QIDISlicer1.0.0

resources/profiles/QIDITechnology.idx

@@ -0,0 +1,3 @@
+min_slic3r_version = 1.0.0
+1.0.1 Initial
+1.0.0 Initial

resources/profiles/QIDITechnology.ini

@@ -0,0 +1,757 @@
+# Print profiles for QIDI Technology printers.
+
+[vendor]
+# Vendor name will be shown by the Config Wizard.
+name = QIDI Technology
+# Configuration version of this file. Config file will only be installed, if the config_version differs.
+# This means, the server may force the PrusaSlicer configuration to be downgraded.
+config_version = 1.0.0
+# Where to get the updates from?
+config_update_url = https://github.com/QIDITECH/QIDISlicer/releases/download/QIDITechnology/
+changelog_url = https://qidi3d.com/pages/software-firmware
+
+# The printer models will be shown by the Configuration Wizard in this order,
+# also the first model installed & the first nozzle installed will be activated after install.
+# Printer model name will be shown by the installation wizard.
+
+[printer_model:X-MAX 3]
+name = X-MAX 3
+variants = 0.4
+technology = FFF
+family = X
+bed_model = X-MAX 3_bed.stl
+bed_texture = X-MAX 3.svg
+default_materials = QIDI ABS Rapido @X-MAX 3; QIDI PLA Rapido @X-MAX 3; QIDI PLA Rapido Matte @X-MAX 3; QIDI ToughPETG @X-MAX 3; Generic ABS @X-MAX 3; Generic PETG @X-MAX 3; Generic PLA @X-MAX 3
+email = MAX3support@qd3Dprinter.com; MAX3AMS@qd3Dprinter.com
+skype = MAX3support@qd3Dprinter.com
+
+[printer_model:X-Plus 3]
+name = X-Plus 3
+variants = 0.4
+technology = FFF
+family = X
+bed_model = X-Plus 3_bed.stl
+bed_texture = X-Plus 3.svg
+default_materials = QIDI ABS Rapido @X-Plus 3; QIDI PLA Rapido @X-Plus 3; QIDI PLA Rapido Matte @X-Plus 3; QIDI ToughPETG @X-Plus 3; Generic ABS @X-Plus 3; Generic PETG @X-Plus 3; Generic PLA @X-Plus 3
+email = Plus3support@qd3Dprinter.com; Plus3AMS@qd3Dprinter.com
+skype = Plus3support@qd3Dprinter.com
+
+[printer_model:X-smart 3]
+name = X-smart 3
+variants = 0.4
+technology = FFF
+family = X
+bed_model = X-smart 3_bed.stl
+bed_texture = X-smart 3.svg
+default_materials = QIDI ABS Rapido @X-smart 3; QIDI PLA Rapido @X-smart 3; QIDI PLA Rapido Matte @X-smart 3; QIDI ToughPETG @X-smart 3; Generic ABS @X-smart 3; Generic PETG @X-smart 3; Generic PLA @X-smart 3
+email = Smart3support@qd3dprinter.com; Smart3AMS@qd3dprinter.com
+skype = Smart3AMS@qd3dprinter.com
+
+# All presets starting with asterisk, for example *common*, are intermediate and they will
+# not make it into the user interface.
+
+# Common print presets
+[print:*common*]
+avoid_crossing_curled_overhangs = 0
+avoid_crossing_perimeters = 0
+avoid_crossing_perimeters_max_detour = 0
+bottom_fill_pattern = monotonic
+bottom_solid_layers = 3
+bottom_solid_min_thickness = 0
+bridge_acceleration = 2000
+bridge_angle = 0
+bridge_flow_ratio = 1
+bridge_speed = 50
+brim_separation = 0.1
+brim_type = outer_only
+brim_width = 0
+compatible_printers = 
+compatible_printers_condition = 
+complete_objects = 0
+default_acceleration = 10000
+dont_support_bridges = 0
+draft_shield = disabled
+elefant_foot_compensation = 0.15
+enable_dynamic_overhang_speeds = 1
+external_perimeter_acceleration = 3000
+external_perimeter_extrusion_width = 0
+external_perimeter_speed = 200
+external_perimeters_first = 0
+extra_perimeters = 1
+extra_perimeters_on_overhangs = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.42
+fill_angle = 45
+fill_density = 15%
+fill_pattern = grid
+first_layer_acceleration = 500
+first_layer_acceleration_over_raft = 500
+first_layer_extrusion_width = 0.5
+first_layer_height = 0.2
+first_layer_speed = 25%
+first_layer_speed_over_raft = 30
+fuzzy_skin = none
+fuzzy_skin_point_dist = 0.8
+fuzzy_skin_thickness = 0.3
+gap_fill_enabled = 0
+gap_fill_speed = 250
+gcode_comments = 0
+gcode_label_objects = 0
+gcode_resolution = 0.0125
+gcode_substitutions = 
+infill_acceleration = 0
+infill_anchor = 600%
+infill_anchor_max = 50
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.45
+infill_first = 0
+infill_overlap = 15%
+infill_speed = 270
+inherits = 
+interface_shells = 0
+ironing = 0
+ironing_flowrate = 15%
+ironing_spacing = 0.1
+ironing_speed = 30
+ironing_type = top
+layer_height = 0.2
+max_print_speed = 600
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 0
+min_bead_width = 85%
+min_feature_size = 25%
+min_skirt_length = 5
+mmu_segmented_region_max_width = 0
+notes = 
+only_retract_when_crossing_perimeters = 1
+ooze_prevention = 0
+output_filename_format = [input_filename_base].gcode
+overhang_speed_0 = 20
+overhang_speed_1 = 30
+overhang_speed_2 = 50
+overhang_speed_3 = 0
+overhangs = 1
+perimeter_acceleration = 5000
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.45
+perimeter_generator = arachne
+perimeter_speed = 300
+perimeters = 2
+post_process = 
+print_settings_id = 
+raft_contact_distance = 0.1
+raft_expansion = 1.5
+raft_first_layer_density = 90%
+raft_first_layer_expansion = 3
+raft_layers = 0
+resolution = 0
+seam_position = aligned
+single_extruder_multi_material_priming = 1
+skirt_distance = 6
+skirt_height = 1
+skirts = 0
+slice_closing_radius = 0.049
+slicing_mode = regular
+small_perimeter_speed = 50
+solid_infill_acceleration = 0
+solid_infill_below_area = 10
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0
+solid_infill_speed = 220
+spiral_vase = 0
+staggered_inner_seams = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_auto = 1
+support_material_bottom_contact_distance = 0
+support_material_bottom_interface_layers = -1
+support_material_buildplate_only = 0
+support_material_closing_radius = 2
+support_material_contact_distance = 0.2
+support_material_enforce_layers = 0
+support_material_extruder = 1
+support_material_extrusion_width = 0
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 1
+support_material_interface_layers = 2
+support_material_interface_pattern = rectilinear
+support_material_interface_spacing = 0.5
+support_material_interface_speed = 80
+support_material_pattern = rectilinear
+support_material_spacing = 2.5
+support_material_speed = 150
+support_material_style = grid
+support_material_synchronize_layers = 0
+support_material_threshold = 30
+support_material_with_sheath = 0
+support_material_xy_spacing = 0.35
+support_tree_angle = 40
+support_tree_angle_slow = 25
+support_tree_branch_diameter = 2
+support_tree_branch_diameter_angle = 5
+support_tree_branch_diameter_double_wall = 3
+support_tree_branch_distance = 1
+support_tree_tip_diameter = 0.8
+support_tree_top_rate = 15%
+thick_bridges = 1
+thin_walls = 1
+threads = 12
+top_fill_pattern = monotoniclines
+top_infill_extrusion_width = 0
+top_solid_infill_acceleration = 2000
+top_solid_infill_speed = 200
+top_solid_layers = 4
+top_solid_min_thickness = 0
+travel_acceleration = 0
+travel_speed = 500
+travel_speed_z = 10
+wall_distribution_count = 1
+wall_transition_angle = 10
+wall_transition_filter_deviation = 25%
+wall_transition_length = 100%
+wipe_tower = 0
+wipe_tower_bridging = 10
+wipe_tower_brim_width = 2
+wipe_tower_cone_angle = 0
+wipe_tower_extra_spacing = 100%
+wipe_tower_extruder = 0
+wipe_tower_no_sparse_layers = 0
+wipe_tower_rotation_angle = 0
+wipe_tower_width = 40
+wipe_tower_x = 180
+wipe_tower_y = 140
+xy_size_compensation = 0
+
+# Print preset
+[print:0.12mm Extra High]
+inherits = *common*
+bottom_solid_layers = 5
+gap_fill_speed = 350
+infill_speed = 430
+layer_height = 0.12
+overhang_speed_0 = 20
+overhang_speed_1 = 20
+overhang_speed_2 = 30
+overhang_speed_3 = 60
+perimeter_speed = 350
+solid_infill_speed = 320
+top_solid_layers = 6
+
+[print:0.16mm High]
+inherits = *common*
+bottom_solid_layers = 4
+gap_fill_speed = 300
+infill_speed = 330
+layer_height = 0.16
+overhang_speed_0 = 20
+overhang_speed_1 = 20
+overhang_speed_2 = 30
+overhang_speed_3 = 60
+solid_infill_speed = 270
+top_solid_layers = 5
+
+[print:0.20mm Fine]
+inherits = *common*
+
+[print:0.25mm Quick]
+inherits = *common*
+gap_fill_speed = 230
+infill_speed = 220
+layer_height = 0.25
+perimeter_speed = 230
+solid_infill_speed = 230
+
+# Common filament preset
+[filament:*common*]
+bed_temperature = 60
+bridge_fan_speed = 100
+compatible_printers = 
+compatible_printers_condition = 
+compatible_prints = 
+compatible_prints_condition = 
+cooling = 1
+disable_fan_first_layers = 1
+enable_dynamic_fan_speeds = 0
+enable_auxiliary_fan = 100
+end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\nM106 P3 S0"
+extrusion_multiplier = 0.98
+fan_always_on = 1
+fan_below_layer_time = 60
+filament_colour = #3399FF
+filament_cooling_final_speed = 3.4
+filament_cooling_initial_speed = 2.2
+filament_cooling_moves = 4
+filament_cost = 0
+filament_density = 1.24
+filament_deretract_speed = nil
+filament_diameter = 1.75
+filament_load_time = 0
+filament_loading_speed = 28
+filament_loading_speed_start = 3
+filament_max_volumetric_speed = 21
+filament_minimal_purge_on_wipe_tower = 15
+filament_notes = ""
+filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+filament_retract_before_travel = nil
+filament_retract_before_wipe = nil
+filament_retract_layer_change = nil
+filament_retract_length = nil
+filament_retract_lift = nil
+filament_retract_lift_above = nil
+filament_retract_lift_below = nil
+filament_retract_restart_extra = nil
+filament_retract_speed = nil
+filament_settings_id = PrusaSlicer_cf_pro.ini
+filament_soluble = 0
+filament_spool_weight = 0
+filament_toolchange_delay = 0
+filament_type = PLA
+filament_unload_time = 0
+filament_unloading_speed = 90
+filament_unloading_speed_start = 100
+filament_vendor = QIDI
+filament_wipe = nil
+first_layer_bed_temperature = 60
+first_layer_temperature = 220
+first_layer_volume_temperature = 0
+full_fan_speed_layer = 0
+idle_temperature = 100
+inherits = 
+max_fan_speed = 100
+min_fan_speed = 100
+min_print_speed = 20
+overhang_fan_speed_0 = 0
+overhang_fan_speed_1 = 0
+overhang_fan_speed_2 = 0
+overhang_fan_speed_3 = 0
+slowdown_below_layer_time = 5
+start_filament_gcode = "; Filament gcode\nM106 P3 S255"
+temperature = 220
+volume_temperature = 0
+
+# QIDI filament preset
+[filament:*QIDI ABS Rapido*]
+inherits = *common*
+bed_temperature = 100
+enable_auxiliary_fan = 0
+extrusion_multiplier = 0.95
+filament_colour = #FFC800
+filament_density = 1.02
+filament_max_volumetric_speed = 22
+filament_type = ABS
+first_layer_bed_temperature = 100
+first_layer_temperature = 270
+max_fan_speed = 60
+min_fan_speed = 60
+start_filament_gcode = "; Filament gcode\nM106 P3 S0"
+temperature = 270
+volume_temperature = 55
+
+[filament:*QIDI ABS-GF*]
+inherits = *common*
+bed_temperature = 100
+enable_auxiliary_fan = 0
+extrusion_multiplier = 0.95
+filament_colour = #282828
+filament_density = 1.15
+filament_max_volumetric_speed = 16
+filament_type = ABS-GF
+first_layer_bed_temperature = 100
+first_layer_temperature = 270
+max_fan_speed = 20
+min_fan_speed = 20
+start_filament_gcode = "; Filament gcode\nM106 P3 S0"
+temperature = 270
+volume_temperature = 55
+
+[filament:*QIDI PA12-CF*]
+inherits = *common*
+bed_temperature = 80
+enable_auxiliary_fan = 0
+extrusion_multiplier = 0.96
+filament_colour = #696969
+filament_density = 1.09
+filament_max_volumetric_speed = 16
+filament_type = PA12-CF
+first_layer_bed_temperature = 80
+first_layer_temperature = 290
+max_fan_speed = 15
+min_fan_speed = 15
+temperature = 290
+
+[filament:*QIDI PAHT-CF*]
+inherits = *common*
+bed_temperature = 80
+enable_auxiliary_fan = 0
+extrusion_multiplier = 0.96
+filament_colour = #4F4F4F
+filament_density = 1.20
+filament_max_volumetric_speed = 16
+filament_type = PAHT-CF
+first_layer_bed_temperature = 80
+first_layer_temperature = 310
+max_fan_speed = 15
+min_fan_speed = 15
+temperature = 310
+
+[filament:*QIDI PET-CF*]
+inherits = *common*
+bed_temperature = 80
+enable_auxiliary_fan = 0
+extrusion_multiplier = 1
+filament_colour = #323232
+filament_density = 1.30
+filament_max_volumetric_speed = 16
+filament_type = PET-CF
+first_layer_bed_temperature = 80
+first_layer_temperature = 320
+max_fan_speed = 10
+min_fan_speed = 10
+temperature = 320
+
+[filament:*QIDI PETG-Tough*]
+inherits = *common*
+bed_temperature = 80
+enable_auxiliary_fan = 0
+extrusion_multiplier = 0.95
+filament_colour = #00FF40
+filament_density = 1.24
+filament_max_volumetric_speed = 15
+filament_type = PETG
+first_layer_bed_temperature = 80
+first_layer_temperature = 250
+max_fan_speed = 60
+min_fan_speed = 60
+temperature = 250
+
+[filament:*QIDI PLA Rapido*]
+inherits = *common*
+
+[filament:*QIDI PLA Rapido Matte*]
+inherits = *common*
+filament_colour = #0073E6
+filament_density = 1.42
+filament_max_volumetric_speed = 22
+
+[filament:*QIDI UltraPA*]
+inherits = *common*
+bed_temperature = 80
+enable_auxiliary_fan = 0
+extrusion_multiplier = 0.96
+filament_colour = #FFEBCD
+filament_density = 1.21
+filament_max_volumetric_speed = 6.5
+filament_type = UltraPA
+first_layer_bed_temperature = 80
+first_layer_temperature = 280
+max_fan_speed = 20
+min_fan_speed = 20
+temperature = 280
+
+# Generic filament preset
+[filament:*Generic ABS*]
+inherits = *common*
+bed_temperature = 100
+enable_auxiliary_fan = 0
+extrusion_multiplier = 0.95
+filament_colour = #FFFF00
+filament_density = 1.04
+filament_max_volumetric_speed = 16
+filament_type = ABS
+filament_vendor = Generic
+first_layer_bed_temperature = 100
+first_layer_temperature = 260
+max_fan_speed = 60
+min_fan_speed = 60
+start_filament_gcode = "; Filament gcode\nM106 P3 S0"
+temperature = 260
+
+[filament:*Generic PETG*]
+inherits = *common*
+bed_temperature = 80
+enable_auxiliary_fan = 0
+extrusion_multiplier = 0.95
+filament_colour = #00FF00
+filament_density = 1.27
+filament_max_volumetric_speed = 10
+filament_type = PETG
+filament_vendor = Generic
+first_layer_bed_temperature = 80
+first_layer_temperature = 250
+max_fan_speed = 60
+min_fan_speed = 60
+temperature = 250
+
+[filament:*Generic PLA*]
+inherits = *common*
+filament_colour = #0000FF
+filament_density = 1.20
+filament_max_volumetric_speed = 12
+filament_vendor = Generic
+
+[filament:*Generic TPU 95A*]
+inherits = *common*
+extrusion_multiplier = 1
+filament_colour = #8000FF
+filament_density = 1.21
+filament_max_volumetric_speed = 3.2
+filament_type = TPU 95A
+filament_vendor = Generic
+first_layer_temperature = 230
+temperature = 230
+
+# X-MAX 3 QIDI filament preset
+[filament:QIDI ABS Rapido @X-MAX 3]
+inherits = *QIDI ABS Rapido*
+compatible_printers_condition = printer_model=="X-MAX 3"
+
+[filament:QIDI ABS-GF @X-MAX 3]
+inherits = *QIDI ABS-GF*
+compatible_printers_condition = printer_model=="X-MAX 3"
+
+[filament:QIDI PA12-CF @X-MAX 3]
+inherits = *QIDI PA12-CF*
+compatible_printers_condition = printer_model=="X-MAX 3"
+
+[filament:QIDI PAHT-CF @X-Plus3]
+inherits = *QIDI PAHT-CF*
+compatible_printers_condition = printer_model=="X-MAX 3"
+
+[filament:QIDI PET-CF @X-MAX 3]
+inherits = *QIDI PET-CF*
+compatible_printers_condition = printer_model=="X-MAX 3"
+
+[filament:QIDI PETG-Tough @X-MAX 3]
+inherits = *QIDI PETG-Tough*
+compatible_printers_condition = printer_model=="X-MAX 3"
+
+[filament:QIDI PLA Rapido @X-MAX 3]
+inherits = *QIDI PLA Rapido*
+compatible_printers_condition = printer_model=="X-MAX 3"
+
+[filament:QIDI PLA Rapido Matte @X-MAX 3]
+inherits = *QIDI PLA Rapido Matte*
+compatible_printers_condition = printer_model=="X-MAX 3"
+
+[filament:QIDI UltraPA @X-MAX 3]
+inherits = *QIDI UltraPA*
+compatible_printers_condition = printer_model=="X-MAX 3"
+
+# X-MAX 3 Generic filament preset
+[filament:Generic ABS @X-MAX 3]
+inherits = *Generic ABS*
+compatible_printers_condition = printer_model=="X-MAX 3"
+
+[filament:Generic PETG @X-MAX 3]
+inherits = *Generic PETG*
+compatible_printers_condition = printer_model=="X-MAX 3"
+
+[filament:Generic PLA @X-MAX 3]
+inherits = *Generic PLA*
+compatible_printers_condition = printer_model=="X-MAX 3"
+
+[filament:Generic TPU 95A @X-MAX 3]
+inherits = *Generic TPU 95A*
+compatible_printers_condition = printer_model=="X-MAX 3"
+
+# X-Plus 3 QIDI filament preset
+[filament:QIDI ABS Rapido @X-Plus 3]
+inherits = *QIDI ABS Rapido*
+compatible_printers_condition = printer_model=="X-Plus 3"
+
+[filament:QIDI ABS-GF @X-Plus 3]
+inherits = *QIDI ABS-GF*
+compatible_printers_condition = printer_model=="X-Plus 3"
+
+[filament:QIDI PA12-CF @X-Plus 3]
+inherits = *QIDI PA12-CF*
+compatible_printers_condition = printer_model=="X-Plus 3"
+
+[filament:QIDI PAHT-CF @X-Plus 3]
+inherits = *QIDI PAHT-CF*
+compatible_printers_condition = printer_model=="X-Plus 3"
+
+[filament:QIDI PET-CF @X-Plus 3]
+inherits = *QIDI PET-CF*
+compatible_printers_condition = printer_model=="X-Plus 3"
+
+[filament:QIDI PETG-Tough @X-Plus 3]
+inherits = *QIDI PETG-Tough*
+compatible_printers_condition = printer_model=="X-Plus 3"
+
+[filament:QIDI PLA Rapido @X-Plus 3]
+inherits = *QIDI PLA Rapido*
+compatible_printers_condition = printer_model=="X-Plus 3"
+
+[filament:QIDI PLA Rapido Matte @X-Plus 3]
+inherits = *QIDI PLA Rapido Matte*
+compatible_printers_condition = printer_model=="X-Plus 3"
+
+[filament:QIDI UltraPA @X-Plus 3]
+inherits = *QIDI UltraPA*
+compatible_printers_condition = printer_model=="X-Plus 3"
+
+# X-Plus 3 Generic filament preset
+[filament:Generic ABS @X-Plus 3]
+inherits = *Generic ABS*
+compatible_printers_condition = printer_model=="X-Plus 3"
+
+[filament:Generic PETG @X-Plus 3]
+inherits = *Generic PETG*
+compatible_printers_condition = printer_model=="X-Plus 3"
+
+[filament:Generic PLA @X-Plus 3]
+inherits = *Generic PLA*
+compatible_printers_condition = printer_model=="X-Plus 3"
+
+[filament:Generic TPU 95A @X-Plus 3]
+inherits = *Generic TPU 95A*
+compatible_printers_condition = printer_model=="X-Plus 3"
+
+# X-smart 3 QIDI filament preset
+[filament:QIDI ABS Rapido @X-smart 3]
+inherits = *QIDI ABS Rapido*
+compatible_printers_condition = printer_model=="X-smart 3"
+
+[filament:QIDI PETG-Tough @X-smart 3]
+inherits = *QIDI PETG-Tough*
+compatible_printers_condition = printer_model=="X-smart 3"
+
+[filament:QIDI PLA Rapido @X-smart 3]
+inherits = *QIDI PLA Rapido*
+compatible_printers_condition = printer_model=="X-smart 3"
+
+[filament:QIDI PLA Rapido Matte @X-smart 3]
+inherits = *QIDI PLA Rapido Matte*
+compatible_printers_condition = printer_model=="X-smart 3"
+
+# X-smart 3 Generic filament preset
+[filament:Generic ABS @X-smart 3]
+inherits = *Generic ABS*
+compatible_printers_condition = printer_model=="X-smart 3"
+
+[filament:Generic PETG @X-smart 3]
+inherits = *Generic PETG*
+compatible_printers_condition = printer_model=="X-smart 3"
+
+[filament:Generic PLA @X-smart 3]
+inherits = *Generic PLA*
+compatible_printers_condition = printer_model=="X-smart 3"
+
+[filament:Generic TPU 95A @X-smart 3]
+inherits = *Generic TPU 95A*
+compatible_printers_condition = printer_model=="X-smart 3"
+
+# Common printer preset
+[printer:*common*]
+autoemit_temperature_commands = 1
+bed_custom_model = 
+bed_custom_texture = 
+bed_shape = 0x0,325x0,325x325,0x325
+before_layer_gcode = G92 E0
+between_objects_gcode = 
+color_change_gcode = M600
+cooling_tube_length = 5
+cooling_tube_retraction = 91.5
+default_filament_profile = 
+default_print_profile = 0.20mm Fine
+deretract_speed = 0
+end_gcode = M141 S0\nM104 S0\nM140 S0\nG1 E-3 F1800\nG91\nG0 Z5 F600\nG90\nG0 X0 Y0 F12000\n{if max_layer_z < max_print_height / 2}G1 Z{max_print_height / 2 + 10} F600{else}G1 Z{min(max_print_height, max_layer_z + 10)}{endif}
+extra_loading_move = -2
+extruder_colour = ""
+extruder_offset = 0x0
+gcode_flavor = klipper
+high_current_on_filament_swap = 0
+host_type = mainsail
+inherits = 
+layer_gcode = 
+machine_limits_usage = time_estimate_only
+machine_max_acceleration_e = 5000
+machine_max_acceleration_extruding = 20000
+machine_max_acceleration_retracting = 5000
+machine_max_acceleration_travel = 1500
+machine_max_acceleration_x = 20000
+machine_max_acceleration_y = 20000
+machine_max_acceleration_z = 500
+machine_max_feedrate_e = 30
+machine_max_feedrate_x = 600
+machine_max_feedrate_y = 600
+machine_max_feedrate_z = 10
+machine_max_jerk_e = 2
+machine_max_jerk_x = 9
+machine_max_jerk_y = 9
+machine_max_jerk_z = 3
+machine_min_extruding_rate = 0
+machine_min_travel_rate = 0
+max_layer_height = 0
+max_print_height = 315
+min_layer_height = 0.08
+nozzle_diameter = 0.4
+parking_pos_retraction = 92
+pause_print_gcode = M0
+print_host = 
+printer_model = 
+printer_notes = 
+printer_settings_id = 
+printer_technology = FFF
+printer_variant = 0.4
+printer_vendor = 
+printhost_apikey = 
+printhost_cafile = 
+remaining_times = 1
+retract_before_travel = 1
+retract_before_wipe = 0%
+retract_layer_change = 1
+retract_length = 1
+retract_length_toolchange = 10
+retract_lift = 0.4
+retract_lift_above = 0
+retract_lift_below = 0
+retract_restart_extra = 0
+retract_restart_extra_toolchange = 0
+retract_speed = 30
+silent_mode = 0
+single_extruder_multi_material = 0
+start_gcode = G28\nM141 S0\nG0 Z50 F600\nM190 S[first_layer_bed_temperature]\nG28 Z\nG29\nG0 X0 Y0 Z50 F6000\nM109 S[first_layer_temperature]\nM83\nG0 X{max((min(print_bed_max[0], first_layer_print_min[0] + 80) - 85),0)} Y{max((min(print_bed_max[1], first_layer_print_min[1] + 80) - 85),0)} Z5 F6000\nG0 Z0.2 F600\nG1 E3 F1800\nG1 X{(min(print_bed_max[0], first_layer_print_min[0] + 80))} E{85 * 0.04} F3000\nG1 Y{max((min(print_bed_max[1], first_layer_print_min[1] + 80) - 85),0) + 2} E{2 * 0.04} F3000\nG1 X{max((min(print_bed_max[0], first_layer_print_min[0] + 80) - 85),0)} E{85 * 0.04} F3000\nG1 Y{max((min(print_bed_max[1], first_layer_print_min[1] + 80) - 85),0) + 85} E{83 * 0.04} F3000\nG1 X{max((min(print_bed_max[0], first_layer_print_min[0] + 80) - 85),0) + 2} E{2 * 0.04} F3000\nG1 Y{max((min(print_bed_max[1], first_layer_print_min[1] + 80) - 85),0) + 5} E{80 * 0.04} F3000
+template_custom_gcode = 
+thumbnails = 
+thumbnails_format = QIDI
+toolchange_gcode = 
+use_firmware_retraction = 0
+use_relative_e_distances = 1
+use_volumetric_e = 0
+variable_layer_height = 1
+wipe = 1
+z_offset = 0
+
+# X-MAX 3 preset
+[printer:X-MAX 3]
+inherits = *common*
+printer_model = X-MAX 3
+bed_shape = 0x0,325x0,325x325,0x325
+default_filament_profile = QIDI PLA Rapido @X-MAX 3
+max_print_height = 315
+thumbnails = 380x380,210x210
+
+# X-Plus 3 preset
+[printer:X-Plus 3]
+inherits = *common*
+printer_model = X-Plus 3
+bed_shape = 0x0,280x0,280x280,0x280
+default_filament_profile = QIDI PLA Rapido @X-Plus 3
+max_print_height = 270
+thumbnails = 380x380,210x210
+
+# X-smart 3 preset
+[printer:X-smart 3]
+inherits = *common*
+printer_model = X-smart 3
+bed_shape = 0x0,175x0,175x180,0x180
+default_filament_profile = QIDI PLA Rapido @X-smart 3
+max_print_height = 170
+thumbnails = 205x205,140x140

resources/profiles/QIDITechnology/X-MAX 3.svg

@@ -0,0 +1,73 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Generator: Adobe Illustrator 25.0.0, SVG Export Plug-In . SVG Version: 6.00 Build 0)  -->
+<svg version="1.1" id="图层_1" xmlns="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3.org/1999/xlink" x="0px" y="0px"
+	 viewBox="0 0 921.3 921.3" style="enable-background:new 0 0 921.3 921.3;" xml:space="preserve">
+<rect y="899.8" style="fill:#FFFFFF;" width="921.3" height="0.4"/>
+<rect y="871.5" style="fill:#FFFFFF;" width="921.3" height="0.4"/>
+<rect y="843.1" style="fill:#FFFFFF;" width="921.3" height="0.4"/>
+<rect y="814.3" style="fill:#FFFFFF;" width="921.3" height="1.4"/>
+<rect y="919.9" style="fill:#FFFFFF;" width="921.3" height="1.4"/>
+<rect y="786.4" style="fill:#FFFFFF;" width="921.3" height="0.4"/>
+<rect y="758.1" style="fill:#FFFFFF;" width="921.3" height="0.4"/>
+<rect y="729.7" style="fill:#FFFFFF;" width="921.3" height="0.4"/>
+<rect y="701.4" style="fill:#FFFFFF;" width="921.3" height="0.4"/>
+<rect y="672.5" style="fill:#FFFFFF;" width="921.3" height="1.4"/>
+<rect y="644.7" style="fill:#FFFFFF;" width="921.3" height="0.4"/>
+<rect y="616.3" style="fill:#FFFFFF;" width="921.3" height="0.4"/>
+<rect y="588" style="fill:#FFFFFF;" width="921.3" height="0.4"/>
+<rect y="559.6" style="fill:#FFFFFF;" width="921.3" height="0.4"/>
+<rect y="530.8" style="fill:#FFFFFF;" width="921.3" height="1.4"/>
+<rect y="502.9" style="fill:#FFFFFF;" width="921.3" height="0.4"/>
+<rect y="474.6" style="fill:#FFFFFF;" width="921.3" height="0.4"/>
+<rect y="446.3" style="fill:#FFFFFF;" width="921.3" height="0.4"/>
+<rect y="417.9" style="fill:#FFFFFF;" width="921.3" height="0.4"/>
+<rect y="389.1" style="fill:#FFFFFF;" width="921.3" height="1.4"/>
+<rect y="361.2" style="fill:#FFFFFF;" width="921.3" height="0.4"/>
+<rect y="332.9" style="fill:#FFFFFF;" width="921.3" height="0.4"/>
+<rect y="304.5" style="fill:#FFFFFF;" width="921.3" height="0.4"/>
+<rect y="276.2" style="fill:#FFFFFF;" width="921.3" height="0.4"/>
+<rect y="247.3" style="fill:#FFFFFF;" width="921.3" height="1.4"/>
+<rect y="219.5" style="fill:#FFFFFF;" width="921.3" height="0.4"/>
+<rect y="191.1" style="fill:#FFFFFF;" width="921.3" height="0.4"/>
+<rect y="162.8" style="fill:#FFFFFF;" width="921.3" height="0.4"/>
+<rect y="134.4" style="fill:#FFFFFF;" width="921.3" height="0.4"/>
+<rect y="105.6" style="fill:#FFFFFF;" width="921.3" height="1.4"/>
+<rect y="0" style="fill:#FFFFFF;" width="921.3" height="1.4"/>
+<rect y="77.8" style="fill:#FFFFFF;" width="921.3" height="0.4"/>
+<rect y="49.4" style="fill:#FFFFFF;" width="921.3" height="0.4"/>
+<rect y="21.1" style="fill:#FFFFFF;" width="921.3" height="0.4"/>
+<rect x="21.1" y="0" style="fill:#FFFFFF;" width="0.4" height="921.3"/>
+<rect x="49.4" y="0" style="fill:#FFFFFF;" width="0.4" height="921.3"/>
+<rect x="77.8" y="0" style="fill:#FFFFFF;" width="0.4" height="921.3"/>
+<rect x="105.6" y="0" style="fill:#FFFFFF;" width="1.4" height="921.3"/>
+<rect y="0" style="fill:#FFFFFF;" width="1.4" height="921.3"/>
+<rect x="134.4" y="0" style="fill:#FFFFFF;" width="0.4" height="921.3"/>
+<rect x="162.8" y="0" style="fill:#FFFFFF;" width="0.4" height="921.3"/>
+<rect x="191.1" y="0" style="fill:#FFFFFF;" width="0.4" height="921.3"/>
+<rect x="219.5" y="0" style="fill:#FFFFFF;" width="0.4" height="921.3"/>
+<rect x="247.3" y="0" style="fill:#FFFFFF;" width="1.4" height="921.3"/>
+<rect x="276.2" y="0" style="fill:#FFFFFF;" width="0.4" height="921.3"/>
+<rect x="304.5" y="0" style="fill:#FFFFFF;" width="0.4" height="921.3"/>
+<rect x="332.9" y="0" style="fill:#FFFFFF;" width="0.4" height="921.3"/>
+<rect x="361.2" y="0" style="fill:#FFFFFF;" width="0.4" height="921.3"/>
+<rect x="389.1" y="0" style="fill:#FFFFFF;" width="1.4" height="921.3"/>
+<rect x="417.9" y="0" style="fill:#FFFFFF;" width="0.4" height="921.3"/>
+<rect x="446.3" y="0" style="fill:#FFFFFF;" width="0.4" height="921.3"/>
+<rect x="474.6" y="0" style="fill:#FFFFFF;" width="0.4" height="921.3"/>
+<rect x="502.9" y="0" style="fill:#FFFFFF;" width="0.4" height="921.3"/>
+<rect x="530.8" y="0" style="fill:#FFFFFF;" width="1.4" height="921.3"/>
+<rect x="559.6" y="0" style="fill:#FFFFFF;" width="0.4" height="921.3"/>
+<rect x="588" y="0" style="fill:#FFFFFF;" width="0.4" height="921.3"/>
+<rect x="616.3" y="0" style="fill:#FFFFFF;" width="0.4" height="921.3"/>
+<rect x="644.7" y="0" style="fill:#FFFFFF;" width="0.4" height="921.3"/>
+<rect x="672.5" y="0" style="fill:#FFFFFF;" width="1.4" height="921.3"/>
+<rect x="701.4" y="0" style="fill:#FFFFFF;" width="0.4" height="921.3"/>
+<rect x="729.7" y="0" style="fill:#FFFFFF;" width="0.4" height="921.3"/>
+<rect x="758.1" y="0" style="fill:#FFFFFF;" width="0.4" height="921.3"/>
+<rect x="786.4" y="0" style="fill:#FFFFFF;" width="0.4" height="921.3"/>
+<rect x="814.3" y="0" style="fill:#FFFFFF;" width="1.4" height="921.3"/>
+<rect x="919.9" y="0" style="fill:#FFFFFF;" width="1.4" height="921.3"/>
+<rect x="843.1" y="0" style="fill:#FFFFFF;" width="0.4" height="921.3"/>
+<rect x="871.5" y="0" style="fill:#FFFFFF;" width="0.4" height="921.3"/>
+<rect x="899.8" y="0" style="fill:#FFFFFF;" width="0.4" height="921.3"/>
+</svg>

resources/profiles/QIDITechnology/X-Plus 3.svg

@@ -0,0 +1,65 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Generator: Adobe Illustrator 25.0.0, SVG Export Plug-In . SVG Version: 6.00 Build 0)  -->
+<svg version="1.1" id="图层_1" xmlns="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3.org/1999/xlink" x="0px" y="0px"
+	 viewBox="0 0 793.7 793.7" style="enable-background:new 0 0 793.7 793.7;" xml:space="preserve">
+<rect y="14" style="fill:#FFFFFF;" width="793.7" height="0.4"/>
+<rect x="14" y="0" style="fill:#FFFFFF;" width="0.4" height="793.7"/>
+<rect x="41.8" y="0" style="fill:#FFFFFF;" width="1.4" height="793.7"/>
+<rect x="70.7" y="0" style="fill:#FFFFFF;" width="0.4" height="793.7"/>
+<rect x="99" y="0" style="fill:#FFFFFF;" width="0.4" height="793.7"/>
+<rect x="127.4" y="0" style="fill:#FFFFFF;" width="0.4" height="793.7"/>
+<rect x="155.7" y="0" style="fill:#FFFFFF;" width="0.4" height="793.7"/>
+<rect x="183.6" y="0" style="fill:#FFFFFF;" width="1.4" height="793.7"/>
+<rect x="212.4" y="0" style="fill:#FFFFFF;" width="0.4" height="793.7"/>
+<rect x="240.7" y="0" style="fill:#FFFFFF;" width="0.4" height="793.7"/>
+<rect x="269.1" y="0" style="fill:#FFFFFF;" width="0.4" height="793.7"/>
+<rect x="297.4" y="0" style="fill:#FFFFFF;" width="0.4" height="793.7"/>
+<rect x="325.3" y="0" style="fill:#FFFFFF;" width="1.4" height="793.7"/>
+<rect x="354.1" y="0" style="fill:#FFFFFF;" width="0.4" height="793.7"/>
+<rect x="382.5" y="0" style="fill:#FFFFFF;" width="0.4" height="793.7"/>
+<rect x="410.8" y="0" style="fill:#FFFFFF;" width="0.4" height="793.7"/>
+<rect x="439.2" y="0" style="fill:#FFFFFF;" width="0.4" height="793.7"/>
+<rect x="467" y="0" style="fill:#FFFFFF;" width="1.4" height="793.7"/>
+<rect x="495.9" y="0" style="fill:#FFFFFF;" width="0.4" height="793.7"/>
+<rect x="524.2" y="0" style="fill:#FFFFFF;" width="0.4" height="793.7"/>
+<rect x="552.6" y="0" style="fill:#FFFFFF;" width="0.4" height="793.7"/>
+<rect x="580.9" y="0" style="fill:#FFFFFF;" width="0.4" height="793.7"/>
+<rect x="608.7" y="0" style="fill:#FFFFFF;" width="1.4" height="793.7"/>
+<rect x="637.6" y="0" style="fill:#FFFFFF;" width="0.4" height="793.7"/>
+<rect x="665.9" y="0" style="fill:#FFFFFF;" width="0.4" height="793.7"/>
+<rect x="694.3" y="0" style="fill:#FFFFFF;" width="0.4" height="793.7"/>
+<rect x="722.6" y="0" style="fill:#FFFFFF;" width="0.4" height="793.7"/>
+<rect x="750.5" y="0" style="fill:#FFFFFF;" width="1.4" height="793.7"/>
+<rect x="792.3" y="0" style="fill:#FFFFFF;" width="1.4" height="793.7"/>
+<rect y="0" style="fill:#FFFFFF;" width="1.4" height="793.7"/>
+<rect x="779.3" y="0" style="fill:#FFFFFF;" width="0.4" height="793.7"/>
+<rect y="41.8" style="fill:#FFFFFF;" width="793.7" height="1.4"/>
+<rect y="0" style="fill:#FFFFFF;" width="793.7" height="1.4"/>
+<rect y="792.3" style="fill:#FFFFFF;" width="793.7" height="1.4"/>
+<rect y="70.7" style="fill:#FFFFFF;" width="793.7" height="0.4"/>
+<rect y="99" style="fill:#FFFFFF;" width="793.7" height="0.4"/>
+<rect y="127.4" style="fill:#FFFFFF;" width="793.7" height="0.4"/>
+<rect y="155.7" style="fill:#FFFFFF;" width="793.7" height="0.4"/>
+<rect y="183.6" style="fill:#FFFFFF;" width="793.7" height="1.4"/>
+<rect y="212.4" style="fill:#FFFFFF;" width="793.7" height="0.4"/>
+<rect y="240.7" style="fill:#FFFFFF;" width="793.7" height="0.4"/>
+<rect y="269.1" style="fill:#FFFFFF;" width="793.7" height="0.4"/>
+<rect y="297.4" style="fill:#FFFFFF;" width="793.7" height="0.4"/>
+<rect y="325.3" style="fill:#FFFFFF;" width="793.7" height="1.4"/>
+<rect y="354.1" style="fill:#FFFFFF;" width="793.7" height="0.4"/>
+<rect y="382.5" style="fill:#FFFFFF;" width="793.7" height="0.4"/>
+<rect y="410.8" style="fill:#FFFFFF;" width="793.7" height="0.4"/>
+<rect y="439.2" style="fill:#FFFFFF;" width="793.7" height="0.4"/>
+<rect y="467" style="fill:#FFFFFF;" width="793.7" height="1.4"/>
+<rect y="495.9" style="fill:#FFFFFF;" width="793.7" height="0.4"/>
+<rect y="524.2" style="fill:#FFFFFF;" width="793.7" height="0.4"/>
+<rect y="552.6" style="fill:#FFFFFF;" width="793.7" height="0.4"/>
+<rect y="580.9" style="fill:#FFFFFF;" width="793.7" height="0.4"/>
+<rect y="608.7" style="fill:#FFFFFF;" width="793.7" height="1.4"/>
+<rect y="637.6" style="fill:#FFFFFF;" width="793.7" height="0.4"/>
+<rect y="665.9" style="fill:#FFFFFF;" width="793.7" height="0.4"/>
+<rect y="694.3" style="fill:#FFFFFF;" width="793.7" height="0.4"/>
+<rect y="722.6" style="fill:#FFFFFF;" width="793.7" height="0.4"/>
+<rect y="750.5" style="fill:#FFFFFF;" width="793.7" height="1.4"/>
+<rect y="779.3" style="fill:#FFFFFF;" width="793.7" height="0.4"/>
+</svg>

resources/profiles/QIDITechnology/X-smart 3.svg

@@ -0,0 +1,45 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Generator: Adobe Illustrator 25.0.0, SVG Export Plug-In . SVG Version: 6.00 Build 0)  -->
+<svg version="1.1" id="图层_1" xmlns="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3.org/1999/xlink" x="0px" y="0px"
+	 viewBox="0 0 496.1 510.2" style="enable-background:new 0 0 496.1 510.2;" xml:space="preserve">
+<rect x="0" y="14" style="fill:#FFFFFF;" width="496.1" height="0.4"/>
+<rect x="0" y="41.8" style="fill:#FFFFFF;" width="496.1" height="1.4"/>
+<rect x="0" style="fill:#FFFFFF;" width="496.1" height="1.4"/>
+<rect x="0" y="508.8" style="fill:#FFFFFF;" width="496.1" height="1.4"/>
+<rect x="0" y="70.7" style="fill:#FFFFFF;" width="496.1" height="0.4"/>
+<rect x="0" y="99" style="fill:#FFFFFF;" width="496.1" height="0.4"/>
+<rect x="0" y="127.4" style="fill:#FFFFFF;" width="496.1" height="0.4"/>
+<rect x="0" y="155.7" style="fill:#FFFFFF;" width="496.1" height="0.4"/>
+<rect x="0" y="183.6" style="fill:#FFFFFF;" width="496.1" height="1.4"/>
+<rect x="0" y="212.4" style="fill:#FFFFFF;" width="496.1" height="0.4"/>
+<rect x="0" y="240.7" style="fill:#FFFFFF;" width="496.1" height="0.4"/>
+<rect x="0" y="269.1" style="fill:#FFFFFF;" width="496.1" height="0.4"/>
+<rect x="0" y="297.4" style="fill:#FFFFFF;" width="496.1" height="0.4"/>
+<rect x="0" y="325.3" style="fill:#FFFFFF;" width="496.1" height="1.4"/>
+<rect x="0" y="354.1" style="fill:#FFFFFF;" width="496.1" height="0.4"/>
+<rect x="0" y="382.5" style="fill:#FFFFFF;" width="496.1" height="0.4"/>
+<rect x="0" y="410.8" style="fill:#FFFFFF;" width="496.1" height="0.4"/>
+<rect x="0" y="439.2" style="fill:#FFFFFF;" width="496.1" height="0.4"/>
+<rect x="0" y="467" style="fill:#FFFFFF;" width="496.1" height="1.4"/>
+<rect x="0" y="495.9" style="fill:#FFFFFF;" width="496.1" height="0.4"/>
+<rect x="6.9" y="0" style="fill:#FFFFFF;" width="0.4" height="510.2"/>
+<rect x="34.7" y="0" style="fill:#FFFFFF;" width="1.4" height="510.2"/>
+<rect x="63.6" y="0" style="fill:#FFFFFF;" width="0.4" height="510.2"/>
+<rect x="91.9" y="0" style="fill:#FFFFFF;" width="0.4" height="510.2"/>
+<rect x="120.3" y="0" style="fill:#FFFFFF;" width="0.4" height="510.2"/>
+<rect x="148.6" y="0" style="fill:#FFFFFF;" width="0.4" height="510.2"/>
+<rect x="176.5" y="0" style="fill:#FFFFFF;" width="1.4" height="510.2"/>
+<rect x="205.3" y="0" style="fill:#FFFFFF;" width="0.4" height="510.2"/>
+<rect x="233.7" y="0" style="fill:#FFFFFF;" width="0.4" height="510.2"/>
+<rect x="262" y="0" style="fill:#FFFFFF;" width="0.4" height="510.2"/>
+<rect x="290.4" y="0" style="fill:#FFFFFF;" width="0.4" height="510.2"/>
+<rect x="318.2" y="0" style="fill:#FFFFFF;" width="1.4" height="510.2"/>
+<rect x="347" y="0" style="fill:#FFFFFF;" width="0.4" height="510.2"/>
+<rect x="375.4" y="0" style="fill:#FFFFFF;" width="0.4" height="510.2"/>
+<rect x="403.7" y="0" style="fill:#FFFFFF;" width="0.4" height="510.2"/>
+<rect x="432.1" y="0" style="fill:#FFFFFF;" width="0.4" height="510.2"/>
+<rect x="459.9" y="0" style="fill:#FFFFFF;" width="1.4" height="510.2"/>
+<rect x="494.7" y="0" style="fill:#FFFFFF;" width="1.4" height="510.2"/>
+<rect y="0" style="fill:#FFFFFF;" width="1.4" height="510.2"/>
+<rect x="488.8" y="0" style="fill:#FFFFFF;" width="0.4" height="510.2"/>
+</svg>