Add Q1 Pro

resources/profiles/QIDITechnology.ini

@@ -14,6 +14,15 @@ changelog_url = https://qidi3d.com/pages/software-firmware
 # also the first model installed & the first nozzle installed will be activated after install.
 # Printer model name will be shown by the installation wizard.
 
+[printer_model:Q1 Pro]
+name = Q1 Pro
+variants = 0.4; 0.2; 0.6; 0.8
+technology = FFF
+family = Q
+bed_model = Q1 Pro_bed.stl
+bed_texture = Q1 Pro.svg
+default_materials = QIDI ABS Odorless @Q1 Pro 0.4 nozzle; QIDI ABS Rapido @Q1 Pro 0.4 nozzle; QIDI PLA Rapido @Q1 Pro 0.4 nozzle; QIDI PLA Rapido Matte @Q1 Pro 0.4 nozzle; QIDI PLA-CF @Q1 Pro 0.4 nozzle; Generic ABS @Q1 Pro 0.4 nozzle; Generic PLA @Q1 Pro 0.4 nozzle
+
 [printer_model:X-MAX 3]
 name = X-MAX 3
 variants = 0.4; 0.2; 0.6; 0.8
@@ -21,7 +30,7 @@ technology = FFF
 family = X 3
 bed_model = X-MAX 3_bed.stl
 bed_texture = X-MAX 3.svg
-default_materials = QIDI ABS Odorless @X-MAX 3 0.4 nozzle; QIDI ABS Rapido @X-MAX 3 0.4 nozzle; QIDI PLA Rapido @X-MAX 3 0.4 nozzle; QIDI PLA Rapido Matte @X-MAX 3 0.4 nozzle; Generic ABS @X-MAX 3 0.4 nozzle; Generic PLA @X-MAX 3 0.4 nozzle
+default_materials = QIDI ABS Odorless @X-MAX 3 0.4 nozzle; QIDI ABS Rapido @X-MAX 3 0.4 nozzle; QIDI PLA Rapido @X-MAX 3 0.4 nozzle; QIDI PLA Rapido Matte @X-MAX 3 0.4 nozzle; QIDI PLA-CF @X-MAX 3 0.4 nozzle; Generic ABS @X-MAX 3 0.4 nozzle; Generic PLA @X-MAX 3 0.4 nozzle
 
 [printer_model:X-Plus 3]
 name = X-Plus 3
@@ -30,7 +39,7 @@ technology = FFF
 family = X 3
 bed_model = X-Plus 3_bed.stl
 bed_texture = X-Plus 3.svg
-default_materials = QIDI ABS Odorless @X-Plus 3 0.4 nozzle; QIDI ABS Rapido @X-Plus 3 0.4 nozzle; QIDI PLA Rapido @X-Plus 3 0.4 nozzle; QIDI PLA Rapido Matte @X-Plus 3 0.4 nozzle; Generic ABS @X-Plus 3 0.4 nozzle; Generic PLA @X-Plus 3 0.4 nozzle
+default_materials = QIDI ABS Odorless @X-Plus 3 0.4 nozzle; QIDI ABS Rapido @X-Plus 3 0.4 nozzle; QIDI PLA Rapido @X-Plus 3 0.4 nozzle; QIDI PLA Rapido Matte @X-Plus 3 0.4 nozzle; QIDI PLA-CF @X-Plus 3 0.4 nozzle; Generic ABS @X-Plus 3 0.4 nozzle; Generic PLA @X-Plus 3 0.4 nozzle
 
 [printer_model:X-smart 3]
 name = X-smart 3
@@ -39,7 +48,7 @@ technology = FFF
 family = X 3
 bed_model = X-smart 3_bed.stl
 bed_texture = X-smart 3.svg
-default_materials = QIDI ABS Odorless @X-smart 3 0.4 nozzle;QIDI ABS Rapido @X-smart 3 0.4 nozzle; QIDI PLA Rapido @X-smart 3 0.4 nozzle; QIDI PLA Rapido Matte @X-smart 3 0.4 nozzle; Generic ABS @X-smart 3 0.4 nozzle; Generic PLA @X-smart 3 0.4 nozzle
+default_materials = QIDI ABS Odorless @X-smart 3 0.4 nozzle;QIDI ABS Rapido @X-smart 3 0.4 nozzle; QIDI PLA Rapido @X-smart 3 0.4 nozzle; QIDI PLA Rapido Matte @X-smart 3 0.4 nozzle; QIDI PLA-CF @X-smart 3 0.4 nozzle; Generic ABS @X-smart 3 0.4 nozzle; Generic PLA @X-smart 3 0.4 nozzle
 
 # All presets starting with asterisk, for example *common*, are intermediate and they will
 # not make it into the user interface.
@@ -230,6 +239,11 @@ xy_contour_compensation = 0
 xy_hole_compensation = 0
 
 # Machine Print preset
+[print:*Q1 Pro*]
+inherits = *common*
+external_perimeter_acceleration = 5000
+perimeter_acceleration = 7000
+
 [print:*X-MAX 3*]
 inherits = *common*
 
@@ -392,6 +406,62 @@ inherits = *0.8 nozzle*
 layer_height = 0.48
 
 # Print preset
+# Q1 Pro 0.2 nozzle Print preset
+[print:0.08mm Extra High @Q1 Pro 0.2 nozzle]
+inherits = *Q1 Pro*; *0.08mm Extra High*
+compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.2
+
+[print:0.12mm Fine @Q1 Pro 0.2 nozzle]
+inherits = *Q1 Pro*; *0.12mm Fine*
+compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.2
+
+# Q1 Pro 0.4 nozzle Print preset
+[print:0.12mm Extra High @Q1 Pro 0.4 nozzle]
+inherits = *Q1 Pro*; *0.12mm Extra High*
+compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.4
+
+[print:0.16mm High @Q1 Pro 0.4 nozzle]
+inherits = *Q1 Pro*; *0.16mm High*
+compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.4
+
+[print:0.20mm Fine @Q1 Pro 0.4 nozzle]
+inherits = *Q1 Pro*; *0.20mm Fine*
+compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.4
+
+[print:0.20mm Strength @Q1 Pro 0.4 nozzle]
+inherits = *Q1 Pro*; *0.20mm Strength*
+compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.4
+
+[print:0.24mm Quick @Q1 Pro 0.4 nozzle]
+inherits = *Q1 Pro*; *0.24mm Quick*
+compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.4
+
+# Q1 Pro 0.6 nozzle Print preset
+[print:0.24mm High @Q1 Pro 0.6 nozzle]
+inherits = *Q1 Pro*; *0.24mm High*
+compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.6
+
+[print:0.30mm Fine @Q1 Pro 0.6 nozzle]
+inherits = *Q1 Pro*; *0.30mm Fine*
+compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.6
+
+[print:0.36mm Fine @Q1 Pro 0.6 nozzle]
+inherits = *Q1 Pro*; *0.36mm Quick*
+compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.6
+
+# Q1 Pro 0.8 nozzle Print preset
+[print:0.32mm High @Q1 Pro 0.8 nozzle]
+inherits = *Q1 Pro*; *0.32mm High*
+compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.8
+
+[print:0.40mm Fine @Q1 Pro 0.8 nozzle]
+inherits = *Q1 Pro*; *0.40mm Fine*
+compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.8
+
+[print:0.48mm Fine @Q1 Pro 0.8 nozzle]
+inherits = *Q1 Pro*; *0.48mm Quick*
+compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.8
+
 # X-MAX 3 0.2 nozzle Print preset
 [print:0.08mm Extra High @X-MAX 3 0.2 nozzle]
 inherits = *X-MAX 3*; *0.08mm Extra High*
@@ -634,7 +704,7 @@ overhang_fan_speed_0 = 0
 overhang_fan_speed_1 = 0
 overhang_fan_speed_2 = 0
 overhang_fan_speed_3 = 0
-slowdown_below_layer_time = 5
+slowdown_below_layer_time = 8
 smooth_time = 0.03
 start_filament_gcode = "; Filament gcode\n{if (enable_advance_pressure[0] == true)}M900 K[advance_pressure]{else}M900 K0{endif} T[smooth_time]\n"
 temperature = 220
@@ -703,6 +773,7 @@ max_fan_speed = 20
 min_fan_speed = 20
 overhang_fan_speed_0 = 100
 overhang_fan_speed_1 = 100
+slowdown_below_layer_time = 5
 temperature = 270
 volume_temperature = 55
 
@@ -772,7 +843,6 @@ fan_below_layer_time = 10
 filament_colour = #696969
 filament_density = 1.09
 filament_max_volumetric_speed = 10
-filament_travel_ramping_lift = 0
 filament_type = PA12-CF
 first_layer_bed_temperature = 80
 first_layer_temperature = 290
@@ -796,7 +866,6 @@ fan_below_layer_time = 10
 filament_colour = #4F4F4F
 filament_density = 1.20
 filament_max_volumetric_speed = 14
-filament_travel_ramping_lift = 0
 filament_type = PAHT-CF
 first_layer_bed_temperature = 80
 first_layer_temperature = 310
@@ -842,7 +911,6 @@ fan_below_layer_time = 10
 filament_colour = #323232
 filament_density = 1.30
 filament_max_volumetric_speed = 12
-filament_travel_ramping_lift = 0
 filament_type = PET-CF
 first_layer_bed_temperature = 80
 first_layer_temperature = 320
@@ -873,7 +941,6 @@ max_fan_speed = 40
 min_fan_speed = 10
 overhang_fan_speed_0 = 100
 overhang_fan_speed_1 = 100
-slowdown_below_layer_time = 8
 temperature = 250
 
 [filament:*QIDI PLA Rapido*]
@@ -885,6 +952,17 @@ filament_colour = #0073E6
 filament_density = 1.42
 filament_max_volumetric_speed = 21
 
+[filament:*QIDI PLA-CF*]
+inherits = *common*
+advance_pressure = 0.02
+extrusion_multiplier = 0.96
+filament_colour = #27408B
+filament_density = 1.25
+filament_max_volumetric_speed = 9
+filament_type = PLA-CF
+first_layer_temperature = 230
+temperature = 230
+
 [filament:*QIDI UltraPA*]
 inherits = *common*
 advance_pressure = 0.03
@@ -945,7 +1023,7 @@ max_fan_speed = 40
 min_fan_speed = 10
 overhang_fan_speed_0 = 100
 overhang_fan_speed_1 = 100
-slowdown_below_layer_time = 4
+slowdown_below_layer_time = 12
 temperature = 250
 
 [filament:*Generic PLA*]
@@ -965,9 +1043,412 @@ filament_max_volumetric_speed = 4
 filament_type = TPU
 filament_vendor = Generic
 first_layer_temperature = 230
-slowdown_below_layer_time = 8
 temperature = 230
 
+# Q1 Pro 0.2 nozzle QIDI filament preset
+[filament:QIDI ABS Odorless @Q1 Pro 0.2 nozzle]
+inherits = *QIDI ABS Odorless*
+filament_max_volumetric_speed = 2
+temperature = 260
+volume_temperature = 0
+compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.2
+
+[filament:QIDI ABS Rapido @Q1 Pro 0.2 nozzle]
+inherits = *QIDI ABS Rapido*
+filament_max_volumetric_speed = 2
+temperature = 260
+volume_temperature = 0
+compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.2
+
+[filament:QIDI ASA @Q1 Pro 0.2 nozzle]
+inherits = *QIDI ASA*
+filament_max_volumetric_speed = 2
+temperature = 255
+volume_temperature = 0
+compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.2
+
+[filament:QIDI PETG-Tough @Q1 Pro 0.2 nozzle]
+inherits = *QIDI PETG-Tough*
+filament_max_volumetric_speed = 1
+compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.2
+
+[filament:QIDI PLA Rapido @Q1 Pro 0.2 nozzle]
+inherits = *QIDI PLA Rapido*
+advance_pressure = 0.042
+filament_max_volumetric_speed = 2
+temperature = 210
+compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.2
+
+[filament:QIDI PLA Rapido Matte @Q1 Pro 0.2 nozzle]
+inherits = *QIDI PLA Rapido Matte*
+advance_pressure = 0.042
+filament_max_volumetric_speed = 2
+temperature = 210
+compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.2
+
+# Q1 Pro 0.2 nozzle Generic filament preset
+[filament:Generic ABS @Q1 Pro 0.2 nozzle]
+inherits = *Generic ABS*
+filament_max_volumetric_speed = 2
+temperature = 250
+compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.2
+
+[filament:Generic PETG @Q1 Pro 0.2 nozzle]
+inherits = *Generic PETG*
+filament_max_volumetric_speed = 1
+compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.2
+
+[filament:Generic PLA @Q1 Pro 0.2 nozzle]
+inherits = *Generic PLA*
+advance_pressure = 0.042
+filament_max_volumetric_speed = 2
+temperature = 210
+compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.2
+
+# Q1 Pro 0.4 nozzle QIDI filament preset
+[filament:QIDI ABS Odorless @Q1 Pro 0.4 nozzle]
+inherits = *QIDI ABS Odorless*
+advance_pressure = 0.035
+temperature = 260
+compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.4
+
+[filament:QIDI ABS Rapido @Q1 Pro 0.4 nozzle]
+inherits = *QIDI ABS Rapido*
+advance_pressure = 0.035
+filament_max_volumetric_speed = 24.5
+temperature = 260
+compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.4
+
+[filament:QIDI ABS-GF @Q1 Pro 0.4 nozzle]
+inherits = *QIDI ABS-GF*
+advance_pressure = 0.035
+filament_max_volumetric_speed = 22
+first_layer_temperature = 260
+temperature = 260
+compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.4
+
+[filament:QIDI ASA @Q1 Pro 0.4 nozzle]
+inherits = *QIDI ASA*
+advance_pressure = 0.035
+temperature = 255
+compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.4
+
+[filament:QIDI ASA-Aero @Q1 Pro 0.4 nozzle]
+inherits = *QIDI ASA-Aero*
+temperature = 260
+compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.4
+
+[filament:QIDI PA12-CF @Q1 Pro 0.4 nozzle]
+inherits = *QIDI PA12-CF*
+advance_pressure = 0.035
+filament_max_volumetric_speed = 13
+first_layer_temperature = 280
+temperature = 280
+compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.4
+
+[filament:QIDI PAHT-CF @Q1 Pro 0.4 nozzle]
+inherits = *QIDI PAHT-CF*
+advance_pressure = 0.032
+first_layer_temperature = 300
+temperature = 300
+compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.4
+
+[filament:QIDI PC/ABS-FR @Q1 Pro 0.4 nozzle]
+inherits = *QIDI PC/ABS-FR*
+advance_pressure = 0.082
+compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.4
+
+[filament:QIDI PET-CF @Q1 Pro 0.4 nozzle]
+inherits = *QIDI PET-CF*
+advance_pressure = 0.032
+filament_max_volumetric_speed = 15
+first_layer_temperature = 280
+temperature = 280
+compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.4
+
+[filament:QIDI PETG-Tough @Q1 Pro 0.4 nozzle]
+inherits = *QIDI PETG-Tough*
+advance_pressure = 0.086
+filament_max_volumetric_speed = 13
+compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.4
+
+[filament:QIDI PLA Rapido @Q1 Pro 0.4 nozzle]
+inherits = *QIDI PLA Rapido*
+advance_pressure = 0.042
+filament_max_volumetric_speed = 24.5
+temperature = 210
+compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.4
+
+[filament:QIDI PLA Rapido Matte @Q1 Pro 0.4 nozzle]
+inherits = *QIDI PLA Rapido Matte*
+advance_pressure = 0.042
+filament_max_volumetric_speed = 24.5
+temperature = 210
+compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.4
+
+[filament:QIDI PLA-CF @Q1 Pro 0.4 nozzle]
+inherits = *QIDI PLA-CF*
+advance_pressure = 0.034
+extrusion_multiplier = 0.93
+filament_max_volumetric_speed = 15
+first_layer_temperature = 220
+temperature = 220
+compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.4
+
+[filament:QIDI UltraPA @Q1 Pro 0.4 nozzle]
+inherits = *QIDI UltraPA*
+filament_max_volumetric_speed = 4
+compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.4
+
+# Q1 Pro 0.4 nozzle Generic filament preset
+[filament:Generic ABS @Q1 Pro 0.4 nozzle]
+inherits = *Generic ABS*
+temperature = 250
+compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.4
+
+[filament:Generic PETG @Q1 Pro 0.4 nozzle]
+inherits = *Generic PETG*
+advance_pressure = 0.086
+compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.4
+
+[filament:Generic PLA @Q1 Pro 0.4 nozzle]
+inherits = *Generic PLA*
+advance_pressure = 0.042
+temperature = 210
+compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.4
+
+[filament:Generic TPU 95A @Q1 Pro 0.4 nozzle]
+inherits = *Generic TPU 95A*
+compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.4
+
+# Q1 Pro 0.6 nozzle QIDI filament preset
+[filament:QIDI ABS Odorless @Q1 Pro 0.6 nozzle]
+inherits = *QIDI ABS Odorless*
+advance_pressure = 0.014
+filament_max_volumetric_speed = 24.5
+temperature = 250
+compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.6
+
+[filament:QIDI ABS Rapido @Q1 Pro 0.6 nozzle]
+inherits = *QIDI ABS Rapido*
+advance_pressure = 0.014
+filament_max_volumetric_speed = 24.5
+temperature = 250
+compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.6
+
+[filament:QIDI ABS-GF @Q1 Pro 0.6 nozzle]
+inherits = *QIDI ABS-GF*
+filament_max_volumetric_speed = 22
+first_layer_temperature = 260
+temperature = 260
+compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.6
+
+[filament:QIDI ASA @Q1 Pro 0.6 nozzle]
+inherits = *QIDI ASA*
+advance_pressure = 0.014
+filament_max_volumetric_speed = 13
+temperature = 255
+compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.6
+
+[filament:QIDI PA12-CF @Q1 Pro 0.6 nozzle]
+inherits = *QIDI PA12-CF*
+advance_pressure = 0.035
+filament_max_volumetric_speed = 13
+first_layer_temperature = 280
+temperature = 280
+compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.6
+
+[filament:QIDI PAHT-CF @Q1 Pro 0.6 nozzle]
+inherits = *QIDI PAHT-CF*
+advance_pressure = 0.032
+first_layer_temperature = 300
+temperature = 300
+compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.6
+
+[filament:QIDI PC/ABS-FR @Q1 Pro 0.6 nozzle]
+inherits = *QIDI PC/ABS-FR*
+advance_pressure = 0.082
+compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.6
+
+[filament:QIDI PET-CF @Q1 Pro 0.6 nozzle]
+inherits = *QIDI PET-CF*
+advance_pressure = 0.025
+filament_max_volumetric_speed = 15
+first_layer_temperature = 280
+temperature = 280
+compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.6
+
+[filament:QIDI PETG-Tough @Q1 Pro 0.6 nozzle]
+inherits = *QIDI PETG-Tough*
+filament_max_volumetric_speed = 13
+compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.6
+
+[filament:QIDI PLA Rapido @Q1 Pro 0.6 nozzle]
+inherits = *QIDI PLA Rapido*
+advance_pressure = 0.016
+filament_max_volumetric_speed = 24.5
+temperature = 210
+compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.6
+
+[filament:QIDI PLA Rapido Matte @Q1 Pro 0.6 nozzle]
+inherits = *QIDI PLA Rapido Matte*
+advance_pressure = 0.016
+filament_max_volumetric_speed = 24.5
+temperature = 210
+compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.6
+
+[filament:QIDI PLA-CF @Q1 Pro 0.6 nozzle]
+inherits = *QIDI PLA-CF*
+advance_pressure = 0.012
+extrusion_multiplier = 0.93
+filament_max_volumetric_speed = 15
+first_layer_temperature = 220
+temperature = 220
+compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.6
+
+[filament:QIDI UltraPA @Q1 Pro 0.6 nozzle]
+inherits = *QIDI UltraPA*
+filament_max_volumetric_speed = 4
+compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.6
+
+# Q1 Pro 0.6 nozzle Generic filament preset
+[filament:Generic ABS @Q1 Pro 0.6 nozzle]
+inherits = *Generic ABS*
+advance_pressure = 0.014
+filament_max_volumetric_speed = 24.5
+temperature = 250
+compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.6
+
+[filament:Generic PETG @Q1 Pro 0.6 nozzle]
+inherits = *Generic PETG*
+compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.6
+
+[filament:Generic PLA @Q1 Pro 0.6 nozzle]
+inherits = *Generic PLA*
+advance_pressure = 0.016
+temperature = 210
+compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.6
+
+[filament:Generic TPU 95A @Q1 Pro 0.6 nozzle]
+inherits = *Generic TPU 95A*
+compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.6
+
+# Q1 Pro 0.8 nozzle QIDI filament preset
+[filament:QIDI ABS Odorless @Q1 Pro 0.8 nozzle]
+inherits = *QIDI ABS Odorless*
+advance_pressure = 0.011
+filament_max_volumetric_speed = 24.5
+min_print_speed = 10
+temperature = 250
+compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.8
+
+[filament:QIDI ABS Rapido @Q1 Pro 0.8 nozzle]
+inherits = *QIDI ABS Rapido*
+advance_pressure = 0.011
+filament_max_volumetric_speed = 24.5
+min_print_speed = 10
+temperature = 250
+compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.8
+
+[filament:QIDI ABS-GF @Q1 Pro 0.8 nozzle]
+inherits = *QIDI ABS-GF*
+filament_max_volumetric_speed = 22
+first_layer_temperature = 260
+temperature = 260
+compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.8
+
+[filament:QIDI ASA @Q1 Pro 0.8 nozzle]
+inherits = *QIDI ASA*
+advance_pressure = 0.011
+filament_max_volumetric_speed = 13
+min_print_speed = 10
+temperature = 255
+compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.8
+
+[filament:QIDI PA12-CF @Q1 Pro 0.8 nozzle]
+inherits = *QIDI PA12-CF*
+advance_pressure = 0.035
+filament_max_volumetric_speed = 13
+first_layer_temperature = 280
+temperature = 280
+compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.8
+
+[filament:QIDI PAHT-CF @Q1 Pro 0.8 nozzle]
+inherits = *QIDI PAHT-CF*
+advance_pressure = 0.032
+first_layer_temperature = 300
+temperature = 300
+compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.8
+
+[filament:QIDI PC/ABS-FR @Q1 Pro 0.8 nozzle]
+inherits = *QIDI PC/ABS-FR*
+advance_pressure = 0.082
+compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.8
+
+[filament:QIDI PET-CF @Q1 Pro 0.8 nozzle]
+inherits = *QIDI PET-CF*
+advance_pressure = 0.025
+filament_max_volumetric_speed = 15
+first_layer_temperature = 280
+temperature = 280
+compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.8
+
+[filament:QIDI PETG-Tough @Q1 Pro 0.8 nozzle]
+inherits = *QIDI PETG-Tough*
+filament_max_volumetric_speed = 13
+compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.8
+
+[filament:QIDI PLA Rapido @Q1 Pro 0.8 nozzle]
+inherits = *QIDI PLA Rapido*
+advance_pressure = 0.008
+filament_max_volumetric_speed = 24.5
+temperature = 210
+compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.8
+
+[filament:QIDI PLA Rapido Matte @Q1 Pro 0.8 nozzle]
+inherits = *QIDI PLA Rapido Matte*
+advance_pressure = 0.008
+filament_max_volumetric_speed = 24.5
+temperature = 210
+compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.8
+
+[filament:QIDI PLA-CF @Q1 Pro 0.8 nozzle]
+inherits = *QIDI PLA-CF*
+advance_pressure = 0.008
+extrusion_multiplier = 0.93
+filament_max_volumetric_speed = 18
+first_layer_temperature = 220
+temperature = 220
+compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.8
+
+[filament:QIDI UltraPA @Q1 Pro 0.8 nozzle]
+inherits = *QIDI UltraPA*
+filament_max_volumetric_speed = 4
+compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.8
+
+# Q1 Pro 0.8 nozzle Generic filament preset
+[filament:Generic ABS @Q1 Pro 0.8 nozzle]
+inherits = *Generic ABS*
+advance_pressure = 0.011
+filament_max_volumetric_speed = 24.5
+temperature = 250
+compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.8
+
+[filament:Generic PETG @Q1 Pro 0.8 nozzle]
+inherits = *Generic PETG*
+compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.8
+
+[filament:Generic PLA @Q1 Pro 0.8 nozzle]
+inherits = *Generic PLA*
+advance_pressure = 0.008
+temperature = 210
+compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.8
+
+[filament:Generic TPU 95A @Q1 Pro 0.8 nozzle]
+inherits = *Generic TPU 95A*
+temperature = 220
+compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.8
+
 # X-MAX 3 0.2 nozzle QIDI filament preset
 [filament:QIDI ABS Odorless @X-MAX 3 0.2 nozzle]
 inherits = *QIDI ABS Odorless*
@@ -1076,6 +1557,10 @@ compatible_printers_condition = printer_model=="X-MAX 3" and nozzle_diameter[0]=
 inherits = *QIDI PLA Rapido Matte*
 compatible_printers_condition = printer_model=="X-MAX 3" and nozzle_diameter[0]==0.4
 
+[filament:QIDI PLA-CF @X-MAX 3 0.4 nozzle]
+inherits = *QIDI PLA-CF*
+compatible_printers_condition = printer_model=="X-MAX 3" and nozzle_diameter[0]==0.4
+
 [filament:QIDI UltraPA @X-MAX 3 0.4 nozzle]
 inherits = *QIDI UltraPA*
 compatible_printers_condition = printer_model=="X-MAX 3" and nozzle_diameter[0]==0.4
@@ -1146,13 +1631,16 @@ compatible_printers_condition = printer_model=="X-MAX 3" and nozzle_diameter[0]=
 [filament:QIDI PLA Rapido @X-MAX 3 0.6 nozzle]
 inherits = *QIDI PLA Rapido*
 advance_pressure = 0.016
-slowdown_below_layer_time = 6
 compatible_printers_condition = printer_model=="X-MAX 3" and nozzle_diameter[0]==0.6
 
 [filament:QIDI PLA Rapido Matte @X-MAX 3 0.6 nozzle]
 inherits = *QIDI PLA Rapido Matte*
 advance_pressure = 0.016
-slowdown_below_layer_time = 6
+compatible_printers_condition = printer_model=="X-MAX 3" and nozzle_diameter[0]==0.6
+
+[filament:QIDI PLA-CF @X-MAX 3 0.6 nozzle]
+inherits = *QIDI PLA-CF*
+advance_pressure = 0.01
 compatible_printers_condition = printer_model=="X-MAX 3" and nozzle_diameter[0]==0.6
 
 [filament:QIDI UltraPA @X-MAX 3 0.6 nozzle]
@@ -1174,7 +1662,6 @@ compatible_printers_condition = printer_model=="X-MAX 3" and nozzle_diameter[0]=
 [filament:Generic PLA @X-MAX 3 0.6 nozzle]
 inherits = *Generic PLA*
 advance_pressure = 0.016
-slowdown_below_layer_time = 6
 compatible_printers_condition = printer_model=="X-MAX 3" and nozzle_diameter[0]==0.6
 
 [filament:Generic TPU 95A @X-MAX 3 0.6 nozzle]
@@ -1235,13 +1722,17 @@ compatible_printers_condition = printer_model=="X-MAX 3" and nozzle_diameter[0]=
 [filament:QIDI PLA Rapido @X-MAX 3 0.8 nozzle]
 inherits = *QIDI PLA Rapido*
 advance_pressure = 0.008
-slowdown_below_layer_time = 6
 compatible_printers_condition = printer_model=="X-MAX 3" and nozzle_diameter[0]==0.8
 
 [filament:QIDI PLA Rapido Matte @X-MAX 3 0.8 nozzle]
 inherits = *QIDI PLA Rapido Matte*
 advance_pressure = 0.008
-slowdown_below_layer_time = 6
+compatible_printers_condition = printer_model=="X-MAX 3" and nozzle_diameter[0]==0.8
+
+[filament:QIDI PLA-CF @X-MAX 3 0.8 nozzle]
+inherits = *QIDI PLA-CF*
+advance_pressure = 0.008
+filament_max_volumetric_speed = 18
 compatible_printers_condition = printer_model=="X-MAX 3" and nozzle_diameter[0]==0.8
 
 [filament:QIDI UltraPA @X-MAX 3 0.8 nozzle]
@@ -1263,7 +1754,6 @@ compatible_printers_condition = printer_model=="X-MAX 3" and nozzle_diameter[0]=
 [filament:Generic PLA @X-MAX 3 0.8 nozzle]
 inherits = *Generic PLA*
 advance_pressure = 0.008
-slowdown_below_layer_time = 6
 compatible_printers_condition = printer_model=="X-MAX 3" and nozzle_diameter[0]==0.8
 
 [filament:Generic TPU 95A @X-MAX 3 0.8 nozzle]
@@ -1379,6 +1869,10 @@ compatible_printers_condition = printer_model=="X-Plus 3" and nozzle_diameter[0]
 inherits = *QIDI PLA Rapido Matte*
 compatible_printers_condition = printer_model=="X-Plus 3" and nozzle_diameter[0]==0.4
 
+[filament:QIDI PLA-CF @X-Plus 3 0.4 nozzle]
+inherits = *QIDI PLA-CF*
+compatible_printers_condition = printer_model=="X-Plus 3" and nozzle_diameter[0]==0.4
+
 [filament:QIDI UltraPA @X-Plus 3 0.4 nozzle]
 inherits = *QIDI UltraPA*
 compatible_printers_condition = printer_model=="X-Plus 3" and nozzle_diameter[0]==0.4
@@ -1449,13 +1943,16 @@ compatible_printers_condition = printer_model=="X-Plus 3" and nozzle_diameter[0]
 [filament:QIDI PLA Rapido @X-Plus 3 0.6 nozzle]
 inherits = *QIDI PLA Rapido*
 advance_pressure = 0.016
-slowdown_below_layer_time = 6
 compatible_printers_condition = printer_model=="X-Plus 3" and nozzle_diameter[0]==0.6
 
 [filament:QIDI PLA Rapido Matte @X-Plus 3 0.6 nozzle]
 inherits = *QIDI PLA Rapido Matte*
 advance_pressure = 0.016
-slowdown_below_layer_time = 6
+compatible_printers_condition = printer_model=="X-Plus 3" and nozzle_diameter[0]==0.6
+
+[filament:QIDI PLA-CF @X-Plus 3 0.6 nozzle]
+inherits = *QIDI PLA-CF*
+advance_pressure = 0.01
 compatible_printers_condition = printer_model=="X-Plus 3" and nozzle_diameter[0]==0.6
 
 [filament:QIDI UltraPA @X-Plus 3 0.6 nozzle]
@@ -1477,7 +1974,6 @@ compatible_printers_condition = printer_model=="X-Plus 3" and nozzle_diameter[0]
 [filament:Generic PLA @X-Plus 3 0.6 nozzle]
 inherits = *Generic PLA*
 advance_pressure = 0.016
-slowdown_below_layer_time = 6
 compatible_printers_condition = printer_model=="X-Plus 3" and nozzle_diameter[0]==0.6
 
 [filament:Generic TPU 95A @X-Plus 3 0.6 nozzle]
@@ -1538,13 +2034,17 @@ compatible_printers_condition = printer_model=="X-Plus 3" and nozzle_diameter[0]
 [filament:QIDI PLA Rapido @X-Plus 3 0.8 nozzle]
 inherits = *QIDI PLA Rapido*
 advance_pressure = 0.008
-slowdown_below_layer_time = 6
 compatible_printers_condition = printer_model=="X-Plus 3" and nozzle_diameter[0]==0.8
 
 [filament:QIDI PLA Rapido Matte @X-Plus 3 0.8 nozzle]
 inherits = *QIDI PLA Rapido Matte*
 advance_pressure = 0.008
-slowdown_below_layer_time = 6
+compatible_printers_condition = printer_model=="X-Plus 3" and nozzle_diameter[0]==0.8
+
+[filament:QIDI PLA-CF @X-Plus 3 0.8 nozzle]
+inherits = *QIDI PLA-CF*
+advance_pressure = 0.008
+filament_max_volumetric_speed = 18
 compatible_printers_condition = printer_model=="X-Plus 3" and nozzle_diameter[0]==0.8
 
 [filament:QIDI UltraPA @X-Plus 3 0.8 nozzle]
@@ -1566,7 +2066,6 @@ compatible_printers_condition = printer_model=="X-Plus 3" and nozzle_diameter[0]
 [filament:Generic PLA @X-Plus 3 0.8 nozzle]
 inherits = *Generic PLA*
 advance_pressure = 0.008
-slowdown_below_layer_time = 6
 compatible_printers_condition = printer_model=="X-Plus 3" and nozzle_diameter[0]==0.8
 
 [filament:Generic TPU 95A @X-Plus 3 0.8 nozzle]
@@ -1682,13 +2181,15 @@ compatible_printers_condition = printer_model=="X-smart 3" and nozzle_diameter[0
 [filament:QIDI PLA Rapido @X-smart 3 0.4 nozzle]
 inherits = *QIDI PLA Rapido*
 filament_max_volumetric_speed = 19
-slowdown_below_layer_time = 8
 compatible_printers_condition = printer_model=="X-smart 3" and nozzle_diameter[0]==0.4
 
 [filament:QIDI PLA Rapido Matte @X-smart 3 0.4 nozzle]
 inherits = *QIDI PLA Rapido Matte*
 filament_max_volumetric_speed = 20
-slowdown_below_layer_time = 8
+compatible_printers_condition = printer_model=="X-smart 3" and nozzle_diameter[0]==0.4
+
+[filament:QIDI PLA-CF @X-smart 3 0.4 nozzle]
+inherits = *QIDI PLA-CF*
 compatible_printers_condition = printer_model=="X-smart 3" and nozzle_diameter[0]==0.4
 
 [filament:QIDI UltraPA @X-smart 3 0.4 nozzle]
@@ -1710,7 +2211,6 @@ compatible_printers_condition = printer_model=="X-smart 3" and nozzle_diameter[0
 
 [filament:Generic PLA @X-smart 3 0.4 nozzle]
 inherits = *Generic PLA*
-slowdown_below_layer_time = 8
 compatible_printers_condition = printer_model=="X-smart 3" and nozzle_diameter[0]==0.4
 
 [filament:Generic TPU 95A @X-smart 3 0.4 nozzle]
@@ -1766,13 +2266,16 @@ compatible_printers_condition = printer_model=="X-smart 3" and nozzle_diameter[0
 [filament:QIDI PLA Rapido @X-smart 3 0.6 nozzle]
 inherits = *QIDI PLA Rapido*
 advance_pressure = 0.016
-slowdown_below_layer_time = 6
 compatible_printers_condition = printer_model=="X-smart 3" and nozzle_diameter[0]==0.6
 
 [filament:QIDI PLA Rapido Matte @X-smart 3 0.6 nozzle]
 inherits = *QIDI PLA Rapido Matte*
 advance_pressure = 0.016
-slowdown_below_layer_time = 6
+compatible_printers_condition = printer_model=="X-smart 3" and nozzle_diameter[0]==0.6
+
+[filament:QIDI PLA-CF @X-smart 3 0.6 nozzle]
+inherits = *QIDI PLA-CF*
+advance_pressure = 0.01
 compatible_printers_condition = printer_model=="X-smart 3" and nozzle_diameter[0]==0.6
 
 [filament:QIDI UltraPA @X-smart 3 0.6 nozzle]
@@ -1793,7 +2296,6 @@ compatible_printers_condition = printer_model=="X-smart 3" and nozzle_diameter[0
 [filament:Generic PLA @X-smart 3 0.6 nozzle]
 inherits = *Generic PLA*
 advance_pressure = 0.016
-slowdown_below_layer_time = 6
 compatible_printers_condition = printer_model=="X-smart 3" and nozzle_diameter[0]==0.6
 
 [filament:Generic TPU 95A @X-smart 3 0.6 nozzle]
@@ -1855,13 +2357,17 @@ compatible_printers_condition = printer_model=="X-smart 3" and nozzle_diameter[0
 [filament:QIDI PLA Rapido @X-smart 3 0.8 nozzle]
 inherits = *QIDI PLA Rapido*
 advance_pressure = 0.008
-slowdown_below_layer_time = 6
 compatible_printers_condition = printer_model=="X-smart 3" and nozzle_diameter[0]==0.8
 
 [filament:QIDI PLA Rapido Matte @X-smart 3 0.8 nozzle]
 inherits = *QIDI PLA Rapido Matte*
 advance_pressure = 0.008
-slowdown_below_layer_time = 6
+compatible_printers_condition = printer_model=="X-smart 3" and nozzle_diameter[0]==0.8
+
+[filament:QIDI PLA-CF @X-smart 3 0.8 nozzle]
+inherits = *QIDI PLA-CF*
+advance_pressure = 0.008
+filament_max_volumetric_speed = 18
 compatible_printers_condition = printer_model=="X-smart 3" and nozzle_diameter[0]==0.8
 
 [filament:QIDI UltraPA @X-smart 3 0.8 nozzle]
@@ -1882,7 +2388,6 @@ compatible_printers_condition = printer_model=="X-smart 3" and nozzle_diameter[0
 [filament:Generic PLA @X-smart 3 0.8 nozzle]
 inherits = *Generic PLA*
 advance_pressure = 0.008
-slowdown_below_layer_time = 6
 compatible_printers_condition = printer_model=="X-smart 3" and nozzle_diameter[0]==0.8
 
 [filament:Generic TPU 95A @X-smart 3 0.8 nozzle]
@@ -1896,8 +2401,7 @@ autoemit_temperature_commands = 1
 auxiliary_fan = 0
 bed_custom_model = 
 bed_custom_texture = 
-bed_exclude_area_0 = 
+bed_exclude_area = 0x0
-bed_exclude_area_1 = 
 bed_shape = 0x0,325x0,325x325,0x325
 before_layer_gcode = 
 between_objects_gcode = 
@@ -1973,7 +2477,7 @@ thumbnails_format = PNG
 travel_lift_before_obstacle = 0
 travel_max_lift = 0.4
 travel_ramping_lift = 1
-travel_slope = 1
+travel_slope = 3
 toolchange_gcode = 
 use_firmware_retraction = 0
 use_relative_e_distances = 1
@@ -1983,6 +2487,58 @@ wipe = 1
 wipe_distance = 2
 z_offset = 0
 
+# Q1 Pro preset
+[printer:*Q1 Pro*]
+inherits = *common*
+printer_model = Q1 Pro
+autoemit_temperature_commands = 0
+auxiliary_fan = 1
+bed_exclude_area = 0x0,0x0,25x240,25x245,115x245,115x240,25x240,0x0,0x0,208x240,208x245,245x245,245x240,208x240,0x0
+bed_shape = 0x0,245x0,245x245,0x245
+chamber_temperature = 1
+layer_gcode = G92 E0\n;LOG_Z
+max_print_height = 245
+retract_lift_below = 244
+start_gcode = PRINT_START BED=[first_layer_bed_temperature] HOTEND=[first_layer_temperature] CHAMBER=[volume_temperature]\nM83\nG4 P3000\nG0 X{max((min(print_bed_max[0], first_layer_print_min[0] + 80) - 85),0)} Y{max((min(print_bed_max[1], first_layer_print_min[1] + 80) - 85),0)} Z5 F6000\nG0 Z[first_layer_height] F600\nG1 E3 F1800\nG1 X{(min(print_bed_max[0], first_layer_print_min[0] + 80))} E{85 * 0.5 * first_layer_height * nozzle_diameter[0]} F3000\nG1 Y{max((min(print_bed_max[1], first_layer_print_min[1] + 80) - 85),0) + 2} E{2 * 0.5 * first_layer_height * nozzle_diameter[0]} F3000\nG1 X{max((min(print_bed_max[0], first_layer_print_min[0] + 80) - 85),0)} E{85 * 0.5 * first_layer_height * nozzle_diameter[0]} F3000\nG1 Y{max((min(print_bed_max[1], first_layer_print_min[1] + 80) - 85),0) + 85} E{83 * 0.5 * first_layer_height * nozzle_diameter[0]} F3000\nG1 X{max((min(print_bed_max[0], first_layer_print_min[0] + 80) - 85),0) + 2} E{2 * 0.5 * first_layer_height * nozzle_diameter[0]} F3000\nG1 Y{max((min(print_bed_max[1], first_layer_print_min[1] + 80) - 85),0) + 3} E{82 * 0.5 * first_layer_height * nozzle_diameter[0]} F3000\nG1 X{max((min(print_bed_max[0], first_layer_print_min[0] + 80) - 85),0) + 3} Z0\nG1 X{max((min(print_bed_max[0], first_layer_print_min[0] + 80) - 85),0) + 6}\nG1 Z1 F600\n
+thumbnails = 160x160/PNG, 112x112/PNG
+
+[printer:Q1 Pro 0.2 nozzle]
+inherits = *Q1 Pro*
+default_filament_profile = Generic PLA @Q1 Pro 0.2 nozzle
+default_print_profile = 0.12mm Fine @Q1 Pro 0.2 nozzle
+max_layer_height = 0.14
+min_layer_height = 0.04
+nozzle_diameter = 0.2
+printer_variant = 0.2
+retract_length = 0.4
+
+[printer:Q1 Pro 0.4 nozzle]
+inherits = *Q1 Pro*
+default_filament_profile = Generic PLA @Q1 Pro 0.4 nozzle
+default_print_profile = 0.20mm Fine @Q1 Pro 0.4 nozzle
+retract_length = 0.8
+
+[printer:Q1 Pro 0.6 nozzle]
+inherits = *Q1 Pro*
+default_filament_profile = Generic PLA @Q1 Pro 0.6 nozzle
+default_print_profile = 0.30mm Fine @Q1 Pro 0.6 nozzle
+max_layer_height = 0.42
+min_layer_height = 0.12
+nozzle_diameter = 0.6
+printer_variant = 0.6
+retract_before_travel = 3
+retract_length = 1.4
+
+[printer:Q1 Pro 0.8 nozzle]
+inherits = *Q1 Pro*
+default_filament_profile = Generic PLA @Q1 Pro 0.8 nozzle
+default_print_profile = 0.40mm Fine @Q1 Pro 0.8 nozzle
+max_layer_height = 0.56
+min_layer_height = 0.16
+nozzle_diameter = 0.8
+printer_variant = 0.8
+retract_length = 3
+
 # X-MAX 3 preset
 [printer:*X-MAX 3*]
 inherits = *common*

resources/profiles/QIDITechnology/Q1 Pro.svg

@@ -0,0 +1,60 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Generator: Adobe Illustrator 25.0.0, SVG Export Plug-In . SVG Version: 6.00 Build 0)  -->
+<svg version="1.1" id="图层_1" xmlns="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3.org/1999/xlink" x="0px" y="0px"
+	 width="694.5px" height="694.5px" viewBox="0 0 694.5 694.5" enable-background="new 0 0 694.5 694.5" xml:space="preserve">
+<rect fill="#FFFFFF" width="1.4" height="694.5"/>
+<rect x="693.1" y="15.7" fill="#FFFFFF" width="1.4" height="678.8"/>
+<rect x="0" y="693.1" fill="#FFFFFF" width="694.5" height="1.4"/>
+<rect x="559.1" fill="#FFFFFF" width="1.4" height="694.5"/>
+<rect x="417.4" fill="#FFFFFF" width="1.4" height="694.5"/>
+<rect x="275.7" y="15.7" fill="#FFFFFF" width="1.4" height="678.8"/>
+<rect x="133.9" y="14.2" fill="#FFFFFF" width="1.4" height="680.3"/>
+<rect x="21.1" y="0" fill="#FFFFFF" width="0.4" height="694.5"/>
+<rect x="49.4" y="0" fill="#FFFFFF" width="0.4" height="694.5"/>
+<rect x="77.8" y="14.2" fill="#FFFFFF" width="0.4" height="680.3"/>
+<rect x="106.1" y="14.2" fill="#FFFFFF" width="0.4" height="680.3"/>
+<rect x="162.8" y="15.7" fill="#FFFFFF" width="0.4" height="678.8"/>
+<rect x="191.1" y="15.7" fill="#FFFFFF" width="0.4" height="678.8"/>
+<rect x="219.5" y="15.7" fill="#FFFFFF" width="0.4" height="678.8"/>
+<rect x="247.8" y="15.7" fill="#FFFFFF" width="0.4" height="678.8"/>
+<rect x="304.5" y="15.7" fill="#FFFFFF" width="0.4" height="678.8"/>
+<rect x="332.9" y="0" fill="#FFFFFF" width="0.4" height="694.5"/>
+<rect x="361.2" y="0" fill="#FFFFFF" width="0.4" height="694.5"/>
+<rect x="389.6" y="0" fill="#FFFFFF" width="0.4" height="694.5"/>
+<rect x="446.3" y="0" fill="#FFFFFF" width="0.4" height="694.5"/>
+<rect x="474.6" y="0" fill="#FFFFFF" width="0.4" height="694.5"/>
+<rect x="502.9" y="0" fill="#FFFFFF" width="0.4" height="694.5"/>
+<rect x="531.3" y="0" fill="#FFFFFF" width="0.4" height="694.5"/>
+<rect x="588" y="0" fill="#FFFFFF" width="0.4" height="694.5"/>
+<rect x="616.3" y="15.7" fill="#FFFFFF" width="0.4" height="678.8"/>
+<rect x="644.7" y="15.7" fill="#FFFFFF" width="0.4" height="678.8"/>
+<rect x="673" y="15.7" fill="#FFFFFF" width="0.4" height="678.8"/>
+<rect x="0" y="559.1" fill="#FFFFFF" width="694.5" height="1.4"/>
+<rect x="0" y="417.4" fill="#FFFFFF" width="694.5" height="1.4"/>
+<rect x="0" y="275.7" fill="#FFFFFF" width="694.5" height="1.4"/>
+<rect x="0" y="133.9" fill="#FFFFFF" width="694.5" height="1.4"/>
+<rect x="0" y="21.1" fill="#FFFFFF" width="694.5" height="0.4"/>
+<rect x="0" y="49.4" fill="#FFFFFF" width="694.5" height="0.4"/>
+<rect x="0" y="77.8" fill="#FFFFFF" width="694.5" height="0.4"/>
+<rect x="0" y="106.1" fill="#FFFFFF" width="694.5" height="0.4"/>
+<rect x="0" y="162.8" fill="#FFFFFF" width="694.5" height="0.4"/>
+<rect x="0" y="191.1" fill="#FFFFFF" width="694.5" height="0.4"/>
+<rect x="0" y="219.5" fill="#FFFFFF" width="694.5" height="0.4"/>
+<rect x="0" y="247.8" fill="#FFFFFF" width="694.5" height="0.4"/>
+<rect x="0" y="304.5" fill="#FFFFFF" width="694.5" height="0.4"/>
+<rect x="0" y="332.9" fill="#FFFFFF" width="694.5" height="0.4"/>
+<rect x="0" y="361.2" fill="#FFFFFF" width="694.5" height="0.4"/>
+<rect x="0" y="389.6" fill="#FFFFFF" width="694.5" height="0.4"/>
+<rect x="0" y="446.3" fill="#FFFFFF" width="694.5" height="0.4"/>
+<rect x="0" y="474.6" fill="#FFFFFF" width="694.5" height="0.4"/>
+<rect x="0" y="502.9" fill="#FFFFFF" width="694.5" height="0.4"/>
+<rect x="0" y="531.3" fill="#FFFFFF" width="694.5" height="0.4"/>
+<rect x="0" y="588" fill="#FFFFFF" width="694.5" height="0.4"/>
+<rect x="0" y="616.3" fill="#FFFFFF" width="694.5" height="0.4"/>
+<rect x="0" y="644.7" fill="#FFFFFF" width="694.5" height="0.4"/>
+<rect x="0" y="673" fill="#FFFFFF" width="694.5" height="0.4"/>
+<polygon fill="#FFFFFF" points="694.5,15.7 588.1,15.7 588.1,0 589.6,0 589.6,14 694.5,14 "/>
+<polygon fill="#FFFFFF" points="327.5,15.7 69.4,15.7 69.4,0 70.9,0 70.9,14 326,14 326,0 327.5,0 "/>
+<rect x="327.5" y="0" fill="#FFFFFF" width="260.9" height="1.4"/>
+<rect x="0" y="0" fill="#FFFFFF" width="69.4" height="1.4"/>
+</svg>

resources/web/guide/index.html

@@ -83,6 +83,10 @@
 						<div class="MenuBtnIcon"><img src="img/MenuBtnIcon.svg"/></div>
 						<div class="trans" tid="t17"></div>
 					</li>
+					<li menu="MaxVolumetricSpeed" class="MenuBtn" onClick="GotoMenu('MaxVolumetricSpeed')">
+						<div class="MenuBtnIcon"><img src="img/MenuBtnIcon.svg"/></div>
+						<div class="trans" tid="t19"></div>
+					</li>
 				</ol>
 			</li>
 
@@ -93,6 +97,10 @@
 					<i class="fa fa-caret-right"></i>
 				</label>
 				<ol>
+					<li menu="Q1 Pro" class="MenuBtn" onClick="GotoMenu('Q1 Pro')">
+						<div class="MenuBtnIcon"><img src="img/MenuBtnIcon.svg"/></div>
+						<div>Q1 Pro</div>
+					</li>
 					<li menu="X-MAX 3" class="MenuBtn" onClick="GotoMenu('X-MAX 3')">
 						<div class="MenuBtnIcon"><img src="img/MenuBtnIcon.svg"/></div>
 						<div>X-MAX 3</div>
@@ -174,6 +182,10 @@
 				<div class="AutozoomImage"><img src="img/PressureAdvance.gif"/></div>
 				<div class="ThumbnailTitle trans" tid="t17"></div>
 			</div>
+			<div class="Thumbnail" onClick="GotoMenu('MaxVolumetricSpeed')">
+				<div class="AutozoomImage"><img src="img/MaxVolumetricSpeed.gif"/></div>
+				<div class="ThumbnailTitle trans" tid="t19"></div>
+			</div>
 			<div class="Thumbnail" onClick="GotoMenu('IssueReport')">
 				<div class="AutozoomImage"><img src="img/IssueReport.png"/></div>
 				<div class="ThumbnailTitle trans" tid="t6"></div>
@@ -294,6 +306,20 @@
 			<div class="CenterImage"><img src="img/PressureAdvanceTower.png"/></div>
 		</div>
 
+		<div class="IntroduceBoard" board="MaxVolumetricSpeed">
+			<div class="IntroduceTitle trans" tid="t19"></div>
+			<div class="IntroduceText trans" tid="l44"></div>
+			<div class="IntroduceText trans" tid="l45"></div>
+			<div class="AutozoomImage"><img src="img/MaxVolumetricSpeed.gif"/></div>
+			<div class="IntroduceText trans" tid="l46"></div>
+		</div>
+
+		<div class="IntroduceBoard" board="Q1 Pro">
+			<div class="AutozoomImage"><img src="img/Q1 ProPoster.png"/></div>
+			<div class="IntroduceTextBold trans" tid="l0"></div>
+			<div class="IntroduceText">https://qidi3d.com</div>
+		</div>
+
 		<div class="IntroduceBoard" board="X-MAX 3">
 			<div class="AutozoomImage"><img src="img/X-MAX3Poster.png"/></div>
 			<div class="IntroduceTextBold trans" tid="l0"></div>
@@ -526,6 +552,22 @@
 							<td>2200 ± 200</td>
 							<td>7.5 ± 1.5</td>
 						</tr>
+						<tr v-for="(item, index) in 1" :key="index">
+							<td>PLA-CF</td>
+							<td>≤30％</td>
+							<td>/</td>
+							<td>+</td>
+							<td>+</td>
+							<td>++</td>
+							<td>55.2℃</td>
+							<td>52.6℃</td>
+							<td>54.92 ± 0.22</td>
+							<td>4020.55 ± 99.11</td>
+							<td>4.90 ± 0.97</td>
+							<td>91.57 ± 0.31</td>
+							<td>4197.66 ± 279.96</td>
+							<td>6.65 ± 0.38</td>
+						</tr>
 						<tr v-for="(item, index) in 1" :key="index">
 							<td>UltraPA</td>
 							<td>≤15％</td>
@@ -554,6 +596,14 @@
 			<div class="IntroduceText trans" tid="l2"></div>
 			<div class="IntroduceText trans" tid="l3"></div>
 			<div class="EmailBlock">
+				<div class="PrinterBlock">
+					<div class="CenterImage"><img src="img/Q1 Pro.png"/></div>
+					<div class="ThumbnailTitle">Q1 Pro</div>
+					<div class="IntroduceText">
+						<b>E-mail:</b><br/>Q1support@qidi3d.com<br>Q1AMS@qidi3d.com<br/><br>
+						<b>Skype:</b><br/>Q1support@qidi3d.com
+					</div>
+				</div>
 				<div class="PrinterBlock">
 					<div class="CenterImage"><img src="img/X-MAX 3.png"/></div>
 					<div class="ThumbnailTitle">X-MAX 3</div>