optimization parameters

2026-01-30 23:48:44 +03:00 · 2023-06-19 09:45:54 +08:00
parent a35e39ccd3
commit 6b64e30f8d
3 changed files with 51 additions and 19 deletions
--- a/resources/profiles/QIDITechnology.ini
+++ b/resources/profiles/QIDITechnology.ini
@@ -268,7 +268,7 @@ solid_infill_speed = 230

 # Common filament preset
 [filament:*common*]
-advance_pressure = 0.032
+advance_pressure = 0.031
 bed_temperature = 60
 bridge_fan_speed = 100
 compatible_printers = 
@@ -341,6 +341,7 @@ volume_temperature = 0
 # QIDI filament preset
 [filament:*QIDI ABS Rapido*]
 inherits = *common*
+advance_pressure = 0.021
 bed_temperature = 100
 enable_auxiliary_fan = 0
 enable_volume_fan = 0
@@ -350,7 +351,7 @@ filament_density = 1.02
 filament_max_volumetric_speed = 22
 filament_type = ABS
 first_layer_bed_temperature = 100
-first_layer_temperature = 270
+first_layer_temperature = 255
 max_fan_speed = 60
 min_fan_speed = 60
 temperature = 270
@@ -358,13 +359,15 @@ volume_temperature = 55

 [filament:*QIDI ABS-GF*]
 inherits = *common*
+advance_pressure = 0.01
 bed_temperature = 100
+bridge_fan_speed = 0
 enable_auxiliary_fan = 0
 enable_volume_fan = 0
 extrusion_multiplier = 0.95
 filament_colour = #282828
 filament_density = 1.15
-filament_max_volumetric_speed = 16
+filament_max_volumetric_speed = 13
 filament_type = ABS-GF
 first_layer_bed_temperature = 100
 first_layer_temperature = 270
@@ -375,12 +378,14 @@ volume_temperature = 55

 [filament:*QIDI PA12-CF*]
 inherits = *common*
+advance_pressure = 0.01
 bed_temperature = 80
+bridge_fan_speed = 0
 enable_auxiliary_fan = 0
 extrusion_multiplier = 0.96
 filament_colour = #696969
 filament_density = 1.09
-filament_max_volumetric_speed = 16
+filament_max_volumetric_speed = 8.5
 filament_type = PA12-CF
 first_layer_bed_temperature = 80
 first_layer_temperature = 290
@@ -390,12 +395,14 @@ temperature = 290

 [filament:*QIDI PAHT-CF*]
 inherits = *common*
+advance_pressure = 0.01
 bed_temperature = 80
+bridge_fan_speed = 0
 enable_auxiliary_fan = 0
 extrusion_multiplier = 0.96
 filament_colour = #4F4F4F
 filament_density = 1.20
-filament_max_volumetric_speed = 16
+filament_max_volumetric_speed = 10
 filament_type = PAHT-CF
 first_layer_bed_temperature = 80
 first_layer_temperature = 310
@@ -405,12 +412,14 @@ temperature = 310

 [filament:*QIDI PET-CF*]
 inherits = *common*
+advance_pressure = 0.01
 bed_temperature = 80
+bridge_fan_speed = 5
 enable_auxiliary_fan = 0
 extrusion_multiplier = 1
 filament_colour = #323232
 filament_density = 1.30
-filament_max_volumetric_speed = 16
+filament_max_volumetric_speed = 13
 filament_type = PET-CF
 first_layer_bed_temperature = 80
 first_layer_temperature = 320
@@ -420,12 +429,14 @@ temperature = 320

 [filament:*QIDI PETG-Tough*]
 inherits = *common*
+advance_pressure = 0.07
 bed_temperature = 80
+bridge_fan_speed = 60
 enable_auxiliary_fan = 0
 extrusion_multiplier = 0.95
 filament_colour = #00FF40
 filament_density = 1.24
-filament_max_volumetric_speed = 15
+filament_max_volumetric_speed = 17
 filament_type = PETG
 first_layer_bed_temperature = 80
 first_layer_temperature = 250
@@ -444,45 +455,49 @@ filament_max_volumetric_speed = 22

 [filament:*QIDI UltraPA*]
 inherits = *common*
+advance_pressure = 0.03
 bed_temperature = 80
+bridge_fan_speed = 0
 enable_auxiliary_fan = 0
 extrusion_multiplier = 0.96
 filament_colour = #FFEBCD
 filament_density = 1.21
-filament_max_volumetric_speed = 6.5
+filament_max_volumetric_speed = 3.5
 filament_type = UltraPA
 first_layer_bed_temperature = 80
-first_layer_temperature = 280
+first_layer_temperature = 300
 max_fan_speed = 20
 min_fan_speed = 20
-temperature = 280
+temperature = 300

 # Generic filament preset
 [filament:*Generic ABS*]
 inherits = *common*
+advance_pressure = 0.021
 bed_temperature = 100
 enable_auxiliary_fan = 0
 enable_volume_fan = 0
 extrusion_multiplier = 0.95
 filament_colour = #FFFF00
 filament_density = 1.04
-filament_max_volumetric_speed = 16
+filament_max_volumetric_speed = 17.5
 filament_type = ABS
 filament_vendor = Generic
 first_layer_bed_temperature = 100
-first_layer_temperature = 260
+first_layer_temperature = 250
 max_fan_speed = 60
 min_fan_speed = 60
 temperature = 260

 [filament:*Generic PETG*]
 inherits = *common*
+advance_pressure = 0.07
 bed_temperature = 80
 enable_auxiliary_fan = 0
 extrusion_multiplier = 0.95
 filament_colour = #00FF00
 filament_density = 1.27
-filament_max_volumetric_speed = 10
+filament_max_volumetric_speed = 9
 filament_type = PETG
 filament_vendor = Generic
 first_layer_bed_temperature = 80
@@ -495,15 +510,16 @@ temperature = 250
 inherits = *common*
 filament_colour = #0000FF
 filament_density = 1.20
-filament_max_volumetric_speed = 12
+filament_max_volumetric_speed = 17
 filament_vendor = Generic

 [filament:*Generic TPU 95A*]
 inherits = *common*
+advance_pressure = 0.1
 extrusion_multiplier = 1
 filament_colour = #8000FF
 filament_density = 1.21
-filament_max_volumetric_speed = 3.2
+filament_max_volumetric_speed = 6
 filament_type = TPU
 filament_vendor = Generic
 first_layer_temperature = 230
@@ -621,11 +637,13 @@ compatible_printers_condition = printer_model=="X-Plus 3"
 [filament:QIDI ABS Rapido @X-smart 3]
 inherits = *QIDI ABS Rapido*
 compatible_printers_condition = printer_model=="X-smart 3"
+advance_pressure = 0.024
 filament_max_volumetric_speed = 20

 [filament:QIDI PETG-Tough @X-smart 3]
 inherits = *QIDI PETG-Tough*
 compatible_printers_condition = printer_model=="X-smart 3"
+advance_pressure = 0.048
 filament_max_volumetric_speed = 13

 [filament:QIDI PLA Rapido @X-smart 3]
@@ -644,11 +662,13 @@ slowdown_below_layer_time = 8
 [filament:Generic ABS @X-smart 3]
 inherits = *Generic ABS*
 compatible_printers_condition = printer_model=="X-smart 3"
+advance_pressure = 0.024
 filament_max_volumetric_speed = 14

 [filament:Generic PETG @X-smart 3]
 inherits = *Generic PETG*
 compatible_printers_condition = printer_model=="X-smart 3"
+advance_pressure = 0.048
 filament_max_volumetric_speed = 8

 [filament:Generic PLA @X-smart 3]
--- a/src/libslic3r/PrintConfig.cpp
+++ b/src/libslic3r/PrintConfig.cpp
@@ -1137,7 +1137,8 @@ void PrintConfigDef::init_fff_params()
    def->label = L("Filament type");
    def->tooltip = L("The filament material type for use in custom G-codes.");
    def->gui_flags = "show_value";
-    def->set_enum_values(ConfigOptionDef::GUIType::select_open, {
+    //Y
+    /*def->set_enum_values(ConfigOptionDef::GUIType::select_open, {
        "PLA", 
        "PET",
        "ABS",
@@ -1158,6 +1159,17 @@ void PrintConfigDef::init_fff_params()
        "PSU",
        "PVDF",
        "SCAFF"
+    });*/
+    def->set_enum_values(ConfigOptionDef::GUIType::select_open, {
+        "ABS", 
+        "ABS-GF",
+        "PA12-CF",
+        "PAHT-CF",
+        "PET-CF", 
+        "PETG",
+        "PLA",
+        "UltraPA",
+        "TPU"
    });
    def->mode = comAdvanced;
    def->set_default_value(new ConfigOptionStrings { "PLA" });
--- a/version.inc
+++ b/version.inc
@@ -3,7 +3,7 @@

 set(SLIC3R_APP_NAME "QIDISlicer")
 set(SLIC3R_APP_KEY "QIDISlicer")
-set(SLIC3R_VERSION "1.0.0")
+set(SLIC3R_VERSION "1.0.1")
 set(SLIC3R_BUILD_ID "QIDISlicer-${SLIC3R_VERSION}+Win64")
-set(SLIC3R_RC_VERSION "1,0,0,0")
-set(SLIC3R_RC_VERSION_DOTS "1.0.0.0")
+set(SLIC3R_RC_VERSION "1,0,1,0")
+set(SLIC3R_RC_VERSION_DOTS "1.0.1.0")