QIDIStudio/resources/profiles/Q Series/filament/QIDI PET-CF.json

{
    "type": "filament",
    "filament_id": "GFN98",
    "setting_id": "GFSN99",
    "name": "QIDI PET-CF@Q-Series",
    "from": "system",
    "instantiation": "false",
    "inherits": "fdm_filament_common",
    "additional_cooling_fan_speed_unseal": ["0"],
    "additional_cooling_fan_speed": ["0"],
    "close_fan_the_first_x_layers": ["3"],
    "fan_cooling_layer_time": ["10"],
    "fan_max_speed": ["40"],
    "fan_min_speed": ["20"],
    "filament_adhesiveness_category": ["800"],
    "filament_density": ["1.3"],
    "filament_flow_ratio": ["1"],
    "filament_max_volumetric_speed": ["8"],
    "filament_type": ["PET-CF"],
    "impact_strength_z":["4.5"],
    "nozzle_temperature_initial_layer": ["280"],
    "nozzle_temperature_range_high": ["320"],
    "nozzle_temperature_range_low": ["280"],
    "nozzle_temperature": ["280"],
    "overhang_fan_speed": ["40"],
    "overhang_fan_threshold": ["0%"],
    "pressure_advance": ["0.032"],
    "temperature_vitrification": ["185"],
    "textured_plate_temp_initial_layer" : ["80"],
    "textured_plate_temp" : ["80"],
    "compatible_printers": []
}