Add Q1

resources/profiles/QIDITechnology.ini

@@ -14,6 +14,15 @@ changelog_url = https://qidi3d.com/pages/software-firmware
 # also the first model installed & the first nozzle installed will be activated after install.
 # Printer model name will be shown by the installation wizard.
 
+[printer_model:Q1]
+name = Q1
+variants = 0.4; 0.2; 0.6; 0.8
+technology = FFF
+family = Q
+bed_model = Q1_bed.stl
+bed_texture = Q1.svg
+default_materials = QIDI ABS Odorless @Q1 0.4 nozzle; QIDI ABS Rapido @Q1 0.4 nozzle; QIDI PLA Rapido @Q1 0.4 nozzle; QIDI PLA Rapido Matte @Q1 0.4 nozzle; QIDI PLA-CF @Q1 0.4 nozzle; Generic ABS @Q1 0.4 nozzle; Generic PLA @Q1 0.4 nozzle
+
 [printer_model:Q1 Pro]
 name = Q1 Pro
 variants = 0.4; 0.2; 0.6; 0.8
@@ -241,6 +250,11 @@ xy_contour_compensation = 0
 xy_hole_compensation = 0
 
 # Machine Print preset
+[print:*Q1*]
+inherits = *common*
+external_perimeter_acceleration = 5000
+perimeter_acceleration = 7000
+
 [print:*Q1 Pro*]
 inherits = *common*
 external_perimeter_acceleration = 5000
@@ -408,6 +422,62 @@ inherits = *0.8 nozzle*
 layer_height = 0.48
 
 # Print preset
+# Q1 0.2 nozzle Print preset
+[print:0.08mm Extra High @Q1 0.2 nozzle]
+inherits = *Q1*; *0.08mm Extra High*
+compatible_printers_condition = printer_model=="Q1" and nozzle_diameter[0]==0.2
+
+[print:0.12mm Fine @Q1 0.2 nozzle]
+inherits = *Q1*; *0.12mm Fine*
+compatible_printers_condition = printer_model=="Q1" and nozzle_diameter[0]==0.2
+
+# Q1 0.4 nozzle Print preset
+[print:0.12mm Extra High @Q1 0.4 nozzle]
+inherits = *Q1*; *0.12mm Extra High*
+compatible_printers_condition = printer_model=="Q1" and nozzle_diameter[0]==0.4
+
+[print:0.16mm High @Q1 0.4 nozzle]
+inherits = *Q1*; *0.16mm High*
+compatible_printers_condition = printer_model=="Q1" and nozzle_diameter[0]==0.4
+
+[print:0.20mm Fine @Q1 0.4 nozzle]
+inherits = *Q1*; *0.20mm Fine*
+compatible_printers_condition = printer_model=="Q1" and nozzle_diameter[0]==0.4
+
+[print:0.20mm Strength @Q1 0.4 nozzle]
+inherits = *Q1*; *0.20mm Strength*
+compatible_printers_condition = printer_model=="Q1" and nozzle_diameter[0]==0.4
+
+[print:0.24mm Quick @Q1 0.4 nozzle]
+inherits = *Q1*; *0.24mm Quick*
+compatible_printers_condition = printer_model=="Q1" and nozzle_diameter[0]==0.4
+
+# Q1 0.6 nozzle Print preset
+[print:0.24mm High @Q1 0.6 nozzle]
+inherits = *Q1*; *0.24mm High*
+compatible_printers_condition = printer_model=="Q1" and nozzle_diameter[0]==0.6
+
+[print:0.30mm Fine @Q1 0.6 nozzle]
+inherits = *Q1*; *0.30mm Fine*
+compatible_printers_condition = printer_model=="Q1" and nozzle_diameter[0]==0.6
+
+[print:0.36mm Fine @Q1 0.6 nozzle]
+inherits = *Q1*; *0.36mm Quick*
+compatible_printers_condition = printer_model=="Q1" and nozzle_diameter[0]==0.6
+
+# Q1 0.8 nozzle Print preset
+[print:0.32mm High @Q1 0.8 nozzle]
+inherits = *Q1*; *0.32mm High*
+compatible_printers_condition = printer_model=="Q1" and nozzle_diameter[0]==0.8
+
+[print:0.40mm Fine @Q1 0.8 nozzle]
+inherits = *Q1*; *0.40mm Fine*
+compatible_printers_condition = printer_model=="Q1" and nozzle_diameter[0]==0.8
+
+[print:0.48mm Fine @Q1 0.8 nozzle]
+inherits = *Q1*; *0.48mm Quick*
+compatible_printers_condition = printer_model=="Q1" and nozzle_diameter[0]==0.8
+
 # Q1 Pro 0.2 nozzle Print preset
 [print:0.08mm Extra High @Q1 Pro 0.2 nozzle]
 inherits = *Q1 Pro*; *0.08mm Extra High*
@@ -1050,6 +1120,426 @@ filament_vendor = Generic
 first_layer_temperature = 230
 temperature = 230
 
+# Q1 0.2 nozzle QIDI filament preset
+[filament:QIDI ABS Odorless @Q1 0.2 nozzle]
+inherits = *QIDI ABS Odorless*
+filament_max_volumetric_speed = 2
+temperature = 260
+volume_temperature = 0
+compatible_printers_condition = printer_model=="Q1" and nozzle_diameter[0]==0.2
+
+[filament:QIDI ABS Rapido @Q1 0.2 nozzle]
+inherits = *QIDI ABS Rapido*
+filament_max_volumetric_speed = 2
+temperature = 260
+volume_temperature = 0
+compatible_printers_condition = printer_model=="Q1" and nozzle_diameter[0]==0.2
+
+[filament:QIDI ASA @Q1 0.2 nozzle]
+inherits = *QIDI ASA*
+filament_max_volumetric_speed = 2
+temperature = 255
+volume_temperature = 0
+compatible_printers_condition = printer_model=="Q1" and nozzle_diameter[0]==0.2
+
+[filament:QIDI PETG-Tough @Q1 0.2 nozzle]
+inherits = *QIDI PETG-Tough*
+filament_max_volumetric_speed = 1
+compatible_printers_condition = printer_model=="Q1" and nozzle_diameter[0]==0.2
+
+[filament:QIDI PLA Rapido @Q1 0.2 nozzle]
+inherits = *QIDI PLA Rapido*
+advance_pressure = 0.042
+filament_max_volumetric_speed = 2
+temperature = 210
+compatible_printers_condition = printer_model=="Q1" and nozzle_diameter[0]==0.2
+
+[filament:QIDI PLA Rapido Matte @Q1 0.2 nozzle]
+inherits = *QIDI PLA Rapido Matte*
+advance_pressure = 0.042
+filament_max_volumetric_speed = 2
+temperature = 210
+compatible_printers_condition = printer_model=="Q1" and nozzle_diameter[0]==0.2
+
+# Q1 0.2 nozzle Generic filament preset
+[filament:Generic ABS @Q1 0.2 nozzle]
+inherits = *Generic ABS*
+filament_max_volumetric_speed = 2
+temperature = 250
+compatible_printers_condition = printer_model=="Q1" and nozzle_diameter[0]==0.2
+
+[filament:Generic PETG @Q1 0.2 nozzle]
+inherits = *Generic PETG*
+filament_max_volumetric_speed = 1
+compatible_printers_condition = printer_model=="Q1" and nozzle_diameter[0]==0.2
+
+[filament:Generic PLA @Q1 0.2 nozzle]
+inherits = *Generic PLA*
+advance_pressure = 0.042
+filament_max_volumetric_speed = 2
+temperature = 210
+compatible_printers_condition = printer_model=="Q1" and nozzle_diameter[0]==0.2
+
+# Q1 0.4 nozzle QIDI filament preset
+[filament:QIDI ABS Odorless @Q1 0.4 nozzle]
+inherits = *QIDI ABS Odorless*
+advance_pressure = 0.035
+temperature = 260
+volume_temperature = 0
+compatible_printers_condition = printer_model=="Q1" and nozzle_diameter[0]==0.4
+
+[filament:QIDI ABS Rapido @Q1 0.4 nozzle]
+inherits = *QIDI ABS Rapido*
+advance_pressure = 0.035
+filament_max_volumetric_speed = 24.5
+temperature = 260
+volume_temperature = 0
+compatible_printers_condition = printer_model=="Q1" and nozzle_diameter[0]==0.4
+
+[filament:QIDI ABS-GF @Q1 0.4 nozzle]
+inherits = *QIDI ABS-GF*
+advance_pressure = 0.035
+filament_max_volumetric_speed = 22
+first_layer_temperature = 260
+temperature = 260
+volume_temperature = 0
+compatible_printers_condition = printer_model=="Q1" and nozzle_diameter[0]==0.4
+
+[filament:QIDI ASA @Q1 0.4 nozzle]
+inherits = *QIDI ASA*
+advance_pressure = 0.035
+temperature = 255
+volume_temperature = 0
+compatible_printers_condition = printer_model=="Q1" and nozzle_diameter[0]==0.4
+
+[filament:QIDI ASA-Aero @Q1 0.4 nozzle]
+inherits = *QIDI ASA-Aero*
+temperature = 260
+volume_temperature = 0
+compatible_printers_condition = printer_model=="Q1" and nozzle_diameter[0]==0.4
+
+[filament:QIDI PA12-CF @Q1 0.4 nozzle]
+inherits = *QIDI PA12-CF*
+advance_pressure = 0.035
+filament_max_volumetric_speed = 13
+first_layer_temperature = 280
+temperature = 280
+compatible_printers_condition = printer_model=="Q1" and nozzle_diameter[0]==0.4
+
+[filament:QIDI PAHT-CF @Q1 0.4 nozzle]
+inherits = *QIDI PAHT-CF*
+advance_pressure = 0.032
+first_layer_temperature = 300
+temperature = 300
+compatible_printers_condition = printer_model=="Q1" and nozzle_diameter[0]==0.4
+
+[filament:QIDI PC/ABS-FR @Q1 0.4 nozzle]
+inherits = *QIDI PC/ABS-FR*
+advance_pressure = 0.082
+volume_temperature = 0
+compatible_printers_condition = printer_model=="Q1" and nozzle_diameter[0]==0.4
+
+[filament:QIDI PET-CF @Q1 0.4 nozzle]
+inherits = *QIDI PET-CF*
+advance_pressure = 0.032
+filament_max_volumetric_speed = 15
+first_layer_temperature = 280
+temperature = 280
+compatible_printers_condition = printer_model=="Q1" and nozzle_diameter[0]==0.4
+
+[filament:QIDI PETG-Tough @Q1 0.4 nozzle]
+inherits = *QIDI PETG-Tough*
+advance_pressure = 0.086
+filament_max_volumetric_speed = 13
+compatible_printers_condition = printer_model=="Q1" and nozzle_diameter[0]==0.4
+
+[filament:QIDI PLA Rapido @Q1 0.4 nozzle]
+inherits = *QIDI PLA Rapido*
+advance_pressure = 0.042
+filament_max_volumetric_speed = 24.5
+temperature = 210
+compatible_printers_condition = printer_model=="Q1" and nozzle_diameter[0]==0.4
+
+[filament:QIDI PLA Rapido Matte @Q1 0.4 nozzle]
+inherits = *QIDI PLA Rapido Matte*
+advance_pressure = 0.042
+filament_max_volumetric_speed = 24.5
+temperature = 210
+compatible_printers_condition = printer_model=="Q1" and nozzle_diameter[0]==0.4
+
+[filament:QIDI PLA-CF @Q1 0.4 nozzle]
+inherits = *QIDI PLA-CF*
+advance_pressure = 0.034
+extrusion_multiplier = 0.93
+filament_max_volumetric_speed = 15
+first_layer_temperature = 220
+temperature = 220
+compatible_printers_condition = printer_model=="Q1" and nozzle_diameter[0]==0.4
+
+[filament:QIDI UltraPA @Q1 0.4 nozzle]
+inherits = *QIDI UltraPA*
+filament_max_volumetric_speed = 4
+compatible_printers_condition = printer_model=="Q1" and nozzle_diameter[0]==0.4
+
+# Q1 0.4 nozzle Generic filament preset
+[filament:Generic ABS @Q1 0.4 nozzle]
+inherits = *Generic ABS*
+temperature = 250
+compatible_printers_condition = printer_model=="Q1" and nozzle_diameter[0]==0.4
+
+[filament:Generic PETG @Q1 0.4 nozzle]
+inherits = *Generic PETG*
+advance_pressure = 0.086
+compatible_printers_condition = printer_model=="Q1" and nozzle_diameter[0]==0.4
+
+[filament:Generic PLA @Q1 0.4 nozzle]
+inherits = *Generic PLA*
+advance_pressure = 0.042
+temperature = 210
+compatible_printers_condition = printer_model=="Q1" and nozzle_diameter[0]==0.4
+
+[filament:Generic TPU 95A @Q1 0.4 nozzle]
+inherits = *Generic TPU 95A*
+compatible_printers_condition = printer_model=="Q1" and nozzle_diameter[0]==0.4
+
+# Q1 0.6 nozzle QIDI filament preset
+[filament:QIDI ABS Odorless @Q1 0.6 nozzle]
+inherits = *QIDI ABS Odorless*
+advance_pressure = 0.014
+filament_max_volumetric_speed = 24.5
+temperature = 250
+volume_temperature = 0
+compatible_printers_condition = printer_model=="Q1" and nozzle_diameter[0]==0.6
+
+[filament:QIDI ABS Rapido @Q1 0.6 nozzle]
+inherits = *QIDI ABS Rapido*
+advance_pressure = 0.014
+filament_max_volumetric_speed = 24.5
+temperature = 250
+volume_temperature = 0
+compatible_printers_condition = printer_model=="Q1" and nozzle_diameter[0]==0.6
+
+[filament:QIDI ABS-GF @Q1 0.6 nozzle]
+inherits = *QIDI ABS-GF*
+filament_max_volumetric_speed = 22
+first_layer_temperature = 260
+temperature = 260
+volume_temperature = 0
+compatible_printers_condition = printer_model=="Q1" and nozzle_diameter[0]==0.6
+
+[filament:QIDI ASA @Q1 0.6 nozzle]
+inherits = *QIDI ASA*
+advance_pressure = 0.014
+filament_max_volumetric_speed = 13
+temperature = 255
+volume_temperature = 0
+compatible_printers_condition = printer_model=="Q1" and nozzle_diameter[0]==0.6
+
+[filament:QIDI PA12-CF @Q1 0.6 nozzle]
+inherits = *QIDI PA12-CF*
+advance_pressure = 0.035
+filament_max_volumetric_speed = 13
+first_layer_temperature = 280
+temperature = 280
+compatible_printers_condition = printer_model=="Q1" and nozzle_diameter[0]==0.6
+
+[filament:QIDI PAHT-CF @Q1 0.6 nozzle]
+inherits = *QIDI PAHT-CF*
+advance_pressure = 0.032
+first_layer_temperature = 300
+temperature = 300
+compatible_printers_condition = printer_model=="Q1" and nozzle_diameter[0]==0.6
+
+[filament:QIDI PC/ABS-FR @Q1 0.6 nozzle]
+inherits = *QIDI PC/ABS-FR*
+advance_pressure = 0.082
+volume_temperature = 0
+compatible_printers_condition = printer_model=="Q1" and nozzle_diameter[0]==0.6
+
+[filament:QIDI PET-CF @Q1 0.6 nozzle]
+inherits = *QIDI PET-CF*
+advance_pressure = 0.025
+filament_max_volumetric_speed = 15
+first_layer_temperature = 280
+temperature = 280
+compatible_printers_condition = printer_model=="Q1" and nozzle_diameter[0]==0.6
+
+[filament:QIDI PETG-Tough @Q1 0.6 nozzle]
+inherits = *QIDI PETG-Tough*
+filament_max_volumetric_speed = 13
+compatible_printers_condition = printer_model=="Q1" and nozzle_diameter[0]==0.6
+
+[filament:QIDI PLA Rapido @Q1 0.6 nozzle]
+inherits = *QIDI PLA Rapido*
+advance_pressure = 0.016
+filament_max_volumetric_speed = 24.5
+temperature = 210
+compatible_printers_condition = printer_model=="Q1" and nozzle_diameter[0]==0.6
+
+[filament:QIDI PLA Rapido Matte @Q1 0.6 nozzle]
+inherits = *QIDI PLA Rapido Matte*
+advance_pressure = 0.016
+filament_max_volumetric_speed = 24.5
+temperature = 210
+compatible_printers_condition = printer_model=="Q1" and nozzle_diameter[0]==0.6
+
+[filament:QIDI PLA-CF @Q1 0.6 nozzle]
+inherits = *QIDI PLA-CF*
+advance_pressure = 0.012
+extrusion_multiplier = 0.93
+filament_max_volumetric_speed = 15
+first_layer_temperature = 220
+temperature = 220
+compatible_printers_condition = printer_model=="Q1" and nozzle_diameter[0]==0.6
+
+[filament:QIDI UltraPA @Q1 0.6 nozzle]
+inherits = *QIDI UltraPA*
+filament_max_volumetric_speed = 4
+compatible_printers_condition = printer_model=="Q1" and nozzle_diameter[0]==0.6
+
+# Q1 0.6 nozzle Generic filament preset
+[filament:Generic ABS @Q1 0.6 nozzle]
+inherits = *Generic ABS*
+advance_pressure = 0.014
+filament_max_volumetric_speed = 24.5
+temperature = 250
+compatible_printers_condition = printer_model=="Q1" and nozzle_diameter[0]==0.6
+
+[filament:Generic PETG @Q1 0.6 nozzle]
+inherits = *Generic PETG*
+compatible_printers_condition = printer_model=="Q1" and nozzle_diameter[0]==0.6
+
+[filament:Generic PLA @Q1 0.6 nozzle]
+inherits = *Generic PLA*
+advance_pressure = 0.016
+temperature = 210
+compatible_printers_condition = printer_model=="Q1" and nozzle_diameter[0]==0.6
+
+[filament:Generic TPU 95A @Q1 0.6 nozzle]
+inherits = *Generic TPU 95A*
+compatible_printers_condition = printer_model=="Q1" and nozzle_diameter[0]==0.6
+
+# Q1 0.8 nozzle QIDI filament preset
+[filament:QIDI ABS Odorless @Q1 0.8 nozzle]
+inherits = *QIDI ABS Odorless*
+advance_pressure = 0.011
+filament_max_volumetric_speed = 24.5
+min_print_speed = 10
+temperature = 250
+volume_temperature = 0
+compatible_printers_condition = printer_model=="Q1" and nozzle_diameter[0]==0.8
+
+[filament:QIDI ABS Rapido @Q1 0.8 nozzle]
+inherits = *QIDI ABS Rapido*
+advance_pressure = 0.011
+filament_max_volumetric_speed = 24.5
+min_print_speed = 10
+temperature = 250
+volume_temperature = 0
+compatible_printers_condition = printer_model=="Q1" and nozzle_diameter[0]==0.8
+
+[filament:QIDI ABS-GF @Q1 0.8 nozzle]
+inherits = *QIDI ABS-GF*
+filament_max_volumetric_speed = 22
+first_layer_temperature = 260
+temperature = 260
+volume_temperature = 0
+compatible_printers_condition = printer_model=="Q1" and nozzle_diameter[0]==0.8
+
+[filament:QIDI ASA @Q1 0.8 nozzle]
+inherits = *QIDI ASA*
+advance_pressure = 0.011
+filament_max_volumetric_speed = 13
+min_print_speed = 10
+temperature = 255
+volume_temperature = 0
+compatible_printers_condition = printer_model=="Q1" and nozzle_diameter[0]==0.8
+
+[filament:QIDI PA12-CF @Q1 0.8 nozzle]
+inherits = *QIDI PA12-CF*
+advance_pressure = 0.035
+filament_max_volumetric_speed = 13
+first_layer_temperature = 280
+temperature = 280
+compatible_printers_condition = printer_model=="Q1" and nozzle_diameter[0]==0.8
+
+[filament:QIDI PAHT-CF @Q1 0.8 nozzle]
+inherits = *QIDI PAHT-CF*
+advance_pressure = 0.032
+first_layer_temperature = 300
+temperature = 300
+compatible_printers_condition = printer_model=="Q1" and nozzle_diameter[0]==0.8
+
+[filament:QIDI PC/ABS-FR @Q1 0.8 nozzle]
+inherits = *QIDI PC/ABS-FR*
+advance_pressure = 0.082
+volume_temperature = 0
+compatible_printers_condition = printer_model=="Q1" and nozzle_diameter[0]==0.8
+
+[filament:QIDI PET-CF @Q1 0.8 nozzle]
+inherits = *QIDI PET-CF*
+advance_pressure = 0.025
+filament_max_volumetric_speed = 15
+first_layer_temperature = 280
+temperature = 280
+compatible_printers_condition = printer_model=="Q1" and nozzle_diameter[0]==0.8
+
+[filament:QIDI PETG-Tough @Q1 0.8 nozzle]
+inherits = *QIDI PETG-Tough*
+filament_max_volumetric_speed = 13
+compatible_printers_condition = printer_model=="Q1" and nozzle_diameter[0]==0.8
+
+[filament:QIDI PLA Rapido @Q1 0.8 nozzle]
+inherits = *QIDI PLA Rapido*
+advance_pressure = 0.008
+filament_max_volumetric_speed = 24.5
+temperature = 210
+compatible_printers_condition = printer_model=="Q1" and nozzle_diameter[0]==0.8
+
+[filament:QIDI PLA Rapido Matte @Q1 0.8 nozzle]
+inherits = *QIDI PLA Rapido Matte*
+advance_pressure = 0.008
+filament_max_volumetric_speed = 24.5
+temperature = 210
+compatible_printers_condition = printer_model=="Q1" and nozzle_diameter[0]==0.8
+
+[filament:QIDI PLA-CF @Q1 0.8 nozzle]
+inherits = *QIDI PLA-CF*
+advance_pressure = 0.008
+extrusion_multiplier = 0.93
+filament_max_volumetric_speed = 18
+first_layer_temperature = 220
+temperature = 220
+compatible_printers_condition = printer_model=="Q1" and nozzle_diameter[0]==0.8
+
+[filament:QIDI UltraPA @Q1 0.8 nozzle]
+inherits = *QIDI UltraPA*
+filament_max_volumetric_speed = 4
+compatible_printers_condition = printer_model=="Q1" and nozzle_diameter[0]==0.8
+
+# Q1 0.8 nozzle Generic filament preset
+[filament:Generic ABS @Q1 0.8 nozzle]
+inherits = *Generic ABS*
+advance_pressure = 0.011
+filament_max_volumetric_speed = 24.5
+temperature = 250
+compatible_printers_condition = printer_model=="Q1" and nozzle_diameter[0]==0.8
+
+[filament:Generic PETG @Q1 0.8 nozzle]
+inherits = *Generic PETG*
+compatible_printers_condition = printer_model=="Q1" and nozzle_diameter[0]==0.8
+
+[filament:Generic PLA @Q1 0.8 nozzle]
+inherits = *Generic PLA*
+advance_pressure = 0.008
+temperature = 210
+compatible_printers_condition = printer_model=="Q1" and nozzle_diameter[0]==0.8
+
+[filament:Generic TPU 95A @Q1 0.8 nozzle]
+inherits = *Generic TPU 95A*
+temperature = 220
+compatible_printers_condition = printer_model=="Q1" and nozzle_diameter[0]==0.8
+
 # Q1 Pro 0.2 nozzle QIDI filament preset
 [filament:QIDI ABS Odorless @Q1 Pro 0.2 nozzle]
 inherits = *QIDI ABS Odorless*
@@ -2408,7 +2898,7 @@ bed_custom_model =
 bed_custom_texture = 
 bed_exclude_area = 0x0
 bed_shape = 0x0,325x0,325x325,0x325
-before_layer_gcode = ;TIMELAPSE_TAKE_FRAME
+before_layer_gcode = 
 between_objects_gcode = 
 binary_gcode = 0
 chamber_fan = 1
@@ -2419,7 +2909,7 @@ cooling_tube_retraction = 91.5
 default_filament_profile = 
 default_print_profile = 
 deretract_speed = 0
-end_gcode = M141 S0\nM104 S0\nM140 S0\nG1 E-3 F1800\nG91\nG0 Z5 F600\nG90\nG0 X0 Y0 F12000\n{if max_layer_z < max_print_height / 2}G1 Z{max_print_height / 2 + 10} F600{else}G1 Z{min(max_print_height, max_layer_z + 3)}{endif}
+end_gcode = M141 S0\nM104 S0\nM140 S0\nG1 E-3 F1800\nG0 Z{max_layer_z + 3} F600\nG0 X0 Y0 F12000\n{if max_layer_z < max_print_height / 2}G1 Z{max_print_height / 2 + 10} F600{else}G1 Z{min(max_print_height, max_layer_z + 3)}{endif}
 extra_loading_move = -2
 extruder_colour = ""
 extruder_offset = 0x0
@@ -2494,6 +2984,57 @@ wipe_device = 0
 wipe_distance = 2
 z_offset = 0
 
+# Q1 preset
+[printer:*Q1*]
+inherits = *common*
+printer_model = Q1
+autoemit_temperature_commands = 0
+bed_exclude_area = 0x0,0x0,25x240,25x245,115x245,115x240,25x240,0x0,0x0,208x240,208x245,245x245,245x240,208x240,0x0
+bed_shape = 0x0,245x0,245x245,0x245
+layer_gcode = G92 E0\n;LOG_Z
+max_print_height = 240
+retract_lift_below = 239
+start_gcode = PRINT_START BED=[first_layer_bed_temperature] HOTEND=[first_layer_temperature]\nM83\nG4 P3000\nG0 X{max((min(print_bed_max[0], first_layer_print_min[0] + 80) - 85),0)} Y{max((min(print_bed_max[1], first_layer_print_min[1] + 80) - 85),0)} Z5 F6000\nG0 Z[first_layer_height] F600\nG1 E3 F1800\nG1 X{(min(print_bed_max[0], first_layer_print_min[0] + 80))} E{85 * 0.5 * first_layer_height * nozzle_diameter[0]} F3000\nG1 Y{max((min(print_bed_max[1], first_layer_print_min[1] + 80) - 85),0) + 2} E{2 * 0.5 * first_layer_height * nozzle_diameter[0]} F3000\nG1 X{max((min(print_bed_max[0], first_layer_print_min[0] + 80) - 85),0)} E{85 * 0.5 * first_layer_height * nozzle_diameter[0]} F3000\nG1 Y{max((min(print_bed_max[1], first_layer_print_min[1] + 80) - 85),0) + 85} E{83 * 0.5 * first_layer_height * nozzle_diameter[0]} F3000\nG1 X{max((min(print_bed_max[0], first_layer_print_min[0] + 80) - 85),0) + 2} E{2 * 0.5 * first_layer_height * nozzle_diameter[0]} F3000\nG1 Y{max((min(print_bed_max[1], first_layer_print_min[1] + 80) - 85),0) + 3} E{82 * 0.5 * first_layer_height * nozzle_diameter[0]} F3000\nG1 X{max((min(print_bed_max[0], first_layer_print_min[0] + 80) - 85),0) + 3} Z0\nG1 X{max((min(print_bed_max[0], first_layer_print_min[0] + 80) - 85),0) + 6}\nG1 Z1 F600\n
+thumbnails = 160x160/PNG, 112x112/PNG
+wipe_device = 1
+
+[printer:Q1 0.2 nozzle]
+inherits = *Q1*
+default_filament_profile = Generic PLA @Q1 0.2 nozzle
+default_print_profile = 0.12mm Fine @Q1 0.2 nozzle
+max_layer_height = 0.14
+min_layer_height = 0.04
+nozzle_diameter = 0.2
+printer_variant = 0.2
+retract_length = 0.4
+
+[printer:Q1 0.4 nozzle]
+inherits = *Q1*
+default_filament_profile = Generic PLA @Q1 0.4 nozzle
+default_print_profile = 0.20mm Fine @Q1 0.4 nozzle
+retract_length = 0.8
+
+[printer:Q1 0.6 nozzle]
+inherits = *Q1*
+default_filament_profile = Generic PLA @Q1 0.6 nozzle
+default_print_profile = 0.30mm Fine @Q1 0.6 nozzle
+max_layer_height = 0.42
+min_layer_height = 0.12
+nozzle_diameter = 0.6
+printer_variant = 0.6
+retract_before_travel = 3
+retract_length = 1.4
+
+[printer:Q1 0.8 nozzle]
+inherits = *Q1*
+default_filament_profile = Generic PLA @Q1 0.8 nozzle
+default_print_profile = 0.40mm Fine @Q1 0.8 nozzle
+max_layer_height = 0.56
+min_layer_height = 0.16
+nozzle_diameter = 0.8
+printer_variant = 0.8
+retract_length = 3
+
 # Q1 Pro preset
 [printer:*Q1 Pro*]
 inherits = *common*
@@ -2502,10 +3043,11 @@ autoemit_temperature_commands = 0
 auxiliary_fan = 1
 bed_exclude_area = 0x0,0x0,25x240,25x245,115x245,115x240,25x240,0x0,0x0,208x240,208x245,245x245,245x240,208x240,0x0
 bed_shape = 0x0,245x0,245x245,0x245
+before_layer_gcode = ;TIMELAPSE_TAKE_FRAME
 chamber_temperature = 1
 layer_gcode = G92 E0\n;LOG_Z
-max_print_height = 245
+max_print_height = 240
-retract_lift_below = 244
+retract_lift_below = 239
 start_gcode = PRINT_START BED=[first_layer_bed_temperature] HOTEND=[first_layer_temperature] CHAMBER=[volume_temperature]\nM83\nG4 P3000\nG0 X{max((min(print_bed_max[0], first_layer_print_min[0] + 80) - 85),0)} Y{max((min(print_bed_max[1], first_layer_print_min[1] + 80) - 85),0)} Z5 F6000\nG0 Z[first_layer_height] F600\nG1 E3 F1800\nG1 X{(min(print_bed_max[0], first_layer_print_min[0] + 80))} E{85 * 0.5 * first_layer_height * nozzle_diameter[0]} F3000\nG1 Y{max((min(print_bed_max[1], first_layer_print_min[1] + 80) - 85),0) + 2} E{2 * 0.5 * first_layer_height * nozzle_diameter[0]} F3000\nG1 X{max((min(print_bed_max[0], first_layer_print_min[0] + 80) - 85),0)} E{85 * 0.5 * first_layer_height * nozzle_diameter[0]} F3000\nG1 Y{max((min(print_bed_max[1], first_layer_print_min[1] + 80) - 85),0) + 85} E{83 * 0.5 * first_layer_height * nozzle_diameter[0]} F3000\nG1 X{max((min(print_bed_max[0], first_layer_print_min[0] + 80) - 85),0) + 2} E{2 * 0.5 * first_layer_height * nozzle_diameter[0]} F3000\nG1 Y{max((min(print_bed_max[1], first_layer_print_min[1] + 80) - 85),0) + 3} E{82 * 0.5 * first_layer_height * nozzle_diameter[0]} F3000\nG1 X{max((min(print_bed_max[0], first_layer_print_min[0] + 80) - 85),0) + 3} Z0\nG1 X{max((min(print_bed_max[0], first_layer_print_min[0] + 80) - 85),0) + 6}\nG1 Z1 F600\n
 thumbnails = 160x160/PNG, 112x112/PNG
 wipe_device = 1

resources/profiles/QIDITechnology/Q1.svg

@@ -0,0 +1,60 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Generator: Adobe Illustrator 25.0.0, SVG Export Plug-In . SVG Version: 6.00 Build 0)  -->
+<svg version="1.1" id="图层_1" xmlns="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3.org/1999/xlink" x="0px" y="0px"
+	 width="694.5px" height="694.5px" viewBox="0 0 694.5 694.5" enable-background="new 0 0 694.5 694.5" xml:space="preserve">
+<rect fill="#FFFFFF" width="1.4" height="694.5"/>
+<rect x="693.1" y="15.7" fill="#FFFFFF" width="1.4" height="678.8"/>
+<rect x="0" y="693.1" fill="#FFFFFF" width="694.5" height="1.4"/>
+<rect x="559.1" fill="#FFFFFF" width="1.4" height="694.5"/>
+<rect x="417.4" fill="#FFFFFF" width="1.4" height="694.5"/>
+<rect x="275.7" y="15.7" fill="#FFFFFF" width="1.4" height="678.8"/>
+<rect x="133.9" y="14.2" fill="#FFFFFF" width="1.4" height="680.3"/>
+<rect x="21.1" y="0" fill="#FFFFFF" width="0.4" height="694.5"/>
+<rect x="49.4" y="0" fill="#FFFFFF" width="0.4" height="694.5"/>
+<rect x="77.8" y="14.2" fill="#FFFFFF" width="0.4" height="680.3"/>
+<rect x="106.1" y="14.2" fill="#FFFFFF" width="0.4" height="680.3"/>
+<rect x="162.8" y="15.7" fill="#FFFFFF" width="0.4" height="678.8"/>
+<rect x="191.1" y="15.7" fill="#FFFFFF" width="0.4" height="678.8"/>
+<rect x="219.5" y="15.7" fill="#FFFFFF" width="0.4" height="678.8"/>
+<rect x="247.8" y="15.7" fill="#FFFFFF" width="0.4" height="678.8"/>
+<rect x="304.5" y="15.7" fill="#FFFFFF" width="0.4" height="678.8"/>
+<rect x="332.9" y="0" fill="#FFFFFF" width="0.4" height="694.5"/>
+<rect x="361.2" y="0" fill="#FFFFFF" width="0.4" height="694.5"/>
+<rect x="389.6" y="0" fill="#FFFFFF" width="0.4" height="694.5"/>
+<rect x="446.3" y="0" fill="#FFFFFF" width="0.4" height="694.5"/>
+<rect x="474.6" y="0" fill="#FFFFFF" width="0.4" height="694.5"/>
+<rect x="502.9" y="0" fill="#FFFFFF" width="0.4" height="694.5"/>
+<rect x="531.3" y="0" fill="#FFFFFF" width="0.4" height="694.5"/>
+<rect x="588" y="0" fill="#FFFFFF" width="0.4" height="694.5"/>
+<rect x="616.3" y="15.7" fill="#FFFFFF" width="0.4" height="678.8"/>
+<rect x="644.7" y="15.7" fill="#FFFFFF" width="0.4" height="678.8"/>
+<rect x="673" y="15.7" fill="#FFFFFF" width="0.4" height="678.8"/>
+<rect x="0" y="559.1" fill="#FFFFFF" width="694.5" height="1.4"/>
+<rect x="0" y="417.4" fill="#FFFFFF" width="694.5" height="1.4"/>
+<rect x="0" y="275.7" fill="#FFFFFF" width="694.5" height="1.4"/>
+<rect x="0" y="133.9" fill="#FFFFFF" width="694.5" height="1.4"/>
+<rect x="0" y="21.1" fill="#FFFFFF" width="694.5" height="0.4"/>
+<rect x="0" y="49.4" fill="#FFFFFF" width="694.5" height="0.4"/>
+<rect x="0" y="77.8" fill="#FFFFFF" width="694.5" height="0.4"/>
+<rect x="0" y="106.1" fill="#FFFFFF" width="694.5" height="0.4"/>
+<rect x="0" y="162.8" fill="#FFFFFF" width="694.5" height="0.4"/>
+<rect x="0" y="191.1" fill="#FFFFFF" width="694.5" height="0.4"/>
+<rect x="0" y="219.5" fill="#FFFFFF" width="694.5" height="0.4"/>
+<rect x="0" y="247.8" fill="#FFFFFF" width="694.5" height="0.4"/>
+<rect x="0" y="304.5" fill="#FFFFFF" width="694.5" height="0.4"/>
+<rect x="0" y="332.9" fill="#FFFFFF" width="694.5" height="0.4"/>
+<rect x="0" y="361.2" fill="#FFFFFF" width="694.5" height="0.4"/>
+<rect x="0" y="389.6" fill="#FFFFFF" width="694.5" height="0.4"/>
+<rect x="0" y="446.3" fill="#FFFFFF" width="694.5" height="0.4"/>
+<rect x="0" y="474.6" fill="#FFFFFF" width="694.5" height="0.4"/>
+<rect x="0" y="502.9" fill="#FFFFFF" width="694.5" height="0.4"/>
+<rect x="0" y="531.3" fill="#FFFFFF" width="694.5" height="0.4"/>
+<rect x="0" y="588" fill="#FFFFFF" width="694.5" height="0.4"/>
+<rect x="0" y="616.3" fill="#FFFFFF" width="694.5" height="0.4"/>
+<rect x="0" y="644.7" fill="#FFFFFF" width="694.5" height="0.4"/>
+<rect x="0" y="673" fill="#FFFFFF" width="694.5" height="0.4"/>
+<polygon fill="#FFFFFF" points="694.5,15.7 588.1,15.7 588.1,0 589.6,0 589.6,14 694.5,14 "/>
+<polygon fill="#FFFFFF" points="327.5,15.7 69.4,15.7 69.4,0 70.9,0 70.9,14 326,14 326,0 327.5,0 "/>
+<rect x="327.5" y="0" fill="#FFFFFF" width="260.9" height="1.4"/>
+<rect x="0" y="0" fill="#FFFFFF" width="69.4" height="1.4"/>
+</svg>