diff --git a/resources/profiles/QIDITechnology.ini b/resources/profiles/QIDITechnology.ini
index 955d5ac..6408152 100644
--- a/resources/profiles/QIDITechnology.ini
+++ b/resources/profiles/QIDITechnology.ini
@@ -98,8 +98,8 @@ gcode_label_objects = firmware
 gcode_resolution = 0.0125
 gcode_substitutions = 
 infill_acceleration = 10000
-infill_anchor = 600%
-infill_anchor_max = 50
+infill_anchor = 400%
+infill_anchor_max = 20
 infill_every_layers = 1
 infill_extruder = 1
 infill_extrusion_width = 0.45
@@ -154,7 +154,7 @@ slice_closing_radius = 0.049
 slicing_mode = regular
 small_perimeter_speed = 100
 solid_infill_acceleration = 10000
-solid_infill_below_area = 10
+solid_infill_below_area = 15
 solid_infill_every_layers = 0
 solid_infill_extruder = 1
 solid_infill_extrusion_width = 0.42
@@ -1893,7 +1893,8 @@ autoemit_temperature_commands = 1
 auxiliary_fan = 0
 bed_custom_model = 
 bed_custom_texture = 
-bed_exclude_area = 
+bed_exclude_area_0 = 
+bed_exclude_area_1 = 
 bed_shape = 0x0,325x0,325x325,0x325
 before_layer_gcode = G92 E0
 between_objects_gcode = 
@@ -1969,13 +1970,14 @@ thumbnails_format = PNG
 travel_lift_before_obstacle = 0
 travel_max_lift = 0.4
 travel_ramping_lift = 1
-travel_slope = 0
+travel_slope = 1
 toolchange_gcode = 
 use_firmware_retraction = 0
 use_relative_e_distances = 1
 use_volumetric_e = 0
 variable_layer_height = 1
 wipe = 1
+wipe_distance = 2
 z_offset = 0
 
 # X-MAX 3 preset
@@ -1986,7 +1988,7 @@ auxiliary_fan = 1
 bed_shape = 0x0,325x0,325x325,0x325
 chamber_temperature = 1
 max_print_height = 315
-thumbnails = 380x380/PNG, 210x210/PNG
+thumbnails = 380x380/QIDI, 210x210/QIDI, 110X110/PNG
 
 [printer:X-MAX 3 0.2 nozzle]
 inherits = *X-MAX 3*
@@ -2032,7 +2034,7 @@ auxiliary_fan = 1
 bed_shape = 0x0,280x0,280x280,0x280
 chamber_temperature = 1
 max_print_height = 270
-thumbnails = 380x380/PNG, 210x210/PNG
+thumbnails = 380x380/QIDI, 210x210/QIDI, 110X110/PNG
 
 [printer:X-Plus 3 0.2 nozzle]
 inherits = *X-Plus 3*
@@ -2076,7 +2078,7 @@ inherits = *common*
 printer_model = X-smart 3
 bed_shape = 0x0,175x0,175x180,0x180
 max_print_height = 170
-thumbnails = 205x205/PNG, 140x140/PNG
+thumbnails = 205x205/QIDI, 140x140/QIDI, 110X110/PNG
 
 [printer:X-smart 3 0.2 nozzle]
 inherits = *X-smart 3*