From 688396a0a0a52bc9ae99830c3dd637d5dd4b38f5 Mon Sep 17 00:00:00 2001
From: Dima Yakovenko <leshiy-dn@yandex.ru>
Date: Sun, 1 Jun 2025 11:44:03 +0300
Subject: [PATCH] Update index.html

Wrong Russian translate
---
 resources/web/filament/index.html | 48 +++++++++++++++----------------
 1 file changed, 24 insertions(+), 24 deletions(-)

diff --git a/resources/web/filament/index.html b/resources/web/filament/index.html
index 08bdc84..0a58d92 100644
--- a/resources/web/filament/index.html
+++ b/resources/web/filament/index.html
@@ -635,29 +635,29 @@
                         "Compare filaments": "Porównaj filamenty:"
                     },
                     ru_RU: {
-                        "Water resistance": "Resistência à água",
-                        "Corrosion resistance": "Resistência à corrosão",
-                        "Creep resistance": "Resistência ao arrasto",
-                        "Filaments characteristics": "Características dos filamentos",
-                        "Tensile strength": "Resistência à tracção",
-                        "Tensile modulus": "Módulo de tração",
-                        "Elongation at break": "Alongamento no intervalo",
-                        "Flexural strength": "Resistência à flexão",
-                        "Flexural modulus": "Módulo de flexão",
-                        "Notch impact strength": "Resistência ao impacto do entalhe",
-                        "Drying": "Secagem",
-                        "Recommended drying": "Secagem recomendada",
-                        "Need to dry": "Necessidade de secar",
-                        "Preparation for printing": "Preparação para impressão",
-                        "Dry conditions": "Condições secas",
-                        "Suitable hot bed temperature": "Temperatura adequada do leito quente",
-                        "Sealed box": "Caixa selada",
-                        "Print settings": "Configuração de impressão",
-                        "Nozzle temperature": "Temperatura do bico",
-                        "Print speed": "Velocidade de impressão",
-                        "Post processing": "Pós-processamento",
-                        "Anneal": "Anexo",
-                        "Compare filaments": "Более длинный шелк:"
+                        "Water resistance": "Влагостойкость",
+                        "Corrosion resistance": "Коррозионная стойкость",
+                        "Creep resistance": "Усадка",
+                        "Filaments characteristics": "Характеристика филамента",
+                        "Tensile strength": "Предел прочности",
+                        "Tensile modulus": "Модуль упругости при растяжении",
+                        "Elongation at break": "Относительное удлинение при разрыве",
+                        "Flexural strength": "Прочность на изгиб",
+                        "Flexural modulus": "Модуль упругости при изгибе",
+                        "Notch impact strength": "Ударная вязкость с надрезом",
+                        "Drying": "Сушка",
+                        "Recommended drying": "Рекомендуется сушка",
+                        "Need to dry": "Необходима сушка",
+                        "Preparation for printing": "Подготовка к печати",
+                        "Dry conditions": "Время сушки",
+                        "Suitable hot bed temperature": "Температура стола",
+                        "Sealed box": "Закрытая камера",
+                        "Print settings": "Настройки печати",
+                        "Nozzle temperature": "Температоура сопла",
+                        "Print speed": "Скорость печати",
+                        "Post processing": "Постобработка",
+                        "Anneal": "Температура обжига",
+                        "Compare filaments": "Сравнить"
                     },
                     sv_SE: {
                         "Water resistance": "Vattentålighet",
@@ -1579,4 +1579,4 @@
 </script>
 
 </body>
-</html>
\ No newline at end of file
+</html>