homepage

Filament	Drying box	Anneal	Water resistance	Corrosion resistance	Creep resistance	HDT 0.45	HDT 1.80	Tensile strength(MPa)	Tensile modulus(MPa)	Elongation at break(%)	Flexural strength(MPa)	Flexural modulus(MPa)	Notch impact strength(KJ/㎡)
ToughPETG	≤20％	/	+++	++	+++	78℃	73℃	40.3±0.6	1780±80	4.0±0.2	62.8±0.4	1919±54	13.9±2.3
UltraABS-GF25	≤30％	/	+++	+	+++	97℃	93℃	48.48 ± 0.61	3752.13 ± 68.39	2.10 ± 0.10	78.80 ± 1.26	3531.71 ± 75.79	8.91 ± 0.63
ABS Rapido	≤30％	/	++	+	+++	85℃	/	41 ± 1	3850 ± 150	11 ± 1	77.5 ± 2.5	77.5 ± 2.5	20 ± 2
PA12-CF	≤15％	80-100℃	+	++	+	149.6℃	112.4℃	87.49 ± 2.81	5438.40 ± 282.82	2.59 ± 0.19	133.17 ± 4.66	4667.43 ± 339.80	6.11 ± 1.45
PATH-CF	≤15％	80-100℃	++	+++	+++	192.3℃	121.7℃	104.90 ± 1.99	8383.26 ± 419.53	1.60 ± 0.07	147.70 ± 4.09	5969.35 ± 145.28	6.17 ± 0.2
PET-CF	≤15％	80-100℃	+++	+++	+++	148.8℃	112.1℃	87.41 ± 3.57	6025.53 ± 355.46	1.99 ±0.18	122.69 ± 5.19	5313.21 ± 197.89	5.57 ± 0.58
PLA Rapido	≤30％	/	+	+	+	57℃	/	39 ± 3	4650 ± 150	12.5 ± 2.5	72.5 ± 2.5	2850 ± 150	6 ± 2
PLA Rapido Matte	≤30％	/	+	+	+	58℃	/	39 ± 3	2400 ± 200	3 ± 1	77.5 ± 2.5	2200 ± 200	7.5 ± 1.5
UltraPA	≤15％	/	++	++	++	77.8℃	73.1℃	86.15 ± 0.56	3609.22 ± 153.31	11.68 ± 3.36	121.47 ± 3.14	3314.03 ±181.88	5.78 ± 0.30