From 428388b804c1229167d98f5073d10b3567f37e00 Mon Sep 17 00:00:00 2001
From: QIDI TECH <893239786@qq.com>
Date: Sat, 27 Jan 2024 13:15:01 +0800
Subject: [PATCH] Update QIDITechnology.ini

---
 resources/profiles/QIDITechnology.ini | 22 +++++-----------------
 1 file changed, 5 insertions(+), 17 deletions(-)

diff --git a/resources/profiles/QIDITechnology.ini b/resources/profiles/QIDITechnology.ini
index 9629a3c..e508be9 100644
--- a/resources/profiles/QIDITechnology.ini
+++ b/resources/profiles/QIDITechnology.ini
@@ -145,6 +145,7 @@ raft_first_layer_density = 90%
 raft_first_layer_expansion = 3
 raft_layers = 0
 resolution = 0
+seam_gap = 15
 seam_position = aligned
 single_extruder_multi_material_priming = 1
 skirt_distance = 6
@@ -197,8 +198,10 @@ support_tree_tip_diameter = 0.8
 support_tree_top_rate = 15%
 thick_bridges = 0
 thin_walls = 0
+top_area_threshold = 100
 top_fill_pattern = monotoniclines
 top_infill_extrusion_width = 0.42
+top_one_wall_type = all_top
 top_solid_infill_acceleration = 2000
 top_solid_infill_speed = 200
 top_solid_layers = 5
@@ -223,7 +226,6 @@ wipe_tower_x = 180
 wipe_tower_y = 140
 xy_size_compensation = 0
 
-# Machine Print preset
 [print:*X-MAX 3*]
 inherits = *common*
 
@@ -565,9 +567,9 @@ compatible_prints =
 compatible_prints_condition = 
 cooling = 1
 disable_fan_first_layers = 1
-disable_rapid_cooling_fan_first_layers = 15
+disable_rapid_cooling_fan_first_layers = 3
 enable_advance_pressure = 1
-enable_auxiliary_fan = 100
+enable_auxiliary_fan = 0
 enable_dynamic_fan_speeds = 0
 enable_volume_fan = 100
 end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
@@ -632,7 +634,6 @@ inherits = *common*
 advance_pressure = 0.021
 bed_temperature = 90
 disable_fan_first_layers = 3
-enable_auxiliary_fan = 0
 enable_dynamic_fan_speeds = 1
 enable_volume_fan = 0
 extrusion_multiplier = 0.92
@@ -655,7 +656,6 @@ inherits = *common*
 advance_pressure = 0.021
 bed_temperature = 90
 disable_fan_first_layers = 3
-enable_auxiliary_fan = 0
 enable_dynamic_fan_speeds = 1
 enable_volume_fan = 0
 extrusion_multiplier = 0.95
@@ -678,7 +678,6 @@ inherits = *common*
 advance_pressure = 0.01
 bed_temperature = 100
 disable_fan_first_layers = 3
-enable_auxiliary_fan = 0
 enable_volume_fan = 0
 enable_dynamic_fan_speeds = 1
 extrusion_multiplier = 0.95
@@ -701,7 +700,6 @@ inherits = *common*
 advance_pressure = 0.021
 bed_temperature = 90
 disable_fan_first_layers = 3
-enable_auxiliary_fan = 0
 enable_dynamic_fan_speeds = 1
 enable_volume_fan = 0
 extrusion_multiplier = 0.92
@@ -726,7 +724,6 @@ inherits = *common*
 advance_pressure = 0.021
 bed_temperature = 90
 disable_fan_first_layers = 3
-enable_auxiliary_fan = 0
 enable_dynamic_fan_speeds = 1
 enable_volume_fan = 0
 extrusion_multiplier = 0.7
@@ -757,7 +754,6 @@ advance_pressure = 0.01
 bed_temperature = 80
 bridge_fan_speed = 50
 disable_fan_first_layers = 3
-enable_auxiliary_fan = 0
 enable_dynamic_fan_speeds = 1
 extrusion_multiplier = 0.96
 fan_below_layer_time = 10
@@ -782,7 +778,6 @@ advance_pressure = 0.01
 bed_temperature = 80
 bridge_fan_speed = 50
 disable_fan_first_layers = 3
-enable_auxiliary_fan = 0
 extrusion_multiplier = 0.96
 fan_below_layer_time = 10
 filament_colour = #4F4F4F
@@ -803,7 +798,6 @@ advance_pressure = 0.04
 bed_temperature = 100
 bridge_fan_speed = 60
 disable_fan_first_layers = 3
-enable_auxiliary_fan = 0
 enable_dynamic_fan_speeds = 1
 enable_volume_fan = 0
 extrusion_multiplier = 0.92
@@ -828,7 +822,6 @@ advance_pressure = 0.01
 bed_temperature = 80
 bridge_fan_speed = 50
 disable_fan_first_layers = 3
-enable_auxiliary_fan = 0
 enable_dynamic_fan_speeds = 1
 extrusion_multiplier = 1
 fan_below_layer_time = 10
@@ -852,7 +845,6 @@ inherits = *common*
 advance_pressure = 0.04
 bed_temperature = 80
 disable_fan_first_layers = 3
-enable_auxiliary_fan = 0
 enable_dynamic_fan_speeds = 1
 extrusion_multiplier = 0.95
 fan_below_layer_time = 30
@@ -883,7 +875,6 @@ inherits = *common*
 advance_pressure = 0.03
 bed_temperature = 80
 bridge_fan_speed = 50
-enable_auxiliary_fan = 0
 extrusion_multiplier = 0.96
 filament_colour = #FFEBCD
 filament_density = 1.21
@@ -902,7 +893,6 @@ inherits = *common*
 advance_pressure = 0.021
 bed_temperature = 90
 disable_fan_first_layers = 3
-enable_auxiliary_fan = 0
 enable_dynamic_fan_speeds = 1
 enable_volume_fan = 0
 extrusion_multiplier = 0.95
@@ -926,7 +916,6 @@ inherits = *common*
 advance_pressure = 0.04
 bed_temperature = 80
 disable_fan_first_layers = 3
-enable_auxiliary_fan = 0
 enable_dynamic_fan_speeds = 1
 extrusion_multiplier = 0.95
 fan_below_layer_time = 30
@@ -954,7 +943,6 @@ filament_vendor = Generic
 [filament:*Generic TPU 95A*]
 inherits = *common*
 advance_pressure = 0.1
-enable_auxiliary_fan = 0
 extrusion_multiplier = 1
 filament_colour = #8000FF
 filament_density = 1.21