{
	"type": "machine",
	"setting_id": "GM001",
	"name": "X-Plus 4 0.4 nozzle",
	"from": "system",
	"instantiation": "true",
	"inherits": "fdm_machine_x_common",
	"printer_model": "X-Plus 4",
	"gcode_flavor": "klipper",
	"default_print_profile": "0.20mm Standard @XPlus4",
	"printer_settings_id": "Qidi",
	"bed_exclude_area": ["0x305", "0x302", "35x302", "35x305", "305x305", "305x305", "305x305", "305x20", "293x20", "293x0", "305x0", "305x20", "305x305"],
	"change_filament_gcode": "G1 E{retraction_distances_when_cut[previous_extruder]} F[old_filament_e_feedrate]",
	"default_filament_profile": ["QIDI PLA Rapido @Qidi X-Plus 4 0.4 nozzle"],
	"deretraction_speed": ["0"],
	"extruder_clearance_height_to_lid": "135",
    "extruder_clearance_height_to_rod": "32",
    "extruder_clearance_max_radius": "72",
	"layer_change_gcode": "{if timelapse_type == 1} ; timelapse with wipe tower\nG92 E0\nG1 E-[retraction_length] F1800\nG2 Z{layer_z + 0.4} I0.86 J0.86 P1 F20000 ; spiral lift a little\nG1 X95 Y304 F20000\nG92 E0\nM400\nTIMELAPSE_TAKE_FRAME\nG1 Y324 F200\nG1 X65 F200\nG1 Y290 F2000\n{elsif timelapse_type == 0} ; timelapse without wipe tower\nTIMELAPSE_TAKE_FRAME\n{endif}\nG92 E0\nSET_PRINT_STATS_INFO CURRENT_LAYER={layer_num + 1}",
	"machine_pause_gcode": "M0",
	"max_layer_height": ["0.28"],
	"min_layer_height": ["0.08"],
	"nozzle_diameter": ["0.4"],
	"printable_area": ["0x0","305x0","305x305","0x305"],
	"printable_height": "280",
	"retract_length_toolchange": ["2"],
	"retract_lift_below":["279"],
	"retraction_length": ["0.8"],
	"retraction_minimum_travel": ["1"],
	"enable_long_retraction_when_cut": "2"
}