diff --git a/resources/profiles/QIDITechnology.ini b/resources/profiles/QIDITechnology.ini
index 44174a5..e5eeada 100644
--- a/resources/profiles/QIDITechnology.ini
+++ b/resources/profiles/QIDITechnology.ini
@@ -249,8 +249,6 @@ xy_hole_compensation = 0
 # Machine Print preset
 [print:*Q1 Pro*]
 inherits = *common*
-external_perimeter_acceleration = 5000
-perimeter_acceleration = 7000
 
 [print:*X-MAX 3*]
 inherits = *common*
@@ -651,7 +649,8 @@ cooling = 1
 disable_fan_first_layers = 1
 disable_rapid_cooling_fan_first_layers = 3
 enable_advance_pressure = 1
-enable_auxiliary_fan = 0
+enable_auxiliary_fan = 100
+enable_auxiliary_fan_unseal = 0
 enable_dynamic_fan_speeds = 0
 enable_volume_fan = 100
 end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
@@ -715,7 +714,8 @@ overhang_fan_speed_0 = 0
 overhang_fan_speed_1 = 0
 overhang_fan_speed_2 = 0
 overhang_fan_speed_3 = 0
-slowdown_below_layer_time = 8
+seal_print = 1
+slowdown_below_layer_time = 5
 smooth_time = 0.03
 start_filament_gcode = "; Filament gcode\n{if (enable_advance_pressure[0] == true)}M900 K[advance_pressure]{else}M900 K0{endif} T[smooth_time]\n"
 temperature = 220
@@ -727,6 +727,7 @@ inherits = *common*
 advance_pressure = 0.021
 bed_temperature = 90
 disable_fan_first_layers = 3
+enable_auxiliary_fan = 0
 enable_dynamic_fan_speeds = 1
 enable_volume_fan = 0
 extrusion_multiplier = 0.92
@@ -749,6 +750,7 @@ inherits = *common*
 advance_pressure = 0.021
 bed_temperature = 90
 disable_fan_first_layers = 3
+enable_auxiliary_fan = 0
 enable_dynamic_fan_speeds = 1
 enable_volume_fan = 0
 extrusion_multiplier = 0.95
@@ -771,8 +773,9 @@ inherits = *common*
 advance_pressure = 0.01
 bed_temperature = 100
 disable_fan_first_layers = 3
-enable_volume_fan = 0
+enable_auxiliary_fan = 0
 enable_dynamic_fan_speeds = 1
+enable_volume_fan = 0
 extrusion_multiplier = 0.95
 filament_colour = #282828
 filament_density = 1.15
@@ -784,7 +787,6 @@ max_fan_speed = 20
 min_fan_speed = 20
 overhang_fan_speed_0 = 100
 overhang_fan_speed_1 = 100
-slowdown_below_layer_time = 5
 temperature = 270
 volume_temperature = 55
 
@@ -794,6 +796,7 @@ inherits = *common*
 advance_pressure = 0.021
 bed_temperature = 90
 disable_fan_first_layers = 3
+enable_auxiliary_fan = 0
 enable_dynamic_fan_speeds = 1
 enable_volume_fan = 0
 extrusion_multiplier = 0.92
@@ -818,6 +821,7 @@ inherits = *common*
 advance_pressure = 0.021
 bed_temperature = 90
 disable_fan_first_layers = 3
+enable_auxiliary_fan = 0
 enable_dynamic_fan_speeds = 1
 enable_volume_fan = 0
 extrusion_multiplier = 0.7
@@ -848,6 +852,7 @@ advance_pressure = 0.01
 bed_temperature = 80
 bridge_fan_speed = 50
 disable_fan_first_layers = 3
+enable_auxiliary_fan = 0
 enable_dynamic_fan_speeds = 1
 extrusion_multiplier = 0.96
 fan_below_layer_time = 10
@@ -863,7 +868,6 @@ overhang_fan_speed_0 = 100
 overhang_fan_speed_1 = 100
 overhang_fan_speed_2 = 100
 overhang_fan_speed_3 = 100
-slowdown_below_layer_time = 5
 temperature = 290
 
 [filament:*QIDI PAHT-CF*]
@@ -872,6 +876,7 @@ advance_pressure = 0.01
 bed_temperature = 80
 bridge_fan_speed = 50
 disable_fan_first_layers = 3
+enable_auxiliary_fan = 0
 extrusion_multiplier = 0.96
 fan_below_layer_time = 10
 filament_colour = #4F4F4F
@@ -882,7 +887,6 @@ first_layer_bed_temperature = 80
 first_layer_temperature = 310
 max_fan_speed = 40
 min_fan_speed = 20
-slowdown_below_layer_time = 5
 temperature = 310
 
 # QIDI filament preset
@@ -892,6 +896,7 @@ advance_pressure = 0.04
 bed_temperature = 100
 bridge_fan_speed = 60
 disable_fan_first_layers = 3
+enable_auxiliary_fan = 0
 enable_dynamic_fan_speeds = 1
 enable_volume_fan = 0
 extrusion_multiplier = 0.92
@@ -916,6 +921,7 @@ advance_pressure = 0.01
 bed_temperature = 80
 bridge_fan_speed = 50
 disable_fan_first_layers = 3
+enable_auxiliary_fan = 0
 enable_dynamic_fan_speeds = 1
 extrusion_multiplier = 1
 fan_below_layer_time = 10
@@ -931,7 +937,6 @@ overhang_fan_speed_0 = 100
 overhang_fan_speed_1 = 100
 overhang_fan_speed_2 = 100
 overhang_fan_speed_3 = 100
-slowdown_below_layer_time = 5
 temperature = 320
 
 [filament:*QIDI PETG-Tough*]
@@ -939,6 +944,7 @@ inherits = *common*
 advance_pressure = 0.04
 bed_temperature = 80
 disable_fan_first_layers = 3
+enable_auxiliary_fan = 0
 enable_dynamic_fan_speeds = 1
 extrusion_multiplier = 0.95
 fan_below_layer_time = 30
@@ -952,6 +958,7 @@ max_fan_speed = 40
 min_fan_speed = 10
 overhang_fan_speed_0 = 100
 overhang_fan_speed_1 = 100
+slowdown_below_layer_time = 8
 temperature = 250
 
 [filament:*QIDI PLA Rapido*]
@@ -979,6 +986,7 @@ inherits = *common*
 advance_pressure = 0.03
 bed_temperature = 80
 bridge_fan_speed = 50
+enable_auxiliary_fan = 0
 extrusion_multiplier = 0.96
 filament_colour = #FFEBCD
 filament_density = 1.21
@@ -997,6 +1005,7 @@ inherits = *common*
 advance_pressure = 0.021
 bed_temperature = 90
 disable_fan_first_layers = 3
+enable_auxiliary_fan = 0
 enable_dynamic_fan_speeds = 1
 enable_volume_fan = 0
 extrusion_multiplier = 0.95
@@ -1020,6 +1029,7 @@ inherits = *common*
 advance_pressure = 0.04
 bed_temperature = 80
 disable_fan_first_layers = 3
+enable_auxiliary_fan = 0
 enable_dynamic_fan_speeds = 1
 extrusion_multiplier = 0.95
 fan_below_layer_time = 30
@@ -1043,6 +1053,7 @@ filament_colour = #0000FF
 filament_density = 1.20
 filament_max_volumetric_speed = 14
 filament_vendor = Generic
+slowdown_below_layer_time = 8
 
 [filament:*Generic PLA Silk*]
 inherits = *common*
@@ -1055,10 +1066,12 @@ filament_retract_length = 0.5
 filament_vendor = Generic
 first_layer_bed_temperature = 55
 first_layer_temperature = 220
+slowdown_below_layer_time = 8
 
 [filament:*Generic TPU 95A*]
 inherits = *common*
 advance_pressure = 0.1
+enable_auxiliary_fan = 0
 extrusion_multiplier = 1
 filament_colour = #8000FF
 filament_density = 1.21
@@ -1066,6 +1079,7 @@ filament_max_volumetric_speed = 4
 filament_type = TPU
 filament_vendor = Generic
 first_layer_temperature = 230
+slowdown_below_layer_time = 8
 temperature = 230
 
 # Q1 Pro 0.2 nozzle QIDI filament preset
@@ -2151,11 +2165,13 @@ compatible_printers_condition = printer_model=="X-smart 3" and nozzle_diameter[0
 [filament:QIDI PLA Rapido @X-smart 3 0.2 nozzle]
 inherits = *QIDI PLA Rapido*
 filament_max_volumetric_speed = 2
+slowdown_below_layer_time = 8
 compatible_printers_condition = printer_model=="X-smart 3" and nozzle_diameter[0]==0.2
 
 [filament:QIDI PLA Rapido Matte @X-smart 3 0.2 nozzle]
 inherits = *QIDI PLA Rapido Matte*
 filament_max_volumetric_speed = 2
+slowdown_below_layer_time = 8
 compatible_printers_condition = printer_model=="X-smart 3" and nozzle_diameter[0]==0.2
 
 # X-smart 3 0.2 nozzle Generic filament preset
@@ -2232,15 +2248,18 @@ compatible_printers_condition = printer_model=="X-smart 3" and nozzle_diameter[0
 [filament:QIDI PLA Rapido @X-smart 3 0.4 nozzle]
 inherits = *QIDI PLA Rapido*
 filament_max_volumetric_speed = 19
+slowdown_below_layer_time = 8
 compatible_printers_condition = printer_model=="X-smart 3" and nozzle_diameter[0]==0.4
 
 [filament:QIDI PLA Rapido Matte @X-smart 3 0.4 nozzle]
 inherits = *QIDI PLA Rapido Matte*
 filament_max_volumetric_speed = 20
+slowdown_below_layer_time = 8
 compatible_printers_condition = printer_model=="X-smart 3" and nozzle_diameter[0]==0.4
 
 [filament:QIDI PLA-CF @X-smart 3 0.4 nozzle]
 inherits = *QIDI PLA-CF*
+slowdown_below_layer_time = 8
 compatible_printers_condition = printer_model=="X-smart 3" and nozzle_diameter[0]==0.4
 
 [filament:QIDI UltraPA @X-smart 3 0.4 nozzle]
@@ -2321,16 +2340,19 @@ compatible_printers_condition = printer_model=="X-smart 3" and nozzle_diameter[0
 [filament:QIDI PLA Rapido @X-smart 3 0.6 nozzle]
 inherits = *QIDI PLA Rapido*
 advance_pressure = 0.016
+slowdown_below_layer_time = 8
 compatible_printers_condition = printer_model=="X-smart 3" and nozzle_diameter[0]==0.6
 
 [filament:QIDI PLA Rapido Matte @X-smart 3 0.6 nozzle]
 inherits = *QIDI PLA Rapido Matte*
 advance_pressure = 0.016
+slowdown_below_layer_time = 8
 compatible_printers_condition = printer_model=="X-smart 3" and nozzle_diameter[0]==0.6
 
 [filament:QIDI PLA-CF @X-smart 3 0.6 nozzle]
 inherits = *QIDI PLA-CF*
 advance_pressure = 0.01
+slowdown_below_layer_time = 8
 compatible_printers_condition = printer_model=="X-smart 3" and nozzle_diameter[0]==0.6
 
 [filament:QIDI UltraPA @X-smart 3 0.6 nozzle]
@@ -2417,17 +2439,20 @@ compatible_printers_condition = printer_model=="X-smart 3" and nozzle_diameter[0
 [filament:QIDI PLA Rapido @X-smart 3 0.8 nozzle]
 inherits = *QIDI PLA Rapido*
 advance_pressure = 0.008
+slowdown_below_layer_time = 8
 compatible_printers_condition = printer_model=="X-smart 3" and nozzle_diameter[0]==0.8
 
 [filament:QIDI PLA Rapido Matte @X-smart 3 0.8 nozzle]
 inherits = *QIDI PLA Rapido Matte*
 advance_pressure = 0.008
+slowdown_below_layer_time = 8
 compatible_printers_condition = printer_model=="X-smart 3" and nozzle_diameter[0]==0.8
 
 [filament:QIDI PLA-CF @X-smart 3 0.8 nozzle]
 inherits = *QIDI PLA-CF*
 advance_pressure = 0.008
 filament_max_volumetric_speed = 18
+slowdown_below_layer_time = 8
 compatible_printers_condition = printer_model=="X-smart 3" and nozzle_diameter[0]==0.8
 
 [filament:QIDI UltraPA @X-smart 3 0.8 nozzle]