Add wipe device

resources/profiles/QIDITechnology.ini

@@ -101,7 +101,7 @@ first_layer_travel_speed = 300
 fuzzy_skin = none
 fuzzy_skin_point_dist = 0.8
 fuzzy_skin_thickness = 0.3
-gap_fill_enabled = 0
+gap_fill_enabled = 1
 gap_fill_speed = 250
 gcode_comments = 0
 gcode_label_objects = firmware
@@ -145,7 +145,7 @@ overhangs = 1
 perimeter_acceleration = 5000
 perimeter_extruder = 1
 perimeter_extrusion_width = 0.45
-perimeter_generator = arachne
+perimeter_generator = classic
 perimeter_speed = 300
 perimeters = 2
 post_process = 
@@ -158,7 +158,7 @@ raft_layers = 0
 resolution = 0
 seam_gap = 15%
 seam_position = aligned
-single_extruder_multi_material_priming = 1
+single_extruder_multi_material_priming = 0
 skirt_distance = 6
 skirt_height = 1
 skirts = 0
@@ -225,14 +225,16 @@ wall_transition_angle = 10
 wall_transition_filter_deviation = 25%
 wall_transition_length = 100%
 wipe_tower = 0
+wipe_tower_acceleration = 10000
 wipe_tower_bridging = 10
-wipe_tower_brim_width = 2
+wipe_tower_brim_width = 3
 wipe_tower_cone_angle = 0
-wipe_tower_extra_spacing = 100%
+wipe_tower_extra_flow = 100%
+wipe_tower_extra_spacing = 200%
 wipe_tower_extruder = 0
 wipe_tower_no_sparse_layers = 0
 wipe_tower_rotation_angle = 0
-wipe_tower_width = 40
+wipe_tower_width = 35
 wipe_tower_x = 180
 wipe_tower_y = 140
 xy_contour_compensation = 0
@@ -667,6 +669,7 @@ filament_multitool_ramming = 0
 filament_multitool_ramming_flow = 10
 filament_multitool_ramming_volume = 10
 filament_notes = ""
+filament_purge_multiplier = 100
 filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
 filament_retract_before_travel = nil
 filament_retract_before_wipe = nil
@@ -681,6 +684,8 @@ filament_settings_id =
 filament_shrink = 100
 filament_soluble = 0
 filament_spool_weight = 0
+filament_stamping_distance = 0
+filament_stamping_loading_speed = 20
 filament_toolchange_delay = 0
 filament_travel_max_lift = nil
 filament_travel_ramping_lift = nil
@@ -2403,7 +2408,7 @@ bed_custom_model =
 bed_custom_texture = 
 bed_exclude_area = 0x0
 bed_shape = 0x0,325x0,325x325,0x325
-before_layer_gcode = 
+before_layer_gcode = ;TIMELAPSE_TAKE_FRAME
 between_objects_gcode = 
 binary_gcode = 0
 chamber_fan = 1
@@ -2444,6 +2449,7 @@ machine_min_travel_rate = 0
 max_layer_height = 0.28
 max_print_height = 315
 min_layer_height = 0.08
+multimaterial_purging = 45
 nozzle_diameter = 0.4
 parking_pos_retraction = 92
 pause_print_gcode = M0
@@ -2461,7 +2467,7 @@ retract_before_travel = 1
 retract_before_wipe = 0%
 retract_layer_change = 1
 retract_length = 1
-retract_length_toolchange = 10
+retract_length_toolchange = 2
 retract_lift = 0.4
 retract_lift_above = 0
 retract_lift_below = 0
@@ -2484,6 +2490,7 @@ use_relative_e_distances = 1
 use_volumetric_e = 0
 variable_layer_height = 1
 wipe = 1
+wipe_device = 0
 wipe_distance = 2
 z_offset = 0
 
@@ -2501,6 +2508,7 @@ max_print_height = 245
 retract_lift_below = 244
 start_gcode = PRINT_START BED=[first_layer_bed_temperature] HOTEND=[first_layer_temperature] CHAMBER=[volume_temperature]\nM83\nG4 P3000\nG0 X{max((min(print_bed_max[0], first_layer_print_min[0] + 80) - 85),0)} Y{max((min(print_bed_max[1], first_layer_print_min[1] + 80) - 85),0)} Z5 F6000\nG0 Z[first_layer_height] F600\nG1 E3 F1800\nG1 X{(min(print_bed_max[0], first_layer_print_min[0] + 80))} E{85 * 0.5 * first_layer_height * nozzle_diameter[0]} F3000\nG1 Y{max((min(print_bed_max[1], first_layer_print_min[1] + 80) - 85),0) + 2} E{2 * 0.5 * first_layer_height * nozzle_diameter[0]} F3000\nG1 X{max((min(print_bed_max[0], first_layer_print_min[0] + 80) - 85),0)} E{85 * 0.5 * first_layer_height * nozzle_diameter[0]} F3000\nG1 Y{max((min(print_bed_max[1], first_layer_print_min[1] + 80) - 85),0) + 85} E{83 * 0.5 * first_layer_height * nozzle_diameter[0]} F3000\nG1 X{max((min(print_bed_max[0], first_layer_print_min[0] + 80) - 85),0) + 2} E{2 * 0.5 * first_layer_height * nozzle_diameter[0]} F3000\nG1 Y{max((min(print_bed_max[1], first_layer_print_min[1] + 80) - 85),0) + 3} E{82 * 0.5 * first_layer_height * nozzle_diameter[0]} F3000\nG1 X{max((min(print_bed_max[0], first_layer_print_min[0] + 80) - 85),0) + 3} Z0\nG1 X{max((min(print_bed_max[0], first_layer_print_min[0] + 80) - 85),0) + 6}\nG1 Z1 F600\n
 thumbnails = 160x160/PNG, 112x112/PNG
+wipe_device = 1
 
 [printer:Q1 Pro 0.2 nozzle]
 inherits = *Q1 Pro*