QIDITECH/QIDISlicer
1
0
Fork 0
mirror of https://github.com/QIDITECH/QIDISlicer.git synced 2026-02-02 00:48:43 +03:00
Code Issues Packages Projects Releases Wiki Activity

add mix_wall revert infill_overlap

Browse Source
This commit is contained in:
Wang YB
2024-02-27 13:51:25 +08:00
parent 2046b2f21f
commit 04b1c22cc6
3 changed files with 18 additions and 8 deletions
Download Patch File Download Diff File Expand all files Collapse all files

14
src/libslic3r/Fill/Fill.cpp
View File

@@ -549,7 +549,11 @@ void Layer::make_fills(FillAdaptive::Octree* adaptive_fill_octree, FillAdaptive:
params.anchor_length_max = surface_fill.params.anchor_length_max;
params.resolution = resolution;
//w14
params.use_arachne = (perimeter_generator == PerimeterGeneratorType::Arachne && surface_fill.params.pattern == ipConcentricInternal) || surface_fill.params.pattern == ipEnsuring;
//w20
if (perimeter_generator == PerimeterGeneratorType::Mix_wall)
params.use_arachne = (perimeter_generator == PerimeterGeneratorType::Arachne && surface_fill.params.pattern == ipConcentricInternal) || surface_fill.params.pattern == ipEnsuring || surface_fill.params.pattern == ipConcentricInternal;
else
params.use_arachne = (perimeter_generator == PerimeterGeneratorType::Arachne && surface_fill.params.pattern == ipConcentricInternal) || surface_fill.params.pattern == ipEnsuring ;
params.layer_height = layerm.layer()->height;
for (ExPolygon &expoly : surface_fill.expolygons) {
@@ -561,25 +565,25 @@ void Layer::make_fills(FillAdaptive::Octree* adaptive_fill_octree, FillAdaptive:
try {
if (params.use_arachne) {
//w14
if (surface_fill.params.pattern == ipConcentricInternal) {
/* if (surface_fill.params.pattern == ipConcentricInternal) {
layerm.region().config().infill_overlap.percent ?
f->overlap = layerm.region().config().perimeter_extrusion_width * layerm.region().config().infill_overlap.value / 100 *(-1):
f->overlap = float(layerm.region().config().infill_overlap.value);
} else
f->overlap = 0;
f->overlap = 0;*/
thick_polylines = f->fill_surface_arachne(&surface_fill.surface, params);
}
//w14
else {
if (surface_fill.params.pattern == ipConcentricInternal) {
/* if (surface_fill.params.pattern == ipConcentricInternal) {
layerm.region().config().infill_overlap.percent ?
f->overlap = layerm.region().config().perimeter_extrusion_width *
layerm.region().config().infill_overlap.value / 100 * (-1) :
f->overlap = float(layerm.region().config().infill_overlap.value);
} else
f->overlap = 0;
f->overlap = 0;*/
polylines = f->fill_surface(&surface_fill.surface, params);
}
} catch (InfillFailedException &) {