Add filament shrink

resources/profiles/QIDITechnology.ini

@@ -64,6 +64,7 @@ compatible_printers =
 compatible_printers_condition = 
 complete_objects = 0
 default_acceleration = 10000
+detect_narrow_internal_solid_infill = 1
 dont_support_bridges = 0
 draft_shield = disabled
 elefant_foot_compensation = 0
@@ -121,6 +122,7 @@ max_volumetric_speed = 0
 min_bead_width = 85%
 min_feature_size = 25%
 min_skirt_length = 5
+mmu_segmented_region_interlocking_depth = 0
 mmu_segmented_region_max_width = 0
 notes = 
 only_retract_when_crossing_perimeters = 0
@@ -145,7 +147,7 @@ raft_first_layer_density = 90%
 raft_first_layer_expansion = 3
 raft_layers = 0
 resolution = 0
-seam_gap = 15
+seam_gap = 15%
 seam_position = aligned
 single_extruder_multi_material_priming = 1
 skirt_distance = 6
@@ -198,7 +200,7 @@ support_tree_tip_diameter = 0.8
 support_tree_top_rate = 15%
 thick_bridges = 0
 thin_walls = 0
-top_area_threshold = 100
+top_area_threshold = 100%
 top_fill_pattern = monotoniclines
 top_infill_extrusion_width = 0.42
 top_one_wall_type = all_top
@@ -224,8 +226,10 @@ wipe_tower_rotation_angle = 0
 wipe_tower_width = 40
 wipe_tower_x = 180
 wipe_tower_y = 140
-xy_size_compensation = 0
+xy_contour_compensation = 0
+xy_hole_compensation = 0
 
+# Machine Print preset
 [print:*X-MAX 3*]
 inherits = *common*
 
@@ -589,6 +593,9 @@ filament_loading_speed = 28
 filament_loading_speed_start = 3
 filament_max_volumetric_speed = 20
 filament_minimal_purge_on_wipe_tower = 15
+filament_multitool_ramming = 0
+filament_multitool_ramming_flow = 10
+filament_multitool_ramming_volume = 10
 filament_notes = ""
 filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
 filament_retract_before_travel = nil
@@ -601,15 +608,20 @@ filament_retract_lift_below = nil
 filament_retract_restart_extra = nil
 filament_retract_speed = nil
 filament_settings_id = 
+filament_shrink = 100
 filament_soluble = 0
 filament_spool_weight = 0
 filament_toolchange_delay = 0
+filament_travel_max_lift = nil
+filament_travel_ramping_lift = nil
+filament_travel_slope = nil
 filament_type = PLA
 filament_unload_time = 0
 filament_unloading_speed = 90
 filament_unloading_speed_start = 100
 filament_vendor = QIDI
 filament_wipe = nil
+filament_wipe_distance = nil
 first_layer_bed_temperature = 60
 first_layer_temperature = 210
 full_fan_speed_layer = 0
@@ -760,6 +772,7 @@ fan_below_layer_time = 10
 filament_colour = #696969
 filament_density = 1.09
 filament_max_volumetric_speed = 10
+filament_travel_ramping_lift = 0
 filament_type = PA12-CF
 first_layer_bed_temperature = 80
 first_layer_temperature = 290
@@ -783,6 +796,7 @@ fan_below_layer_time = 10
 filament_colour = #4F4F4F
 filament_density = 1.20
 filament_max_volumetric_speed = 14
+filament_travel_ramping_lift = 0
 filament_type = PAHT-CF
 first_layer_bed_temperature = 80
 first_layer_temperature = 310
@@ -828,6 +842,7 @@ fan_below_layer_time = 10
 filament_colour = #323232
 filament_density = 1.30
 filament_max_volumetric_speed = 12
+filament_travel_ramping_lift = 0
 filament_type = PET-CF
 first_layer_bed_temperature = 80
 first_layer_temperature = 320
@@ -1884,7 +1899,7 @@ bed_custom_texture =
 bed_exclude_area_0 = 
 bed_exclude_area_1 = 
 bed_shape = 0x0,325x0,325x325,0x325
-before_layer_gcode = G92 E0
+before_layer_gcode = 
 between_objects_gcode = 
 binary_gcode = 0
 chamber_fan = 1
@@ -1903,7 +1918,7 @@ gcode_flavor = klipper
 high_current_on_filament_swap = 0
 host_type = moonraker
 inherits = 
-layer_gcode = 
+layer_gcode = G92 E0
 machine_limits_usage = time_estimate_only
 machine_max_acceleration_e = 5000
 machine_max_acceleration_extruding = 20000
@@ -1951,7 +1966,7 @@ retract_restart_extra_toolchange = 0
 retract_speed = 30
 silent_mode = 0
 single_extruder_multi_material = 0
-start_gcode = PRINT_START\nG28\nM141 S0\nG0 Z50 F600\nM190 S[first_layer_bed_temperature]\nG28 Z\nG29; mesh bed leveling ,comment this code to close it\nG0 X0 Y0 Z50 F6000\nM109 S[first_layer_temperature]\nM106 P3 S255\nM83\nG4 P3000\nG0 X{max((min(print_bed_max[0], first_layer_print_min[0] + 80) - 85),0)} Y{max((min(print_bed_max[1], first_layer_print_min[1] + 80) - 85),0)} Z5 F6000\nG0 Z[first_layer_height] F600\nG1 E3 F1800\nG1 X{(min(print_bed_max[0], first_layer_print_min[0] + 80))} E{85 * 0.5 * first_layer_height * nozzle_diameter[0]} F3000\nG1 Y{max((min(print_bed_max[1], first_layer_print_min[1] + 80) - 85),0) + 2} E{2 * 0.5 * first_layer_height * nozzle_diameter[0]} F3000\nG1 X{max((min(print_bed_max[0], first_layer_print_min[0] + 80) - 85),0)} E{85 * 0.5 * first_layer_height * nozzle_diameter[0]} F3000\nG1 Y{max((min(print_bed_max[1], first_layer_print_min[1] + 80) - 85),0) + 85} E{83 * 0.5 * first_layer_height * nozzle_diameter[0]} F3000\nG1 X{max((min(print_bed_max[0], first_layer_print_min[0] + 80) - 85),0) + 2} E{2 * 0.5 * first_layer_height * nozzle_diameter[0]} F3000\nG1 Y{max((min(print_bed_max[1], first_layer_print_min[1] + 80) - 85),0) + 3} E{82 * 0.5 * first_layer_height * nozzle_diameter[0]} F3000\nG1 X{max((min(print_bed_max[0], first_layer_print_min[0] + 80) - 85),0) + 12} E{-10 * 0.5 * first_layer_height * nozzle_diameter[0]} F3000\nG1 E{10 * 0.5 * first_layer_height * nozzle_diameter[0]} F3000
+start_gcode = PRINT_START\nG28\nM141 S0\nG0 Z50 F600\nM190 S[first_layer_bed_temperature]\nG28 Z\nG29; mesh bed leveling ,comment this code to close it\nG0 X0 Y0 Z50 F6000\nM109 S[first_layer_temperature]\nM106 P3 S255\nM83\nG4 P3000\nG0 X{max((min(print_bed_max[0], first_layer_print_min[0] + 80) - 85),0)} Y{max((min(print_bed_max[1], first_layer_print_min[1] + 80) - 85),0)} Z5 F6000\nG0 Z[first_layer_height] F600\nG1 E3 F1800\nG1 X{(min(print_bed_max[0], first_layer_print_min[0] + 80))} E{85 * 0.5 * first_layer_height * nozzle_diameter[0]} F3000\nG1 Y{max((min(print_bed_max[1], first_layer_print_min[1] + 80) - 85),0) + 2} E{2 * 0.5 * first_layer_height * nozzle_diameter[0]} F3000\nG1 X{max((min(print_bed_max[0], first_layer_print_min[0] + 80) - 85),0)} E{85 * 0.5 * first_layer_height * nozzle_diameter[0]} F3000\nG1 Y{max((min(print_bed_max[1], first_layer_print_min[1] + 80) - 85),0) + 85} E{83 * 0.5 * first_layer_height * nozzle_diameter[0]} F3000\nG1 X{max((min(print_bed_max[0], first_layer_print_min[0] + 80) - 85),0) + 2} E{2 * 0.5 * first_layer_height * nozzle_diameter[0]} F3000\nG1 Y{max((min(print_bed_max[1], first_layer_print_min[1] + 80) - 85),0) + 3} E{82 * 0.5 * first_layer_height * nozzle_diameter[0]} F3000\nG1 X{max((min(print_bed_max[0], first_layer_print_min[0] + 80) - 85),0) + 12} E{-10 * 0.5 * first_layer_height * nozzle_diameter[0]} F3000\nG1 E{10 * 0.5 * first_layer_height * nozzle_diameter[0]} F3000\n
 template_custom_gcode = 
 thumbnails = 
 thumbnails_format = PNG
@@ -1976,6 +1991,7 @@ auxiliary_fan = 1
 bed_shape = 0x0,325x0,325x325,0x325
 chamber_temperature = 1
 max_print_height = 315
+retract_lift_below = 314
 thumbnails = 380x380/QIDI, 210x210/QIDI, 110x110/PNG
 
 [printer:X-MAX 3 0.2 nozzle]
@@ -2022,6 +2038,7 @@ auxiliary_fan = 1
 bed_shape = 0x0,280x0,280x280,0x280
 chamber_temperature = 1
 max_print_height = 270
+retract_lift_below = 269
 thumbnails = 380x380/QIDI, 210x210/QIDI, 110x110/PNG
 
 [printer:X-Plus 3 0.2 nozzle]
@@ -2066,6 +2083,7 @@ inherits = *common*
 printer_model = X-smart 3
 bed_shape = 0x0,175x0,175x180,0x180
 max_print_height = 170
+retract_lift_below = 169
 thumbnails = 205x205/QIDI, 140x140/QIDI, 110x110/PNG
 
 [printer:X-smart 3 0.2 nozzle]