From e505af5cc7da0870d73f52b2c8d90eab0d9cf13e Mon Sep 17 00:00:00 2001
From: QIDI TECH <893239786@qq.com>
Date: Mon, 1 Jul 2024 20:25:31 +0800
Subject: [PATCH] Update QIDITechnology.ini

---
 resources/profiles/QIDITechnology.ini | 12 ++++++------
 src/libslic3r/PrintConfig.cpp         |  2 +-
 2 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/resources/profiles/QIDITechnology.ini b/resources/profiles/QIDITechnology.ini
index 9e1f34b..3e46718 100644
--- a/resources/profiles/QIDITechnology.ini
+++ b/resources/profiles/QIDITechnology.ini
@@ -651,7 +651,7 @@ compatible_prints_condition =
 cooling = 1
 disable_fan_first_layers = 1
 disable_rapid_cooling_fan_first_layers = 3
-dont_slow_down_outer_wall = 0
+dont_slow_down_outer_wall = 1
 enable_advance_pressure = 1
 enable_auxiliary_fan = 100
 enable_auxiliary_fan_unseal = 0
@@ -719,7 +719,7 @@ overhang_fan_speed_1 = 0
 overhang_fan_speed_2 = 0
 overhang_fan_speed_3 = 0
 seal_print = 1
-slowdown_below_layer_time = 5
+slowdown_below_layer_time = 8
 smooth_time = 0.03
 start_filament_gcode = "; Filament gcode\n{if (enable_advance_pressure[0] == true)}M900 K[advance_pressure]{else}M900 K0{endif} T[smooth_time]\n"
 temperature = 220
@@ -791,6 +791,7 @@ max_fan_speed = 20
 min_fan_speed = 20
 overhang_fan_speed_0 = 100
 overhang_fan_speed_1 = 100
+slowdown_below_layer_time = 5
 temperature = 270
 volume_temperature = 55
 
@@ -872,6 +873,7 @@ overhang_fan_speed_0 = 100
 overhang_fan_speed_1 = 100
 overhang_fan_speed_2 = 100
 overhang_fan_speed_3 = 100
+slowdown_below_layer_time = 5
 temperature = 290
 
 [filament:*QIDI PAHT-CF*]
@@ -891,6 +893,7 @@ first_layer_bed_temperature = 80
 first_layer_temperature = 310
 max_fan_speed = 40
 min_fan_speed = 20
+slowdown_below_layer_time = 5
 temperature = 310
 
 # QIDI filament preset
@@ -941,6 +944,7 @@ overhang_fan_speed_0 = 100
 overhang_fan_speed_1 = 100
 overhang_fan_speed_2 = 100
 overhang_fan_speed_3 = 100
+slowdown_below_layer_time = 5
 temperature = 320
 
 [filament:*QIDI PETG-Tough*]
@@ -962,7 +966,6 @@ max_fan_speed = 40
 min_fan_speed = 10
 overhang_fan_speed_0 = 100
 overhang_fan_speed_1 = 100
-slowdown_below_layer_time = 8
 temperature = 250
 
 [filament:*QIDI PLA Rapido*]
@@ -1057,7 +1060,6 @@ filament_colour = #0000FF
 filament_density = 1.20
 filament_max_volumetric_speed = 14
 filament_vendor = Generic
-slowdown_below_layer_time = 8
 
 [filament:*Generic PLA Silk*]
 inherits = *common*
@@ -1070,7 +1072,6 @@ filament_retract_length = 0.5
 filament_vendor = Generic
 first_layer_bed_temperature = 55
 first_layer_temperature = 220
-slowdown_below_layer_time = 8
 
 [filament:*Generic TPU 95A*]
 inherits = *common*
@@ -1083,7 +1084,6 @@ filament_max_volumetric_speed = 4
 filament_type = TPU
 filament_vendor = Generic
 first_layer_temperature = 230
-slowdown_below_layer_time = 8
 temperature = 230
 
 # Q1 Pro 0.2 nozzle QIDI filament preset
diff --git a/src/libslic3r/PrintConfig.cpp b/src/libslic3r/PrintConfig.cpp
index 26d3366..d9ae368 100644
--- a/src/libslic3r/PrintConfig.cpp
+++ b/src/libslic3r/PrintConfig.cpp
@@ -2277,7 +2277,7 @@ void PrintConfigDef::init_fff_params()
                      "2. To avoid changes in external wall speed which may create slight wall artefacts that appear like z banding \n"
                      "3. To avoid printing at speeds which cause VFAs (fine artefacts) on the external walls\n\n");
     def->mode = comExpert;
-    def->set_default_value(new ConfigOptionBools { false });
+    def->set_default_value(new ConfigOptionBools { true });
 
     def = this->add("min_print_speed", coFloats);
     def->label = L("Min print speed");