{
	"type": "machine",
	"setting_id": "GM001",
	"name": "Q1 Pro 0.4 nozzle",
	"from": "system",
	"instantiation": "true",
	"inherits": "fdm_q_common",
	"printer_model": "Q1 Pro",
	"gcode_flavor": "klipper",
	"default_print_profile": "0.20mm Standard @Q1 Pro",
	"printer_settings_id": "Qidi",
    "bed_exclude_area": ["25x245","25x240","115x240","115x245","25x245","25x245","25x245","25x245","208x245","208x240","245x240","245x245"],
	"change_filament_gcode": "G1 E{retraction_distances_when_cut[previous_extruder]} F[old_filament_e_feedrate]",
	"default_filament_profile": ["QIDI PLA Rapido"],
	"deretraction_speed": ["0"],
	"extruder_clearance_height_to_lid": "120",
    "extruder_clearance_height_to_rod": "40",
    "extruder_clearance_max_radius": "70",
	"machine_end_gcode": "M141 S0\nM104 S0\nM140 S0\nG1 E-3 F1800\nG0 Z{max_layer_z + 3} F600\nG0 X0 Y0 F12000\n{if max_layer_z < max_print_height / 2}G1 Z{max_print_height / 2 + 10} F600{else}G1 Z{min(max_print_height, max_layer_z + 3)}{endif}",
	"machine_pause_gcode": "M0",
    "machine_start_gcode": "PRINT_START BED=[bed_temperature_initial_layer_single] HOTEND=[nozzle_temperature_initial_layer] CHAMBER=[chamber_temperatures]\nM83\nM140 S[bed_temperature_initial_layer_single]\nM104 S[nozzle_temperature_initial_layer]\nM141 S[chamber_temperatures]\nG4 P3000\nG0 X{max((min(print_bed_max[0], first_layer_print_min[0] + 80) - 85),0)} Y{max((min(print_bed_max[1], first_layer_print_min[1] + 80) - 85),0)} Z5 F6000\nG0 Z[initial_layer_print_height] F600\nG1 E3 F1800\nG1 X{(min(print_bed_max[0], first_layer_print_min[0] + 80))} E{85 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 Y{max((min(print_bed_max[1], first_layer_print_min[1] + 80) - 85),0) + 2} E{2 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 X{max((min(print_bed_max[0], first_layer_print_min[0] + 80) - 85),0)} E{85 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 Y{max((min(print_bed_max[1]-5, first_layer_print_min[1] + 80) - 85),0) + 85} E{83 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 X{max((min(print_bed_max[0], first_layer_print_min[0] + 80) - 85),0) + 2} E{2 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 Y{max((min(print_bed_max[1], first_layer_print_min[1] + 80) - 85),0) + 3} E{82 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 X{max((min(print_bed_max[0], first_layer_print_min[0] + 80) - 85),0) + 3} Z0\nG1 X{max((min(print_bed_max[0], first_layer_print_min[0] + 80) - 85),0) + 6}\nG1 Z1 F600",
	"max_layer_height": ["0.28"],
	"min_layer_height": ["0.08"],
	"nozzle_diameter": ["0.4"],
	"printable_area": ["0x0","245x0","245x245","0x245"],
	"printable_height": "240",
	"retract_before_wipe": ["0%"],
	"retract_length_toolchange": ["2"],
	"retract_lift_below":["239"],
	"retraction_length": ["0.8"],
	"retraction_minimum_travel": ["1"],
    "thumbnail_size": ["160x160/PNG","112x112/PNG"],
	"layer_change_gcode": "{if timelapse_type == 1} ; timelapse with wipe tower\nG92 E0\nG1 E-[retraction_length] F1800\nG2 Z{layer_z + 0.4} I0.86 J0.86 P1 F20000 ; spiral lift a little\nG1 X97 Y235 F20000\nG1 Y254 F2000\nG92 E0\nM400\nTIMELAPSE_TAKE_FRAME\nG1 E[retraction_length] F300\nG1 X85 F2000\nG1 X97 F2000\nG1 Y220 F2000\n{elsif timelapse_type == 0} ; timelapse without wipe tower\nTIMELAPSE_TAKE_FRAME\n{endif}\nG92 E0",
    "wipe_distance": ["2"]
}