
||
#: resources/data/hints.ini: [hint:Subtract a Part]
|
||
msgid ""
|
||
"Subtract a Part\n"
|
||
"Did you know that you can subtract one mesh from another using the Negative "
|
||
"part modifier? That way you can, for example, create easily resizable holes "
|
||
"directly in QIDI Studio. Read more in the documentation."
|
||
msgstr ""
|
||
"Subtract a Part\n"
|
||
"Did you know that you can subtract one mesh from another using the Negative "
|
||
"part modifier? That way you can, for example, create easily resizable holes "
|
||
"directly in QIDI Studio. Read more in the documentation."
|
||
|
||
#: resources/data/hints.ini: [hint:STEP]
|
||
msgid ""
|
||
"STEP\n"
|
||
"Did you know that you can improve your print quality by slicing a STEP file "
|
||
"instead of an STL?\n"
|
||
"QIDI Studio supports slicing STEP files, providing smoother results than a "
|
||
"lower resolution STL. Give it a try!"
|
||
msgstr ""
|
||
"STEP\n"
|
||
"Did you know that you can improve your print quality by slicing a STEP file "
|
||
"instead of an STL?\n"
|
||
"QIDI Studio supports slicing STEP files, providing smoother results than a "
|
||
"lower resolution STL. Give it a try!"
|
||
|
||
#: resources/data/hints.ini: [hint:Z seam location]
|
||
msgid ""
|
||
"Z seam location\n"
|
||
"Did you know that you can customize the location of the Z seam, and even "
|
||
"paint it on your print, to have it in a less visible location? This improves "
|
||
"the overall look of your model. Check it out!"
|
||
msgstr ""
|
||
"Z seam location\n"
|
||
"Did you know that you can customize the location of the Z seam, and even "
|
||
"paint it on your print, to have it in a less visible location? This improves "
|
||
"the overall look of your model. Check it out!"
|
||
|
||
#: resources/data/hints.ini: [hint:Fine-tuning for flow rate]
|
||
msgid ""
|
||
"Fine-tuning for flow rate\n"
|
||
"Did you know that flow rate can be fine-tuned for even better-looking "
|
||
"prints? Depending on the material, you can improve the overall finish of the "
|
||
"printed model by doing some fine-tuning."
|
||
msgstr ""
|
||
"Fine-tuning for flow rate\n"
|
||
"Did you know that flow rate can be fine-tuned for even better-looking "
|
||
"prints? Depending on the material, you can improve the overall finish of the "
|
||
"printed model by doing some fine-tuning."
|
||
|
||
#: resources/data/hints.ini: [hint:Split your prints into plates]
|
||
msgid ""
|
||
"Split your prints into plates\n"
|
||
"Did you know that you can split a model that has a lot of parts into "
|
||
"individual plates ready to print? This will simplify the process of keeping "
|
||
"track of all the parts."
|
||
msgstr ""
|
||
"Split your prints into plates\n"
|
||
"Did you know that you can split a model that has a lot of parts into "
|
||
"individual plates ready to print? This will simplify the process of keeping "
|
||
"track of all the parts."
|
||
|
||
#: resources/data/hints.ini: [hint:Speed up your print with Adaptive Layer
|
||
#: Height]
|
||
msgid ""
|
||
"Speed up your print with Adaptive Layer Height\n"
|
||
"Did you know that you can print a model even faster, by using the Adaptive "
|
||
"Layer Height option? Check it out!"
|
||
msgstr ""
|
||
"Speed up your print with Adaptive Layer Height\n"
|
||
"Did you know that you can print a model even faster, by using the Adaptive "
|
||
"Layer Height option? Check it out!"
|
||
|
||
#: resources/data/hints.ini: [hint:Support painting]
|
||
msgid ""
|
||
"Support painting\n"
|
||
"Did you know that you can paint the location of your supports? This feature "
|
||
"makes it easy to place the support material only on the sections of the "
|
||
"model that actually need it."
|
||
msgstr ""
|
||
"Support painting\n"
|
||
"Did you know that you can paint the location of your supports? This feature "
|
||
"makes it easy to place the support material only on the sections of the "
|
||
"model that actually need it."
|
||
|
||
#: resources/data/hints.ini: [hint:Different types of supports]
|
||
msgid ""
|
||
"Different types of supports\n"
|
||
"Did you know that you can choose from multiple types of supports? Tree "
|
||
"supports work great for organic models, while saving filament and improving "
|
||
"print speed. Check them out!"
|
||
msgstr ""
|
||
"Different types of supports\n"
|
||
"Did you know that you can choose from multiple types of supports? Tree "
|
||
"supports work great for organic models, while saving filament and improving "
|
||
"print speed. Check them out!"
|
||
|
||
#: resources/data/hints.ini: [hint:Printing Silk Filament]
|
||
msgid ""
|
||
"Printing Silk Filament\n"
|
||
"Did you know that Silk filament needs special consideration to print it "
|
||
"successfully? Higher temperature and lower speed are always recommended for "
|
||
"the best results."
|
||
msgstr ""
|
||
"Printing Silk Filament\n"
|
||
"Did you know that Silk filament needs special consideration to print it "
|
||
"successfully? Higher temperature and lower speed are always recommended for "
|
||
"the best results."
|
||
|
||
#: resources/data/hints.ini: [hint:Brim for better adhesion]
|
||
msgid ""
|
||
"Brim for better adhesion\n"
|
||
"Did you know that when printing models have a small contact interface with "
|
||
"the printing surface, it's recommended to use a brim?"
|
||
msgstr ""
|
||
"Brim for better adhesion\n"
|
||
"Did you know that when printing models have a small contact interface with "
|
||
"the printing surface, it's recommended to use a brim?"
|
||
|
||
#: resources/data/hints.ini: [hint:Set parameters for multiple objects]
|
||
msgid ""
|
||
"Set parameters for multiple objects\n"
|
||
"Did you know that you can set slicing parameters for all selected objects at "
|
||
"one time?"
|
||
msgstr ""
|
||
"Set parameters for multiple objects\n"
|
||
"Did you know that you can set slicing parameters for all selected objects at "
|
||
"one time?"
|
||
|
||
#: resources/data/hints.ini: [hint:Stack objects]
|
||
msgid ""
|
||
"Stack objects\n"
|
||
"Did you know that you can stack objects as a whole one?"
|
||
msgstr ""
|
||
"Stack objects\n"
|
||
"Did you know that you can stack objects as a whole one?"
|
||
|
||
#: resources/data/hints.ini: [hint:Flush into support/objects/infill]
|
||
msgid ""
|
||
"Flush into support/objects/infill\n"
|
||
"Did you know that you can save the wasted filament by flushing them into "
|
||
"support/objects/infill during filament change?"
|
||
msgstr ""
|
||
"Flush into support/objects/infill\n"
|
||
"Did you know that you can save the wasted filament by flushing them into "
|
||
"support/objects/infill during filament change?"
|
||
|
||
#: resources/data/hints.ini: [hint:Improve strength]
|
||
msgid ""
|
||
"Improve strength\n"
|
||
"Did you know that you can use more wall loops and higher sparse infill "
|
||
"density to improve the strength of the model?"
|
||
msgstr ""
|
||
"Improve strength\n"
|
||
"Did you know that you can use more wall loops and higher sparse infill "
|
||
"density to improve the strength of the model?"
|
||
|
||
#: resources/data/hints.ini: [hint:When need to print with the printer door
|
||
#: opened]
|
||
msgid ""
|
||
"When need to print with the printer door opened\n"
|
||
"Did you know that opening the printer door can reduce the probability of "
|
||
"extruder/hotend clogging when printing lower temperature filament with a "
|
||
"higher enclosure temperature. More info about this in the Wiki."
|
||
msgstr ""
|
||
"When do you need to print with the printer door opened?\n"
|
||
"Did you know that opening the printer door can reduce the probability of "
|
||
"extruder/hotend clogging when printing lower temperature filament with a "
|
||
"higher enclosure temperature? There is more info about this in the Wiki."
|
||
|
||
#: resources/data/hints.ini: [hint:Avoid warping]
|
||
msgid ""
|
||
"Avoid warping\n"
|
||
"Did you know that when printing materials that are prone to warping such as "
|
||
"ABS, appropriately increasing the heatbed temperature can reduce the "
|
||
"probability of warping."
|
||
msgstr ""
|
||
"Avoid warping\n"
|
||
"Did you know that when printing materials that are prone to warping such as "
|
||
"ABS, appropriately increasing the heatbed temperature can reduce the "
|
||
"probability of warping?"
|
||
|
||
#~ msgid "The 3mf is generated by old QIDI Studio, load geometry data only."
|
||
#~ msgstr "The 3mf is generated by old QIDI Studio, load geometry data only."
|
||
|
||
#~ msgid "China"
|
||
#~ msgstr "China"
|
||
|
||
#~ msgid "Tree support brim width"
|
||
#~ msgstr "Tree support brim width"
|
||
|
||
#~ msgid "The brim width around tree support. 0 means auto."
|
||
#~ msgstr "The brim width around tree support. 0 means auto."
|
||
|
||
#~ msgid ""
|
||
#~ "*We recommend you to add brand, materia, type, and even humidity level in "
|
||
#~ "the Name"
|
||
#~ msgstr ""
|
||
#~ "*We recommend you to add brand, materia, type, and even humidity level in "
|
||
#~ "the Name"
|
||
|
||
#~ msgid ""
|
||
#~ "Please find the details of Flow Dynamics Calibration from our wiki.\n"
|
||
#~ "\n"
|
||
#~ "Usually the calibration is unnecessary. When you start a single color/"
|
||
#~ "material print, with the \"flow dynamics calibration\" option checked in "
|
||
#~ "the print start menu, the printer will follow the old way, calibrate the "
|
||
#~ "filament before the print; When you start a multi color/material print, "
|
||
#~ "the printer will use the default compensation parameter for the filament "
|
||
#~ "during every filament switch which will have a good result in most "
|
||
#~ "cases.\n"
|
||
#~ "\n"
|
||
#~ "Please note there are a few cases that will make the calibration result "
|
||
#~ "not reliable: using a texture plate to do the calibration; the build "
|
||
#~ "plate does not have good adhesion (please wash the build plate or apply "
|
||
#~ "gluestick!) ...You can find more from our wiki.\n"
|
||
#~ "\n"
|
||
#~ "The calibration results have about 10 percent jitter in our test, which "
|
||
#~ "may cause the result not exactly the same in each calibration. We are "
|
||
#~ "still investigating the root cause to do improvements with new updates."
|
||
#~ msgstr ""
|
||
#~ "Please find the details of Flow Dynamics Calibration from our wiki.\n"
|
||
#~ "\n"
|
||
#~ "Usually the calibration is unnecessary. When you start a single color/"
|
||
#~ "material print, with the \"flow dynamics calibration\" option checked in "
|
||
#~ "the print start menu, the printer will follow the old way, calibrate the "
|
||
#~ "filament before the print; When you start a multi color/material print, "
|
||
#~ "the printer will use the default compensation parameter for the filament "
|
||
#~ "during every filament switch which will have a good result in most "
|
||
#~ "cases.\n"
|
||
#~ "\n"
|
||
#~ "Please note there are a few cases that will make the calibration result "
|
||
#~ "not reliable: using a texture plate to do the calibration; the build "
|
||
#~ "plate does not have good adhesion (please wash the build plate or apply "
|
||
#~ "gluestick!) ...You can find more from our wiki.\n"
|
||
#~ "\n"
|
||
#~ "The calibration results have about 10 percent jitter in our test, which "
|
||
#~ "may cause the result not exactly the same in each calibration. We are "
|
||
#~ "still investigating the root cause to do improvements with new updates."
|
||
|
||
#~ msgid "Please input a valid value (K in 0~0.3)"
|
||
#~ msgstr "Please input a valid value (K in 0~0.3)"
|
||
|
||
#~ msgid "Please input a valid value (K in 0~0.3, N in 0.6~2.0)"
|
||
#~ msgstr "Please input a valid value (K in 0~0.3, N in 0.6~2.0)"
|
||
|
||
#~ msgid ""
|
||
#~ "The current chamber temperature or the target chamber temperature exceeds "
|
||
#~ "45\\u2103.In order to avoid extruder clogging,low temperature "
|
||
#~ "filament(PLA/PETG/TPU) is not allowed to be loaded."
|
||
#~ msgstr ""
|
||
#~ "The current chamber temperature or the target chamber temperature exceeds "
|
||
#~ "45\\u2103. In order to avoid extruder clogging, low temperature filament "
|
||
#~ "(PLA/PETG/TPU) cannot be loaded."
|
||
|
||
#~ msgid ""
|
||
#~ "Low temperature filament(PLA/PETG/TPU) is loaded in the extruder.In order "
|
||
#~ "to avoid extruder clogging,it is not allowed to set the chamber "
|
||
#~ "temperature above 45\\u2103."
|
||
#~ msgstr ""
|
||
#~ "Low temperature filament(PLA/PETG/TPU) is loaded in the extruder. In "
|
||
#~ "order to avoid extruder clogging, setting the chamber temperature above "
|
||
#~ "45\\u2103 is not allowed."
|
||
|
||
#~ msgid ""
|
||
#~ "When you set the chamber temperature below 40\\u2103, the chamber "
|
||
#~ "temperature control will not be activated. And the target chamber "
|
||
#~ "temperature will automatically be set to 0\\u2103."
|
||
#~ msgstr ""
|
||
#~ "When you set the chamber temperature below 40\\u2103, the chamber "
|
||
#~ "temperature control will not be activated. And the target chamber "
|
||
#~ "temperature will automatically be set to 0\\u2103."
|
||
|
||
#~ msgid "Printer local connection failed, please try again."
|
||
#~ msgstr "Printer local connection failed, please try again."
|
||
|
||
#~ msgid ""
|
||
#~ "Please input valid values:\n"
|
||
#~ "start > 0 \\step >= 0\n"
|
||
#~ "end > start + step)"
|
||
#~ msgstr ""
|
||
#~ "Please input valid values:\n"
|
||
#~ "start > 0 \\step >= 0\n"
|
||
#~ "end > start + step)"
|
||
|
||
#~ msgid ""
|
||
#~ "Please input valid values:\n"
|
||
#~ "start > 10 \\step >= 0\n"
|
||
#~ "end > start + step)"
|
||
#~ msgstr ""
|
||
#~ "Please input valid values:\n"
|
||
#~ "start > 10 \\step >= 0\n"
|
||
#~ "end > start + step)"
|
||
|
||
#~ msgid ""
|
||
#~ "\n"
|
||
#~ "%1% is too close to exclusion area, there will be collisions when "
|
||
#~ "printing."
|
||
#~ msgstr ""
|
||
#~ "\n"
|
||
#~ "%1% is too close to an exclusion area; there will be collisions when "
|
||
#~ "printing."
|
||
|
||
#~ msgid ""
|
||
#~ "%1% is too close to exclusion area, there will be collisions when "
|
||
#~ "printing."
|
||
#~ msgstr ""
|
||
#~ "%1% is too close to an exclusion area; there will be collisions when "
|
||
#~ "printing."
|
||
|
||
#~ msgid "%s is not supported by AMS."
|
||
#~ msgstr "%s is not supported by the AMS."
|
||
|
||
#~ msgid "&Edit"
|
||
#~ msgstr "&Edit"
|
||
|
||
#~ msgid "- \\u2103"
|
||
#~ msgstr "- u2103"
|
||
|
||
#~ msgid "0"
|
||
#~ msgstr "0"
|
||
|
||
#~ msgid "0%"
|
||
#~ msgstr "0%"
|
||
|
||
#~ msgid "1080p"
|
||
#~ msgstr "1080p"
|
||
|
||
#~ msgid "1120x480"
|
||
#~ msgstr "1120x480"
|
||
|
||
#~ msgid "1120x540"
|
||
#~ msgstr "1120x540"
|
||
|
||
#~ msgid "1120x640"
|
||
#~ msgstr "1120x640"
|
||
|
||
#~ msgid "1120x720"
|
||
#~ msgstr "1120x720"
|
||
|
||
#~ msgid "1280x720"
|
||
#~ msgstr "1280x720"
|
||
|
||
#~ msgid "1680x1080"
|
||
#~ msgstr "1680x1080"
|
||
|
||
#~ msgid "1680x720"
|
||
#~ msgstr "1680x720"
|
||
|
||
#~ msgid "1680x840"
|
||
#~ msgstr "1680x840"
|
||
|
||
#~ msgid "1680x960"
|
||
#~ msgstr "1680x960"
|
||
|
||
#~ msgid "1920x1080"
|
||
#~ msgstr "1920x1080"
|
||
|
||
#~ msgid "3D Models"
|
||
#~ msgstr "3D Models"
|
||
|
||
#~ msgid ""
|
||
#~ "3D Scene Operations\n"
|
||
#~ "Did you know how to control view and object/part selection with mouse and "
|
||
#~ "touchpanel in the 3D scene?"
|
||
#~ msgstr ""
|
||
#~ "3D Scene Operations\n"
|
||
#~ "Do you know how to control view and object/part selection with mouse and "
|
||
#~ "touch panel in the 3D scene?"
|
||
|
||
#~ msgid "640x480"
|
||
#~ msgstr "640x480"
|
||
|
||
#~ msgid "720p"
|
||
#~ msgstr "720p"
|
||
|
||
#~ msgid "ABS/ASA"
|
||
#~ msgstr "ABS/ASA"
|
||
|
||
#~ msgid "AMS-Extra"
|
||
#~ msgstr "AMS-Extra"
|
||
|
||
#~ msgid "AMSMaterialsSetting"
|
||
#~ msgstr "AMS Materials Setting"
|
||
|
||
#~ msgid "AMS auto switch filament"
|
||
#~ msgstr "AMS auto switch filament"
|
||
|
||
#~ msgid "AMS settings are not supported for external spool"
|
||
#~ msgstr "Current AMS settings do not support using an external spool."
|
||
|
||
#~ msgid "AWS PRE host"
|
||
#~ msgstr "AWS PRE host"
|
||
|
||
#~ msgid "AWS host"
|
||
#~ msgstr "AWS host"
|
||
|
||
#~ msgid ""
|
||
#~ "A desiccant status lower than two bars indicates that desiccant may be "
|
||
#~ "inactive. Please change the desiccant.(The bars: higher the better.)"
|
||
#~ msgstr ""
|
||
#~ "A desiccant status lower than two bars indicates that desiccant may be "
|
||
#~ "inactive. Please change the desiccant.(The bars: higher the better.)"
|
||
|
||
#~ msgid ""
|
||
#~ "A error occurred. Maybe memory of system is not enough or it's a bug of "
|
||
#~ "the program"
|
||
#~ msgstr ""
|
||
#~ "A error occurred. Maybe memory of system is not enough or it's a bug of "
|
||
#~ "the program"
|
||
|
||
#~ msgid "A problem occured during calibration. Click to view the solution."
|
||
#~ msgstr "A problem occured during calibration. Click to view the solution."
|
||
|
||
#~ msgid "Acivate for better air filtration"
|
||
#~ msgstr "Activate for better air filtration"
|
||
|
||
#~ msgid "Actual Volume = Flushing Volume * Multiplier"
|
||
#~ msgstr "Actual Volume = Flushing Volume * Multiplier"
|
||
|
||
#~ msgid "Adaptive layer height"
|
||
#~ msgstr "Adaptive layer height"
|
||
|
||
#~ msgid "Add/Remove printers"
|
||
#~ msgstr "Add/Remove printers"
|
||
|
||
#~ msgid "Add Custom Printer"
|
||
#~ msgstr "Add Custom Printer"
|
||
|
||
#~ msgid "Alt+Left mouse button"
|
||
#~ msgstr "Alt+Left mouse button"
|
||
|
||
#~ msgid "Ams filament backup"
|
||
#~ msgstr "AMS filament backup"
|
||
|
||
#~ msgid ""
|
||
#~ "An object is layed over the boundary of plate.\n"
|
||
#~ "Please solve the problem by moving it totally inside or outside plate."
|
||
#~ msgstr ""
|
||
#~ "An object is laid over the edge of the plate or exceeds the height "
|
||
#~ "limit.\n"
|
||
#~ "Please solve the problem by moving it totally on or off the plate, and "
|
||
#~ "confirming that the height is within the build volume."
|
||
|
||
#~ msgid ""
|
||
#~ "Arachne engine only works when overhang slowing down is disabled.\n"
|
||
#~ "This may cause decline in the quality of overhang surface when print "
|
||
#~ "fastly"
|
||
#~ msgstr ""
|
||
#~ "The Arachne engine only works when overhang slowdown is disabled.\n"
|
||
#~ "This may cause decline in the quality of overhang surface when printing "
|
||
#~ "quickly."
|
||
|
||
#~ msgid ""
|
||
#~ "Arachne engine only works when overhang slowing down is disabled.\n"
|
||
#~ "This may cause decline in the quality of overhang surface when print "
|
||
#~ "fastly\n"
|
||
#~ msgstr ""
|
||
#~ "The Arachne engine only works when overhang slowdown is disabled.\n"
|
||
#~ "This may cause decline in the quality of overhang surfaces when printing "
|
||
#~ "quickly.\n"
|
||
|
||
#~ msgid "Arrange Options"
|
||
#~ msgstr "Arrange Options"
|
||
|
||
#~ msgid "Arrange options: 0-disable, 1-enable, others-auto"
|
||
#~ msgstr "Arrange options: 0-disable, 1-enable, others-auto"
|
||
|
||
#~ msgid "Assemble the selected parts to a single part"
|
||
#~ msgstr "Assemble the selected parts into a single part"
|
||
|
||
#~ msgid "Associate .3mf files to QIDIStudio"
|
||
#~ msgstr "Associate .3mf files to QIDIStudio"
|
||
|
||
#~ msgid "Associate .step/.stp files to QIDIStudio"
|
||
#~ msgstr "Associate .step/.stp files to QIDI Studio"
|
||
|
||
#~ msgid "Associate .stl files to QIDIStudio"
|
||
#~ msgstr "Associate .stl files to QIDIStudio"
|
||
|
||
#~ msgid "Associate files to QIDIStudio"
|
||
#~ msgstr "Associate files to QIDIStudio"
|
||
|
||
#~ msgid "Auto Bed Type"
|
||
#~ msgstr "Auto Bed Type"
|
||
|
||
#~ msgid "Auto arrange"
|
||
#~ msgstr "Auto Arrange"
|
||
|
||
#~ msgid ""
|
||
#~ "Auto orientates selected objects or all objects.If there are selected "
|
||
#~ "objects, it just orientates the selected ones.Otherwise, it will "
|
||
#~ "orientates all objects in the project."
|
||
#~ msgstr ""
|
||
#~ "This auto orients selected objects or all objects.\n"
|
||
#~ "If there are selected objects, it just orients the selected ones. "
|
||
#~ "Otherwise, it will orient all objects in the project."
|
||
|
||
#~ msgid "Auto refill"
|
||
#~ msgstr "Auto refill"
|
||
|
||
#~ msgid "Aux Cooling"
|
||
#~ msgstr "Aux Cooling"
|
||
|
||
#~ msgid "Auxiliary"
|
||
#~ msgstr "Auxiliary"
|
||
|
||
#~ msgid "Avoid crossing wall when travel"
|
||
#~ msgstr "Avoid walls when traveling"
|
||
|
||
#~ msgid "Backup"
|
||
#~ msgstr "Backup"
|
||
|
||
#~ msgid "Backup interval"
|
||
#~ msgstr "Backup interval"
|
||
|
||
#~ msgid "QIDI High Temperature Plate"
|
||
#~ msgstr "QIDI High Temperature Plate"
|
||
|
||
#~ msgid ""
|
||
#~ "QIDIStudio configuration file may be corrupted and is not abled to be "
|
||
#~ "parsed.Please delete the file and try again."
|
||
#~ msgstr ""
|
||
#~ "QIDIStudio configuration file may be corrupted and is not able to be "
|
||
#~ "parsed. Please delete the file and try again."
|
||
|
||
#~ msgid ""
|
||
#~ "Bed exclude area that can't used as printable area in X-Y plane. For "
|
||
#~ "example, the bottom left area which is used to cut filament in X1 when "
|
||
#~ "printing multi colors with AMS. The area is expressed as polygon by "
|
||
#~ "points in following format: \"XxY, XxY, ...\""
|
||
#~ msgstr ""
|
||
#~ "Bed excludes area that can't used as printable area in the X-Y plane. For "
|
||
#~ "example, the bottom left area which is used to cut filament in X1 when "
|
||
#~ "printing multi-color with an AMS. The area is expressed as polygon by "
|
||
#~ "points in following format: \"XxY, XxY, ...\""
|
||
|
||
#~ msgid "Bed temperature difference"
|
||
#~ msgstr "Bed temperature difference"
|
||
|
||
#~ msgid ""
|
||
#~ "Bed temperature is higher than vitrification temperature of this "
|
||
#~ "filament.\n"
|
||
#~ "This may cause nozzle blocked and printing failure"
|
||
#~ msgstr ""
|
||
#~ "The bed temperature is higher than the vitrification temperature of this "
|
||
#~ "filament.\n"
|
||
#~ "This may cause a nozzle blockage or print failure"
|
||
|
||
#~ msgid ""
|
||
#~ "Bed temperature is higher than vitrification temperature of this "
|
||
#~ "filament.\n"
|
||
#~ "This may cause nozzle blocked and printing failure\n"
|
||
#~ "Please keep the printer open during the printing process to ensure air "
|
||
#~ "circulation or reduce the temperature of the hot bed"
|
||
#~ msgstr ""
|
||
#~ "Bed temperature is higher than vitrification temperature of this "
|
||
#~ "filament.\n"
|
||
#~ "This may cause nozzle blockage and print failure.\n"
|
||
#~ "Please keep the printer open during the printing process to ensure air "
|
||
#~ "circulation or reduce the temperature of the hot bed."
|
||
|
||
#~ msgid ""
|
||
#~ "Bed temperature of other layer is lower than bed temperature of initial "
|
||
#~ "layer for more than %d degree centigrade.\n"
|
||
#~ "This may cause model broken free from build plate during printing"
|
||
#~ msgstr ""
|
||
#~ "The bed temperature of other layers is lower than the bed temperature of "
|
||
#~ "the first layer by more than %d degrees centigrade.\n"
|
||
#~ "This may cause models to break free from the build plate during printing."
|
||
|
||
#~ msgid ""
|
||
#~ "Bed temperature when high temperature plate is installed. Value 0 means "
|
||
#~ "the filament does not support to print on the High Temp Plate"
|
||
#~ msgstr ""
|
||
#~ "This is the bed temperature when the high temperature plate is installed. "
|
||
#~ "A value of 0 means the filament does not support printing on the High "
|
||
#~ "Temp Plate."
|
||
|
||
#~ msgid "Bottom Minimum Shell Thickness"
|
||
#~ msgstr "Bottom minimum shell thickness"
|
||
|
||
#~ msgid "Bottom Solid Layers"
|
||
#~ msgstr "Bottom solid layers"
|
||
|
||
#~ msgid "Cabin humidity"
|
||
#~ msgstr "Cabin humidity"
|
||
|
||
#~ msgid "Cali"
|
||
#~ msgstr "Cali"
|
||
|
||
#~ msgid ""
|
||
#~ "Calibration completed. Please select the factors according to the left "
|
||
#~ "figure and fill them in the input boxes."
|
||
#~ msgstr ""
|
||
#~ "Calibration completed. Please select the factors according to the left "
|
||
#~ "figure and fill them in the input boxes."
|
||
|
||
#~ msgid "Calibration of extrusion"
|
||
#~ msgstr "Calibration of extrusion"
|
||
|
||
#~ msgid "Can't apply when proccess preview."
|
||
#~ msgstr "Unable to apply when processing preview"
|
||
|
||
#~ msgid "Can't connect to the printer"
|
||
#~ msgstr "Can't connect to the printer"
|
||
|
||
#~ msgid ""
|
||
#~ "Cannot detect the LAN IP address of %s. Are %s and QIDI Studio in the "
|
||
#~ "same LAN?"
|
||
#~ msgstr ""
|
||
#~ "Cannot detect the LAN IP address of %s. Are %s and QIDI Studio in the "
|
||
#~ "same LAN?"
|
||
|
||
#~ msgid "Check cloud service status"
|
||
#~ msgstr "Check cloud service status"
|
||
|
||
#~ msgid "Check the normative items."
|
||
#~ msgstr "Check the normative items."
|
||
|
||
#~ msgid ""
|
||
#~ "Choose an AMS slot then press \"Load\" or \"Unload\" button to "
|
||
#~ "automatically load or unload filiament."
|
||
#~ msgstr ""
|
||
#~ "Choose an AMS slot then press \"Load\" or \"Unload\" to automatically "
|
||
#~ "load or unload filament."
|
||
|
||
#~ msgid "Choose one or more files (3mf/step/stl/obj/amf):"
|
||
#~ msgstr "Choose one or more files (3mf/step/stl/obj/amf):"
|
||
|
||
#~ msgid "Choose save directory"
|
||
#~ msgstr "Choose save directory"
|
||
|
||
#~ msgid "Clean"
|
||
#~ msgstr "Clear"
|
||
|
||
#~ msgid "Clear all"
|
||
#~ msgstr "Clear all"
|
||
|
||
#~ msgid ""
|
||
#~ "Clearance radius around extruder. Used as input of auto-arrange to avoid "
|
||
#~ "collision when print object by object"
|
||
#~ msgstr ""
|
||
#~ "Clearance radius around extruder: used as input for auto-arranging to "
|
||
#~ "avoid collisions when printing object by object"
|
||
|
||
#~ msgid "Click the pencil icon to edit the filament."
|
||
#~ msgstr "Click the pencil icon to edit the filament."
|
||
|
||
#~ msgid "Clipping of view"
|
||
#~ msgstr "Clipping of view"
|
||
|
||
#~ msgid "Color Print"
|
||
#~ msgstr "Color print"
|
||
|
||
#~ msgid "Combinate"
|
||
#~ msgstr "Combinate"
|
||
|
||
#~ msgid "Comsumption"
|
||
#~ msgstr "Consumption"
|
||
|
||
#~ msgid "Confirm whether the filament has been extruded"
|
||
#~ msgstr "Confirm whether the filament has been extruded"
|
||
|
||
#~ msgid "Connect failed [%d]!"
|
||
#~ msgstr "Connect failed [%d]!"
|
||
|
||
#~ msgid "Connection lost. Please retry."
|
||
#~ msgstr "Connection lost. Please retry."
|
||
|
||
#~ msgid "Convert Unit"
|
||
#~ msgstr "Convert Unit"
|
||
|
||
#~ msgid "Convert the units of model"
|
||
#~ msgstr "Convert the units of model"
|
||
|
||
#~ msgid "Cool Plate"
|
||
#~ msgstr "Cool Plate/PLA Plate"
|
||
|
||
#~ msgid "Cool plate"
|
||
#~ msgstr "Cool plate"
|
||
|
||
#~ msgid "Creating"
|
||
#~ msgstr "Creating"
|
||
|
||
#~ msgid "Ctrl+Any arrow"
|
||
#~ msgstr "Ctrl+Any arrow"
|
||
|
||
#~ msgid "Ctrl+Left mouse button"
|
||
#~ msgstr "Ctrl+Left mouse button"
|
||
|
||
#~ msgid "Ctrl+Shift+G"
|
||
#~ msgstr "Ctrl+Shift+G"
|
||
|
||
#~ msgid "Ctrl + Any arrow"
|
||
#~ msgstr "Ctrl + Any arrow"
|
||
|
||
#~ msgid "Ctrl + Left mouse button"
|
||
#~ msgstr "Ctrl + Left mouse button"
|
||
|
||
#~ msgid "Ctrl + Shift + Enter"
|
||
#~ msgstr "Ctrl + Shift + Enter"
|
||
|
||
#~ msgid "Debug"
|
||
#~ msgstr "Debug"
|
||
|
||
#~ msgid "Debug level"
|
||
#~ msgstr "Debug level"
|
||
|
||
#~ msgid "Decide whether support activating air filtration"
|
||
#~ msgstr "Decide whether to support activating air filtration"
|
||
|
||
#~ msgid "Delete Pause Print"
|
||
#~ msgstr "Delete Pause Print"
|
||
|
||
#~ msgid "Desiccant status"
|
||
#~ msgstr "Desiccant status"
|
||
|
||
#~ msgid ""
|
||
#~ "Desiccant status lower than two bars indicates that desiccant can be "
|
||
#~ "inactive. Please change the desiccant.(Higher the better)"
|
||
#~ msgstr ""
|
||
#~ "Desiccant status lower than two bars indicates that desiccant can be "
|
||
#~ "inactive. Please change the desiccant. (the higher, the better)"
|
||
|
||
#~ msgid "Designer"
|
||
#~ msgstr "Designer"
|
||
|
||
#~ msgid ""
|
||
#~ "Detect the overhang percentage relative to line width and use different "
|
||
#~ "speed to print. For 100%% overhang, bridge speed is used."
|
||
#~ msgstr ""
|
||
#~ "This detects the overhang percentage relative to line width and uses a "
|
||
#~ "different speed to print. For 100%% overhang, bridging speed is used."
|
||
|
||
#~ msgid ""
|
||
#~ "Detour and avoid to travel across wall which may cause blob on surface"
|
||
#~ msgstr ""
|
||
#~ "Detour and avoid to travel across wall which may cause blob on surface"
|
||
|
||
#~ msgid "Device:"
|
||
#~ msgstr "Device:"
|
||
|
||
#~ msgid ""
|
||
#~ "Disable overhang slowing down automatically? \n"
|
||
#~ "Yes - Enable arachne and disable overhang slowing down\n"
|
||
#~ "No - Give up using arachne this time"
|
||
#~ msgstr ""
|
||
#~ "Disable overhang slowdown automatically? \n"
|
||
#~ "Yes - Enable Arachne and disable overhang slowing down\n"
|
||
#~ "No - Don't use Arachne for this print"
|
||
|
||
#~ msgid "Discard"
|
||
#~ msgstr "Discard"
|
||
|
||
#~ msgid "Discard or Keep changes"
|
||
#~ msgstr "Discard or keep changes"
|
||
|
||
#~ msgid ""
|
||
#~ "Disconnected from printer [%s] due to LAN mode disabled.Please reconnect "
|
||
#~ "the printer by logging in with your user account."
|
||
#~ msgstr ""
|
||
#~ "Disconnected from printer [%s] due to LAN mode being disabled. Please "
|
||
#~ "reconnect the printer by logging in with your user account."
|
||
|
||
#~ msgid ""
|
||
#~ "Disconnected from printer [%s] due to LAN mode enabled.Please reconnect "
|
||
#~ "the printer by inputting Access Code which can be gotten from printer "
|
||
#~ "screen."
|
||
#~ msgstr ""
|
||
#~ "Disconnected from printer [%s] due to LAN mode being enabled. Please "
|
||
#~ "reconnect the printer by inputting the Access Code which can be gotten "
|
||
#~ "from the printer screen."
|
||
|
||
#~ msgid ""
|
||
#~ "Discribe how long the nozzle will move along the last path when retracting"
|
||
#~ msgstr ""
|
||
#~ "This describes how long the nozzle will move along the last path when "
|
||
#~ "retracting."
|
||
|
||
#~ msgid "Display printable box"
|
||
#~ msgstr "Display printable box"
|
||
|
||
#~ msgid "Display shadow of objects"
|
||
#~ msgstr "Display shadow of objects"
|
||
|
||
#~ msgid "Display triangles of models"
|
||
#~ msgstr "Display triangles of models"
|
||
|
||
#~ msgid ""
|
||
#~ "Do not recommand bed temperature of other layer to be lower than initial "
|
||
#~ "layer for more than this threshold. Too low bed temperature of other "
|
||
#~ "layer may cause the model broken free from build plate"
|
||
#~ msgstr ""
|
||
#~ "It is not recommended to have the bed temperature of other layers to be "
|
||
#~ "lower than the first layer by more than this threshold. Bed temperatures "
|
||
#~ "that are too low may cause models to break free from the build plate."
|
||
|
||
#~ msgid ""
|
||
#~ "Do not recommend bed temperature of other layer to be lower than initial "
|
||
#~ "layer for more than this threshold. Too low bed temperature of other "
|
||
#~ "layer may cause the model broken free from build plate"
|
||
#~ msgstr ""
|
||
#~ "It is not recommend for bed temperature of other layers to be lower than "
|
||
#~ "the first layer by more than this threshold. Too low bed temperature of "
|
||
#~ "other layer may cause the model to break free from the build plate."
|
||
|
||
#~ msgid ""
|
||
#~ "Do you want to synchronize your personal data from QIDI Cloud? \n"
|
||
#~ "Contains the following information:\n"
|
||
#~ "1. The Process presets\n"
|
||
#~ "2. The Filament presets\n"
|
||
#~ "3. The Printer presets\n"
|
||
#~ msgstr ""
|
||
#~ "Do you want to synchronize your personal data from QIDI Cloud? \n"
|
||
#~ "This includes the following information:\n"
|
||
#~ "1. Process presets\n"
|
||
#~ "2. Filament presets\n"
|
||
#~ "3. Printer presets\n"
|
||
|
||
#~ msgid ""
|
||
#~ "Do you want to synchronize your personal data from QIDI Cloud? \n"
|
||
#~ "It contains the following information:\n"
|
||
#~ "1. The Process presets\n"
|
||
#~ "2. The Filament presets\n"
|
||
#~ "3. The Printer presets\n"
|
||
#~ msgstr ""
|
||
#~ "Do you want to synchronize your personal data from QIDI Cloud? \n"
|
||
#~ "It contains the following information:\n"
|
||
#~ "1. The Process presets\n"
|
||
#~ "2. The Filament presets\n"
|
||
#~ "3. The Printer presets\n"
|
||
|
||
#~ msgid "Don't remind me of this version again"
|
||
#~ msgstr "Don't remind me about this version again."
|
||
|
||
#~ msgid ""
|
||
#~ "Don't retract when the travel is in infill area absolutely. That means "
|
||
#~ "the oozing can't been seen"
|
||
#~ msgstr ""
|
||
#~ "This disables retraction when travel is entirely within an infill area "
|
||
#~ "and oozing can’t be seen."
|
||
|
||
#~ msgid ""
|
||
#~ "Don't support the whole bridge area which make support very large. Bridge "
|
||
#~ "usually can be printing directly without support if not very long"
|
||
#~ msgstr ""
|
||
#~ "Don't support the whole bridge area which make support very large. Bridge "
|
||
#~ "usually can be printing directly without support if not very long"
|
||
|
||
#~ msgid "Downloading QIDI Network plug-in"
|
||
#~ msgstr "Downloading QIDI Network plug-in"
|
||
|
||
#~ msgid ""
|
||
#~ "Due to ensuer_on_bed, assembly between \n"
|
||
#~ "different objects may not be correct in 3D view.\n"
|
||
#~ " It is recommended to assemble them together."
|
||
#~ msgstr ""
|
||
#~ "Due to ensuer_on_bed, assembly between \n"
|
||
#~ "different objects may not be correct in 3D view.\n"
|
||
#~ " It is recommended to assemble them together."
|
||
|
||
#~ msgid "Dump video"
|
||
#~ msgstr "Dump video"
|
||
|
||
#~ msgid "Edit Pause Print Message"
|
||
#~ msgstr "Edit Pause Print Message"
|
||
|
||
#~ msgid "Edit plate setitngs"
|
||
#~ msgstr "Edit plate settings"
|
||
|
||
#~ msgid ""
|
||
#~ "Embeded\n"
|
||
#~ "depth"
|
||
#~ msgstr "Embedded depth"
|
||
|
||
#~ msgid "Enable Dark mode"
|
||
#~ msgstr "Enable Dark mode"
|
||
|
||
#~ msgid "Enable this if printer support air filtration"
|
||
#~ msgstr "Enable this if your printer supports air filtration"
|
||
|
||
#~ msgid "Enable this if printer support air filtration enhancement"
|
||
#~ msgstr "Enable this if the printer supports air filtration enhancement"
|
||
|
||
#~ msgid ""
|
||
#~ "Enable this option if machine support controlling chamber temperature"
|
||
#~ msgstr ""
|
||
#~ "Enable this option if your machine supports controlling chamber "
|
||
#~ "temperature"
|
||
|
||
#~ msgid ""
|
||
#~ "Enable this option to slow printing speed down to make the final layer "
|
||
#~ "time not shorter than the layer time threshold in \"Max fan speed "
|
||
#~ "threshold\", so that layer can be cooled for longer time. This can "
|
||
#~ "improve the cooling quality for needle and small details"
|
||
#~ msgstr ""
|
||
#~ "Enable this option to slow printing speed down to ensure that the final "
|
||
#~ "layer time is not shorter than the layer time threshold in \"Max fan "
|
||
#~ "speed threshold\", so that the layer can be cooled for a longer time. "
|
||
#~ "This can improve the quality for small details."
|
||
|
||
#~ msgid ""
|
||
#~ "Enable this to get a G-code file which has G2 and G3 moves. And the "
|
||
#~ "fitting tolerance is same with resolution"
|
||
#~ msgstr ""
|
||
#~ "Enable this to get a G-code file which has G2 and G3 moves. And the "
|
||
#~ "fitting tolerance is same with resolution"
|
||
|
||
#~ msgid ""
|
||
#~ "Enabling this option means the height of every layer except the first "
|
||
#~ "will be automatically calculated during slicing according to the slope of "
|
||
#~ "the model’s surface.\n"
|
||
#~ "Note that this option only takes effect if no prime tower is generated in "
|
||
#~ "current plate."
|
||
#~ msgstr ""
|
||
#~ "Enabling this option means that the height of each layer after the first "
|
||
#~ "will be automatically calculated according to the slope of the model’s "
|
||
#~ "surface.\n"
|
||
#~ "Please note that this option only takes effect if there is no prime tower "
|
||
#~ "generated on the current plate."
|
||
|
||
#~ msgid "End of print"
|
||
#~ msgstr "End of print"
|
||
|
||
#~ msgid "Engineering plate"
|
||
#~ msgstr "Engineering plate"
|
||
|
||
#~ msgid "Enter a search term"
|
||
#~ msgstr "Enter a search term"
|
||
|
||
#~ msgid "Entering Seam painting"
|
||
#~ msgstr "Entering seam painting"
|
||
|
||
#~ msgid "Erase painting"
|
||
#~ msgstr "Erase painting"
|
||
|
||
#~ msgid "Error: IP or Access Code are not correct"
|
||
#~ msgstr "Error: IP or Access Code are not correct"
|
||
|
||
#~ msgid "Error at line %1%:\n"
|
||
#~ msgstr "Error at line %1%:\n"
|
||
|
||
#~ msgid "Export."
|
||
#~ msgstr "Export"
|
||
|
||
#~ msgid "Export &Configs"
|
||
#~ msgstr "Export &Configs"
|
||
|
||
#~ msgid "Export 3MF"
|
||
#~ msgstr "Export 3mf"
|
||
|
||
#~ msgid "Export Configs"
|
||
#~ msgstr "Export Configs"
|
||
|
||
#~ msgid "Export G-Code."
|
||
#~ msgstr "Export to G-code"
|
||
|
||
#~ msgid "Export STL"
|
||
#~ msgstr "Export STL"
|
||
|
||
#~ msgid "Export Settings"
|
||
#~ msgstr "Export Settings"
|
||
|
||
#~ msgid "Export Sliced File"
|
||
#~ msgstr "Export Sliced File"
|
||
|
||
#~ msgid "Export all objects as STL"
|
||
#~ msgstr "Export All Objects as STL"
|
||
|
||
#~ msgid "Export as STL"
|
||
#~ msgstr "Export as STL"
|
||
|
||
#~ msgid "Export current Sliced file"
|
||
#~ msgstr "Export Sliced File"
|
||
|
||
#~ msgid "Export ok."
|
||
#~ msgstr "Export ok."
|
||
|
||
#~ msgid "Export project as 3MF."
|
||
#~ msgstr "This exports the project as a 3mf file."
|
||
|
||
#~ msgid "Export settings to a file."
|
||
#~ msgstr "This exports settings to a file."
|
||
|
||
#~ msgid "Export sliced file"
|
||
#~ msgstr "Export Sliced File"
|
||
|
||
#~ msgid "Export slicing data"
|
||
#~ msgstr "Export slicing data"
|
||
|
||
#~ msgid "Export slicing data to a folder."
|
||
#~ msgstr "Export slicing data to a folder"
|
||
|
||
#~ msgid "Export the objects as multiple STL."
|
||
#~ msgstr "Export the objects as multiple STL files."
|
||
|
||
#~ msgid "Extruder position"
|
||
#~ msgstr "Extruder position"
|
||
|
||
#~ msgid ""
|
||
#~ "Extrusion compensation calibration is not supported when using Textured "
|
||
#~ "PEI Plate"
|
||
#~ msgstr ""
|
||
#~ "Extrusion compensation calibration is not supported when using the "
|
||
#~ "Textured PEI Plate."
|
||
|
||
#~ msgid "Factors of dynamic flow cali"
|
||
#~ msgstr "Factors of dynamic flow cali"
|
||
|
||
#~ msgid ""
|
||
#~ "Failed to connect to the printer through LAN. Please enter the correct "
|
||
#~ "printer IP address and access code."
|
||
#~ msgstr ""
|
||
#~ "Failed to connect to the printer through LAN. Please enter the correct "
|
||
#~ "printer IP address and access code."
|
||
|
||
#~ msgid "Failed to fetching model infomations from printer."
|
||
#~ msgstr "Failed to fetch model information from printer"
|
||
|
||
#~ msgid "Failed to get ticket"
|
||
#~ msgstr "Failed to get ticket"
|
||
|
||
#~ msgid "Failed to parse login report reason111"
|
||
#~ msgstr "Failed to parse login report reason"
|
||
|
||
#~ msgid "Failed to parse model infomations."
|
||
#~ msgstr "Failed to parse model information"
|
||
|
||
#~ msgid ""
|
||
#~ "Failed to save the project.\n"
|
||
#~ "Please check whether the folder exists online or if other programs open "
|
||
#~ "the project file."
|
||
#~ msgstr ""
|
||
#~ "Failed to save the project.\n"
|
||
#~ "Please check whether the folder exists online or if other programs open "
|
||
#~ "the project file."
|
||
|
||
#~ msgid "Failed uploading print file"
|
||
#~ msgstr "Failed uploading print file"
|
||
|
||
#~ msgid "Failed uploading print file. Please enter ip address again."
|
||
#~ msgstr "Failed uploading print file. Please enter IP address again."
|
||
|
||
#~ msgid "Failure of bind"
|
||
#~ msgstr "Binding failure"
|
||
|
||
#~ msgid "Failure of printer login"
|
||
#~ msgstr "Printer login failure"
|
||
|
||
#~ msgid "Fatal error, exception catched: %1%"
|
||
#~ msgstr "Fatal error, exception: %1%"
|
||
|
||
#~ msgid "Feed new filament from external spool"
|
||
#~ msgstr "Feed new filament from external spool"
|
||
|
||
#~ msgid "Filament 1"
|
||
#~ msgstr "Filament 1"
|
||
|
||
#~ msgid "Filament N XX"
|
||
#~ msgstr "Filament N XX"
|
||
|
||
#~ msgid "Filament bundle(.qdsflmt)"
|
||
#~ msgstr "Filament bundle(.qdsflmt)"
|
||
|
||
#~ msgid ""
|
||
#~ "Filament index %s does not match the filament in AMS slot %s. Please "
|
||
#~ "update the printer firmware to support AMS slot assignment."
|
||
#~ msgstr ""
|
||
#~ "Filament index %s does not match the filament in AMS slot %s. Please "
|
||
#~ "update the printer firmware to support AMS slot assignment."
|
||
|
||
#~ msgid ""
|
||
#~ "Filament index %s exceeds the number of AMS slots. Please update the "
|
||
#~ "printer firmware to support AMS slot assignment."
|
||
#~ msgstr ""
|
||
#~ "Filament index %s exceeds the number of AMS slots. Please update the "
|
||
#~ "printer firmware to support AMS slot assignment."
|
||
|
||
#~ msgid ""
|
||
#~ "Filament index does not match the filament in AMS slot. Please update the "
|
||
#~ "printer firmware to support AMS slot assignment."
|
||
#~ msgstr ""
|
||
#~ "Filament index does not match the filament in AMS slot. Please update the "
|
||
#~ "printer firmware to support AMS slot assignment."
|
||
|
||
#~ msgid ""
|
||
#~ "Filament index exceeds the number of AMS slots. Please update the printer "
|
||
#~ "firmware to support AMS slot assignment."
|
||
#~ msgstr ""
|
||
#~ "Filament index exceeds the number of AMS slots. Please update the printer "
|
||
#~ "firmware to support AMS slot assignment."
|
||
|
||
#~ msgid ""
|
||
#~ "Filament to print support and raft. \"Default\" means no specific "
|
||
#~ "filament for support and current filament is used"
|
||
#~ msgstr ""
|
||
#~ "Filament to print supports and rafts. \"Default\" means no specific "
|
||
#~ "filament for support and current filament is used"
|
||
|
||
#~ msgid ""
|
||
#~ "Filament to print support and skirt. 0 means no specific filament for "
|
||
#~ "support and current filament is used"
|
||
#~ msgstr ""
|
||
#~ "This is the filament used to print supports and skirts. 0 means no "
|
||
#~ "specific filament for support and the current filament is used."
|
||
|
||
#~ msgid ""
|
||
#~ "Filament to print support interface. 0 means no specific filament for "
|
||
#~ "support interface and current filament is used"
|
||
#~ msgstr ""
|
||
#~ "This is the filament to print support interfaces. 0 means no specific "
|
||
#~ "filament for support interfaces and the current filament is used"
|
||
|
||
#~ msgid "Filaments Auto refill"
|
||
#~ msgstr "Filament Auto-refill"
|
||
|
||
#~ msgid "Filaments Selection"
|
||
#~ msgstr "Filaments selection"
|
||
|
||
#~ msgid "Filaments replace"
|
||
#~ msgstr "Backup Filament"
|
||
|
||
#~ msgid "File not exists."
|
||
#~ msgstr "File not exists."
|
||
|
||
#~ msgid "Filling bed "
|
||
#~ msgstr "Filling bed"
|
||
|
||
#~ msgid ""
|
||
#~ "Fix Model\n"
|
||
#~ "Did you know that you can fix a corrupted 3D model to avoid a lot of "
|
||
#~ "slicing problems?"
|
||
#~ msgstr ""
|
||
#~ "Fix Model\n"
|
||
#~ "Did you know that you can fix a corrupted 3D model to avoid a lot of "
|
||
#~ "slicing problems?"
|
||
|
||
#~ msgid "Fix model locally"
|
||
#~ msgstr "Fix model locally"
|
||
|
||
#~ msgid "Fix model through cloud"
|
||
#~ msgstr "Fix model through cloud"
|
||
|
||
#~ msgid "Flow Calibration"
|
||
#~ msgstr "Flow calibration"
|
||
|
||
#~ msgid "Flushed filament"
|
||
#~ msgstr "Flushed filament"
|
||
|
||
#~ msgid "Flushing volumes: Auto-calculate everytime the color changed."
|
||
#~ msgstr "Flushing volumes: Auto-calculate everytime the color changed."
|
||
|
||
#~ msgid ""
|
||
#~ "Force cooling fan to be specific speed when overhang degree of printed "
|
||
#~ "part exceeds this value. Expressed as percentage which indicides how much "
|
||
#~ "width of the line without support from lower layer"
|
||
#~ msgstr ""
|
||
#~ "This forces the cooling fan to use a specific speed when overhang degrees "
|
||
#~ "of parts exceed the set value. It is expressed as percentage which "
|
||
#~ "indicates how much line is acceptable without support from lower layers."
|
||
|
||
#~ msgid ""
|
||
#~ "Force part cooling fan to be this speed when printing bridge or overhang "
|
||
#~ "wall which has large overhang degree. Forcing cooling for overhang and "
|
||
#~ "bridge can get better quality for these part"
|
||
#~ msgstr ""
|
||
#~ "Force part cooling fan to be this speed when printing bridges or overhang "
|
||
#~ "walls which have a large overhang degree. Forcing cooling for overhangs "
|
||
#~ "and bridges can achieve better quality for these parts."
|
||
|
||
#~ msgid "Fragment Filter"
|
||
#~ msgstr "Fragment Filter"
|
||
|
||
#~ msgid "Fragment area"
|
||
#~ msgstr "Fragment area"
|
||
|
||
#~ msgid "Fragment filter"
|
||
#~ msgstr "Fragment filter"
|
||
|
||
#~ msgid "G-code"
|
||
#~ msgstr "G-code"
|
||
|
||
#~ msgid ""
|
||
#~ "G-code path is genereated after simplifing the contour of model to avoid "
|
||
#~ "too much points and gcode lines in gcode file. Smaller value means higher "
|
||
#~ "resolution and more time to slice"
|
||
#~ msgstr ""
|
||
#~ "G-code path is genereated after simplifing the contour of model to avoid "
|
||
#~ "too much points and gcode lines in gcode file. Smaller value means higher "
|
||
#~ "resolution and more time to slice"
|
||
|
||
#~ msgid ""
|
||
#~ "Green means that AMS humidity is normal, orange represent humidity is "
|
||
#~ "high, red represent humidity is too high.(Hygrometer: lower the better.)"
|
||
#~ msgstr ""
|
||
#~ "Green means that AMS humidity is normal, orange represent humidity is "
|
||
#~ "high, red represent humidity is too high.(Hygrometer: lower the better.)"
|
||
|
||
#~ msgid ""
|
||
#~ "Green means that AMS humidity is normal, orange represents humidity is "
|
||
#~ "high, red represents humidity is too high.(Hygrometer: lower the better.)"
|
||
#~ msgstr ""
|
||
#~ "Green means that AMS humidity is normal, orange represents high humidity, "
|
||
#~ "and red represents overly high humidity. (Hygrometer: lower is better.)"
|
||
|
||
#~ msgid ""
|
||
#~ "Green represents that AMS humidity is normal, orange and red represent "
|
||
#~ "that humidity is too high.(Lower the better)"
|
||
#~ msgstr ""
|
||
#~ "Green represents that AMS humidity is normal, and orange and red "
|
||
#~ "represent that humidity is too high. (the lower, the better)"
|
||
|
||
#~ msgid "HMS"
|
||
#~ msgstr "HMS"
|
||
|
||
#~ msgid "HRC"
|
||
#~ msgstr "HRC"
|
||
|
||
#~ msgid ""
|
||
#~ "Heat the nozzle to target \n"
|
||
#~ "temperature"
|
||
#~ msgstr ""
|
||
#~ "Heat the nozzle to the target \n"
|
||
#~ "temperature"
|
||
|
||
#~ msgid "Heat the nozzle to target temperature"
|
||
#~ msgstr "Heat the nozzle to target temperature"
|
||
|
||
#~ msgid "Height:"
|
||
#~ msgstr "Height:"
|
||
|
||
#~ msgid ""
|
||
#~ "Height of initial layer. Making initial layer height to be thick slightly "
|
||
#~ "can improve build plate adhension"
|
||
#~ msgstr ""
|
||
#~ "Height of initial layer. Making initial layer height to be thick slightly "
|
||
#~ "can improve build plate adhension"
|
||
|
||
#~ msgid ""
|
||
#~ "Height of the clearance cylinder around extruder. Used as input of auto-"
|
||
#~ "arrange to avoid collision when print object by object"
|
||
#~ msgstr ""
|
||
#~ "Height of the clearance cylinder around extruder: used as input for auto-"
|
||
#~ "arranging to avoid collisions when printing object by object"
|
||
|
||
#~ msgid "High Temp Plate"
|
||
#~ msgstr "High Temp Plate"
|
||
|
||
#~ msgid "ID"
|
||
#~ msgstr "ID"
|
||
|
||
#~ msgid "IP"
|
||
#~ msgstr "IP"
|
||
|
||
#~ msgid ""
|
||
#~ "If enable this setting, part cooling fan will never be stoped and will "
|
||
#~ "run at least at minimum speed to reduce the frequency of starting and "
|
||
#~ "stoping"
|
||
#~ msgstr ""
|
||
#~ "Enabling this setting means that part cooling fan will never stop "
|
||
#~ "entirely and will instead run at least at minimum speed to reduce the "
|
||
#~ "frequency of starting and stopping."
|
||
|
||
#~ msgid ""
|
||
#~ "If enabled, a timelapse video will be generated for each print. After "
|
||
#~ "each layer is printed, the toolhead will move to the excess chute, and "
|
||
#~ "then a snapshot is taken with the chamber camera. All of these snapshots "
|
||
#~ "are composed into a timelapse video when printing completes. Since the "
|
||
#~ "melt filament may leak from the nozzle during the process of taking a "
|
||
#~ "snapshot, prime tower is required for nozzle priming."
|
||
#~ msgstr ""
|
||
#~ "If enabled, a timelapse video will be generated for each print. After "
|
||
#~ "each layer is printed, the toolhead will move to the excess chute, and "
|
||
#~ "then a snapshot is taken with the chamber camera. All of these snapshots "
|
||
#~ "are composed into a timelapse video when printing completes. Since the "
|
||
#~ "melted filament may leak from the nozzle during the process of taking a "
|
||
#~ "snapshot, a prime tower is required for nozzle priming."
|
||
|
||
#~ msgid "If enabled, auto-calculate everytime the color changed."
|
||
#~ msgstr "If enabled, auto-calculate every time the color changes."
|
||
|
||
#~ msgid ""
|
||
#~ "If enabled, sets QIDIStudio as default application to open .3mf files"
|
||
#~ msgstr ""
|
||
#~ "If enabled, sets QIDIStudio as default application to open .3mf files"
|
||
|
||
#~ msgid ""
|
||
#~ "If enabled, sets QIDIStudio as default application to open .step files"
|
||
#~ msgstr ""
|
||
#~ "If enabled, sets QIDIStudio as default application to open .step files"
|
||
|
||
#~ msgid ""
|
||
#~ "If enabled, sets QIDIStudio as default application to open .stl files"
|
||
#~ msgstr ""
|
||
#~ "If enabled, sets QIDIStudio as default application to open .stl files"
|
||
|
||
#~ msgid "If enabled, useful hints are displayed at startup."
|
||
#~ msgstr "If enabled, useful hints are displayed at startup."
|
||
|
||
#~ msgid ""
|
||
#~ "If first selected item is a part, the second one should be part in the "
|
||
#~ "same object."
|
||
#~ msgstr ""
|
||
#~ "If first selected item is a part, the second one should be part in the "
|
||
#~ "same object."
|
||
|
||
#~ msgid ""
|
||
#~ "If first selected item is an object, the second one should also be object."
|
||
#~ msgstr ""
|
||
#~ "If first selected item is an object, the second one should also be object."
|
||
|
||
#~ msgid ""
|
||
#~ "If this is enabled, when starting QIDIStudio and another instance of the "
|
||
#~ "same QIDIStudio is already running, that instance will be reactivated "
|
||
#~ "instead."
|
||
#~ msgstr ""
|
||
#~ "If this is enabled, when starting QIDIStudio with another instance of "
|
||
#~ "QIDIStudio already running, that instance will be reactivated instead."
|
||
|
||
#~ msgid "Immediately score"
|
||
#~ msgstr "Immediately score"
|
||
|
||
#~ msgid "Import 3MF/STL/STEP/OBJ/AMF"
|
||
#~ msgstr "Import 3MF/STL/STEP/OBJ/AMF"
|
||
|
||
#~ msgid "Import geometry data from STL/STEP/3MF/OBJ/AMF files."
|
||
#~ msgstr "Import geometry data from STL/STEP/3MF/OBJ/AMF files."
|
||
|
||
#~ msgid "Importing obj occurred an unknown error."
|
||
#~ msgstr "Importing obj occurred an unknown error."
|
||
|
||
#~ msgid "Importing obj with png function is developing."
|
||
#~ msgstr "Importing obj with png function is developing."
|
||
|
||
#~ msgid "In the calibration of extrusion flow"
|
||
#~ msgstr "In the calibration of extrusion flow"
|
||
|
||
#~ msgid "In the calibration of laser scanner"
|
||
#~ msgstr "In the calibration of laser scanner"
|
||
|
||
#~ msgid "Incompatible 3mf"
|
||
#~ msgstr "Incompatible 3mf"
|
||
|
||
#~ msgid "Initialize failed [%d]!"
|
||
#~ msgstr "Initalization failed [%d]!"
|
||
|
||
#~ msgid "Initialize failed (%s)!"
|
||
#~ msgstr "Initialize failed (%s)!"
|
||
|
||
#~ msgid "Initialize failed (Device connection not ready)!"
|
||
#~ msgstr "Initialize failed (Device connection not ready)!"
|
||
|
||
#~ msgid "Initialize failed (Missing LAN ip of printer)!"
|
||
#~ msgstr "Initialize failed (Missing LAN ip of printer)!"
|
||
|
||
#~ msgid "Initialize failed (No Camera Device)!"
|
||
#~ msgstr "Initialize failed (No Camera Device)!"
|
||
|
||
#~ msgid "Initialize failed (No Device)!"
|
||
#~ msgstr "Initialize failed (No Device)!"
|
||
|
||
#~ msgid "Initialize failed (Not accessible in LAN-only mode)!"
|
||
#~ msgstr "Initialize failed (Not accessible in LAN-only mode)!"
|
||
|
||
#~ msgid "Initialize failed (Not supported by printer)!"
|
||
#~ msgstr "Initialization failed (Not supported by printer)!"
|
||
|
||
#~ msgid "Initialize failed (Not supported on the current printer version)!"
|
||
#~ msgstr "Initialize failed (Not supported on the current printer version)!"
|
||
|
||
#~ msgid "Initialize failed (Not supported with LAN-only mode)!"
|
||
#~ msgstr "Initialization failed (Not supported in LAN-only mode)!"
|
||
|
||
#~ msgid "Initialize failed (Not supported without remote video tunnel)!"
|
||
#~ msgstr "Initialization failed (Not supported without remote video tunnel)!"
|
||
|
||
#~ msgid "Inner wall speed"
|
||
#~ msgstr "Inner wall speed"
|
||
|
||
#~ msgid "Invalid nozzle diameter"
|
||
#~ msgstr "Invalid nozzle diameter"
|
||
|
||
#~ msgid ""
|
||
#~ "Invalid state. \n"
|
||
#~ "No one part is selected for keep after cut"
|
||
#~ msgstr ""
|
||
#~ "Invalid state. \n"
|
||
#~ "No one part is selected for keep after cut"
|
||
|
||
#~ msgid ""
|
||
#~ "It seems object %s has completely floating regions. Please re-orient the "
|
||
#~ "object or enable support generation."
|
||
#~ msgstr ""
|
||
#~ "It seems object %s has completely floating regions. Please re-orient the "
|
||
#~ "object or enable support generation."
|
||
|
||
#~ msgid ""
|
||
#~ "It seems object %s has large overhangs. Please enable support generation."
|
||
#~ msgstr ""
|
||
#~ "It seems object %s has large overhangs. Please enable support generation."
|
||
|
||
#~ msgid ""
|
||
#~ "It seems object %s needs support to print. Please enable support "
|
||
#~ "generation."
|
||
#~ msgstr ""
|
||
#~ "It seems object %s needs support to print. Please enable support "
|
||
#~ "generation."
|
||
|
||
#~ msgid "Keep"
|
||
#~ msgstr "Keep"
|
||
|
||
#~ msgid "Keep lower part"
|
||
#~ msgstr "Keep lower part"
|
||
|
||
#~ msgid "Keep only one QIDIStudio instance"
|
||
#~ msgstr "Keep only one QIDIStudio instance"
|
||
|
||
#~ msgid "Keep upper part"
|
||
#~ msgstr "Keep upper part"
|
||
|
||
#~ msgid ""
|
||
#~ "Klipper's max_accel_to_decel will be adjusted to this % of acceleration"
|
||
#~ msgstr ""
|
||
#~ "Klipper's max_accel_to_decel will be adjusted to this % of acceleration."
|
||
|
||
#~ msgid "Layer Time(log): "
|
||
#~ msgstr "Layer Time(log): "
|
||
|
||
#~ msgid "Layer Time (log)"
|
||
#~ msgstr "Layer Time (log)"
|
||
|
||
#~ msgid "Layers: %d/%d"
|
||
#~ msgstr "Layers: %d/%d"
|
||
|
||
#~ msgid "Layers: %s"
|
||
#~ msgstr "Layers: %s"
|
||
|
||
#~ msgid "Layers: N/A"
|
||
#~ msgstr "Layers: N/A"
|
||
|
||
#~ msgid "Layers and Perimeters"
|
||
#~ msgstr "Layers and Perimeters"
|
||
|
||
#~ msgid "Leaving Seam painting"
|
||
#~ msgstr "Leaving Seam Painting"
|
||
|
||
#~ msgid ""
|
||
#~ "Line pattern of internal solid infill. if the detect nattow internal "
|
||
#~ "solid infill be enabled, the concentric pattern will be used for the "
|
||
#~ "small area."
|
||
#~ msgstr ""
|
||
#~ "Line pattern of internal solid infill. if the detect nattow internal "
|
||
#~ "solid infill be enabled, the concentric pattern will be used for the "
|
||
#~ "small area."
|
||
|
||
#~ msgid "Line type"
|
||
#~ msgstr "Line type"
|
||
|
||
#~ msgid "Load Filament Settings"
|
||
#~ msgstr "Load Filament Settings"
|
||
|
||
#~ msgid "Load General Settings"
|
||
#~ msgstr "Load General Settings"
|
||
|
||
#~ msgid "Load cached slicing data from directory"
|
||
#~ msgstr "Load cached slicing data from directory"
|
||
|
||
#~ msgid "Load default filaments"
|
||
#~ msgstr "Load default filaments"
|
||
|
||
#~ msgid "Load failed [%d]"
|
||
#~ msgstr "Load failed [%d]"
|
||
|
||
#~ msgid "Load failed [%d]!"
|
||
#~ msgstr "Load failed [%d]!"
|
||
|
||
#~ msgid "Load filament settings from the specified file list"
|
||
#~ msgstr "Load filament settings from the specified file list"
|
||
|
||
#~ msgid "Load first filament as default for those not loaded"
|
||
#~ msgstr "Load first filament as default for those not loaded"
|
||
|
||
#~ msgid "Load process/machine settings from the specified file"
|
||
#~ msgstr "Load process/machine settings from the specified file"
|
||
|
||
#~ msgid "Load shape from STL..."
|
||
#~ msgstr "Load shape from STL..."
|
||
|
||
#~ msgid "Load slicing data"
|
||
#~ msgstr "Load slicing data"
|
||
|
||
#~ msgid "Loading user presets..."
|
||
#~ msgstr "Loading user presets..."
|
||
|
||
#~ msgid "Lower part"
|
||
#~ msgstr "Lower part"
|
||
|
||
#~ msgid "MC"
|
||
#~ msgstr "MC"
|
||
|
||
#~ msgid "MainBoard"
|
||
#~ msgstr "MainBoard"
|
||
|
||
#~ msgid "Management"
|
||
#~ msgstr "Management"
|
||
|
||
#~ msgid "Manual"
|
||
#~ msgstr "Manual"
|
||
|
||
#~ msgid ""
|
||
#~ "Material becomes soft at this temperature. Thus the heatbed cannot be "
|
||
#~ "hotter than this tempature"
|
||
#~ msgstr ""
|
||
#~ "Material becomes soft at this temperature. Thus, the heat bed cannot be "
|
||
#~ "hotter than this temperature."
|
||
|
||
#~ msgid "Max travel detour distance"
|
||
#~ msgstr "Max travel detour distance"
|
||
|
||
#~ msgid ""
|
||
#~ "Maximum detour distance for avoiding crossing wall. Don't detour if the "
|
||
#~ "detour distance is large than this value"
|
||
#~ msgstr ""
|
||
#~ "Maximum detour distance for avoiding travel across walls. If the distance "
|
||
#~ "is larger than this value, there will be no detour."
|
||
|
||
#~ msgid ""
|
||
#~ "Maximum detour distance for avoiding crossing wall. Don't detour if the "
|
||
#~ "detour distance is large than this value. Detour length could be "
|
||
#~ "specified either as an absolute value or as percentage (for example 50%) "
|
||
#~ "of a direct travel path. Zero to disable"
|
||
#~ msgstr ""
|
||
#~ "Maximum detour distance for avoiding crossing wall. Don't detour if the "
|
||
#~ "detour distance is large than this value. Detour length could be "
|
||
#~ "specified either as an absolute value or as percentage (for example 50%) "
|
||
#~ "of a direct travel path. Zero to disable"
|
||
|
||
#~ msgid "Media"
|
||
#~ msgstr "Media"
|
||
|
||
#~ msgid "Missing LAN ip of printer!"
|
||
#~ msgstr "Missing LAN IP of printer!"
|
||
|
||
#~ msgid "Modify"
|
||
#~ msgstr "Modify"
|
||
|
||
#~ msgid "Module"
|
||
#~ msgstr "Module"
|
||
|
||
#~ msgid "Monitoring"
|
||
#~ msgstr "Monitoring"
|
||
|
||
#~ msgid "Monitoring Recording"
|
||
#~ msgstr "Monitoring Recording"
|
||
|
||
#~ msgid ""
|
||
#~ "Move nozzle along the last extrusion path when retracting to clean leaked "
|
||
#~ "material on nozzle. This can minimize blob when print new part after "
|
||
#~ "travel"
|
||
#~ msgstr ""
|
||
#~ "Move nozzle along the last extrusion path when retracting to clean leaked "
|
||
#~ "material on nozzle. This can minimize blob when print new part after "
|
||
#~ "travel"
|
||
|
||
#~ msgid "NEW DEV host: api-dev.qidilab.net/v1"
|
||
#~ msgstr "NEW DEV host: api-dev.qidilab.net/v1"
|
||
|
||
#~ msgid "NEW PRE host: api-pre.qidilab.net/v1"
|
||
#~ msgstr "NEW PRE host: api-pre.qidilab.net/v1"
|
||
|
||
#~ msgid "NEW QA host: api-qa.qidilab.net/v1"
|
||
#~ msgstr "NEW QA host: api-qa.qidilab.net/v1"
|
||
|
||
#~ msgid "NO AMS"
|
||
#~ msgstr "NO AMS"
|
||
|
||
#~ msgid "New Value"
|
||
#~ msgstr "New Value"
|
||
|
||
#~ msgid "No arrangable objects are selected."
|
||
#~ msgstr "No arrangable objects are selected."
|
||
|
||
#~ msgid "No files [%d]"
|
||
#~ msgstr "No files [%d]"
|
||
|
||
#~ msgid "Normative check"
|
||
#~ msgstr "Normative check"
|
||
|
||
#~ msgid "Not accessible in LAN-only mode!"
|
||
#~ msgstr "Not accessible in LAN-only mode!"
|
||
|
||
#~ msgid "Not for new"
|
||
#~ msgstr "Not for now"
|
||
|
||
#~ msgid "Not supported."
|
||
#~ msgstr "Not supported."
|
||
|
||
#~ msgid "Not supported by this model of printer!"
|
||
#~ msgstr "Not supported by this model of printer!"
|
||
|
||
#~ msgid "Note: The preparation may takes several minutes. Please be patiant."
|
||
#~ msgstr "Note: The preparation may take several minutes. Please be patient."
|
||
|
||
#~ msgid ""
|
||
#~ "Note: When the lid is open or the desiccant pack is changed, it can take "
|
||
#~ "hours or a night to absorb the moisture. Low temperatures also slow down "
|
||
#~ "the process. During this time, the indicator may not represent the "
|
||
#~ "chamber accurately."
|
||
#~ msgstr ""
|
||
#~ "Note: When the lid is open or the desiccant pack is changed, it can take "
|
||
#~ "hours or a night to absorb the moisture. Low temperatures also slow down "
|
||
#~ "the process. During this time, the indicator may not represent the "
|
||
#~ "chamber accurately."
|
||
|
||
#~ msgid ""
|
||
#~ "Note: if new filament is inserted during printing, the AMS will not "
|
||
#~ "automatically read any information until printing is completed."
|
||
#~ msgstr ""
|
||
#~ "Note: if new filament is inserted during printing, the AMS will not "
|
||
#~ "automatically read any information until printing has finished."
|
||
|
||
#~ msgid ""
|
||
#~ "Note : The location of IP and access code on the machine is as follows :"
|
||
#~ msgstr ""
|
||
#~ "Note: The location of IP and access code on the machine is as follows:"
|
||
|
||
#~ msgid "Nozzle HRC"
|
||
#~ msgstr "Nozzle HRC"
|
||
|
||
#~ msgid ""
|
||
#~ "Nozzle may be blocked when the temperature is out of recommended range.\n"
|
||
#~ "Please make sure whether to use the temperature to print.\n"
|
||
#~ "\n"
|
||
#~ msgstr ""
|
||
#~ "The nozzle may become clogged when the temperature is out of the "
|
||
#~ "recommended range.\n"
|
||
#~ "Please make sure whether to use this temperature to print.\n"
|
||
#~ "\n"
|
||
|
||
#~ msgid "Old Value"
|
||
#~ msgstr "Old Value"
|
||
|
||
#~ msgid ""
|
||
#~ "One object has empty initial layer and can't be printed. Please Cut the "
|
||
#~ "bottom or enable supports."
|
||
#~ msgstr ""
|
||
#~ "One object has empty initial layer and can't be printed. Please Cut the "
|
||
#~ "bottom or enable supports."
|
||
|
||
#~ msgid ""
|
||
#~ "Only one of the results with the same name will be saved. Are you sure "
|
||
#~ "you want to overrides the other results?"
|
||
#~ msgstr ""
|
||
#~ "Only one of the results with the same name will be saved. Are you sure "
|
||
#~ "you want to replace the other results?"
|
||
|
||
#~ msgid "Only the object being edit is visible."
|
||
#~ msgstr "Only the object being edited is visible."
|
||
|
||
#~ msgid "Open &PrusaSlicer"
|
||
#~ msgstr "Open &PrusaSlicer"
|
||
|
||
#~ msgid "Open PrusaSlicer"
|
||
#~ msgstr "Open PrusaSlicer"
|
||
|
||
#~ msgid "Orca Tolerance Test"
|
||
#~ msgstr "Orca Tolerance Test"
|
||
|
||
#~ msgid "Order of inner wall/outer wall/infil"
|
||
#~ msgstr "Order of inner wall/outer wall/infill"
|
||
|
||
#~ msgid "Orient the model"
|
||
#~ msgstr "Orient the model"
|
||
|
||
#~ msgid "Output Model Info"
|
||
#~ msgstr "Output Model Info"
|
||
|
||
#~ msgid "Output directory"
|
||
#~ msgstr "Output directory"
|
||
|
||
#~ msgid "Output directory for the exported files."
|
||
#~ msgstr "This is the output directory for exported files."
|
||
|
||
#~ msgid "Output file"
|
||
#~ msgstr "Output file"
|
||
|
||
#~ msgid "Output the model's information."
|
||
#~ msgstr "This outputs the model’s information."
|
||
|
||
#~ msgid ""
|
||
#~ "Over 4 studio/handy are using remote access, you can close some and try "
|
||
#~ "again."
|
||
#~ msgstr ""
|
||
#~ "Over 4 studio/handy instances are using remote access; please close some "
|
||
#~ "and try again."
|
||
|
||
#~ msgid "P1P General Settings - WLAN in the sidebar of the main screen"
|
||
#~ msgstr "P1P General Settings - WLAN in the sidebar of the main screen"
|
||
|
||
#~ msgid "PA-CF"
|
||
#~ msgstr "PA-CF"
|
||
|
||
#~ msgid "PET-CF"
|
||
#~ msgstr "PET-CF"
|
||
|
||
#~ msgid "PETG"
|
||
#~ msgstr "PETG"
|
||
|
||
#~ msgid "PLA"
|
||
#~ msgstr "PLA"
|
||
|
||
#~ msgid "Paint-on seam editing"
|
||
#~ msgstr "Paint-on seam editing"
|
||
|
||
#~ msgid "Part Cooling"
|
||
#~ msgstr "Part Cooling"
|
||
|
||
#~ msgid "Pause(heated bed temperature error)"
|
||
#~ msgstr "Pause(heated bed temperature error)"
|
||
|
||
#~ msgid "Pause(hotend temperature error)"
|
||
#~ msgstr "Pause(hotend temperature error)"
|
||
|
||
#~ msgid "Pause(toolhead shell off)"
|
||
#~ msgstr "Pause(toolhead shell off)"
|
||
|
||
#~ msgid "Pause Print"
|
||
#~ msgstr "Pause Print"
|
||
|
||
#~ msgid "Per object edit"
|
||
#~ msgstr "Per Object Edit"
|
||
|
||
#~ msgid "Plate %d: %s does not support filament %s\n"
|
||
#~ msgstr "Plate %d: %s does not support filament %s\n"
|
||
|
||
#~ msgid "Plate %d: %s does not support filament %s.\n"
|
||
#~ msgstr "Plate %d: %s does not support filament %s.\n"
|
||
|
||
#~ msgid "Plate %d: %s does not support filament %s (%s)."
|
||
#~ msgstr "Plate %d: %s does not support filament %s (%s)."
|
||
|
||
#~ msgid "Plate %d: %s does not support filament %s (%s).\n"
|
||
#~ msgstr "Plate %d: %s does not support filament %s (%s).\n"
|
||
|
||
#~ msgid "Plate type"
|
||
#~ msgstr "Plate type"
|
||
|
||
#~ msgid "Plate types supported by the printer"
|
||
#~ msgstr "Plate types supported by the printer"
|
||
|
||
#~ msgid "Please Fill Task Report."
|
||
#~ msgstr "Please Fill Task Report."
|
||
|
||
#~ msgid ""
|
||
#~ "Please check the following infomation and click Confirm to continue "
|
||
#~ "sending print:"
|
||
#~ msgstr ""
|
||
#~ "Please check the following information and click Confirm to continue "
|
||
#~ "sending the print:"
|
||
|
||
#~ msgid ""
|
||
#~ "Please check the following infomation and click Confirm to continue "
|
||
#~ "sending print:\n"
|
||
#~ msgstr ""
|
||
#~ "Please check the following information and click Confirm to continue "
|
||
#~ "sending print:\n"
|
||
|
||
#~ msgid "Please fill report first."
|
||
#~ msgstr "Please fill report first."
|
||
|
||
#~ msgid "Please find the cornor with perfect degree of extrusion"
|
||
#~ msgstr "Please find the corner with the perfect degree of extrusion"
|
||
|
||
#~ msgid "Please give a score for your favorite QIDI Market model."
|
||
#~ msgstr "Please give a score for your favorite QIDI Market model."
|
||
|
||
#~ msgid ""
|
||
#~ "Please go to filament setting to edit your presets if you need.\n"
|
||
#~ "Please note that nozzle temperature, hot bed temperature, and maximum "
|
||
#~ "volumetric speed have a significant impact on printing quality. Please "
|
||
#~ "set them carefully."
|
||
#~ msgstr ""
|
||
#~ "Please go to filament setting to edit your presets if you need.\n"
|
||
#~ "Please note that nozzle temperature, hot bed temperature, and maximum "
|
||
#~ "volumetric speed have a significant impact on printing quality. Please "
|
||
#~ "set them carefully."
|
||
|
||
#~ msgid "Please heat the nozzle to above 170 degree before loading filament."
|
||
#~ msgstr ""
|
||
#~ "Please heat the nozzle to above 170 degrees before loading filament."
|
||
|
||
#~ msgid "Please input a valid value (K in 0~0.5, N in 0.6~2.0)"
|
||
#~ msgstr "Please input a valid value (K in 0~0.5, N in 0.6~2.0)"
|
||
|
||
#~ msgid "Please input a valid value (K in 0~0.5)"
|
||
#~ msgstr "Please input a valid value (K in 0~0.5)"
|
||
|
||
#~ msgid "Please log out and login to the printer again."
|
||
#~ msgstr "Please log out and login to the printer again."
|
||
|
||
#~ msgid "Please update the printer firmware and try again."
|
||
#~ msgstr "Please update the printer firmware and try again."
|
||
|
||
#~ msgid "Please upgrade your printer first"
|
||
#~ msgstr "Please update your printer first"
|
||
|
||
#~ msgid "Position:"
|
||
#~ msgstr "Position:"
|
||
|
||
#~ msgid "Preset path is not find, please reselect vendor."
|
||
#~ msgstr "Preset path was not found; please reselect vendor."
|
||
|
||
#~ msgid ""
|
||
#~ "Preview only mode:\n"
|
||
#~ "The loaded file contains gcode only."
|
||
#~ msgstr ""
|
||
#~ "Preview only mode:\n"
|
||
#~ "The loaded file contains G-code only."
|
||
|
||
#~ msgid "Preview only mode for gcode file."
|
||
#~ msgstr "Preview only mode for G-code file."
|
||
|
||
#~ msgid ""
|
||
#~ "Prime tower is required by timelapse. Do you want to enable both of them?"
|
||
#~ msgstr ""
|
||
#~ "Prime tower is required by timelapse. Do you want to enable both of them?"
|
||
|
||
#~ msgid ""
|
||
#~ "Prime tower is required by timeplase. Are you sure you want to disable "
|
||
#~ "both of them?"
|
||
#~ msgstr ""
|
||
#~ "Prime tower is required by timeplase. Are you sure you want to disable "
|
||
#~ "both of them?"
|
||
|
||
#~ msgid ""
|
||
#~ "Print a tower to prime material in nozzle after switching to a new "
|
||
#~ "material."
|
||
#~ msgstr ""
|
||
#~ "This option enables printing a tower to prime material in the nozzle "
|
||
#~ "after switching to a new material."
|
||
|
||
#~ msgid "Print file not found, please slice again"
|
||
#~ msgstr "Print file not found; please slice again"
|
||
|
||
#~ msgid "Print sequence of inner wall, outer wall and infill. "
|
||
#~ msgstr "This is the print sequence of inner walls, outer walls, and infill."
|
||
|
||
#~ msgid "Printer Selection"
|
||
#~ msgstr "Printer Selection"
|
||
|
||
#~ msgid ""
|
||
#~ "Printer and all the filament&process presets that belongs to the "
|
||
#~ "printer. \n"
|
||
#~ "Can be shared with others."
|
||
#~ msgstr ""
|
||
#~ "Printer and all the filament&process presets that belongs to the "
|
||
#~ "printer. \n"
|
||
#~ "Can be shared with others."
|
||
|
||
#~ msgid "Printer config bundle(.qdscfg)"
|
||
#~ msgstr "Printer config bundle(.qdscfg)"
|
||
|
||
#~ msgid "Printer firmware does not support material = >ams slot mapping."
|
||
#~ msgstr "Printer firmware does not support material = > AMS slot mapping."
|
||
|
||
#~ msgid ""
|
||
#~ "Printer is busy downloading, Please wait for the downloading to finish."
|
||
#~ msgstr ""
|
||
#~ "Printer is busy downloading, Please wait for the downloading to finish."
|
||
|
||
#~ msgid "Printing List"
|
||
#~ msgstr "Printing list"
|
||
|
||
#~ msgid "Project Inside Preset"
|
||
#~ msgstr "Project Inside Preset"
|
||
|
||
#~ msgid ""
|
||
#~ "Purging after filament change will be done inside objects' infills. This "
|
||
#~ "may lower the amount of waste and decrease the print time. If the walls "
|
||
#~ "are printed with transparent filament, the mixed color infill will be "
|
||
#~ "seen outside"
|
||
#~ msgstr ""
|
||
#~ "Purging after filament change will be done inside objects' infill. This "
|
||
#~ "may lower the amount of waste and decrease the print time. If the walls "
|
||
#~ "are printed with transparent filament, the mixed color infill will be "
|
||
#~ "visible."
|
||
|
||
#~ msgid ""
|
||
#~ "Purging after filament change will be done inside objects' support. This "
|
||
#~ "may lower the amount of waste and decrease the print time"
|
||
#~ msgstr ""
|
||
#~ "Purging after filament change will be done inside objects' support. This "
|
||
#~ "may lower the amount of waste and decrease the print time."
|
||
|
||
#~ msgid ""
|
||
#~ "Push new filament \n"
|
||
#~ "into extruder"
|
||
#~ msgstr ""
|
||
#~ "Push new filament \n"
|
||
#~ "into extruder"
|
||
|
||
#~ msgid "Push new filament into the extruder"
|
||
#~ msgstr "Push new filament into the extruder"
|
||
|
||
#~ msgid "Recommended temperature range"
|
||
#~ msgstr "Recommended temperature range"
|
||
|
||
#~ msgid ""
|
||
#~ "Record timelapse video of printing without showing toolhead. In this mode "
|
||
#~ "the toolhead docks near the excess chute at each layer change, and then a "
|
||
#~ "snapshot is taken with the chamber camera. When printing finishes a "
|
||
#~ "timelapse video is composed of all the snapshots."
|
||
#~ msgstr ""
|
||
#~ "Record timelapse video of printing without showing the toolhead. In this "
|
||
#~ "mode the toolhead docks near the excess chute at each layer change, and "
|
||
#~ "then a snapshot is taken with the chamber camera. When printing finishes, "
|
||
#~ "a timelapse video is created from all the snapshots."
|
||
|
||
#~ msgid "Reduce Triangles"
|
||
#~ msgstr "Reduce Triangles"
|
||
|
||
#~ msgid "Reload item"
|
||
#~ msgstr "Reload item"
|
||
|
||
#~ msgid "Reload items"
|
||
#~ msgstr "Reload items"
|
||
|
||
#~ msgid "Repair"
|
||
#~ msgstr "Repair"
|
||
|
||
#~ msgid "Repair the model's meshes if it is non-manifold mesh"
|
||
#~ msgstr "Repair the model’s meshes if they are non-manifold."
|
||
|
||
#~ msgid "Repetions count"
|
||
#~ msgstr "Repetition count"
|
||
|
||
#~ msgid "Repetions count of the whole model"
|
||
#~ msgstr "Repetition count of the whole model"
|
||
|
||
#~ msgid "Report"
|
||
#~ msgstr "Report"
|
||
|
||
#~ msgid "Resonance frequency identification"
|
||
#~ msgstr "Resonance frequency identification"
|
||
|
||
#~ msgid "Rotation:"
|
||
#~ msgstr "Rotation:"
|
||
|
||
#~ msgid "Save configuration as:"
|
||
#~ msgstr "Save configuration as:"
|
||
|
||
#~ msgid "Scale the model by a float factor"
|
||
#~ msgstr "Scale the model by a float factor"
|
||
|
||
#~ msgid "Score"
|
||
#~ msgstr "Score"
|
||
|
||
#~ msgid "Select Bed Type"
|
||
#~ msgstr "Select Plate Type"
|
||
|
||
#~ msgid "Send progress to pipe"
|
||
#~ msgstr "Send progress to pipe"
|
||
|
||
#~ msgid "Send progress to pipe."
|
||
#~ msgstr "Send progress to pipe."
|
||
|
||
#~ msgid "Send to Printer failed. Please try again."
|
||
#~ msgstr "Send to Printer failed. Please try again."
|
||
|
||
#~ msgid "Sending gcode file through cloud service"
|
||
#~ msgstr "Sending G-code file through cloud service"
|
||
|
||
#~ msgid "Set Printable"
|
||
#~ msgstr "Set Printable"
|
||
|
||
#~ msgid "Set Unprintable"
|
||
#~ msgstr "Set Unprintable"
|
||
|
||
#~ msgid "Set pen size"
|
||
#~ msgstr "Set pen size"
|
||
|
||
#~ msgid ""
|
||
#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:"
|
||
#~ "trace\n"
|
||
#~ msgstr ""
|
||
#~ "Sets debug logging level. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:"
|
||
#~ "trace\n"
|
||
|
||
#~ msgid "Share"
|
||
#~ msgstr "Share"
|
||
|
||
#~ msgid "Shift + Any arrow"
|
||
#~ msgstr "Shift + Any arrow"
|
||
|
||
#~ msgid "Shift + Mouse move up or dowm"
|
||
#~ msgstr "Shift + Mouse move up or down"
|
||
|
||
#~ msgid "Shift + Mouse wheel"
|
||
#~ msgstr "Shift + Mouse wheel"
|
||
|
||
#~ msgid "Show \"Tip of the day\" notification after start"
|
||
#~ msgstr "Show \"Tip of the day\" notification after start"
|
||
|
||
#~ msgid "Show Log"
|
||
#~ msgstr "Show Log"
|
||
|
||
#~ msgid "Show Model Mesh(TODO)"
|
||
#~ msgstr "Show Model Mesh(TODO)"
|
||
|
||
#~ msgid "Show Model Shadow(TODO)"
|
||
#~ msgstr "Show Model Shadow(TODO)"
|
||
|
||
#~ msgid "Show Printable Box(TODO)"
|
||
#~ msgstr "Show Printable Box(TODO)"
|
||
|
||
#~ msgid "Show command help."
|
||
#~ msgstr "This shows command help."
|
||
|
||
#~ msgid "Skip Objects"
|
||
#~ msgstr "Skip Objects"
|
||
|
||
#~ msgid "Skip some objects in this print"
|
||
#~ msgstr "Skip some objects in this print"
|
||
|
||
#~ msgid "Slice"
|
||
#~ msgstr "Slice"
|
||
|
||
#~ msgid "Slice the plates: 0-all plates, i-plate i, others-invalid"
|
||
#~ msgstr "Slice the plates: 0-all plates, i-plate i, others-invalid"
|
||
|
||
#~ msgid "Spaghetti Detection"
|
||
#~ msgstr "Spaghetti Detection"
|
||
|
||
#~ msgid "Spaghetti and Excess Chute Pileup Detection"
|
||
#~ msgstr "Spaghetti and Excess Chute Pileup Detection"
|
||
|
||
#~ msgid ""
|
||
#~ "Speed for reloading filament into extruder. Zero means same speed with "
|
||
#~ "retraction"
|
||
#~ msgstr ""
|
||
#~ "Speed for reloading filament into extruder. Zero means same speed with "
|
||
#~ "retraction"
|
||
|
||
#~ msgid ""
|
||
#~ "Speed of auxiliary part cooling fan. Auxiliary fan will run at this speed "
|
||
#~ "during printing except the first several layers which is defined by no "
|
||
#~ "cooling layers"
|
||
#~ msgstr ""
|
||
#~ "This is the speed of auxiliary part cooling fan. The auxiliary fan will "
|
||
#~ "run at this speed during printing except for during the first several "
|
||
#~ "layers which may be set to have no part cooling."
|
||
|
||
#~ msgid "Speed of exhuast fan before printing completes"
|
||
#~ msgstr "Speed of exhaust fan before printing completes"
|
||
|
||
#~ msgid ""
|
||
#~ "Speed of exhuast fan during printing.This speed will overwrite the speed "
|
||
#~ "in filament custom gcode"
|
||
#~ msgstr ""
|
||
#~ "Speed of exhuast fan during printing.This speed will overwrite the speed "
|
||
#~ "in filament custom gcode"
|
||
|
||
#~ msgid "Spiral mode"
|
||
#~ msgstr "Spiral/Vase mode"
|
||
|
||
#~ msgid ""
|
||
#~ "Spiral mode only works when wall loops is 1, \n"
|
||
#~ "support is disabled, top shell layers is 0 and sparse infill density is "
|
||
#~ "0\n"
|
||
#~ msgstr ""
|
||
#~ "Spiral (vase) mode only works when wall loops is set to 1, \n"
|
||
#~ "support is disabled, top shell layers is 0, and sparse infill density is "
|
||
#~ "0\n"
|
||
|
||
#~ msgid ""
|
||
#~ "Spiral mode only works when wall loops is 1, support is disabled, top "
|
||
#~ "shell layers is 0, sparse infill density is 0 and timelapse type is "
|
||
#~ "traditional"
|
||
#~ msgstr ""
|
||
#~ "Spiral mode only works when wall loops is 1, support is disabled, top "
|
||
#~ "shell layers is 0, sparse infill density is 0 and timelapse type is "
|
||
#~ "traditional"
|
||
|
||
#~ msgid "Split the selected object into mutiple objects"
|
||
#~ msgstr "Split the selected object into mutiple objects"
|
||
|
||
#~ msgid "Split the selected object into mutiple parts"
|
||
#~ msgstr "Split the selected object into mutiple parts"
|
||
|
||
#~ msgid "Start"
|
||
#~ msgstr "Start"
|
||
|
||
#~ msgid "Stop printing when Spaghetti or Excess Chute Pileup is detected"
|
||
#~ msgstr "Stop printing when Spaghetti or Excess Chute Pileup is detected"
|
||
|
||
#~ msgid "Stop printing when spaghetti detected"
|
||
#~ msgstr "Stop printing when spaghetti is detected"
|
||
|
||
#~ msgid "Stopped [%d]!"
|
||
#~ msgstr "Stopped [%d]!"
|
||
|
||
#~ msgid "Storage unavailable, insert SD card."
|
||
#~ msgstr "Storage unavailable, insert Micro SD card."
|
||
|
||
#~ msgid ""
|
||
#~ "Studio would re-calculate your flushing volumes everytime the filaments "
|
||
#~ "color changed. You could disable the auto-calculate in QIDI Studio > "
|
||
#~ "Preferences"
|
||
#~ msgstr ""
|
||
#~ "Studio will re-calculate your flushing volumes every time the filament "
|
||
#~ "color changes. You can disable auto-calculate in QIDI Studio > Preferences"
|
||
|
||
#~ msgid ""
|
||
#~ "Style and shape of the support. For normal support, projecting the "
|
||
#~ "supports into a regular grid will create more stable supports (default), "
|
||
#~ "while snug support towers will save material and reduce object scarring.\n"
|
||
#~ "For tree support, slim style will merge branches more aggressively and "
|
||
#~ "save a lot of material (default), while hybrid style will create similar "
|
||
#~ "structure to normal support under large flat overhangs."
|
||
#~ msgstr ""
|
||
#~ "Style and shape of the support. For normal support, projecting the "
|
||
#~ "supports into a regular grid will create more stable supports (default), "
|
||
#~ "while snug support towers will save material and reduce object scarring.\n"
|
||
#~ "For tree support, slim style will merge branches more aggressively and "
|
||
#~ "save a lot of material (default), while hybrid style will create similar "
|
||
#~ "structure to normal support under large flat overhangs."
|
||
|
||
#~ msgid "Succeed to export G-code to %1%"
|
||
#~ msgstr "Succeed to export G-code to %1%"
|
||
|
||
#~ msgid "Successfully sent.Will automatically jump to the device page in %s s"
|
||
#~ msgstr ""
|
||
#~ "Successfully sent. Will automatically jump to the device page in %s s"
|
||
|
||
#~ msgid ""
|
||
#~ "Successfully sent. Will automatically jump to the device page in %s s"
|
||
#~ msgstr ""
|
||
#~ "Successfully sent. Will automatically jump to the device page in %s s"
|
||
|
||
#~ msgid "Suggestion: Actual Volume in range [%d, %d]"
|
||
#~ msgstr "Suggestion: Actual Volume in range [%d, %d]"
|
||
|
||
#~ msgid "Support: detect overhangs"
|
||
#~ msgstr "Support: detect overhangs"
|
||
|
||
#~ msgid "Support: draw polygons"
|
||
#~ msgstr "Support: draw polygons"
|
||
|
||
#~ msgid "Support: fix holes at layer %d"
|
||
#~ msgstr "Support: fix holes at layer %d"
|
||
|
||
#~ msgid "Support: generate contact points"
|
||
#~ msgstr "Support: generate contact points"
|
||
|
||
#~ msgid "Support: generate polygons at layer %d"
|
||
#~ msgstr "Support: generate polygons at layer %d"
|
||
|
||
#~ msgid "Support: generate toolpath"
|
||
#~ msgstr "Support: generate toolpath"
|
||
|
||
#~ msgid "Support: generate toolpath at layer %d"
|
||
#~ msgstr "Support: generate toolpath at layer %d"
|
||
|
||
#~ msgid "Support: precalculate avoidance"
|
||
#~ msgstr "Support: precalculate avoidance"
|
||
|
||
#~ msgid "Support: propagate branches"
|
||
#~ msgstr "Support: propagate branches"
|
||
|
||
#~ msgid "Support: propagate branches at layer %d"
|
||
#~ msgstr "Support: propagate branches at layer %d"
|
||
|
||
#~ msgid "Support air filtration"
|
||
#~ msgstr "Support air filtration"
|
||
|
||
#~ msgid "Support base"
|
||
#~ msgstr "Support base"
|
||
|
||
#~ msgid ""
|
||
#~ "Support layer uses layer height independent with object layer. This is to "
|
||
#~ "support custom support gap,but may cause extra filament switches if "
|
||
#~ "support is specified as different extruder with object"
|
||
#~ msgstr ""
|
||
#~ "The support layer uses layer height independent of object layers. This is "
|
||
#~ "to support custom support gaps, but may cause extra filament switches if "
|
||
#~ "support is specified as a different filament from the object."
|
||
|
||
#~ msgid ""
|
||
#~ "Support layer uses layer height independent with object layer. This is to "
|
||
#~ "support customizing z-gap and save print time."
|
||
#~ msgstr ""
|
||
#~ "Support layer uses layer height independent with object layer. This is to "
|
||
#~ "support customizing z-gap and save print time."
|
||
|
||
#~ msgid "Switch table page"
|
||
#~ msgstr "Switch table page"
|
||
|
||
#~ msgid ""
|
||
#~ "Switch to rectilinear pattern?\n"
|
||
#~ "Yes - switch to rectilinear pattern automaticlly\n"
|
||
#~ "No - reset density to default non 100% value automaticlly"
|
||
#~ msgstr ""
|
||
#~ "Switch to rectilinear pattern?\n"
|
||
#~ "Yes - switch to rectilinear pattern automaticlly\n"
|
||
#~ "No - reset density to default non 100% value automaticlly"
|
||
|
||
#~ msgid ""
|
||
#~ "Switch to rectilinear pattern?\n"
|
||
#~ "Yes - switch to rectilinear pattern automaticlly\n"
|
||
#~ "No - reset density to default non 100% value automaticlly\n"
|
||
#~ msgstr ""
|
||
#~ "Switch to rectilinear pattern?\n"
|
||
#~ "Yes - switch to rectilinear pattern automaticlly\n"
|
||
#~ "No - reset density to default non 100% value automaticlly\n"
|
||
|
||
#~ msgid ""
|
||
#~ "Switch to zig-zag pattern?\n"
|
||
#~ "Yes - switch to zig-zag pattern automaticlly\n"
|
||
#~ "No - reset density to default non 100% value automaticlly\n"
|
||
#~ msgstr ""
|
||
#~ "Switch to zig-zag pattern?\n"
|
||
#~ "Yes - Switch to zig-zag pattern automatically\n"
|
||
#~ "No - Reset density to default non-100% value automatically\n"
|
||
|
||
#~ msgid "Swith cloud environment, Please login again!"
|
||
#~ msgstr "Cloud environment has switched; please login again!"
|
||
|
||
#~ msgid "Sync material list from AMS"
|
||
#~ msgstr "Sync material list from AMS"
|
||
|
||
#~ msgid "TH"
|
||
#~ msgstr "TH"
|
||
|
||
#~ msgid "TPU"
|
||
#~ msgstr "TPU"
|
||
|
||
#~ msgid "Target chamber temperature"
|
||
#~ msgstr "Target chamber temperature"
|
||
|
||
#~ msgid "Temperature of vitrificaiton"
|
||
#~ msgstr "Temperature of vitrification"
|
||
|
||
#~ msgid ""
|
||
#~ "Thank you for purchasing a QIDI Lab device.Before using your QIDI Lab "
|
||
#~ "device, please read the termsand conditions.By clicking to agree to use "
|
||
#~ "your QIDI Lab device, you agree to abide by the Privacy Policyand Terms "
|
||
#~ "of Use(collectively, the \"Terms\"). If you do not comply with or agree "
|
||
#~ "to the QIDI Lab Privacy Policy, please do not use QIDI Lab equipment and "
|
||
#~ "services."
|
||
#~ msgstr ""
|
||
#~ "Thank you for purchasing a QIDI Lab device.Before using your QIDI Lab "
|
||
#~ "device, please read the termsand conditions.By clicking to agree to use "
|
||
#~ "your QIDI Lab device, you agree to abide by the Privacy Policyand Terms "
|
||
#~ "of Use(collectively, the \"Terms\"). If you do not comply with or agree "
|
||
#~ "to the QIDI Lab Privacy Policy, please do not use QIDI Lab equipment and "
|
||
#~ "services."
|
||
|
||
#~ msgid "The %s filament is too soft to be used with the AMS"
|
||
#~ msgstr "The %s filament is too soft to be used with the AMS"
|
||
|
||
#~ msgid ""
|
||
#~ "The 3mf's version %s is newer than %s's version %s, Found following keys "
|
||
#~ "unrecognized:"
|
||
#~ msgstr ""
|
||
#~ "The 3mf's version %s is newer than %s's version %s, Found following keys "
|
||
#~ "unrecognized:"
|
||
|
||
#~ msgid ""
|
||
#~ "The 3mf's version %s is newer than %s's version %s, Found following keys "
|
||
#~ "unrecognized:\n"
|
||
#~ msgstr ""
|
||
#~ "The 3mf file's version %s is newer than %s's version %s, Found the "
|
||
#~ "following unrecognized keys:\n"
|
||
|
||
#~ msgid ""
|
||
#~ "The 3mf's version %s is newer than %s's version %s, Suggest to upgrade "
|
||
#~ "your software."
|
||
#~ msgstr ""
|
||
#~ "The 3mf's version %s is newer than %s's version %s, Suggest to upgrade "
|
||
#~ "your software."
|
||
|
||
#~ msgid ""
|
||
#~ "The 3mf's version %s is newer than %s's version %s, Suggest to upgrade "
|
||
#~ "your software.\n"
|
||
#~ msgstr ""
|
||
#~ "The 3mf's version %s is newer than %s's version %s; it is suggested to "
|
||
#~ "update your software.\n"
|
||
|
||
#~ msgid "The 3mf is not compatible, load geometry data only!"
|
||
#~ msgstr "The 3mf is not compatible, loading geometry data only!"
|
||
|
||
#~ msgid "The 3mf is not from QIDI lab, load geometry data only."
|
||
#~ msgstr "The 3mf is not from QIDI lab, loading geometry data only."
|
||
|
||
#~ msgid "The Config is not compatible and can not be loaded."
|
||
#~ msgstr "The configuration is not compatible and cannot be loaded!"
|
||
|
||
#~ msgid ""
|
||
#~ "The P1P printer does not support smooth timelapse, use traditional "
|
||
#~ "timelapse instead."
|
||
#~ msgstr ""
|
||
#~ "The P1P printer does not support smooth timelapse, please use traditional "
|
||
#~ "timelapse instead."
|
||
|
||
#~ msgid ""
|
||
#~ "The .gcode.3mf file contains no G-code data.Please slice it whthQIDI "
|
||
#~ "Studio and export a new .gcode.3mf file."
|
||
#~ msgstr ""
|
||
#~ "The .gcode.3mf file contains no G-code data.Please slice it whthQIDI "
|
||
#~ "Studio and export a new .gcode.3mf file."
|
||
|
||
#~ msgid ""
|
||
#~ "The average diatance between the random points introducded on each line "
|
||
#~ "segment"
|
||
#~ msgstr ""
|
||
#~ "The average distance between the random points introduced on each line "
|
||
#~ "segment"
|
||
|
||
#~ msgid ""
|
||
#~ "The bed temperature exceeds filament's vitrification temperature. Please "
|
||
#~ "open the front door of printer before printing to avoid nozzle clog."
|
||
#~ msgstr ""
|
||
#~ "The bed temperature exceeds filament's vitrification temperature. Please "
|
||
#~ "open the front door of printer before printing to avoid nozzle clogs."
|
||
|
||
#~ msgid "The configuration package is changed in previous Config Guide"
|
||
#~ msgstr "The configuration package is changed in previous Config Guide"
|
||
|
||
#~ msgid ""
|
||
#~ "The firmware versions of printer and AMS are too low.Please update to the "
|
||
#~ "latest version before sending the print job"
|
||
#~ msgstr ""
|
||
#~ "The firmware versions of the printer and AMS are too low. Please update "
|
||
#~ "them to the latest version before sending any print jobs."
|
||
|
||
#~ msgid ""
|
||
#~ "The flush volume is less than the minimum value and will be automatically "
|
||
#~ "set to the minimum value."
|
||
#~ msgstr ""
|
||
#~ "The flush volume is less than the minimum value and will be automatically "
|
||
#~ "set to the minimum value."
|
||
|
||
#~ msgid ""
|
||
#~ "The following object(s) have empty initial layer and can't be printed. "
|
||
#~ "Please Cut the bottom or enable supports."
|
||
#~ msgstr ""
|
||
#~ "The following object(s) have empty initial layer and can't be printed. "
|
||
#~ "Please Cut the bottom or enable supports."
|
||
|
||
#~ msgid ""
|
||
#~ "The largest printable layer height for extruder. Used tp limits the "
|
||
#~ "maximum layer hight when enable adaptive layer height"
|
||
#~ msgstr ""
|
||
#~ "The largest printable layer height for extruder. Used tp limits the "
|
||
#~ "maximum layer hight when enable adaptive layer height"
|
||
|
||
#~ msgid ""
|
||
#~ "The lowest printable layer height for extruder. Used tp limits the "
|
||
#~ "minimum layer hight when enable adaptive layer height"
|
||
#~ msgstr ""
|
||
#~ "The lowest printable layer height for the extruder. This is used to limit "
|
||
#~ "the minimum layer height when adaptive layer height is enabled."
|
||
|
||
#~ msgid ""
|
||
#~ "The model has overlapping or self-intersecting facets. I tried to repair "
|
||
#~ "it, however you might want to check the results or repair the input file "
|
||
#~ "and retry."
|
||
#~ msgstr ""
|
||
#~ "The model has overlapping or self-intersecting facets. Repair was "
|
||
#~ "attempted, however we recommend checking the results or repairing the "
|
||
#~ "input file and retrying."
|
||
|
||
#~ msgid ""
|
||
#~ "The nozzle's hardness. Zero means no checking for nozzle's hardness "
|
||
#~ "during slicing."
|
||
#~ msgstr ""
|
||
#~ "The nozzle's hardness. Zero means no checking for nozzle hardness during "
|
||
#~ "slicing."
|
||
|
||
#~ msgid ""
|
||
#~ "The number of bottom solid layers is increased when slicing if the "
|
||
#~ "thickness calculated by bottom shell layers is thinner than this value. "
|
||
#~ "This can avoid having too thin shell when layer height is small. 0 means "
|
||
#~ "that this setting is disabled and thickness of bottom shell is absolutely "
|
||
#~ "determained by bottom shell layers"
|
||
#~ msgstr ""
|
||
#~ "The number of bottom solid layers is increased when slicing if the "
|
||
#~ "thickness calculated by bottom shell layers is thinner than this value. "
|
||
#~ "This can avoid having too thin a shell when layer height is small. 0 "
|
||
#~ "means that this setting is disabled and the thickness of the bottom shell "
|
||
#~ "is determined simply by the number of bottom shell layers."
|
||
|
||
#~ msgid ""
|
||
#~ "The prime tower requires that support has the same layer height with "
|
||
#~ "object."
|
||
#~ msgstr ""
|
||
#~ "The prime tower requires that support has the same layer height with "
|
||
#~ "object."
|
||
|
||
#~ msgid ""
|
||
#~ "The print file exceeds the maximum allowable size (1GB). Please simplify "
|
||
#~ "the model and slice again"
|
||
#~ msgstr ""
|
||
#~ "The print file exceeds the maximum allowable size (1GB). Please simplify "
|
||
#~ "the model and slice again"
|
||
|
||
#~ msgid ""
|
||
#~ "The printer type used to generate G-code is not the same type as the "
|
||
#~ "currently selected physical printer. It is recommend to re-slice by "
|
||
#~ "selecting the same printer type."
|
||
#~ msgstr ""
|
||
#~ "The printer type used to generate G-code is not the same type as the "
|
||
#~ "currently selected physical printer. It is recommend to re-slice after "
|
||
#~ "selecting the correct printer type."
|
||
|
||
#~ msgid ""
|
||
#~ "The printer type used to generate G-code is not the same type as the "
|
||
#~ "currently selected physical printer. It is recommend to re-slice by "
|
||
#~ "selecting the same printer type.\n"
|
||
#~ msgstr ""
|
||
#~ "The printer type used to generate G-code is not the same type as the "
|
||
#~ "currently selected physical printer. It is recommend to re-slice by "
|
||
#~ "selecting the same printer type.\n"
|
||
|
||
#~ msgid ""
|
||
#~ "The recommended minimum temperature cannot be higher than the recommended "
|
||
#~ "minimum temperature.\n"
|
||
#~ msgstr ""
|
||
#~ "The recommended minimum temperature cannot be higher than the recommended "
|
||
#~ "minimum temperature.\n"
|
||
|
||
#~ msgid "The region parameter is incorrrect"
|
||
#~ msgstr "The region parameter is incorrrect."
|
||
|
||
#~ msgid "The selected preset: %1% is not found."
|
||
#~ msgstr "The selected preset: %1% was not found."
|
||
|
||
#~ msgid "The start and end points which is from cutter area to garbage can."
|
||
#~ msgstr "The start and end points which is from cutter area to garbage can."
|
||
|
||
#~ msgid "The target object contains only one part and can not be splited."
|
||
#~ msgstr "The target object contains only one part and can not be splited."
|
||
|
||
#~ msgid ""
|
||
#~ "The version of QIDI studio is too low and needs to be updated to the "
|
||
#~ "latest version before it can be used normally"
|
||
#~ msgstr ""
|
||
#~ "The version of QIDI Studio is too low and needs to be updated to the "
|
||
#~ "latest version before it can be used normally"
|
||
|
||
#~ msgid ""
|
||
#~ "There are currently no identical spare consumables available, and "
|
||
#~ "automatic replenishment is currently not possible. \n"
|
||
#~ "(Currently supporting automatic supply of consumables with the same "
|
||
#~ "brand, material type, and color)"
|
||
#~ msgstr ""
|
||
#~ "There are currently no identical spare consumables available, so "
|
||
#~ "automatic replenishment is currently not possible. \n"
|
||
#~ "(We currently support automatic supply of consumables with the same "
|
||
#~ "brand, material type, and color.)"
|
||
|
||
#~ msgid ""
|
||
#~ "There are some unknown filaments mapped to generic preset. Please update "
|
||
#~ "QIDI Studio or restart QIDI Studio to check if there is an update to "
|
||
#~ "system presets."
|
||
#~ msgstr ""
|
||
#~ "There are some unknown filaments mapped to generic presets. Please update "
|
||
#~ "QIDI Studio or restart QIDI Studio to check if there is an update to "
|
||
#~ "system presets."
|
||
|
||
#~ msgid ""
|
||
#~ "There is already a historical calibration result with the same name: %s. "
|
||
#~ "Only one of the results with the same name is saved. Are you sure you "
|
||
#~ "want to overrides the historical result?"
|
||
#~ msgstr ""
|
||
#~ "There is already a previous calibration result with the same name: %s. "
|
||
#~ "Only one of the results with the same name is saved. Are you sure you "
|
||
#~ "want to replace the previous result?"
|
||
|
||
#~ msgid ""
|
||
#~ "This action will break a cut correspondence.\n"
|
||
#~ "After that model consistency can't be guaranteed .\n"
|
||
#~ "\n"
|
||
#~ "To manipulate with solid parts or negative volumes you have to invalidate "
|
||
#~ "cut infornation first."
|
||
#~ msgstr ""
|
||
#~ "This action will break a cut correspondence.\n"
|
||
#~ "After that model consistency can't be guaranteed .\n"
|
||
#~ "\n"
|
||
#~ "To manipulate with solid parts or negative volumes you have to invalidate "
|
||
#~ "cut infornation first."
|
||
|
||
#~ msgid ""
|
||
#~ "This controls brim position including outer side of models, inner side of "
|
||
#~ "holes or both. Auto means both the brim position and brim width is "
|
||
#~ "analysed and calculated automatically"
|
||
#~ msgstr ""
|
||
#~ "This controls brim position including outer side of models, inner side of "
|
||
#~ "holes, or both. Auto means both the brim position and brim width are "
|
||
#~ "analyzed and calculated automatically."
|
||
|
||
#~ msgid ""
|
||
#~ "This object will be used to purge the nozzle after a filament change to "
|
||
#~ "save filament and decrease the print time. Colours of the objects will be "
|
||
#~ "mixed as a result"
|
||
#~ msgstr ""
|
||
#~ "This object will be used to purge the nozzle after a filament change to "
|
||
#~ "save filament and decrease the print time. Colors of the objects will be "
|
||
#~ "mixed as a result."
|
||
|
||
#~ msgid ""
|
||
#~ "This setting is only used for model size tunning with small value in some "
|
||
#~ "cases.\n"
|
||
#~ "For example, when model size has small error and hard to be assembled.\n"
|
||
#~ "For large size tuning, please use model scale function.\n"
|
||
#~ "\n"
|
||
#~ "The value will be reset to 0."
|
||
#~ msgstr ""
|
||
#~ "This setting is only used for tuning model size by small amounts.\n"
|
||
#~ "For example, when the model size has small errors or when tolerances are "
|
||
#~ "incorrect. For large adjustments, please use the model scale function.\n"
|
||
#~ "\n"
|
||
#~ "The value will be reset to 0."
|
||
|
||
#~ msgid ""
|
||
#~ "This setting specifies whether to add infill inside large hollows of tree "
|
||
#~ "support"
|
||
#~ msgstr ""
|
||
#~ "This setting specifies whether to add infill inside large hollows of tree "
|
||
#~ "support."
|
||
|
||
#~ msgid "This setting specify the count of walls around support"
|
||
#~ msgstr "This setting specify the count of walls around support"
|
||
|
||
#~ msgid "This setting specify the count of walls around tree support"
|
||
#~ msgstr "This setting specifies the wall count around tree support."
|
||
|
||
#~ msgid ""
|
||
#~ "This setting stands for how much volume of filament can be melted and "
|
||
#~ "extruded per second. Printing speed is limited by max volumetric speed, "
|
||
#~ "in case of too high and unreasonable speed setting. Zero means no limit"
|
||
#~ msgstr ""
|
||
#~ "Use this to set the maximum volume of filament that can be melted and "
|
||
#~ "extruded per second. Printing speed is limited by maximum volumetric "
|
||
#~ "speed if settings are unreasonably high. 0 means there is no limit."
|
||
|
||
#~ msgid ""
|
||
#~ "This slicer file version %s is newer than %s's version.\n"
|
||
#~ "\n"
|
||
#~ "Would you like to update your QIDI Studio software to enable all "
|
||
#~ "functionality in this slicer file?"
|
||
#~ msgstr ""
|
||
#~ "This slicer file version %s is newer than %s's version.\n"
|
||
#~ "\n"
|
||
#~ "Would you like to update your QIDI Studio software to enable all "
|
||
#~ "functionality in this slicer file?"
|
||
|
||
#~ msgid "This slicer file version %s is newer than %s's version:"
|
||
#~ msgstr "This slicer file version %s is newer than %s's version:"
|
||
|
||
#~ msgid "Timelapse Wipe Tower"
|
||
#~ msgstr "Timelapse Wipe Tower"
|
||
|
||
#~ msgid "Timelapse without toolhead"
|
||
#~ msgstr "Timelapse without toolhead"
|
||
|
||
#~ msgid ""
|
||
#~ "Too large elefant foot compensation is unreasonable.\n"
|
||
#~ "If really have serious elephant foot effect, please check other "
|
||
#~ "settings.\n"
|
||
#~ "For example, whether bed temperature is too high.\n"
|
||
#~ "\n"
|
||
#~ "The value will be reset to 0."
|
||
#~ msgstr ""
|
||
#~ "The elephant foot compensation value is too large.\n"
|
||
#~ "If there are significant elephant foot issues, please check other "
|
||
#~ "settings.\n"
|
||
#~ "The bed temperature may be too high, for example.\n"
|
||
#~ "\n"
|
||
#~ "The value will be reset to 0."
|
||
|
||
#~ msgid "Top Minimum Shell Thickness"
|
||
#~ msgstr "Top minimum shell thickness"
|
||
|
||
#~ msgid "Top Solid Layers"
|
||
#~ msgstr "Top solid layers"
|
||
|
||
#~ msgid "Total Time Estimation"
|
||
#~ msgstr "Total Time Estimation"
|
||
|
||
#~ msgid "Transfer"
|
||
#~ msgstr "Transfer"
|
||
|
||
#~ msgid "Transfer or discard changes"
|
||
#~ msgstr "Transfer or discard changes"
|
||
|
||
#~ msgid "Translation"
|
||
#~ msgstr "Translation"
|
||
|
||
#~ msgid "Tree support wall loops"
|
||
#~ msgstr "Tree support wall loops"
|
||
|
||
#~ msgid "Tree support with infill"
|
||
#~ msgstr "Tree support with infill"
|
||
|
||
#~ msgid "Unable to connect printer"
|
||
#~ msgstr "Unable to connect printer"
|
||
|
||
#~ msgid "Unable to create zip file"
|
||
#~ msgstr "Unable to create zip file"
|
||
|
||
#~ msgid ""
|
||
#~ "Unable to perform boolean operation on model meshes. Only positive parts "
|
||
#~ "will be exported."
|
||
#~ msgstr ""
|
||
#~ "Unable to perform boolean operation on model meshes. Only positive parts "
|
||
#~ "will be exported."
|
||
|
||
#~ msgid "Unconnected device"
|
||
#~ msgstr "Unconnected device"
|
||
|
||
#~ msgid "Unkown Error."
|
||
#~ msgstr "Unkown Error."
|
||
|
||
#~ msgid "Unload Filament"
|
||
#~ msgstr "Unload Filament"
|
||
|
||
#~ msgid "UpToDate"
|
||
#~ msgstr "UpToDate"
|
||
|
||
#~ msgid "Update the configs values of 3mf to latest."
|
||
#~ msgstr "Update the configs values of 3mf to latest."
|
||
|
||
#~ msgid "Upload Pictrues"
|
||
#~ msgstr "Upload Pictures"
|
||
|
||
#~ msgid ""
|
||
#~ "Upload task timed out. Please check the network problem and try again"
|
||
#~ msgstr "Upload task timed out. Please check the network and try again"
|
||
|
||
#~ msgid "Upper part"
|
||
#~ msgstr "Upper part"
|
||
|
||
#~ msgid ""
|
||
#~ "Use only one wall on flat top surface, to give more space to the top "
|
||
#~ "infill pattern"
|
||
#~ msgstr ""
|
||
#~ "Use only one wall on flat top surfaces, to give more space to the top "
|
||
#~ "infill pattern"
|
||
|
||
#~ msgid ""
|
||
#~ "Use only one wall on flat top surface, to give more space to the top "
|
||
#~ "infill pattern. Could be applyed on topmost surface or all top surface."
|
||
#~ msgstr ""
|
||
#~ "Use only one wall on flat top surface, to give more space to the top "
|
||
#~ "infill pattern. Could be applyed on topmost surface or all top surface."
|
||
|
||
#~ msgid "User authorization timeout"
|
||
#~ msgstr "User authorization timeout"
|
||
|
||
#~ msgid "User pause"
|
||
#~ msgstr "User pause"
|
||
|
||
#~ msgid "Vendor is not find, please reselect."
|
||
#~ msgstr "Vendor was not found; please reselect."
|
||
|
||
#~ msgid "Waiting"
|
||
#~ msgstr "Waiting"
|
||
|
||
#~ msgid ""
|
||
#~ "When recording timelapse without toolhead, it is recommended to add a "
|
||
#~ "\"Timelapse Wipe Tower\" \n"
|
||
#~ "by right-click the empty position of build plate and choose \"Add "
|
||
#~ "Primitive\"->\"Timelapse Wipe Tower\".\n"
|
||
#~ msgstr ""
|
||
#~ "When recording timelapse without toolhead, it is recommended to add a "
|
||
#~ "\"Timelapse Wipe Tower\" \n"
|
||
#~ "by right-click the empty position of build plate and choose \"Add "
|
||
#~ "Primitive\"->\"Timelapse Wipe Tower\".\n"
|
||
|
||
#~ msgid ""
|
||
#~ "When sparse infill density is low, the internal solid infill or internal "
|
||
#~ "bridge may have no archor at the end of line. This cause falling and bad "
|
||
#~ "quality when printing internal solid infill. When enable this feature, "
|
||
#~ "loop paths will be added to the sparse fill of the lower layers for "
|
||
#~ "specific thickness, so that better archor can be provided for internal "
|
||
#~ "bridge. 0 means disable this feature"
|
||
#~ msgstr ""
|
||
#~ "When sparse infill density is low, the internal solid infill or internal "
|
||
#~ "bridge may have no archor at the end of line. This cause falling and bad "
|
||
#~ "quality when printing internal solid infill. When enable this feature, "
|
||
#~ "loop paths will be added to the sparse fill of the lower layers for "
|
||
#~ "specific thickness, so that better archor can be provided for internal "
|
||
#~ "bridge. 0 means disable this feature"
|
||
|
||
#~ msgid ""
|
||
#~ "When the current material run out,the printer will continue to print in "
|
||
#~ "the following order."
|
||
#~ msgstr ""
|
||
#~ "When the current material runs out, the printer will continue to print in "
|
||
#~ "the following order."
|
||
|
||
#~ msgid ""
|
||
#~ "When using support material for the support interface, We recommend the "
|
||
#~ "following settings:\n"
|
||
#~ "0 top z distance, 0 interface spacing, concentric pattern."
|
||
#~ msgstr ""
|
||
#~ "When using support material for the support interface, We recommend the "
|
||
#~ "following settings:\n"
|
||
#~ "0 top z distance, 0 interface spacing, concentric pattern."
|
||
|
||
#~ msgid ""
|
||
#~ "When using support material for the support interface, We recommend the "
|
||
#~ "following settings:\n"
|
||
#~ "0 top z distance, 0 interface spacing, concentric pattern and disable "
|
||
#~ "independent support layer height"
|
||
#~ msgstr ""
|
||
#~ "When using support material for the support interface, We recommend the "
|
||
#~ "following settings:\n"
|
||
#~ "0 top z distance, 0 interface spacing, concentric pattern and disable "
|
||
#~ "independent support layer height"
|
||
|
||
#~ msgid ""
|
||
#~ "Whenever the retraction is done, the nozzle is lifted a little to create "
|
||
#~ "clearance between nozzle and the print. It prevents nozzle from hitting "
|
||
#~ "the print when travel move. Using spiral line to lift z can prevent "
|
||
#~ "stringing"
|
||
#~ msgstr ""
|
||
#~ "Whenever the retraction is done, the nozzle is lifted a little to create "
|
||
#~ "clearance between nozzle and the print. It prevents nozzle from hitting "
|
||
#~ "the print when travel move. Using spiral line to lift z can prevent "
|
||
#~ "stringing"
|
||
|
||
#~ msgid ""
|
||
#~ "Would you like to update your QIDI Studio software to enable all "
|
||
#~ "functionality in this slicer file?\n"
|
||
#~ msgstr ""
|
||
#~ "Would you like to update your QIDI Studio software to enable all "
|
||
#~ "functionality in this slicer file?\n"
|
||
|
||
#~ msgid "Wrong Access code"
|
||
#~ msgstr "Wrong Access code"
|
||
|
||
#~ msgid ""
|
||
#~ "X1 General Settings - Network Settings in the side bar of X1 main screen"
|
||
#~ msgstr ""
|
||
#~ "X1 General Settings - Network Settings in the side bar of the X1 main "
|
||
#~ "screen."
|
||
|
||
#~ msgid "XCam"
|
||
#~ msgstr "XCam"
|
||
|
||
#~ msgid "You'd better upgrade your software.\n"
|
||
#~ msgstr "You should update your software.\n"
|
||
|
||
#~ msgid ""
|
||
#~ "You are going to delete %u files from printer. Are you sure to continue?"
|
||
#~ msgstr ""
|
||
#~ "You are going to delete %u files from the printer. Are you sure you want "
|
||
#~ "to continue?"
|
||
|
||
#~ msgid ""
|
||
#~ "You can keep the modifield presets to the new project, discard or save "
|
||
#~ "changes as new presets."
|
||
#~ msgstr ""
|
||
#~ "You can keep the modifield presets to the new project, discard or save "
|
||
#~ "changes as new presets."
|
||
|
||
#~ msgid ""
|
||
#~ "You have changed some preset settings. \n"
|
||
#~ "Would you like to keep these changed settings (new value) after switching "
|
||
#~ "preset?"
|
||
#~ msgstr ""
|
||
#~ "You have changed some preset settings. \n"
|
||
#~ "Would you like to keep these changed settings (new value) after switching "
|
||
#~ "preset?"
|
||
|
||
#~ msgid ""
|
||
#~ "You have changed some preset settings. \n"
|
||
#~ "Would you like to keep these changed settings after switching preset?"
|
||
#~ msgstr ""
|
||
#~ "You have changed some preset settings. \n"
|
||
#~ "Would you like to keep these changed settings after switching presets?"
|
||
|
||
#~ msgid ""
|
||
#~ "You have changed some settings of preset \"%1%\". \n"
|
||
#~ "Would you like to keep these changed settings (new value) after switching "
|
||
#~ "preset?"
|
||
#~ msgstr ""
|
||
#~ "You have changed some settings of preset \"%1%\". \n"
|
||
#~ "Would you like to keep these changed settings (new value) after switching "
|
||
#~ "preset?"
|
||
|
||
#~ msgid ""
|
||
#~ "Your nozzle type in preset is not consistent with memorized nozzle.Did "
|
||
#~ "you change your nozzle lately ? "
|
||
#~ msgstr ""
|
||
#~ "Your nozzle type in preset is not consistent with memorized nozzle.Did "
|
||
#~ "you change your nozzle lately ? "
|
||
|
||
#~ msgid "Zig zag"
|
||
#~ msgstr "Zig zag"
|
||
|
||
#~ msgid "(Sort)"
|
||
#~ msgstr "(Sort)"
|
||
|
||
#~ msgid "\\u2103"
|
||
#~ msgstr "\\u2103"
|
||
|
||
#~ msgid " Object:"
|
||
#~ msgstr " Object:"
|
||
|
||
#~ msgid " \\u2103"
|
||
#~ msgstr "u2103"
|
||
|
||
#~ msgid ""
|
||
#~ " is too close to exclusion area, there may be collisions when printing.\n"
|
||
#~ msgstr ""
|
||
#~ " is too close to an exclusion area; there may be collisions when "
|
||
#~ "printing.\n"
|
||
|
||
#~ msgid ""
|
||
#~ " is too close to exclusion area, there will be collisions when printing.\n"
|
||
#~ msgstr ""
|
||
#~ " is too close to an exclusion area, there will be collisions when "
|
||
#~ "printing.\n"
|
||
|
||
#~ msgid " is too close to others, there may be collisions when printing."
|
||
#~ msgstr " is too close to others, there may be collisions when printing."
|
||
|
||
#~ msgid " is too close to others, there may be collisions when printing.\n"
|
||
#~ msgstr " is too close to others; there may be collisions when printing.\n"
|
||
|
||
#~ msgid " is too close to others, there will be collisions when printing.\n"
|
||
#~ msgstr " is too close to others, there will be collisions when printing.\n"
|
||
|
||
#~ msgid " plate %1%:"
|
||
#~ msgstr " plate %1%:"
|
||
|
||
#~ msgid " upload config prase failed\n"
|
||
#~ msgstr " upload config prase failed\n"
|
||
|
||
#~ msgid ""
|
||
#~ " will be closed before creating a new model. Do you want to continue?"
|
||
#~ msgstr ""
|
||
#~ " will be closed before creating a new model. Do you want to continue?"
|
||
|
||
#~ msgid "active"
|
||
#~ msgstr "active"
|
||
|
||
#~ msgid "default value"
|
||
#~ msgstr "default value"
|
||
|
||
#~ msgid "hybrid(auto)"
|
||
#~ msgstr "hybrid(auto)"
|
||
|
||
#~ msgid "infill/inner/outer"
|
||
#~ msgstr "infill/inner/outer"
|
||
|
||
#~ msgid "infill/outer/inner"
|
||
#~ msgstr "infill/outer/inner"
|
||
|
||
#~ msgid "inner-outer-inner/infill"
|
||
#~ msgstr "inner-outer-inner/infill"
|
||
|
||
#~ msgid "inner/outer/infill"
|
||
#~ msgstr "inner/outer/infill"
|
||
|
||
#~ msgid ""
|
||
#~ "load uptodate process/machine settings from the specified file when using "
|
||
#~ "uptodate"
|
||
#~ msgstr ""
|
||
#~ "load up-to-date process/machine settings from the specified file when "
|
||
#~ "using up-to-date"
|
||
|
||
#~ msgid "load uptodate process/machine settings when using uptodate"
|
||
#~ msgstr "load uptodate process/machine settings when using uptodate"
|
||
|
||
#~ msgid "max slicing time per plate in seconds."
|
||
#~ msgstr "max slicing time per plate in seconds"
|
||
|
||
#~ msgid "max triangle count per plate for slicing."
|
||
#~ msgstr "max triangle count per plate for slicing"
|
||
|
||
#~ msgid "mm/mm"
|
||
#~ msgstr "mm/mm"
|
||
|
||
#~ msgid "mm/s²"
|
||
#~ msgstr "mm/s²"
|
||
|
||
#~ msgid "mm\\u00B3"
|
||
#~ msgstr "mm\\u00B3"
|
||
|
||
#~ msgid "mm\\u00B3/s"
|
||
#~ msgstr "mm\\u00B3/s"
|
||
|
||
#~ msgid "mstpp"
|
||
#~ msgstr "mstpp"
|
||
|
||
#~ msgid "mtcpp"
|
||
#~ msgstr "mtcpp"
|
||
|
||
#~ msgid ""
|
||
#~ "non-mainifold edges be caused by cut tool, do you want to fix it now?"
|
||
#~ msgstr ""
|
||
#~ "non-manifold edges will be caused by the cut tool, do you want to fix it "
|
||
#~ "now?"
|
||
|
||
#~ msgid "normal"
|
||
#~ msgstr "normal"
|
||
|
||
#~ msgid ""
|
||
#~ "normal(auto) and tree(auto) is used to generate support automatically. If "
|
||
#~ "normal or tree is selected, only support enforcers are generated"
|
||
#~ msgstr ""
|
||
#~ "normal(auto), hybrid(auto) and tree(auto) are used to generate support "
|
||
#~ "automatically. If normal or tree is selected, only support enforcers are "
|
||
#~ "generated."
|
||
|
||
#~ msgid "open exhuast fan x seconds before printing completes"
|
||
#~ msgstr "Turn on exhaust fan x seconds before printing completes"
|
||
|
||
#~ msgid "outer/inner/infill"
|
||
#~ msgstr "outer/inner/infill"
|
||
|
||
#~ msgid "%1$d Object has custom supports."
|
||
#~ msgid_plural "%1$d Objects have custom supports."
|
||
#~ msgstr[0] "%1$d Object has custom supports."
|
||
#~ msgstr[1] "%1$d Objects have custom supports."
|
||
|
||
#~ msgid "Failed to repair folowing model object"
|
||
#~ msgid_plural "Failed to repair folowing model objects"
|
||
#~ msgstr[0] "Failed to repair the following model object"
|
||
#~ msgstr[1] "Failed to repair the following model objects"
|
||
|
||
#~ msgid "preparing, export 3mf failed!"
|
||
#~ msgstr "preparing, export 3mf failed!"
|
||
|
||
#~ msgid "the 3mf is not compatible, load geometry data only!"
|
||
#~ msgstr "The 3mf is not compatible, loading geometry data only!"
|
||
|
||
#~ msgid "tree"
|
||
#~ msgstr "tree"
|
||
|
||
#~ msgid ""
|
||
#~ "you can always update QIDI Studio at your convenience. The slicer file "
|
||
#~ "will now be loaded without full functionality."
|
||
#~ msgstr ""
|
||
#~ "You can always update QIDI Studio at your convenience. The slicer file "
|
||
#~ "will now be loaded without full functionality."
|
||
|
||
#~ msgid "°C"
|
||
#~ msgstr "°C"
|
||
|
||
#~ msgid "⌘+Any arrow"
|
||
#~ msgstr "⌘+Any arrow"
|
||
|
||
#~ msgid "⌘+Left mouse button"
|
||
#~ msgstr "⌘+Left mouse button"
|
||
|
||
#~ msgid "⌘+Shift+G"
|
||
#~ msgstr "⌘+Shift+G"
|
||
|
||
#~ msgid "⌥+Left mouse button"
|
||
#~ msgstr "⌥+Left mouse button"
|