diff --git a/resources/profiles/QIDITechnology.ini b/resources/profiles/QIDITechnology.ini
index cc46a1f..b237642 100644
--- a/resources/profiles/QIDITechnology.ini
+++ b/resources/profiles/QIDITechnology.ini
@@ -263,7 +263,7 @@ solid_infill_speed = 230
 # Common filament preset
 [filament:*common*]
 advance_pressure = 0.031
-bed_temperature = 60
+bed_temperature = 55
 bridge_fan_speed = 100
 compatible_printers = 
 compatible_printers_condition = 
@@ -313,7 +313,7 @@ filament_unloading_speed = 90
 filament_unloading_speed_start = 100
 filament_vendor = QIDI
 filament_wipe = nil
-first_layer_bed_temperature = 60
+first_layer_bed_temperature = 55
 first_layer_temperature = 210
 first_layer_volume_temperature = 0
 full_fan_speed_layer = 0
@@ -336,7 +336,7 @@ volume_temperature = 0
 [filament:*QIDI ABS Rapido*]
 inherits = *common*
 advance_pressure = 0.021
-bed_temperature = 100
+bed_temperature = 90
 enable_auxiliary_fan = 0
 enable_volume_fan = 40
 extrusion_multiplier = 0.95
@@ -344,8 +344,8 @@ filament_colour = #FFC800
 filament_density = 1.02
 filament_max_volumetric_speed = 22
 filament_type = ABS
-first_layer_bed_temperature = 100
-first_layer_temperature = 240
+first_layer_bed_temperature = 90
+first_layer_temperature = 250
 max_fan_speed = 60
 min_fan_speed = 60
 temperature = 270
@@ -468,7 +468,7 @@ temperature = 300
 [filament:*Generic ABS*]
 inherits = *common*
 advance_pressure = 0.021
-bed_temperature = 100
+bed_temperature = 90
 enable_auxiliary_fan = 0
 enable_volume_fan = 40
 extrusion_multiplier = 0.95
@@ -477,8 +477,8 @@ filament_density = 1.04
 filament_max_volumetric_speed = 17.5
 filament_type = ABS
 filament_vendor = Generic
-first_layer_bed_temperature = 100
-first_layer_temperature = 240
+first_layer_bed_temperature = 90
+first_layer_temperature = 250
 max_fan_speed = 60
 min_fan_speed = 60
 temperature = 260
@@ -504,7 +504,7 @@ temperature = 250
 inherits = *common*
 filament_colour = #0000FF
 filament_density = 1.20
-filament_max_volumetric_speed = 17
+filament_max_volumetric_speed = 14
 filament_vendor = Generic
 
 [filament:*Generic TPU 95A*]
@@ -635,11 +635,29 @@ advance_pressure = 0.024
 filament_max_volumetric_speed = 20
 volume_temperature = 0
 
+[filament:QIDI ABS-GF @X-smart 3]
+inherits = *QIDI ABS-GF*
+compatible_printers_condition = printer_model=="X-smart 3"
+volume_temperature = 0
+
+[filament:QIDI PA12-CF @X-smart 3]
+inherits = *QIDI PA12-CF*
+compatible_printers_condition = printer_model=="X-smart 3"
+
+[filament:QIDI PAHT-CF @X-smart 3]
+inherits = *QIDI PAHT-CF*
+compatible_printers_condition = printer_model=="X-smart 3"
+
+[filament:QIDI PET-CF @X-smart 3]
+inherits = *QIDI PET-CF*
+compatible_printers_condition = printer_model=="X-smart 3"
+
 [filament:QIDI PETG-Tough @X-smart 3]
 inherits = *QIDI PETG-Tough*
 compatible_printers_condition = printer_model=="X-smart 3"
 advance_pressure = 0.048
 filament_max_volumetric_speed = 14
+slowdown_below_layer_time = 8
 
 [filament:QIDI PLA Rapido @X-smart 3]
 inherits = *QIDI PLA Rapido*
@@ -653,6 +671,10 @@ compatible_printers_condition = printer_model=="X-smart 3"
 filament_max_volumetric_speed = 20
 slowdown_below_layer_time = 8
 
+[filament:QIDI UltraPA @X-smart 3]
+inherits = *QIDI UltraPA*
+compatible_printers_condition = printer_model=="X-smart 3"
+
 # X-smart 3 Generic filament preset
 [filament:Generic ABS @X-smart 3]
 inherits = *Generic ABS*
@@ -669,7 +691,6 @@ filament_max_volumetric_speed = 8
 [filament:Generic PLA @X-smart 3]
 inherits = *Generic PLA*
 compatible_printers_condition = printer_model=="X-smart 3"
-filament_max_volumetric_speed = 15
 slowdown_below_layer_time = 8
 
 [filament:Generic TPU 95A @X-smart 3]