Update QIDITechnology.ini

resources/profiles/QIDITechnology.ini

@@ -46,6 +46,7 @@ default_materials = QIDI ABS Odorless @X-smart 3 0.4 nozzle;QIDI ABS Rapido @X-s
 
 # Common print presets
 [print:*common*]
+arc_fitting = disabled
 avoid_crossing_curled_overhangs = 0
 avoid_crossing_perimeters = 0
 avoid_crossing_perimeters_max_detour = 0
@@ -93,7 +94,7 @@ fuzzy_skin_thickness = 0.3
 gap_fill_enabled = 0
 gap_fill_speed = 250
 gcode_comments = 0
-gcode_label_objects = 1
+gcode_label_objects = firmware
 gcode_resolution = 0.0125
 gcode_substitutions = 
 infill_acceleration = 10000
@@ -196,7 +197,6 @@ support_tree_tip_diameter = 0.8
 support_tree_top_rate = 15%
 thick_bridges = 0
 thin_walls = 0
-threads = 12
 top_fill_pattern = monotoniclines
 top_infill_extrusion_width = 0.42
 top_solid_infill_acceleration = 2000
@@ -1897,6 +1897,7 @@ bed_exclude_area =
 bed_shape = 0x0,325x0,325x325,0x325
 before_layer_gcode = G92 E0
 between_objects_gcode = 
+binary_gcode = 0
 chamber_fan = 1
 chamber_temperature = 0
 color_change_gcode = M0
@@ -1965,6 +1966,10 @@ start_gcode = PRINT_START\nG28\nM141 S0\nG0 Z50 F600\nM190 S[first_layer_bed_tem
 template_custom_gcode = 
 thumbnails = 
 thumbnails_format = PNG
+travel_lift_before_obstacle = 0
+travel_max_lift = 0.4
+travel_ramping_lift = 1
+travel_slope = 0
 toolchange_gcode = 
 use_firmware_retraction = 0
 use_relative_e_distances = 1
@@ -1981,7 +1986,7 @@ auxiliary_fan = 1
 bed_shape = 0x0,325x0,325x325,0x325
 chamber_temperature = 1
 max_print_height = 315
-thumbnails = 380x380,210x210
+thumbnails = 380x380/PNG, 210x210/PNG
 
 [printer:X-MAX 3 0.2 nozzle]
 inherits = *X-MAX 3*
@@ -2027,7 +2032,7 @@ auxiliary_fan = 1
 bed_shape = 0x0,280x0,280x280,0x280
 chamber_temperature = 1
 max_print_height = 270
-thumbnails = 380x380,210x210
+thumbnails = 380x380/PNG, 210x210/PNG
 
 [printer:X-Plus 3 0.2 nozzle]
 inherits = *X-Plus 3*
@@ -2071,7 +2076,7 @@ inherits = *common*
 printer_model = X-smart 3
 bed_shape = 0x0,175x0,175x180,0x180
 max_print_height = 170
-thumbnails = 205x205,140x140
+thumbnails = 205x205/PNG, 140x140/PNG
 
 [printer:X-smart 3 0.2 nozzle]
 inherits = *X-smart 3*