# SOME DESCRIPTIVE TITLE. # Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER # This file is distributed under the same license as the PACKAGE package. # FIRST AUTHOR , YEAR. # #, fuzzy msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2024-05-31 17:44+0800\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" "Language: \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=INTEGER; plural=EXPRESSION;\n" msgid "The filament may not be compatible with the current machine settings. Generic filament presets will be used." msgstr "" msgid "The filament model is unknown. Still using the previous filament preset." msgstr "" msgid "The filament model is unknown. Generic filament presets will be used." msgstr "" msgid "The filament may not be compatible with the current machine settings. A random filament preset will be used." msgstr "" msgid "The filament model is unknown. A random filament preset will be used." msgstr "" msgid "right" msgstr "" msgid "left" msgstr "" msgid "right extruder" msgstr "" msgid "left extruder" msgstr "" msgid "extruder" msgstr "" msgid "TPU is not supported by AMS." msgstr "" msgid "Box does not support 'QIDI PET-CF'." msgstr "" msgid "The current filament doesn't support the E3D high-flow nozzle and can't be used." msgstr "" msgid "Please cold pull before printing TPU to avoid clogging. You may use cold pull maintenance on the printer." msgstr "" msgid "Damp PVA will become flexible and get stuck inside AMS,please take care to dry it before use." msgstr "" msgid "Damp PVA is flexible and may get stuck in extruder. Dry it before use." msgstr "" msgid "The rough surface of PLA Glow can accelerate wear on the AMS system, particularly on the internal components of the AMS Lite." msgstr "" msgid "CF/GF filaments are hard and brittle, It's easy to break or get stuck in AMS, please use with caution." msgstr "" msgid "PPS-CF is brittle and could break in bended PTFE tube above Toolhead." msgstr "" msgid "PPA-CF is brittle and could break in bended PTFE tube above Toolhead." msgstr "" msgid "Default settings may affect print quality. Adjust as needed for best results." msgstr "" #, possible-c-format, possible-boost-format msgid "%s is not supported by %s extruder." msgstr "" msgid "The toolhead and hotend rack may move. Please keep your hands away from the chamber." msgstr "" msgid "Warning" msgstr "" msgid "Hotend information may be inaccurate. Would you like to re-read the hotend? (Hotend information may change during power-off)." msgstr "" msgid "I confirm all" msgstr "" msgid "Re-read all" msgstr "" msgid "Reading the hotends, please wait." msgstr "" msgid "During the hotend upgrade, the toolhead will move. Don't reach into the chamber." msgstr "" msgid "Update" msgstr "" msgid "High Flow" msgstr "" msgid "Standard" msgstr "" msgid "Unknown" msgstr "" msgid "Hardened Steel" msgstr "" msgid "Stainless Steel" msgstr "" msgid "Tungsten Carbide" msgstr "" msgid "Update successful." msgstr "" msgid "Downloading failed." msgstr "" msgid "Verification failed." msgstr "" msgid "Update failed." msgstr "" msgid "Current AMS humidity" msgstr "" msgid "Humidity" msgstr "" msgid "Temperature" msgstr "" msgid "Left Time" msgstr "" msgid "Drying" msgstr "" msgid "Idle" msgstr "" #, possible-c-format, possible-boost-format msgid "%d ℃" msgstr "" msgid "Model:" msgstr "" msgid "Serial:" msgstr "" msgid "Version:" msgstr "" msgid "Latest version" msgstr "" msgid "Row A" msgstr "" msgid "Row B" msgstr "" msgid "Toolhead" msgstr "" msgid "Empty" msgstr "" msgid "Error" msgstr "" msgid "Induction Hotend Rack" msgstr "" msgid "Hotends Info" msgstr "" msgid "Read All" msgstr "" msgid "Reading " msgstr "" msgid "Please wait" msgstr "" msgid "Reading" msgstr "" msgid "Running..." msgstr "" msgid "Raised" msgstr "" msgid "The hotend is in an abnormal state and currently unavailable. Please go to 'Device -> Upgrade' to upgrade firmware." msgstr "" msgid "Abnormal Hotend" msgstr "" msgid "Cancel" msgstr "" msgid "Jump to the upgrade page" msgstr "" msgid "SN" msgstr "" msgid "Version" msgstr "" msgid "Hotend Rack" msgstr "" msgid "ToolHead" msgstr "" msgid "Nozzle information needs to be read" msgstr "" msgid "Supports Painting" msgstr "" msgid "Please select single object." msgstr "" msgid "Mouse wheel" msgstr "" msgid "Section view" msgstr "" msgid "Reset direction" msgstr "" msgid "Ctrl + Mouse wheel" msgstr "" msgid "Pen size" msgstr "" msgid "Left mouse button" msgstr "" msgid "Enforce supports" msgstr "" msgid "Right mouse button" msgstr "" msgid "Block supports" msgstr "" msgid "Shift + Left mouse button" msgstr "" msgid "Erase" msgstr "" msgid "Erase all painting" msgstr "" msgid "Highlight overhang areas" msgstr "" msgid "Gap fill" msgstr "" msgid "Perform" msgstr "" msgid "Gap area" msgstr "" msgid "Tool type" msgstr "" msgid "Smart fill angle" msgstr "" msgid "On overhangs only" msgstr "" msgid "Auto support threshold angle: " msgstr "" msgid "Circle" msgstr "" msgid "Sphere" msgstr "" msgid "Fill" msgstr "" msgid "Gap Fill" msgstr "" #, possible-boost-format msgid "Allows painting only on facets selected by: \"%1%\"" msgstr "" msgid "Highlight faces according to overhang angle." msgstr "" msgid "No auto support" msgstr "" msgid "Painting below the build plate is not allowed." msgstr "" msgid "The white outline indicates the position of the build plate at Z = 0." msgstr "" msgid "Support Generated" msgstr "" msgid "Mode" msgstr "" msgid "Convex hull" msgstr "" msgid "Triangular facet" msgstr "" msgid "Warning: All triangle areas are too small,The current function is not working." msgstr "" msgid "Lay on face" msgstr "" #, possible-boost-format msgid "Filament count exceeds the maximum number that painting tool supports. only the first %1% filaments will be available in painting tool." msgstr "" msgid "Color Painting" msgstr "" msgid "Pen shape" msgstr "" msgid "Paint" msgstr "" msgid "Key 1~9" msgstr "" msgid "Choose filament" msgstr "" msgid "Connected same color" msgstr "" msgid "Edge detection" msgstr "" msgid "Triangles" msgstr "" msgid "Filaments" msgstr "" msgid "Brush" msgstr "" msgid "Smart fill" msgstr "" msgid "Bucket fill" msgstr "" msgid "Height range" msgstr "" msgid "Shift + Enter" msgstr "" msgid "Toggle Wireframe" msgstr "" msgid "Shift + L" msgstr "" msgid "Toggle non-manifold edges" msgstr "" msgid "Rotate horizontally" msgstr "" msgid "hit face" msgstr "" msgid "Shortcut Key " msgstr "" msgid "Triangle" msgstr "" msgid "Height Range" msgstr "" msgid "Place input box of bottom near mouse" msgstr "" msgid "Vertical" msgstr "" msgid "Horizontal" msgstr "" msgid "View: keep horizontal" msgstr "" msgid "Remove painted color" msgstr "" #, possible-boost-format msgid "Painted using: Filament %1%" msgstr "" msgid "Fuzzy skin Painting" msgstr "" msgid "Add fuzzy skin" msgstr "" msgid "Remove fuzzy skin" msgstr "" msgid "Move" msgstr "" msgid "Please select at least one object." msgstr "" msgid "Rotate" msgstr "" msgid "Optimize orientation" msgstr "" msgid "Apply" msgstr "" msgid "Scale" msgstr "" msgid "Error: Please close all toolbar menus first" msgstr "" msgid "Tool-Move" msgstr "" msgid "Tool-Scale" msgstr "" msgid "Tool-Rotate" msgstr "" msgid "Tool-Lay on Face" msgstr "" msgid "Bottom:" msgstr "" msgid "in" msgstr "" msgid "mm" msgstr "" msgid "Part selection" msgstr "" msgid "Fixed step drag" msgstr "" msgid "Keep holding down Ctrl" msgstr "" msgid "Select multiple objects" msgstr "" msgid "Keep holding down Alt" msgstr "" msgid "Select multiple parts" msgstr "" msgid "Single sided scaling" msgstr "" msgid "Position" msgstr "" msgid "Rotate (relative)" msgstr "" msgid "Scale ratios" msgstr "" msgid "Object Operations" msgstr "" msgid "Volume Operations" msgstr "" msgid "Translate" msgstr "" msgid "Group Operations" msgstr "" msgid "Set Orientation" msgstr "" msgid "Set Scale" msgstr "" msgid "Reset Position" msgstr "" msgid "Reset Rotation" msgstr "" msgid "Object coordinates" msgstr "" msgid "World coordinates" msgstr "" msgid "Translate(Relative)" msgstr "" msgid "Align top-bottom center" msgstr "" msgid "Align" msgstr "" msgid "Distribute" msgstr "" msgid "Holded down Ctrl key continuously and click by left mouse button can select multiple objects, or holded down Alt key continuously and click by left mouse button can select multiple parts" msgstr "" msgid "Align left" msgstr "" msgid "Align left-right center" msgstr "" msgid "Align right" msgstr "" msgid "Distribute left-right" msgstr "" msgid "Please select at least 3 parts or objects" msgstr "" msgid "Align front" msgstr "" msgid "Align front-back center" msgstr "" msgid "Align back" msgstr "" msgid "Distribute front-back" msgstr "" msgid "Align bottom" msgstr "" msgid "Align top" msgstr "" msgid "Distribute top-bottom" msgstr "" msgid "°" msgstr "" msgid "Reset current rotation to the value when open the rotation tool." msgstr "" msgid "Rotate (absolute)" msgstr "" msgid "Reset current rotation to real zeros." msgstr "" msgid "Part coordinates" msgstr "" msgid "%" msgstr "" #. TRN - Input label. Be short as possible #. Height of one text line - Font Ascent #. TRN - Input label. Be short as possible msgid "Size" msgstr "" msgid "uniform scale" msgstr "" msgid "Part" msgstr "" msgid "Object" msgstr "" msgid "Drag to move the cut plane" msgstr "" msgid "" "Drag to move the cut plane\n" "Right-click a part to assign it to the other side" msgstr "" msgid "Left click" msgstr "" msgid "Add connector" msgstr "" msgid "Right click" msgstr "" msgid "Remove connector" msgstr "" msgid "Drag" msgstr "" msgid "Move connector" msgstr "" msgid "Add connector to selection" msgstr "" msgid "Remove connector from selection" msgstr "" msgid "Select all connectors" msgstr "" msgid "Left drag" msgstr "" msgid "Plot cut plane" msgstr "" msgid "right click" msgstr "" msgid "Assign the part to the other side" msgstr "" msgid "Cut" msgstr "" msgid "non-manifold edges be caused by cut tool, do you want to fix it now?" msgstr "" msgid "Repairing model object" msgstr "" msgid "Connector" msgstr "" msgid "Flip cut plane" msgstr "" msgid "Planar" msgstr "" msgid "Dovetail" msgstr "" msgid "Movement:" msgstr "" msgid "Groove Angle" msgstr "" #. TRN - Input label. Be short as possible #. Angle between Y axis and text line direction. #. TRN - Input label. Be short as possible msgid "Rotation" msgstr "" msgid "Movement" msgstr "" msgid "Height" msgstr "" msgid "Edit connectors" msgstr "" msgid "Add connectors" msgstr "" msgid "Groove" msgstr "" #. TRN - Input label. Be short as possible #. Size in emboss direction #. TRN - Input label. Be short as possible msgid "Depth" msgstr "" msgid "Width" msgstr "" msgid "Flap Angle" msgstr "" msgid "Keep orientation" msgstr "" msgid "Place on cut" msgstr "" msgid "Flip" msgstr "" msgid "After cut" msgstr "" msgid "Cut to parts" msgstr "" msgid "Auto Segment" msgstr "" msgid "Perform cut" msgstr "" msgid "Reset" msgstr "" msgid "Connectors" msgstr "" msgid "Type" msgstr "" msgid "Style" msgstr "" msgid "Shape" msgstr "" msgid "Depth ratio" msgstr "" msgid "Remove connectors" msgstr "" msgid "Prizm" msgstr "" msgid "Frustum" msgstr "" msgid "Square" msgstr "" msgid "Hexagon" msgstr "" msgid "Snap global parameters" msgstr "" msgid "Bulge" msgstr "" msgid "Gap" msgstr "" msgid "Confirm connectors" msgstr "" msgid "Invalid connectors detected" msgstr "" msgid "connector is out of cut contour" msgstr "" msgid "connectors are out of cut contour" msgstr "" msgid "connector is out of object" msgstr "" msgid "connectors is out of object" msgstr "" msgid "Some connectors are overlapped" msgstr "" msgid "" "Invalid state. \n" "No one part is selected to keep after cut" msgstr "" msgid "Plug" msgstr "" msgid "Dowel" msgstr "" msgid "Snap" msgstr "" msgid "Tolerance" msgstr "" msgid "Mesh name" msgstr "" msgid "Detail level" msgstr "" msgid "Decimate ratio" msgstr "" #, possible-boost-format msgid "Processing model '%1%' with more than 1M triangles could be slow. It is highly recommended to simplify the model." msgstr "" msgid "Simplify model" msgstr "" msgid "Simplify" msgstr "" msgid "Simplification is currently only allowed when a single part is selected" msgstr "" msgid "Extra high" msgstr "" msgid "High" msgstr "" msgid "Medium" msgstr "" msgid "Low" msgstr "" msgid "Extra low" msgstr "" #, possible-c-format, possible-boost-format msgid "%d triangles" msgstr "" msgid "Show wireframe" msgstr "" #, possible-boost-format msgid "%1%" msgstr "" msgid "Can't apply when process preview." msgstr "" msgid "Operation already cancelling. Please wait few seconds." msgstr "" msgid "Face recognition" msgstr "" msgid "Perform Recognition" msgstr "" msgid "Vertex" msgstr "" msgid "Edge" msgstr "" msgid "Plane" msgstr "" msgid "Point on edge" msgstr "" msgid "Point on circle" msgstr "" msgid "Point on plane" msgstr "" msgid "Center of edge" msgstr "" msgid "Center of circle" msgstr "" msgid "Select feature" msgstr "" msgid "Select point" msgstr "" msgid "Delete" msgstr "" msgid "Restart selection" msgstr "" msgid "Esc" msgstr "" msgid "Cancel a feature until exit" msgstr "" msgid "Measure" msgstr "" msgid "Please confirm explosion ratio = 1,and please select at least one object" msgstr "" msgid "Edit to scale" msgstr "" msgctxt "Verb" msgid "Scale all" msgstr "" msgid "None" msgstr "" msgid "Diameter" msgstr "" msgid "Length" msgstr "" msgid "Selection" msgstr "" msgid " (Moving)" msgstr "" msgid "" "Select 2 faces on objects and \n" " make objects assemble together." msgstr "" msgid "" "Select 2 points or circles on objects and \n" " specify distance between them." msgstr "" msgid "Face" msgstr "" msgid " (Fixed)" msgstr "" msgid "Point" msgstr "" msgid "" "Feature 1 has been reset, \n" "feature 2 has been feature 1" msgstr "" msgid "Warning:please select Plane's feature." msgstr "" msgid "Warning:please select Point's or Circle's feature." msgstr "" msgid "Warning:please select two different mesh." msgstr "" msgid "Copy to clipboard" msgstr "" msgid "Angle" msgstr "" msgid "Perpendicular distance" msgstr "" msgid "Distance" msgstr "" msgid "Direct distance" msgstr "" msgid "Distance XYZ" msgstr "" msgid "Parallel" msgstr "" msgid "Center coincidence" msgstr "" msgid "Featue 1" msgstr "" msgid "Reverse rotation" msgstr "" msgid "Rotate around center:" msgstr "" msgid "Parallel_distance:" msgstr "" msgid "Flip by Face 2" msgstr "" msgid "Assemble" msgstr "" msgid "Please confirm explosion ratio = 1 and select at least two volumes." msgstr "" msgid "Please select at least two volumes." msgstr "" msgid "(Moving)" msgstr "" msgid "Point and point assembly" msgstr "" msgid "" "It is recommended to assemble the objects first,\n" "because the objects is restriced to bed \n" "and only parts can be lifted." msgstr "" msgid "Face and face assembly" msgstr "" msgid "Brush size" msgstr "" msgid "Brush shape" msgstr "" msgid "Enforce seam" msgstr "" msgid "Block seam" msgstr "" msgid "Seam painting" msgstr "" msgid "Remove selection" msgstr "" msgid "Recommend" msgstr "" msgid "Old version" msgstr "" msgid "First font" msgstr "" msgid "Default font" msgstr "" msgid "Save the parameters of the current text tool as a style for easy subsequent use." msgstr "" #, possible-boost-format msgid "Modified style \"%1%\"" msgstr "" #, possible-boost-format msgid "Current style is \"%1%\"" msgstr "" #, possible-boost-format msgid "" "Changing style to \"%1%\" will discard current style modification.\n" "\n" "Would you like to continue anyway?" msgstr "" msgid "Not valid style." msgstr "" #, possible-boost-format msgid "Style \"%1%\" can't be used and will be removed from a list." msgstr "" msgid "First Add style to list." msgstr "" #, possible-boost-format msgid "Save %1% style" msgstr "" msgid "New name of style" msgstr "" msgid "Name can't be empty." msgstr "" msgid "Name has to be unique." msgstr "" msgid "OK" msgstr "" msgid "Save as new style" msgstr "" msgid "The current style has been modified but not saved. Do you want to save it?" msgstr "" msgid "Save current style" msgstr "" msgid "Add new style" msgstr "" msgid "Only valid font can be added to style" msgstr "" msgid "Add style to my list" msgstr "" msgid "Remove style" msgstr "" msgid "Can't remove the last existing style." msgstr "" #, possible-boost-format msgid "Are you sure you want to permanently remove the \"%1%\" style?" msgstr "" #, possible-boost-format msgid "Delete \"%1%\" style." msgstr "" #, possible-boost-format msgid "Can't delete \"%1%\". It is last style." msgstr "" #, possible-boost-format msgid "Can't delete temporary style \"%1%\"." msgstr "" msgid "Operation" msgstr "" msgid "Click to change text into object part." msgstr "" msgid "You can't change a type of the last solid part of the object." msgstr "" msgctxt "EmbossOperation" msgid "Cut" msgstr "" msgid "Click to change part type into negative volume." msgstr "" msgid "Modifier" msgstr "" msgid "Click to change part type into modifier." msgstr "" msgid "Surround projection by char" msgstr "" msgid "Not surround" msgstr "" msgid "Surround surface" msgstr "" msgid "Surround" msgstr "" msgid "Horizonal" msgstr "" msgid "Reset rotation" msgstr "" msgid "Rotate the text counterclockwise." msgstr "" msgid "Text shape" msgstr "" #. TRN - Input label. Be short as possible #. Select look of letter shape msgid "Font" msgstr "" msgid "Thickness" msgstr "" msgid "Input text" msgstr "" msgid "Advanced" msgstr "" msgid "Embeded depth" msgstr "" msgid "Text Gap" msgstr "" msgid "Warning:There is a mirror in the text matrix, and dragging it will completely regenerate it." msgstr "" msgid "Warning:Due to font upgrades,previous font may not necessarily be replaced successfully, and recommend you to modify the font." msgstr "" msgid "Warning:create text fail." msgstr "" msgid "Warning:text normal is error." msgstr "" msgid "Warning:text normal has been reset." msgstr "" msgid "Warning:current text spacing is not very reasonable. If you continue editing, a more reasonable text spacing will be generated." msgstr "" msgid "Warning:old matrix has at least two parameters: mirroring, scaling, and rotation. If you continue editing, it may not be correct. Please dragging text or cancel using current pose, save and reedit again." msgstr "" msgid "Error:Detecting an incorrect mesh id or an unknown error, regenerating text may result in incorrect outcomes.Please drag text,save it then reedit it again." msgstr "" msgid "Warning:Due to functional upgrade, rotation information cannot be restored. Please drag or modify text,save it and reedit it will ok." msgstr "" msgid "Detected that text did not adhere to mesh surface. Please manually drag yellow square to mesh surface that needs to be adhered." msgstr "" msgid "The text cannot be written using the selected font. Please try choosing a different font." msgstr "" msgid "Embossed text cannot contain only white spaces." msgstr "" msgid "Unsupported characters automatically switched to fallback font." msgstr "" msgid "Text doesn't show current horizontal alignment." msgstr "" #, possible-boost-format msgid "Font \"%1%\" can't be selected." msgstr "" msgid "Revert text size." msgstr "" msgid "" "Advanced options cannot be changed for the selected font.\n" "Select another font." msgstr "" #. TRN - Input label. Be short as possible msgid "Boldness" msgstr "" msgid "Skew" msgstr "" msgid "No symbol" msgstr "" msgid "Loading" msgstr "" msgid "In queue" msgstr "" #. TRN - Input label. Be short as possible #. Copy surface of model on surface of the embossed text #. TRN - Input label. Be short as possible msgid "Use surface" msgstr "" #. TRN - Input label. Be short as possible #. Option to change projection on curved surface #. for each character(glyph) in text separately msgid "Per glyph" msgstr "" #. TRN - Input label. Be short as possible #. Align Top|Middle|Bottom and Left|Center|Right msgid "Alignment" msgstr "" #. TRN - Input label. Be short as possible msgid "Text gap" msgstr "" #. TRN - Input label. Be short as possible msgid "Line gap" msgstr "" #. TRN - Input label. Be short as possible #. Like Font italic msgid "Skew ratio" msgstr "" #. TRN - Input label. Be short as possible #. Distance from model surface to be able #. move text as part fully into not flat surface #. move text as modifier fully out of not flat surface #. TRN - Input label. Be short as possible msgid "From surface" msgstr "" msgid "Style name" msgstr "" msgid "There is already a text style with the same name." msgstr "" msgid "There are spaces or illegal characters present." msgstr "" msgid "Head diameter" msgstr "" msgid "Max angle" msgstr "" msgid "Detection radius" msgstr "" msgid "Remove selected points" msgstr "" msgid "Remove all" msgstr "" msgid "Auto-generate points" msgstr "" msgid "Add a brim ear" msgstr "" msgid "Delete a brim ear" msgstr "" msgid "Ctrl+Mouse wheel" msgstr "" msgid "Adjust section view" msgstr "" msgid "Warning: The brim type is not set to \"painted\",the brim ears will not take effect !" msgstr "" msgid "Set the brim type of this object to \"painted\"" msgstr "" msgid " invalid brim ears" msgstr "" msgid "Brim Ears" msgstr "" msgid "Choose SVG file for emboss:" msgstr "" #, possible-boost-format msgid "File does NOT exist (%1%)." msgstr "" #, possible-boost-format msgid "Filename has to end with \".svg\" but you selected %1%" msgstr "" #, possible-boost-format msgid "Nano SVG parser can't load from file (%1%)." msgstr "" #, possible-boost-format msgid "%1% contains some unsupported data. Please use third-party software to convert the SVG to path data before reimporting." msgstr "" #. TRN - Input label. Be short as possible msgid "Mirror" msgstr "" #, possible-boost-format msgid "Opacity (%1%)" msgstr "" #, possible-boost-format msgid "Color gradient (%1%)" msgstr "" msgid "Undefined fill type" msgstr "" msgid "Linear gradient" msgstr "" msgid "Radial gradient" msgstr "" msgid "Open filled path" msgstr "" msgid "Undefined stroke type" msgstr "" msgid "Path can't be healed from selfintersection and multiple points." msgstr "" msgid "Final shape constains selfintersection or multiple points with same coordinate." msgstr "" #, possible-boost-format msgid "Shape is marked as invisible (%1%)." msgstr "" #. TRN: The first placeholder is shape identifier, the second one is text describing the problem. #, possible-boost-format msgid "Fill of shape (%1%) contains unsupported: %2%." msgstr "" #, possible-boost-format msgid "Stroke of shape (%1%) is too thin (minimal width is %2% mm)." msgstr "" #, possible-boost-format msgid "Stroke of shape (%1%) contains unsupported: %2%." msgstr "" msgid "Not valid state please report reproduction steps on github" msgstr "" msgid "No embossed file" msgstr "" msgid "Missing svg file in embossed shape" msgstr "" msgid "Missing data of svg file" msgstr "" msgid "Tip:If you want to place svg file on another part surface,you should select part first, and then drag svg file to the part surface." msgstr "" #. TRN - Preview of filename after clear local filepath. msgid "Unknown filename" msgstr "" #, possible-boost-format msgid "SVG file path is \"%1%\"" msgstr "" msgid "Reload SVG file from disk." msgstr "" msgid "Change file" msgstr "" msgid "Change to another .svg file" msgstr "" #. TRN: An menu option to convert the SVG into an unmodifiable model part. msgid "Bake to model" msgstr "" #. TRN: Tooltip for the menu item. msgid "Bake into model as uneditable part" msgstr "" msgid "Save as" msgstr "" msgid "Save SVG file" msgstr "" msgid "Save as '.svg' file" msgstr "" msgid "Size in emboss direction." msgstr "" #. TRN: The placeholder contains a number. #, possible-boost-format msgid "Scale also changes amount of curve samples (%1%)" msgstr "" msgid "set width and height keep ratio with width" msgstr "" msgid "Width of SVG." msgstr "" msgid "Height of SVG." msgstr "" msgid "Lock/unlock the aspect ratio of the SVG." msgstr "" msgid "Reset scale" msgstr "" msgid "Distance of the center of the SVG to the model surface." msgstr "" msgid "Reset distance" msgstr "" msgid "Rotate text Clock-wise." msgstr "" msgid "Lock/unlock rotation angle when dragging above the surface." msgstr "" msgid "Mirror vertically" msgstr "" msgid "Mirror horizontally" msgstr "" msgid "Set Mirror" msgstr "" msgid "Face the camera" msgstr "" msgid "Join" msgstr "" #. TRN: This is the name of the action that shows in undo/redo stack (changing part type from SVG to something else). msgid "Change SVG Type" msgstr "" msgid "Ctrl+" msgstr "" msgid "Notice" msgstr "" msgid "Undefined" msgstr "" #, possible-boost-format msgid "%1% was replaced with %2%" msgstr "" msgid "The configuration may be generated by a newer version of QIDIStudio." msgstr "" msgid "Some values have been replaced. Please check them:" msgstr "" msgid "Process" msgstr "" msgid "Filament" msgstr "" msgid "Machine" msgstr "" msgid "Configuration package was loaded, but some values were not recognized." msgstr "" #, possible-boost-format msgid "Configuration file \"%1%\" was loaded, but some values were not recognized." msgstr "" msgid "Internal Version" msgstr "" msgid "Beta Version" msgstr "" msgid "V" msgstr "" msgid "Version" msgstr "" msgid "QIDIStudio will terminate because of running out of memory.It may be a bug. It will be appreciated if you report the issue to our team." msgstr "" msgid "Fatal error" msgstr "" msgid "QIDIStudio will terminate because of a localization error. It will be appreciated if you report the specific scenario this issue happened." msgstr "" msgid "Critical error" msgstr "" #, possible-boost-format msgid "QIDIStudio got an unhandled exception: %1%" msgstr "" msgid "This file is not from a trusted site, do you want to open it anyway?" msgstr "" msgid "Untitled" msgstr "" msgid "Downloading QIDI Network Plug-in" msgstr "" msgid "Login information expired. Please login again." msgstr "" msgid "Failed to connect to the cloud device server. Please check your network and firewall." msgstr "" msgid "Incorrect password" msgstr "" #, possible-c-format, possible-boost-format msgid "Connect %s failed! [SN:%s, code=%s]" msgstr "" msgid "QIDIStudio configuration file read failed. Please manually backup and delete it, and then restart QIDIStudio software." msgstr "" #, possible-c-format, possible-boost-format msgid "" "Failed to install preset files to %s.\n" "Please make sure QIDI Studio has permission to delete and write in this directory,\n" "and it is not being occupied by the system or other applications." msgstr "" #, possible-c-format, possible-boost-format msgid "" "%s\n" "Do you want to continue?" msgstr "" msgid "Remember my choice" msgstr "" msgid "Loading configuration" msgstr "" #, possible-c-format, possible-boost-format msgid "Click to download new version in default browser: %s" msgstr "" msgid "The QIDI Studio needs an upgrade" msgstr "" msgid "This is the newest version." msgstr "" msgid "Info" msgstr "" msgid "Rebuild" msgstr "" msgid "Loading current presets" msgstr "" msgid "Loading a mode view" msgstr "" msgid "Choose one file (3mf):" msgstr "" msgid "Choose one or more files (3mf/step/stl/svg/obj/amf/usd*/abc/ply):" msgstr "" msgid "Choose one or more files (3mf/step/stl/svg/obj/amf):" msgstr "" msgid "Choose one file (gcode/.gco/.g/.ngc/ngc):" msgstr "" msgid "Some presets are modified." msgstr "" msgid "You can keep the modified presets for the new project, discard or save changes as new presets." msgstr "" msgid "User logged out" msgstr "" msgid "Install network plug-in" msgstr "" msgid "Please Install network plug-in before log in." msgstr "" msgid "Install Network Plug-in" msgstr "" msgid "new or open project file is not allowed during the slicing process!" msgstr "" msgid "Open Project" msgstr "" msgid "The QIDI Studio version is too old to enable cloud service. Please download the latest version from QIDI Tech website." msgstr "" msgid "Your software certificate has been revoked, please update QIDI Studio software." msgstr "" msgid "Retrieving printer information, please try again later." msgstr "" msgid "Please try updating QIDI Studio and then try again." msgstr "" msgid "The certificate has expired. Please check the time settings or update QIDI Studio and try again." msgstr "" msgid "The certificate is no longer valid and the printing functions are unavailable. If you need printing. Please visit the official website at https://qidi3d.com/ to download and update." msgstr "" msgid "Internal error. Please try upgrading the firmware and Studio version. If the issue persists, contact customer support." msgstr "" msgid "Your software is not signed, and some printing functions have been restricted. Please use the officially signed software version." msgstr "" msgid "Privacy Policy Update" msgstr "" msgid "The number of user presets cached in the cloud has exceeded the upper limit, newly created user presets can only be used locally." msgstr "" msgid "Sync user presets" msgstr "" msgid "Loading user preset" msgstr "" msgid "Switching application language" msgstr "" msgid "Select the language" msgstr "" msgid "Language" msgstr "" msgid "*" msgstr "" msgid "The uploads are still ongoing" msgstr "" msgid "Stop them and continue anyway?" msgstr "" msgid "Ongoing uploads" msgstr "" msgid "Install presets failed" msgstr "" msgid "Select a G-code file:" msgstr "" msgid "Import File" msgstr "" msgid "Choose files" msgstr "" msgid "New Folder" msgstr "" msgid "Open" msgstr "" msgid "Rename" msgstr "" msgid "QIDI Studio GUI initialization failed" msgstr "" #, possible-boost-format msgid "Fatal error, exception caught: %1%" msgstr "" msgid "Quality" msgstr "" msgid "Shell" msgstr "" msgid "Infill" msgstr "" msgid "Support" msgstr "" msgid "Flush options" msgstr "" msgid "Speed" msgstr "" msgid "Strength" msgstr "" msgid "Ironing" msgstr "" msgid "Fuzzy Skin" msgstr "" msgid "Extruders" msgstr "" msgid "Extrusion Width" msgstr "" msgid "Wipe options" msgstr "" msgid "Bed adhension" msgstr "" msgid "Add part" msgstr "" msgid "Add negative part" msgstr "" msgid "Add modifier" msgstr "" msgid "Add support blocker" msgstr "" msgid "Add support enforcer" msgstr "" msgid "Add text" msgstr "" msgid "Add negative text" msgstr "" msgid "Add text modifier" msgstr "" msgid "Add SVG part" msgstr "" msgid "Add negative SVG" msgstr "" msgid "Add SVG modifier" msgstr "" msgid "Select settings" msgstr "" msgid "Hide" msgstr "" msgid "Show" msgstr "" msgid "Delete the selected object" msgstr "" msgid "Delete all cutter" msgstr "" msgid "Del" msgstr "" msgid "Edit Text" msgstr "" msgid "Edit SVG" msgstr "" msgid "Change SVG source file, projection, size, ..." msgstr "" msgid "Load..." msgstr "" msgid "Cube" msgstr "" msgid "Cylinder" msgstr "" msgid "Cone" msgstr "" msgid "Double Tear Romboid Cylinder" msgstr "" msgid "Disc" msgstr "" msgid "Torus" msgstr "" msgid "Rounded Rectangle" msgstr "" msgid "QIDI Cube" msgstr "" msgid "QIDI Cube V2" msgstr "" msgid "3DBenchy" msgstr "" msgid "ksr FDMTest" msgstr "" msgid "SVG" msgstr "" msgid "Height range Modifier" msgstr "" msgid "Add settings" msgstr "" msgid "Change type" msgstr "" msgid "Set as an individual object" msgstr "" msgid "Set as individual objects" msgstr "" msgid "Printable" msgstr "" msgid "Fix model" msgstr "" msgid "Export as one STL" msgstr "" msgid "Export as STLs" msgstr "" msgid "Reload from disk" msgstr "" msgid "Reload the selected parts from disk" msgstr "" msgid "Replace with STL" msgstr "" msgid "Replace the selected part with new STL" msgstr "" msgid "Change filament" msgstr "" msgid "Set filament for selected items" msgstr "" msgid "Default" msgstr "" #, possible-c-format, possible-boost-format msgid "Filament %d" msgstr "" msgid "current" msgstr "" msgid "Scale to build volume" msgstr "" msgid "Scale an object to fit the build volume" msgstr "" msgid "Flush Options" msgstr "" msgid "Flush into objects' infill" msgstr "" msgid "Flush into this object" msgstr "" msgid "Flush into objects' support" msgstr "" msgid "Edit in Parameter Table" msgstr "" msgid "Convert from inch" msgstr "" msgid "Restore to inch" msgstr "" msgid "Convert from meter" msgstr "" msgid "Restore to meter" msgstr "" msgid "Merge" msgstr "" msgid "Assemble the selected objects to an object with multiple parts" msgstr "" msgid "Assemble the selected objects to an object with single part" msgstr "" msgid "Mesh boolean" msgstr "" msgid "Mesh boolean operations including union and subtraction" msgstr "" msgid "Merge into Single Part" msgstr "" msgid "Merge the selected parts into one part" msgstr "" msgid "Along X axis" msgstr "" msgid "Mirror along the X axis" msgstr "" msgid "Along Y axis" msgstr "" msgid "Mirror along the Y axis" msgstr "" msgid "Along Z axis" msgstr "" msgid "Mirror along the Z axis" msgstr "" msgid "Mirror object" msgstr "" msgid "Invalidate cut info" msgstr "" msgid "Add Primitive" msgstr "" msgid "Show Labels" msgstr "" msgid "To objects" msgstr "" msgid "Split the selected object into multiple objects" msgstr "" msgid "To parts" msgstr "" msgid "Split the selected object into multiple parts" msgstr "" msgid "Split" msgstr "" msgid "Split the selected object" msgstr "" msgid "Auto orientation" msgstr "" msgid "Auto orient the object to improve print quality." msgstr "" msgid "Edit" msgstr "" msgid "Delete this filament" msgstr "" msgid "Merge with" msgstr "" msgid "Select All" msgstr "" msgid "select all objects on current plate" msgstr "" msgid "Delete All" msgstr "" msgid "delete all objects on current plate" msgstr "" msgid "Arrange" msgstr "" msgid "arrange current plate" msgstr "" msgid "Auto Rotate" msgstr "" msgid "auto rotate current plate" msgstr "" msgid "Delete Plate" msgstr "" msgid "Remove the selected plate" msgstr "" msgid "Move Plate" msgstr "" msgid "Clone" msgstr "" msgid "Simplify Model" msgstr "" msgid "Center" msgstr "" msgid "Align/Distribute" msgstr "" msgid "Align and distribute objects" msgstr "" msgid "Sub merge" msgstr "" msgid "Edit Process Settings" msgstr "" msgid "Copy Process Settings" msgstr "" msgid "Paste Process Settings" msgstr "" msgid "Edit print parameters for a single object" msgstr "" msgid "Change Filament" msgstr "" msgid "Set Filament for selected items" msgstr "" msgid "Unlock" msgstr "" msgid "Lock" msgstr "" msgid "Fill bed with copies" msgstr "" msgid "Fill the remaining area of bed with copies of the selected object" msgstr "" msgid "Edit Plate Name" msgstr "" msgid "Name" msgstr "" msgid "Fila." msgstr "" #, possible-c-format, possible-boost-format msgid "%1$d error repaired" msgid_plural "%1$d errors repaired" msgstr[0] "" msgstr[1] "" #, possible-c-format, possible-boost-format msgid "Error: %1$d non-manifold edge." msgid_plural "Error: %1$d non-manifold edges." msgstr[0] "" msgstr[1] "" msgid "Remaining errors" msgstr "" #, possible-c-format, possible-boost-format msgid "%1$d non-manifold edge" msgid_plural "%1$d non-manifold edges" msgstr[0] "" msgstr[1] "" msgid "Right click the icon to fix model object" msgstr "" msgid "Right button click the icon to drop the object settings" msgstr "" msgid "Click the icon to reset all settings of the object" msgstr "" msgid "Right button click the icon to drop the object printable property" msgstr "" msgid "Click the icon to toggle printable property of the object" msgstr "" msgid "Click the icon to edit support painting of the object" msgstr "" msgid "Click the icon to edit fuzzy skin painting of the object" msgstr "" msgid "Click the icon to edit color painting of the object" msgstr "" msgid "Click the icon to shift this object to the bed" msgstr "" msgid "Loading file" msgstr "" msgid "Error!" msgstr "" msgid "Failed to get the model data in the current file." msgstr "" msgid "Generic" msgstr "" msgid "Add Modifier" msgstr "" msgid "Switch to per-object setting mode to edit modifier settings." msgstr "" msgid "Sub-merged body" msgstr "" msgid "Switch to per-object setting mode to edit process settings of selected objects." msgstr "" msgid "Delete connector from object which is a part of cut" msgstr "" msgid "Delete solid part from object which is a part of cut" msgstr "" msgid "Delete negative volume from object which is a part of cut" msgstr "" msgid "To save cut correspondence you can delete all connectors from all related objects." msgstr "" msgid "" "This action will break a cut correspondence.\n" "After that model consistency can't be guaranteed .\n" "\n" "To manipulate solid parts or negative volumes you have to invalidate cut information first." msgstr "" msgid "Delete all connectors" msgstr "" msgid "Deleting the last solid part is not allowed." msgstr "" msgid "The target object contains only one part and can not be split." msgstr "" msgid "Assembly" msgstr "" msgid "Cut Connectors information" msgstr "" msgid "Object manipulation" msgstr "" msgid "Group manipulation" msgstr "" msgid "Object Settings to modify" msgstr "" msgid "Part Settings to modify" msgstr "" msgid "Layer range Settings to modify" msgstr "" msgid "Part manipulation" msgstr "" msgid "Instance manipulation" msgstr "" msgid "Height ranges" msgstr "" msgid "Settings for height range" msgstr "" msgid "Layer" msgstr "" msgid "Selection conflicts" msgstr "" msgid "If the first selected item is an object, the second one should also be an object." msgstr "" msgid "If the first selected item is a part, the second one should be part of the same object." msgstr "" msgid "The type of the last solid object part is not to be changed." msgstr "" msgid "Negative Part" msgstr "" msgid "Support Blocker" msgstr "" msgid "Support Enforcer" msgstr "" msgid "Type:" msgstr "" msgid "Choose part type" msgstr "" msgid "Enter new name" msgstr "" msgid "Renaming" msgstr "" msgid "Following model object has been repaired" msgid_plural "Following model objects have been repaired" msgstr[0] "" msgstr[1] "" msgid "Failed to repair the following model object" msgid_plural "Failed to repair the following model object" msgstr[0] "" msgstr[1] "" msgid "Repairing was canceled" msgstr "" msgid "Additional process preset" msgstr "" msgid "Remove parameter" msgstr "" msgid "to" msgstr "" msgid "Remove height range" msgstr "" msgid "Add height range" msgstr "" msgid "Invalid numeric." msgstr "" msgid "one cell can only be copied to one or multiple cells in the same column" msgstr "" msgid "multiple cells copy is not supported" msgstr "" msgid "Outside" msgstr "" msgid " " msgstr "" msgid "Layer height" msgstr "" msgid "Wall loops" msgstr "" msgid "Infill density(%)" msgstr "" msgid "Auto Brim" msgstr "" msgid "Auto" msgstr "" msgid "Painted" msgstr "" msgid "Outer brim only" msgstr "" msgid "Inner brim only" msgstr "" msgid "Outer and inner brim" msgstr "" msgid "No-brim" msgstr "" msgid "Outer wall speed" msgstr "" msgid "Plate" msgstr "" msgid "Brim" msgstr "" msgid "Object/Part Setting" msgstr "" msgid "Reset parameter" msgstr "" msgid "Multicolor Print" msgstr "" msgid "Line Type" msgstr "" msgid "Color" msgstr "" msgid "Pause" msgstr "" msgid "Template" msgstr "" msgid "Custom" msgstr "" msgid "Pause:" msgstr "" msgid "Custom Template:" msgstr "" msgid "Custom G-code:" msgstr "" msgid "Custom G-code" msgstr "" msgid "Enter Custom G-code used on current layer:" msgstr "" msgid "Jump to Layer" msgstr "" msgid "Please enter the layer number" msgstr "" msgid "Add Pause" msgstr "" msgid "Insert a pause command at the beginning of this layer." msgstr "" msgid "Add Custom G-code" msgstr "" msgid "Insert custom G-code at the beginning of this layer." msgstr "" msgid "Add Custom Template" msgstr "" msgid "Insert template custom G-code at the beginning of this layer." msgstr "" msgid "Filament " msgstr "" msgid "Change filament at the beginning of this layer." msgstr "" msgid "Delete Pause" msgstr "" msgid "Delete Custom Template" msgstr "" msgid "Edit Custom G-code" msgstr "" msgid "Delete Custom G-code" msgstr "" msgid "Delete Filament Change" msgstr "" msgid "No printer" msgstr "" msgid "..." msgstr "" msgid "Failed to connect to the server" msgstr "" msgid "Check the status of current system services" msgstr "" msgid "code" msgstr "" msgid "Failed to connect to cloud service" msgstr "" msgid "Please click on the hyperlink above to view the cloud service status" msgstr "" msgid "Failed to connect to the printer" msgstr "" msgid "Connection to printer failed" msgstr "" msgid "Please check the network connection of the printer and Studio." msgstr "" msgid "Connecting..." msgstr "" msgid "Auto-refill" msgstr "" msgid "Load" msgstr "" msgid "Unload" msgstr "" msgid "Choose an AMS slot then press \"Load\" or \"Unload\" button to automatically load or unload filaments." msgstr "" msgid "Filament type is unknown which is required to perform this action. Please set target filament's informations." msgstr "" msgid "Changing fan speed during printing may affect print quality, please choose carefully." msgstr "" msgid "Change Anyway" msgstr "" msgid "Off" msgstr "" msgid "Filter" msgstr "" msgid "Enabling filtration redirects the right fan to filter gas, which may reduce cooling performance." msgstr "" msgid "Enabling filtration during printing may reduce cooling and affect print qulity. Please choose carefully" msgstr "" msgid "The selected material only supports the current fan mode, and it can't be changed during printing." msgstr "" msgid "Cooling" msgstr "" msgid "Heating" msgstr "" msgid "Exhaust" msgstr "" msgid "Full Cooling" msgstr "" msgid "Init" msgstr "" msgid "Chamber" msgstr "" msgid "Innerloop" msgstr "" #. TRN To be shown in the main menu View->Top msgid "Top" msgstr "" msgid "The fan controls the temperature during printing to improve print quality.The system automatically adjusts the fan's switch and speed according to different printing materials." msgstr "" msgid "Cooling mode is suitable for printing PLA/PETG/TPU materials and filters the chamber air." msgstr "" msgid "Heating mode is suitable for printing ABS/ASA/PC/PA materials and circulates filters the chamber air." msgstr "" msgid "Strong cooling mode is suitable for printing PLA/TPU materials. In this mode, the printouts will be fully cooled." msgstr "" msgid "Cooling mode is suitable for printing PLA/PETG/TPU materials." msgstr "" msgctxt "air_duct" msgid "Right(Aux)" msgstr "" msgctxt "air_duct" msgid "Right(Filter)" msgstr "" msgctxt "air_duct" msgid "Left(Aux)" msgstr "" msgid "Hotend" msgstr "" msgid "Parts" msgstr "" msgid "Aux" msgstr "" msgid "Nozzle1" msgstr "" msgid "MC Board" msgstr "" msgid "Heat" msgstr "" msgid "Fan" msgstr "" msgid "Idling..." msgstr "" msgid "Heat the nozzle" msgstr "" msgid "Cut filament" msgstr "" msgid "Pull back current filament" msgstr "" msgid "Push new filament into extruder" msgstr "" msgid "Grab new filament" msgstr "" msgid "Purge old filament" msgstr "" msgid "Confirm extruded" msgstr "" msgid "Check filament location" msgstr "" msgid "The maximum temperature cannot exceed " msgstr "" msgid "The minmum temperature should not be less than " msgstr "" msgid "" "All the selected objects are on the locked plate,\n" "We can not do auto-arrange on these objects." msgstr "" msgid "No arrangeable objects are selected." msgstr "" msgid "The following plates are skipped due to different arranging settings from global:" msgstr "" msgid "" "This plate is locked,\n" "We can not do auto-arrange on this plate." msgstr "" msgid "Arranging" msgstr "" #, possible-boost-format msgid "Object %1% has zero size and can't be arranged." msgstr "" msgid "Arrange failed. Found some exceptions when processing object geometries." msgstr "" msgid "Arranging canceled." msgstr "" msgid "Arranging is done but there are unpacked items. Reduce spacing and try again." msgstr "" msgid "Arranging done." msgstr "" msgid "" "All the selected objects are on the locked plate,\n" "We can not do auto-orient on these objects." msgstr "" msgid "" "This plate is locked,\n" "We can not do auto-orient on this plate." msgstr "" msgid "Orienting..." msgstr "" msgid "Orienting" msgstr "" msgid "Filling" msgstr "" msgid "Bed filling canceled." msgstr "" msgid "Bed filling done." msgstr "" #. TRN: This is the title of the action appearing in undo/redo stack. #. It is same for Text and SVG. msgid "Emboss attribute change" msgstr "" msgid "Add Emboss text object" msgstr "" msgid "Add Emboss text Volume" msgstr "" msgid "Font doesn't have any shape for given text." msgstr "" msgid "There is no valid surface for text projection." msgstr "" msgid "Text mesh ie empty." msgstr "" msgid "Text" msgstr "" msgid "Error! Unable to create thread!" msgstr "" msgid "Exception" msgstr "" msgid "Logging in" msgstr "" msgid "Login failed" msgstr "" msgid "Please check the printer network connection." msgstr "" msgid "Abnormal print file data. Please slice again." msgstr "" msgid "Task canceled." msgstr "" msgid "Upload task timed out. Please check the network status and try again." msgstr "" msgid "Cloud service connection failed. Please try again." msgstr "" msgid "Print file not found. please slice again." msgstr "" msgid "The print file exceeds the maximum allowable size (1GB). Please simplify the model and slice again." msgstr "" msgid "Failed to send the print job. Please try again." msgstr "" msgid "Failed to upload file to ftp. Please try again." msgstr "" msgid "Check the current status of the qidi server by clicking on the link above." msgstr "" msgid "The size of the print file is too large. Please adjust the file size and try again." msgstr "" msgid "Print file not found, Please slice it again and send it for printing." msgstr "" msgid "Failed to upload print file to FTP. Please check the network status and try again." msgstr "" msgid "Sending print job over LAN" msgstr "" msgid "Sending print job through cloud service" msgstr "" msgid "Print task sending times out." msgstr "" msgid "Service Unavailable" msgstr "" msgid "Unknown Error." msgstr "" msgid "Sending print configuration" msgstr "" #, possible-c-format, possible-boost-format msgid "Successfully sent. Will automatically jump to the device page in %ss" msgstr "" #, possible-c-format, possible-boost-format msgid "Successfully sent. Will automatically jump to the next page in %ss" msgstr "" msgid "Storage needs to be inserted before printing via LAN." msgstr "" msgid "Sending gcode file over LAN" msgstr "" msgid "Sending gcode file to sdcard" msgstr "" #, possible-c-format, possible-boost-format msgid "Successfully sent. Close current page in %s s" msgstr "" msgid "Storage needs to be inserted before sending to printer." msgstr "" msgid "Thermal Preconditioning for first layer optimization" msgstr "" msgid "Remaining time: Calculating..." msgstr "" msgid "The heated bed's thermal preconditioning helps optimize the first layer print quality. Printing will start once preconditioning is complete." msgstr "" #, possible-c-format, possible-boost-format msgid "Remaining time: %dmin%ds" msgstr "" msgid "Choose SLA archive:" msgstr "" msgid "Import file" msgstr "" msgid "Import model and profile" msgstr "" msgid "Import profile only" msgstr "" msgid "Import model only" msgstr "" msgid "Accurate" msgstr "" msgid "Balanced" msgstr "" msgid "Quick" msgstr "" msgid "Importing SLA archive" msgstr "" msgid "The SLA archive doesn't contain any presets. Please activate some SLA printer preset first before importing that SLA archive." msgstr "" msgid "Importing canceled." msgstr "" msgid "Importing done." msgstr "" msgid "The imported SLA archive did not contain any presets. The current SLA presets were used as fallback." msgstr "" msgid "You cannot load SLA project with a multi-part object on the bed" msgstr "" msgid "Please check your object list before preset changing." msgstr "" msgid "Attention!" msgstr "" msgid "Downloading" msgstr "" msgid "Download failed" msgstr "" msgid "Cancelled" msgstr "" msgid "Install successfully." msgstr "" msgid "Installing" msgstr "" msgid "Install failed" msgstr "" msgid "Portions copyright" msgstr "" msgid "Copyright" msgstr "" msgid "License" msgstr "" msgid "QIDI Studio is licensed under " msgstr "" msgid "GNU Affero General Public License, version 3" msgstr "" msgid "QIDI Studio is based on PrusaSlicer by Prusa Research, which is from Slic3r by Alessandro Ranellucci and the RepRap community" msgstr "" msgid "Libraries" msgstr "" msgid "This software uses open source components whose copyright and other proprietary rights belong to their respective owners" msgstr "" #, possible-c-format, possible-boost-format msgid "About %s" msgstr "" msgid "QIDI Studio is based on PrusaSlicer by PrusaResearch and SuperSlicer by Merill(supermerill)." msgstr "" msgid "PrusaSlicer is originally based on Slic3r by Alessandro Ranellucci." msgstr "" msgid "Slic3r was created by Alessandro Ranellucci with the help of many other contributors." msgstr "" msgid "QIDI Studio also referenced some ideas from Cura by Ultimaker." msgstr "" msgid "There many parts of the software that come from community contributions, so we're unable to list them one-by-one, and instead, they'll be attributed in the corresponding code comments." msgstr "" msgid "AMS Materials Setting" msgstr "" msgid "Confirm" msgstr "" msgid "Close" msgstr "" msgid "Colour" msgstr "" msgid "" "Nozzle\n" "Temperature" msgstr "" msgid "max" msgstr "" msgid "min" msgstr "" #, possible-boost-format msgid "The input value should be greater than %1% and less than %2%" msgstr "" msgid "Factors of Flow Dynamics Calibration" msgstr "" msgid "Nozzle Type" msgstr "" msgid "PA Profile" msgstr "" msgid "Factor K" msgstr "" msgid "Factor N" msgstr "" msgid "Setting AMS slot information while printing is not supported" msgstr "" msgid "Setting Virtual slot information while printing is not supported" msgstr "" msgid "Are you sure you want to clear the filament information?" msgstr "" msgid "You need to select the material type and color first." msgstr "" #, possible-c-format, possible-boost-format msgid "Please input a valid value (K in %.1f~%.1f)" msgstr "" #, possible-c-format, possible-boost-format msgid "Please input a valid value (K in %.1f~%.1f, N in %.1f~%.1f)" msgstr "" msgid "Standard Flow" msgstr "" msgid "Note: The hotend number on the right extruder is tied to the holder. When the hotend is moved to a new holder, its number will update automatically." msgstr "" msgid "" "The nozzle flow is not set. Please set the nozzle flow rate before editing the filament.\n" "'Device -> Print parts'" msgstr "" msgid "AMS" msgstr "" msgid "Other Color" msgstr "" msgid "Custom Color" msgstr "" msgid "Dynamic flow calibration" msgstr "" msgid "The nozzle temp and max volumetric speed will affect the calibration results. Please fill in the same values as the actual printing. They can be auto-filled by selecting a filament preset." msgstr "" msgid "Nozzle Diameter" msgstr "" msgid "Bed Type" msgstr "" msgid "Nozzle temperature" msgstr "" msgid "Bed Temperature" msgstr "" msgid "Max volumetric speed" msgstr "" msgid "Bed temperature" msgstr "" msgid "Start calibration" msgstr "" msgid "Next" msgstr "" msgid "Calibration completed. Please find the most uniform extrusion line on your hot bed like the picture below, and fill the value on its left side into the factor K input box." msgstr "" msgid "Save" msgstr "" msgid "Last Step" msgstr "" msgid "Example" msgstr "" #, possible-c-format, possible-boost-format msgid "Calibrating... %d%%" msgstr "" msgid "Calibration completed" msgstr "" #, possible-c-format, possible-boost-format msgid "%s does not support %s" msgstr "" msgid "Dynamic flow Calibration" msgstr "" msgid "Step" msgstr "" msgid "Unmapped" msgstr "" msgid "" "Upper half area: Original\n" "Lower half area: The filament from original project will be used when unmapped.\n" "And you can click it to modify" msgstr "" msgid "" "Upper half area: Original\n" "Lower half area: Filament in AMS\n" "And you can click it to modify" msgstr "" msgid "" "Upper half area: Original\n" "Lower half area: Filament in AMS\n" "And you cannot click it to modify" msgstr "" msgid "AMS Slots" msgstr "" msgid "Please select from the following filaments" msgstr "" msgid "Select filament that installed to the left nozzle" msgstr "" msgid "Select filament that installed to the right nozzle" msgstr "" msgid "Left AMS" msgstr "" msgid "External" msgstr "" msgid "Reset current filament mapping" msgstr "" msgid "Right AMS" msgstr "" msgid "Left Nozzle" msgstr "" msgid "Right Nozzle" msgstr "" msgid "Nozzle" msgstr "" msgid "Ext" msgstr "" msgid "Select Filament && Hotends" msgstr "" msgid "Select Filament" msgstr "" #, possible-c-format, possible-boost-format msgid "Printing with the current nozzle may produce an extra %0.2f g of waste." msgstr "" #, possible-c-format, possible-boost-format msgid "Note: the filament type(%s) does not match with the filament type(%s) in the slicing file. If you want to use this slot, you can install %s instead of %s and change slot information on the 'Device' page." msgstr "" #, possible-c-format, possible-boost-format msgid "Note: the slot is empty or undefined. If you want to use this slot, you can install %s and change slot information on the 'Device' page." msgstr "" msgid "Note: Only filament-loaded slots can be selected." msgstr "" msgid "Enable AMS" msgstr "" msgid "Print with filaments in the AMS" msgstr "" msgid "Disable AMS" msgstr "" msgid "Print with the filament mounted on the back of chassis" msgstr "" msgid "Please change the desiccant when it is too wet. The indicator may not represent accurately in following cases : when the lid is open or the desiccant pack is changed. it take hours to absorb the moisture, low temperatures also slow down the process." msgstr "" msgid "Config which AMS slot should be used for a filament used in the print job" msgstr "" msgid "Filament used in this print job" msgstr "" msgid "AMS slot used for this filament" msgstr "" msgid "Click to select AMS slot manually" msgstr "" msgid "Do not Enable AMS" msgstr "" msgid "Print using materials mounted on the back of the case" msgstr "" msgid "Print with filaments in AMS" msgstr "" msgid "Print with filaments mounted on the back of the chassis" msgstr "" msgid "Auto Refill" msgstr "" msgid "Left" msgstr "" msgid "Right" msgstr "" msgid "When the current material run out, the printer will continue to print in the following order." msgstr "" msgid "Identical filament: same brand, type and color" msgstr "" msgid "Group" msgstr "" msgid "When the current material runs out, the printer would use identical filament to continue printing." msgstr "" msgid "The printer does not currently support auto refill." msgstr "" msgid "AMS filament backup is not enabled, please enable it in the AMS settings." msgstr "" msgid "" "When the current filament runs out, the printer will use identical filament to continue printing.\n" "*Identical filament: same brand, type and color." msgstr "" msgid "DRY" msgstr "" msgid "WET" msgstr "" msgid "AMS Settings" msgstr "" msgid "Insertion update" msgstr "" msgid "The AMS will automatically read the filament information when inserting a new QIDI Tech filament. This takes about 20 seconds." msgstr "" msgid "Note: if a new filament is inserted during printing, the AMS will not automatically read any information until printing is completed." msgstr "" msgid "When inserting a new filament, the AMS will not automatically read its information, leaving it blank for you to enter manually." msgstr "" msgid "Power on update" msgstr "" msgid "The AMS will automatically read the information of inserted filament on start-up. It will take about 1 minute.The reading process will roll filament spools." msgstr "" msgid "The AMS will not automatically read information from inserted filament during startup and will continue to use the information recorded before the last shutdown." msgstr "" msgid "Update remaining capacity" msgstr "" msgid "AMS will attempt to estimate the remaining capacity of the QIDI Tech filaments." msgstr "" msgid "AMS filament backup" msgstr "" msgid "AMS will continue to another spool with the same properties of filament automatically when current filament runs out" msgstr "" msgid "Air Printing Detection" msgstr "" msgid "Detects clogging and filament grinding, halting printing immediately to conserve time and filament." msgstr "" msgid "Box Type" msgstr "" msgid "Switching" msgstr "" msgid "The printer is busy and cannot switch AMS type." msgstr "" msgid "Please unload all filament before switching." msgstr "" msgid "Box type switching needs firmware update, taking about 30s. Switch now ?" msgstr "" msgid "Arrange AMS Order" msgstr "" msgid "Box ID will be reset. If you want a specific ID sequence, disconnect all AMS before resetting and connect them in the desired order after resetting." msgstr "" msgid "File" msgstr "" msgid "Calibration" msgstr "" msgid "Failed to download the plug-in. Please check your firewall settings and vpn software, check and retry." msgstr "" msgid "Failed to install the plug-in. Please check whether it is blocked or deleted by anti-virus software." msgstr "" msgid "click here to see more info" msgstr "" msgid "Please home all axes (click " msgstr "" msgid ") to locate the toolhead's position. This prevents device moving beyond the printable boundary and causing equipment wear." msgstr "" msgid "Go Home" msgstr "" msgid "An error occurred. Maybe memory of system is not enough or it's a bug of the program" msgstr "" msgid "Please save project and restart the program. " msgstr "" msgid "Processing G-Code from Previous file..." msgstr "" msgid "Slicing complete" msgstr "" msgid "Access violation" msgstr "" msgid "Illegal instruction" msgstr "" msgid "Divide by zero" msgstr "" msgid "Overflow" msgstr "" msgid "Underflow" msgstr "" msgid "Floating reserved operand" msgstr "" msgid "Stack overflow" msgstr "" msgid "Running post-processing scripts" msgstr "" msgid "Successfully executed post-processing script" msgstr "" msgid "Unknown error when export G-code." msgstr "" #, possible-boost-format msgid "" "Failed to save gcode file.\n" "Error message: %1%.\n" "Source file %2%." msgstr "" msgid "Copying of the temporary G-code to the output G-code failed" msgstr "" #, possible-boost-format msgid "Scheduling upload to `%1%`. See Window -> Print Host Upload Queue" msgstr "" msgid "Origin" msgstr "" msgid "Size in X and Y of the rectangular plate." msgstr "" msgid "Distance of the 0,0 G-code coordinate from the front left corner of the rectangle." msgstr "" msgid "Diameter of the print bed. It is assumed that origin (0,0) is located in the center." msgstr "" msgid "Rectangular" msgstr "" msgid "Circular" msgstr "" msgid "Settings" msgstr "" msgid "Texture" msgstr "" msgid "Remove" msgstr "" msgid "Not found:" msgstr "" msgid "Model" msgstr "" msgid "Choose an STL file to import bed shape from:" msgstr "" msgid "Invalid file format." msgstr "" msgid "Error! Invalid model" msgstr "" msgid "The selected file contains no geometry." msgstr "" msgid "The selected file contains several disjoint areas. This is not supported." msgstr "" msgid "Choose a file to import bed texture from (PNG/SVG):" msgstr "" #, possible-c-format, possible-boost-format msgid "The file exceeds %d MB, please import again." msgstr "" msgid "Exception in obtaining file size, please import again." msgstr "" msgid "Choose an STL file to import bed model from:" msgstr "" msgid "Bed Shape" msgstr "" msgid "The recommended minimum temperature is less than 190 degree or the recommended maximum temperature is greater than 300 degree.\n" msgstr "" msgid "The recommended minimum temperature cannot be higher than the recommended maximum temperature.\n" msgstr "" msgid "Please check.\n" msgstr "" msgid "" "Nozzle may be blocked when the temperature is out of recommended range.\n" "Please confirm whether to use the temperature for printing.\n" "\n" msgstr "" #, possible-c-format, possible-boost-format msgid "Recommended nozzle temperature of this filament type is [%d, %d] degree centigrade" msgstr "" msgid "" "Too small max volumetric speed.\n" "Reset to 0.5" msgstr "" msgid "" "Should not large than 100%.\n" "Reset to defualt" msgstr "" #, possible-c-format, possible-boost-format msgid "Current chamber temperature is higher than the material's safe temperature,it may result in material softening and clogging.The maximum safe temperature for the material is %d" msgstr "" msgid "" "Too small layer height.\n" "Reset to 0.2" msgstr "" msgid "" "Too large layer height.\n" "Reset to 0.2" msgstr "" msgid "" "Should not large than layer height.\n" "Reset to 10%" msgstr "" msgid "" "Too small ironing spacing.\n" "Reset to 0.1" msgstr "" msgid "" "Zero initial layer height is invalid.\n" "\n" "The first layer height will be reset to 0.2." msgstr "" msgid "" "This setting is only used for model size tuning with small value in some cases.\n" "For example, when the model size has slight errors and is difficult be assembled.\n" "For large size tuning, please use model scaling function.\n" "\n" "The value will be reset to 0." msgstr "" msgid "" "Too large elephant foot compensation is unreasonable.\n" "If really have serious elephant foot effect, please check other settings.\n" "For example, whether bed temperature is too high.\n" "\n" "The value will be reset to 0." msgstr "" msgid "" "Prime tower does not work when Adaptive Layer Height or Independent Support Layer Height is on.\n" "Which do you want to keep?\n" "YES - Keep Prime Tower\n" "NO - Keep Adaptive Layer Height and Independent Support Layer Height" msgstr "" msgid "" "Prime tower does not work when Adaptive Layer Height is on.\n" "Which do you want to keep?\n" "YES - Keep Prime Tower\n" "NO - Keep Adaptive Layer Height" msgstr "" msgid "" "Prime tower does not work when Independent Support Layer Height is on.\n" "Which do you want to keep?\n" "YES - Keep Prime Tower\n" "NO - Keep Independent Support Layer Height" msgstr "" #, possible-boost-format msgid "%1% infill pattern doesn't support 100%% density." msgstr "" msgid "" "Switch to rectilinear pattern?\n" "Yes - switch to rectilinear pattern automatically\n" "No - reset density to default non 100% value automatically" msgstr "" msgid "" "While printing by Object, the extruder may collide skirt.\n" "Thus, reset the skirt layer to 1 to avoid that." msgstr "" #, possible-c-format, possible-boost-format msgid "" "lock depth should smaller than skin depth.\n" "Reset to 50%% of skin depth" msgstr "" msgid "Spiral mode only works when wall loops is 1, support is disabled, clumping detection by probing is disabled, top shell layers is 0, sparse infill density is 0, timelapse type is traditional and smoothing wall speed in z direction is false." msgstr "" msgid " But machines with I3 structure will not generate timelapse videos." msgstr "" msgid "" "Change these settings automatically? \n" "Yes - Change these settings and enable spiral mode automatically\n" "No - Give up using spiral mode this time" msgstr "" msgid "Printing" msgstr "" msgid "Auto bed leveling" msgstr "" msgid "Heatbed preheating" msgstr "" msgid "Vibration compensation" msgstr "" msgid "Changing filament" msgstr "" msgid "M400 pause" msgstr "" msgid "Paused (filament ran out)" msgstr "" msgid "Heating nozzle" msgstr "" msgid "Calibrating dynamic flow" msgstr "" msgid "Scanning bed surface" msgstr "" msgid "Inspecting first layer" msgstr "" msgid "Identifying build plate type" msgstr "" msgid "Calibrating Micro Lidar" msgstr "" msgid "Homing toolhead" msgstr "" msgid "Cleaning nozzle tip" msgstr "" msgid "Checking extruder temperature" msgstr "" msgid "Paused by the user" msgstr "" msgid "Pause (front cover fall off)" msgstr "" msgid "Calibrating the micro lidar" msgstr "" msgid "Calibrating flow ratio" msgstr "" msgid "Pause (nozzle temperature malfunction)" msgstr "" msgid "Pause (heatbed temperature malfunction)" msgstr "" msgid "Filament unloading" msgstr "" msgid "Pause (step loss)" msgstr "" msgid "Filament loading" msgstr "" msgid "Motor noise cancellation" msgstr "" msgid "Pause (AMS offline)" msgstr "" msgid "Pause (low speed of the heatbreak fan)" msgstr "" msgid "Pause (chamber temperature control problem)" msgstr "" msgid "Cooling chamber" msgstr "" msgid "Pause (Gcode inserted by user)" msgstr "" msgid "Motor noise showoff" msgstr "" msgid "Pause (nozzle clumping)" msgstr "" msgid "Pause (cutter error)" msgstr "" msgid "Pause (first layer error)" msgstr "" msgid "Pause (nozzle clog)" msgstr "" msgid "Measuring motion percision" msgstr "" msgid "Enhancing motion percision" msgstr "" msgid "Measure motion accuracy" msgstr "" msgid "Nozzle offset calibration" msgstr "" msgid "high temperature auto bed levelling" msgstr "" msgid "Auto Check: Quick Release Lever" msgstr "" msgid "Auto Check: Door and Upper Cover" msgstr "" msgid "Laser Calibration" msgstr "" msgid "Auto Check: Platform" msgstr "" msgid "Confirming BirdsEye Camera location" msgstr "" msgid "Calibrating BirdsEye Camera" msgstr "" msgid "Auto bed leveling -phase 1" msgstr "" msgid "Auto bed leveling -phase 2" msgstr "" msgid "Heating chamber" msgstr "" msgid "Cooling heatbed" msgstr "" msgid "Printing calibration lines" msgstr "" msgid "Auto Check: Material" msgstr "" msgid "Live View Camera Calibration" msgstr "" msgid "Waiting for heatbed to reach target temperature" msgstr "" msgid "Auto Check: Material Position" msgstr "" msgid "Cutting Module Offset Calibration" msgstr "" msgid "Measuring Surface" msgstr "" msgid "Homing Blade Holder" msgstr "" msgid "Calibrating Camera Offset" msgstr "" msgid "Calibrating Blade Holder Position" msgstr "" msgid "Hotend Pick and Place Test" msgstr "" msgid "Waiting for the Chamber temperature to equalize" msgstr "" msgid " Preparing Hotend" msgstr "" msgid "Calibrating the detection position of nozzle clumping" msgstr "" msgid "Purifying the chamber air" msgstr "" msgid "Timelapse is not supported on this printer." msgstr "" msgid "Timelapse is not supported while the storage does not exist." msgstr "" msgid "Timelapse is not supported while the storage is unavailable." msgstr "" msgid "Timelapse is not supported while the storage is readonly." msgstr "" msgid "To ensure your safety, certain processing tasks (such as laser) can only be resumed on printer." msgstr "" #, possible-c-format, possible-boost-format msgid "The chamber temperature is too high, which may cause the filament to soften. Please wait until the chamber temperature drops below %d℃. You may open the front door or enable fans to cool down." msgstr "" #, possible-c-format, possible-boost-format msgid "AMS temperature is too high, which may cause the filament to soften. Please wait until the AMS temperature drops below %d℃." msgstr "" msgid "The current chamber temperature or the target chamber temperature exceeds 45℃.In order to avoid extruder clogging,low temperature filament(PLA/PETG/TPU) is not allowed to be loaded." msgstr "" msgid "Low temperature filament(PLA/PETG/TPU) is loaded in the extruder.In order to avoid extruder clogging,it is not allowed to set the chamber temperature." msgstr "" msgid "When you set the chamber temperature below 40℃, the chamber temperature control will not be activated. And the target chamber temperature will automatically be set to 0℃." msgstr "" msgid "Failed to start printing job" msgstr "" msgid "This calibration does not support the currently selected nozzle diameter" msgstr "" msgid "Current flowrate cali param is invalid" msgstr "" msgid "Selected diameter and machine diameter do not match" msgstr "" msgid "Failed to generate cali gcode" msgstr "" msgid "Calibration error" msgstr "" msgid "Resume Printing" msgstr "" msgid "Resume (defects acceptable)" msgstr "" msgid "Resume (problem solved)" msgstr "" msgid "Stop Printing" msgstr "" msgid "Check Assistant" msgstr "" msgid "Filament Extruded, Continue" msgstr "" msgid "Not Extruded Yet, Retry" msgstr "" msgid "Finished, Continue" msgstr "" msgid "Load Filament" msgstr "" msgid "Filament Loaded, Resume" msgstr "" msgid "View Liveview" msgstr "" msgid "No Reminder Next Time" msgstr "" msgid "Ignore. Don't Remind Next Time" msgstr "" msgid "Ignore this and Resume" msgstr "" msgid "Problem Solved and Resume" msgstr "" msgid "Got it, Turn off the Fire Alarm." msgstr "" msgid "Retry (problem solved)" msgstr "" msgid "Cancle" msgstr "" msgid "Stop Drying" msgstr "" msgid "Proceed" msgstr "" msgid "Abort" msgstr "" msgid "Done" msgstr "" msgid "Retry" msgstr "" msgid "Resume" msgstr "" msgid "Unknown error." msgstr "" msgid "default" msgstr "" msgid "parameter name" msgstr "" msgid "N/A" msgstr "" #, possible-c-format, possible-boost-format msgid "%s can't be percentage" msgstr "" #, possible-c-format, possible-boost-format msgid "Value %s is out of range, continue?" msgstr "" msgid "Parameter validation" msgstr "" #, possible-c-format, possible-boost-format msgid "Value %s is out of range. The valid range is from %d to %d." msgstr "" msgid "Value is out of range." msgstr "" #, possible-c-format, possible-boost-format msgid "" "Is it %s%% or %s %s?\n" "YES for %s%%, \n" "NO for %s %s." msgstr "" #, possible-boost-format msgid "Invalid format. Expected vector format: \"%1%\"" msgstr "" msgid "Clear color" msgstr "" msgid "Loading G-codes" msgstr "" msgid "Loading gcode data" msgstr "" msgid "Loading segments" msgstr "" msgid "Summary" msgstr "" msgid "Layer Height" msgstr "" msgid "Line Width" msgstr "" msgid "Fan Speed" msgstr "" msgid "Flow" msgstr "" msgid "Tool" msgstr "" msgid "Layer Time" msgstr "" msgid "Thermal Index (min)" msgstr "" msgid "Thermal Index (max)" msgstr "" msgid "Thermal Index (mean)" msgstr "" msgid "Statistics of All Plates" msgstr "" msgid "Display" msgstr "" msgid "Flushed" msgstr "" msgid "Tower" msgstr "" msgid "Total" msgstr "" msgid "Total cost" msgstr "" msgid "Time" msgstr "" msgid "Time Estimation" msgstr "" msgid "up to" msgstr "" msgid "above" msgstr "" msgid "from" msgstr "" msgid "Slicing Result" msgstr "" msgid "Color Scheme" msgstr "" msgid "Percent" msgstr "" msgid "Used filament" msgstr "" msgid "Layer Height (mm)" msgstr "" msgid "Line Width (mm)" msgstr "" msgid "Speed (mm/s)" msgstr "" msgid "Fan Speed (%)" msgstr "" msgid "Temperature (°C)" msgstr "" msgid "Volumetric flow rate (mm³/s)" msgstr "" msgid "Travel" msgstr "" msgid "Seams" msgstr "" msgid "Retract" msgstr "" msgid "Unretract" msgstr "" msgid "Filament Changes" msgstr "" msgid "Wipe" msgstr "" msgid "Options" msgstr "" msgid "travel" msgstr "" msgid "Extruder" msgstr "" msgid "Cost" msgstr "" msgid "Total time" msgstr "" msgid "Filament change times" msgstr "" msgid "Color change" msgstr "" msgid "Print" msgstr "" msgid "Printer" msgstr "" msgid "Print settings" msgstr "" msgid "Total Estimation" msgstr "" msgid "Normal mode" msgstr "" msgid "Total Filament" msgstr "" msgid "Model Filament" msgstr "" msgid "Prepare and timelapse time" msgstr "" msgid "Prepare time" msgstr "" msgid "Model printing time" msgstr "" msgid "Switch to silent mode" msgstr "" msgid "Switch to normal mode" msgstr "" msgid "Automatically re-slice according to the optimal filament grouping, and the grouping results will be displayed after slicing." msgstr "" msgid "Filament Grouping" msgstr "" msgid "Why this grouping" msgstr "" msgid "Left nozzle" msgstr "" msgid "Right nozzle" msgstr "" msgid "Please place filaments on the printer based on grouping result." msgstr "" msgid "Tips:" msgstr "" msgid "Current grouping of slice result is not optimal." msgstr "" #, possible-boost-format msgid "Increase %1%g filament and %2% changes compared to optimal grouping." msgstr "" #, possible-boost-format msgid "Increase %1%g filament and save %2% changes compared to optimal grouping." msgstr "" #, possible-boost-format msgid "Save %1%g filament and increase %2% changes compared to optimal grouping." msgstr "" #, possible-boost-format msgid "Save %1%g filament and %2% changes compared to a printer with one nozzle." msgstr "" #, possible-boost-format msgid "Save %1%g filament and increase %2% changes compared to a printer with one nozzle." msgstr "" #, possible-boost-format msgid "Increase %1%g filament and save %2% changes compared to a printer with one nozzle." msgstr "" msgid "Set to Optimal" msgstr "" msgid "Regroup filament" msgstr "" msgid "Height: " msgstr "" msgid "Width: " msgstr "" msgid "Speed: " msgstr "" msgid "Flow: " msgstr "" msgid "Layer Time: " msgstr "" msgid "Fan Speed: " msgstr "" msgid "Temperature: " msgstr "" msgid "Thermal Index" msgstr "" msgid "Min: " msgstr "" msgid "Max: " msgstr "" msgid "Mean: " msgstr "" msgid "Generating geometry vertex data" msgstr "" msgid "Generating geometry index data" msgstr "" msgid "" "An object is placed in the left/right nozzle-only area or exceeds the printable height of the left nozzle.\n" "Please ensure the filaments used by this object are not arranged to other nozzles." msgstr "" msgid "" "An object is laid over the boundary of plate or exceeds the height limit.\n" "Please solve the problem by moving it totally on or off the plate, and confirming that the height is within the build volume." msgstr "" msgid "Variable layer height" msgstr "" msgid "Adaptive" msgstr "" msgid "Quality / Speed" msgstr "" msgid "Smooth" msgstr "" msgid "Radius" msgstr "" msgid "Keep min" msgstr "" msgid "Left mouse button:" msgstr "" msgid "Add detail" msgstr "" msgid "Right mouse button:" msgstr "" msgid "Remove detail" msgstr "" msgid "Shift + Left mouse button:" msgstr "" msgid "Reset to base" msgstr "" msgid "Shift + Right mouse button:" msgstr "" msgid "Smoothing" msgstr "" msgid "Mouse wheel:" msgstr "" msgid "Increase/decrease edit area" msgstr "" msgid "Sequence" msgstr "" msgid "object selection" msgstr "" msgid "part selection" msgstr "" msgid "number keys" msgstr "" msgid "number keys can quickly change the color of objects" msgstr "" msgid "Following objects are laid over the boundary of plate or exceeds the height limit:\n" msgstr "" msgid "Please solve the problem by moving it totally on or off the plate, and confirming that the height is within the build volume.\n" msgstr "" #, possible-boost-format msgid "Assembly's bounding box is too large ( max size >= %1% in ) which may cause rendering issues.\n" msgstr "" #, possible-boost-format msgid "Assembly's bounding box is too large ( max size >= %1% mm ) which may cause rendering issues.\n" msgstr "" #, possible-boost-format msgid "Following objects are too far ( distance >= %1% in ) from the original of the world coordinate system:\n" msgstr "" #, possible-boost-format msgid "Following objects are too far ( distance >= %1% mm ) from the original of the world coordinate system:\n" msgstr "" msgid "left nozzle" msgstr "" msgid "right nozzle" msgstr "" #, possible-c-format, possible-boost-format msgid "The position or size of some models exceeds the %s's printable range." msgstr "" #, possible-c-format, possible-boost-format msgid "The position or size of the model %s exceeds the %s's printable range." msgstr "" msgid " Please check and adjust the part's position or size to fit the printable range:\n" msgstr "" #, possible-boost-format msgid "Left nozzle: X:%1%-%2%, Y:%3%-%4%, Z:%5%-%6%\n" msgstr "" #, possible-boost-format msgid "Right nozzle: X:%1%-%2%, Y:%3%-%4%, Z:%5%-%6%" msgstr "" msgid "Mirror Object" msgstr "" msgid "Tool Move" msgstr "" msgid "Tool Rotate" msgstr "" msgid "Move Object" msgstr "" msgid "Auto Orientation options" msgstr "" msgid "Enable rotation" msgstr "" msgid "Optimize support interface area" msgstr "" msgid "Orient" msgstr "" msgid "Arrange options" msgstr "" msgid "Spacing" msgstr "" msgid "0 means auto spacing." msgstr "" msgid "Save SVG" msgstr "" msgid "Auto rotate for arrangement" msgstr "" msgid "Allow multiple materials on same plate" msgstr "" msgid "Avoid extrusion calibration region" msgstr "" msgid "Align to Y axis" msgstr "" msgctxt "Camera" msgid "Left" msgstr "" msgctxt "Camera" msgid "Right" msgstr "" msgid "Add" msgstr "" msgid "Add plate" msgstr "" msgid "Auto orient" msgstr "" msgid "Arrange all objects" msgstr "" msgid "Arrange objects on selected plates" msgstr "" msgid "Split to objects" msgstr "" msgid "And it is valid when there are at least two parts in object or stl has at least two meshes." msgstr "" msgid "Split to parts" msgstr "" msgid "And it is valid when importing an stl with at least two meshes." msgstr "" msgid "Click to Extend" msgstr "" msgid "Click to Collapse" msgstr "" msgid "Assembly View" msgstr "" msgid "Select Plate" msgstr "" msgid "Assembly Return" msgstr "" msgid "return" msgstr "" msgid "Fit camera" msgstr "" msgid "Fit camera to scene or selected object." msgstr "" msgid "Paint Toolbar" msgstr "" msgid "Explosion Ratio" msgstr "" msgid "Section View" msgstr "" msgid "Assemble Control" msgstr "" msgid "Selection Mode" msgstr "" msgid "Total Volume:" msgstr "" msgid "Assembly Info" msgstr "" msgid "Volume:" msgstr "" msgid "Size:" msgstr "" #, possible-c-format, possible-boost-format msgid "Conflicts of gcode paths have been found at layer %d. Please separate the conflicted objects farther (%s <-> %s)." msgstr "" msgid "An object is layed over the boundary of plate." msgstr "" msgid "A G-code path goes beyond the max print height." msgstr "" msgid "A G-code path goes beyond the boundary of plate." msgstr "" msgid "Not support printing 2 or more TPU filaments." msgstr "" #, possible-c-format, possible-boost-format msgid "Filament %s is placed in the %s, but the generated G-code path exceeds the printable range of the %s." msgstr "" #, possible-c-format, possible-boost-format msgid "Filaments %s is placed in the %s, but the generated G-code path exceeds the printable range of the %s." msgstr "" #, possible-c-format, possible-boost-format msgid "Filament %s is placed in the %s, but the generated G-code path exceeds the printable height of the %s." msgstr "" #, possible-c-format, possible-boost-format msgid "Filaments %s is placed in the %s, but the generated G-code path exceeds the printable height of the %s." msgstr "" msgid "Open wiki for more information." msgstr "" msgid "Only the object being edited is visible." msgstr "" #, possible-c-format, possible-boost-format msgid "filaments %s cannot be printed directly on the surface of this plate." msgstr "" msgid "PLA and PETG filaments detected in the mixture. Adjust parameters according to the Wiki to ensure print quality." msgstr "" msgid "The prime tower extends beyond the plate boundary." msgstr "" msgid "Partial flushing volume set to 0. Multi-color printing may cause color mixing in models. Please redjust flushing settings." msgstr "" msgid "Click Wiki for help." msgstr "" msgid "Click here to regroup" msgstr "" msgid "Flushing Volume" msgstr "" msgid "Calibration step selection" msgstr "" msgid "Micro lidar calibration" msgstr "" msgid "Bed leveling" msgstr "" msgid "High-temperature Heatbed Calibration" msgstr "" msgid "Nozzle clumping detection Calibration" msgstr "" msgid "Calibration program" msgstr "" msgid "" "The calibration program detects the status of your device automatically to minimize deviation.\n" "It keeps the device performing optimally." msgstr "" msgid "Calibration Flow" msgstr "" msgid "Start Calibration" msgstr "" msgid "Completed" msgstr "" msgid "Calibrating" msgstr "" msgid "No step selected" msgstr "" msgid "Auto-record Monitoring" msgstr "" msgid "Go Live" msgstr "" msgid "Liveview Retry" msgstr "" msgid "Resolution" msgstr "" msgid "Show \"Live Video\" guide page." msgstr "" msgid "ConnectPrinter(LAN)" msgstr "" msgid "Please input the printer access code:" msgstr "" msgid "" "You can find it in \"Settings > Network > Access code\"\n" "on the printer, as shown in the figure:" msgstr "" msgid "" "You can find it in \"Setting > Setting > LAN only > Access Code\"\n" "on the printer, as shown in the figure:" msgstr "" msgid "Invalid input." msgstr "" msgid "New Window" msgstr "" msgid "Open a new window" msgstr "" msgid "Application is closing" msgstr "" msgid "Closing Application while some presets are modified." msgstr "" msgid "Logging" msgstr "" msgid "Prepare" msgstr "" msgid "Preview" msgstr "" msgid "The current page has unsaved changes. You can continue editing or choose to save/discard before leaving." msgstr "" msgid "Device" msgstr "" msgid "Multi-device" msgstr "" msgid "Project" msgstr "" msgid "Yes" msgstr "" msgid "No" msgstr "" msgid "will be closed before creating a new model. Do you want to continue?" msgstr "" msgid "Slice plate" msgstr "" msgid "Print plate" msgstr "" msgid "" "This is your first time slicing with the dual extruder machine.\n" "Would you like to watch a quick tutorial video?" msgstr "" msgid "First Guide" msgstr "" msgid "" "This is your first time printing tpu filaments with the dual extruder machine.\n" "Would you like to watch a quick tutorial video?" msgstr "" msgid "PPS-CF/PPA-CF is brittle and could break in bended PTFE tube above Toolhead. Please refer to Wiki before use. " msgstr "" msgid "Tips" msgstr "" msgid "Slice all" msgstr "" msgid "Export G-code file" msgstr "" msgid "Send" msgstr "" msgid "Export plate sliced file" msgstr "" msgid "Export all sliced file" msgstr "" msgid "Print all" msgstr "" msgid "Send all" msgstr "" msgid "Send to QIDI Farm Manager Client" msgstr "" msgid "Send to BFMC" msgstr "" msgid "Send to Multi-device" msgstr "" msgid "Keyboard Shortcuts" msgstr "" msgid "Show the list of the keyboard shortcuts" msgstr "" msgid "Setup Wizard" msgstr "" msgid "Show Configuration Folder" msgstr "" msgid "Show Tip of the Day" msgstr "" msgid "Report issue" msgstr "" msgid "Check for Update" msgstr "" msgid "Check for Presets Update" msgstr "" msgid "Open Network Test" msgstr "" #, possible-c-format, possible-boost-format msgid "&About %s" msgstr "" msgid "Upload Models" msgstr "" msgid "Download Models" msgstr "" msgid "Default View" msgstr "" msgid "Top View" msgstr "" #. TRN To be shown in the main menu View->Bottom msgid "Bottom" msgstr "" msgid "Bottom View" msgstr "" msgid "Front" msgstr "" msgid "Front View" msgstr "" msgid "Rear" msgstr "" msgid "Rear View" msgstr "" msgid "Left View" msgstr "" msgid "Right View" msgstr "" msgctxt "Camera" msgid "Isometric" msgstr "" msgid "Isometric View" msgstr "" msgid "Start a new window" msgstr "" msgid "New Project" msgstr "" msgid "Start a new project" msgstr "" msgid "Open a project file" msgstr "" msgid "Recent projects" msgstr "" msgid "Save Project" msgstr "" msgid "Save current project to file" msgstr "" msgid "Save Project as" msgstr "" msgid "Shift+" msgstr "" msgid "Save current project as" msgstr "" msgid "Import 3MF/STL/STEP/SVG/OBJ/AMF" msgstr "" msgid "Load a model" msgstr "" msgid "Import Configs" msgstr "" msgid "Load configs" msgstr "" msgid "Import" msgstr "" msgid "Export all objects as one STL" msgstr "" msgid "Export all objects as STLs" msgstr "" msgid "Export Generic 3MF" msgstr "" msgid "Export 3mf file without using some 3mf-extensions" msgstr "" msgid "Export current sliced file" msgstr "" msgid "Export all plate sliced file" msgstr "" msgid "Export G-code" msgstr "" msgid "Export current plate as G-code" msgstr "" msgid "Export toolpaths as OBJ" msgstr "" msgid "Export Preset Bundle" msgstr "" msgid "Export current configuration to files" msgstr "" msgid "Export" msgstr "" msgid "Publish to MakerWorld" msgstr "" msgid "Batch Preset Management" msgstr "" msgid "Quit" msgstr "" msgid "Undo" msgstr "" msgid "Redo" msgstr "" msgid "Cut selection to clipboard" msgstr "" msgid "Copy" msgstr "" msgid "Copy selection to clipboard" msgstr "" msgid "Paste" msgstr "" msgid "Paste clipboard" msgstr "" msgid "Delete selected" msgstr "" msgid "Deletes the current selection" msgstr "" msgid "Delete all" msgstr "" msgid "Deletes all objects" msgstr "" msgid "Clone selected" msgstr "" msgid "Clone copies of selections" msgstr "" msgid "Select all" msgstr "" msgid "Selects all objects" msgstr "" msgid "Deselect all" msgstr "" msgid "Deselects all objects" msgstr "" msgid "Use Perspective View" msgstr "" msgid "Use Orthogonal View" msgstr "" msgid "Show 3D Navigator" msgstr "" msgid "Show 3D navigator in Prepare and Preview scene" msgstr "" msgid "Reset Window Layout" msgstr "" msgid "Reset to default window layout" msgstr "" msgid "Show object labels in 3D scene" msgstr "" msgid "Show &Overhang" msgstr "" msgid "Show object overhang highlight in 3D scene" msgstr "" msgid "Set 3DConnexion" msgstr "" msgid "Set 3DConnexion mouse" msgstr "" msgid "Services" msgstr "" msgid "Hide QIDIStudio" msgstr "" msgid "Hide Others" msgstr "" msgid "Show All" msgstr "" msgid "Quit QIDIStudio" msgstr "" msgid "Preferences" msgstr "" msgid "View" msgstr "" msgid "Help" msgstr "" msgid "Temperature Calibration" msgstr "" msgid "Pass 1" msgstr "" msgid "Flow rate test - Pass 1" msgstr "" msgid "Pass 2" msgstr "" msgid "Flow rate test - Pass 2" msgstr "" msgid "Flow rate" msgstr "" msgid "Pressure advance" msgstr "" msgid "Retraction test" msgstr "" msgid "Max flowrate" msgstr "" msgid "VFA" msgstr "" msgid "More..." msgstr "" msgid "Tutorial" msgstr "" msgid "Calibration help" msgstr "" msgid "More calibrations" msgstr "" msgid "Window" msgstr "" msgid "Minimize" msgstr "" msgid "Zoom" msgstr "" msgid "Tile Window to Left of Screen" msgstr "" msgid "Tile Window to Right of Screen" msgstr "" msgid "Replace Tiled Window" msgstr "" msgid "Remove Window from Set" msgstr "" msgid "Bring All to Front" msgstr "" msgid "&Open G-code" msgstr "" msgid "Open a G-code file" msgstr "" msgid "Re&load from Disk" msgstr "" msgid "Reload the plater from disk" msgstr "" msgid "Export &Toolpaths as OBJ" msgstr "" msgid "Open &Studio" msgstr "" msgid "Open Studio" msgstr "" msgid "&Quit" msgstr "" #, possible-c-format, possible-boost-format msgid "Quit %s" msgstr "" msgid "&File" msgstr "" msgid "&View" msgstr "" msgid "&Help" msgstr "" #, possible-c-format, possible-boost-format msgid "A file exists with the same name: %s, do you want to override it." msgstr "" #, possible-c-format, possible-boost-format msgid "A config exists with the same name: %s, do you want to override it." msgstr "" msgid "Overwrite file" msgstr "" msgid "Yes to All" msgstr "" msgid "No to All" msgstr "" msgid "Choose a directory" msgstr "" #, possible-c-format, possible-boost-format msgid "There is %d config exported. (Only non-system configs)" msgid_plural "There are %d configs exported. (Only non-system configs)" msgstr[0] "" msgstr[1] "" msgid "Export result" msgstr "" msgid "Select profile to load:" msgstr "" #, possible-c-format, possible-boost-format msgid "There is %d config imported. (Only non-system and compatible configs)" msgid_plural "There are %d configs imported. (Only non-system and compatible configs)" msgstr[0] "" msgstr[1] "" msgid "Import result" msgstr "" msgid "File is missing" msgstr "" msgid "The project is no longer available." msgstr "" msgid "Filament Settings" msgstr "" msgid "" "Do you want to synchronize your personal data from QIDI Cloud? \n" "It contains the following information:\n" "1. The Process presets\n" "2. The Filament presets\n" "3. The Printer presets" msgstr "" msgid "Synchronization" msgstr "" msgid "The device cannot handle more conversations. Please retry later." msgstr "" msgid "Player is malfunctioning. Please reinstall the system player." msgstr "" msgid "The player is not loaded, please click \"play\" button to retry." msgstr "" msgid "Plugin library failed to load. Click here to view the solution." msgstr "" msgid "Temporarily closed because there is no operation for a while." msgstr "" msgid "Temporarily closed because there is no printing for a while." msgstr "" msgid "Please confirm if the printer is connected." msgstr "" msgid "The printer is currently busy downloading. Please try again after it finishes." msgstr "" msgid "Printer camera is malfunctioning." msgstr "" msgid "Problem occured. Please update the printer firmware and try again." msgstr "" msgid "LAN Only Liveview is off. Please turn on the liveview on printer screen." msgstr "" msgid "Please enter the IP of printer to connect." msgstr "" msgid "Initializing..." msgstr "" msgid "Connection Failed. Please check the network and try again" msgstr "" msgid "Please check the network and try again, You can restart or update the printer if the issue persists." msgstr "" msgid "Multi-device/client simultaneous liveview is not supported. Please close the liveview on other devices/clients and try again." msgstr "" msgid "Video Stopped." msgstr "" msgid "LAN Connection Failed (Failed to start liveview)" msgstr "" msgid "" "Virtual Camera Tools is required for this task!\n" "Do you want to install them?" msgstr "" msgid "Downloading Virtual Camera Tools" msgstr "" msgid "" "Another virtual camera is running.\n" "QIDI Studio supports only a single virtual camera.\n" "Do you want to stop this virtual camera?" msgstr "" #, possible-c-format, possible-boost-format msgid "Virtual camera initialize failed (%s)!" msgstr "" msgid "Network unreachable" msgstr "" msgid "Information" msgstr "" msgid "The live streaming feature relies on QIDI Studio to run,and the stream will end some time after the app is closed." msgstr "" msgid "Playing..." msgstr "" msgid "DLL load error" msgstr "" msgid "Loading..." msgstr "" msgid "Year" msgstr "" msgid "Month" msgstr "" msgid "All Files" msgstr "" msgid "Group files by year, recent first." msgstr "" msgid "Group files by month, recent first." msgstr "" msgid "Show all files, recent first." msgstr "" msgid "Timelapse" msgstr "" msgid "Switch to timelapse files." msgstr "" msgid "Video" msgstr "" msgid "Switch to video files." msgstr "" msgid "Switch to 3mf model files." msgstr "" msgid "Delete selected files from printer." msgstr "" msgid "Download" msgstr "" msgid "Download selected files from printer." msgstr "" msgid "Select" msgstr "" msgid "Batch manage files." msgstr "" msgid "Refresh" msgstr "" msgid "Reload file list from printer." msgstr "" msgid "No printers." msgstr "" msgid "Loading file list..." msgstr "" msgid "No files" msgstr "" msgid "Load failed" msgstr "" msgid "Browsing file in storage is not supported in current firmware. Please update the printer firmware." msgstr "" msgid "LAN Connection Failed (Failed to view sdcard)" msgstr "" msgid "Browsing file in storage is not supported in LAN Only Mode." msgstr "" #, possible-c-format, possible-boost-format msgid "You are going to delete %u file from printer. Are you sure to continue?" msgid_plural "You are going to delete %u files from printer. Are you sure to continue?" msgstr[0] "" msgstr[1] "" msgid "Delete files" msgstr "" #, possible-c-format, possible-boost-format msgid "Do you want to delete the file '%s' from printer?" msgstr "" msgid "Delete file" msgstr "" msgid "Fetching model infomations ..." msgstr "" msgid "Failed to fetch model information from printer." msgstr "" msgid "Failed to parse model information." msgstr "" msgid "The .gcode.3mf file contains no G-code data.Please slice it whth QIDI Studio and export a new .gcode.3mf file." msgstr "" #, possible-c-format, possible-boost-format msgid "File '%s' was lost! Please download it again." msgstr "" #, possible-c-format, possible-boost-format msgid "" "File: %s\n" "Title: %s\n" msgstr "" msgid "Download waiting..." msgstr "" msgid "Play" msgstr "" msgid "Open Folder" msgstr "" msgid "Download finished" msgstr "" #, possible-c-format, possible-boost-format msgid "Downloading %d%%..." msgstr "" msgid "Air Condition" msgstr "" msgid "Reconnecting the printer, the operation cannot be completed immediately, please try again later." msgstr "" msgid "Timeout, please try again." msgstr "" msgid "File does not exist." msgstr "" msgid "File checksum error. Please retry." msgstr "" msgid "Not supported on the current printer version." msgstr "" msgid "" "Please check if the storage is inserted into the printer.\n" "If it still cannot be read, you can try formatting the storage." msgstr "" msgid "The firmware version of the printer is too low. Please update the firmware and try again." msgstr "" msgid "The file already exists, do you want to replace it?" msgstr "" msgid "Insufficient storage space, please clear the space and try again." msgstr "" msgid "File creation failed, please try again." msgstr "" msgid "File write failed, please try again." msgstr "" msgid "MD5 verification failed, please try again." msgstr "" msgid "File renaming failed, please try again." msgstr "" msgid "File upload failed, please try again." msgstr "" #, possible-c-format, possible-boost-format msgid "Error code: %d" msgstr "" msgid "User cancels task." msgstr "" msgid "Failed to read file, please try again." msgstr "" msgid "Speed:" msgstr "" msgid "Deadzone:" msgstr "" msgid "Options:" msgstr "" msgid "Translation/Zoom" msgstr "" msgid "3Dconnexion settings" msgstr "" msgid "Swap Y/Z axes" msgstr "" msgid "(LAN)" msgstr "" msgid "Search" msgstr "" msgid "My Device" msgstr "" msgid "Other Device" msgstr "" msgid "Online" msgstr "" msgid "Input access code" msgstr "" msgid "Can't find my devices?" msgstr "" msgid "Log out successful." msgstr "" msgid "Offline" msgstr "" msgid "Busy" msgstr "" msgid "Modifying the device name" msgstr "" msgid "Name is invalid;" msgstr "" msgid "illegal characters:" msgstr "" msgid "illegal suffix:" msgstr "" msgid "The name is not allowed to be empty." msgstr "" msgid "The name is not allowed to start with space character." msgstr "" msgid "The name is not allowed to end with space character." msgstr "" msgid "The name is not allowed to exceeds 32 characters." msgstr "" msgid "Bind with Pin Code" msgstr "" msgid "Bind with Access Code" msgstr "" msgid "" "Please log in before binding your device with a PIN code.\n" "Alternatively, you can use LAN mode to bind your device. Learn about LAN mode." msgstr "" msgid "Go to Login" msgstr "" msgctxt "Quit_Switching" msgid "Quit" msgstr "" msgid "Switching..." msgstr "" msgid "Switching failed" msgstr "" msgid "Printing Progress" msgstr "" msgid "Parts Skip" msgstr "" msgid "Stop" msgstr "" msgid "Layer: N/A" msgstr "" msgid "Click to view thermal preconditioning explanation" msgstr "" msgid "Estimated finish time: " msgstr "" msgid "" "The estimated printing time for \n" "multi-color models may be inaccurate." msgstr "" msgid "Clear" msgstr "" msgid "" "You have completed printing the mall model, \n" "but the synchronization of rating information has failed." msgstr "" msgid "How do you like this printing file?" msgstr "" msgid "(The model has already been rated. Your rating will overwrite the previous rating.)" msgstr "" msgid "Rate" msgstr "" msgid "Finished" msgstr "" msgid "Camera" msgstr "" msgid "Storage" msgstr "" msgid "Camera Setting" msgstr "" msgid "Control" msgstr "" msgid "Printer Parts" msgstr "" msgid "Print Options" msgstr "" msgid "Safety Options" msgstr "" msgid "Hotends" msgstr "" msgid "100%" msgstr "" msgid "Lamp" msgstr "" msgid "Bed" msgstr "" msgid "Filament loading..." msgstr "" msgid "No Storage" msgstr "" msgid "Storage Abnormal" msgstr "" msgid "Cancel print" msgstr "" msgid "Are you sure you want to stop this print?" msgstr "" msgid "The printer is busy on other print job" msgstr "" msgid "When printing is paused, filament loading and unloading are only supported for external slots." msgstr "" msgid "Current extruder is busy changing filament" msgstr "" msgid "Current slot has alread been loaded" msgstr "" msgid "The selected slot is empty." msgstr "" msgid "Printer 2D mode does not support 3D calibration" msgstr "" msgid "Downloading..." msgstr "" msgid "Cloud Slicing..." msgstr "" #, possible-c-format, possible-boost-format msgid "In Cloud Slicing Queue, there are %s tasks ahead." msgstr "" #, possible-c-format, possible-boost-format msgid "Layer: %s" msgstr "" #, possible-c-format, possible-boost-format msgid "Layer: %d/%d" msgstr "" #, possible-c-format, possible-boost-format msgid "(%d)" msgstr "" msgid "Auto homing" msgstr "" msgid "Are you sure you want to trigger auto homing?" msgstr "" msgid "Homing" msgstr "" msgid "Please heat the nozzle to above 170 degree before loading or unloading filament." msgstr "" msgid "Right extruder hotend not detected. Cannot set nozzle temperature." msgstr "" msgid "Chamber temperature cannot be changed in cooling mode while printing." msgstr "" msgid "If the chamber temperature exceeds 40℃, the system will automatically switch to heating mode. Please confirm whether to switch." msgstr "" msgid "Please select an AMS slot before calibration" msgstr "" msgid "Cannot read filament info: the filament is loaded to the tool head,please unload the filament and try again." msgstr "" msgid "This only takes effect during printing" msgstr "" msgid "Silent" msgstr "" msgid "Sport" msgstr "" msgid "Ludicrous" msgstr "" msgid "Turning off the lights during the task will cause the failure of AI monitoring, like spaghetti detection. Please choose carefully." msgstr "" msgid "Keep it On" msgstr "" msgid "Still turn it Off" msgstr "" msgid "Can't start this without storage." msgstr "" msgid "Rate the Print Profile" msgstr "" msgid "Comment" msgstr "" msgid "Rate this print" msgstr "" msgid "Add Photo" msgstr "" msgid "Delete Photo" msgstr "" msgid "Submit" msgstr "" msgid "Please click on the star first." msgstr "" msgid "InFo" msgstr "" msgid "Get oss config failed." msgstr "" msgid "Upload Pictures" msgstr "" msgid "Number of images successfully uploaded" msgstr "" msgid " upload failed" msgstr "" msgid " upload config parse failed\n" msgstr "" msgid " No corresponding storage bucket\n" msgstr "" msgid " can not be opened\n" msgstr "" msgid "" "The following issues occurred during the process of uploading images. Do you want to ignore them?\n" "\n" msgstr "" msgid "info" msgstr "" msgid "Synchronizing the printing results. Please retry a few seconds later." msgstr "" msgid "Upload failed\n" msgstr "" msgid "obtaining instance_id failed\n" msgstr "" msgid "" "Your comment result cannot be uploaded due to some reasons. As follows:\n" "\n" " error code: " msgstr "" msgid "error message: " msgstr "" msgid "" "\n" "\n" "Would you like to redirect to the webpage for rating?" msgstr "" msgid "Some of your images failed to upload. Would you like to redirect to the webpage for rating?" msgstr "" msgid "You can select up to 16 images." msgstr "" msgid "" "At least one successful print record of this print profile is required \n" "to give a positive rating(4 or 5stars)." msgstr "" msgid "Step file import parameters" msgstr "" msgid "Smaller linear and angular deflections result in higher-quality transformations but increase the processing time." msgstr "" msgid "View Wiki for more information" msgstr "" msgid "Linear Deflection" msgstr "" msgid "Please input a valid value (0.001 < linear deflection < 0.1)" msgstr "" msgid "Angle Deflection" msgstr "" msgid "Please input a valid value (0.01 < angle deflection < 1.0)" msgstr "" msgid "Split compound and compsolid into multiple objects" msgstr "" msgid "Number of triangular facets" msgstr "" msgid "0" msgstr "" msgid "Don't show again" msgstr "" msgid "Calculating, please wait..." msgstr "" msgid "Status" msgstr "" msgctxt "Firmware" msgid "Update" msgstr "" msgid "Assistant(HMS)" msgstr "" msgid "Go to" msgstr "" msgid "Later" msgstr "" #, possible-c-format, possible-boost-format msgid "%s error" msgstr "" #, possible-c-format, possible-boost-format msgid "%s has encountered an error" msgstr "" #, possible-c-format, possible-boost-format msgid "%s warning" msgstr "" #, possible-c-format, possible-boost-format msgid "%s has a warning" msgstr "" #, possible-c-format, possible-boost-format msgid "%s info" msgstr "" #, possible-c-format, possible-boost-format msgid "%s information" msgstr "" msgid "Skip" msgstr "" msgid "Newer 3mf version" msgstr "" msgid "The 3mf file version is in Beta and it is newer than the current QIDI Studio version." msgstr "" msgid "If you would like to try QIDI Studio Beta, you may click to" msgstr "" msgid "Download Beta Version" msgstr "" msgid "The 3mf file version is newer than the current QIDI Studio version." msgstr "" msgid "Update your QIDI Studio could enable all functionality in the 3mf file." msgstr "" msgid "Current Version: " msgstr "" msgid "Latest Version: " msgstr "" msgctxt "Software" msgid "Update" msgstr "" msgid "Not for now" msgstr "" msgid "Server Exception" msgstr "" msgid "The server is unable to respond. Please click the link below to check the server status." msgstr "" msgid "If the server is in a fault state, you can temporarily use offline printing or local network printing." msgstr "" msgid "How to use LAN only mode" msgstr "" msgid "Don't show this dialog again" msgstr "" msgid "3D Mouse disconnected." msgstr "" msgid "Configuration can update now." msgstr "" msgid "Detail." msgstr "" msgid "Integration was successful." msgstr "" msgid "Integration failed." msgstr "" msgid "Undo integration was successful." msgstr "" msgid "New network plug-in available." msgstr "" msgid "Details" msgstr "" msgid "New printer config available." msgstr "" msgid "Wiki" msgstr "" msgid "Undo integration failed." msgstr "" msgid "Exporting." msgstr "" msgid "Software has New version." msgstr "" msgid "Goto download page." msgstr "" msgid "More" msgstr "" msgid "Open Folder." msgstr "" msgid "Safely remove hardware." msgstr "" #, possible-c-format, possible-boost-format msgid "%1$d Object has custom support." msgid_plural "%1$d Objects have custom support." msgstr[0] "" msgstr[1] "" #, possible-c-format, possible-boost-format msgid "%1$d Object has color painting." msgid_plural "%1$d Objects have color painting." msgstr[0] "" msgstr[1] "" #, possible-c-format, possible-boost-format msgid "%1$d Object has fuzzy skin." msgid_plural "%1$d Objects have fuzzy skin." msgstr[0] "" msgstr[1] "" #, possible-c-format, possible-boost-format msgid "%1$d object was loaded as a part of cut object." msgid_plural "%1$d objects were loaded as parts of cut object" msgstr[0] "" msgstr[1] "" msgid "ERROR" msgstr "" msgid "CANCELED" msgstr "" msgid "COMPLETED" msgstr "" msgid "Cancel upload" msgstr "" msgid "Jump to" msgstr "" msgid "Error:" msgstr "" msgid "Warning:" msgstr "" msgid "Export successfully." msgstr "" msgid "Model file downloaded." msgstr "" msgid "Serious warning:" msgstr "" msgid " Click here to install it." msgstr "" msgid "WARNING:" msgstr "" msgid "Your model needs support ! Please make support material enable." msgstr "" msgid "Gcode path overlap" msgstr "" msgid "Support painting" msgstr "" msgid "Fuzzy skin" msgstr "" msgid "Color painting" msgstr "" msgid "Cut connectors" msgstr "" msgid "Layers" msgstr "" msgid "Range" msgstr "" msgid "The application cannot run normally because OpenGL version is lower than 2.0.\n" msgstr "" msgid "Please upgrade your graphics card driver." msgstr "" msgid "Unsupported OpenGL version" msgstr "" #, possible-c-format, possible-boost-format msgid "" "Unable to load shaders:\n" "%s" msgstr "" msgid "Error loading shaders" msgstr "" msgctxt "Layers" msgid "Top" msgstr "" msgctxt "Layers" msgid "Bottom" msgstr "" msgid "Enable detection of build plate position" msgstr "" msgid "The localization tag of build plate is detected, and printing is paused if the tag is not in predefined range." msgstr "" msgid "Build Plate Detection" msgstr "" msgid "Identifies the type and position of the build plate on the heatbed. Pausing printing if a mismatch is detected." msgstr "" msgid "AI Detections" msgstr "" msgid "Printer will send assistant message or pause printing if any of the following problem is detected." msgstr "" msgid "Enable AI monitoring of printing" msgstr "" msgid "Pausing Sensitivity:" msgstr "" msgid "Spaghetti Detection" msgstr "" msgid "Detects spaghetti failure(scattered lose filament)." msgstr "" msgid "Purge Chute Pile-Up Detection" msgstr "" msgid "Monitors if the waste is piled up in the purge chute." msgstr "" msgid "Nozzle Clumping Detection" msgstr "" msgid "Checks if the nozzle is clumping by filaments or other foreign objects." msgstr "" msgid "Detects air printing caused by nozzle clogging or filament grinding." msgstr "" msgid "Ensures the build plate type and placement are correct." msgstr "" msgid "Type Detection" msgstr "" msgid "Pauses printing when the detected build plate type does not match the selected one." msgstr "" msgid "Alignment Detection" msgstr "" msgid "Pauses printing when build plate misalignment is detected." msgstr "" msgid "First Layer Inspection" msgstr "" msgid "Auto-recovery from step loss" msgstr "" msgid "Store Sent Files on External Storage" msgstr "" msgid "Save the printing files initiated from QIDI Studio, QIDI Handy and MakerWorld on External Storage" msgstr "" msgid "Allow Prompt Sound" msgstr "" msgid "Filament Tangle Detect" msgstr "" msgid "Checks if the nozzle is clumping by filament or other foreign objects." msgstr "" msgid "Open Door Detection" msgstr "" msgid "Notification" msgstr "" msgid "Pause printing" msgstr "" msgctxt "Nozzle Type" msgid "Type" msgstr "" msgctxt "Nozzle Diameter" msgid "Diameter" msgstr "" msgctxt "Nozzle Flow" msgid "Flow" msgstr "" msgid "Please change the nozzle settings on the printer." msgstr "" msgid "View wiki" msgstr "" msgid "Brass" msgstr "" msgid "High flow" msgstr "" msgid "No wiki link available for this printer." msgstr "" msgid "Refreshing" msgstr "" msgid "Unavailable while heating maintenance function is on." msgstr "" msgid "Idle Heating Protection" msgstr "" msgid "Stops heating automatically after 5 mins of idle to ensure safety." msgstr "" msgid "Global" msgstr "" msgid "Objects" msgstr "" msgid "Advance" msgstr "" msgid "Compare presets" msgstr "" msgid "View all object's settings" msgstr "" msgid "Filament settings" msgstr "" msgid "Printer settings" msgstr "" msgid "Remove current plate (if not last one)" msgstr "" msgid "Auto orient objects on current plate" msgstr "" msgid "Arrange objects on current plate" msgstr "" msgid "Unlock current plate" msgstr "" msgid "Edit filament grouping" msgstr "" msgid "Edit current plate name" msgstr "" msgid "Customize current plate" msgstr "" #, possible-c-format, possible-boost-format msgid "The %s nozzle can not print %s." msgstr "" #, possible-boost-format msgid "Mixing %1% with %2% in printing is not recommended.\n" msgstr "" msgid " nozzle" msgstr "" #, possible-boost-format msgid "It is not recommended to print the following filament(s) with %1%: %2%\n" msgstr "" msgid "It is not recommended to use the following nozzle and filament combinations:\n" msgstr "" #, possible-boost-format msgid "%1% with %2%\n" msgstr "" #, possible-boost-format msgid " plate %1%: " msgstr "" msgid "Invalid name, the following characters are not allowed:" msgstr "" msgid "(Including its escape characters)" msgstr "" msgid "Sliced Info" msgstr "" msgid "Used Filament (m)" msgstr "" msgid "Used Filament (mm³)" msgstr "" msgid "Used Filament (g)" msgstr "" msgid "Used Materials" msgstr "" msgid "Estimated time" msgstr "" msgid "Filament changes" msgstr "" msgid "Set the number of AMS installed on the nozzle." msgstr "" msgid "AMS(4 slots)" msgstr "" msgid "AMS(1 slot)" msgstr "" msgid "Not installed" msgstr "" msgid "" "The software does not support using different diameter of nozzles for one print.\n" "If the left and right nozzles are inconsistent, we can only proceed with single-head printing.\n" "Please confirm which nozzle you would like to use for this project." msgstr "" msgid "Switch diameter" msgstr "" #, possible-c-format, possible-boost-format msgid "Left nozzle: %smm" msgstr "" #, possible-c-format, possible-boost-format msgid "Right nozzle: %smm" msgstr "" msgid "Sync printer information" msgstr "" msgid "" "The currently selected machine preset is inconsistent with the connected printer type.\n" "Are you sure to continue syncing?" msgstr "" msgid "There are unset nozzle types. Please set the nozzle types of all extruders before synchronizing." msgstr "" msgid "Sync extruder infomation" msgstr "" msgid "Click to edit preset" msgstr "" msgid "Connection" msgstr "" msgid "Click to view the wiki of the current plate type" msgstr "" msgid "Sync info" msgstr "" msgid "Synchronize nozzle information and the number of AMS" msgstr "" msgid "Project Filaments" msgstr "" msgid "Purge mode" msgstr "" msgid "Flushing volumes" msgstr "" msgid "Add one filament" msgstr "" msgid "Remove last filament" msgstr "" msgid "Synchronize filament list from AMS" msgstr "" msgid "Set filaments to use" msgstr "" msgid "Search plate, object and part." msgstr "" #, possible-c-format, possible-boost-format msgid "After completing your operation, %s project will be closed and create a new project." msgstr "" msgid "There are no compatible filaments, and sync is not performed." msgstr "" msgid "Sync filaments with AMS" msgstr "" msgid "" "There are some unknown or uncompatible filaments mapped to generic preset.\n" "Please update QIDI Studio or restart QIDI Studio to check if there is an update to system presets." msgstr "" msgid "Filament type and color information have been synchronized, but slot information is not included." msgstr "" #, possible-boost-format msgid "Do you want to save changes to \"%1%\"?" msgstr "" #, possible-c-format, possible-boost-format msgid "Successfully unmounted. The device %s(%s) can now be safely removed from the computer." msgstr "" #, possible-c-format, possible-boost-format msgid "Ejecting of device %s(%s) has failed." msgstr "" msgid "" "It seems that you have projects that were not closed properly. Would you like to restore your last unsaved project?\n" "If you have a currently opened project and click \"Restore\", the current project will be closed." msgstr "" msgid "Restore" msgstr "" msgid "The current hot bed temperature is relatively high. The nozzle may be clogged when printing this filament in a closed enclosure. Please open the front door and/or remove the upper glass." msgstr "" msgid "The nozzle hardness required by the filament is higher than the default nozzle hardness of the printer. Please replace the hardened nozzle or filament, otherwise, the nozzle will be attrited or damaged." msgstr "" msgid "Enabling traditional timelapse photography may cause surface imperfections. It is recommended to change to smooth mode." msgstr "" msgid "\n" msgstr "" msgid "(Path to modify: 'Process'-'Others'-'Special Mode'-'Timelapsed')" msgstr "" msgid "Smooth mode for timelapse is enabled, but the prime tower is off, which may cause print defects. Please enable the prime tower, re-slice and print again." msgstr "" msgid "Expand sidebar" msgstr "" msgid "Collapse sidebar" msgstr "" #, possible-c-format, possible-boost-format msgid "Loading file: %s" msgstr "" msgid "The 3mf is not from QIDI Tech, load geometry data only." msgstr "" msgid "Load 3mf" msgstr "" msgid "The Config can not be loaded." msgstr "" msgid "Due to the lower version of QIDI Studio, this 3mf file cannot be fully loaded. Please update QIDI Studio to the latest version" msgstr "" msgid "Found following keys unrecognized:\n" msgstr "" msgid "The 3mf is generated by old QIDI Studio, load geometry data only." msgstr "" msgid "Invalid values found in the 3mf:" msgstr "" msgid "Please correct them in the param tabs" msgstr "" msgid "The 3mf has following modified G-codes in filament or printer presets:" msgstr "" msgid "Please confirm that these modified G-codes are safe to prevent any damage to the machine!" msgstr "" msgid "Modified G-codes" msgstr "" msgid "The 3mf has following customized filament or printer presets:" msgstr "" msgid "Please confirm that the G-codes within these presets are safe to prevent any damage to the machine!" msgstr "" msgid "Customized Preset" msgstr "" msgid "Name of components inside step file is not UTF8 format!" msgstr "" msgid "The name may show garbage characters!" msgstr "" #, possible-boost-format msgid "Failed loading file \"%1%\". An invalid configuration was found." msgstr "" msgid "Objects with zero volume removed" msgstr "" msgid "The volume of the object is zero" msgstr "" #, possible-c-format, possible-boost-format msgid "" "The object from file %s is too small, and maybe in meters or inches.\n" " Do you want to scale to millimeters?" msgstr "" msgid "Object too small" msgstr "" msgid "" "This file contains several objects positioned at multiple heights.\n" "Instead of considering them as multiple objects, should \n" "the file be loaded as a single object having multiple parts?" msgstr "" msgid "Multi-part object detected" msgstr "" msgid "Load these files as a single object with multiple parts?\n" msgstr "" msgid "Object with multiple parts was detected" msgstr "" msgid "The file does not contain any geometry data." msgstr "" msgid "Your object appears to be too large, Do you want to scale it down to fit the heat bed automatically?" msgstr "" msgid "Object too large" msgstr "" msgid "Export STL file:" msgstr "" msgid "Export AMF file:" msgstr "" msgid "Save file as:" msgstr "" msgid "Export OBJ file:" msgstr "" #, possible-c-format, possible-boost-format msgid "" "The file %s already exists\n" "Do you want to replace it?" msgstr "" msgid "Comfirm Save As" msgstr "" msgid "Delete object which is a part of cut object" msgstr "" msgid "" "You try to delete an object which is a part of a cut object.\n" "This action will break a cut correspondence.\n" "After that model consistency can't be guaranteed." msgstr "" msgid "The selected object couldn't be split." msgstr "" msgid "Another export job is running." msgstr "" msgid "Unable to replace with more than one volume" msgstr "" msgid "Error during replace" msgstr "" msgid "Replace from:" msgstr "" msgid "Select a new file" msgstr "" msgid "File for the replace wasn't selected" msgstr "" msgid "Please select a file" msgstr "" msgid "Do you want to replace it" msgstr "" msgid "Message" msgstr "" msgid "Reload from:" msgstr "" msgid "Unable to reload:" msgstr "" msgid "Error during reload" msgstr "" msgid "Slicing" msgstr "" msgid "There are warnings after slicing models:" msgstr "" msgid "warnings" msgstr "" msgid "Invalid data" msgstr "" msgid "Slicing Canceled" msgstr "" #, possible-c-format, possible-boost-format msgid "Slicing Plate %d" msgstr "" msgid "A Helio simulation or optimization task is in progress." msgstr "" msgid "Invalid printer preset. Unable to slice with Helio." msgstr "" msgid "The current printer preset cannot be sliced using Helio." msgstr "" msgid "Helio does not support using a number of materials greater than 1." msgstr "" #, possible-c-format, possible-boost-format msgid "Helio does not support materials %s" msgstr "" msgid "Helio functions do not support the print sequence of \"ByObject\"." msgstr "" msgid "" "No valid Helio-PAT detected. Helio simulation & optimization cannot proceed. \n" "Please request a new Helio-PAT." msgstr "" msgid "Execution Blocked" msgstr "" msgid "Regenerate PAT" msgstr "" msgid "Failed to obtain Helio PAT, Click Refresh to obtain it again." msgstr "" msgid "Successfully obtained PAT." msgstr "" msgid "The printer list and material list are being synchronized. Please try again later." msgstr "" msgid "Synchronizing Helio" msgstr "" msgid "Please resolve the slicing errors and publish again." msgstr "" msgid "Failed to start QIDI Farm Manager Client." msgstr "" msgid "No QIDI Farm Manager Client found." msgstr "" msgid "Network Plug-in is not detected. Network related features are unavailable." msgstr "" msgid "" "Preview only mode:\n" "The loaded file contains gcode only, Can not enter the Prepare page" msgstr "" msgid "" "The nozzle type and AMS quantity information has not been synced from the connected printer.\n" "After syncing, software can optimize printing time and filament usage when slicing.\n" "Would you like to sync now ?" msgstr "" msgid "Sync now" msgstr "" msgid "You can keep the modified presets to the new project or discard them" msgstr "" msgid "Creating a new project" msgstr "" #, possible-c-format, possible-boost-format msgid "" "The currently connected printer '%s', is a %s model.\n" "To use this printer for printing, please switch the printer model of project file to %s." msgstr "" #, possible-c-format, possible-boost-format msgid "" "The currently connected printer '%s', is a %s model but not consistent with preset in project file.\n" "To use this printer for printing, please switch the preset first." msgstr "" msgid "Switch now" msgstr "" msgid "Load project" msgstr "" msgid "" "Failed to save the project.\n" "Please check whether the folder exists online or if other programs open the project file or if there is enough disk space." msgstr "" msgid "Save project" msgstr "" msgid "Importing Model" msgstr "" msgid "prepare 3mf file..." msgstr "" msgid "Download failed, unknown file format." msgstr "" msgid "downloading project ..." msgstr "" msgid "Download failed, File size exception." msgstr "" #, possible-c-format, possible-boost-format msgid "Project downloaded %d%%" msgstr "" msgid "Importing to QIDI Studio failed. Please download the file and manually import it." msgstr "" msgid "The current settings produce a model that is too large. Please narrow the range or increase the step size. (Model size is proportional to (End - Start) / Step size.)" msgstr "" msgid "The selected file" msgstr "" msgid "does not contain valid gcode." msgstr "" msgid "Error occurs while loading G-code file" msgstr "" msgid "Drop project file" msgstr "" msgid "Please select an action" msgstr "" msgid "Open as project" msgstr "" msgid "Import geometry only" msgstr "" msgid "Please import multiple files with the same suffix." msgstr "" msgid "Only one G-code file can be opened at the same time." msgstr "" msgid "G-code loading" msgstr "" msgid "G-code files can not be loaded with models together!" msgstr "" msgid "Can not add models when in preview mode!" msgstr "" msgid "Add Models" msgstr "" msgid "All objects will be removed, continue?" msgstr "" msgid "The current project has unsaved changes, save it before continue?" msgstr "" msgid "Remember my choice." msgstr "" msgid "Number of copies:" msgstr "" msgid "Copies of the selected object" msgstr "" msgid "Save G-code file as:" msgstr "" msgid "Save SLA file as:" msgstr "" msgid "The provided file name is not valid." msgstr "" msgid "The following characters are not allowed by a FAT file system:" msgstr "" msgid "Save Sliced file as:" msgstr "" #, possible-c-format, possible-boost-format msgid "The file %s has been sent to the printer's storage space and can be viewed on the printer." msgstr "" msgid "The nozzle type is not set. Please set the nozzle and try again." msgstr "" msgid "The nozzle type is not set. Please check." msgstr "" msgid "Unable to perform boolean operation on model meshes. You may fix the meshes and try again." msgstr "" #, possible-boost-format msgid "Reason: part \"%1%\" is empty." msgstr "" #, possible-boost-format msgid "Reason: part \"%1%\" does not bound a volume." msgstr "" #, possible-boost-format msgid "Reason: part \"%1%\" has self intersection." msgstr "" #, possible-boost-format msgid "Reason: \"%1%\" and another part have no intersection." msgstr "" msgid "Negative parts detected. Would you like to perform mesh boolean before exporting?" msgstr "" msgid "It is not recommended to use PVA filaments with 0.2mm nozzles." msgstr "" msgid "Are you sure to use them? \n" msgstr "" msgid "" "Print By Object: \n" "Suggest to use auto-arrange to avoid collisions when printing." msgstr "" msgid "Send G-code" msgstr "" msgid "Send to printer" msgstr "" msgid "Custom supports and color painting were removed before repairing." msgstr "" msgid "Custom supports,seam_facets and color painting were removed before repairing,model name:" msgstr "" #, possible-c-format, possible-boost-format msgid "Printer not connected. Please go to the device page to connect %s before syncing." msgstr "" #, possible-c-format, possible-boost-format msgid "The currently connected printer on the device page is not %s. Please switch to %s before syncing." msgstr "" msgid "There are no filaments on the printer. Please load the filaments on the printer first." msgstr "" msgid "The filaments on the printer are all unknown types. Please go to the printer screen or software device page to set the filament type." msgstr "" msgid "Device Page" msgstr "" msgid "Synchronize AMS Filament Information" msgstr "" msgid "Invalid number" msgstr "" msgid "Plate Settings" msgstr "" msgid "Prime Tower:" msgstr "" msgid "A cube printed during a filament change to purge old color and ensure smooth color transition." msgstr "" #, possible-boost-format msgid "Number of currently selected parts: %1%\n" msgstr "" #, possible-boost-format msgid "Number of currently selected objects: %1%\n" msgstr "" #, possible-boost-format msgid "Part name: %1%\n" msgstr "" #, possible-boost-format msgid "Object name: %1%\n" msgstr "" #, possible-boost-format msgid "Size: %1% x %2% x %3% in\n" msgstr "" #, possible-boost-format msgid "Size: %1% x %2% x %3% mm\n" msgstr "" #, possible-boost-format msgid "Volume: %1% in³\n" msgstr "" #, possible-boost-format msgid "Volume: %1% mm³\n" msgstr "" #, possible-boost-format msgid "Triangles: %1%\n" msgstr "" msgid " (Repair)" msgstr "" msgid "To repair the model, please use a third-party tool before importing it into QIDI Studio, such as " msgstr "" #, possible-c-format, possible-boost-format msgid "Plate% d: %s is not suggested to be used to print filament %s(%s). If you still want to do this printing, please set this filament's bed temperature to non zero." msgstr "" msgid "Parameter recommendation" msgstr "" msgid "In the process preset, under \"Others-Advanced\", check \"Enable clumping detection by probing\". This feature generates a small wipe tower and performs probing detection to identify clumping issues early in the print and stop printing, preventing print failures or printer damage.\n" msgstr "" msgid "Currently, the object configuration form cannot be used with a multiple-extruder printer." msgstr "" msgid "Not available" msgstr "" msgid "Top front" msgstr "" msgid "The current project has unsaved changes, save it before continuing?" msgstr "" msgid "Switching the language requires application restart.\n" msgstr "" msgid "Do you want to continue?" msgstr "" msgid "Language selection" msgstr "" msgid "Switching application language while some presets are modified." msgstr "" msgid "Changing application language" msgstr "" msgid "Changing the region will log out your account.\n" msgstr "" msgid "Region selection" msgstr "" msgid "Second" msgstr "" msgid "" "Please note that the model show will undergo certain changes at small pixels case.\n" "Enabled LOD requires application restart." msgstr "" msgid "Enable LOD" msgstr "" msgid "Bed Temperature Difference Warning" msgstr "" msgid "" "Using filaments with significantly different temperatures may cause:\n" "• Extruder clogging\n" "• Nozzle damage\n" "• Layer adhesion issues\n" "\n" "Continue with enabling this feature?" msgstr "" msgid "Browse" msgstr "" msgid "Choose Download Directory" msgstr "" msgid "General Settings" msgstr "" msgid "Asia-Pacific" msgstr "" msgid "Chinese Mainland" msgstr "" msgid "Europe" msgstr "" msgid "North America" msgstr "" msgid "Others" msgstr "" msgid "Login Region" msgstr "" msgid "Metric" msgstr "" msgid "Imperial" msgstr "" msgid "Units" msgstr "" msgid "Keep only one QIDI Studio instance" msgstr "" msgid "On OSX there is always only one instance of app running by default. However it is allowed to run multiple instances of same app from the command line. In such case this settings will allow only one instance." msgstr "" msgid "If this is enabled, when starting QIDI Studio and another instance of the same QIDI Studio is already running, that instance will be reactivated instead." msgstr "" msgid "Automatically transfer modified value when switching process and filament presets" msgstr "" msgid "After closing, a popup will appear to ask each time" msgstr "" msgid "Auto plate type" msgstr "" msgid "Studio will remember build plate selected last time for certain printer model." msgstr "" msgid "All" msgstr "" msgid "Disabled" msgstr "" msgid "Auto Flush" msgstr "" msgid "Auto calculate flush volumes" msgstr "" msgid "Multi-device Management(Take effect after restarting Studio)." msgstr "" msgid "With this option enabled, you can send a task to multiple devices at the same time and manage multiple devices." msgstr "" msgid "Show the step mesh parameter setting dialog." msgstr "" msgid "If enabled,a parameter settings dialog will appear during STEP file import." msgstr "" msgid "Support beta version update." msgstr "" msgid "With this option enabled, you can receive beta version updates." msgstr "" msgid "Remove the restriction on mixed printing of high and low temperature filaments." msgstr "" msgid "With this option enabled, you can print materials with a large temperature difference together." msgstr "" msgid "Clear my choice for synchronizing printer preset after loading the file." msgstr "" msgid "Clear my choice for Load 3mf dialog settings." msgstr "" msgid "Show the warning dialog again when importing non-QIDI 3MF files" msgstr "" msgid "3D Settings" msgstr "" msgid "Zoom to mouse position" msgstr "" msgid "Zoom in towards the mouse pointer's position in the 3D view, rather than the 2D window center." msgstr "" msgid "Always show shells in preview" msgstr "" msgid "Always show shells or not in preview view tab.If change value,you should reslice." msgstr "" msgid "Import a single SVG and split it" msgstr "" msgid "Import a single SVG and then split it to several parts." msgstr "" msgid "Enable gamma correction for the imported obj file" msgstr "" msgid "Perform gamma correction on color after importing the obj model." msgstr "" msgid "Remember last used color scheme" msgstr "" msgid "When enabled, the last used color scheme (e.g., Line Type, Speed) will be automatically applied on next startup." msgstr "" msgid "Improve rendering performance by lod" msgstr "" msgid "Improved rendering performance under the scene of multiple plates and many models." msgstr "" msgid "Collapsible" msgstr "" msgid "Uncollapsible" msgstr "" msgid "Toolbar Style" msgstr "" msgid "Enable advanced gcode viewer" msgstr "" msgid "Enable advanced gcode viewer." msgstr "" msgid "Grabber scale" msgstr "" msgid "Set grabber size for move,rotate,scale tool." msgstr "" msgid "Value range" msgstr "" msgid "Presets" msgstr "" msgid "Auto sync user presets(Printer/Filament/Process)" msgstr "" msgid "If enabled, auto sync user presets with cloud after QIDI Studio startup or presets modified." msgstr "" msgid "Auto check for system presets updates" msgstr "" msgid "If enabled, auto check whether there are system presets updates after QIDI Studio startup." msgstr "" msgid "Associate Files To QIDI Studio" msgstr "" msgid "Associate .3mf files to QIDI Studio" msgstr "" msgid "If enabled, sets QIDI Studio as default application to open .3mf files" msgstr "" msgid "Associate .stl files to QIDI Studio" msgstr "" msgid "If enabled, sets QIDI Studio as default application to open .stl files" msgstr "" msgid "Associate .step/.stp files to QIDI Studio" msgstr "" msgid "If enabled, sets QIDI Studio as default application to open .step files" msgstr "" msgid "Online Models" msgstr "" msgid "Show online staff-picked models on the home page" msgstr "" msgid "Show history on the home page" msgstr "" msgid "Reminder During Slicing" msgstr "" msgid "Automatic mode" msgstr "" msgid "Maximum recent projects" msgstr "" msgid "Maximum count of recent projects" msgstr "" msgid "Clear my choice on the unsaved projects." msgstr "" msgid "No warnings when loading 3MF with modified G-codes" msgstr "" msgid "Auto-Backup" msgstr "" msgid "Backup your project periodically for restoring from the occasional crash." msgstr "" msgid "every" msgstr "" msgid "The peroid of backup in seconds." msgstr "" msgid "Downloads" msgstr "" msgid "Media" msgstr "" msgid "Keep liveview when printing." msgstr "" msgid "By default, Liveview will pause after 15 minutes of inactivity on the computer. Check this box to disable this feature during printing." msgstr "" msgid "Dark Mode" msgstr "" msgid "Enable dark mode" msgstr "" msgid "Pop up to select filament grouping mode" msgstr "" msgid "User Experience" msgstr "" msgid "Join Customer Experience Improvement Program." msgstr "" msgid "What data would be collected?" msgstr "" msgid "Auto-fill previously logged-in accounts." msgstr "" msgid "Develop Mode" msgstr "" msgid "Develop mode" msgstr "" msgid "Skip AMS blacklist check" msgstr "" msgid "Home page and daily tips" msgstr "" msgid "Show home page on startup" msgstr "" msgid "Sync settings" msgstr "" msgid "User sync" msgstr "" msgid "Preset sync" msgstr "" msgid "Preferences sync" msgstr "" msgid "View control settings" msgstr "" msgid "Rotate of view" msgstr "" msgid "Move of view" msgstr "" msgid "Zoom of view" msgstr "" msgid "Other" msgstr "" msgid "Mouse wheel reverses when zooming" msgstr "" msgid "Enable SSL(MQTT)" msgstr "" msgid "Enable SSL(FTP)" msgstr "" msgid "Internal developer mode" msgstr "" msgid "Log Level" msgstr "" msgid "fatal" msgstr "" msgid "error" msgstr "" msgid "warning" msgstr "" msgid "debug" msgstr "" msgid "trace" msgstr "" msgid "Host Setting" msgstr "" msgid "DEV host: api-dev.qidi3d.com/v1" msgstr "" msgid "QA host: api-qa.qidi3d.com/v1" msgstr "" msgid "PRE host: api-pre.qidi3d.com/v1" msgstr "" msgid "Product host" msgstr "" msgid "debug save button" msgstr "" msgid "save debug settings" msgstr "" msgid "DEBUG settings have saved successfully!" msgstr "" msgid "Switch cloud environment, Please login again!" msgstr "" msgid "System presets" msgstr "" msgid "User presets" msgstr "" msgid "Incompatible presets" msgstr "" msgid "My Printer" msgstr "" msgid "Left filaments" msgstr "" msgid "AMS filaments" msgstr "" msgid "Right filaments" msgstr "" msgid "Click to pick filament color" msgstr "" msgid "Add/Remove presets" msgstr "" msgid "Edit preset" msgstr "" msgid "Project-inside presets" msgstr "" msgid "System" msgstr "" msgid "Unsupported presets" msgstr "" msgid "Unsupported" msgstr "" msgid "Add/Remove filaments" msgstr "" msgid "Add/Remove materials" msgstr "" msgid "Select/Remove printers(system presets)" msgstr "" msgid "Create printer" msgstr "" msgid "Incompatible" msgstr "" msgid "The selected preset is null!" msgstr "" msgid "End" msgstr "" msgid "Customize" msgstr "" msgid "Other layer filament sequence" msgstr "" msgid "Please input layer value (>= 2)." msgstr "" msgid "Same as Global Plate Type" msgstr "" msgid "Bed type" msgstr "" msgid "Same as Global Print Sequence" msgstr "" msgid "Print sequence" msgstr "" msgid "Same as Global" msgstr "" msgid "Enable" msgstr "" msgid "Disable" msgstr "" msgid "Spiral vase" msgstr "" msgid "First layer filament sequence" msgstr "" msgid "Same as Global Bed Type" msgstr "" msgid "By Layer" msgstr "" msgid "By Object" msgstr "" msgid "Plate name" msgstr "" msgid "Move the current plate to" msgstr "" msgid "Move forward" msgstr "" msgid "Move backwards" msgstr "" msgid "Move to the front" msgstr "" msgid "Move to the back" msgstr "" msgid "Accept" msgstr "" msgid "Log Out" msgstr "" msgid "Slice all plate to obtain time and filament estimation" msgstr "" msgid "Packing project data into 3mf file" msgstr "" msgid "Uploading 3mf" msgstr "" msgid "Jump to model publish web page" msgstr "" msgid "Note: The preparation may take several minutes. Please be patient." msgstr "" msgid "Publish" msgstr "" msgid "Publish was cancelled" msgstr "" msgid "Slicing Plate 1" msgstr "" msgid "Packing data to 3mf" msgstr "" msgid "Jump to webpage" msgstr "" #, possible-c-format, possible-boost-format msgid "Save %s as" msgstr "" msgid "User Preset" msgstr "" msgid "Preset Inside Project" msgstr "" msgid "Name is unavailable." msgstr "" msgid "Overwrite a system profile is not allowed" msgstr "" #, possible-boost-format msgid "Preset \"%1%\" already exists." msgstr "" #, possible-boost-format msgid "Preset \"%1%\" already exists and is incompatible with current printer." msgstr "" msgid "Please note that saving action will replace this preset" msgstr "" msgid "The name cannot be the same as a preset alias name." msgstr "" msgid "Save preset" msgstr "" msgctxt "PresetName" msgid "Copy" msgstr "" #, possible-boost-format msgid "Printer \"%1%\" is selected with preset \"%2%\"" msgstr "" #, possible-boost-format msgid "Please choose an action with \"%1%\" preset after saving." msgstr "" #, possible-boost-format msgid "For \"%1%\", change \"%2%\" to \"%3%\" " msgstr "" #, possible-boost-format msgid "For \"%1%\", add \"%2%\" as a new preset" msgstr "" #, possible-boost-format msgid "Simply switch to \"%1%\"" msgstr "" msgid "" "Turning off this option will affect print quality if:\n" "1. Uncalibrated hotends is used\n" "2. The current nozzle, heatbed, or chamber temperature differs from the calibration conditions\n" "3. The toolhead hotend was manually removed or installed" msgstr "" msgid "After modifying this option, the system will reassign the nozzles based on the calibrated dynamic flow calibration coefficient." msgstr "" msgid "There are not enough available hotends currently." msgstr "" msgid "No hotends available." msgstr "" msgid "Please complete the hotend rack setup and try again." msgstr "" msgid "Please refresh the nozzle information and try again." msgstr "" msgid "Please re-slice." msgstr "" msgid "Please re-slice to avoid filament waste." msgstr "" msgid "Task canceled" msgstr "" msgid "QIDI Cool Plate" msgstr "" msgid "QIDI Engineering Plate" msgstr "" msgid "QIDI Smooth PEI Plate" msgstr "" msgid "High temperature Plate" msgstr "" msgid "QIDI Textured PEI Plate" msgstr "" msgid "QIDI Cool Plate SuperTack" msgstr "" msgid "Send print job" msgstr "" msgid "On" msgstr "" msgid "Not satisfied with the grouping of filaments? Regroup and slice ->" msgstr "" msgid "Manually change external spool during printing for multi-color printing" msgstr "" msgid "Multi-color with external" msgstr "" msgid "Your filament grouping method in the sliced file is not optimal." msgstr "" msgid "Auto Bed Leveling" msgstr "" msgid "" "This checks the flatness of heatbed. Leveling makes extruded height uniform.\n" "*Automatic mode: Run a leveling check(about 10 seconds). Skip if surface is fine." msgstr "" msgid "Flow Dynamics Calibration" msgstr "" msgid "" "This process determines the dynamic flow values to improve overall print quality.\n" "*Automatic mode: Skip if the filament was calibrated recently." msgstr "" msgid "Nozzle Offset Calibration" msgstr "" msgid "" "Calibrate nozzle offsets to enhance print quality.\n" "*Automatic mode: Check for calibration before printing. Skip if unnecessary." msgstr "" msgid "Nozzles and filaments of the same type share the same PA profile" msgstr "" msgid "send completed" msgstr "" msgid "Error code" msgstr "" #, possible-c-format, possible-boost-format msgid "Filament %s does not match the filament in AMS slot %s. Please update the printer firmware to support AMS slot assignment." msgstr "" msgid "Filament does not match the filament in AMS slot. Please update the printer firmware to support AMS slot assignment." msgstr "" #, possible-c-format, possible-boost-format msgid "The selected printer (%s) is incompatible with the print file configuration (%s). Please adjust the printer preset in the prepare page or choose a compatible printer on this page." msgstr "" msgid "When enable spiral vase mode, machines with I3 structure will not generate timelapse videos." msgstr "" msgid "The current printer does not support timelapse in Traditional Mode when printing By-Object." msgstr "" msgid "Errors" msgstr "" msgid "More than one filament types have been mapped to the same external spool, which may cause printing issues. The printer won't pause during printing." msgstr "" msgid "The filament type setting of external spool is different from the filament in the slicing file." msgstr "" msgid "The printer type selected when generating G-Code is not consistent with the currently selected printer. It is recommended that you use the same printer type for slicing." msgstr "" msgid "There are some unknown filaments in the AMS mappings. Please check whether they are the required filaments. If they are okay, press \"Confirm\" to start printing." msgstr "" msgid "Please check the following:" msgstr "" msgid "Please fix the error above, otherwise printing cannot continue." msgstr "" msgid "Please click the confirm button if you still want to proceed with printing." msgstr "" msgid "This checks the flatness of heatbed. Leveling makes extruded height uniform." msgstr "" msgid "This process determines the dynamic flow values to improve overall print quality." msgstr "" msgid "Preparing print job" msgstr "" msgid "Abnormal print file data. Please slice again" msgstr "" msgid "As the print job has been successfully sent, the cancellation will not bring the print job to a halt. If you need to terminate this job, please stop it in 'Device' page." msgstr "" msgid "The name length exceeds the limit." msgstr "" #, possible-c-format, possible-boost-format msgid "Cost %dg filament and %d changes more than optimal grouping." msgstr "" msgid "nozzle" msgstr "" msgid "both extruders" msgstr "" #, possible-c-format, possible-boost-format msgid "[ %s ] requires printing in a high-temperature environment.Please close the door." msgstr "" #, possible-c-format, possible-boost-format msgid "[ %s ] requires printing in a high-temperature environment." msgstr "" #, possible-c-format, possible-boost-format msgid "The filament on %s may soften. Please unload." msgstr "" #, possible-c-format, possible-boost-format msgid "The filament on %s is unknown and may soften. Please set filament." msgstr "" msgid "" "Upper half area: Original\n" "Middle area: Filament in AMS\n" "Lower half area: Selected nozzle\n" "And you can click it to modify" msgstr "" msgid "Unable to automatically match to suitable filament. Please click to manually match." msgstr "" msgid "Install toolhead enhanced cooling fan to prevent filament softening." msgstr "" #, possible-c-format, possible-boost-format msgid "Refreshing information of hotends(%d/%d)." msgstr "" msgid "Please wait a moment..." msgstr "" msgid "The toolhead and hotend rack are full. Please remove at least one hotend before printing." msgstr "" #, possible-c-format, possible-boost-format msgid "The nozzle flow setting of %s(%s) doesn't match with the slicing file(%s). Please make sure the nozzle installed matches with settings in printer, then set the corresponding printer preset while slicing." msgstr "" msgid "Tips: If you changed your nozzle of your printer lately, Please go to 'Device -> Printer parts' to change your nozzle setting." msgstr "" #, possible-c-format, possible-boost-format msgid "The %s diameter(%.1fmm) of current printer doesn't match with the slicing file (%.1fmm). Please make sure the nozzle installed matches with settings in printer, then set the corresponding printer preset when slicing." msgstr "" #, possible-c-format, possible-boost-format msgid "The current nozzle diameter (%.1fmm) doesn't match with the slicing file (%.1fmm). Please make sure the nozzle installed matches with settings in printer, then set the corresponding printer preset when slicing." msgstr "" #, possible-c-format, possible-boost-format msgid "The hardness of current material (%s) exceeds the hardness of %s(%s). Please verify the nozzle or material settings and try again." msgstr "" #, possible-c-format, possible-boost-format msgid "Failed to send nozzle auto-mapping request to printer { code: %d }. Please try to refresh the printer information. If it still does not recover, you can try to rebind the printer and check the network connection." msgstr "" msgid "The printer is calculating nozzle mapping." msgstr "" #, possible-c-format, possible-boost-format msgid "Failed to receive nozzle auto-mapping table from printer { msg: %s }. Please refresh the printer information." msgstr "" #, possible-c-format, possible-boost-format msgid "The printer failed to build the nozzle auto-mapping table { code: %d }. Please refreash nozzle information." msgstr "" #, possible-c-format, possible-boost-format msgid "The current nozzle mapping may produce an extra %0.2f g of waste." msgstr "" msgid "Cool" msgstr "" msgid "Engineering" msgstr "" msgid "High Temp" msgstr "" msgid "Cool(Supertack)" msgstr "" msgid "Click here if you can't connect to the printer" msgstr "" msgid "Sliced file" msgstr "" msgid "No login account, only printers in LAN mode are displayed" msgstr "" msgid "Connecting to server" msgstr "" msgid "Synchronizing device information" msgstr "" msgid "Synchronizing device information time out" msgstr "" msgid "Cannot send the print job when the printer is not at FDM mode" msgstr "" msgid "Cannot send the print job when the printer is updating firmware" msgstr "" msgid "The printer is executing instructions. Please restart printing after it ends" msgstr "" msgid "AMS is setting up. Please try again later." msgstr "" msgid "Not all filaments used in slicing are mapped to the printer. Please check the mapping of filaments." msgstr "" msgid "Please do not mix-use the Ext with AMS" msgstr "" msgid "Invalid nozzle information, please refresh or manually set nozzle information." msgstr "" msgid "Storage is not available or is in read-only mode." msgstr "" msgid "Storage needs to be inserted before printing." msgstr "" msgid "Cannot send the print job to a printer whose firmware is required to get updated." msgstr "" msgid "Cannot send the print job for empty plate" msgstr "" msgid "Storage needs to be inserted to record timelapse." msgstr "" msgid "You have selected both external and AMS filaments for an extruder. You will need to manually switch the external filament during printing." msgstr "" msgid "TPU 90A/TPU 85A is too soft and does not support automatic Flow Dynamics calibration." msgstr "" msgid "Set dynamic flow calibration to 'OFF' to enable custom dynamic flow value." msgstr "" msgid "This printer does not support printing all plates" msgstr "" msgid "The current firmware supports a maximum of 16 materials. You can either reduce the number of materials to 16 or fewer on the Preparation Page, or try updating the firmware. If you are still restricted after the update, please wait for subsequent firmware support." msgstr "" msgid "High chamber temperature is required. Please close the door." msgstr "" msgid "Please check if the required nozzle diameter and flow rate match the current display." msgstr "" msgid "Please refer to Wiki before use->" msgstr "" msgid "How to install" msgstr "" msgid "Current firmware does not support file transfer to internal storage." msgstr "" msgid "Send to Printer storage" msgstr "" msgid "Try to connect" msgstr "" msgid "Internal Storage" msgstr "" msgid "External Storage" msgstr "" msgid "Upload file timeout, please check if the firmware version supports it." msgstr "" msgid "Connection timed out, please check your network." msgstr "" msgid "Connection failed. Click the icon to retry" msgstr "" msgid "Cannot send the print task when the upgrade is in progress" msgstr "" msgid "The selected printer is incompatible with the chosen printer presets." msgstr "" msgid "Storage needs to be inserted before send to printer." msgstr "" msgid "The printer is required to be in the same LAN as QIDI Studio." msgstr "" msgid "The printer does not support sending to printer storage." msgstr "" msgid "Sending..." msgstr "" msgid "File upload timed out. Please check if the firmware version supports this operation or verify if the printer is functioning properly." msgstr "" msgid "Sending failed, please try again!" msgstr "" msgid "Helio action completed successfully." msgstr "" msgid "Slice ok." msgstr "" msgid "View all Daily tips" msgstr "" msgid "Failed to create socket" msgstr "" msgid "Failed to connect socket" msgstr "" msgid "Failed to publish login request" msgstr "" msgid "Get ticket from device timeout" msgstr "" msgid "Get ticket from server timeout" msgstr "" msgid "Failed to post ticket to server" msgstr "" msgid "Failed to parse login report reason" msgstr "" msgid "Receive login report timeout" msgstr "" msgid "Unknown Failure" msgstr "" msgid "" "Please Find the Pin Code in Account page on printer screen,\n" " and type in the Pin Code below." msgstr "" msgid "Can't find Pin Code?" msgstr "" msgid "Pin Code" msgstr "" msgid "Binding..." msgstr "" msgid "Please confirm on the printer screen" msgstr "" msgid "Log in failed. Please check the Pin Code." msgstr "" msgid "Log in printer" msgstr "" msgid "Would you like to log in this printer with current account?" msgstr "" msgid "Check the reason" msgstr "" msgid "Read and accept" msgstr "" msgid "Terms and Conditions" msgstr "" msgid "Thank you for purchasing a QIDI Tech device.Before using your QIDI Tech device, please read the termsand conditions.By clicking to agree to use your QIDI Tech device, you agree to abide by the Privacy Policy and Terms of Use(collectively, the \"Terms\"). If you do not comply with or agree to the QIDI Tech Privacy Policy, please do not use QIDI Tech equipment and services." msgstr "" msgid "and" msgstr "" msgid "Privacy Policy" msgstr "" msgid "We ask for your help to improve everyone's printer" msgstr "" msgid "Statement about User Experience Improvement Program" msgstr "" #, possible-c-format, possible-boost-format msgid "In the 3D Printing community, we learn from each other's successes and failures to adjust our own slicing parameters and settings. %s follows the same principle and uses machine learning to improve its performance from the successes and failures of the vast number of prints by our users. We are training %s to be smarter by feeding them the real-world data. If you are willing, this service will access information from your error logs and usage logs, which may include information described in Privacy Policy. We will not collect any Personal Data by which an individual can be identified directly or indirectly, including without limitation names, addresses, payment information, or phone numbers. By enabling this service, you agree to these terms and the statement about Privacy Policy." msgstr "" msgid "Statement on User Experience Improvement Plan" msgstr "" msgid "Log in successful." msgstr "" msgid "Log out printer" msgstr "" msgid "Would you like to log out the printer?" msgstr "" msgid "Please log in first." msgstr "" msgid "There was a problem connecting to the printer. Please try again." msgstr "" msgid "Failed to log out." msgstr "" #. TRN "Save current Settings" #, possible-c-format, possible-boost-format msgid "Save current %s" msgstr "" msgid "Delete this preset" msgstr "" msgid "Search in preset" msgstr "" msgid "Synchronization of different extruder drives or nozzle volume types is not supported." msgstr "" msgid "Synchronize the modification of parameters to the corresponding parameters of another extruder." msgstr "" msgid "Click to learn more" msgstr "" msgid "Click to reset all settings to the last saved preset." msgstr "" msgid "Prime tower is required for nozzle changing. There may be flaws on the model without prime tower. Are you sure you want to disable prime tower?" msgstr "" msgid "Prime tower is required for smooth timeplase. There may be flaws on the model without prime tower. Are you sure you want to disable prime tower?" msgstr "" msgid "Prime tower is required for clumping detection. There may be flaws on the model without prime tower. Are you sure you want to disable prime tower?" msgstr "" msgid "Enabling both precise Z height and the prime tower may cause the size of prime tower to increase. Do you still want to enable?" msgstr "" msgid "Prime tower is required for clumping detection. There may be flaws on the model without prime tower. Do you still want to enable clumping detection?" msgstr "" msgid "Prime tower is required for smooth timelapse. There may be flaws on the model without prime tower. Do you want to enable prime tower?" msgstr "" msgid "Still print by object?" msgstr "" msgid "" "Non-soluble support materials are not recommended for support base. \n" "Are you sure to use them for support base? \n" msgstr "" msgid "" "When using PLA to support TPU, We recommend the following settings:\n" "0 top z distance, 0 interface spacing, 0 support/object xy distance, interlaced rectilinear pattern, disable \n" "independent support layer height and use PLA for both support interface and support base" msgstr "" msgid "" "When using soluble material for the support, We recommend the following settings:\n" "0 top z distance, 0 interface spacing, 0 support/object xy distance, interlaced rectilinear pattern, disable \n" "independent support layer height and use soluble materials for both support interface and support base" msgstr "" msgid "" "Change these settings automatically? \n" "Yes - Change these settings automatically\n" "No - Do not change these settings for me" msgstr "" msgid "" "When using support material for the support interface, We recommend the following settings:\n" "0 top z distance, 0 interface spacing, interlaced rectilinear pattern and disable independent support layer height" msgstr "" msgid "" "When using soluble material for the support interface, We recommend the following settings:\n" "0 top z distance, 0 interface spacing, 0 support/object xy distance, interlaced rectilinear pattern, disable \n" "independent support layer height and use soluble materials for both support interface and support base" msgstr "" msgid "" "Layer height is too small.\n" "It will set to min_layer_height\n" msgstr "" msgid "Layer height exceeds the limit in Printer Settings -> Extruder -> Layer height limits ,this may cause printing quality issues." msgstr "" msgid "Adjust to the set range automatically? \n" msgstr "" msgid "Adjust" msgstr "" msgid "Ignore" msgstr "" msgid "Experimental feature: Retracting and cutting off the filament at a greater distance during filament changes to minimize flush.Although it can notably reduce flush, it may also elevate the risk of nozzle clogs or other printing complications." msgstr "" msgid "Experimental feature: Retracting and cutting off the filament at a greater distance during filament changes to minimize flush.Although it can notably reduce flush, it may also elevate the risk of nozzle clogs or other printing complications.Please use with the latest printer firmware." msgstr "" msgid "" "When recording timelapse without toolhead, it is recommended to add a \"Timelapse Wipe Tower\" \n" "by right-click the empty position of build plate and choose \"Add Primitive\"->\"Timelapse Wipe Tower\"." msgstr "" msgid "Switching to a printer with different extruder types or numbers will discard or reset changes to extruder or multi-nozzle-related parameters." msgstr "" msgid "The notes are too large, and may not be synchronized to the cloud. Please keep it within 40k." msgstr "" msgid "Line width" msgstr "" msgid "Seam" msgstr "" msgid "Precision" msgstr "" msgid "Wall generator" msgstr "" msgid "Walls" msgstr "" msgid "Top/bottom shells" msgstr "" msgid "Sparse infill" msgstr "" msgid "Initial layer speed" msgstr "" msgid "Other layers speed" msgstr "" msgid "Overhang speed" msgstr "" msgid "This is the speed for various overhang degrees. Overhang degrees are expressed as a percentage of line width. 0 speed means no slowing down for the overhang degree range and wall speed is used" msgstr "" msgid "Travel speed" msgstr "" msgid "Acceleration" msgstr "" msgid "Jerk(XY)" msgstr "" msgid "Raft" msgstr "" msgid "Support filament" msgstr "" msgid "Tree Support" msgstr "" msgid "Prime tower" msgstr "" msgid "Special mode" msgstr "" msgid "G-code output" msgstr "" msgid "Post-processing scripts" msgstr "" msgid "Notes" msgstr "" msgid "Frequent" msgstr "" #, possible-c-format, possible-boost-format msgid "" "Following line %s contains reserved keywords.\n" "Please remove it, or will beat G-code visualization and printing time estimation." msgid_plural "" "Following lines %s contain reserved keywords.\n" "Please remove them, or will beat G-code visualization and printing time estimation." msgstr[0] "" msgstr[1] "" msgid "Reserved keywords found" msgstr "" msgid "Custom G-code files are too large, and may not be synchronized to the cloud. Please keep it within 40k." msgstr "" msgid "Setting Overrides" msgstr "" msgid "Retraction" msgstr "" msgid "Basic information" msgstr "" msgid "Filament prime volume" msgstr "" msgid "The volume of material to prime extruder on tower." msgstr "" msgid "Filament ramming length" msgstr "" msgid "Filament length used in ramming." msgstr "" msgid "Travel time after ramming" msgstr "" msgid "A reverse travel movement after ramming." msgstr "" msgid "Precooling target temperature" msgstr "" msgid "Precooling target temperature during ramming." msgstr "" msgid "Recommended nozzle temperature" msgstr "" msgid "Recommended nozzle temperature range of this filament. 0 means no set" msgstr "" msgid "Print temperature" msgstr "" msgid "Bed temperature when cool plate is installed. Value 0 means the filament does not support to print on the QIDI Cool Plate SuperTack" msgstr "" msgid "Cool Plate" msgstr "" msgid "Bed temperature when cool plate is installed. Value 0 means the filament does not support to print on the Cool Plate" msgstr "" msgid "Engineering Plate" msgstr "" msgid "Bed temperature when engineering plate is installed. Value 0 means the filament does not support to print on the Engineering Plate" msgstr "" msgid "Smooth PEI Plate / High Temp Plate" msgstr "" msgid "Bed temperature when Smooth PEI Plate/High temperature plate is installed. Value 0 means the filament does not support to print on the Smooth PEI Plate/High Temp Plate" msgstr "" msgid "Textured PEI Plate" msgstr "" msgid "Bed temperature when Textured PEI Plate is installed. Value 0 means the filament does not support to print on the Textured PEI Plate" msgstr "" msgid "Nozzle temperature when printing" msgstr "" msgid "Volumetric speed limitation" msgstr "" msgid "Ramming volumetric speed" msgstr "" msgid "The maximum volumetric speed for ramming, where -1 means using the maximum volumetric speed." msgstr "" msgid "Filament scarf seam settings" msgstr "" msgid "Cooling for specific layer" msgstr "" msgid "Special cooling settings" msgstr "" msgid "set addition fan speed before fist x layer" msgstr "" msgid "Part cooling fan" msgstr "" msgid "Min fan speed threshold" msgstr "" msgid "Part cooling fan speed will start to run at min speed when the estimated layer time is no longer than the layer time in setting. When layer time is shorter than threshold, fan speed is interpolated between the minimum and maximum fan speed according to layer printing time" msgstr "" msgid "Max fan speed threshold" msgstr "" msgid "Part cooling fan speed will be max when the estimated layer time is shorter than the setting value" msgstr "" msgid "Auxiliary part cooling fan" msgstr "" msgid "Exhaust fan" msgstr "" msgid "During print" msgstr "" msgid "Complete print" msgstr "" msgid "Filament start G-code" msgstr "" msgid "Filament end G-code" msgstr "" msgid "Multi Filament" msgstr "" msgid "Printable space" msgstr "" msgid "Extruder Clearance" msgstr "" msgid "Accessory" msgstr "" msgid "Machine gcode" msgstr "" msgid "Machine start G-code" msgstr "" msgid "Machine end G-code" msgstr "" msgid "Printing by object G-code" msgstr "" msgid "Before layer change G-code" msgstr "" msgid "Layer change G-code" msgstr "" msgid "Time lapse G-code" msgstr "" msgid "Clumping Detection G-code" msgstr "" msgid "Change filament G-code" msgstr "" msgid "Pause G-code" msgstr "" msgid "Template Custom G-code" msgstr "" msgid "Motion ability" msgstr "" msgid "Normal" msgstr "" msgid "Speed limitation" msgstr "" msgid "Acceleration limitation" msgstr "" msgid "Jerk limitation" msgstr "" msgid "Single extruder MM setup" msgstr "" msgid "Single extruder multimaterial parameters" msgstr "" msgid "Layer height limits" msgstr "" msgid "Retraction when switching material" msgstr "" msgid "" "The Wipe option is not available when using the Firmware Retraction mode.\n" "\n" "Shall I disable it in order to enable Firmware Retraction?" msgstr "" msgid "Firmware Retraction" msgstr "" msgid "Detached" msgstr "" #, possible-c-format, possible-boost-format msgid "%d Filament Preset and %d Process Preset is attached to this printer. Those presets would be deleted if the printer is deleted." msgstr "" msgid "Presets inherited by other presets can not be deleted!" msgstr "" msgid "The following presets inherit this preset." msgid_plural "The following preset inherits this preset." msgstr[0] "" msgstr[1] "" #. TRN Remove/Delete #, possible-boost-format msgid "%1% Preset" msgstr "" msgid "Following preset will be deleted too." msgid_plural "Following presets will be deleted too." msgstr[0] "" msgstr[1] "" msgid "" "Are you sure to delete the selected preset? \n" "If the preset corresponds to a filament currently in use on your printer, please reset the filament information for that slot." msgstr "" #, possible-boost-format msgid "Are you sure to %1% the selected preset?" msgstr "" msgid "Set" msgstr "" #, possible-c-format, possible-boost-format msgid "%s: %s" msgstr "" msgid "No modifications need to be copied." msgstr "" msgid "Copy paramters" msgstr "" msgid "Modify paramters of right nozzle" msgstr "" msgid "Modify paramters of left nozzle" msgstr "" msgid "Do you want to modify the following parameters of the right nozzle to that of the left nozzle?" msgstr "" msgid "Do you want to modify the following parameters of the left nozzle to that of the right nozzle?" msgstr "" msgid "No available nozzles for current preset" msgstr "" msgid "Available nozzles for current preset: " msgstr "" msgid "Click to reset current value and attach to the global value." msgstr "" msgid "Click to drop current modify and reset to saved value." msgstr "" msgid "Process Settings" msgstr "" msgid "Undef" msgstr "" msgid "Discard or Use Modified Value" msgstr "" msgid "Save or Discard Modified Value" msgstr "" msgid "Unsaved Changes" msgstr "" msgid "Use Modified Value of Process Preset" msgstr "" msgid "Use Modified Value of Filament Preset" msgstr "" msgid "Use Modified Value of Printer Preset" msgstr "" msgid "Preset(Old)" msgstr "" msgid "Modified Value(New)" msgstr "" msgid "Discard Modified Value" msgstr "" msgid "Don't save" msgstr "" msgid "Use Modified Value" msgstr "" msgid "Click the right mouse button to display the full text." msgstr "" msgid "All changes will not be saved" msgstr "" msgid "All changes will be discarded." msgstr "" msgid "Save the selected options." msgstr "" msgid "Keep the selected options." msgstr "" msgid "Transfer the selected options to the newly selected preset." msgstr "" #, possible-boost-format msgid "" "Save the selected options to preset \n" "\"%1%\"." msgstr "" #, possible-boost-format msgid "" "Transfer the selected options to the newly selected preset \n" "\"%1%\"." msgstr "" #, possible-boost-format msgid "Preset \"%1%\" contains the following unsaved changes:" msgstr "" #, possible-boost-format msgid "Preset \"%1%\" is not compatible with the new printer profile and it contains the following unsaved changes:" msgstr "" #, possible-boost-format msgid "Preset \"%1%\" is not compatible with the new process profile and it contains the following unsaved changes:" msgstr "" #, possible-boost-format msgid "You have changed the preset \"%1%\". " msgstr "" msgid "" "\n" "Do you want to use the modified value in the new preset that you selected?" msgstr "" msgid "You have changed the preset. " msgstr "" msgid "" "\n" "Do you want to save the modified values?" msgstr "" msgid "Extruders count" msgstr "" msgid "General" msgstr "" msgid "Capabilities" msgstr "" msgid "Left: " msgstr "" msgid "Right: " msgstr "" msgid "Select presets to compare" msgstr "" msgid "Show all presets (including incompatible)" msgstr "" msgid "Add File" msgstr "" msgid "Set as cover" msgstr "" msgid "Cover" msgstr "" #, possible-boost-format msgid "The name \"%1%\" already exists." msgstr "" msgid "Basic Info" msgstr "" msgid "Pictures" msgstr "" msgid "Bill of Materials" msgstr "" msgid "Assembly Guide" msgstr "" msgid "Author" msgstr "" msgid "Model Name" msgstr "" #, possible-c-format, possible-boost-format msgid "%s Update" msgstr "" msgid "A new version is available" msgstr "" msgid "Configuration update" msgstr "" msgid "A new configuration package available, Do you want to install it?" msgstr "" msgid "Description:" msgstr "" msgid "Configuration incompatible" msgstr "" msgid "the configuration package is incompatible with current application." msgstr "" #, possible-c-format, possible-boost-format msgid "" "The configuration package is incompatible with current application.\n" "%s will update the configuration package, Otherwise it won't be able to start" msgstr "" #, possible-c-format, possible-boost-format msgid "Exit %s" msgstr "" msgid "the Configuration package is incompatible with current APP." msgstr "" msgid "Configuration updates" msgstr "" msgid "No updates available." msgstr "" msgid "The configuration is up to date." msgstr "" msgid "Open Wiki for more information >" msgstr "" msgid "Obj file Import color" msgstr "" msgid "Some faces don't have color defined." msgstr "" msgid "mtl file exist error,could not find the material:" msgstr "" msgid "Please check obj or mtl file." msgstr "" msgid "Specify number of colors:" msgstr "" msgid "Enter or click the adjustment button to modify number again" msgstr "" msgid "Recommended " msgstr "" msgid "view" msgstr "" msgid "Current filament colors" msgstr "" msgid "Matching" msgstr "" msgid "Quick set" msgstr "" msgid "Color match" msgstr "" msgid "Approximate color matching." msgstr "" msgid "Append" msgstr "" msgid "Append to existing filaments" msgstr "" msgid "Reset mapped extruders." msgstr "" msgid "Note" msgstr "" msgid "" "The color has been selected, you can choose OK \n" " to continue or manually adjust it." msgstr "" msgid "—> " msgstr "" msgid "" "Synchronizing AMS filaments will discard your modified but unsaved filament presets.\n" "Are you sure you want to continue?" msgstr "" msgctxt "Sync_AMS" msgid "Original" msgstr "" msgid "After mapping" msgstr "" msgid "After overwriting" msgstr "" msgctxt "Sync_AMS" msgid "Plate" msgstr "" msgid "The connected printer does not match the currently selected printer. Please change the selected printer." msgstr "" msgid "Mapping" msgstr "" msgid "Overwriting" msgstr "" msgid "Reset all filament mapping" msgstr "" msgid "Left Extruder" msgstr "" msgid "(Recommended filament)" msgstr "" msgid "Right Extruder" msgstr "" msgid "Advanced Options" msgstr "" msgid "" "Check heatbed flatness. Leveling makes extruded height uniform.\n" "*Automatic mode: Level first (about 10 seconds). Skip if surface is fine." msgstr "" msgid "" "Calibrate nozzle offsets to enhance print quality.\n" "*Automatic mode: Check for calibration before printing; skip if unnecessary." msgstr "" msgid "Use AMS" msgstr "" msgid "Tip" msgstr "" msgid "Only synchronize filament type and color, not including AMS slot information." msgstr "" msgid "Replace the project filaments list sequentially based on printer filaments. And unused printer filaments will be automatically added to the end of the list." msgstr "" msgid "Advanced settings" msgstr "" msgid "Add unused AMS filaments to filaments list." msgstr "" msgid "Automatically merge the same colors in the model after mapping." msgstr "" msgid "After being synced, this action cannot be undone." msgstr "" msgid "After being synced, the project's filament presets and colors will be replaced with the mapped filament types and colors. This action cannot be undone." msgstr "" msgid "Are you sure to synchronize the filaments?" msgstr "" msgid "Synchronize now" msgstr "" msgid "Synchronize Filament Information" msgstr "" msgid "Add unused filaments to filaments list." msgstr "" msgid "Only synchronize filament type and color, not including slot information." msgstr "" msgid "Ext spool" msgstr "" msgid "Please check whether the nozzle type of the device is the same as the preset nozzle type." msgstr "" #, possible-c-format, possible-boost-format msgid "The selected printer (%s) is incompatible with the chosen printer profile in the slicer (%s)." msgstr "" msgid "Timelapse is not supported because Print sequence is set to \"By object\"." msgstr "" msgid "You selected external and AMS filament at the same time in an extruder, you will need manually change external filament." msgstr "" msgid "Successfully synchronized nozzle information." msgstr "" msgid "Successfully synchronized nozzle and AMS number information." msgstr "" msgid "Continue to sync filaments" msgstr "" msgctxt "Sync_Nozzle_AMS" msgid "Cancel" msgstr "" msgid "Successfully synchronized color and type of filament from printer." msgstr "" msgctxt "FinishSyncAms" msgid "OK" msgstr "" msgid "Studio would re-calculate your flushing volumes everytime the filaments color changed or filaments changed. You could disable the auto-calculate in QIDI Studio > Preferences" msgstr "" msgid "Flushing volume (mm³) for each filament pair." msgstr "" #, possible-c-format, possible-boost-format msgid "Suggestion: Flushing Volume in range [%d, %d]" msgstr "" #, possible-c-format, possible-boost-format msgid "The multiplier should be in range [%.2f, %.2f]." msgstr "" msgid "Re-calculate" msgstr "" msgid "Left extruder" msgstr "" msgid "Right extruder" msgstr "" msgid "Multiplier" msgstr "" msgid "Flushing volumes for filament change" msgstr "" msgid "Please choose the filament colour" msgstr "" msgid "QIDI Network plug-in not detected." msgstr "" msgid "Click here to download it." msgstr "" msgid "Login" msgstr "" msgid "The configuration package is changed to the previous Config Guide" msgstr "" msgid "Configuration package changed" msgstr "" msgid "Toolbar" msgstr "" msgid "Objects list" msgstr "" msgid "Import geometry data from STL/STEP/3MF/OBJ/AMF files" msgstr "" msgid "Paste from clipboard" msgstr "" msgid "Show/Hide 3Dconnexion devices settings dialog" msgstr "" msgid "Switch tab page" msgstr "" msgid "Show keyboard shortcuts list" msgstr "" msgid "Global shortcuts" msgstr "" msgid "Rotate View" msgstr "" msgid "Pan View" msgstr "" msgid "Zoom View" msgstr "" msgid "Shift+A" msgstr "" msgid "Shift+R" msgstr "" msgid "Auto orientates selected objects or all objects.If there are selected objects, it just orientates the selected ones.Otherwise, it will orientates all objects in the current disk." msgstr "" msgid "Shift+Tab" msgstr "" msgid "Collapse/Expand the sidebar" msgstr "" msgid "Any arrow" msgstr "" msgid "Movement in camera space" msgstr "" msgid "Select a part" msgstr "" msgid "Shift+Left mouse button" msgstr "" msgid "Select objects by rectangle" msgstr "" msgid "Arrow Up" msgstr "" msgid "Move selection 10 mm in positive Y direction" msgstr "" msgid "Arrow Down" msgstr "" msgid "Move selection 10 mm in negative Y direction" msgstr "" msgid "Arrow Left" msgstr "" msgid "Move selection 10 mm in negative X direction" msgstr "" msgid "Arrow Right" msgstr "" msgid "Move selection 10 mm in positive X direction" msgstr "" msgid "Shift+Any arrow" msgstr "" msgid "Movement step set to 1 mm" msgstr "" msgid "keyboard 1-9: set filament for object/part" msgstr "" msgid "Camera view - Default" msgstr "" msgid "Camera view - Top" msgstr "" msgid "Camera view - Bottom" msgstr "" msgid "Camera view - Front" msgstr "" msgid "Camera view - Behind" msgstr "" msgid "Camera view - Left" msgstr "" msgid "Camera view - Right" msgstr "" msgid "Camera view - Isometric" msgstr "" msgid "Select all objects" msgstr "" msgid "Shift+D" msgstr "" msgid "Gizmo move" msgstr "" msgid "Gizmo scale" msgstr "" msgid "Gizmo rotate" msgstr "" msgid "Gizmo cut" msgstr "" msgid "Gizmo Place face on bed" msgstr "" msgid "Gizmo SLA support points" msgstr "" msgid "Gizmo FDM paint-on seam" msgstr "" msgid "Plater" msgstr "" msgid "Support/Color Painting: adjust pen radius" msgstr "" msgid "Support/Color Painting: adjust section position" msgstr "" msgid "Gizmo" msgstr "" msgid "Set extruder number for the objects and parts" msgstr "" msgid "Delete objects, parts, modifiers " msgstr "" msgid "Space" msgstr "" msgid "Select the object/part and press space to change the name" msgstr "" msgid "Mouse click" msgstr "" msgid "Select the object/part and mouse click to change the name" msgstr "" msgid "Objects List" msgstr "" msgid "Vertical slider - Move active thumb Up" msgstr "" msgid "Vertical slider - Move active thumb Down" msgstr "" msgid "Horizontal slider - Move active thumb Left" msgstr "" msgid "Horizontal slider - Move active thumb Right" msgstr "" msgid "On/Off one layer mode of the vertical slider" msgstr "" msgid "Move slider 5x faster" msgstr "" msgid "Shift+Mouse wheel" msgstr "" msgid "Release Note" msgstr "" #, possible-c-format, possible-boost-format msgid "version %s update information :" msgstr "" msgid "Network plug-in update" msgstr "" msgid "Click OK to update the Network plug-in when QIDI Studio launches next time." msgstr "" #, possible-c-format, possible-boost-format msgid "A new Network plug-in(%s) available, Do you want to install it?" msgstr "" msgid "New version of QIDI Studio" msgstr "" msgid "Skip this Version" msgstr "" msgid "resume" msgstr "" msgid "Confirm and Update Nozzle" msgstr "" msgid "Connect the printer using IP and access code" msgstr "" msgid "Try the following methods to update the connection parameters and reconnect to the printer." msgstr "" msgid "1. Please confirm QIDI Studio and your printer are in the same LAN." msgstr "" msgid "2. If the IP and Access Code below are different from the actual values on your printer, please correct them." msgstr "" msgid "3. Please obtain the device SN from the printer side; it is usually found in the device information on the printer screen." msgstr "" msgid "Access Code" msgstr "" msgid "Printer model" msgstr "" msgid "Where to find your printer's IP and Access Code?" msgstr "" msgid "Connect" msgstr "" msgid "IP and Access Code Verified! You may close the window" msgstr "" msgid "connecting..." msgstr "" msgid "Failed to connect to printer." msgstr "" msgid "Failed to publish login request." msgstr "" msgid "The printer has already been bound." msgstr "" msgid "The printer mode is incorrect, please switch to LAN Only." msgstr "" msgid "Connecting to printer... The dialog will close later" msgstr "" msgid "Connection failed, please double check IP and Access Code" msgstr "" msgid "" "Connection failed! If your IP and Access Code is correct, \n" "please move to step 3 for troubleshooting network issues" msgstr "" msgid "Connection failed! Please refer to the wiki page." msgstr "" msgid "sending failed" msgstr "" msgid "Failed to send. Click Retry to attempt sending again. If retrying does not work, please check the reason." msgstr "" msgid "reconnect" msgstr "" msgid "Third-party Extension" msgstr "" msgid "Stronger parts, less warping, faster prints - powered by fast physics-based FEM simulation" msgstr "" msgid "Uninstall the Helio Additive extension" msgstr "" msgid "Use Immediately" msgstr "" msgid "Third-Party Extension" msgstr "" msgid "HELIO ADDITIVE" msgstr "" msgid "Helio Additive third - party software service feature has been successfully enabled!" msgstr "" msgid "Helio-PAT" msgstr "" msgid "Copy successful!" msgstr "" msgid "Helio Additive" msgstr "" msgid "Privacy Policy of Helio Additive" msgstr "" msgid "Terms of Use of Helio Additive" msgstr "" msgid "Agree and proceed" msgstr "" msgid "Got it" msgstr "" msgid "Failed to get Helio PAT, Click Refresh to obtain it again." msgstr "" msgid "Failed to obtain PAT. The quantity limit has been reached, so it cannot be obtained. Click the refresh button to re-obtain PAT." msgstr "" msgid "Simulation" msgstr "" msgid "Optimization" msgstr "" msgid "Environment Temperature" msgstr "" msgid "Chamber Temperature" msgstr "" msgid "Note: Adjust the above temperature based on actual conditions. More accurate data ensures more precise analysis results." msgstr "" msgid "Helio's advanced feature for power users: available post purchase on its official website." msgstr "" msgid "Monthly quota remaining: " msgstr "" msgid "Add-ons available: " msgstr "" msgid "Optimise Outer Walls" msgstr "" msgid "Helio default (recommended)" msgstr "" msgid "Slicer default" msgstr "" msgid "Limits" msgstr "" msgid "Min Velocity" msgstr "" msgid "Max Velocity" msgstr "" msgid "Min Volumetric Speed" msgstr "" msgid "Max Volumetric Speed" msgstr "" msgid "Last Trace ID: " msgstr "" msgid "Buy Now / Manage Account" msgstr "" msgid "Click for more details" msgstr "" msgid "Start Simulation" msgstr "" msgid "Start Optimization" msgstr "" msgid "Buy add-ons" msgstr "" msgid "Layers to Optimize " msgstr "" msgid "Failed to obtain Helio PAT. The number of issued PATs has reached the upper limit. Please pay attention to the information on the Helio official website. Click Refresh to get it again once it is available." msgstr "" msgid "Print Time Improvement" msgstr "" msgid "Average Improvement" msgstr "" msgid "Consistency Improvement" msgstr "" msgid "Your gcode has been improved for the best possible print. To further improve your print please check out our wiki for tips & tricks on what to do next." msgstr "" msgid "Air Pump" msgstr "" msgid "Laser 10W" msgstr "" msgid "Laser 40W" msgstr "" msgid "Cutting Module" msgstr "" msgid "Auto Fire Extinguishing System" msgstr "" msgid "Update firmware" msgstr "" msgid "Hotends on Rack" msgstr "" msgid "Beta version" msgstr "" msgid "Refreshing hotend information..." msgstr "" msgid "Checking version..." msgstr "" msgid "Updating" msgstr "" msgid "Updating failed" msgstr "" msgid "Updating successful" msgstr "" msgid "Are you sure you want to update? This will take about 10 minutes. Do not turn off the power while the printer is updating." msgstr "" msgid "An important update was detected and needs to be run before printing can continue. Do you want to update now? You can also update later from 'Upgrade firmware'." msgstr "" msgid "The firmware version is abnormal. Repairing and updating are required before printing. Do you want to update now? You can also update later on printer or update next time starting the studio." msgstr "" msgid "Extension Board" msgstr "" msgid "Do you want to save the changes ?" msgstr "" msgid "Saving objects into the 3mf failed." msgstr "" msgid "Only Windows 10 is supported." msgstr "" msgid "Failed to initialize the WinRT library." msgstr "" msgid "Exporting objects" msgstr "" msgid "Failed loading objects." msgstr "" msgid "Repairing object by Windows service" msgstr "" msgid "Repair failed." msgstr "" msgid "Loading repaired objects" msgstr "" msgid "Exporting 3mf file failed" msgstr "" msgid "Import 3mf file failed" msgstr "" msgid "Repaired 3mf file does not contain any object" msgstr "" msgid "Repaired 3mf file contains more than one object" msgstr "" msgid "Repaired 3mf file does not contain any volume" msgstr "" msgid "Repaired 3mf file contains more than one volume" msgstr "" msgid "Repair finished" msgstr "" msgid "Repair canceled" msgstr "" msgid "Need to check the unsaved changes before configuration updates." msgstr "" msgid "Configuration package updated to " msgstr "" msgid "Open G-code file:" msgstr "" msgid "The following object(s) have empty initial layer and can't be printed. Please cut the bottom or enable supports." msgstr "" #, possible-boost-format msgid "Object can't be printed for empty layer between %1% and %2%." msgstr "" #, possible-boost-format msgid "Object: %1%" msgstr "" msgid "Maybe parts of the object at these height are too thin, or the object has faulty mesh" msgstr "" msgid "Flush volumes matrix do not match to the correct size!" msgstr "" msgid "No object can be printed. Maybe too small" msgstr "" msgid "" "Failed to generate gcode for invalid custom G-code.\n" "\n" msgstr "" msgid "Please check the custom G-code or use the default custom G-code.\n" msgstr "" msgid "You can find them from 'Printer settings' -> 'Machine G-code' and 'Filament settings' -> 'Advanced'." msgstr "" msgid "You can find it from 'Printer settings' -> 'Machine G-code'." msgstr "" msgid "You can find it from 'Filament settings' -> 'Advanced'." msgstr "" #, possible-boost-format msgid "Generating G-code: layer %1%" msgstr "" msgid "Smoothing z direction speed" msgstr "" msgid "Exporting G-code" msgstr "" msgid "Grouping error: " msgstr "" msgid " can not be placed in the " msgstr "" msgid "Group error in manual mode. Please check nozzle count or regroup." msgstr "" msgid "Inner wall" msgstr "" msgid "Outer wall" msgstr "" msgid "Overhang wall" msgstr "" msgid "Floating vertical shell" msgstr "" msgid "Internal solid infill" msgstr "" msgid "Top surface" msgstr "" msgid "Bottom surface" msgstr "" msgid "Bridge" msgstr "" msgid "Gap infill" msgstr "" msgid "Support interface" msgstr "" msgid "Support transition" msgstr "" msgid "Multiple" msgstr "" msgid "Flush" msgstr "" #, possible-boost-format msgid "Failed to calculate line width of %1%. Can not get value of \"%2%\" " msgstr "" msgid "undefined error" msgstr "" msgid "too many files" msgstr "" msgid "file too large" msgstr "" msgid "unsupported method" msgstr "" msgid "unsupported encryption" msgstr "" msgid "unsupported feature" msgstr "" msgid "failed finding central directory" msgstr "" msgid "not a ZIP archive" msgstr "" msgid "invalid header or corrupted" msgstr "" msgid "unsupported multidisk" msgstr "" msgid "decompression failed" msgstr "" msgid "compression failed" msgstr "" msgid "unexpected decompressed size" msgstr "" msgid "CRC check failed" msgstr "" msgid "unsupported central directory size" msgstr "" msgid "allocation failed" msgstr "" msgid "file open failed" msgstr "" msgid "file create failed" msgstr "" msgid "file write failed" msgstr "" msgid "file read failed" msgstr "" msgid "file close failed" msgstr "" msgid "file seek failed" msgstr "" msgid "file stat failed" msgstr "" msgid "invalid parameter" msgstr "" msgid "invalid filename" msgstr "" msgid "buffer too small" msgstr "" msgid "internal error" msgstr "" msgid "file not found" msgstr "" msgid "archive too large" msgstr "" msgid "validation failed" msgstr "" msgid "write callback failed" msgstr "" #, possible-boost-format msgid "%1% is too close to exclusion area, there may be collisions when printing." msgstr "" #, possible-boost-format msgid "%1% is too close to others, and collisions may be caused." msgstr "" #, possible-boost-format msgid "%1% is too tall, and collisions will be caused." msgstr "" msgid " is too close to exclusion area, there may be collisions when printing." msgstr "" msgid " is too close to clumping detection area, there may be collisions when printing." msgstr "" msgid "Prime Tower" msgstr "" msgid " is too close to others, and collisions may be caused.\n" msgstr "" msgid " is too close to exclusion area, and collisions will be caused.\n" msgstr "" msgid " is too close to clumping detection area, and collisions will be caused.\n" msgstr "" msgid "Printing high-temp and low-temp filaments together may cause nozzle clogging or printer damage." msgstr "" msgid "Printing high-temp and low-temp filaments together may cause nozzle clogging or printer damage. If you still want to print, you can enable the option in Preferences." msgstr "" msgid "Printing different-temp filaments together may cause nozzle clogging or printer damage." msgstr "" msgid "Printing high-temp and mid-temp filaments together may cause nozzle clogging or printer damage." msgstr "" msgid "Printing mid-temp and low-temp filaments together may cause nozzle clogging or printer damage." msgstr "" msgid "No extrusions under current settings." msgstr "" msgid "Smooth mode of timelapse is not supported when \"by object\" sequence is enabled." msgstr "" msgid "Clumping detection is not supported when \"by object\" sequence is enabled." msgstr "" msgid "Prime tower is required for clumping detection; otherwise, there may be flaws on the model." msgstr "" msgid "Please select \"By object\" print sequence to print multiple objects in spiral vase mode." msgstr "" msgid "The spiral vase mode does not work when an object contains more than one materials." msgstr "" msgid "Variable layer height is not supported with Organic supports." msgstr "" msgid "Different nozzle diameters and different filament diameters is not allowed when prime tower is enabled." msgstr "" msgid "The Wipe Tower is currently only supported with the relative extruder addressing (use_relative_e_distances=1)." msgstr "" msgid "Ooze prevention is currently not supported with the prime tower enabled." msgstr "" msgid "The prime tower is currently only supported for the Marlin, RepRap/Sprinter, RepRapFirmware and Repetier G-code flavors." msgstr "" msgid "The prime tower is not supported in \"By object\" print." msgstr "" msgid "The prime tower is not supported when adaptive layer height is on. It requires that all objects have the same layer height." msgstr "" msgid "The prime tower requires \"support gap\" to be multiple of layer height" msgstr "" msgid "The prime tower requires that all objects have the same layer heights" msgstr "" msgid "The prime tower requires that all objects are printed over the same number of raft layers" msgstr "" msgid "The prime tower requires that all objects are sliced with the same layer heights." msgstr "" msgid "The prime tower is only supported if all objects have the same variable layer height" msgstr "" msgid "Too small line width" msgstr "" msgid "Too large line width" msgstr "" msgid "The prime tower requires that support has the same layer height as object." msgstr "" msgid "Support enforcers are used but support is not enabled. Please enable support." msgstr "" msgid "Layer height cannot exceed nozzle diameter" msgstr "" #, possible-c-format, possible-boost-format msgid "Plate %d: %s does not support filament %s" msgstr "" msgid "Generating skirt & brim" msgstr "" msgid "Generating G-code" msgstr "" msgid "Failed processing of the filename_format template." msgstr "" msgid "Printable area" msgstr "" msgid "Extruder printable area" msgstr "" msgid "Bed exclude area" msgstr "" msgid "Unprintable area in XY plane. For example, X1 Series printers use the front left corner to cut filament during filament change. The area is expressed as polygon by points in following format: \"XxY, XxY, ...\"" msgstr "" msgid "Bed custom texture" msgstr "" msgid "Bed custom model" msgstr "" msgid "Elephant foot compensation" msgstr "" msgid "Shrink the initial layer on build plate to compensate for elephant foot effect" msgstr "" msgid "Slicing height for each layer. Smaller layer height means more accurate and more printing time" msgstr "" msgid "Printable height" msgstr "" msgid "Maximum printable height which is limited by mechanism of printer" msgstr "" msgid "Extruder printable height" msgstr "" msgid "Maximum printable height of this extruder which is limited by mechanism of printer" msgstr "" msgid "Printer preset names" msgstr "" msgid "Hostname, IP or URL" msgstr "" msgid "Slic3r can upload G-code files to a printer host. This field should contain the hostname, IP address or URL of the printer host instance. Print host behind HAProxy with basic auth enabled can be accessed by putting the user name and password into the URL in the following format: https://username:password@your-octopi-address/" msgstr "" msgid "Device UI" msgstr "" msgid "Specify the URL of your device user interface if it's not same as print_host" msgstr "" msgid "API Key / Password" msgstr "" msgid "Slic3r can upload G-code files to a printer host. This field should contain the API Key or the password required for authentication." msgstr "" msgid "Name of the printer" msgstr "" msgid "HTTPS CA File" msgstr "" msgid "Custom CA certificate file can be specified for HTTPS OctoPrint connections, in crt/pem format. If left blank, the default OS CA certificate repository is used." msgstr "" msgid "User" msgstr "" msgid "Password" msgstr "" msgid "Ignore HTTPS certificate revocation checks" msgstr "" msgid "Ignore HTTPS certificate revocation checks in case of missing or offline distribution points. One may want to enable this option for self signed certificates if connection fails." msgstr "" msgid "Names of presets related to the physical printer" msgstr "" msgid "Authorization Type" msgstr "" msgid "API key" msgstr "" msgid "HTTP digest" msgstr "" msgid "Avoid crossing wall" msgstr "" msgid "Detour and avoid traveling across wall which may cause blob on surface" msgstr "" msgid "Smoothing wall speed along Z(experimental)" msgstr "" msgid "Smoothing outwall speed in z direction to get better surface quality. Print time will increases. This does not work on spiral vase mode." msgstr "" msgid "Avoid crossing wall - Max detour length" msgstr "" msgid "Maximum detour distance for avoiding crossing wall. Don't detour if the detour distance is larger than this value. Detour length could be specified either as an absolute value or as percentage (for example 50%) of a direct travel path. Zero to disable" msgstr "" msgid "mm or %" msgstr "" msgid "Avoid crossing wall - Includes support" msgstr "" msgid "Including support while avoiding crossing wall." msgstr "" msgid "Other layers" msgstr "" msgid "Bed temperature for layers except the initial one. Value 0 means the filament does not support to print on the Cool Plate" msgstr "" msgid "Bed temperature for layers except the initial one. Value 0 means the filament does not support to print on the Engineering Plate" msgstr "" msgid "Bed temperature for layers except the initial one. Value 0 means the filament does not support to print on the High Temp Plate" msgstr "" msgid "Bed temperature for layers except the initial one. Value 0 means the filament does not support to print on the Textured PEI Plate" msgstr "" msgid "Initial layer" msgstr "" msgid "Initial layer bed temperature" msgstr "" msgid "Bed temperature of the initial layer. Value 0 means the filament does not support to print on the QIDI Cool Plate SuperTack" msgstr "" msgid "Bed temperature of the initial layer. Value 0 means the filament does not support to print on the Cool Plate" msgstr "" msgid "Bed temperature of the initial layer. Value 0 means the filament does not support to print on the Engineering Plate" msgstr "" msgid "Bed temperature of the initial layer. Value 0 means the filament does not support to print on the High Temp Plate" msgstr "" msgid "Bed temperature of the initial layer. Value 0 means the filament does not support to print on the Textured PEI Plate" msgstr "" msgid "Bed types supported by the printer" msgstr "" msgid "First layer print sequence" msgstr "" msgid "Other layers print sequence" msgstr "" msgid "The number of other layers print sequence" msgstr "" msgid "Other layers filament sequence" msgstr "" msgid "This G-code is inserted at every layer change before lifting z" msgstr "" msgid "Bottom shell layers" msgstr "" msgid "This is the number of solid layers of bottom shell, including the bottom surface layer. When the thickness calculated by this value is thinner than bottom shell thickness, the bottom shell layers will be increased" msgstr "" msgid "Bottom shell thickness" msgstr "" msgid "The number of bottom solid layers is increased when slicing if the thickness calculated by bottom shells layers is thinner than this value. This can avoid having too thin shell when layer height is small. 0 means that this setting is disabled and thickness of bottom shell is absolutely determained by bottom shell layers" msgstr "" msgid "Force cooling for overhang and bridge" msgstr "" msgid "Enable this option to optimize part cooling fan speed for overhang and bridge to get better cooling" msgstr "" msgid "Fan speed for overhang" msgstr "" msgid "Force part cooling fan to be at this speed when printing bridge or overhang wall which has large overhang degree. Forcing cooling for overhang and bridge can get better quality for these part" msgstr "" msgid "Pre start fan time" msgstr "" msgid "Force fan start early(0-5 second) when encountering overhangs. This is because the fan needs time to physically increase its speed." msgstr "" msgid "s" msgstr "" msgid "Cooling overhang threshold" msgstr "" #, possible-c-format msgid "Force cooling fan to be specific speed when overhang degree of printed part exceeds this value. Expressed as percentage which indicides how much width of the line without support from lower layer. 0% means forcing cooling for all outer wall no matter how much overhang degree" msgstr "" msgid "Overhang threshold for participating cooling" msgstr "" #, possible-c-format msgid "Decide which overhang part join the cooling function to slow down the speed.Expressed as percentage which indicides how much width of the line without support from lower layer. 100% means forcing cooling for all outer wall no matter how much overhang degree" msgstr "" msgid "Bridge direction" msgstr "" msgid "Bridging angle override. If left to zero, the bridging angle will be calculated automatically. Otherwise the provided angle will be used for external bridges. Use 180°for zero angle." msgstr "" msgid "Bridge flow" msgstr "" msgid "Decrease this value slightly(for example 0.9) to reduce the amount of material for bridge, to improve sag" msgstr "" msgid "Top surface flow ratio" msgstr "" msgid "This factor affects the amount of material for top solid infill. You can decrease it slightly to have smooth surface finish" msgstr "" msgid "Initial layer flow ratio" msgstr "" msgid "This factor affects the amount of material for the initial layer" msgstr "" msgid "Only one wall on top surfaces" msgstr "" msgid "Use only one wall on flat top surface, to give more space to the top infill pattern. Could be applied on topmost surface or all top surface." msgstr "" msgid "Not apply" msgstr "" msgid "Top surfaces" msgstr "" msgid "Topmost surface" msgstr "" msgid "Top area threshold" msgstr "" msgid "The min width of top areas in percentage of perimeter line width." msgstr "" msgid "Only one wall on first layer" msgstr "" msgid "Use only one wall on the first layer of model" msgstr "" msgid "Slow down for overhang" msgstr "" msgid "Enable this option to slow printing down for different overhang degree" msgstr "" msgid "mm/s" msgstr "" #, possible-c-format, possible-boost-format msgid "Speed of 100%% overhang wall which has 0 overlap with the lower layer." msgstr "" msgid "Slow down by height" msgstr "" msgid "Enable this option to slow printing down by height" msgstr "" msgid "Starting height" msgstr "" msgid "The height starts to slow down" msgstr "" msgid "Speed at starting height" msgstr "" msgid "Acceleration at starting height" msgstr "" msgid "mm/s²" msgstr "" msgid "Ending height" msgstr "" msgid "The height finishes slowing down, Ending height should be larger than Starting height, or the slowing down will not work!" msgstr "" msgid "Speed at ending height" msgstr "" msgid "Acceleration at ending height" msgstr "" msgid "Speed of bridge and completely overhang wall" msgstr "" msgid "Brim width" msgstr "" msgid "Distance from model to the outermost brim line" msgstr "" msgid "Brim type" msgstr "" msgid "This controls the generation of the brim at outer and/or inner side of models. Auto means the brim width is analysed and calculated automatically." msgstr "" msgid "Brim-object gap" msgstr "" msgid "A gap between innermost brim line and object can make brim be removed more easily" msgstr "" msgid "Compatible machine" msgstr "" msgid "upward compatible machine" msgstr "" msgid "Compatible machine condition" msgstr "" msgid "Compatible process profiles" msgstr "" msgid "Compatible process profiles condition" msgstr "" msgid "Print sequence, layer by layer or object by object" msgstr "" msgid "By layer" msgstr "" msgid "By object" msgstr "" msgid "Slow printing down for better layer cooling" msgstr "" msgid "Enable this option to slow printing speed down to make the final layer time not shorter than the layer time threshold in \"Max fan speed threshold\", so that layer can be cooled for a longer time. This can improve the cooling quality for needle and small details" msgstr "" msgid "Don't slow down outer walls" msgstr "" msgid "" "If enabled, this setting will ensure external perimeters are not slowed down to meet the minimum layer time. This is particularly helpful in the below scenarios:\n" "1. To avoid changes in shine when printing glossy filaments\n" "2. To avoid changes in external wall speed which may create slight wall artifacts that appear like Z banding\n" "3. To avoid printing at speeds which cause VFAs (fine artifacts) on the external walls" msgstr "" msgid "Normal printing" msgstr "" msgid "The default acceleration of both normal printing and travel except initial layer" msgstr "" msgid "The acceleration of travel except initial layer" msgstr "" msgid "Initial layer travel" msgstr "" msgid "The acceleration of travel of initial layer" msgstr "" msgid "Default filament profile" msgstr "" msgid "Default filament profile when switch to this machine profile" msgstr "" msgid "Default process profile" msgstr "" msgid "Default process profile when switch to this machine profile" msgstr "" msgid "Activate air filtration" msgstr "" msgid "Activate for better air filtration" msgstr "" msgid "Fan speed" msgstr "" msgid "Speed of exhaust fan during printing.This speed will overwrite the speed in filament custom gcode" msgstr "" msgid "Speed of exhuast fan after printing completes" msgstr "" msgid "For the first" msgstr "" msgid "Set special cooling fan for the first certain layers. Cooling fan of the first layer used to be closed to get better build plate adhesion and used for auto cooling function" msgstr "" msgid "layers" msgstr "" msgid "Special cooling fan speed for the first certain layers" msgstr "" msgid "Don't support bridges" msgstr "" msgid "Don't support the whole bridge area which makes support very large. Bridge usually can be printing directly without support if not very long" msgstr "" msgid "Thick bridges" msgstr "" msgid "If enabled, bridges are more reliable, can bridge longer distances, but may look worse. If disabled, bridges look better but are reliable just for shorter bridged distances." msgstr "" msgid "Max bridge length" msgstr "" msgid "Max length of bridges that don't need support. Set it to 0 if you want all bridges to be supported, and set it to a very large value if you don't want any bridges to be supported." msgstr "" msgid "End G-code" msgstr "" msgid "End G-code when finish the whole printing" msgstr "" msgid "Between Object Gcode" msgstr "" msgid "Insert Gcode between objects. This parameter will only come into effect when you print your models object by object" msgstr "" msgid "End G-code when finish the printing of this filament" msgstr "" msgid "Ensure vertical shell thickness" msgstr "" msgid "Add solid infill near sloping surfaces to guarantee the vertical shell thickness (top+bottom solid layers)" msgstr "" msgid "Partial" msgstr "" msgid "Enabled" msgstr "" msgid "Vertical shell speed" msgstr "" msgid "Speed for vertical shells with overhang regions. If expressed as percentage (for example: 80%) it will be calculated onthe internal solid infill speed above" msgstr "" msgid "mm/s or %" msgstr "" msgid "Detect floating vertical shells" msgstr "" msgid "Detect overhang paths in vertical shells and slow them by bridge speed." msgstr "" msgid "Internal bridge support thickness" msgstr "" msgid "When sparse infill density is low, the internal solid infill or internal bridge may have no archor at the end of line. This causes falling and bad quality when printing internal solid infill. When enable this feature, loop paths will be added to the sparse fill of the lower layers for specific thickness, so that better archor can be provided for internal bridge. 0 means disable this feature" msgstr "" msgid "Top surface pattern" msgstr "" msgid "Line pattern of top surface infill" msgstr "" msgid "Concentric" msgstr "" msgid "Rectilinear" msgstr "" msgid "Monotonic" msgstr "" msgid "Monotonic line" msgstr "" msgid "Aligned Rectilinear" msgstr "" msgid "Hilbert Curve" msgstr "" msgid "Archimedean Chords" msgstr "" msgid "Octagram Spiral" msgstr "" msgid "Bottom surface pattern" msgstr "" msgid "Line pattern of bottom surface infill, not bridge infill" msgstr "" msgid "Internal solid infill pattern" msgstr "" msgid "Line pattern of internal solid infill. if the detect narrow internal solid infill be enabled, the concentric pattern will be used for the small area." msgstr "" msgid "Line width of outer wall" msgstr "" msgid "Speed of outer wall which is outermost and visible. It's used to be slower than inner wall speed to get better quality." msgstr "" msgid "Small perimeters" msgstr "" msgid "This setting will affect the speed of perimeters having radius <= small perimeter threshold(usually holes). If expressed as percentage (for example: 80%) it will be calculated onthe outer wall speed setting above. Set to zero for auto." msgstr "" msgid "Small perimeter threshold" msgstr "" msgid "This sets the threshold for small perimeter length. Default threshold is 0mm" msgstr "" msgid "Order of walls" msgstr "" msgid "Print sequence of inner wall and outer wall. " msgstr "" msgid "inner/outer" msgstr "" msgid "outer/inner" msgstr "" msgid "inner wall/outer wall/inner wall" msgstr "" msgid "Print infill first" msgstr "" msgid "Order of wall/infill. false means print wall first. " msgstr "" msgid "Height to rod" msgstr "" msgid "Distance of the nozzle tip to the lower rod. Used for collision avoidance in by-object printing." msgstr "" msgid "Height to lid" msgstr "" msgid "Distance of the nozzle tip to the lid. Used for collision avoidance in by-object printing." msgstr "" msgid "Distance to rod" msgstr "" msgid "Horizontal distance of the nozzle tip to the rod's farther edge. Used for collision avoidance in by-object printing." msgstr "" msgid "Nozzle height" msgstr "" msgid "The height of nozzle tip." msgstr "" msgid "Max Radius" msgstr "" msgid "Max clearance radius around extruder. Used for collision avoidance in by-object printing." msgstr "" msgid "Grab length" msgstr "" msgid "Extruder Color" msgstr "" msgid "Only used as a visual help on UI" msgstr "" msgid "Extruder offset" msgstr "" msgid "Flow ratio" msgstr "" msgid "The material may have volumetric change after switching between molten state and crystalline state. This setting changes all extrusion flow of this filament in gcode proportionally. Recommended value range is between 0.95 and 1.05. Maybe you can tune this value to get nice flat surface when there has slight overflow or underflow" msgstr "" msgid "Object flow ratio" msgstr "" msgid "The flow ratio set by object, the meaning is the same as flow ratio." msgstr "" msgid "Enable pressure advance" msgstr "" msgid "Enable pressure advance, auto calibration result will be overwriten once enabled. Useless for QIDI Printer" msgstr "" msgid "Pressure advance(Klipper) AKA Linear advance factor(Marlin). Useless for QIDI Printer" msgstr "" msgid "Filament notes" msgstr "" msgid "You can put your notes regarding the filament here." msgstr "" msgid "Process notes" msgstr "" msgid "You can put your notes regarding the process here." msgstr "" msgid "Printer notes" msgstr "" msgid "You can put your notes regarding the printer here." msgstr "" msgid "Default line width if some line width is set to be zero" msgstr "" msgid "Keep fan always on" msgstr "" msgid "If enable this setting, part cooling fan will never be stopped and will run at least at minimum speed to reduce the frequency of starting and stopping" msgstr "" msgid "Layer time" msgstr "" msgid "Part cooling fan will be enabled for layers of which estimated time is shorter than this value. Fan speed is interpolated between the minimum and maximum fan speeds according to layer printing time" msgstr "" msgid "Default color" msgstr "" msgid "Default filament color" msgstr "" msgid "Required nozzle HRC" msgstr "" msgid "Minimum HRC of nozzle required to print the filament. Zero means no checking of nozzle's HRC." msgstr "" msgid "Filament map to extruder" msgstr "" msgid "filament mapping mode" msgstr "" msgid "Auto For Flush" msgstr "" msgid "Auto For Match" msgstr "" msgid "Manual" msgstr "" msgid "Nozzle Manual" msgstr "" msgid "Flush temperature" msgstr "" msgid "temperature when flushing filament. 0 indicates the upper bound of the recommended nozzle temperature range" msgstr "" msgid "Flush volumetric speed" msgstr "" msgid "Volumetric speed when flushing filament. 0 indicates the max volumetric speed" msgstr "" msgid "mm³/s" msgstr "" msgid "This setting stands for how much volume of filament can be melted and extruded per second. Printing speed is limited by max volumetric speed, in case of too high and unreasonable speed setting. Can't be zero" msgstr "" msgid "Extruder change" msgstr "" msgid "The maximum volumetric speed for ramming before extruder change, where -1 means using the maximum volumetric speed." msgstr "" msgid "Hotend change" msgstr "" msgid "The maximum volumetric speed for ramming before a hotend change, where -1 means using the maximum volumetric speed." msgstr "" msgid "Minimal purge on wipe tower" msgstr "" msgid "mm³" msgstr "" msgid "Filament load time" msgstr "" msgid "Time to load new filament when switch filament. For statistics only" msgstr "" msgid "Filament unload time" msgstr "" msgid "Time to unload old filament when switch filament. For statistics only" msgstr "" msgid "Extruder switch time" msgstr "" msgid "Time to switch extruder. For statistics only" msgstr "" msgid "Hotend change time" msgstr "" msgid "Time to change hotend." msgstr "" msgid "Bed temperature type" msgstr "" msgid "This option determines how the bed temperature is set during slicing: based on the temperature of the first filament or the highest temperature of the printed filaments." msgstr "" msgid "By First filament" msgstr "" msgid "By Highest Temp" msgstr "" msgid "Filament diameter is used to calculate extrusion in gcode, so it's important and should be accurate" msgstr "" msgid "Adaptive volumetric speed" msgstr "" msgid "When enabled, the extrusion flow is limited by the smaller of the fitted value (calculated from line width and layer height) and the user-defined maximum flow. When disabled, only the user-defined maximum flow is applied." msgstr "" msgid "Max volumetric speed multinomial coefficients" msgstr "" msgid "Shrinkage" msgstr "" #, no-c-format, no-boost-format msgid "" "Enter the shrinkage percentage that the filament will get after cooling (94% if you measure 94mm instead of 100mm). The part will be scaled in xy to compensate. Only the filament used for the perimeter is taken into account.\n" "Be sure to allow enough space between objects, as this compensation is done after the checks." msgstr "" msgid "Velocity Adaptation Factor" msgstr "" msgid "This parameter reflects the speed at which a material transitions from one state to another. It, along with the smooth coefficient, determines the final length of the transition zone. A larger value: requires a shorter transition zone. A smaller value: requires a longer transition zone to avoid flow instability." msgstr "" msgid "Adhesiveness Category" msgstr "" msgid "Filament category" msgstr "" msgid "Density" msgstr "" msgid "Filament density. For statistics only" msgstr "" msgid "g/cm³" msgstr "" msgid "The material type of filament" msgstr "" msgid "Soluble material" msgstr "" msgid "Soluble material is commonly used to print support and support interface" msgstr "" msgid "Scarf seam type" msgstr "" msgid "Set scarf seam type for this filament. This setting could minimize seam visibiliy." msgstr "" msgid "Contour" msgstr "" msgid "Contour and hole" msgstr "" msgid "Scarf start height" msgstr "" msgid "This amount can be specified in millimeters or as a percentage of the current layer height." msgstr "" msgid "mm/%" msgstr "" msgid "Scarf slope gap" msgstr "" msgid "In order to reduce the visiblity of the seam in closed loop, the inner wall and outer wall are shortened by a specified amount." msgstr "" msgid "Scarf length" msgstr "" msgid "Length of the scarf. Setting this parameter to zero effectively disables the scarf." msgstr "" msgid "When changing the extruder, it is recommended to extrude a certain length of filament from the original extruder. This helps minimize nozzle oozing." msgstr "" msgid "When changing the hotend, it is recommended to extrude a certain length of filament from the original nozzle. This helps minimize nozzle oozing." msgstr "" msgid "Support material" msgstr "" msgid "Support material is commonly used to print support and support interface" msgstr "" msgid "Filament printable" msgstr "" msgid "The filament is printable in extruder" msgstr "" msgid "Filament change" msgstr "" msgid "The volume of material required to prime the extruder on the tower, excluding a hotend change." msgstr "" msgid "The volume of material required to prime the extruder for a hotend change on the tower." msgstr "" msgid "Wipe tower cooling" msgstr "" msgid "Temperature drop before entering filament tower" msgstr "" msgid "Softening temperature" msgstr "" msgid "The material softens at this temperature, so when the bed temperature is equal to or greater than it, it's highly recommended to open the front door and/or remove the upper glass to avoid cloggings." msgstr "" msgid "To prevent oozing, the nozzle will perform a reverse travel movement for a certain period after the ramming is complete. The setting define the travel time." msgstr "" msgid "To prevent oozing, the nozzle temperature will be cooled during ramming. Therefore, the ramming time must be greater than the cooldown time. 0 means disabled." msgstr "" msgid "To prevent oozing, the nozzle temperature will be cooled during ramming. Note: only a cooldown command and fan activation are triggered, reaching the target temperature is not guaranteed. 0 means disabled." msgstr "" msgid "Price" msgstr "" msgid "Filament price. For statistics only" msgstr "" msgid "money/kg" msgstr "" msgid "Vendor" msgstr "" msgid "Vendor of filament. For show only" msgstr "" msgid "(Undefined)" msgstr "" msgid "Infill direction" msgstr "" msgid "Angle for sparse infill pattern, which controls the start or main direction of line" msgstr "" msgid "Sparse infill density" msgstr "" #, possible-c-format msgid "Density of internal sparse infill, 100% means solid throughout" msgstr "" msgid "Fill multiline" msgstr "" msgid "Using multiple lines for the infill pattern, if supported by infill pattern." msgstr "" msgid "Sparse infill pattern" msgstr "" msgid "Line pattern for internal sparse infill" msgstr "" msgid "Grid" msgstr "" msgid "Line" msgstr "" msgid "Cubic" msgstr "" msgid "Tri-hexagon" msgstr "" msgid "Gyroid" msgstr "" msgid "Honeycomb" msgstr "" msgid "Adaptive Cubic" msgstr "" msgid "3D Honeycomb" msgstr "" msgid "Support Cubic" msgstr "" msgid "Lightning" msgstr "" msgid "Cross Hatch" msgstr "" msgid "Zig Zag" msgstr "" msgid "Cross Zag" msgstr "" msgid "Locked Zag" msgstr "" msgid "Skin infill pattern" msgstr "" msgid "Line pattern for skin" msgstr "" msgid "Skeleton infill pattern" msgstr "" msgid "Line pattern for skeleton" msgstr "" msgid "Acceleration of top surface infill. Using a lower value may improve top surface quality" msgstr "" msgid "Acceleration of outer wall. Using a lower value can improve quality" msgstr "" msgid "Acceleration of inner walls. 0 means using normal printing acceleration" msgstr "" msgid "Acceleration of sparse infill. If the value is expressed as a percentage (e.g. 100%), it will be calculated based on the default acceleration." msgstr "" msgid "mm/s² or %" msgstr "" msgid "Acceleration of initial layer. Using a lower value can improve build plate adhensive" msgstr "" msgid "Enable accel_to_decel" msgstr "" msgid "Klipper's max_accel_to_decel will be adjusted automatically" msgstr "" msgid "accel_to_decel" msgstr "" msgid "Klipper's max_accel_to_decel will be adjusted to this percent of acceleration" msgstr "" msgid "Default jerk" msgstr "" msgid "Jerk of outer walls" msgstr "" msgid "Jerk of inner walls" msgstr "" msgid "Jerk of infill" msgstr "" msgid "Jerk of top surface" msgstr "" msgid "First layer" msgstr "" msgid "Jerk of first layer" msgstr "" msgid "Jerk of travel" msgstr "" msgid "Line width of initial layer" msgstr "" msgid "Initial layer height" msgstr "" msgid "Height of initial layer. Making initial layer height thick slightly can improve build plate adhension" msgstr "" msgid "Speed of initial layer except the solid infill part" msgstr "" msgid "Initial layer infill" msgstr "" msgid "Speed of solid infill part of initial layer" msgstr "" msgid "Initial layer nozzle temperature" msgstr "" msgid "Nozzle temperature to print initial layer when using this filament" msgstr "" msgid "Full fan speed at layer" msgstr "" msgid "Randomly jitter while printing the wall, so that the surface has a rough look. This setting controls the fuzzy position" msgstr "" msgid "None(allow paint)" msgstr "" msgid "All walls" msgstr "" msgid "Fuzzy skin thickness" msgstr "" msgid "The width within which to jitter. It's adversed to be below outer wall line width" msgstr "" msgid "Fuzzy skin point distance" msgstr "" msgid "The average distance between the random points introduced on each line segment" msgstr "" msgid "Filter out tiny gaps" msgstr "" msgid "Filter out gaps smaller than the threshold specified. Gaps smaller than this threshold will be ignored" msgstr "" msgid "Precise wall" msgstr "" msgid "Improve shell precision by adjusting outer wall spacing. This also improves layer consistency." msgstr "" msgid "Speed of gap infill. Gap usually has irregular line width and should be printed more slowly" msgstr "" msgid "Precise Z height" msgstr "" msgid "Enable this to get precise z height of object after slicing. It will get the precise object height by fine-tuning the layer heights of the last few layers. Note that this is an experimental parameter." msgstr "" msgid "Arc fitting" msgstr "" msgid "Enable this to get a G-code file which has G2 and G3 moves. And the fitting tolerance is the same as resolution" msgstr "" msgid "Add line number" msgstr "" msgid "Enable this to add line number(Nx) at the beginning of each G-Code line" msgstr "" msgid "Scan first layer" msgstr "" msgid "Enable this to enable the camera on printer to check the quality of first layer" msgstr "" msgid "Enable clumping detection" msgstr "" msgid "Clumping detection layers" msgstr "" msgid "Clumping detection layers." msgstr "" msgid "Probing exclude area of clumping" msgstr "" msgid "Probing exclude area of clumping." msgstr "" msgid "Thumbnail size" msgstr "" msgid "Decides the size of thumbnail stored in gcode files" msgstr "" msgid "Nozzle type" msgstr "" msgid "The metallic material of nozzle. This determines the abrasive resistance of nozzle, and what kind of filament can be printed" msgstr "" msgid "Undefine" msgstr "" msgid "Hardened steel" msgstr "" msgid "Stainless steel" msgstr "" msgid "Tungsten carbide" msgstr "" msgid "Printer structure" msgstr "" msgid "The physical arrangement and components of a printing device" msgstr "" msgid "Best object position" msgstr "" msgid "Best auto arranging position in range [0,1] w.r.t. bed shape." msgstr "" msgid "Enable this option if machine has auxiliary part cooling fan" msgstr "" msgid "Fan direction" msgstr "" msgid "Cooling fan direction of the printer" msgstr "" msgid "Both" msgstr "" msgid "Support control chamber temperature" msgstr "" msgid "This option is enabled if machine support controlling chamber temperature" msgstr "" msgid "Apply top surface compensation" msgstr "" msgid "Air filtration enhancement" msgstr "" msgid "Enable this if printer support air filtration enhancement." msgstr "" msgid "Use cooling filter" msgstr "" msgid "Enable this if printer support cooling filter" msgstr "" msgid "Auto turn off filter on overheat" msgstr "" msgid "G-code flavor" msgstr "" msgid "What kind of gcode the printer is compatible with" msgstr "" msgid "Exclude objects" msgstr "" msgid "Enable this option to add EXCLUDE OBJECT command in g-code for klipper firmware printer" msgstr "" msgid "Infill combination" msgstr "" msgid "Automatically Combine sparse infill of several layers to print together to reduce time. Wall is still printed with original layer height." msgstr "" msgid "Infill shift step" msgstr "" msgid "This parameter adds a slight displacement to each layer of infill to create a cross texture." msgstr "" msgid "Infill rotate step" msgstr "" msgid "This parameter adds a slight rotation to each layer of infill to create a cross texture." msgstr "" msgid "Skeleton infill density" msgstr "" msgid "The remaining part of the model contour after removing a certain depth from the surface is called the skeleton. This parameter is used to adjust the density of this section.When two regions have the same sparse infill settings but different skeleton densities, their skeleton areas will develop overlapping sections.default is as same as infill density." msgstr "" msgid "Skin infill density" msgstr "" msgid "The portion of the model's outer surface within a certain depth range is called the skin. This parameter is used to adjust the density of this section.When two regions have the same sparse infill settings but different skin densities, This area will not be split into two separate regions.default is as same as infill density." msgstr "" msgid "Skin infill depth" msgstr "" msgid "The parameter sets the depth of skin." msgstr "" msgid "Infill lock depth" msgstr "" msgid "The parameter sets the overlapping depth between the interior and skin." msgstr "" msgid "Skin line width" msgstr "" msgid "Adjust the line width of the selected skin paths." msgstr "" msgid "Skeleton line width" msgstr "" msgid "Adjust the line width of the selected skeleton paths." msgstr "" msgid "Symmetric infill y axis" msgstr "" msgid "If the model has two parts that are symmetric about the y-axis, and you want these parts to have symmetric textures, please click this option on one of the parts." msgstr "" msgid "Length of sparse infill anchor" msgstr "" msgid "Connect a sparse infill line to an internal perimeter with a short segment of an additional perimeter. If expressed as percentage (example: 15%) it is calculated over sparse infill line width. Slicer tries to connect two close infill lines to a short perimeter segment. If no such perimeter segment shorter than infill_anchor_max is found, the infill line is connected to a perimeter segment at just one side and the length of the perimeter segment taken is limited to this parameter, but no longer than anchor_length_max. Set this parameter to zero to disable anchoring perimeters connected to a single infill line." msgstr "" msgid "0 (no open anchors)" msgstr "" msgid "1000 (unlimited)" msgstr "" msgid "Maximum length of sparse infill anchor" msgstr "" msgid "Connect a sparse infill line to an internal perimeter with a short segment of an additional perimeter. If expressed as percentage (example: 15%) it is calculated over sparse infill line width. Slicer tries to connect two close infill lines to a short perimeter segment. If no such perimeter segment shorter than this parameter is found, the infill line is connected to a perimeter segment at just one side and the length of the perimeter segment taken is limited to infill_anchor, but no longer than this parameter. Set this parameter to zero to disable anchoring." msgstr "" msgid "0 (not anchored)" msgstr "" msgid "Sparse infill filament" msgstr "" msgid "Filament to print internal sparse infill." msgstr "" msgid "Line width of internal sparse infill" msgstr "" msgid "Infill/Wall overlap" msgstr "" msgid "Infill area is enlarged slightly to overlap with wall for better bonding. The percentage value is relative to line width of sparse infill" msgstr "" msgid "Speed of internal sparse infill" msgstr "" msgid "Interface shells" msgstr "" msgid "Force the generation of solid shells between adjacent materials/volumes. Useful for multi-extruder prints with translucent materials or manual soluble support material" msgstr "" msgid "Maximum width of a segmented region" msgstr "" msgid "Maximum width of a segmented region. Zero disables this feature." msgstr "" msgid "Interlocking depth of a segmented region" msgstr "" msgid "Interlocking depth of a segmented region. Zero disables this feature." msgstr "" msgid "Use beam interlocking" msgstr "" msgid "Generate interlocking beam structure at the locations where different filaments touch. This improves the adhesion between filaments, especially models printed in different materials." msgstr "" msgid "Interlocking beam width" msgstr "" msgid "The width of the interlocking structure beams." msgstr "" msgid "Interlocking direction" msgstr "" msgid "Orientation of interlock beams." msgstr "" msgid "Interlocking beam layers" msgstr "" msgid "The height of the beams of the interlocking structure, measured in number of layers. Less layers is stronger, but more prone to defects." msgstr "" msgid "Interlocking depth" msgstr "" msgid "The distance from the boundary between filaments to generate interlocking structure, measured in cells. Too few cells will result in poor adhesion." msgstr "" msgid "Interlocking boundary avoidance" msgstr "" msgid "The distance from the outside of a model where interlocking structures will not be generated, measured in cells." msgstr "" msgid "Ironing Type" msgstr "" msgid "Ironing is using small flow to print on same height of surface again to make flat surface more smooth. This setting controls which layer being ironed" msgstr "" msgid "No ironing" msgstr "" msgid "All solid layer" msgstr "" msgid "Ironing Pattern" msgstr "" msgid "Ironing flow" msgstr "" msgid "The amount of material to extrude during ironing. Relative to flow of normal layer height. Too high value results in overextrusion on the surface" msgstr "" msgid "Ironing line spacing" msgstr "" msgid "The distance between the lines of ironing" msgstr "" msgid "Ironing inset" msgstr "" msgid "The distance to keep the from the edges of ironing line. 0 means not apply." msgstr "" msgid "Ironing speed" msgstr "" msgid "Print speed of ironing lines" msgstr "" msgid "ironing direction" msgstr "" msgid "Angle for ironing, which controls the relative angle between the top surface and ironing" msgstr "" msgid "This gcode part is inserted at every layer change after lift z" msgstr "" msgid "Clumping detection G-code" msgstr "" msgid "Supports silent mode" msgstr "" msgid "Whether the machine supports silent mode in which machine use lower acceleration to print" msgstr "" msgid "This G-code will be used as a code for the pause print. User can insert pause G-code in gcode viewer" msgstr "" msgid "This G-code will be used as a custom code" msgstr "" msgid "Maximum speed X" msgstr "" msgid "Maximum speed Y" msgstr "" msgid "Maximum speed Z" msgstr "" msgid "Maximum speed E" msgstr "" msgid "Machine limits" msgstr "" msgid "Maximum X speed" msgstr "" msgid "Maximum Y speed" msgstr "" msgid "Maximum Z speed" msgstr "" msgid "Maximum E speed" msgstr "" msgid "Maximum acceleration X" msgstr "" msgid "Maximum acceleration Y" msgstr "" msgid "Maximum acceleration Z" msgstr "" msgid "Maximum acceleration E" msgstr "" msgid "Maximum acceleration of the X axis" msgstr "" msgid "Maximum acceleration of the Y axis" msgstr "" msgid "Maximum acceleration of the Z axis" msgstr "" msgid "Maximum acceleration of the E axis" msgstr "" msgid "Maximum jerk X" msgstr "" msgid "Maximum jerk Y" msgstr "" msgid "Maximum jerk Z" msgstr "" msgid "Maximum jerk E" msgstr "" msgid "Maximum jerk of the X axis" msgstr "" msgid "Maximum jerk of the Y axis" msgstr "" msgid "Maximum jerk of the Z axis" msgstr "" msgid "Maximum jerk of the E axis" msgstr "" msgid "Minimum speed for extruding" msgstr "" msgid "Minimum speed for extruding (M205 S)" msgstr "" msgid "Minimum travel speed" msgstr "" msgid "Minimum travel speed (M205 T)" msgstr "" msgid "Maximum acceleration for extruding" msgstr "" msgid "Maximum acceleration for extruding (M204 P)" msgstr "" msgid "Maximum acceleration for retracting" msgstr "" msgid "Maximum acceleration for retracting (M204 R)" msgstr "" msgid "Maximum acceleration for travel" msgstr "" msgid "Maximum acceleration for travel (M204 T)" msgstr "" msgid "Part cooling fan speed may be increased when auto cooling is enabled. This is the maximum speed limitation of part cooling fan" msgstr "" msgid "Max" msgstr "" msgid "The largest printable layer height for extruder. Used to limit the maximum layer height when enable adaptive layer height" msgstr "" msgid "Minimum speed for part cooling fan" msgstr "" msgid "Speed of auxiliary part cooling fan. Auxiliary fan will run at this speed during printing except the first several layers which are defined by no cooling layers" msgstr "" msgid "Min" msgstr "" msgid "The lowest printable layer height for extruder. Used to limit the minimum layer height when enable adaptive layer height" msgstr "" msgid "Min print speed" msgstr "" msgid "The minimum printing speed when slow down for cooling" msgstr "" msgid "Nozzle diameter" msgstr "" msgid "Diameter of nozzle" msgstr "" msgid "Host Type" msgstr "" msgid "Slic3r can upload G-code files to a printer host. This field must contain the kind of the host." msgstr "" msgid "Nozzle volume" msgstr "" msgid "Volume of nozzle between the cutter and the end of nozzle" msgstr "" msgid "Start end points" msgstr "" msgid "The start and end points which are from cutter area to garbage can." msgstr "" msgid "Reduce infill retraction" msgstr "" msgid "Don't retract when the travel is in infill area absolutely. That means the oozing can't been seen. This can reduce times of retraction for complex model and save printing time, but make slicing and G-code generating slower" msgstr "" msgid "Filename format" msgstr "" msgid "User can self-define the project file name when export" msgstr "" msgid "Detect overhang wall" msgstr "" msgid "Detect the overhang percentage relative to line width and use different speed to print. For 100 percent overhang, bridge speed is used." msgstr "" msgid "Smooth speed discontinuity area" msgstr "" msgid "Add the speed transition between discontinuity area." msgstr "" msgid "Smooth coefficient" msgstr "" msgid "The smaller the number, the longer the speed transition path. 0 means not apply." msgstr "" msgid "Walls filament" msgstr "" msgid "Filament to print walls" msgstr "" msgid "Line width of inner wall" msgstr "" msgid "Speed of inner wall" msgstr "" msgid "Number of walls of every layer" msgstr "" msgid "Embedding the wall into the infill" msgstr "" msgid "Embedding the wall into parts where the wall loops are absent ensures that the wall connects seamlessly to the infill." msgstr "" msgid "Post-processing Scripts" msgstr "" msgid "If you want to process the output G-code through custom scripts, just list their absolute paths here. Separate multiple scripts with a semicolon. Scripts will be passed the absolute path to the G-code file as the first argument, and variables of settings also can be read" msgstr "" msgid "Raft contact Z distance" msgstr "" msgid "Z gap between object and raft. Ignored for soluble interface" msgstr "" msgid "Raft expansion" msgstr "" msgid "Expand all raft layers in XY plane" msgstr "" msgid "Initial layer density" msgstr "" msgid "Density of the first raft or support layer" msgstr "" msgid "Initial layer expansion" msgstr "" msgid "Expand the first raft or support layer to improve bed plate adhesion, -1 means auto" msgstr "" msgid "Raft layers" msgstr "" msgid "Object will be raised by this number of support layers. Use this function to avoid warping when print ABS" msgstr "" msgid "G-code path is generated after simplifying the contour of model to avoid too many points and gcode lines in the gcode file. Smaller value means higher resolution and more time to slice" msgstr "" msgid "Travel distance threshold" msgstr "" msgid "Only trigger retraction when the travel distance is longer than this threshold" msgstr "" msgid "Retract amount before wipe" msgstr "" msgid "The length of fast retraction before wipe, relative to retraction length" msgstr "" msgid "Retract when change layer" msgstr "" msgid "Force a retraction when changes layer" msgstr "" msgid "Retraction Length" msgstr "" msgid "Some amount of material in extruder is pulled back to avoid ooze during long travel. Set zero to disable retraction" msgstr "" msgid "Long retraction when cut(experimental)" msgstr "" msgid "Experimental feature.Retracting and cutting off the filament at a longer distance during changes to minimize purge.While this reduces flush significantly, it may also raise the risk of nozzle clogs or other printing problems." msgstr "" msgid "Retraction distance when cut" msgstr "" msgid "Experimental feature.Retraction length before cutting off during filament change" msgstr "" msgid "Long retraction when extruder change" msgstr "" msgid "Retraction distance when extruder change" msgstr "" msgid "Z hop when retract" msgstr "" msgid "Whenever the retraction is done, the nozzle is lifted a little to create clearance between nozzle and the print. It prevents nozzle from hitting the print when travel moves. Using spiral line to lift z can prevent stringing" msgstr "" msgid "Z hop lower boundary" msgstr "" msgid "Z hop will only come into effect when Z is above this value and is below the parameter: \"Z hop upper boundary\"" msgstr "" msgid "Z hop upper boundary" msgstr "" msgid "If this value is positive, Z hop will only come into effect when Z is above the parameter: \"Z hop lower boundary\" and is below this value" msgstr "" msgid "Z Hop Type" msgstr "" msgid "Slope" msgstr "" msgid "Spiral" msgstr "" msgid "Direct Drive" msgstr "" msgid "Bowden" msgstr "" msgid "Nozzle Volume Type" msgstr "" msgid "Hybrid" msgstr "" msgid "Default Nozzle Volume Type" msgstr "" msgid "Saving" msgstr "" msgid "length when change hotend" msgstr "" msgid "When this retraction value is modified, it will be used as the amount of filament retracted inside the hotend before changing hotends." msgstr "" msgid "Extra length on restart" msgstr "" msgid "When the retraction is compensated after the travel move, the extruder will push this additional amount of filament. This setting is rarely needed." msgstr "" msgid "When the retraction is compensated after changing tool, the extruder will push this additional amount of filament." msgstr "" msgid "Retraction Speed" msgstr "" msgid "Speed of retractions" msgstr "" msgid "Deretraction Speed" msgstr "" msgid "Speed for reloading filament into extruder. Zero means the same speed as retraction" msgstr "" msgid "Seam position" msgstr "" msgid "The start position to print each part of outer wall" msgstr "" msgid "Nearest" msgstr "" msgid "Aligned" msgstr "" msgid "Back" msgstr "" msgid "Random" msgstr "" msgid "Seam placement away from overhangs(experimental)" msgstr "" msgid "Ensure seam placement away from overhangs for alignment and backing modes." msgstr "" msgid "Seam gap" msgstr "" msgid "" "In order to reduce the visibility of the seam in a closed loop extrusion, the loop is interrupted and shortened by a specified amount.\n" "This amount as a percentage of the current extruder diameter. The default value for this parameter is 15" msgstr "" msgid "Smart scarf seam application" msgstr "" msgid "Apply scarf joints only to smooth perimeters where traditional seams do not conceal the seams at sharp corners effectively." msgstr "" msgid "Scarf application angle threshold" msgstr "" msgid "" "This option sets the threshold angle for applying a conditional scarf joint seam.\n" "If the seam angle within the perimeter loop exceeds this value (indicating the absence of sharp corners), a scarf joint seam will be used. The default value is 155°." msgstr "" msgid "Scarf around entire wall" msgstr "" msgid "The scarf extends to the entire length of the wall." msgstr "" msgid "Scarf steps" msgstr "" msgid "Minimum number of segments of each scarf." msgstr "" msgid "Scarf joint for inner walls" msgstr "" msgid "Use scarf joint for inner walls as well." msgstr "" msgid "Override filament scarf seam setting" msgstr "" msgid "Overrider filament scarf seam setting and could control settings by modifier." msgstr "" msgid "Wipe speed" msgstr "" msgid "The wipe speed is determined by the speed setting specified in this configuration.If the value is expressed as a percentage (e.g. 80%), it will be calculated based on the travel speed setting above.The default value for this parameter is 80%" msgstr "" msgid "Role-based wipe speed" msgstr "" msgid "The wipe speed is determined by speed of current extrusion role. e.g if a wipe action is executed immediately following an outer wall extrusion, the speed of the outer wall extrusion will be utilized for the wipe action." msgstr "" msgid "Skirt distance" msgstr "" msgid "Distance from skirt to brim or object" msgstr "" msgid "Skirt height" msgstr "" msgid "How many layers of skirt. Usually only one layer" msgstr "" msgid "Skirt loops" msgstr "" msgid "Number of loops for the skirt. Zero means disabling skirt" msgstr "" msgid "The printing speed in exported gcode will be slowed down, when the estimated layer time is shorter than this value, to get better cooling for these layers" msgstr "" msgid "Minimum sparse infill threshold" msgstr "" msgid "Sparse infill area which is smaller than threshold value is replaced by internal solid infill" msgstr "" msgid "mm²" msgstr "" msgid "Solid infill filament" msgstr "" msgid "Filament to print solid infill" msgstr "" msgid "Line width of internal solid infill" msgstr "" msgid "Speed of internal solid infill, not the top and bottom surface" msgstr "" msgid "Spiralize smooths out the z moves of the outer contour. And turns a solid model into a single walled print with solid bottom layers. The final generated model has no seam" msgstr "" msgid "Smooth Spiral" msgstr "" msgid "Smooth Spiral smoothes out X and Y moves as wellresulting in no visible seam at all, even in the XY directions on walls that are not vertical" msgstr "" msgid "Max XY Smoothing" msgstr "" msgid "Maximum distance to move points in XY to try to achieve a smooth spiralIf expressed as a %, it will be computed over nozzle diameter" msgstr "" msgid "If smooth or traditional mode is selected, a timelapse video will be generated for each print. After each layer is printed, a snapshot is taken with the chamber camera. All of these snapshots are composed into a timelapse video when printing completes. If smooth mode is selected, the toolhead will move to the excess chute after each layer is printed and then take a snapshot. Since the melt filament may leak from the nozzle during the process of taking a snapshot, prime tower is required for smooth mode to wipe nozzle." msgstr "" msgid "Traditional" msgstr "" msgid "Temperature variation" msgstr "" msgid "Start G-code" msgstr "" msgid "Start G-code when start the whole printing" msgstr "" msgid "Start G-code when start the printing of this filament" msgstr "" msgid "Slice gap closing radius" msgstr "" msgid "Cracks smaller than 2x gap closing radius are being filled during the triangle mesh slicing. The gap closing operation may reduce the final print resolution, therefore it is advisable to keep the value reasonably low." msgstr "" msgid "Slicing Mode" msgstr "" msgid "Use \"Even-odd\" for 3DLabPrint airplane models. Use \"Close holes\" to close all holes in the model." msgstr "" msgid "Regular" msgstr "" msgid "Even-odd" msgstr "" msgid "Close holes" msgstr "" msgid "Enable support" msgstr "" msgid "Enable support generation." msgstr "" msgid "normal(auto) and tree(auto) is used to generate support automatically. If normal(manual) or tree(manual) is selected, only support enforcers are generated" msgstr "" msgid "normal(auto)" msgstr "" msgid "tree(auto)" msgstr "" msgid "normal(manual)" msgstr "" msgid "tree(manual)" msgstr "" msgid "Support/object xy distance" msgstr "" msgid "XY separation between an object and its support" msgstr "" msgid "Support/object first layer gap" msgstr "" msgid "XY separation between an object and its support at the first layer." msgstr "" msgid "Pattern angle" msgstr "" msgid "Use this setting to rotate the support pattern on the horizontal plane." msgstr "" msgid "On build plate only" msgstr "" msgid "Don't create support on model surface, only on build plate" msgstr "" msgid "Support critical regions only" msgstr "" msgid "Only create support for critical regions including sharp tail, cantilever, etc." msgstr "" msgid "Remove small overhangs" msgstr "" msgid "Remove small overhangs that possibly need no supports." msgstr "" msgid "Top Z distance" msgstr "" msgid "The z gap between the top support interface and object" msgstr "" msgid "Bottom Z distance" msgstr "" msgid "The z gap between the bottom support interface and object" msgstr "" msgid "Support/raft base" msgstr "" msgid "Filament to print support base and raft. \"Default\" means no specific filament for support and current filament is used" msgstr "" msgid "Avoid interface filament for base" msgstr "" msgid "Avoid using support interface filament to print support base if possible." msgstr "" msgid "Line width of support" msgstr "" msgid "Interface use loop pattern" msgstr "" msgid "Cover the top contact layer of the supports with loops. Disabled by default." msgstr "" msgid "Support/raft interface" msgstr "" msgid "Filament to print support interface. \"Default\" means no specific filament for support interface and current filament is used" msgstr "" msgid "Top interface layers" msgstr "" msgid "Number of top interface layers" msgstr "" msgid "Bottom interface layers" msgstr "" msgid "Number of bottom interface layers" msgstr "" msgid "Same as top" msgstr "" msgid "Top interface spacing" msgstr "" msgid "Spacing of interface lines. Zero means solid interface" msgstr "" msgid "Bottom interface spacing" msgstr "" msgid "Spacing of bottom interface lines. Zero means solid interface" msgstr "" msgid "Speed of support interface" msgstr "" msgid "Base pattern" msgstr "" msgid "Line pattern of support" msgstr "" msgid "Rectilinear grid" msgstr "" msgid "Hollow" msgstr "" msgid "Interface pattern" msgstr "" msgid "Line pattern of support interface. Default pattern for support interface is Rectilinear Interlaced" msgstr "" msgid "Rectilinear Interlaced" msgstr "" msgid "Base pattern spacing" msgstr "" msgid "Spacing between support lines" msgstr "" msgid "Normal Support expansion" msgstr "" msgid "Expand (+) or shrink (-) the horizontal span of normal support" msgstr "" msgid "Speed of support" msgstr "" msgid "" "Style and shape of the support. For normal support, projecting the supports into a regular grid will create more stable supports (default), while snug support towers will save material and reduce object scarring.\n" "For tree support, slim style will merge branches more aggressively and save a lot of material, strong style will make larger and stronger support structure and use more materials, while hybrid style is the combination of slim tree and normal support with normal nodes under large flat overhangs. Organic style will produce more organic shaped tree structure and less interfaces which makes it easer to be removed. The default style is organic tree for most cases, and hybrid tree if adaptive layer height or soluble interface is enabled." msgstr "" msgid "Snug" msgstr "" msgid "Tree Slim" msgstr "" msgid "Tree Strong" msgstr "" msgid "Tree Hybrid" msgstr "" msgid "Tree Organic" msgstr "" msgid "Z overrides X/Y" msgstr "" msgid "When top z distance overrides support/object xy distance, give priority to ensuring that supports are generated beneath overhangs, and a gap of the same size as top z distance is leaved with the model. Whereas in the opposite case, the gap between supports and the model follows support/object xy distance all the time. Only recommended to enable when using HybridTree." msgstr "" msgid "Independent support layer height" msgstr "" msgid "Support layer uses layer height independent with object layer. This is to support customizing z-gap and save print time.This option will be invalid when the prime tower is enabled." msgstr "" msgid "Threshold angle" msgstr "" msgid "Support will be generated for overhangs whose slope angle is below the threshold." msgstr "" msgid "Branch angle" msgstr "" msgid "This setting determines the maximum overhang angle that t he branches of tree support allowed to make.If the angle is increased, the branches can be printed more horizontally, allowing them to reach farther." msgstr "" msgid "Branch distance" msgstr "" msgid "This setting determines the distance between neighboring tree support nodes." msgstr "" msgid "Branch diameter" msgstr "" msgid "This setting determines the initial diameter of support nodes." msgstr "" msgid "Branch diameter angle" msgstr "" msgid "The angle of the branches' diameter as they gradually become thicker towards the bottom. An angle of 0 will cause the branches to have uniform thickness over their length. A bit of an angle can increase stability of the tree support." msgstr "" msgid "Support wall loops" msgstr "" msgid "This setting specifies the count of support walls in the range of [-1,2]. -1 means auto, and 0 means allowing infill-only mode where support is thick enough." msgstr "" msgid "Chamber temperature" msgstr "" msgid "Higher chamber temperature can help suppress or reduce warping and potentially lead to higher interlayer bonding strength for high temperature materials like ABS, ASA, PC, PA and so on.At the same time, the air filtration of ABS and ASA will get worse.While for PLA, PETG, TPU, PVA and other low temperature materials,the actual chamber temperature should not be high to avoid cloggings, so 0 which stands for turning off is highly recommended" msgstr "" msgid "Nozzle temperature for layers after the initial one" msgstr "" msgid "Impact Strength Z" msgstr "" msgid "Detect thin wall" msgstr "" msgid "Detect thin wall which can't contain two line width. And use single line to print. Maybe printed not very well, because it's not closed loop" msgstr "" msgid "This gcode is inserted when change filament, including T command to trigger tool change" msgstr "" msgid "Line width for top surfaces" msgstr "" msgid "Speed of top surface infill which is solid" msgstr "" msgid "Top shell layers" msgstr "" msgid "This is the number of solid layers of top shell, including the top surface layer. When the thickness calculated by this value is thinner than top shell thickness, the top shell layers will be increased" msgstr "" msgid "Top solid layers" msgstr "" msgid "Top shell thickness" msgstr "" msgid "The number of top solid layers is increased when slicing if the thickness calculated by top shell layers is thinner than this value. This can avoid having too thin shell when layer height is small. 0 means that this setting is disabled and thickness of top shell is absolutely determained by top shell layers" msgstr "" msgid "Top paint penetration layers" msgstr "" msgid "This is the number of layers of top paint penetration." msgstr "" msgid "Bottom paint penetration layers" msgstr "" msgid "This is the number of layers of top bottom penetration." msgstr "" msgid "Use infill instead of top and bottom surfaces" msgstr "" msgid "Using infill instead of top and bottom surfaces." msgstr "" msgid "Speed of travel which is faster and without extrusion" msgstr "" msgid "Use relative E distances" msgstr "" msgid "If your firmware requires relative E values, check this, otherwise leave it unchecked. Must use relative e distance for QIDI printer" msgstr "" msgid "Use firmware retraction" msgstr "" msgid "Convert the retraction moves to G10 and G11 gcode" msgstr "" msgid "Wipe while retracting" msgstr "" msgid "Move nozzle along the last extrusion path when retracting to clean leaked material on nozzle. This can minimize blob when printing new part after travel" msgstr "" msgid "Wipe Distance" msgstr "" msgid "Describe how long the nozzle will move along the last path when retracting" msgstr "" msgid "The wiping tower can be used to clean up the residue on the nozzle and stabilize the chamber pressure inside the nozzle, in order to avoid appearance defects when printing objects." msgstr "" msgid "Internal ribs" msgstr "" msgid "Enable internal ribs to increase the stability of the prime tower." msgstr "" msgid "Auto circle contour-hole compensation" msgstr "" msgid "Expirment feature to compensate the circle holes and circle contour. This feature is used to improve the accuracy of the circle holes and contour within the diameter below 50mm. Only support PLA Basic, PLA CF, PET CF, PETG CF and PETG HF." msgstr "" msgid "User Customized Offset" msgstr "" msgid "If you want to have tighter or looser assemble, you can set this value. When it is positive, it indicates tightening, otherwise, it indicates loosening" msgstr "" msgid "Scarf Seam On Compensation Circles" msgstr "" msgid "Scarf seam will be applied on circles for better dimensional accuracy." msgstr "" msgid "Circle Compensation Speed" msgstr "" msgid "circle_compensation_speed" msgstr "" msgid "Counter Coef 1" msgstr "" msgid "counter_coef_1" msgstr "" msgid "Contour Coef 2" msgstr "" msgid "counter_coef_2" msgstr "" msgid "Contour Coef 3" msgstr "" msgid "counter_coef_3" msgstr "" msgid "Hole Coef 1" msgstr "" msgid "hole_coef_1" msgstr "" msgid "Hole Coef 2" msgstr "" msgid "hole_coef_2" msgstr "" msgid "Hole Coef 3" msgstr "" msgid "hole_coef_3" msgstr "" msgid "Contour limit min" msgstr "" msgid "counter_limit_min" msgstr "" msgid "Contour limit max" msgstr "" msgid "counter_limit_max" msgstr "" msgid "Hole limit min" msgstr "" msgid "hole_limit_min" msgstr "" msgid "Hole limit max" msgstr "" msgid "hole_limit_max" msgstr "" msgid "Diameter limit" msgstr "" msgid "diameter_limit" msgstr "" msgid "Purging volumes" msgstr "" msgid "Flush multiplier" msgstr "" msgid "The actual flushing volumes is equal to the flush multiplier multiplied by the flushing volumes in the table." msgstr "" msgid "Width of prime tower" msgstr "" msgid "Max speed" msgstr "" msgid "The maximum printing speed on the prime tower excluding ramming." msgstr "" msgid "Brim width of prime tower, negative number means auto calculated width based on the height of prime tower." msgstr "" msgid "Extra rib length" msgstr "" msgid "Positive values can increase the size of the rib wall, while negative values can reduce the size.However, the size of the rib wall can not be smaller than that determined by the cleaning volume." msgstr "" msgid "Rib width" msgstr "" msgid "Rib width is always less than half the prime tower side length." msgstr "" msgid "Skip points" msgstr "" msgid "The wall of prime tower will skip the start points of wipe path" msgstr "" msgid "Rib wall" msgstr "" msgid "The wall of prime tower will add four ribs and make its cross-section as close to a square as possible, so the width will be fixed." msgstr "" msgid "Fillet wall" msgstr "" msgid "The wall of prime tower will fillet" msgstr "" msgid "Infill gap" msgstr "" msgid "Purging after filament change will be done inside objects' infills. This may lower the amount of waste and decrease the print time. If the walls are printed with transparent filament, the mixed color infill will be seen outside. It will not take effect, unless the prime tower is enabled." msgstr "" msgid "Purging after filament change will be done inside objects' support. This may lower the amount of waste and decrease the print time. It will not take effect, unless the prime tower is enabled." msgstr "" msgid "This object will be used to purge the nozzle after a filament change to save filament and decrease the print time. Colours of the objects will be mixed as a result. It will not take effect, unless the prime tower is enabled." msgstr "" msgid "X-Y hole compensation" msgstr "" msgid "Holes of object will be grown or shrunk in XY plane by the configured value. Positive value makes holes bigger. Negative value makes holes smaller. This function is used to adjust size slightly when the object has assembling issue" msgstr "" msgid "X-Y contour compensation" msgstr "" msgid "Contour of object will be grown or shrunk in XY plane by the configured value. Positive value makes contour bigger. Negative value makes contour smaller. This function is used to adjust size slightly when the object has assembling issue" msgstr "" msgid "Classic wall generator produces walls with constant extrusion width and for very thin areas is used gap-fill. Arachne engine produces walls with variable extrusion width" msgstr "" msgid "Classic" msgstr "" msgid "Arachne" msgstr "" msgid "Wall transition length" msgstr "" msgid "When transitioning between different numbers of walls as the part becomes thinner, a certain amount of space is allotted to split or join the wall segments. It's expressed as a percentage over nozzle diameter" msgstr "" msgid "Wall transitioning filter margin" msgstr "" msgid "Prevent transitioning back and forth between one extra wall and one less. This margin extends the range of extrusion widths which follow to [Minimum wall width - margin, 2 * Minimum wall width + margin]. Increasing this margin reduces the number of transitions, which reduces the number of extrusion starts/stops and travel time. However, large extrusion width variation can lead to under- or overextrusion problems. It's expressed as a percentage over nozzle diameter" msgstr "" msgid "Wall transitioning threshold angle" msgstr "" msgid "When to create transitions between even and odd numbers of walls. A wedge shape with an angle greater than this setting will not have transitions and no walls will be printed in the center to fill the remaining space. Reducing this setting reduces the number and length of these center walls, but may leave gaps or overextrude" msgstr "" msgid "Wall distribution count" msgstr "" msgid "The number of walls, counted from the center, over which the variation needs to be spread. Lower values mean that the outer walls don't change in width" msgstr "" msgid "Minimum feature size" msgstr "" msgid "Minimum thickness of thin features. Model features that are thinner than this value will not be printed, while features thicker than the Minimum feature size will be widened to the Minimum wall width. It's expressed as a percentage over nozzle diameter" msgstr "" msgid "Minimum wall width" msgstr "" msgid "Width of the wall that will replace thin features (according to the Minimum feature size) of the model. If the Minimum wall width is thinner than the thickness of the feature, the wall will become as thick as the feature itself. It's expressed as a percentage over nozzle diameter" msgstr "" msgid "Detect narrow internal solid infill" msgstr "" msgid "This option will auto detect narrow internal solid infill area. If enabled, concentric pattern will be used for the area to speed printing up. Otherwise, rectilinear pattern is used defaultly." msgstr "" msgid "invalid value " msgstr "" msgid "--use-firmware-retraction is only supported by Marlin, Klipper, Smoothie, RepRapFirmware, Repetier and Machinekit firmware" msgstr "" msgid "--use-firmware-retraction is not compatible with --wipe" msgstr "" #, possible-c-format, possible-boost-format msgid " doesn't work at 100%% density " msgstr "" msgid "Invalid value when spiral vase mode is enabled: " msgstr "" msgid "too large line width " msgstr "" msgid " not in range " msgstr "" msgid "No check" msgstr "" msgid "Do not run any validity checks, such as gcode path conflicts check." msgstr "" msgid "Error in zip archive" msgstr "" msgid "Generating walls" msgstr "" msgid "Generating infill regions" msgstr "" msgid "Generating infill toolpath" msgstr "" msgid "Detect overhangs for auto-lift" msgstr "" msgid "Checking support necessity" msgstr "" msgid "floating regions" msgstr "" msgid "floating cantilever" msgstr "" msgid "large overhangs" msgstr "" #, possible-c-format, possible-boost-format msgid "It seems object %s has %s. Please re-orient the object or enable support generation." msgstr "" msgid "Generating support" msgstr "" msgid "Optimizing toolpath" msgstr "" msgid "Empty layers around bottom are replaced by nearest normal layers." msgstr "" msgid "The model has too many empty layers." msgstr "" msgid "Slicing mesh" msgstr "" msgid "No layers were detected. You might want to repair your STL file(s) or check their size or thickness and retry.\n" msgstr "" msgid "" "An object's XY size compensation will not be used because it is also color-painted.\n" "XY Size compensation can not be combined with color-painting." msgstr "" msgid "" "An object has enabled XY Size compensation which will not be used because it is also fuzzy skin painted.\n" "XY Size compensation cannot be combined with fuzzy skin painting." msgstr "" msgid "Object name" msgstr "" msgid "Loading of a model file failed." msgstr "" msgid "Meshing of a model file failed or no valid shape." msgstr "" msgid "The supplied file couldn't be read because it's empty" msgstr "" msgid "Unknown file format. Input file must have .stl, .obj, .amf(.xml) extension." msgstr "" msgid "Unknown file format. Input file must have .3mf or .zip.amf extension." msgstr "" msgid "Canceled" msgstr "" msgid "load_obj: failed to parse" msgstr "" msgid "load mtl in obj: failed to parse" msgstr "" msgid "The file contains polygons with more than 4 vertices." msgstr "" msgid "The file contains polygons with less than 2 vertices." msgstr "" msgid "The file contains invalid vertex index." msgstr "" msgid "This OBJ file couldn't be read because it's empty." msgstr "" msgid "Flow Rate Calibration" msgstr "" msgid "Max Volumetric Speed Calibration" msgstr "" msgid "Manage Result" msgstr "" msgid "Manual Calibration" msgstr "" msgid "Result can be read by human eyes." msgstr "" msgid "Auto-Calibration" msgstr "" msgid "The printer will automatically read the calibration results." msgstr "" msgid "Prev" msgstr "" msgid "Recalibration" msgstr "" msgid "Calibrate" msgstr "" msgid "Finish" msgstr "" msgid "How to use calibration result?" msgstr "" msgid "You could change the Flow Dynamics Calibration Factor in material editing" msgstr "" msgid "" "The current firmware version of the printer does not support calibration.\n" "Please upgrade the printer firmware." msgstr "" msgid "Calibration not supported" msgstr "" msgid "Error desc" msgstr "" msgid "Extra info" msgstr "" msgid "Flow Dynamics" msgstr "" msgid "Flow Rate" msgstr "" msgid "The name cannot be empty." msgstr "" #, possible-c-format, possible-boost-format msgid "The selected preset: %s is not found." msgstr "" msgid "The name cannot be the same as the system preset name." msgstr "" msgid "The name is the same as another existing preset name" msgstr "" msgid "create new preset failed." msgstr "" #, possible-c-format, possible-boost-format msgid "Could not find parameter: %s." msgstr "" msgid "Are you sure to cancel the current calibration and return to the home page?" msgstr "" msgid "No Printer Connected!" msgstr "" msgid "Printer is not connected yet." msgstr "" msgid "Please select filament to calibrate." msgstr "" msgid "The input value size must be 3." msgstr "" msgid "" "This machine type can only hold 16 history results per nozzle. You can delete the existing historical results and then start calibration. Or you can continue the calibration, but you cannot create new calibration historical results. \n" "Do you still want to continue the calibration?" msgstr "" #, possible-c-format, possible-boost-format msgid "Only one of the results with the same name: %s will be saved. Are you sure you want to override the other results?" msgstr "" #, possible-c-format, possible-boost-format msgid "There is already a historical calibration result with the same name: %s. Only one of the results with the same name is saved. Are you sure you want to override the historical result?" msgstr "" #, possible-c-format, possible-boost-format msgid "" "Within the same extruder, the name(%s) must be unique when the filament type, nozzle diameter, and nozzle flow are the same.\n" "Are you sure you want to override the historical result?" msgstr "" #, possible-c-format, possible-boost-format msgid "This machine type can only hold %d history results per nozzle. This result will not be saved." msgstr "" msgid "Connecting to printer..." msgstr "" msgid "The failed test result has been dropped." msgstr "" msgid "Flow Dynamics Calibration result has been saved to the printer" msgstr "" msgid "Internal Error" msgstr "" msgid "Please select at least one filament for calibration" msgstr "" msgid "Flow rate calibration result has been saved to preset" msgstr "" msgid "Max volumetric speed calibration result has been saved to preset" msgstr "" msgid "When do you need Flow Dynamics Calibration" msgstr "" msgid "" "We now have added the auto-calibration for different filaments, which is fully automated and the result will be saved into the printer for future use. You only need to do the calibration in the following limited cases:\n" "1. If you introduce a new filament of different brands/models or the filament is damp;\n" "2. if the nozzle is worn out or replaced with a new one;\n" "3. If the max volumetric speed or print temperature is changed in the filament setting." msgstr "" msgid "About this calibration" msgstr "" msgid "" "Please find the details of Flow Dynamics Calibration from our wiki.\n" "\n" "Usually the calibration is unnecessary. When you start a single color/material print, with the \"flow dynamics calibration\" option checked in the print start menu, the printer will follow the old way, calibrate the filament before the print; When you start a multi color/material print, the printer will use the default compensation parameter for the filament during every filament switch which will have a good result in most cases.\n" "\n" "Please note that there are a few cases that can make the calibration results unreliable, such as insufficient adhesion on the build plate. Improving adhesion can be achieved by washing the build plate or applying glue. For more information on this topic, please refer to our Wiki.\n" "\n" "The calibration results have about 10 percent jitter in our test, which may cause the result not exactly the same in each calibration. We are still investigating the root cause to do improvements with new updates." msgstr "" msgid "When to use Flow Rate Calibration" msgstr "" msgid "" "After using Flow Dynamics Calibration, there might still be some extrusion issues, such as:\n" "1. Over-Extrusion: Excess material on your printed object, forming blobs or zits, or the layers seem thicker than expected and not uniform.\n" "2. Under-Extrusion: Very thin layers, weak infill strength, or gaps in the top layer of the model, even when printing slowly.\n" "3. Poor Surface Quality: The surface of your prints seems rough or uneven.\n" "4. Weak Structural Integrity: Prints break easily or don't seem as sturdy as they should be." msgstr "" msgid "In addition, Flow Rate Calibration is crucial for foaming materials like LW-PLA used in RC planes. These materials expand greatly when heated, and calibration provides a useful reference flow rate." msgstr "" msgid "Flow Rate Calibration measures the ratio of expected to actual extrusion volumes. The default setting works well in QIDI Tech printers and official filaments as they were pre-calibrated and fine-tuned. For a regular filament, you usually won't need to perform a Flow Rate Calibration unless you still see the listed defects after you have done other calibrations. For more details, please check out the wiki article." msgstr "" msgid "" "Auto Flow Rate Calibration utilizes QIDI Tech's Micro-Lidar technology, directly measuring the calibration patterns. However, please be advised that the efficacy and accuracy of this method may be compromised with specific types of materials. Particularly, filaments that are transparent or semi-transparent, sparkling-particled, or have a high-reflective finish may not be suitable for this calibration and can produce less-than-desirable results.\n" "\n" "The calibration results may vary between each calibration or filament. We are still improving the accuracy and compatibility of this calibration through firmware updates over time.\n" "\n" "Caution: Flow Rate Calibration is an advanced process, to be attempted only by those who fully understand its purpose and implications. Incorrect usage can lead to sub-par prints or printer damage. Please make sure to carefully read and understand the process before doing it." msgstr "" msgid "When you need Max Volumetric Speed Calibration" msgstr "" msgid "Over-extrusion or under extrusion" msgstr "" msgid "Max Volumetric Speed calibration is recommended when you print with:" msgstr "" msgid "material with significant thermal shrinkage/expansion, such as..." msgstr "" msgid "materials with inaccurate filament diameter" msgstr "" msgid "We found the best Flow Dynamics Calibration Factor" msgstr "" msgid "Part of the calibration failed! You may clean the plate and retry. The failed test result would be dropped." msgstr "" msgid "*We recommend you to add brand, material, type, and even humidity level in the Name" msgstr "" msgid "Failed" msgstr "" msgid "Please enter the name you want to save to printer." msgstr "" msgid "The name cannot exceed 40 characters." msgstr "" msgid "Nozzle ID" msgstr "" msgid "Please find the best line on your plate" msgstr "" msgid "Please find the corner with perfect degree of extrusion" msgstr "" msgid "Input Value" msgstr "" msgid "Save to Filament Preset" msgstr "" msgid "Preset" msgstr "" msgid "Record Factor" msgstr "" msgid "We found the best flow ratio for you" msgstr "" msgid "Flow Ratio" msgstr "" msgid "Please input a valid value (0.0 < flow ratio < 2.0)" msgstr "" msgid "Please enter the name of the preset you want to save." msgstr "" msgid "Calibration1" msgstr "" msgid "Calibration2" msgstr "" msgid "Please find the best object on your plate" msgstr "" msgid "Fill in the value above the block with smoothest top surface" msgstr "" msgid "Skip Calibration2" msgstr "" #, possible-c-format, possible-boost-format msgid "flow ratio : %s " msgstr "" msgid "Please choose a block with smoothest top surface" msgstr "" msgid "Please choose a block with smoothest top surface." msgstr "" msgid "Please input a valid value (0 <= Max Volumetric Speed <= 60)" msgstr "" msgid "Calibration Type" msgstr "" msgid "Complete Calibration" msgstr "" msgid "Fine Calibration based on flow ratio" msgstr "" msgid "Title" msgstr "" msgid "A test model will be printed. Please clear the build plate and place it back to the hot bed before calibration." msgstr "" msgid "Printing Parameters" msgstr "" msgid "Synchronize nozzle and AMS information" msgstr "" msgid "Please connect the printer first before synchronizing." msgstr "" #, possible-c-format, possible-boost-format msgid "Printer %s nozzle information has not been set. Please configure it before proceeding with the calibration." msgstr "" msgid "AMS and nozzle information are synced" msgstr "" msgid "Nozzle Flow" msgstr "" msgid "Nozzle Info" msgstr "" msgid "Plate Type" msgstr "" msgid "filament position" msgstr "" msgid "Filament For Calibration" msgstr "" msgid "" "Tips for calibration material: \n" "- Materials that can share same hot bed temperature\n" "- Different filament brand and family(Brand = QIDI, Family = Basic, Matte)\n" msgstr "" msgid "- Note: The hotend's number is tied to the holder. When the hotend is moved to a new holder, its number will update automatically.\n" msgstr "" msgid "" "Tips for calibration material: \n" "- Materials that can share same hot bed temperature\n" "- Different filament brand and family(Brand = QIDI, Family = Basic, Matte)" msgstr "" msgid "Pattern" msgstr "" msgid "Method" msgstr "" #, possible-c-format, possible-boost-format msgid "" "Tip: Using a %.1fmm nozzle for auto dynamic flow calibration may have a high probability of failure.\n" "If it fails, it is recommended to use manual calibration." msgstr "" #, possible-c-format, possible-boost-format msgid "" "Tip: Using a %.1fmm nozzle for auto dynamic flow calibration may not get accurate calibration results.\n" "It is recommended to use manual calibration." msgstr "" #, possible-c-format, possible-boost-format msgid "%s is not compatible with %s" msgstr "" msgid "TPU is not supported for Flow Dynamics Auto-Calibration." msgstr "" msgid "Can not print multiple filaments which have large difference of temperature together. Otherwise, the extruder and nozzle may be blocked or damaged during printing" msgstr "" #, possible-c-format, possible-boost-format msgid "" "Tip: Calibrating foam filaments(%s) in X series printers may not get accurate results\n" "because their dynamic response is much different from that of ordinary filaments, and there is a high risk of oozing when printing calibration lines." msgstr "" #, possible-c-format, possible-boost-format msgid "" "Tip: When using the A1/A1 mini printer, we do not recommend calibrating foam filaments(%s),\n" "as the results may be unstable and affect print quality." msgstr "" msgid "Sync AMS and nozzle information" msgstr "" msgid "Connecting to printer" msgstr "" msgid "Calibration only supports cases where the left and right nozzle diameters are identical." msgstr "" msgid "From k Value" msgstr "" msgid "To k Value" msgstr "" msgid "Value step" msgstr "" msgid "The nozzle diameter has been synchronized from the printer Settings" msgstr "" msgid "From Volumetric Speed" msgstr "" msgid "To Volumetric Speed" msgstr "" msgid "Are you sure to stop printing?" msgstr "" msgid "Flow Dynamics Calibration Result" msgstr "" msgid "New" msgstr "" msgid "No History Result" msgstr "" msgid "Success to get history result" msgstr "" msgid "Refreshing the historical Flow Dynamics Calibration records" msgstr "" msgid "Action" msgstr "" #, possible-c-format, possible-boost-format msgid "This machine type can only hold %d history results per nozzle." msgstr "" msgid "Edit Flow Dynamics Calibration" msgstr "" #, possible-c-format, possible-boost-format msgid "Within the same extruder, the name '%s' must be unique when the filament type, nozzle diameter, and nozzle flow are identical. Please choose a different name." msgstr "" msgid "New Flow Dynamic Calibration" msgstr "" msgid "Ok" msgstr "" msgid "The filament must be selected." msgstr "" msgid "The extruder must be selected." msgstr "" msgid "The nozzle must be selected." msgstr "" msgid "PA Calibration" msgstr "" msgid "PA Tower" msgstr "" msgid "PA Line" msgstr "" msgid "PA Pattern" msgstr "" msgid "Start PA: " msgstr "" msgid "End PA: " msgstr "" msgid "PA step: " msgstr "" msgid "Print numbers" msgstr "" msgid "Temperature calibration" msgstr "" msgid "Filament type" msgstr "" msgid "Start temp: " msgstr "" msgid "End temp: " msgstr "" msgid "Temp step: " msgstr "" msgid "Supported range: 180°C - 350°C" msgstr "" msgid "" "Please input valid values:\n" "Start temp: <= 350\n" "End temp: >= 180\n" "Start temp >= End temp + 5)" msgstr "" msgid "Max volumetric speed test" msgstr "" msgid "Start volumetric speed: " msgstr "" msgid "End volumetric speed: " msgstr "" msgid "step: " msgstr "" msgid "" "Please input valid values:\n" "start > 0 step >= 0\n" "end >= start + step)" msgstr "" msgid "VFA test" msgstr "" msgid "Start speed: " msgstr "" msgid "End speed: " msgstr "" msgid "" "Please input valid values:\n" "start > 10 step >= 0\n" "end >= start + step)" msgstr "" msgid "Start retraction length: " msgstr "" msgid "End retraction length: " msgstr "" msgid "Network lookup" msgstr "" msgid "Address" msgstr "" msgid "Hostname" msgstr "" msgid "Service name" msgstr "" msgid "OctoPrint version" msgstr "" msgid "Searching for devices" msgstr "" msgid "Send to print" msgstr "" msgid "Upload to Printer Host with the following filename:" msgstr "" msgid "Use forward slashes ( / ) as a directory separator if needed." msgstr "" #, possible-c-format, possible-boost-format msgid "Upload filename doesn't end with \"%s\". Do you wish to continue?" msgstr "" msgid "Upload" msgstr "" msgid "Simulate" msgstr "" msgid "Print host upload queue" msgstr "" msgid "Progress" msgstr "" msgid "Host" msgstr "" msgctxt "OfFile" msgid "Size" msgstr "" msgid "Filename" msgstr "" msgid "Error Message" msgstr "" msgid "Cancel selected" msgstr "" msgid "Show error message" msgstr "" msgid "Enqueued" msgstr "" msgid "Uploading" msgstr "" msgid "Cancelling" msgstr "" msgid "Error uploading to print host:" msgstr "" msgid "Unable to perform boolean operation on selected parts." msgstr "" msgid "Operation Canceled." msgstr "" msgid "Operation Failed." msgstr "" msgid "Union operation requires at least two volumes." msgstr "" msgid "Intersection operation requires at least two volumes." msgstr "" msgid "Difference operation requires at least one volume in both A and B lists." msgstr "" msgid "Union operation requires at least two objects." msgstr "" msgid "Intersection operation requires at least two objects." msgstr "" msgid "Difference operation requires at least one object in both A and B lists." msgstr "" msgid "Failed to group parts by object. Please check for self-intersections, non-manifold geometry, or open meshes." msgstr "" msgid "No overlapping region found. Boolean intersection failed." msgstr "" msgid "Mesh preparation failed." msgstr "" msgid "Mesh Boolean" msgstr "" msgid "- Object mode: Please select at least two objects." msgstr "" msgid "- Part mode: Please select one object with at least two meshes." msgstr "" msgid "Union" msgstr "" msgid "Difference" msgstr "" msgid "Intersection" msgstr "" msgid "Selected Objects" msgstr "" msgid "Selected Parts" msgstr "" msgid "Keep original models" msgstr "" msgid "Execute" msgstr "" msgid "Entity Only" msgstr "" msgid "Perform Boolean operations on entities only." msgstr "" msgid "This object contains non-part components." msgstr "" msgid "Preparing data..." msgstr "" msgid "Computing..." msgstr "" msgid "Applying result.." msgstr "" msgid "Network Test" msgstr "" msgid "Start Test Multi-Thread" msgstr "" msgid "Start Test Single-Thread" msgstr "" msgid "Export Log" msgstr "" msgid "Studio Version:" msgstr "" msgid "System Version:" msgstr "" msgid "DNS Server:" msgstr "" msgid "Test QIDI Tech" msgstr "" msgid "Test QIDI Tech:" msgstr "" msgid "Test Bing.com" msgstr "" msgid "Test bing.com:" msgstr "" msgid "Test HTTP" msgstr "" msgid "Test HTTP Service:" msgstr "" msgid "Test storage" msgstr "" msgid "Test Storage Upload:" msgstr "" msgid "Test storage upgrade" msgstr "" msgid "Test Storage Upgrade:" msgstr "" msgid "Test storage download" msgstr "" msgid "Test Storage Download:" msgstr "" msgid "Test plugin download" msgstr "" msgid "Test Plugin Download:" msgstr "" msgid "Test Storage Upload" msgstr "" msgid "Log Info" msgstr "" msgid "Select filament preset" msgstr "" msgid "Create Filament" msgstr "" msgid "Create Based on Current Filament" msgstr "" msgid "Copy Current Filament Preset " msgstr "" msgid "Basic Information" msgstr "" msgid "Add Filament Preset under this filament" msgstr "" msgid "We could create the filament presets for your following printer:" msgstr "" msgid "Select Vendor" msgstr "" msgid "Input Custom Vendor" msgstr "" msgid "Can't find vendor I want" msgstr "" msgid "Select Type" msgstr "" msgid "Select Filament Preset" msgstr "" msgid "Serial" msgstr "" msgid "e.g. Basic, Matte, Silk, Marble" msgstr "" msgid "Filament Preset" msgstr "" msgid "Create" msgstr "" msgid "Vendor is not selected, please reselect vendor." msgstr "" msgid "Custom vendor is not input, please input custom vendor." msgstr "" msgid "\"QIDI\" or \"Generic\" can not be used as a Vendor for custom filaments." msgstr "" msgid "Filament type is not selected, please reselect type." msgstr "" msgid "Filament serial is not inputed, please input serial." msgstr "" msgid "There may be escape characters in the vendor or serial input of filament. Please delete and re-enter." msgstr "" msgid "All inputs in the custom vendor or serial are spaces. Please re-enter." msgstr "" msgid "The vendor can not be a number. Please re-enter." msgstr "" msgid "You have not selected a printer or preset yet. Please select at least one." msgstr "" #, possible-c-format, possible-boost-format msgid "" "The Filament name %s you created already exists. \n" "If you continue creating, the preset created will be displayed with its full name. Do you want to continue?" msgstr "" msgid "Some existing presets have failed to be created, as follows:\n" msgstr "" msgid "" "\n" "Do you want to rewrite it?" msgstr "" msgid "" "We would rename the presets as \"Vendor Type Serial @printer you selected\". \n" "To add preset for more prinetrs, Please go to printer selection" msgstr "" msgid "Create Printer/Nozzle" msgstr "" msgid "Create Printer" msgstr "" msgid "Create Nozzle for Existing Printer" msgstr "" msgid "Create from Template" msgstr "" msgid "Create Based on Current Printer" msgstr "" msgid "wiki" msgstr "" msgid "Import Preset" msgstr "" msgid "Create Type" msgstr "" msgid "The model is not fond, place reselect vendor." msgstr "" msgid "Select Printer" msgstr "" msgid "Select Model" msgstr "" msgid "Input Custom Model" msgstr "" msgid "Can't find my printer model" msgstr "" msgid "Input Custom Nozzle Diameter" msgstr "" msgid "Can't find my nozzle diameter" msgstr "" msgid "Rectangle" msgstr "" msgid "Printable Space" msgstr "" msgid "Hot Bed STL" msgstr "" msgid "Load stl" msgstr "" msgid "Hot Bed SVG" msgstr "" msgid "Load svg" msgstr "" msgid "Max Print Height" msgstr "" msgid "Preset path is not found, please reselect vendor." msgstr "" msgid "The printer model was not found, please reselect." msgstr "" msgid "The nozzle diameter is not fond, place reselect." msgstr "" msgid "The printer preset is not fond, place reselect." msgstr "" msgid "Printer Preset" msgstr "" msgid "Filament Preset Template" msgstr "" msgid "Deselect All" msgstr "" msgid "Process Preset Template" msgstr "" msgid "Back Page 1" msgstr "" msgid "You have not yet chosen which printer preset to create based on. Please choose the vendor and model of the printer" msgstr "" msgid "You have entered an illegal input in the printable area section on the first page. Please check before creating it." msgstr "" msgid "" "The printer preset you created already has a preset with the same name. Do you want to overwrite it?\n" "\tYes: Overwrite the printer preset with the same name, and filament and process presets with the same preset name will be recreated \n" "and filament and process presets without the same preset name will be reserve.\n" "\tCancel: Do not create a preset, return to the creation interface." msgstr "" msgid "You need to select at least one filament preset." msgstr "" msgid "You need to select at least one process preset." msgstr "" msgid "Create filament presets failed. As follows:\n" msgstr "" msgid "Create process presets failed. As follows:\n" msgstr "" msgid "Vendor is not found, please reselect." msgstr "" msgid "Current vendor has no models, please reselect." msgstr "" msgid "You have not selected the vendor and model or inputed the custom vendor and model." msgstr "" msgid "There may be escape characters in the custom printer vendor or model. Please delete and re-enter." msgstr "" msgid "All inputs in the custom printer vendor or model are spaces. Please re-enter." msgstr "" msgid "Please check bed printable shape and origin input." msgstr "" msgid "You have not yet selected the printer to replace the nozzle, please choose." msgstr "" msgid "The entered nozzle diameter is invalid, please re-enter:\n" msgstr "" msgid "" "The system preset does not allow creation. \n" "Please re-enter the printer model or nozzle diameter." msgstr "" msgid "Create Printer Successful" msgstr "" msgid "Create Filament Successful" msgstr "" msgid "Printer Created" msgstr "" msgid "Please go to printer settings to edit your presets" msgstr "" msgid "Filament Created" msgstr "" msgid "" "Please go to filament setting to edit your presets if you need.\n" "Please note that nozzle temperature, hot bed temperature, and maximum volumetric speed has a significant impact on printing quality. Please set them carefully." msgstr "" msgid "" "Studio has detected that your user presets synchronization function is not enabled, which may result in unsuccessful Filament settings on the Device page. \n" "Click \"Sync user presets\" to enable the synchronization function." msgstr "" msgid "Printer Setting" msgstr "" msgid "Printer preset bundle(.qdscfg)" msgstr "" msgid "Filament preset bundle(.qdsflmt)" msgstr "" msgid "Printer presets(.zip)" msgstr "" msgid "Filament presets(.zip)" msgstr "" msgid "Process presets(.zip)" msgstr "" msgid "initialize fail" msgstr "" msgid "add file fail" msgstr "" msgid "add bundle structure file fail" msgstr "" msgid "finalize fail" msgstr "" msgid "open zip written fail" msgstr "" msgid "Export successful" msgstr "" #, possible-c-format, possible-boost-format msgid "" "The '%s' folder already exists in the current directory. Do you want to clear it and rebuild it.\n" "If not, a time suffix will be added, and you can modify the name after creation." msgstr "" msgid "" "Printer and all the filament&process presets that belong to the printer. \n" "Can be shared with others." msgstr "" msgid "" "User's fillment preset set. \n" "Can be shared with others." msgstr "" msgid "Only display printer names with changes to printer, filament, and process presets." msgstr "" msgid "Only display the filament names with changes to filament presets." msgstr "" msgid "Only printer names with user printer presets will be displayed, and each preset you choose will be exported as a zip." msgstr "" msgid "" "Only the filament names with user filament presets will be displayed, \n" "and all user filament presets in each filament name you select will be exported as a zip." msgstr "" msgid "" "Only printer names with changed process presets will be displayed, \n" "and all user process presets in each printer name you select will be exported as a zip." msgstr "" msgid "Please select at least one printer or filament." msgstr "" msgid "Please select a type you want to export" msgstr "" msgid "Failed to create temporary folder, please try Export Configs again." msgstr "" msgid "Edit Filament" msgstr "" msgid "Filament presets under this filament" msgstr "" msgid "Note: If the only preset under this filament is deleted, the filament will be deleted after exiting the dialog." msgstr "" msgid "Presets inherited by other presets can not be deleted" msgstr "" msgid "The following presets inherits this preset." msgid_plural "The following preset inherits this preset." msgstr[0] "" msgstr[1] "" msgid "Delete Preset" msgstr "" msgid "Are you sure to delete the selected preset?" msgstr "" msgid "Delete preset" msgstr "" msgid "+ Add Preset" msgstr "" msgid "Delete Filament" msgstr "" msgid "" "All the filament presets belong to this filament would be deleted. \n" "If you are using this filament on your printer, please reset the filament information for that slot." msgstr "" msgid "Delete filament" msgstr "" msgid "Add Preset" msgstr "" msgid "Add preset for new printer" msgstr "" msgid "Copy preset from filament" msgstr "" msgid "The filament choice not find filament preset, please reselect it" msgstr "" msgid "[Delete Required]" msgstr "" msgid "Edit Preset" msgstr "" msgid "For more information, please check out Wiki" msgstr "" msgid "Collapse" msgstr "" msgid "Daily Tips" msgstr "" msgid "" "The printer nozzle information has not been set.\n" "Please configure it before proceeding with the calibration." msgstr "" msgid "" "The nozzle type does not match the actual printer nozzle type.\n" "Please click the Sync button above and restart the calibration." msgstr "" #, possible-c-format, possible-boost-format msgid "" "Please input valid values:\n" "Start value: >= %.1f\n" "End value: <= %.1f\n" "End value: > Start value\n" "Value step: >= %.3f)" msgstr "" #, possible-c-format, possible-boost-format msgid "nozzle size in preset: %d" msgstr "" #, possible-c-format, possible-boost-format msgid "nozzle size memorized: %d" msgstr "" msgid "The size of nozzle type in preset is not consistent with memorized nozzle.Did you change your nozzle lately ? " msgstr "" #, possible-c-format, possible-boost-format msgid "nozzle[%d] in preset: %.1f" msgstr "" #, possible-c-format, possible-boost-format msgid "nozzle[%d] memorized: %.1f" msgstr "" msgid "Your nozzle type in preset is not consistent with memorized nozzle.Did you change your nozzle lately ? " msgstr "" #, possible-c-format, possible-boost-format msgid "Printing %1s material with %2s nozzle may cause nozzle damage." msgstr "" msgid "Need select printer" msgstr "" msgid "The start, end or step is not valid value." msgstr "" msgid "The number of printer extruders and the printer selected for calibration does not match." msgstr "" #, possible-c-format, possible-boost-format msgid "The nozzle diameter of %sextruder is 0.2mm which does not support automatic Flow Dynamics calibration." msgstr "" #, possible-c-format, possible-boost-format msgid "" "The currently selected nozzle diameter of %s extruder does not match the actual nozzle diameter.\n" "Please click the Sync button above and restart the calibration." msgstr "" msgid "" "The nozzle diameter does not match the actual printer nozzle diameter.\n" "Please click the Sync button above and restart the calibration." msgstr "" #, possible-c-format, possible-boost-format msgid "" "The currently selected nozzle type of %s extruder does not match the actual printer nozzle type.\n" "Please click the Sync button above and restart the calibration." msgstr "" msgid "Flow calibration does not support multiple nozzle diameters at the same time. Please ensure that the nozzle diameter used by the filament being calibrated is consistent before starting the calibration again." msgstr "" msgid "Unable to calibrate: maybe because the set calibration value range is too large, or the step is too small" msgstr "" msgid "Physical Printer" msgstr "" msgid "Print Host upload" msgstr "" msgid "Test" msgstr "" msgid "Could not get a valid Printer Host reference" msgstr "" msgid "Success!" msgstr "" msgid "Refresh Printers" msgstr "" msgid "HTTPS CA file is optional. It is only needed if you use HTTPS with a self-signed certificate." msgstr "" msgid "Certificate files (*.crt, *.pem)|*.crt;*.pem|All files|*.*" msgstr "" msgid "Open CA certificate file" msgstr "" #, possible-c-format, possible-boost-format msgid "On this system, %s uses HTTPS certificates from the system Certificate Store or Keychain." msgstr "" msgid "To use a custom CA file, please import your CA file into Certificate Store / Keychain." msgstr "" msgid "Connection to printers connected via the print host failed." msgstr "" #, possible-c-format, possible-boost-format msgid "Mismatched type of print host: %s" msgstr "" msgid "Connection to AstroBox works correctly." msgstr "" msgid "Could not connect to AstroBox" msgstr "" msgid "Note: AstroBox version at least 1.1.0 is required." msgstr "" msgid "Connection to Duet works correctly." msgstr "" msgid "Could not connect to Duet" msgstr "" msgid "Unknown error occured" msgstr "" msgid "Wrong password" msgstr "" msgid "Could not get resources to create a new connection" msgstr "" msgid "Upload not enabled on FlashAir card." msgstr "" msgid "Connection to FlashAir works correctly and upload is enabled." msgstr "" msgid "Could not connect to FlashAir" msgstr "" msgid "Note: FlashAir with firmware 2.00.02 or newer and activated upload function is required." msgstr "" msgid "Connection to MKS works correctly." msgstr "" msgid "Could not connect to MKS" msgstr "" msgid "Connection to OctoPrint works correctly." msgstr "" msgid "Could not connect to OctoPrint" msgstr "" msgid "Note: OctoPrint version at least 1.1.0 is required." msgstr "" msgid "Connection to Prusa SL1 / SL1S works correctly." msgstr "" msgid "Could not connect to Prusa SLA" msgstr "" msgid "Connection to PrusaLink works correctly." msgstr "" msgid "Could not connect to PrusaLink" msgstr "" msgid "Connection to Repetier works correctly." msgstr "" msgid "Could not connect to Repetier" msgstr "" msgid "Note: Repetier version at least 0.90.0 is required." msgstr "" #, possible-boost-format msgid "" "HTTP status: %1%\n" "Message body: \"%2%\"" msgstr "" #, possible-boost-format msgid "" "Parsing of host response failed.\n" "Message body: \"%1%\"\n" "Error: \"%2%\"" msgstr "" #, possible-boost-format msgid "" "Enumeration of host printers failed.\n" "Message body: \"%1%\"\n" "Error: \"%2%\"" msgstr "" msgid "It has a small layer height, and results in almost negligible layer lines and high printing quality. It is suitable for most general printing cases." msgstr "" msgid "Compared with the default profile of a 0.2 mm nozzle, it has lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in much higher printing quality, but a much longer printing time." msgstr "" msgid "Compared with the default profile of a 0.2 mm nozzle, it has a slightly bigger layer height, and results in almost negligible layer lines, and slightly shorter printing time." msgstr "" msgid "Compared with the default profile of a 0.2 mm nozzle, it has a bigger layer height, and results in slightly visible layer lines, but shorter printing time." msgstr "" msgid "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer height, and results in almost invisible layer lines and higher printing quality, but shorter printing time." msgstr "" msgid "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer lines, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in almost invisible layer lines and much higher printing quality, but much longer printing time." msgstr "" msgid "Compared with the default profile of 0.2 mm nozzle, it has a smaller layer height, and results in minimal layer lines and higher printing quality, but shorter printing time." msgstr "" msgid "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer lines, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in minimal layer lines and much higher printing quality, but much longer printing time." msgstr "" msgid "It has a general layer height, and results in general layer lines and printing quality. It is suitable for most general printing cases." msgstr "" msgid "Compared with the default profile of a 0.4 mm nozzle, it has more wall loops and a higher sparse infill density. So, it results in higher strength of the prints, but more filament consumption and longer printing time." msgstr "" msgid "Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer height, and results in more apparent layer lines and lower printing quality, but slightly shorter printing time." msgstr "" msgid "Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer height, and results in more apparent layer lines and lower printing quality, but shorter printing time." msgstr "" msgid "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and higher printing quality, but longer printing time." msgstr "" msgid "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in less apparent layer lines and much higher printing quality, but much longer printing time." msgstr "" msgid "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, and results in almost negligible layer lines and higher printing quality, but longer printing time." msgstr "" msgid "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in almost negligible layer lines and much higher printing quality, but much longer printing time." msgstr "" msgid "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, and results in almost negligible layer lines and longer printing time." msgstr "" msgid "It has a big layer height, and results in apparent layer lines and ordinary printing quality and printing time." msgstr "" msgid "Compared with the default profile of a 0.6 mm nozzle, it has more wall loops and a higher sparse infill density. So, it results in higher strength of the prints, but more filament consumption and longer printing time." msgstr "" msgid "Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer height, and results in more apparent layer lines and lower printing quality, but shorter printing time in some printing cases." msgstr "" msgid "Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer height, and results in much more apparent layer lines and much lower printing quality, but shorter printing time in some printing cases." msgstr "" msgid "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and slight higher printing quality, but longer printing time." msgstr "" msgid "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and higher printing quality, but longer printing time." msgstr "" msgid "It has a very big layer height, and results in very apparent layer lines, low printing quality and general printing time." msgstr "" msgid "Compared with the default profile of a 0.8 mm nozzle, it has a bigger layer height, and results in very apparent layer lines and much lower printing quality, but shorter printing time in some printing cases." msgstr "" msgid "Compared with the default profile of a 0.8 mm nozzle, it has a much bigger layer height, and results in extremely apparent layer lines and much lower printing quality, but much shorter printing time in some printing cases." msgstr "" msgid "Compared with the default profile of a 0.8 mm nozzle, it has a slightly smaller layer height, and results in slightly less but still apparent layer lines and slightly higher printing quality, but longer printing time in some printing cases." msgstr "" msgid "Compared with the default profile of a 0.8 mm nozzle, it has a smaller layer height, and results in less but still apparent layer lines and slightly higher printing quality, but longer printing time in some printing cases." msgstr "" msgid "This is neither a commonly used filament, nor one of QIDI filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances." msgstr "" msgid "When printing this filament, there's a risk of warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials." msgstr "" msgid "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials." msgstr "" msgid "To get better transparent or translucent results with the corresponding filament, please refer to this wiki: Printing tips for transparent PETG." msgstr "" msgid "To make the prints get higher gloss, please dry the filament before use, and set the outer wall speed to be 40 to 60 mm/s when slicing." msgstr "" msgid "This filament is only used to print models with a low density usually, and some special parameters are required. To get better printing quality, please refer to this wiki: Instructions for printing RC model with foaming PLA (PLA Aero)." msgstr "" msgid "This filament is only used to print models with a low density usually, and some special parameters are required. To get better printing quality, please refer to this wiki: ASA Aero Printing Guide." msgstr "" msgid "This filament is too soft and not compatible with the AMS. Printing it is of many requirements, and to get better printing quality, please refer to this wiki: TPU printing guide." msgstr "" msgid "This filament has high enough hardness (about 67D) and is compatible with the AMS. Printing it is of many requirements, and to get better printing quality, please refer to this wiki: TPU printing guide." msgstr "" msgid "If you are to print a kind of soft TPU, please don't slice with this profile, and it is only for TPU that has high enough hardness (not less than 55D) and is compatible with the AMS. To get better printing quality, please refer to this wiki: TPU printing guide." msgstr "" msgid "This is a water-soluble support filament, and usually it is only for the support structure and not for the model body. Printing this filament is of many requirements, and to get better printing quality, please refer to this wiki: PVA Printing Guide." msgstr "" msgid "This is a non-water-soluble support filament, and usually it is only for the support structure and not for the model body. To get better printing quality, please refer to this wiki: Printing Tips for Support Filament and Support Function." msgstr "" msgid "The generic presets are conservatively tuned for compatibility with a wider range of filaments. For higher printing quality and speeds, please use QIDI filaments with QIDI presets." msgstr "" msgid "High quality profile for 0.2mm nozzle, prioritizing print quality." msgstr "" msgid "High quality profile for 0.16mm layer height, prioritizing print quality and strength." msgstr "" msgid "Standard profile for 0.16mm layer height, prioritizing speed." msgstr "" msgid "High quality profile for 0.2mm layer height, prioritizing strength and print quality." msgstr "" msgid "Standard profile for 0.4mm nozzle, prioritizing speed." msgstr "" msgid "High quality profile for 0.6mm nozzle, prioritizing print quality and strength." msgstr "" msgid "Strength profile for 0.6mm nozzle, prioritizing strength." msgstr "" msgid "Standard profile for 0.6mm nozzle, prioritizing speed." msgstr "" msgid "High quality profile for 0.8mm nozzle, prioritizing print quality." msgstr "" msgid "Strength profile for 0.8mm nozzle, prioritizing strength." msgstr "" msgid "Standard profile for 0.8mm nozzle, prioritizing speed." msgstr "" msgid "Failed to create GCodeV2" msgstr "" msgid "Failed to parse response" msgstr "" msgid "Helio simulation task failed" msgstr "" msgid "Helio optimization task failed" msgstr "" msgid "Helio API endpoint is empty, please check the configuration." msgstr "" msgid "Personal assecc token is empty, please fill in the correct token." msgstr "" msgid "Helio: Presigned URL Created" msgstr "" msgid "Helio: file succesfully uploaded" msgstr "" msgid "Helio: file upload failed" msgstr "" msgid "Please make sure you have the corrent API key set in preferences." msgstr "" msgid "Helio: GCode created successfully" msgstr "" msgid "Helio: simulation successfully created" msgstr "" msgid "Helio: simulation working" msgstr "" msgid "Helio: simulation failed" msgstr "" msgid "Helio: Simulation check failed" msgstr "" msgid "Helio: Failed to create Simulation" msgstr "" msgid "Helio: Failed to create GCode" msgstr "" msgid "Helio: optimization successfully created" msgstr "" msgid "Helio: optimization working" msgstr "" msgid "Helio: Optimzaion check failed" msgstr "" msgid "Helio: Failed to create Optimization" msgstr "" msgid "Helio: GCode downloaded successfully" msgstr "" msgid "Helio: GCode download failed" msgstr "" msgid "No AMS" msgstr "" msgid "There is no device available to send printing." msgstr "" msgid "The number of printers in use simultaneously cannot be equal to 0." msgstr "" msgid "Use External Spool" msgstr "" msgid "Select Printers" msgstr "" msgid "Device Name" msgstr "" msgid "Device Status" msgstr "" msgid "Ams Status" msgstr "" msgid "Please select the devices you would like to manage here (up to 6 devices)" msgstr "" msgid "Printing Options" msgstr "" msgid "Bed Leveling" msgstr "" msgid "Send Options" msgstr "" msgid "printers at the same time.(It depends on how many devices can undergo heating at the same time.)" msgstr "" msgid "Wait" msgstr "" msgid "minute each batch.(It depends on how long it takes to complete the heating.)" msgstr "" msgid "Task Sending" msgstr "" msgid "Task Sent" msgstr "" msgid "Edit multiple printers" msgstr "" msgid "Select connected printers (0/6)" msgstr "" #, possible-c-format, possible-boost-format msgid "Select Connected Printers (%d/6)" msgstr "" #, possible-c-format, possible-boost-format msgid "The maximum number of printers that can be selected is %d" msgstr "" msgid "No task" msgstr "" msgid "Edit Printers" msgstr "" msgid "Task Name" msgstr "" msgid "Actions" msgstr "" msgid "Task Status" msgstr "" msgid "Sent Time" msgstr "" msgid "There are no tasks to be sent!" msgstr "" msgid "No historical tasks!" msgstr "" msgid "Upgrading" msgstr "" msgid "syncing" msgstr "" msgid "Printing Finish" msgstr "" msgid "Printing Failed" msgstr "" msgid "Printing Pause" msgstr "" msgid "Pending" msgstr "" msgid "Sending" msgstr "" msgid "Sending Finish" msgstr "" msgid "Sending Cancel" msgstr "" msgid "Sending Failed" msgstr "" msgid "Print Success" msgstr "" msgid "Print Failed" msgstr "" msgid "Removed" msgstr "" msgid "Management user presets" msgstr "" msgid "No content" msgstr "" #, possible-c-format, possible-boost-format msgid "Printer presets (%d/%d)" msgstr "" #, possible-c-format, possible-boost-format msgid "Filament presets (%d/%d)" msgstr "" #, possible-c-format, possible-boost-format msgid "Process presets (%d/%d)" msgstr "" #, possible-c-format, possible-boost-format msgid "%u Selected" msgstr "" msgid "Please select the preset to be deleted" msgstr "" #, possible-c-format, possible-boost-format msgid "%d %s Preset will be deleted." msgstr "" msgid "Filament grouping" msgstr "" msgid "Don't remind me again" msgstr "" msgid "No further pop-up will appear. You can reopen it in 'Preferences'" msgstr "" msgid "Filament-Saving Mode" msgstr "" msgid "Convenience Mode" msgstr "" msgid "Custom Mode" msgstr "" msgid "Generates filament grouping for the left and right nozzles based on the most filament-saving principles to minimize waste" msgstr "" msgid "Generates filament grouping for the left and right nozzles based on the printer's actual filament status, reducing the need for manual filament adjustment" msgstr "" msgid "Manually assign filament to the left or right nozzle" msgstr "" msgid "Global settings" msgstr "" msgid "Video tutorial" msgstr "" msgid "Learn more" msgstr "" msgid "(Sync with printer)" msgstr "" #, possible-c-format, possible-boost-format msgid "Error: %s extruder has no available %s nozzle, current group result is invalid." msgstr "" msgid "We will slice according to this grouping method:" msgstr "" msgid "Tips: You can drag the filaments to reassign them to different nozzles." msgstr "" msgid "Please adjust your grouping or click " msgstr "" msgid " to set nozzle count" msgstr "" #, possible-c-format, possible-boost-format msgid "Left Extruder(%d)" msgstr "" #, possible-c-format, possible-boost-format msgid "Right Extruder(Std: %d, HF: %d)" msgstr "" #, possible-c-format, possible-boost-format msgid "Right Extruder(%d)" msgstr "" msgid "The filament grouping method for current plate is determined by the dropdown option at the slicing plate button." msgstr "" msgid "Skip Objects" msgstr "" msgid "Zoom Out" msgstr "" msgid "100 %" msgstr "" msgid "Zoom In" msgstr "" msgid "Load skipping objects information failed. Please try again." msgstr "" msgid "Loading ..." msgstr "" #, possible-c-format, possible-boost-format msgid "%d%%" msgstr "" #, possible-c-format, possible-boost-format msgid "%d" msgstr "" #, possible-c-format, possible-boost-format msgid "/%d Selected" msgstr "" msgid "Nothing selected" msgstr "" msgid "Over 64 objects in single plate" msgstr "" msgid "The current print job cannot be skipped" msgstr "" msgid "Skipping all objects." msgstr "" msgid "The printing job will be stopped. Continue?" msgstr "" #, possible-c-format, possible-boost-format msgid "Skipping %d objects." msgstr "" msgid "This action cannot be undone. Continue?" msgstr "" msgid "Skipping objects." msgstr "" msgid "Continue" msgstr "" msgid "Null Color" msgstr "" msgid "Multiple Color" msgstr "" msgid "Official Filament" msgstr "" msgid "More Colors" msgstr "" msgid "Please set nozzle count" msgstr "" msgid "Error: Can not set both nozzle count to zero." msgstr "" #, possible-c-format, possible-boost-format msgid "Error: Nozzle count can not exceed %d." msgstr "" msgid "Nozzle Selection" msgstr "" msgid "Available Nozzles" msgstr "" msgid "Caution: Mixing nozzle diameters in one print is not supported. If the selected size is only on one extruder, single-extruder printing will be enforced." msgstr "" msgid "Unknown nozzle detected. Refresh to update info (unrefreshed nozzles will be excluded during slicing). Verify nozzle diameter & flow rate against displayed values." msgstr "" msgid "Unknown nozzle detected. Refresh to update (unrefreshed nozzles will be skipped in slicing)." msgstr "" msgid "Please confirm whether the required nozzle diameter and flow rate match the currently displayed values." msgstr "" msgid "Your printer has different nozzles installed. Please select a nozzle for this print." msgstr "" msgid "Purge Mode Settings" msgstr "" msgid "Standard Mode" msgstr "" msgid "Performs full purging for the best print quality. Requires more material and time." msgstr "" msgid "Purge Saving" msgstr "" msgid "Reduces purge waste and prints faster. May cause slight color mixing or small surface defects." msgstr "" msgid "Learn more about purge mode" msgstr "" #: resources/data/hints.ini: [hint:How to use keyboard shortcuts] msgid "How to use keyboard shortcuts\nDid you know that QIDI Studio offers a wide range of keyboard shortcuts and 3D scene operations." msgstr "" #: resources/data/hints.ini: [hint:Cut Tool] msgid "Cut Tool\nDid you know that you can cut a model at any angle and position with the cutting tool?" msgstr "" #: resources/data/hints.ini: [hint:Fix Model] msgid "Fix Model\nDid you know that you can fix a corrupted 3D model to avoid a lot of slicing problems on the Windows system?" msgstr "" #: resources/data/hints.ini: [hint:Timelapse] msgid "Timelapse\nDid you know that you can generate a timelapse video during each print?" msgstr "" #: resources/data/hints.ini: [hint:Auto-Arrange] msgid "Auto-Arrange\nDid you know that you can auto-arrange all objects in your project?" msgstr "" #: resources/data/hints.ini: [hint:Auto-Orient] msgid "Auto-Orient\nDid you know that you can rotate objects to an optimal orientation for printing by a simple click?" msgstr "" #: resources/data/hints.ini: [hint:Lay on Face] msgid "Lay on Face\nDid you know that you can quickly orient a model so that one of its faces sits on the print bed? Select the \"Place on face\" function or press the F key." msgstr "" #: resources/data/hints.ini: [hint:Object List] msgid "Object List\nDid you know that you can view all objects/parts in a list and change settings for each object/part?" msgstr "" #: resources/data/hints.ini: [hint:Simplify Model] msgid "Simplify Model\nDid you know that you can reduce the number of triangles in a mesh using the Simplify mesh feature? Right-click the model and select Simplify model. Read more in the documentation." msgstr "" #: resources/data/hints.ini: [hint:Slicing Parameter Table] msgid "Slicing Parameter Table\nDid you know that you can view all objects/parts on a table and change settings for each object/part?" msgstr "" #: resources/data/hints.ini: [hint:Split to Objects/Parts] msgid "Split to Objects/Parts\nDid you know that you can split a big object into small ones for easy colorizing or printing?" msgstr "" #: resources/data/hints.ini: [hint:Subtract a Part] msgid "Subtract a Part\nDid you know that you can subtract one mesh from another using the Negative part modifier? That way you can, for example, create easily resizable holes directly in QIDI Studio. Read more in the documentation." msgstr "" #: resources/data/hints.ini: [hint:STEP] msgid "STEP\nDid you know that you can improve your print quality by slicing a STEP file instead of an STL?\nQIDI Studio supports slicing STEP files, providing smoother results than a lower resolution STL. Give it a try!" msgstr "" #: resources/data/hints.ini: [hint:Z seam location] msgid "Z seam location\nDid you know that you can customize the location of the Z seam, and even paint it on your print, to have it in a less visible location? This improves the overall look of your model. Check it out!" msgstr "" #: resources/data/hints.ini: [hint:Fine-tuning for flow rate] msgid "Fine-tuning for flow rate\nDid you know that flow rate can be fine-tuned for even better-looking prints? Depending on the material, you can improve the overall finish of the printed model by doing some fine-tuning." msgstr "" #: resources/data/hints.ini: [hint:Split your prints into plates] msgid "Split your prints into plates\nDid you know that you can split a model that has a lot of parts into individual plates ready to print? This will simplify the process of keeping track of all the parts." msgstr "" #: resources/data/hints.ini: [hint:Speed up your print with Adaptive Layer Height] msgid "Speed up your print with Adaptive Layer Height\nDid you know that you can print a model even faster, by using the Adaptive Layer Height option? Check it out!" msgstr "" #: resources/data/hints.ini: [hint:Support painting] msgid "Support painting\nDid you know that you can paint the location of your supports? This feature makes it easy to place the support material only on the sections of the model that actually need it." msgstr "" #: resources/data/hints.ini: [hint:Different types of supports] msgid "Different types of supports\nDid you know that you can choose from multiple types of supports? Tree supports work great for organic models, while saving filament and improving print speed. Check them out!" msgstr "" #: resources/data/hints.ini: [hint:Printing Silk Filament] msgid "Printing Silk Filament\nDid you know that Silk filament needs special consideration to print it successfully? Higher temperature and lower speed are always recommended for the best results." msgstr "" #: resources/data/hints.ini: [hint:Brim for better adhesion] msgid "Brim for better adhesion\nDid you know that when printing models have a small contact interface with the printing surface, it's recommended to use a brim?" msgstr "" #: resources/data/hints.ini: [hint:Set parameters for multiple objects] msgid "Set parameters for multiple objects\nDid you know that you can set slicing parameters for all selected objects at one time?" msgstr "" #: resources/data/hints.ini: [hint:Stack objects] msgid "Stack objects\nDid you know that you can stack objects as a whole one?" msgstr "" #: resources/data/hints.ini: [hint:Flush into support/objects/infill] msgid "Flush into support/objects/infill\nDid you know that you can save the wasted filament by flushing them into support/objects/infill during filament change?" msgstr "" #: resources/data/hints.ini: [hint:Improve strength] msgid "Improve strength\nDid you know that you can use more wall loops and higher sparse infill density to improve the strength of the model?" msgstr "" #: resources/data/hints.ini: [hint:When need to print with the printer door opened] msgid "When need to print with the printer door opened\nDid you know that opening the printer door can reduce the probability of extruder/hotend clogging when printing lower temperature filament with a higher enclosure temperature. More info about this in the Wiki." msgstr "" #: resources/data/hints.ini: [hint:Avoid warping] msgid "Avoid warping\nDid you know that when printing materials that are prone to warping such as ABS, appropriately increasing the heatbed temperature can reduce the probability of warping." msgstr "" #: resources/data/helio_hints.ini: [hint: Single-Material Only] msgid "Single-Material Only\nHelio currently simulates one material and one nozzle per job. Multi-material or multi-extruder G-code adds long pauses that break thermal continuity, so results wouldn’t be meaningful." msgstr "" #: resources/data/helio_hints.ini: [hint: One Plate per Job] msgid "One Plate per Job\nUpload G-code with a single build plate—multi-plate projects aren’t yet supported, so only the first plate would run." msgstr "" #: resources/data/helio_hints.ini: [hint: What is the Thermal Quality Index?] msgid "What is the Thermal Quality Index?\nThe Thermal Quality Index (scale –100 to +100) shows how hot or cold each region prints—green (≈ 0) is the “just right” zone for strong, warp-free parts. Keep most of the part green for best results." msgstr "" #: resources/data/helio_hints.ini: [hint: Voxel-Level Accuracy] msgid "Voxel-Level Accuracy\nWe predict temperature in every voxel at every time-step, and for standard jobs the forecast is typically within ±5–10 °C. Pauses, custom firmware or odd cooling can widen that margin." msgstr "" #: resources/data/helio_hints.ini: [hint: Fan & Airflow Model] msgid "Fan & Airflow Model\nA simplified fan-and-room model shows how cooling settings change part temps without slow CFD maths—great for day-to-day tuning. Chamber vortices aren’t yet simulated so runs stay fast." msgstr "" #: resources/data/helio_hints.ini: [hint: TQI Limits Explained] msgid "TQI Limits Explained\n-100 → too cold: tensile strength is ~50 % lower than parts printed at the ideal 0 (ASTM D638 dog-bone tests). +100 → too hot: layers stay molten and may sag or collapse. Keep regions near 0 for peak strength and accuracy." msgstr "" #: resources/data/helio_hints.ini: [hint: What Drives Runtime?] msgid "What Drives Runtime?\nExtra layers, dense infill, lots of tiny arcs (small mesh elements) or very slow printing speeds all extend simulation time because the solver must step through more seconds. Multi-core CPUs or CUDA GPUs speed things up." msgstr "" #: resources/data/helio_hints.ini: [hint: Nozzle Temp Range] msgid "Nozzle Temp Range\nSupported set-points are 190 – 320 °C; anything outside is clamped to keep physics realistic." msgstr "" #: resources/data/helio_hints.ini: [hint: Debugging Flowchart] msgid "Debugging Flowchart\nNot sure why a result looks off? Follow our step-by-step debugging flowchart to trace settings, G-code and material issues in minutes." msgstr "" #: resources/data/helio_hints.ini: [hint: Why Cooling Varies] msgid "Why Cooling Varies\nOuter walls and bridges cool fastest while thick interiors stay warmer—geometry, airflow and tool-path all play a part, and the simulation visualises these differences." msgstr "" #: resources/data/helio_hints.ini: [hint: Extrusion Temp Model] msgid "Extrusion Temp Model\nMaterial properties shape the melt curve, but printer geometry decides how much heat the filament actually gains, so the model is material-specific and printer-calibrated." msgstr "" #: resources/data/helio_hints.ini: [hint: Nozzle setting of 190 °C vs 320 °C?] msgid "Nozzle setting of 190 °C vs 320 °C?\nA 100 °C nozzle change only nudges the thermal index because extrusion temp, flow rate and post-deposition cooling dominate the part’s heat history." msgstr "" #: resources/data/helio_hints.ini: [hint: Bed Temperature influence] msgid "Bed Temperature influence\nOnly the first-layer bed temp feeds the model right now; later bed changes aren’t yet captured." msgstr "" #: resources/data/helio_hints.ini: [hint: Actual Tool-Path] msgid "Actual Tool-Path\nYes—your exact G-code path, speeds and fan commands are simulated." msgstr "" #: resources/data/helio_hints.ini: [hint: Mesh Resolution] msgid "Mesh Resolution\nThe voxel grid is finer than the G-code line spacing, capturing layer-by-layer detail without wasting compute." msgstr "" #: resources/data/helio_hints.ini: [hint: Shrinkage, Warping & Stress] msgid "Shrinkage, Warping & Stress\nBy controlling the thermal index you can remove the heat-driven causes of warp and stress." msgstr ""