diff --git a/resources/icons/Q1 Pro_thumbnail.png b/resources/icons/Q1 Pro_thumbnail.png new file mode 100644 index 0000000..d402457 Binary files /dev/null and b/resources/icons/Q1 Pro_thumbnail.png differ diff --git a/resources/profiles/QIDITechnology.ini b/resources/profiles/QIDITechnology.ini index ca63fc9..012fb5a 100644 --- a/resources/profiles/QIDITechnology.ini +++ b/resources/profiles/QIDITechnology.ini @@ -14,6 +14,15 @@ changelog_url = https://qidi3d.com/pages/software-firmware # also the first model installed & the first nozzle installed will be activated after install. # Printer model name will be shown by the installation wizard. +[printer_model:Q1 Pro] +name = Q1 Pro +variants = 0.4; 0.2; 0.6; 0.8 +technology = FFF +family = Q +bed_model = Q1 Pro_bed.stl +bed_texture = Q1 Pro.svg +default_materials = QIDI ABS Odorless @Q1 Pro 0.4 nozzle; QIDI ABS Rapido @Q1 Pro 0.4 nozzle; QIDI PLA Rapido @Q1 Pro 0.4 nozzle; QIDI PLA Rapido Matte @Q1 Pro 0.4 nozzle; QIDI PLA-CF @Q1 Pro 0.4 nozzle; Generic ABS @Q1 Pro 0.4 nozzle; Generic PLA @Q1 Pro 0.4 nozzle + [printer_model:X-MAX 3] name = X-MAX 3 variants = 0.4; 0.2; 0.6; 0.8 @@ -21,7 +30,7 @@ technology = FFF family = X 3 bed_model = X-MAX 3_bed.stl bed_texture = X-MAX 3.svg -default_materials = QIDI ABS Odorless @X-MAX 3 0.4 nozzle; QIDI ABS Rapido @X-MAX 3 0.4 nozzle; QIDI PLA Rapido @X-MAX 3 0.4 nozzle; QIDI PLA Rapido Matte @X-MAX 3 0.4 nozzle; Generic ABS @X-MAX 3 0.4 nozzle; Generic PLA @X-MAX 3 0.4 nozzle +default_materials = QIDI ABS Odorless @X-MAX 3 0.4 nozzle; QIDI ABS Rapido @X-MAX 3 0.4 nozzle; QIDI PLA Rapido @X-MAX 3 0.4 nozzle; QIDI PLA Rapido Matte @X-MAX 3 0.4 nozzle; QIDI PLA-CF @X-MAX 3 0.4 nozzle; Generic ABS @X-MAX 3 0.4 nozzle; Generic PLA @X-MAX 3 0.4 nozzle [printer_model:X-Plus 3] name = X-Plus 3 @@ -30,7 +39,7 @@ technology = FFF family = X 3 bed_model = X-Plus 3_bed.stl bed_texture = X-Plus 3.svg -default_materials = QIDI ABS Odorless @X-Plus 3 0.4 nozzle; QIDI ABS Rapido @X-Plus 3 0.4 nozzle; QIDI PLA Rapido @X-Plus 3 0.4 nozzle; QIDI PLA Rapido Matte @X-Plus 3 0.4 nozzle; Generic ABS @X-Plus 3 0.4 nozzle; Generic PLA @X-Plus 3 0.4 nozzle +default_materials = QIDI ABS Odorless @X-Plus 3 0.4 nozzle; QIDI ABS Rapido @X-Plus 3 0.4 nozzle; QIDI PLA Rapido @X-Plus 3 0.4 nozzle; QIDI PLA Rapido Matte @X-Plus 3 0.4 nozzle; QIDI PLA-CF @X-Plus 3 0.4 nozzle; Generic ABS @X-Plus 3 0.4 nozzle; Generic PLA @X-Plus 3 0.4 nozzle [printer_model:X-smart 3] name = X-smart 3 @@ -39,7 +48,7 @@ technology = FFF family = X 3 bed_model = X-smart 3_bed.stl bed_texture = X-smart 3.svg -default_materials = QIDI ABS Odorless @X-smart 3 0.4 nozzle;QIDI ABS Rapido @X-smart 3 0.4 nozzle; QIDI PLA Rapido @X-smart 3 0.4 nozzle; QIDI PLA Rapido Matte @X-smart 3 0.4 nozzle; Generic ABS @X-smart 3 0.4 nozzle; Generic PLA @X-smart 3 0.4 nozzle +default_materials = QIDI ABS Odorless @X-smart 3 0.4 nozzle;QIDI ABS Rapido @X-smart 3 0.4 nozzle; QIDI PLA Rapido @X-smart 3 0.4 nozzle; QIDI PLA Rapido Matte @X-smart 3 0.4 nozzle; QIDI PLA-CF @X-smart 3 0.4 nozzle; Generic ABS @X-smart 3 0.4 nozzle; Generic PLA @X-smart 3 0.4 nozzle # All presets starting with asterisk, for example *common*, are intermediate and they will # not make it into the user interface. @@ -230,6 +239,11 @@ xy_contour_compensation = 0 xy_hole_compensation = 0 # Machine Print preset +[print:*Q1 Pro*] +inherits = *common* +external_perimeter_acceleration = 5000 +perimeter_acceleration = 7000 + [print:*X-MAX 3*] inherits = *common* @@ -392,6 +406,62 @@ inherits = *0.8 nozzle* layer_height = 0.48 # Print preset +# Q1 Pro 0.2 nozzle Print preset +[print:0.08mm Extra High @Q1 Pro 0.2 nozzle] +inherits = *Q1 Pro*; *0.08mm Extra High* +compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.2 + +[print:0.12mm Fine @Q1 Pro 0.2 nozzle] +inherits = *Q1 Pro*; *0.12mm Fine* +compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.2 + +# Q1 Pro 0.4 nozzle Print preset +[print:0.12mm Extra High @Q1 Pro 0.4 nozzle] +inherits = *Q1 Pro*; *0.12mm Extra High* +compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.4 + +[print:0.16mm High @Q1 Pro 0.4 nozzle] +inherits = *Q1 Pro*; *0.16mm High* +compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.4 + +[print:0.20mm Fine @Q1 Pro 0.4 nozzle] +inherits = *Q1 Pro*; *0.20mm Fine* +compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.4 + +[print:0.20mm Strength @Q1 Pro 0.4 nozzle] +inherits = *Q1 Pro*; *0.20mm Strength* +compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.4 + +[print:0.24mm Quick @Q1 Pro 0.4 nozzle] +inherits = *Q1 Pro*; *0.24mm Quick* +compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.4 + +# Q1 Pro 0.6 nozzle Print preset +[print:0.24mm High @Q1 Pro 0.6 nozzle] +inherits = *Q1 Pro*; *0.24mm High* +compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.6 + +[print:0.30mm Fine @Q1 Pro 0.6 nozzle] +inherits = *Q1 Pro*; *0.30mm Fine* +compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.6 + +[print:0.36mm Fine @Q1 Pro 0.6 nozzle] +inherits = *Q1 Pro*; *0.36mm Quick* +compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.6 + +# Q1 Pro 0.8 nozzle Print preset +[print:0.32mm High @Q1 Pro 0.8 nozzle] +inherits = *Q1 Pro*; *0.32mm High* +compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.8 + +[print:0.40mm Fine @Q1 Pro 0.8 nozzle] +inherits = *Q1 Pro*; *0.40mm Fine* +compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.8 + +[print:0.48mm Fine @Q1 Pro 0.8 nozzle] +inherits = *Q1 Pro*; *0.48mm Quick* +compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.8 + # X-MAX 3 0.2 nozzle Print preset [print:0.08mm Extra High @X-MAX 3 0.2 nozzle] inherits = *X-MAX 3*; *0.08mm Extra High* @@ -634,7 +704,7 @@ overhang_fan_speed_0 = 0 overhang_fan_speed_1 = 0 overhang_fan_speed_2 = 0 overhang_fan_speed_3 = 0 -slowdown_below_layer_time = 5 +slowdown_below_layer_time = 8 smooth_time = 0.03 start_filament_gcode = "; Filament gcode\n{if (enable_advance_pressure[0] == true)}M900 K[advance_pressure]{else}M900 K0{endif} T[smooth_time]\n" temperature = 220 @@ -703,6 +773,7 @@ max_fan_speed = 20 min_fan_speed = 20 overhang_fan_speed_0 = 100 overhang_fan_speed_1 = 100 +slowdown_below_layer_time = 5 temperature = 270 volume_temperature = 55 @@ -772,7 +843,6 @@ fan_below_layer_time = 10 filament_colour = #696969 filament_density = 1.09 filament_max_volumetric_speed = 10 -filament_travel_ramping_lift = 0 filament_type = PA12-CF first_layer_bed_temperature = 80 first_layer_temperature = 290 @@ -796,7 +866,6 @@ fan_below_layer_time = 10 filament_colour = #4F4F4F filament_density = 1.20 filament_max_volumetric_speed = 14 -filament_travel_ramping_lift = 0 filament_type = PAHT-CF first_layer_bed_temperature = 80 first_layer_temperature = 310 @@ -842,7 +911,6 @@ fan_below_layer_time = 10 filament_colour = #323232 filament_density = 1.30 filament_max_volumetric_speed = 12 -filament_travel_ramping_lift = 0 filament_type = PET-CF first_layer_bed_temperature = 80 first_layer_temperature = 320 @@ -873,7 +941,6 @@ max_fan_speed = 40 min_fan_speed = 10 overhang_fan_speed_0 = 100 overhang_fan_speed_1 = 100 -slowdown_below_layer_time = 8 temperature = 250 [filament:*QIDI PLA Rapido*] @@ -885,6 +952,17 @@ filament_colour = #0073E6 filament_density = 1.42 filament_max_volumetric_speed = 21 +[filament:*QIDI PLA-CF*] +inherits = *common* +advance_pressure = 0.02 +extrusion_multiplier = 0.96 +filament_colour = #27408B +filament_density = 1.25 +filament_max_volumetric_speed = 9 +filament_type = PLA-CF +first_layer_temperature = 230 +temperature = 230 + [filament:*QIDI UltraPA*] inherits = *common* advance_pressure = 0.03 @@ -945,7 +1023,7 @@ max_fan_speed = 40 min_fan_speed = 10 overhang_fan_speed_0 = 100 overhang_fan_speed_1 = 100 -slowdown_below_layer_time = 4 +slowdown_below_layer_time = 12 temperature = 250 [filament:*Generic PLA*] @@ -965,9 +1043,412 @@ filament_max_volumetric_speed = 4 filament_type = TPU filament_vendor = Generic first_layer_temperature = 230 -slowdown_below_layer_time = 8 temperature = 230 +# Q1 Pro 0.2 nozzle QIDI filament preset +[filament:QIDI ABS Odorless @Q1 Pro 0.2 nozzle] +inherits = *QIDI ABS Odorless* +filament_max_volumetric_speed = 2 +temperature = 260 +volume_temperature = 0 +compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.2 + +[filament:QIDI ABS Rapido @Q1 Pro 0.2 nozzle] +inherits = *QIDI ABS Rapido* +filament_max_volumetric_speed = 2 +temperature = 260 +volume_temperature = 0 +compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.2 + +[filament:QIDI ASA @Q1 Pro 0.2 nozzle] +inherits = *QIDI ASA* +filament_max_volumetric_speed = 2 +temperature = 255 +volume_temperature = 0 +compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.2 + +[filament:QIDI PETG-Tough @Q1 Pro 0.2 nozzle] +inherits = *QIDI PETG-Tough* +filament_max_volumetric_speed = 1 +compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.2 + +[filament:QIDI PLA Rapido @Q1 Pro 0.2 nozzle] +inherits = *QIDI PLA Rapido* +advance_pressure = 0.042 +filament_max_volumetric_speed = 2 +temperature = 210 +compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.2 + +[filament:QIDI PLA Rapido Matte @Q1 Pro 0.2 nozzle] +inherits = *QIDI PLA Rapido Matte* +advance_pressure = 0.042 +filament_max_volumetric_speed = 2 +temperature = 210 +compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.2 + +# Q1 Pro 0.2 nozzle Generic filament preset +[filament:Generic ABS @Q1 Pro 0.2 nozzle] +inherits = *Generic ABS* +filament_max_volumetric_speed = 2 +temperature = 250 +compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.2 + +[filament:Generic PETG @Q1 Pro 0.2 nozzle] +inherits = *Generic PETG* +filament_max_volumetric_speed = 1 +compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.2 + +[filament:Generic PLA @Q1 Pro 0.2 nozzle] +inherits = *Generic PLA* +advance_pressure = 0.042 +filament_max_volumetric_speed = 2 +temperature = 210 +compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.2 + +# Q1 Pro 0.4 nozzle QIDI filament preset +[filament:QIDI ABS Odorless @Q1 Pro 0.4 nozzle] +inherits = *QIDI ABS Odorless* +advance_pressure = 0.035 +temperature = 260 +compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.4 + +[filament:QIDI ABS Rapido @Q1 Pro 0.4 nozzle] +inherits = *QIDI ABS Rapido* +advance_pressure = 0.035 +filament_max_volumetric_speed = 24.5 +temperature = 260 +compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.4 + +[filament:QIDI ABS-GF @Q1 Pro 0.4 nozzle] +inherits = *QIDI ABS-GF* +advance_pressure = 0.035 +filament_max_volumetric_speed = 22 +first_layer_temperature = 260 +temperature = 260 +compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.4 + +[filament:QIDI ASA @Q1 Pro 0.4 nozzle] +inherits = *QIDI ASA* +advance_pressure = 0.035 +temperature = 255 +compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.4 + +[filament:QIDI ASA-Aero @Q1 Pro 0.4 nozzle] +inherits = *QIDI ASA-Aero* +temperature = 260 +compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.4 + +[filament:QIDI PA12-CF @Q1 Pro 0.4 nozzle] +inherits = *QIDI PA12-CF* +advance_pressure = 0.035 +filament_max_volumetric_speed = 13 +first_layer_temperature = 280 +temperature = 280 +compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.4 + +[filament:QIDI PAHT-CF @Q1 Pro 0.4 nozzle] +inherits = *QIDI PAHT-CF* +advance_pressure = 0.032 +first_layer_temperature = 300 +temperature = 300 +compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.4 + +[filament:QIDI PC/ABS-FR @Q1 Pro 0.4 nozzle] +inherits = *QIDI PC/ABS-FR* +advance_pressure = 0.082 +compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.4 + +[filament:QIDI PET-CF @Q1 Pro 0.4 nozzle] +inherits = *QIDI PET-CF* +advance_pressure = 0.032 +filament_max_volumetric_speed = 15 +first_layer_temperature = 280 +temperature = 280 +compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.4 + +[filament:QIDI PETG-Tough @Q1 Pro 0.4 nozzle] +inherits = *QIDI PETG-Tough* +advance_pressure = 0.086 +filament_max_volumetric_speed = 13 +compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.4 + +[filament:QIDI PLA Rapido @Q1 Pro 0.4 nozzle] +inherits = *QIDI PLA Rapido* +advance_pressure = 0.042 +filament_max_volumetric_speed = 24.5 +temperature = 210 +compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.4 + +[filament:QIDI PLA Rapido Matte @Q1 Pro 0.4 nozzle] +inherits = *QIDI PLA Rapido Matte* +advance_pressure = 0.042 +filament_max_volumetric_speed = 24.5 +temperature = 210 +compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.4 + +[filament:QIDI PLA-CF @Q1 Pro 0.4 nozzle] +inherits = *QIDI PLA-CF* +advance_pressure = 0.034 +extrusion_multiplier = 0.93 +filament_max_volumetric_speed = 15 +first_layer_temperature = 220 +temperature = 220 +compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.4 + +[filament:QIDI UltraPA @Q1 Pro 0.4 nozzle] +inherits = *QIDI UltraPA* +filament_max_volumetric_speed = 4 +compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.4 + +# Q1 Pro 0.4 nozzle Generic filament preset +[filament:Generic ABS @Q1 Pro 0.4 nozzle] +inherits = *Generic ABS* +temperature = 250 +compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.4 + +[filament:Generic PETG @Q1 Pro 0.4 nozzle] +inherits = *Generic PETG* +advance_pressure = 0.086 +compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.4 + +[filament:Generic PLA @Q1 Pro 0.4 nozzle] +inherits = *Generic PLA* +advance_pressure = 0.042 +temperature = 210 +compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.4 + +[filament:Generic TPU 95A @Q1 Pro 0.4 nozzle] +inherits = *Generic TPU 95A* +compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.4 + +# Q1 Pro 0.6 nozzle QIDI filament preset +[filament:QIDI ABS Odorless @Q1 Pro 0.6 nozzle] +inherits = *QIDI ABS Odorless* +advance_pressure = 0.014 +filament_max_volumetric_speed = 24.5 +temperature = 250 +compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.6 + +[filament:QIDI ABS Rapido @Q1 Pro 0.6 nozzle] +inherits = *QIDI ABS Rapido* +advance_pressure = 0.014 +filament_max_volumetric_speed = 24.5 +temperature = 250 +compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.6 + +[filament:QIDI ABS-GF @Q1 Pro 0.6 nozzle] +inherits = *QIDI ABS-GF* +filament_max_volumetric_speed = 22 +first_layer_temperature = 260 +temperature = 260 +compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.6 + +[filament:QIDI ASA @Q1 Pro 0.6 nozzle] +inherits = *QIDI ASA* +advance_pressure = 0.014 +filament_max_volumetric_speed = 13 +temperature = 255 +compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.6 + +[filament:QIDI PA12-CF @Q1 Pro 0.6 nozzle] +inherits = *QIDI PA12-CF* +advance_pressure = 0.035 +filament_max_volumetric_speed = 13 +first_layer_temperature = 280 +temperature = 280 +compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.6 + +[filament:QIDI PAHT-CF @Q1 Pro 0.6 nozzle] +inherits = *QIDI PAHT-CF* +advance_pressure = 0.032 +first_layer_temperature = 300 +temperature = 300 +compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.6 + +[filament:QIDI PC/ABS-FR @Q1 Pro 0.6 nozzle] +inherits = *QIDI PC/ABS-FR* +advance_pressure = 0.082 +compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.6 + +[filament:QIDI PET-CF @Q1 Pro 0.6 nozzle] +inherits = *QIDI PET-CF* +advance_pressure = 0.025 +filament_max_volumetric_speed = 15 +first_layer_temperature = 280 +temperature = 280 +compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.6 + +[filament:QIDI PETG-Tough @Q1 Pro 0.6 nozzle] +inherits = *QIDI PETG-Tough* +filament_max_volumetric_speed = 13 +compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.6 + +[filament:QIDI PLA Rapido @Q1 Pro 0.6 nozzle] +inherits = *QIDI PLA Rapido* +advance_pressure = 0.016 +filament_max_volumetric_speed = 24.5 +temperature = 210 +compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.6 + +[filament:QIDI PLA Rapido Matte @Q1 Pro 0.6 nozzle] +inherits = *QIDI PLA Rapido Matte* +advance_pressure = 0.016 +filament_max_volumetric_speed = 24.5 +temperature = 210 +compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.6 + +[filament:QIDI PLA-CF @Q1 Pro 0.6 nozzle] +inherits = *QIDI PLA-CF* +advance_pressure = 0.012 +extrusion_multiplier = 0.93 +filament_max_volumetric_speed = 15 +first_layer_temperature = 220 +temperature = 220 +compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.6 + +[filament:QIDI UltraPA @Q1 Pro 0.6 nozzle] +inherits = *QIDI UltraPA* +filament_max_volumetric_speed = 4 +compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.6 + +# Q1 Pro 0.6 nozzle Generic filament preset +[filament:Generic ABS @Q1 Pro 0.6 nozzle] +inherits = *Generic ABS* +advance_pressure = 0.014 +filament_max_volumetric_speed = 24.5 +temperature = 250 +compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.6 + +[filament:Generic PETG @Q1 Pro 0.6 nozzle] +inherits = *Generic PETG* +compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.6 + +[filament:Generic PLA @Q1 Pro 0.6 nozzle] +inherits = *Generic PLA* +advance_pressure = 0.016 +temperature = 210 +compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.6 + +[filament:Generic TPU 95A @Q1 Pro 0.6 nozzle] +inherits = *Generic TPU 95A* +compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.6 + +# Q1 Pro 0.8 nozzle QIDI filament preset +[filament:QIDI ABS Odorless @Q1 Pro 0.8 nozzle] +inherits = *QIDI ABS Odorless* +advance_pressure = 0.011 +filament_max_volumetric_speed = 24.5 +min_print_speed = 10 +temperature = 250 +compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.8 + +[filament:QIDI ABS Rapido @Q1 Pro 0.8 nozzle] +inherits = *QIDI ABS Rapido* +advance_pressure = 0.011 +filament_max_volumetric_speed = 24.5 +min_print_speed = 10 +temperature = 250 +compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.8 + +[filament:QIDI ABS-GF @Q1 Pro 0.8 nozzle] +inherits = *QIDI ABS-GF* +filament_max_volumetric_speed = 22 +first_layer_temperature = 260 +temperature = 260 +compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.8 + +[filament:QIDI ASA @Q1 Pro 0.8 nozzle] +inherits = *QIDI ASA* +advance_pressure = 0.011 +filament_max_volumetric_speed = 13 +min_print_speed = 10 +temperature = 255 +compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.8 + +[filament:QIDI PA12-CF @Q1 Pro 0.8 nozzle] +inherits = *QIDI PA12-CF* +advance_pressure = 0.035 +filament_max_volumetric_speed = 13 +first_layer_temperature = 280 +temperature = 280 +compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.8 + +[filament:QIDI PAHT-CF @Q1 Pro 0.8 nozzle] +inherits = *QIDI PAHT-CF* +advance_pressure = 0.032 +first_layer_temperature = 300 +temperature = 300 +compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.8 + +[filament:QIDI PC/ABS-FR @Q1 Pro 0.8 nozzle] +inherits = *QIDI PC/ABS-FR* +advance_pressure = 0.082 +compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.8 + +[filament:QIDI PET-CF @Q1 Pro 0.8 nozzle] +inherits = *QIDI PET-CF* +advance_pressure = 0.025 +filament_max_volumetric_speed = 15 +first_layer_temperature = 280 +temperature = 280 +compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.8 + +[filament:QIDI PETG-Tough @Q1 Pro 0.8 nozzle] +inherits = *QIDI PETG-Tough* +filament_max_volumetric_speed = 13 +compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.8 + +[filament:QIDI PLA Rapido @Q1 Pro 0.8 nozzle] +inherits = *QIDI PLA Rapido* +advance_pressure = 0.008 +filament_max_volumetric_speed = 24.5 +temperature = 210 +compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.8 + +[filament:QIDI PLA Rapido Matte @Q1 Pro 0.8 nozzle] +inherits = *QIDI PLA Rapido Matte* +advance_pressure = 0.008 +filament_max_volumetric_speed = 24.5 +temperature = 210 +compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.8 + +[filament:QIDI PLA-CF @Q1 Pro 0.8 nozzle] +inherits = *QIDI PLA-CF* +advance_pressure = 0.008 +extrusion_multiplier = 0.93 +filament_max_volumetric_speed = 18 +first_layer_temperature = 220 +temperature = 220 +compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.8 + +[filament:QIDI UltraPA @Q1 Pro 0.8 nozzle] +inherits = *QIDI UltraPA* +filament_max_volumetric_speed = 4 +compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.8 + +# Q1 Pro 0.8 nozzle Generic filament preset +[filament:Generic ABS @Q1 Pro 0.8 nozzle] +inherits = *Generic ABS* +advance_pressure = 0.011 +filament_max_volumetric_speed = 24.5 +temperature = 250 +compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.8 + +[filament:Generic PETG @Q1 Pro 0.8 nozzle] +inherits = *Generic PETG* +compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.8 + +[filament:Generic PLA @Q1 Pro 0.8 nozzle] +inherits = *Generic PLA* +advance_pressure = 0.008 +temperature = 210 +compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.8 + +[filament:Generic TPU 95A @Q1 Pro 0.8 nozzle] +inherits = *Generic TPU 95A* +temperature = 220 +compatible_printers_condition = printer_model=="Q1 Pro" and nozzle_diameter[0]==0.8 + # X-MAX 3 0.2 nozzle QIDI filament preset [filament:QIDI ABS Odorless @X-MAX 3 0.2 nozzle] inherits = *QIDI ABS Odorless* @@ -1076,6 +1557,10 @@ compatible_printers_condition = printer_model=="X-MAX 3" and nozzle_diameter[0]= inherits = *QIDI PLA Rapido Matte* compatible_printers_condition = printer_model=="X-MAX 3" and nozzle_diameter[0]==0.4 +[filament:QIDI PLA-CF @X-MAX 3 0.4 nozzle] +inherits = *QIDI PLA-CF* +compatible_printers_condition = printer_model=="X-MAX 3" and nozzle_diameter[0]==0.4 + [filament:QIDI UltraPA @X-MAX 3 0.4 nozzle] inherits = *QIDI UltraPA* compatible_printers_condition = printer_model=="X-MAX 3" and nozzle_diameter[0]==0.4 @@ -1146,13 +1631,16 @@ compatible_printers_condition = printer_model=="X-MAX 3" and nozzle_diameter[0]= [filament:QIDI PLA Rapido @X-MAX 3 0.6 nozzle] inherits = *QIDI PLA Rapido* advance_pressure = 0.016 -slowdown_below_layer_time = 6 compatible_printers_condition = printer_model=="X-MAX 3" and nozzle_diameter[0]==0.6 [filament:QIDI PLA Rapido Matte @X-MAX 3 0.6 nozzle] inherits = *QIDI PLA Rapido Matte* advance_pressure = 0.016 -slowdown_below_layer_time = 6 +compatible_printers_condition = printer_model=="X-MAX 3" and nozzle_diameter[0]==0.6 + +[filament:QIDI PLA-CF @X-MAX 3 0.6 nozzle] +inherits = *QIDI PLA-CF* +advance_pressure = 0.01 compatible_printers_condition = printer_model=="X-MAX 3" and nozzle_diameter[0]==0.6 [filament:QIDI UltraPA @X-MAX 3 0.6 nozzle] @@ -1174,7 +1662,6 @@ compatible_printers_condition = printer_model=="X-MAX 3" and nozzle_diameter[0]= [filament:Generic PLA @X-MAX 3 0.6 nozzle] inherits = *Generic PLA* advance_pressure = 0.016 -slowdown_below_layer_time = 6 compatible_printers_condition = printer_model=="X-MAX 3" and nozzle_diameter[0]==0.6 [filament:Generic TPU 95A @X-MAX 3 0.6 nozzle] @@ -1235,13 +1722,17 @@ compatible_printers_condition = printer_model=="X-MAX 3" and nozzle_diameter[0]= [filament:QIDI PLA Rapido @X-MAX 3 0.8 nozzle] inherits = *QIDI PLA Rapido* advance_pressure = 0.008 -slowdown_below_layer_time = 6 compatible_printers_condition = printer_model=="X-MAX 3" and nozzle_diameter[0]==0.8 [filament:QIDI PLA Rapido Matte @X-MAX 3 0.8 nozzle] inherits = *QIDI PLA Rapido Matte* advance_pressure = 0.008 -slowdown_below_layer_time = 6 +compatible_printers_condition = printer_model=="X-MAX 3" and nozzle_diameter[0]==0.8 + +[filament:QIDI PLA-CF @X-MAX 3 0.8 nozzle] +inherits = *QIDI PLA-CF* +advance_pressure = 0.008 +filament_max_volumetric_speed = 18 compatible_printers_condition = printer_model=="X-MAX 3" and nozzle_diameter[0]==0.8 [filament:QIDI UltraPA @X-MAX 3 0.8 nozzle] @@ -1263,7 +1754,6 @@ compatible_printers_condition = printer_model=="X-MAX 3" and nozzle_diameter[0]= [filament:Generic PLA @X-MAX 3 0.8 nozzle] inherits = *Generic PLA* advance_pressure = 0.008 -slowdown_below_layer_time = 6 compatible_printers_condition = printer_model=="X-MAX 3" and nozzle_diameter[0]==0.8 [filament:Generic TPU 95A @X-MAX 3 0.8 nozzle] @@ -1379,6 +1869,10 @@ compatible_printers_condition = printer_model=="X-Plus 3" and nozzle_diameter[0] inherits = *QIDI PLA Rapido Matte* compatible_printers_condition = printer_model=="X-Plus 3" and nozzle_diameter[0]==0.4 +[filament:QIDI PLA-CF @X-Plus 3 0.4 nozzle] +inherits = *QIDI PLA-CF* +compatible_printers_condition = printer_model=="X-Plus 3" and nozzle_diameter[0]==0.4 + [filament:QIDI UltraPA @X-Plus 3 0.4 nozzle] inherits = *QIDI UltraPA* compatible_printers_condition = printer_model=="X-Plus 3" and nozzle_diameter[0]==0.4 @@ -1449,13 +1943,16 @@ compatible_printers_condition = printer_model=="X-Plus 3" and nozzle_diameter[0] [filament:QIDI PLA Rapido @X-Plus 3 0.6 nozzle] inherits = *QIDI PLA Rapido* advance_pressure = 0.016 -slowdown_below_layer_time = 6 compatible_printers_condition = printer_model=="X-Plus 3" and nozzle_diameter[0]==0.6 [filament:QIDI PLA Rapido Matte @X-Plus 3 0.6 nozzle] inherits = *QIDI PLA Rapido Matte* advance_pressure = 0.016 -slowdown_below_layer_time = 6 +compatible_printers_condition = printer_model=="X-Plus 3" and nozzle_diameter[0]==0.6 + +[filament:QIDI PLA-CF @X-Plus 3 0.6 nozzle] +inherits = *QIDI PLA-CF* +advance_pressure = 0.01 compatible_printers_condition = printer_model=="X-Plus 3" and nozzle_diameter[0]==0.6 [filament:QIDI UltraPA @X-Plus 3 0.6 nozzle] @@ -1477,7 +1974,6 @@ compatible_printers_condition = printer_model=="X-Plus 3" and nozzle_diameter[0] [filament:Generic PLA @X-Plus 3 0.6 nozzle] inherits = *Generic PLA* advance_pressure = 0.016 -slowdown_below_layer_time = 6 compatible_printers_condition = printer_model=="X-Plus 3" and nozzle_diameter[0]==0.6 [filament:Generic TPU 95A @X-Plus 3 0.6 nozzle] @@ -1538,13 +2034,17 @@ compatible_printers_condition = printer_model=="X-Plus 3" and nozzle_diameter[0] [filament:QIDI PLA Rapido @X-Plus 3 0.8 nozzle] inherits = *QIDI PLA Rapido* advance_pressure = 0.008 -slowdown_below_layer_time = 6 compatible_printers_condition = printer_model=="X-Plus 3" and nozzle_diameter[0]==0.8 [filament:QIDI PLA Rapido Matte @X-Plus 3 0.8 nozzle] inherits = *QIDI PLA Rapido Matte* advance_pressure = 0.008 -slowdown_below_layer_time = 6 +compatible_printers_condition = printer_model=="X-Plus 3" and nozzle_diameter[0]==0.8 + +[filament:QIDI PLA-CF @X-Plus 3 0.8 nozzle] +inherits = *QIDI PLA-CF* +advance_pressure = 0.008 +filament_max_volumetric_speed = 18 compatible_printers_condition = printer_model=="X-Plus 3" and nozzle_diameter[0]==0.8 [filament:QIDI UltraPA @X-Plus 3 0.8 nozzle] @@ -1566,7 +2066,6 @@ compatible_printers_condition = printer_model=="X-Plus 3" and nozzle_diameter[0] [filament:Generic PLA @X-Plus 3 0.8 nozzle] inherits = *Generic PLA* advance_pressure = 0.008 -slowdown_below_layer_time = 6 compatible_printers_condition = printer_model=="X-Plus 3" and nozzle_diameter[0]==0.8 [filament:Generic TPU 95A @X-Plus 3 0.8 nozzle] @@ -1682,13 +2181,15 @@ compatible_printers_condition = printer_model=="X-smart 3" and nozzle_diameter[0 [filament:QIDI PLA Rapido @X-smart 3 0.4 nozzle] inherits = *QIDI PLA Rapido* filament_max_volumetric_speed = 19 -slowdown_below_layer_time = 8 compatible_printers_condition = printer_model=="X-smart 3" and nozzle_diameter[0]==0.4 [filament:QIDI PLA Rapido Matte @X-smart 3 0.4 nozzle] inherits = *QIDI PLA Rapido Matte* filament_max_volumetric_speed = 20 -slowdown_below_layer_time = 8 +compatible_printers_condition = printer_model=="X-smart 3" and nozzle_diameter[0]==0.4 + +[filament:QIDI PLA-CF @X-smart 3 0.4 nozzle] +inherits = *QIDI PLA-CF* compatible_printers_condition = printer_model=="X-smart 3" and nozzle_diameter[0]==0.4 [filament:QIDI UltraPA @X-smart 3 0.4 nozzle] @@ -1710,7 +2211,6 @@ compatible_printers_condition = printer_model=="X-smart 3" and nozzle_diameter[0 [filament:Generic PLA @X-smart 3 0.4 nozzle] inherits = *Generic PLA* -slowdown_below_layer_time = 8 compatible_printers_condition = printer_model=="X-smart 3" and nozzle_diameter[0]==0.4 [filament:Generic TPU 95A @X-smart 3 0.4 nozzle] @@ -1766,13 +2266,16 @@ compatible_printers_condition = printer_model=="X-smart 3" and nozzle_diameter[0 [filament:QIDI PLA Rapido @X-smart 3 0.6 nozzle] inherits = *QIDI PLA Rapido* advance_pressure = 0.016 -slowdown_below_layer_time = 6 compatible_printers_condition = printer_model=="X-smart 3" and nozzle_diameter[0]==0.6 [filament:QIDI PLA Rapido Matte @X-smart 3 0.6 nozzle] inherits = *QIDI PLA Rapido Matte* advance_pressure = 0.016 -slowdown_below_layer_time = 6 +compatible_printers_condition = printer_model=="X-smart 3" and nozzle_diameter[0]==0.6 + +[filament:QIDI PLA-CF @X-smart 3 0.6 nozzle] +inherits = *QIDI PLA-CF* +advance_pressure = 0.01 compatible_printers_condition = printer_model=="X-smart 3" and nozzle_diameter[0]==0.6 [filament:QIDI UltraPA @X-smart 3 0.6 nozzle] @@ -1793,7 +2296,6 @@ compatible_printers_condition = printer_model=="X-smart 3" and nozzle_diameter[0 [filament:Generic PLA @X-smart 3 0.6 nozzle] inherits = *Generic PLA* advance_pressure = 0.016 -slowdown_below_layer_time = 6 compatible_printers_condition = printer_model=="X-smart 3" and nozzle_diameter[0]==0.6 [filament:Generic TPU 95A @X-smart 3 0.6 nozzle] @@ -1855,13 +2357,17 @@ compatible_printers_condition = printer_model=="X-smart 3" and nozzle_diameter[0 [filament:QIDI PLA Rapido @X-smart 3 0.8 nozzle] inherits = *QIDI PLA Rapido* advance_pressure = 0.008 -slowdown_below_layer_time = 6 compatible_printers_condition = printer_model=="X-smart 3" and nozzle_diameter[0]==0.8 [filament:QIDI PLA Rapido Matte @X-smart 3 0.8 nozzle] inherits = *QIDI PLA Rapido Matte* advance_pressure = 0.008 -slowdown_below_layer_time = 6 +compatible_printers_condition = printer_model=="X-smart 3" and nozzle_diameter[0]==0.8 + +[filament:QIDI PLA-CF @X-smart 3 0.8 nozzle] +inherits = *QIDI PLA-CF* +advance_pressure = 0.008 +filament_max_volumetric_speed = 18 compatible_printers_condition = printer_model=="X-smart 3" and nozzle_diameter[0]==0.8 [filament:QIDI UltraPA @X-smart 3 0.8 nozzle] @@ -1882,7 +2388,6 @@ compatible_printers_condition = printer_model=="X-smart 3" and nozzle_diameter[0 [filament:Generic PLA @X-smart 3 0.8 nozzle] inherits = *Generic PLA* advance_pressure = 0.008 -slowdown_below_layer_time = 6 compatible_printers_condition = printer_model=="X-smart 3" and nozzle_diameter[0]==0.8 [filament:Generic TPU 95A @X-smart 3 0.8 nozzle] @@ -1896,8 +2401,7 @@ autoemit_temperature_commands = 1 auxiliary_fan = 0 bed_custom_model = bed_custom_texture = -bed_exclude_area_0 = -bed_exclude_area_1 = +bed_exclude_area = 0x0 bed_shape = 0x0,325x0,325x325,0x325 before_layer_gcode = between_objects_gcode = @@ -1973,7 +2477,7 @@ thumbnails_format = PNG travel_lift_before_obstacle = 0 travel_max_lift = 0.4 travel_ramping_lift = 1 -travel_slope = 1 +travel_slope = 3 toolchange_gcode = use_firmware_retraction = 0 use_relative_e_distances = 1 @@ -1983,6 +2487,58 @@ wipe = 1 wipe_distance = 2 z_offset = 0 +# Q1 Pro preset +[printer:*Q1 Pro*] +inherits = *common* +printer_model = Q1 Pro +autoemit_temperature_commands = 0 +auxiliary_fan = 1 +bed_exclude_area = 0x0,0x0,25x240,25x245,115x245,115x240,25x240,0x0,0x0,208x240,208x245,245x245,245x240,208x240,0x0 +bed_shape = 0x0,245x0,245x245,0x245 +chamber_temperature = 1 +layer_gcode = G92 E0\n;LOG_Z +max_print_height = 245 +retract_lift_below = 244 +start_gcode = PRINT_START BED=[first_layer_bed_temperature] HOTEND=[first_layer_temperature] CHAMBER=[volume_temperature]\nM83\nG4 P3000\nG0 X{max((min(print_bed_max[0], first_layer_print_min[0] + 80) - 85),0)} Y{max((min(print_bed_max[1], first_layer_print_min[1] + 80) - 85),0)} Z5 F6000\nG0 Z[first_layer_height] F600\nG1 E3 F1800\nG1 X{(min(print_bed_max[0], first_layer_print_min[0] + 80))} E{85 * 0.5 * first_layer_height * nozzle_diameter[0]} F3000\nG1 Y{max((min(print_bed_max[1], first_layer_print_min[1] + 80) - 85),0) + 2} E{2 * 0.5 * first_layer_height * nozzle_diameter[0]} F3000\nG1 X{max((min(print_bed_max[0], first_layer_print_min[0] + 80) - 85),0)} E{85 * 0.5 * first_layer_height * nozzle_diameter[0]} F3000\nG1 Y{max((min(print_bed_max[1], first_layer_print_min[1] + 80) - 85),0) + 85} E{83 * 0.5 * first_layer_height * nozzle_diameter[0]} F3000\nG1 X{max((min(print_bed_max[0], first_layer_print_min[0] + 80) - 85),0) + 2} E{2 * 0.5 * first_layer_height * nozzle_diameter[0]} F3000\nG1 Y{max((min(print_bed_max[1], first_layer_print_min[1] + 80) - 85),0) + 3} E{82 * 0.5 * first_layer_height * nozzle_diameter[0]} F3000\nG1 X{max((min(print_bed_max[0], first_layer_print_min[0] + 80) - 85),0) + 3} Z0\nG1 X{max((min(print_bed_max[0], first_layer_print_min[0] + 80) - 85),0) + 6}\nG1 Z1 F600\n +thumbnails = 160x160/PNG, 112x112/PNG + +[printer:Q1 Pro 0.2 nozzle] +inherits = *Q1 Pro* +default_filament_profile = Generic PLA @Q1 Pro 0.2 nozzle +default_print_profile = 0.12mm Fine @Q1 Pro 0.2 nozzle +max_layer_height = 0.14 +min_layer_height = 0.04 +nozzle_diameter = 0.2 +printer_variant = 0.2 +retract_length = 0.4 + +[printer:Q1 Pro 0.4 nozzle] +inherits = *Q1 Pro* +default_filament_profile = Generic PLA @Q1 Pro 0.4 nozzle +default_print_profile = 0.20mm Fine @Q1 Pro 0.4 nozzle +retract_length = 0.8 + +[printer:Q1 Pro 0.6 nozzle] +inherits = *Q1 Pro* +default_filament_profile = Generic PLA @Q1 Pro 0.6 nozzle +default_print_profile = 0.30mm Fine @Q1 Pro 0.6 nozzle +max_layer_height = 0.42 +min_layer_height = 0.12 +nozzle_diameter = 0.6 +printer_variant = 0.6 +retract_before_travel = 3 +retract_length = 1.4 + +[printer:Q1 Pro 0.8 nozzle] +inherits = *Q1 Pro* +default_filament_profile = Generic PLA @Q1 Pro 0.8 nozzle +default_print_profile = 0.40mm Fine @Q1 Pro 0.8 nozzle +max_layer_height = 0.56 +min_layer_height = 0.16 +nozzle_diameter = 0.8 +printer_variant = 0.8 +retract_length = 3 + # X-MAX 3 preset [printer:*X-MAX 3*] inherits = *common* diff --git a/resources/profiles/QIDITechnology/Q1 Pro.svg b/resources/profiles/QIDITechnology/Q1 Pro.svg new file mode 100644 index 0000000..93ac9a4 --- /dev/null +++ b/resources/profiles/QIDITechnology/Q1 Pro.svg @@ -0,0 +1,60 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/resources/profiles/QIDITechnology/Q1 Pro_bed.STL b/resources/profiles/QIDITechnology/Q1 Pro_bed.STL new file mode 100644 index 0000000..075f3bc Binary files /dev/null and b/resources/profiles/QIDITechnology/Q1 Pro_bed.STL differ diff --git a/resources/profiles/QIDITechnology/Q1 Pro_thumbnail.png b/resources/profiles/QIDITechnology/Q1 Pro_thumbnail.png new file mode 100644 index 0000000..2f47cf0 Binary files /dev/null and b/resources/profiles/QIDITechnology/Q1 Pro_thumbnail.png differ diff --git a/resources/web/guide/img/Q1 Pro.png b/resources/web/guide/img/Q1 Pro.png new file mode 100644 index 0000000..2b06018 Binary files /dev/null and b/resources/web/guide/img/Q1 Pro.png differ diff --git a/resources/web/guide/img/Q1 ProPoster.png b/resources/web/guide/img/Q1 ProPoster.png new file mode 100644 index 0000000..d80ab44 Binary files /dev/null and b/resources/web/guide/img/Q1 ProPoster.png differ diff --git a/resources/web/guide/index.html b/resources/web/guide/index.html index cd97a3a..5646fcb 100644 --- a/resources/web/guide/index.html +++ b/resources/web/guide/index.html @@ -83,6 +83,10 @@
+
  • +
    +
    +
    • @@ -93,6 +97,10 @@
      +
    1. +
      +
      Q1 Pro
      +
    2. X-MAX 3
      @@ -174,6 +182,10 @@
      +
      +
      +
      +
      @@ -294,6 +306,20 @@
      +
      +
      +
      +
      +
      +
      +
      + +
      +
      +
      +
      https://qidi3d.com
      +
      +
      @@ -526,6 +552,22 @@ 2200 ± 200 7.5 ± 1.5 + + PLA-CF + ≤30％ + / + + + + + ++ + 55.2℃ + 52.6℃ + 54.92 ± 0.22 + 4020.55 ± 99.11 + 4.90 ± 0.97 + 91.57 ± 0.31 + 4197.66 ± 279.96 + 6.65 ± 0.38 + UltraPA ≤15％ @@ -554,6 +596,14 @@
      +
      +
      +
      Q1 Pro
      +
      + E-mail:
      Q1support@qidi3d.com
      Q1AMS@qidi3d.com

      + Skype:
      Q1support@qidi3d.com +
      +
      X-MAX 3