diff --git a/resources/profiles/QIDITechnology.ini b/resources/profiles/QIDITechnology.ini
index 8483ceb..67f9cb0 100644
--- a/resources/profiles/QIDITechnology.ini
+++ b/resources/profiles/QIDITechnology.ini
@@ -16,7 +16,7 @@ changelog_url = https://qidi3d.com/pages/software-firmware
 
 [printer_model:X-MAX 3]
 name = X-MAX 3
-variants = 0.4; 0.2
+variants = 0.4; 0.2; 0.6; 0.8
 technology = FFF
 family = X
 bed_model = X-MAX 3_bed.stl
@@ -25,7 +25,7 @@ default_materials = QIDI ABS Odorless @X-MAX 3 0.4 nozzle; QIDI ABS Rapido @X-MA
 
 [printer_model:X-Plus 3]
 name = X-Plus 3
-variants = 0.4; 0.2
+variants = 0.4; 0.2; 0.6; 0.8
 technology = FFF
 family = X
 bed_model = X-Plus 3_bed.stl
@@ -34,7 +34,7 @@ default_materials = QIDI ABS Odorless @X-Plus 3 0.4 nozzle; QIDI ABS Rapido @X-P
 
 [printer_model:X-smart 3]
 name = X-smart 3
-variants = 0.4; 0.2
+variants = 0.4; 0.2; 0.6; 0.8
 technology = FFF
 family = X
 bed_model = X-smart 3_bed.stl
@@ -65,7 +65,7 @@ complete_objects = 0
 default_acceleration = 10000
 dont_support_bridges = 0
 draft_shield = disabled
-elefant_foot_compensation = 0.15
+elefant_foot_compensation = 0
 enable_dynamic_overhang_speeds = 1
 external_perimeter_acceleration = 3000
 external_perimeter_extrusion_width = 0.42
@@ -122,7 +122,7 @@ min_feature_size = 25%
 min_skirt_length = 5
 mmu_segmented_region_max_width = 0
 notes = 
-only_retract_when_crossing_perimeters = 1
+only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
 output_filename_format = [input_filename_base].gcode
 overhang_speed_0 = 10
@@ -202,7 +202,7 @@ top_infill_extrusion_width = 0.42
 top_solid_infill_acceleration = 2000
 top_solid_infill_speed = 200
 top_solid_layers = 4
-top_solid_min_thickness = 0.6
+top_solid_min_thickness = 0.8
 travel_acceleration = 10000
 travel_speed = 500
 travel_speed_z = 10
@@ -236,7 +236,6 @@ inherits = *common*
 # Nozzle Print preset
 [print:*0.2 nozzle*]
 bottom_solid_layers = 5
-elefant_foot_compensation = 0
 external_perimeter_extrusion_width = 0.22
 external_perimeter_speed = 120
 extrusion_width = 0.22
@@ -255,9 +254,54 @@ solid_infill_speed = 150
 support_material_extrusion_width = 0.22
 top_infill_extrusion_width = 0.22
 top_solid_infill_speed = 150
-top_solid_min_thickness = 0.8
 
 [print:*0.4 nozzle*]
+elefant_foot_compensation = 0.15
+
+[print:*0.6 nozzle*]
+bridge_speed = 30
+external_perimeter_extrusion_width = 0.62
+external_perimeter_speed = 120
+extrusion_width = 0.62
+first_layer_extrusion_width = 0.62
+first_layer_height = 0.3
+first_layer_infill_speed = 55
+first_layer_speed = 35
+gap_fill_speed = 50
+infill_extrusion_width = 0.62
+infill_speed = 100
+overhang_speed_1 = 15
+perimeter_extrusion_width = 0.62
+perimeter_speed = 150
+solid_infill_extrusion_width = 0.62
+solid_infill_speed = 150
+support_material_extrusion_width = 0.62
+top_infill_extrusion_width = 0.62
+top_solid_infill_speed = 150
+
+[print:*0.8 nozzle*]
+bridge_speed = 30
+external_perimeter_extrusion_width = 0.82
+external_perimeter_speed = 120
+extrusion_width = 0.82
+first_layer_extrusion_width = 0.82
+first_layer_height = 0.4
+first_layer_infill_speed = 55
+first_layer_speed = 35
+gap_fill_speed = 50
+infill_extrusion_width = 0.82
+infill_speed = 100
+overhang_speed_0 = 5
+overhang_speed_1 = 25
+perimeter_extrusion_width = 0.82
+perimeter_speed = 150
+solid_infill_extrusion_width = 0.82
+solid_infill_speed = 150
+support_material_extrusion_width = 0.82
+support_tree_tip_diameter = 1.6
+top_fill_pattern = monotonic
+top_infill_extrusion_width = 0.82
+top_solid_infill_speed = 150
 
 # Layer Hight Print preset
 # 0.2 nozzle
@@ -283,7 +327,7 @@ overhang_speed_1 = 10
 overhang_speed_2 = 30
 overhang_speed_3 = 60
 perimeter_speed = 350
-solid_infill_speed = 320
+solid_infill_speed = 300
 top_solid_layers = 6
 
 [print:*0.16mm High*]
@@ -296,7 +340,7 @@ overhang_speed_0 = 10
 overhang_speed_1 = 10
 overhang_speed_2 = 30
 overhang_speed_3 = 60
-solid_infill_speed = 270
+solid_infill_speed = 250
 top_solid_layers = 5
 
 [print:*0.20mm Fine*]
@@ -314,7 +358,33 @@ gap_fill_speed = 230
 infill_speed = 220
 layer_height = 0.24
 perimeter_speed = 230
-solid_infill_speed = 230
+solid_infill_speed = 200
+
+# 0.6 nozzle
+[print:*0.24mm High*]
+inherits = *0.6 nozzle*
+layer_height = 0.24
+
+[print:*0.30mm Fine*]
+inherits = *0.6 nozzle*
+layer_height = 0.3
+
+[print:*0.36mm Quick*]
+inherits = *0.6 nozzle*
+layer_height = 0.36
+
+# 0.8 nozzle
+[print:*0.32mm High*]
+inherits = *0.8 nozzle*
+layer_height = 0.32
+
+[print:*0.40mm Fine*]
+inherits = *0.8 nozzle*
+layer_height = 0.4
+
+[print:*0.48mm Quick*]
+inherits = *0.8 nozzle*
+layer_height = 0.48
 
 # Print preset
 # X-MAX 3 0.2 nozzle Print preset
@@ -347,6 +417,32 @@ compatible_printers_condition = printer_model=="X-MAX 3" and nozzle_diameter[0]=
 inherits = *X-MAX 3*; *0.24mm Quick*
 compatible_printers_condition = printer_model=="X-MAX 3" and nozzle_diameter[0]==0.4
 
+# X-MAX 3 0.6 nozzle Print preset
+[print:0.24mm High @X-MAX 3 0.6 nozzle]
+inherits = *X-MAX 3*; *0.24mm High*
+compatible_printers_condition = printer_model=="X-MAX 3" and nozzle_diameter[0]==0.6
+
+[print:0.30mm Fine @X-MAX 3 0.6 nozzle]
+inherits = *X-MAX 3*; *0.30mm Fine*
+compatible_printers_condition = printer_model=="X-MAX 3" and nozzle_diameter[0]==0.6
+
+[print:0.36mm Fine @X-MAX 3 0.6 nozzle]
+inherits = *X-MAX 3*; *0.36mm Quick*
+compatible_printers_condition = printer_model=="X-MAX 3" and nozzle_diameter[0]==0.6
+
+# X-MAX 3 0.8 nozzle Print preset
+[print:0.32mm High @X-MAX 3 0.8 nozzle]
+inherits = *X-MAX 3*; *0.32mm High*
+compatible_printers_condition = printer_model=="X-MAX 3" and nozzle_diameter[0]==0.8
+
+[print:0.40mm Fine @X-MAX 3 0.8 nozzle]
+inherits = *X-MAX 3*; *0.40mm Fine*
+compatible_printers_condition = printer_model=="X-MAX 3" and nozzle_diameter[0]==0.8
+
+[print:0.48mm Fine @X-MAX 3 0.8 nozzle]
+inherits = *X-MAX 3*; *0.48mm Quick*
+compatible_printers_condition = printer_model=="X-MAX 3" and nozzle_diameter[0]==0.8
+
 # X-Plus 3 0.2 nozzle Print preset
 [print:0.08mm Extra High @X-Plus 3 0.2 nozzle]
 inherits = *X-Plus 3*; *0.08mm Extra High*
@@ -377,6 +473,32 @@ compatible_printers_condition = printer_model=="X-Plus 3" and nozzle_diameter[0]
 inherits = *X-Plus 3*; *0.24mm Quick*
 compatible_printers_condition = printer_model=="X-Plus 3" and nozzle_diameter[0]==0.4
 
+# X-Plus 3 0.6 nozzle Print preset
+[print:0.24mm High @X-Plus 3 0.6 nozzle]
+inherits = *X-Plus 3*; *0.24mm High*
+compatible_printers_condition = printer_model=="X-Plus 3" and nozzle_diameter[0]==0.6
+
+[print:0.30mm Fine @X-Plus 3 0.6 nozzle]
+inherits = *X-Plus 3*; *0.30mm Fine*
+compatible_printers_condition = printer_model=="X-Plus 3" and nozzle_diameter[0]==0.6
+
+[print:0.36mm Fine @X-Plus 3 0.6 nozzle]
+inherits = *X-Plus 3*; *0.36mm Quick*
+compatible_printers_condition = printer_model=="X-Plus 3" and nozzle_diameter[0]==0.6
+
+# X-Plus 3 0.8 nozzle Print preset
+[print:0.32mm High @X-Plus 3 0.8 nozzle]
+inherits = *X-Plus 3*; *0.32mm High*
+compatible_printers_condition = printer_model=="X-Plus 3" and nozzle_diameter[0]==0.8
+
+[print:0.40mm Fine @X-Plus 3 0.8 nozzle]
+inherits = *X-Plus 3*; *0.40mm Fine*
+compatible_printers_condition = printer_model=="X-Plus 3" and nozzle_diameter[0]==0.8
+
+[print:0.48mm Fine @X-Plus 3 0.8 nozzle]
+inherits = *X-Plus 3*; *0.48mm Quick*
+compatible_printers_condition = printer_model=="X-Plus 3" and nozzle_diameter[0]==0.8
+
 # X-smart 3 0.2 nozzle Print preset
 [print:0.08mm Extra High @X-smart 3 0.2 nozzle]
 inherits = *X-smart 3*; *0.08mm Extra High*
@@ -407,6 +529,32 @@ compatible_printers_condition = printer_model=="X-smart 3" and nozzle_diameter[0
 inherits = *X-smart 3*; *0.24mm Quick*
 compatible_printers_condition = printer_model=="X-smart 3" and nozzle_diameter[0]==0.4
 
+# X-smart 3 0.6 nozzle Print preset
+[print:0.24mm High @X-smart 3 0.6 nozzle]
+inherits = *X-smart 3*; *0.24mm High*
+compatible_printers_condition = printer_model=="X-smart 3" and nozzle_diameter[0]==0.6
+
+[print:0.30mm Fine @X-smart 3 0.6 nozzle]
+inherits = *X-smart 3*; *0.30mm Fine*
+compatible_printers_condition = printer_model=="X-smart 3" and nozzle_diameter[0]==0.6
+
+[print:0.36mm Fine @X-smart 3 0.6 nozzle]
+inherits = *X-smart 3*; *0.36mm Quick*
+compatible_printers_condition = printer_model=="X-smart 3" and nozzle_diameter[0]==0.6
+
+# X-smart 3 0.8 nozzle Print preset
+[print:0.32mm High @X-smart 3 0.8 nozzle]
+inherits = *X-smart 3*; *0.32mm High*
+compatible_printers_condition = printer_model=="X-smart 3" and nozzle_diameter[0]==0.8
+
+[print:0.40mm Fine @X-smart 3 0.8 nozzle]
+inherits = *X-smart 3*; *0.40mm Fine*
+compatible_printers_condition = printer_model=="X-smart 3" and nozzle_diameter[0]==0.8
+
+[print:0.48mm Fine @X-smart 3 0.8 nozzle]
+inherits = *X-smart 3*; *0.48mm Quick*
+compatible_printers_condition = printer_model=="X-smart 3" and nozzle_diameter[0]==0.8
+
 # Common filament preset
 [filament:*common*]
 advance_pressure = 0.031
@@ -438,7 +586,7 @@ filament_diameter = 1.75
 filament_load_time = 0
 filament_loading_speed = 28
 filament_loading_speed_start = 3
-filament_max_volumetric_speed = 21
+filament_max_volumetric_speed = 20
 filament_minimal_purge_on_wipe_tower = 15
 filament_notes = ""
 filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
@@ -564,7 +712,7 @@ fan_below_layer_time = 35
 filament_colour = #F0E68C
 filament_density = 1.07
 filament_max_volumetric_speed = 16
-filament_type = ABS
+filament_type = ASA
 first_layer_bed_temperature = 90
 first_layer_temperature = 250
 max_fan_speed = 50
@@ -674,7 +822,7 @@ inherits = *common*
 inherits = *common*
 filament_colour = #0073E6
 filament_density = 1.42
-filament_max_volumetric_speed = 22
+filament_max_volumetric_speed = 21
 
 [filament:*QIDI UltraPA*]
 inherits = *common*
@@ -875,6 +1023,161 @@ compatible_printers_condition = printer_model=="X-MAX 3" and nozzle_diameter[0]=
 inherits = *Generic TPU 95A*
 compatible_printers_condition = printer_model=="X-MAX 3" and nozzle_diameter[0]==0.4
 
+# X-MAX 3 0.6 nozzle QIDI filament preset
+[filament:QIDI ABS Odorless @X-MAX 3 0.6 nozzle]
+inherits = *QIDI ABS Odorless*
+advance_pressure = 0.014
+compatible_printers_condition = printer_model=="X-MAX 3" and nozzle_diameter[0]==0.6
+
+[filament:QIDI ABS Rapido @X-MAX 3 0.6 nozzle]
+inherits = *QIDI ABS Rapido*
+advance_pressure = 0.014
+compatible_printers_condition = printer_model=="X-MAX 3" and nozzle_diameter[0]==0.6
+
+[filament:QIDI ABS-GF @X-MAX 3 0.6 nozzle]
+inherits = *QIDI ABS-GF*
+compatible_printers_condition = printer_model=="X-MAX 3" and nozzle_diameter[0]==0.6
+
+[filament:QIDI ASA @X-MAX 3 0.6 nozzle]
+inherits = *QIDI ASA*
+advance_pressure = 0.014
+compatible_printers_condition = printer_model=="X-MAX 3" and nozzle_diameter[0]==0.6
+
+[filament:QIDI PA12-CF @X-MAX 3 0.6 nozzle]
+inherits = *QIDI PA12-CF*
+compatible_printers_condition = printer_model=="X-MAX 3" and nozzle_diameter[0]==0.6
+
+[filament:QIDI PAHT-CF @X-MAX 3 0.6 nozzle]
+inherits = *QIDI PAHT-CF*
+compatible_printers_condition = printer_model=="X-MAX 3" and nozzle_diameter[0]==0.6
+
+[filament:QIDI PET-CF @X-MAX 3 0.6 nozzle]
+inherits = *QIDI PET-CF*
+compatible_printers_condition = printer_model=="X-MAX 3" and nozzle_diameter[0]==0.6
+
+[filament:QIDI PETG-Tough @X-MAX 3 0.6 nozzle]
+inherits = *QIDI PETG-Tough*
+temperature = 240
+compatible_printers_condition = printer_model=="X-MAX 3" and nozzle_diameter[0]==0.6
+
+[filament:QIDI PLA Rapido @X-MAX 3 0.6 nozzle]
+inherits = *QIDI PLA Rapido*
+advance_pressure = 0.016
+slowdown_below_layer_time = 6
+compatible_printers_condition = printer_model=="X-MAX 3" and nozzle_diameter[0]==0.6
+
+[filament:QIDI PLA Rapido Matte @X-MAX 3 0.6 nozzle]
+inherits = *QIDI PLA Rapido Matte*
+advance_pressure = 0.016
+slowdown_below_layer_time = 6
+compatible_printers_condition = printer_model=="X-MAX 3" and nozzle_diameter[0]==0.6
+
+[filament:QIDI UltraPA @X-MAX 3 0.6 nozzle]
+inherits = *QIDI UltraPA*
+compatible_printers_condition = printer_model=="X-MAX 3" and nozzle_diameter[0]==0.6
+
+# X-MAX 3 0.6 nozzle Generic filament preset
+[filament:Generic ABS @X-MAX 3 0.6 nozzle]
+inherits = *Generic ABS*
+advance_pressure = 0.014
+compatible_printers_condition = printer_model=="X-MAX 3" and nozzle_diameter[0]==0.6
+
+[filament:Generic PETG @X-MAX 3 0.6 nozzle]
+inherits = *Generic PETG*
+temperature = 240
+compatible_printers_condition = printer_model=="X-MAX 3" and nozzle_diameter[0]==0.6
+
+[filament:Generic PLA @X-MAX 3 0.6 nozzle]
+inherits = *Generic PLA*
+advance_pressure = 0.016
+slowdown_below_layer_time = 6
+compatible_printers_condition = printer_model=="X-MAX 3" and nozzle_diameter[0]==0.6
+
+[filament:Generic TPU 95A @X-MAX 3 0.6 nozzle]
+inherits = *Generic TPU 95A*
+compatible_printers_condition = printer_model=="X-MAX 3" and nozzle_diameter[0]==0.6
+
+# X-MAX 3 0.8 nozzle QIDI filament preset
+[filament:QIDI ABS Odorless @X-MAX 3 0.8 nozzle]
+inherits = *QIDI ABS Odorless*
+advance_pressure = 0.011
+min_print_speed = 10
+temperature = 260
+compatible_printers_condition = printer_model=="X-MAX 3" and nozzle_diameter[0]==0.8
+
+[filament:QIDI ABS Rapido @X-MAX 3 0.8 nozzle]
+inherits = *QIDI ABS Rapido*
+advance_pressure = 0.011
+min_print_speed = 10
+temperature = 260
+compatible_printers_condition = printer_model=="X-MAX 3" and nozzle_diameter[0]==0.8
+
+[filament:QIDI ABS-GF @X-MAX 3 0.8 nozzle]
+inherits = *QIDI ABS-GF*
+compatible_printers_condition = printer_model=="X-MAX 3" and nozzle_diameter[0]==0.8
+
+[filament:QIDI ASA @X-MAX 3 0.8 nozzle]
+inherits = *QIDI ASA*
+advance_pressure = 0.011
+min_print_speed = 10
+temperature = 260
+compatible_printers_condition = printer_model=="X-MAX 3" and nozzle_diameter[0]==0.8
+
+[filament:QIDI PA12-CF @X-MAX 3 0.8 nozzle]
+inherits = *QIDI PA12-CF*
+compatible_printers_condition = printer_model=="X-MAX 3" and nozzle_diameter[0]==0.8
+
+[filament:QIDI PAHT-CF @X-MAX 3 0.8 nozzle]
+inherits = *QIDI PAHT-CF*
+compatible_printers_condition = printer_model=="X-MAX 3" and nozzle_diameter[0]==0.8
+
+[filament:QIDI PET-CF @X-MAX 3 0.8 nozzle]
+inherits = *QIDI PET-CF*
+compatible_printers_condition = printer_model=="X-MAX 3" and nozzle_diameter[0]==0.8
+
+[filament:QIDI PETG-Tough @X-MAX 3 0.8 nozzle]
+inherits = *QIDI PETG-Tough*
+temperature = 240
+compatible_printers_condition = printer_model=="X-MAX 3" and nozzle_diameter[0]==0.8
+
+[filament:QIDI PLA Rapido @X-MAX 3 0.8 nozzle]
+inherits = *QIDI PLA Rapido*
+advance_pressure = 0.008
+slowdown_below_layer_time = 6
+compatible_printers_condition = printer_model=="X-MAX 3" and nozzle_diameter[0]==0.8
+
+[filament:QIDI PLA Rapido Matte @X-MAX 3 0.8 nozzle]
+inherits = *QIDI PLA Rapido Matte*
+advance_pressure = 0.008
+slowdown_below_layer_time = 6
+compatible_printers_condition = printer_model=="X-MAX 3" and nozzle_diameter[0]==0.8
+
+[filament:QIDI UltraPA @X-MAX 3 0.8 nozzle]
+inherits = *QIDI UltraPA*
+compatible_printers_condition = printer_model=="X-MAX 3" and nozzle_diameter[0]==0.8
+
+# X-MAX 3 0.8 nozzle Generic filament preset
+[filament:Generic ABS @X-MAX 3 0.8 nozzle]
+inherits = *Generic ABS*
+advance_pressure = 0.011
+compatible_printers_condition = printer_model=="X-MAX 3" and nozzle_diameter[0]==0.8
+
+[filament:Generic PETG @X-MAX 3 0.8 nozzle]
+inherits = *Generic PETG*
+temperature = 240
+compatible_printers_condition = printer_model=="X-MAX 3" and nozzle_diameter[0]==0.8
+
+[filament:Generic PLA @X-MAX 3 0.8 nozzle]
+inherits = *Generic PLA*
+advance_pressure = 0.008
+slowdown_below_layer_time = 6
+compatible_printers_condition = printer_model=="X-MAX 3" and nozzle_diameter[0]==0.8
+
+[filament:Generic TPU 95A @X-MAX 3 0.8 nozzle]
+inherits = *Generic TPU 95A*
+temperature = 220
+compatible_printers_condition = printer_model=="X-MAX 3" and nozzle_diameter[0]==0.8
+
 # X-Plus 3 0.2 nozzle QIDI filament preset
 [filament:QIDI ABS Odorless @X-Plus 3 0.2 nozzle]
 inherits = *QIDI ABS Odorless*
@@ -987,6 +1290,161 @@ compatible_printers_condition = printer_model=="X-Plus 3" and nozzle_diameter[0]
 inherits = *Generic TPU 95A*
 compatible_printers_condition = printer_model=="X-Plus 3" and nozzle_diameter[0]==0.4
 
+# X-Plus 3 0.6 nozzle QIDI filament preset
+[filament:QIDI ABS Odorless @X-Plus 3 0.6 nozzle]
+inherits = *QIDI ABS Odorless*
+advance_pressure = 0.014
+compatible_printers_condition = printer_model=="X-Plus 3" and nozzle_diameter[0]==0.6
+
+[filament:QIDI ABS Rapido @X-Plus 3 0.6 nozzle]
+inherits = *QIDI ABS Rapido*
+advance_pressure = 0.014
+compatible_printers_condition = printer_model=="X-Plus 3" and nozzle_diameter[0]==0.6
+
+[filament:QIDI ABS-GF @X-Plus 3 0.6 nozzle]
+inherits = *QIDI ABS-GF*
+compatible_printers_condition = printer_model=="X-Plus 3" and nozzle_diameter[0]==0.6
+
+[filament:QIDI ASA @X-Plus 3 0.6 nozzle]
+inherits = *QIDI ASA*
+advance_pressure = 0.014
+compatible_printers_condition = printer_model=="X-Plus 3" and nozzle_diameter[0]==0.6
+
+[filament:QIDI PA12-CF @X-Plus 3 0.6 nozzle]
+inherits = *QIDI PA12-CF*
+compatible_printers_condition = printer_model=="X-Plus 3" and nozzle_diameter[0]==0.6
+
+[filament:QIDI PAHT-CF @X-Plus 3 0.6 nozzle]
+inherits = *QIDI PAHT-CF*
+compatible_printers_condition = printer_model=="X-Plus 3" and nozzle_diameter[0]==0.6
+
+[filament:QIDI PET-CF @X-Plus 3 0.6 nozzle]
+inherits = *QIDI PET-CF*
+compatible_printers_condition = printer_model=="X-Plus 3" and nozzle_diameter[0]==0.6
+
+[filament:QIDI PETG-Tough @X-Plus 3 0.6 nozzle]
+inherits = *QIDI PETG-Tough*
+temperature = 240
+compatible_printers_condition = printer_model=="X-Plus 3" and nozzle_diameter[0]==0.6
+
+[filament:QIDI PLA Rapido @X-Plus 3 0.6 nozzle]
+inherits = *QIDI PLA Rapido*
+advance_pressure = 0.016
+slowdown_below_layer_time = 6
+compatible_printers_condition = printer_model=="X-Plus 3" and nozzle_diameter[0]==0.6
+
+[filament:QIDI PLA Rapido Matte @X-Plus 3 0.6 nozzle]
+inherits = *QIDI PLA Rapido Matte*
+advance_pressure = 0.016
+slowdown_below_layer_time = 6
+compatible_printers_condition = printer_model=="X-Plus 3" and nozzle_diameter[0]==0.6
+
+[filament:QIDI UltraPA @X-Plus 3 0.6 nozzle]
+inherits = *QIDI UltraPA*
+compatible_printers_condition = printer_model=="X-Plus 3" and nozzle_diameter[0]==0.6
+
+# X-Plus 3 0.6 nozzle Generic filament preset
+[filament:Generic ABS @X-Plus 3 0.6 nozzle]
+inherits = *Generic ABS*
+advance_pressure = 0.014
+compatible_printers_condition = printer_model=="X-Plus 3" and nozzle_diameter[0]==0.6
+
+[filament:Generic PETG @X-Plus 3 0.6 nozzle]
+inherits = *Generic PETG*
+temperature = 240
+compatible_printers_condition = printer_model=="X-Plus 3" and nozzle_diameter[0]==0.6
+
+[filament:Generic PLA @X-Plus 3 0.6 nozzle]
+inherits = *Generic PLA*
+advance_pressure = 0.016
+slowdown_below_layer_time = 6
+compatible_printers_condition = printer_model=="X-Plus 3" and nozzle_diameter[0]==0.6
+
+[filament:Generic TPU 95A @X-Plus 3 0.6 nozzle]
+inherits = *Generic TPU 95A*
+compatible_printers_condition = printer_model=="X-Plus 3" and nozzle_diameter[0]==0.6
+
+# X-Plus 3 0.8 nozzle QIDI filament preset
+[filament:QIDI ABS Odorless @X-Plus 3 0.8 nozzle]
+inherits = *QIDI ABS Odorless*
+advance_pressure = 0.011
+min_print_speed = 10
+temperature = 260
+compatible_printers_condition = printer_model=="X-Plus 3" and nozzle_diameter[0]==0.8
+
+[filament:QIDI ABS Rapido @X-Plus 3 0.8 nozzle]
+inherits = *QIDI ABS Rapido*
+advance_pressure = 0.011
+min_print_speed = 10
+temperature = 260
+compatible_printers_condition = printer_model=="X-Plus 3" and nozzle_diameter[0]==0.8
+
+[filament:QIDI ABS-GF @X-Plus 3 0.8 nozzle]
+inherits = *QIDI ABS-GF*
+compatible_printers_condition = printer_model=="X-Plus 3" and nozzle_diameter[0]==0.8
+
+[filament:QIDI ASA @X-Plus 3 0.8 nozzle]
+inherits = *QIDI ASA*
+advance_pressure = 0.011
+min_print_speed = 10
+temperature = 260
+compatible_printers_condition = printer_model=="X-Plus 3" and nozzle_diameter[0]==0.8
+
+[filament:QIDI PA12-CF @X-Plus 3 0.8 nozzle]
+inherits = *QIDI PA12-CF*
+compatible_printers_condition = printer_model=="X-Plus 3" and nozzle_diameter[0]==0.8
+
+[filament:QIDI PAHT-CF @X-Plus 3 0.8 nozzle]
+inherits = *QIDI PAHT-CF*
+compatible_printers_condition = printer_model=="X-Plus 3" and nozzle_diameter[0]==0.8
+
+[filament:QIDI PET-CF @X-Plus 3 0.8 nozzle]
+inherits = *QIDI PET-CF*
+compatible_printers_condition = printer_model=="X-Plus 3" and nozzle_diameter[0]==0.8
+
+[filament:QIDI PETG-Tough @X-Plus 3 0.8 nozzle]
+inherits = *QIDI PETG-Tough*
+temperature = 240
+compatible_printers_condition = printer_model=="X-Plus 3" and nozzle_diameter[0]==0.8
+
+[filament:QIDI PLA Rapido @X-Plus 3 0.8 nozzle]
+inherits = *QIDI PLA Rapido*
+advance_pressure = 0.008
+slowdown_below_layer_time = 6
+compatible_printers_condition = printer_model=="X-Plus 3" and nozzle_diameter[0]==0.8
+
+[filament:QIDI PLA Rapido Matte @X-Plus 3 0.8 nozzle]
+inherits = *QIDI PLA Rapido Matte*
+advance_pressure = 0.008
+slowdown_below_layer_time = 6
+compatible_printers_condition = printer_model=="X-Plus 3" and nozzle_diameter[0]==0.8
+
+[filament:QIDI UltraPA @X-Plus 3 0.8 nozzle]
+inherits = *QIDI UltraPA*
+compatible_printers_condition = printer_model=="X-Plus 3" and nozzle_diameter[0]==0.8
+
+# X-Plus 3 0.8 nozzle Generic filament preset
+[filament:Generic ABS @X-Plus 3 0.8 nozzle]
+inherits = *Generic ABS*
+advance_pressure = 0.011
+compatible_printers_condition = printer_model=="X-Plus 3" and nozzle_diameter[0]==0.8
+
+[filament:Generic PETG @X-Plus 3 0.8 nozzle]
+inherits = *Generic PETG*
+temperature = 240
+compatible_printers_condition = printer_model=="X-Plus 3" and nozzle_diameter[0]==0.8
+
+[filament:Generic PLA @X-Plus 3 0.8 nozzle]
+inherits = *Generic PLA*
+advance_pressure = 0.008
+slowdown_below_layer_time = 6
+compatible_printers_condition = printer_model=="X-Plus 3" and nozzle_diameter[0]==0.8
+
+[filament:Generic TPU 95A @X-Plus 3 0.8 nozzle]
+inherits = *Generic TPU 95A*
+temperature = 220
+compatible_printers_condition = printer_model=="X-Plus 3" and nozzle_diameter[0]==0.8
+
 # X-smart 3 0.2 nozzle QIDI filament preset
 [filament:QIDI ABS Odorless @X-smart 3 0.2 nozzle]
 inherits = *QIDI ABS Odorless*
@@ -1120,6 +1578,161 @@ compatible_printers_condition = printer_model=="X-smart 3" and nozzle_diameter[0
 inherits = *Generic TPU 95A*
 compatible_printers_condition = printer_model=="X-smart 3" and nozzle_diameter[0]==0.4
 
+# X-smart 3 0.6 nozzle QIDI filament preset
+[filament:QIDI ABS Odorless @X-smart 3 0.6 nozzle]
+inherits = *QIDI ABS Odorless*
+advance_pressure = 0.014
+compatible_printers_condition = printer_model=="X-smart 3" and nozzle_diameter[0]==0.6
+
+[filament:QIDI ABS Rapido @X-smart 3 0.6 nozzle]
+inherits = *QIDI ABS Rapido*
+advance_pressure = 0.014
+compatible_printers_condition = printer_model=="X-smart 3" and nozzle_diameter[0]==0.6
+
+[filament:QIDI ABS-GF @X-smart 3 0.6 nozzle]
+inherits = *QIDI ABS-GF*
+compatible_printers_condition = printer_model=="X-smart 3" and nozzle_diameter[0]==0.6
+
+[filament:QIDI ASA @X-smart 3 0.6 nozzle]
+inherits = *QIDI ASA*
+advance_pressure = 0.014
+compatible_printers_condition = printer_model=="X-smart 3" and nozzle_diameter[0]==0.6
+
+[filament:QIDI PA12-CF @X-smart 3 0.6 nozzle]
+inherits = *QIDI PA12-CF*
+compatible_printers_condition = printer_model=="X-smart 3" and nozzle_diameter[0]==0.6
+
+[filament:QIDI PAHT-CF @X-smart 3 0.6 nozzle]
+inherits = *QIDI PAHT-CF*
+compatible_printers_condition = printer_model=="X-smart 3" and nozzle_diameter[0]==0.6
+
+[filament:QIDI PET-CF @X-smart 3 0.6 nozzle]
+inherits = *QIDI PET-CF*
+compatible_printers_condition = printer_model=="X-smart 3" and nozzle_diameter[0]==0.6
+
+[filament:QIDI PETG-Tough @X-smart 3 0.6 nozzle]
+inherits = *QIDI PETG-Tough*
+temperature = 240
+compatible_printers_condition = printer_model=="X-smart 3" and nozzle_diameter[0]==0.6
+
+[filament:QIDI PLA Rapido @X-smart 3 0.6 nozzle]
+inherits = *QIDI PLA Rapido*
+advance_pressure = 0.016
+slowdown_below_layer_time = 6
+compatible_printers_condition = printer_model=="X-smart 3" and nozzle_diameter[0]==0.6
+
+[filament:QIDI PLA Rapido Matte @X-smart 3 0.6 nozzle]
+inherits = *QIDI PLA Rapido Matte*
+advance_pressure = 0.016
+slowdown_below_layer_time = 6
+compatible_printers_condition = printer_model=="X-smart 3" and nozzle_diameter[0]==0.6
+
+[filament:QIDI UltraPA @X-smart 3 0.6 nozzle]
+inherits = *QIDI UltraPA*
+compatible_printers_condition = printer_model=="X-smart 3" and nozzle_diameter[0]==0.6
+
+# X-smart 3 0.6 nozzle Generic filament preset
+[filament:Generic ABS @X-smart 3 0.6 nozzle]
+inherits = *Generic ABS*
+advance_pressure = 0.014
+compatible_printers_condition = printer_model=="X-smart 3" and nozzle_diameter[0]==0.6
+
+[filament:Generic PETG @X-smart 3 0.6 nozzle]
+inherits = *Generic PETG*
+temperature = 240
+compatible_printers_condition = printer_model=="X-smart 3" and nozzle_diameter[0]==0.6
+
+[filament:Generic PLA @X-smart 3 0.6 nozzle]
+inherits = *Generic PLA*
+advance_pressure = 0.016
+slowdown_below_layer_time = 6
+compatible_printers_condition = printer_model=="X-smart 3" and nozzle_diameter[0]==0.6
+
+[filament:Generic TPU 95A @X-smart 3 0.6 nozzle]
+inherits = *Generic TPU 95A*
+compatible_printers_condition = printer_model=="X-smart 3" and nozzle_diameter[0]==0.6
+
+# X-smart 3 0.8 nozzle QIDI filament preset
+[filament:QIDI ABS Odorless @X-smart 3 0.8 nozzle]
+inherits = *QIDI ABS Odorless*
+advance_pressure = 0.011
+min_print_speed = 10
+temperature = 260
+compatible_printers_condition = printer_model=="X-smart 3" and nozzle_diameter[0]==0.8
+
+[filament:QIDI ABS Rapido @X-smart 3 0.8 nozzle]
+inherits = *QIDI ABS Rapido*
+advance_pressure = 0.011
+min_print_speed = 10
+temperature = 260
+compatible_printers_condition = printer_model=="X-smart 3" and nozzle_diameter[0]==0.8
+
+[filament:QIDI ABS-GF @X-smart 3 0.8 nozzle]
+inherits = *QIDI ABS-GF*
+compatible_printers_condition = printer_model=="X-smart 3" and nozzle_diameter[0]==0.8
+
+[filament:QIDI ASA @X-smart 3 0.8 nozzle]
+inherits = *QIDI ASA*
+advance_pressure = 0.011
+min_print_speed = 10
+temperature = 260
+compatible_printers_condition = printer_model=="X-smart 3" and nozzle_diameter[0]==0.8
+
+[filament:QIDI PA12-CF @X-smart 3 0.8 nozzle]
+inherits = *QIDI PA12-CF*
+compatible_printers_condition = printer_model=="X-smart 3" and nozzle_diameter[0]==0.8
+
+[filament:QIDI PAHT-CF @X-smart 3 0.8 nozzle]
+inherits = *QIDI PAHT-CF*
+compatible_printers_condition = printer_model=="X-smart 3" and nozzle_diameter[0]==0.8
+
+[filament:QIDI PET-CF @X-smart 3 0.8 nozzle]
+inherits = *QIDI PET-CF*
+compatible_printers_condition = printer_model=="X-smart 3" and nozzle_diameter[0]==0.8
+
+[filament:QIDI PETG-Tough @X-smart 3 0.8 nozzle]
+inherits = *QIDI PETG-Tough*
+temperature = 240
+compatible_printers_condition = printer_model=="X-smart 3" and nozzle_diameter[0]==0.8
+
+[filament:QIDI PLA Rapido @X-smart 3 0.8 nozzle]
+inherits = *QIDI PLA Rapido*
+advance_pressure = 0.008
+slowdown_below_layer_time = 6
+compatible_printers_condition = printer_model=="X-smart 3" and nozzle_diameter[0]==0.8
+
+[filament:QIDI PLA Rapido Matte @X-smart 3 0.8 nozzle]
+inherits = *QIDI PLA Rapido Matte*
+advance_pressure = 0.008
+slowdown_below_layer_time = 6
+compatible_printers_condition = printer_model=="X-smart 3" and nozzle_diameter[0]==0.8
+
+[filament:QIDI UltraPA @X-smart 3 0.8 nozzle]
+inherits = *QIDI UltraPA*
+compatible_printers_condition = printer_model=="X-smart 3" and nozzle_diameter[0]==0.8
+
+# X-smart 3 0.8 nozzle Generic filament preset
+[filament:Generic ABS @X-smart 3 0.8 nozzle]
+inherits = *Generic ABS*
+advance_pressure = 0.011
+compatible_printers_condition = printer_model=="X-smart 3" and nozzle_diameter[0]==0.8
+
+[filament:Generic PETG @X-smart 3 0.8 nozzle]
+inherits = *Generic PETG*
+temperature = 240
+compatible_printers_condition = printer_model=="X-smart 3" and nozzle_diameter[0]==0.8
+
+[filament:Generic PLA @X-smart 3 0.8 nozzle]
+inherits = *Generic PLA*
+advance_pressure = 0.008
+slowdown_below_layer_time = 6
+compatible_printers_condition = printer_model=="X-smart 3" and nozzle_diameter[0]==0.8
+
+[filament:Generic TPU 95A @X-smart 3 0.8 nozzle]
+inherits = *Generic TPU 95A*
+temperature = 220
+compatible_printers_condition = printer_model=="X-smart 3" and nozzle_diameter[0]==0.8
+
 # Common printer preset
 [printer:*common*]
 autoemit_temperature_commands = 1
@@ -1230,6 +1843,27 @@ inherits = *X-MAX 3*
 default_filament_profile = Generic PLA @X-MAX 3 0.4 nozzle
 default_print_profile = 0.20mm Fine @X-MAX 3 0.4 nozzle
 
+[printer:X-MAX 3 0.6 nozzle]
+inherits = *X-MAX 3*
+default_filament_profile = Generic PLA @X-MAX 3 0.6 nozzle
+default_print_profile = 0.30mm Fine @X-MAX 3 0.6 nozzle
+max_layer_height = 0.42
+min_layer_height = 0.12
+nozzle_diameter = 0.6
+printer_variant = 0.6
+retract_before_travel = 3
+retract_length = 1.4
+
+[printer:X-MAX 3 0.8 nozzle]
+inherits = *X-MAX 3*
+default_filament_profile = Generic PLA @X-MAX 3 0.8 nozzle
+default_print_profile = 0.40mm Fine @X-MAX 3 0.8 nozzle
+max_layer_height = 0.56
+min_layer_height = 0.16
+nozzle_diameter = 0.8
+printer_variant = 0.8
+retract_length = 3
+
 # X-Plus 3 preset
 [printer:*X-Plus 3*]
 inherits = *common*
@@ -1255,6 +1889,27 @@ inherits = *X-Plus 3*
 default_filament_profile = Generic PLA @X-Plus 3 0.4 nozzle
 default_print_profile = 0.20mm Fine @X-Plus 3 0.4 nozzle
 
+[printer:X-Plus 3 0.6 nozzle]
+inherits = *X-Plus 3*
+default_filament_profile = Generic PLA @X-Plus 3 0.6 nozzle
+default_print_profile = 0.30mm Fine @X-Plus 3 0.6 nozzle
+max_layer_height = 0.42
+min_layer_height = 0.12
+nozzle_diameter = 0.6
+printer_variant = 0.6
+retract_before_travel = 3
+retract_length = 1.4
+
+[printer:X-Plus 3 0.8 nozzle]
+inherits = *X-Plus 3*
+default_filament_profile = Generic PLA @X-Plus 3 0.8 nozzle
+default_print_profile = 0.40mm Fine @X-Plus 3 0.8 nozzle
+max_layer_height = 0.56
+min_layer_height = 0.16
+nozzle_diameter = 0.8
+printer_variant = 0.8
+retract_length = 3
+
 # X-smart 3 preset
 [printer:*X-smart 3*]
 inherits = *common*
@@ -1277,3 +1932,24 @@ retract_length = 0.4
 inherits = *X-smart 3*
 default_filament_profile = Generic PLA @X-smart 3 0.4 nozzle
 default_print_profile = 0.20mm Fine @X-smart 3 0.4 nozzle
+
+[printer:X-smart 3 0.6 nozzle]
+inherits = *X-smart 3*
+default_filament_profile = Generic PLA @X-smart 3 0.6 nozzle
+default_print_profile = 0.30mm Fine @X-smart 3 0.6 nozzle
+max_layer_height = 0.42
+min_layer_height = 0.12
+nozzle_diameter = 0.6
+printer_variant = 0.6
+retract_before_travel = 3
+retract_length = 1.4
+
+[printer:X-smart 3 0.8 nozzle]
+inherits = *X-smart 3*
+default_filament_profile = Generic PLA @X-smart 3 0.8 nozzle
+default_print_profile = 0.40mm Fine @X-smart 3 0.8 nozzle
+max_layer_height = 0.56
+min_layer_height = 0.16
+nozzle_diameter = 0.8
+printer_variant = 0.8
+retract_length = 3