QIDITECH/QIDISlicer
1
0
Fork 0
mirror of https://github.com/QIDITECH/QIDISlicer.git synced 2026-01-30 23:48:44 +03:00
Code Issues Packages Projects Releases Wiki Activity

num_text

Browse Source
This commit is contained in:
sunsets
2023-09-15 19:25:28 +08:00
parent f2ea046ab5
commit 65a245af41
4 changed files with 141 additions and 45 deletions
Download Patch File Download Diff File Expand all files Collapse all files

94
src/slic3r/GUI/Plater.cpp
View File

@@ -2292,6 +2292,7 @@ Plater::priv::~priv()
void Plater::priv::update(unsigned int flags)
{
// the following line, when enabled, causes flickering on NVIDIA graphics cards
// wxWindowUpdateLocker freeze_guard(q);
if (get_config_bool("autocenter"))
@@ -5409,7 +5410,7 @@ void Plater::calib_flowrate_coarse()
std::string message = _u8L("NOTICE: The calibration function modifies some parameters. After calibration, record the best value and restore the other parameters.");
get_notification_manager()->push_notification(NotificationType::CustomNotification, NotificationManager::NotificationLevel::PrintInfoNotificationLevel, message);
}
//B34
void Plater::calib_flowrate_fine(const double target_extrusion_multiplier)
{
new_project();
@@ -5440,8 +5441,6 @@ void Plater::calib_flowrate_fine(const double target_extrusion_multiplier)
std::string message = _u8L("NOTICE: The calibration function modifies some parameters. After calibration, record the best value and restore the other parameters.");
get_notification_manager()->push_notification(NotificationType::CustomNotification, NotificationManager::NotificationLevel::PrintInfoNotificationLevel, message);
}
//B34
void Plater::calib_pa_line(const double StartPA, double EndPA, double PAStep)
{
@@ -5454,9 +5453,10 @@ void Plater::calib_pa_line(const double StartPA, double EndPA, double PAStep)
load_files(model_path, true, false, false);
// Check step count
double interval = 4.62;
const Vec2d plate_center = build_volume().bed_center();
double count = floor((EndPA - StartPA) / PAStep);
double max_count = floor(plate_center.y() / 2.5) - 2;
double max_count = floor(plate_center.y() / interval *2) - 2;
if (count > max_count) {
count = max_count;
}
@@ -5468,14 +5468,14 @@ void Plater::calib_pa_line(const double StartPA, double EndPA, double PAStep)
// Position aided model
sidebar().obj_manipul()->on_change("position", 0, plate_center.x() - 50);
sidebar().obj_manipul()->set_uniform_scaling(false);
sidebar().obj_manipul()->on_change("size", 1, count * 5);
sidebar().obj_manipul()->on_change("size", 1, count * interval);
double pa_first_layer_height = print_config->get_abs_value("first_layer_height");
sidebar().obj_manipul()->on_change("size", 2, pa_first_layer_height);
sidebar().obj_manipul()->set_uniform_scaling(true);
//B34 Get parameter
double start_x = plate_center.x() - 40;
double start_y = plate_center.y() - count * 2.5;
double start_y = plate_center.y() - count * interval / 2;
const double speed_fast = print_config->get_abs_value("external_perimeter_speed") * 60;
const double speed_slow = speed_fast * 0.8;
const double line_short = 20;
@@ -5504,48 +5504,32 @@ void Plater::calib_pa_line(const double StartPA, double EndPA, double PAStep)
const double e_step = print_config->get_abs_value("layer_height") * pa_external_perimeter_extrusion_width * 0.4;
//B34 Add Text
GLCanvas3D * canvas = wxGetApp().plater()->canvas3D();
GLGizmosManager &mng = canvas->get_gizmos_manager();
GLGizmoBase * gizmo = mng.get_gizmo(GLGizmosManager::Emboss);
GLGizmoEmboss * emboss = dynamic_cast<GLGizmoEmboss *>(gizmo);
assert(emboss != nullptr);
if (emboss == nullptr)
return;
ModelVolumeType volume_type = ModelVolumeType::MODEL_PART;
// no selected object means create new object
if (volume_type == ModelVolumeType::INVALID)
volume_type = ModelVolumeType::MODEL_PART;
emboss->create_volume(volume_type, Vec2d(plate_center.x() - 10, plate_center.y() - count * 2.5), "0.0");
//dynamic_cast<GLGizmoEmboss *>(mng.get_gizmo(GLGizmosManager::Emboss))
// ->create_volume(volume_type, Vec2d(plate_center.x() - 20, plate_center.y() - count * 2.5), "1.0");
//dynamic_cast<GLGizmoEmboss *>(mng.get_gizmo(GLGizmosManager::Emboss))
// ->create_volume(volume_type, Vec2d(plate_center.x() - 20, plate_center.y() - count * 2.5), "2.0");
//dynamic_cast<GLGizmoEmboss *>(mng.get_gizmo(GLGizmosManager::Emboss))
// ->create_volume(volume_type, Vec2d(plate_center.x() - 20, plate_center.y() - count * 2.5), "3.0");
//model().objects[0]->scale(2);
std::string num_str = double_to_str(StartPA + (count-1) * PAStep) ;
for (int i = 1; i < count/2; i++) {
num_str += "\n" + double_to_str(StartPA + (count - 1 - i * 2) * PAStep) ;
}
add_num_text(num_str, Vec2d(plate_center.x() - 50, plate_center.y()));
//add_num_text("2.0");
// add_num_text("1.0", Vec2d(100, 200));
//B34 Generate line gcode
std::stringstream gcode;
gcode << move_to(Vec2d(start_x + 80, start_y), pa_travel_speed);
gcode << move_to(pa_layer_height);
gcode << move_to(Vec2d(start_x + 80, start_y + count * 5), speed_fast, count * 5 * e_step);
gcode << move_to(Vec2d(start_x + 80, start_y + count * interval), speed_fast, count * interval * e_step);
for (int i = 0; i <= count; i++) {
gcode << set_pressure_advance(StartPA + i * PAStep);
gcode << move_to(Vec2d(start_x, start_y + i * 5), pa_travel_speed);
gcode << move_to(Vec2d(start_x + line_short, start_y + i * 5), speed_fast, line_short * e_step);
gcode << move_to(Vec2d(start_x + line_short + line_long, start_y + i * 5), speed_slow, line_long * e_step);
gcode << move_to(Vec2d(start_x + line_short + line_long + line_short, start_y + i * 5), speed_fast, line_short * e_step);
gcode << move_to(Vec2d(start_x, start_y + i * interval), pa_travel_speed);
gcode << move_to(Vec2d(start_x + line_short, start_y + i * interval), speed_fast, line_short * e_step);
gcode << move_to(Vec2d(start_x + line_short + line_long, start_y + i * interval), speed_slow, line_long * e_step);
gcode << move_to(Vec2d(start_x + line_short + line_long + line_short, start_y + i * interval), speed_fast, line_short * e_step);
}
gcode << set_pressure_advance(0);
gcode << move_to(Vec2d(start_x + line_short, start_y + count * 5 + 1), pa_travel_speed);
gcode << move_to(Vec2d(start_x + line_short, start_y + count * 5 + 3), speed_fast, 2 * e_step);
gcode << move_to(Vec2d(start_x + line_short + line_long, start_y + count * 5 + 1), pa_travel_speed);
gcode << move_to(Vec2d(start_x + line_short + line_long, start_y + count * 5 + 3), speed_fast, 2 * e_step);
gcode << move_to(Vec2d(start_x + line_short, start_y + count * interval + 1), pa_travel_speed);
gcode << move_to(Vec2d(start_x + line_short, start_y + count * interval + 3), speed_fast, 2 * e_step);
gcode << move_to(Vec2d(start_x + line_short + line_long, start_y + count * interval + 1), pa_travel_speed);
gcode << move_to(Vec2d(start_x + line_short + line_long, start_y + count * interval + 3), speed_fast, 2 * e_step);
// Set and load end gcode
auto pa_end_gcode = printer_config->opt_string("end_gcode");
@@ -5562,7 +5546,7 @@ void Plater::calib_pa_line(const double StartPA, double EndPA, double PAStep)
get_notification_manager()->push_notification(NotificationType::CustomNotification,
NotificationManager::NotificationLevel::PrintInfoNotificationLevel, message);
}
//B34
void Plater::calib_pa_pattern(const double StartPA, double EndPA, double PAStep)
{
new_project();
@@ -5607,11 +5591,11 @@ void Plater::calib_pa_pattern(const double StartPA, double EndPA, double PAStep)
pa_external_perimeter_extrusion_width = pa_extrusion_width * pa_external_perimeter_extrusion_width;
}
const double step_spacing = 5;
const double step_spacing = 4.62;
double line_spacing = pa_external_perimeter_extrusion_width - pa_layer_height * (1 - M_PI / 4);
const double m_wall_side_length{64.0};
double max_count = floor(plate_center.y() - line_spacing - m_wall_side_length / (2 * step_spacing)) - 3;
double max_count = floor((plate_center.y() * 2 - 2 * line_spacing - m_wall_side_length / 2) / step_spacing) - 3;
if (count > max_count) {
count = max_count;
}
@@ -5635,6 +5619,15 @@ void Plater::calib_pa_pattern(const double StartPA, double EndPA, double PAStep)
std::stringstream gcode;
gcode << move_to(pa_layer_height);
//B34 Add Num
std::string num_str = double_to_str(StartPA + 1 * PAStep);
for (int i = 1; i < count / 2; i++) {
num_str += "\n" + double_to_str(StartPA + (1 + i * 2) * PAStep);
}
add_num_text(num_str, Vec2d(plate_center.x() - 50, plate_center.y() + m_wall_side_length / 4));
// Draw Box
for (int i = 0; i < 3; i++) {
gcode << move_to(Vec2d(start_x + i * line_spacing, start_y - i * line_spacing), pa_travel_speed);
@@ -5713,7 +5706,6 @@ void Plater::calib_pa_tower(const double StartPA, double EndPA, double PAStep)
std::string message = _u8L("NOTICE: The calibration function modifies some parameters. After calibration, record the best value and restore the other parameters.");
get_notification_manager()->push_notification(NotificationType::CustomNotification, NotificationManager::NotificationLevel::PrintInfoNotificationLevel, message);
}
//B34
std::string Plater::move_to(const Vec2d &point, double speed)
{
@@ -5743,6 +5735,24 @@ std::string Plater::set_pressure_advance(double pa)
return gcode.str();
}
void Plater::add_num_text(std::string num, Vec2d posotion)
{
GLCanvas3D * canvas = wxGetApp().plater()->canvas3D();
GLGizmosManager &mng = canvas->get_gizmos_manager();
GLGizmoBase * gizmo = mng.get_gizmo(GLGizmosManager::Emboss);
GLGizmoEmboss * emboss = dynamic_cast<GLGizmoEmboss *>(gizmo);
assert(emboss != nullptr);
if (emboss == nullptr)
return;
ModelVolumeType volume_type = ModelVolumeType::MODEL_PART;
// no selected object means create new object
if (volume_type == ModelVolumeType::INVALID)
volume_type = ModelVolumeType::MODEL_PART;
emboss->create_volume(volume_type, posotion, num);
}