QIDISlicer/resources/profiles/QIDITechnology.ini

# Print profiles for QIDI Technology printers.

[vendor]
# Vendor name will be shown by the Config Wizard.
name = QIDI Technology
# Configuration version of this file. Config file will only be installed, if the config_version differs.
# This means, the server may force the PrusaSlicer configuration to be downgraded.
config_version = 1.0.1
# Where to get the updates from?
config_update_url = https://github.com/QIDITECH/QIDISlicer/releases/download/QIDITechnology/
changelog_url = https://qidi3d.com/pages/software-firmware

# The printer models will be shown by the Configuration Wizard in this order,
# also the first model installed & the first nozzle installed will be activated after install.
# Printer model name will be shown by the installation wizard.

[printer_model:X-MAX 3]
name = X-MAX 3
variants = 0.4
technology = FFF
family = X
bed_model = X-MAX 3_bed.stl
bed_texture = X-MAX 3.svg
default_materials = QIDI ABS Rapido @X-MAX 3; QIDI PLA Rapido @X-MAX 3; QIDI PLA Rapido Matte @X-MAX 3; QIDI ToughPETG @X-MAX 3; Generic ABS @X-MAX 3; Generic PETG @X-MAX 3; Generic PLA @X-MAX 3
email = MAX3support@qd3Dprinter.com; MAX3AMS@qd3Dprinter.com
skype = MAX3support@qd3Dprinter.com

[printer_model:X-Plus 3]
name = X-Plus 3
variants = 0.4
technology = FFF
family = X
bed_model = X-Plus 3_bed.stl
bed_texture = X-Plus 3.svg
default_materials = QIDI ABS Rapido @X-Plus 3; QIDI PLA Rapido @X-Plus 3; QIDI PLA Rapido Matte @X-Plus 3; QIDI ToughPETG @X-Plus 3; Generic ABS @X-Plus 3; Generic PETG @X-Plus 3; Generic PLA @X-Plus 3
email = Plus3support@qd3Dprinter.com; Plus3AMS@qd3Dprinter.com
skype = Plus3support@qd3Dprinter.com

[printer_model:X-smart 3]
name = X-smart 3
variants = 0.4
technology = FFF
family = X
bed_model = X-smart 3_bed.stl
bed_texture = X-smart 3.svg
default_materials = QIDI ABS Rapido @X-smart 3; QIDI PLA Rapido @X-smart 3; QIDI PLA Rapido Matte @X-smart 3; QIDI ToughPETG @X-smart 3; Generic ABS @X-smart 3; Generic PETG @X-smart 3; Generic PLA @X-smart 3
email = Smart3support@qd3dprinter.com; Smart3AMS@qd3dprinter.com
skype = Smart3AMS@qd3dprinter.com

# All presets starting with asterisk, for example *common*, are intermediate and they will
# not make it into the user interface.

# Common print presets
[print:*common*]
avoid_crossing_curled_overhangs = 0
avoid_crossing_perimeters = 0
avoid_crossing_perimeters_max_detour = 0
bottom_fill_pattern = monotonic
bottom_solid_layers = 3
bottom_solid_min_thickness = 0
bridge_acceleration = 2000
bridge_angle = 0
bridge_flow_ratio = 1
bridge_speed = 50
brim_separation = 0.1
brim_type = outer_only
brim_width = 0
compatible_printers = 
compatible_printers_condition = 
complete_objects = 0
default_acceleration = 10000
dont_support_bridges = 0
draft_shield = disabled
elefant_foot_compensation = 0.15
enable_dynamic_overhang_speeds = 1
external_perimeter_acceleration = 3000
external_perimeter_extrusion_width = 0
external_perimeter_speed = 200
external_perimeters_first = 0
extra_perimeters = 1
extra_perimeters_on_overhangs = 0
extruder_clearance_height = 20
extruder_clearance_radius = 20
extrusion_width = 0.42
fill_angle = 45
fill_density = 15%
fill_pattern = grid
first_layer_acceleration = 500
first_layer_acceleration_over_raft = 500
first_layer_extrusion_width = 0.5
first_layer_height = 0.2
first_layer_speed = 25%
first_layer_speed_over_raft = 30
fuzzy_skin = none
fuzzy_skin_point_dist = 0.8
fuzzy_skin_thickness = 0.3
gap_fill_enabled = 0
gap_fill_speed = 250
gcode_comments = 0
gcode_label_objects = 0
gcode_resolution = 0.0125
gcode_substitutions = 
infill_acceleration = 0
infill_anchor = 600%
infill_anchor_max = 50
infill_every_layers = 1
infill_extruder = 1
infill_extrusion_width = 0.45
infill_first = 0
infill_overlap = 15%
infill_speed = 270
inherits = 
interface_shells = 0
ironing = 0
ironing_flowrate = 15%
ironing_spacing = 0.1
ironing_speed = 30
ironing_type = top
layer_height = 0.2
max_print_speed = 600
max_volumetric_extrusion_rate_slope_negative = 0
max_volumetric_extrusion_rate_slope_positive = 0
max_volumetric_speed = 0
min_bead_width = 85%
min_feature_size = 25%
min_skirt_length = 5
mmu_segmented_region_max_width = 0
notes = 
only_retract_when_crossing_perimeters = 1
ooze_prevention = 0
output_filename_format = [input_filename_base].gcode
overhang_speed_0 = 20
overhang_speed_1 = 30
overhang_speed_2 = 50
overhang_speed_3 = 0
overhangs = 1
perimeter_acceleration = 5000
perimeter_extruder = 1
perimeter_extrusion_width = 0.45
perimeter_generator = arachne
perimeter_speed = 300
perimeters = 2
post_process = 
print_settings_id = 
raft_contact_distance = 0.1
raft_expansion = 1.5
raft_first_layer_density = 90%
raft_first_layer_expansion = 3
raft_layers = 0
resolution = 0
seam_position = aligned
single_extruder_multi_material_priming = 1
skirt_distance = 6
skirt_height = 1
skirts = 0
slice_closing_radius = 0.049
slicing_mode = regular
small_perimeter_speed = 50
solid_infill_acceleration = 0
solid_infill_below_area = 10
solid_infill_every_layers = 0
solid_infill_extruder = 1
solid_infill_extrusion_width = 0
solid_infill_speed = 220
spiral_vase = 0
staggered_inner_seams = 0
standby_temperature_delta = -5
support_material = 0
support_material_angle = 0
support_material_auto = 1
support_material_bottom_contact_distance = 0
support_material_bottom_interface_layers = -1
support_material_buildplate_only = 0
support_material_closing_radius = 2
support_material_contact_distance = 0.2
support_material_enforce_layers = 0
support_material_extruder = 1
support_material_extrusion_width = 0
support_material_interface_contact_loops = 0
support_material_interface_extruder = 1
support_material_interface_layers = 2
support_material_interface_pattern = rectilinear
support_material_interface_spacing = 0.5
support_material_interface_speed = 80
support_material_pattern = rectilinear
support_material_spacing = 2.5
support_material_speed = 150
support_material_style = grid
support_material_synchronize_layers = 0
support_material_threshold = 30
support_material_with_sheath = 0
support_material_xy_spacing = 0.35
support_tree_angle = 40
support_tree_angle_slow = 25
support_tree_branch_diameter = 2
support_tree_branch_diameter_angle = 5
support_tree_branch_diameter_double_wall = 3
support_tree_branch_distance = 1
support_tree_tip_diameter = 0.8
support_tree_top_rate = 15%
thick_bridges = 1
thin_walls = 1
threads = 12
top_fill_pattern = monotoniclines
top_infill_extrusion_width = 0
top_solid_infill_acceleration = 2000
top_solid_infill_speed = 200
top_solid_layers = 4
top_solid_min_thickness = 0
travel_acceleration = 0
travel_speed = 500
travel_speed_z = 10
wall_distribution_count = 1
wall_transition_angle = 10
wall_transition_filter_deviation = 25%
wall_transition_length = 100%
wipe_tower = 0
wipe_tower_bridging = 10
wipe_tower_brim_width = 2
wipe_tower_cone_angle = 0
wipe_tower_extra_spacing = 100%
wipe_tower_extruder = 0
wipe_tower_no_sparse_layers = 0
wipe_tower_rotation_angle = 0
wipe_tower_width = 40
wipe_tower_x = 180
wipe_tower_y = 140
xy_size_compensation = 0

# Print preset
[print:0.12mm Extra High]
inherits = *common*
bottom_solid_layers = 5
gap_fill_speed = 350
infill_speed = 430
layer_height = 0.12
overhang_speed_0 = 20
overhang_speed_1 = 20
overhang_speed_2 = 30
overhang_speed_3 = 60
perimeter_speed = 350
solid_infill_speed = 320
top_solid_layers = 6

[print:0.16mm High]
inherits = *common*
bottom_solid_layers = 4
gap_fill_speed = 300
infill_speed = 330
layer_height = 0.16
overhang_speed_0 = 20
overhang_speed_1 = 20
overhang_speed_2 = 30
overhang_speed_3 = 60
solid_infill_speed = 270
top_solid_layers = 5

[print:0.20mm Fine]
inherits = *common*

[print:0.25mm Quick]
inherits = *common*
gap_fill_speed = 230
infill_speed = 220
layer_height = 0.25
perimeter_speed = 230
solid_infill_speed = 230

# Common filament preset
[filament:*common*]
advance_pressure = 0.031
bed_temperature = 60
bridge_fan_speed = 100
compatible_printers = 
compatible_printers_condition = 
compatible_prints = 
compatible_prints_condition = 
cooling = 1
disable_fan_first_layers = 1
enable_advance_pressure = 1
enable_auxiliary_fan = 100
enable_dynamic_fan_speeds = 0
enable_volume_fan = 100
end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
extrusion_multiplier = 0.98
fan_always_on = 1
fan_below_layer_time = 60
filament_colour = #3399FF
filament_cooling_final_speed = 3.4
filament_cooling_initial_speed = 2.2
filament_cooling_moves = 4
filament_cost = 0
filament_density = 1.24
filament_deretract_speed = nil
filament_diameter = 1.75
filament_load_time = 0
filament_loading_speed = 28
filament_loading_speed_start = 3
filament_max_volumetric_speed = 21
filament_minimal_purge_on_wipe_tower = 15
filament_notes = ""
filament_property_drying_box = nil
filament_property_anneal_temperature = nil
filament_property_water_resistance = weak
filament_property_corrosion_resistance = weak
filament_property_creep_resistance = weak
filament_property_hdt_045 = 57
filament_property_hdt_180 = 0
filament_property_tensile_strength = 39±3
filament_property_tensile_modulus = 4650±150
filament_property_elongation_at_break = 12.5±2.5
filament_property_flexural_strength = 72.5±2.5
filament_property_flexural_modulus = 2850±150
filament_property_notch_impact_strength = 6±2
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
filament_retract_before_travel = nil
filament_retract_before_wipe = nil
filament_retract_layer_change = nil
filament_retract_length = nil
filament_retract_lift = nil
filament_retract_lift_above = nil
filament_retract_lift_below = nil
filament_retract_restart_extra = nil
filament_retract_speed = nil
filament_settings_id = PrusaSlicer_cf_pro.ini
filament_soluble = 0
filament_spool_weight = 0
filament_toolchange_delay = 0
filament_type = PLA
filament_unload_time = 0
filament_unloading_speed = 90
filament_unloading_speed_start = 100
filament_vendor = QIDI
filament_wipe = nil
first_layer_bed_temperature = 60
first_layer_temperature = 210
first_layer_volume_temperature = 0
full_fan_speed_layer = 0
idle_temperature = 100
inherits = 
max_fan_speed = 100
min_fan_speed = 100
min_print_speed = 20
overhang_fan_speed_0 = 0
overhang_fan_speed_1 = 0
overhang_fan_speed_2 = 0
overhang_fan_speed_3 = 0
slowdown_below_layer_time = 5
smooth_time = 0.03
start_filament_gcode = "; Filament gcode\n"
temperature = 220
volume_temperature = 0

# QIDI filament preset
[filament:*QIDI ABS Rapido*]
inherits = *common*
advance_pressure = 0.021
bed_temperature = 100
enable_auxiliary_fan = 0
enable_volume_fan = 0
extrusion_multiplier = 0.95
filament_colour = #FFC800
filament_density = 1.02
filament_max_volumetric_speed = 22
filament_property_water_resistance = fine
filament_property_creep_resistance = strong
filament_property_hdt_045 = 85
filament_property_tensile_strength = 41±1
filament_property_tensile_modulus = 3850±150
filament_property_elongation_at_break = 11±1
filament_property_flexural_strength = 77.5±2.5
filament_property_flexural_modulus = 2700±100
filament_property_notch_impact_strength = 20±2
filament_type = ABS
first_layer_bed_temperature = 100
first_layer_temperature = 250
max_fan_speed = 60
min_fan_speed = 60
temperature = 270
volume_temperature = 55

[filament:*QIDI ABS-GF*]
inherits = *common*
advance_pressure = 0.01
bed_temperature = 100
bridge_fan_speed = 0
enable_auxiliary_fan = 0
enable_volume_fan = 0
extrusion_multiplier = 0.95
filament_colour = #282828
filament_density = 1.15
filament_max_volumetric_speed = 17
filament_property_water_resistance = strong
filament_property_creep_resistance = strong
filament_property_hdt_045 = 97
filament_property_hdt_180 = 93
filament_property_tensile_strength = 48.48±0.61
filament_property_tensile_modulus = 3752.13±68.39
filament_property_elongation_at_break = 2.1±0.1
filament_property_flexural_strength = 78.8±1.26
filament_property_flexural_modulus = 3531.71±75.79
filament_property_notch_impact_strength = 8.91±0.63
filament_type = ABS-GF
first_layer_bed_temperature = 100
first_layer_temperature = 270
max_fan_speed = 20
min_fan_speed = 20
temperature = 270
volume_temperature = 55

[filament:*QIDI PA12-CF*]
inherits = *common*
advance_pressure = 0.01
bed_temperature = 80
bridge_fan_speed = 0
enable_auxiliary_fan = 0
extrusion_multiplier = 0.96
filament_colour = #696969
filament_density = 1.09
filament_max_volumetric_speed = 14
filament_property_drying_box = 15
filament_property_anneal_temperature = 80
filament_property_corrosion_resistance = fine
filament_property_hdt_045 = 149.6
filament_property_hdt_180 = 112.4
filament_property_tensile_strength = 87.49±2.81
filament_property_tensile_modulus = 5438.4±282.82
filament_property_elongation_at_break = 2.59±0.19
filament_property_flexural_strength = 133.17±4.66
filament_property_flexural_modulus = 4667.43±339.80
filament_property_notch_impact_strength = 6.11±1.45
filament_type = PA12-CF
first_layer_bed_temperature = 80
first_layer_temperature = 290
max_fan_speed = 15
min_fan_speed = 15
temperature = 290

[filament:*QIDI PAHT-CF*]
inherits = *common*
advance_pressure = 0.01
bed_temperature = 80
bridge_fan_speed = 0
enable_auxiliary_fan = 0
extrusion_multiplier = 0.96
filament_colour = #4F4F4F
filament_density = 1.20
filament_max_volumetric_speed = 15
filament_property_drying_box = 15
filament_property_anneal_temperature = 80
filament_property_water_resistance = fine
filament_property_corrosion_resistance = strong
filament_property_creep_resistance = strong
filament_property_hdt_045 = 192.3
filament_property_hdt_180 = 121.7
filament_property_tensile_strength = 104.9±1.99
filament_property_tensile_modulus = 8383.26±419.53
filament_property_elongation_at_break = 1.6±0.07
filament_property_flexural_strength = 147.7±4.09
filament_property_flexural_modulus = 5969.35±145.28
filament_property_notch_impact_strength = 6.17±0.2
filament_type = PAHT-CF
first_layer_bed_temperature = 80
first_layer_temperature = 310
max_fan_speed = 15
min_fan_speed = 15
temperature = 310

[filament:*QIDI PET-CF*]
inherits = *common*
advance_pressure = 0.01
bed_temperature = 80
bridge_fan_speed = 5
enable_auxiliary_fan = 0
extrusion_multiplier = 1
filament_colour = #323232
filament_density = 1.30
filament_max_volumetric_speed = 14
filament_property_drying_box = 15
filament_property_anneal_temperature = 80
filament_property_water_resistance = strong
filament_property_corrosion_resistance = strong
filament_property_creep_resistance = strong
filament_property_hdt_045 = 148.8
filament_property_hdt_180 = 112.1
filament_property_tensile_strength = 87.41±3.57
filament_property_tensile_modulus = 6025.53±355.46
filament_property_elongation_at_break = 1.99±0.18
filament_property_flexural_strength = 122.69±5.19
filament_property_flexural_modulus = 5313.21±197.89
filament_property_notch_impact_strength = 5.78±0.58
filament_type = PET-CF
first_layer_bed_temperature = 80
first_layer_temperature = 320
max_fan_speed = 10
min_fan_speed = 10
temperature = 320

[filament:*QIDI PETG-Tough*]
inherits = *common*
advance_pressure = 0.07
bed_temperature = 80
bridge_fan_speed = 60
enable_auxiliary_fan = 0
extrusion_multiplier = 0.95
filament_colour = #00FF40
filament_density = 1.24
filament_max_volumetric_speed = 16
filament_property_drying_box = 20
filament_property_water_resistance = strong
filament_property_corrosion_resistance = fine
filament_property_creep_resistance = strong
filament_property_hdt_045 = 78
filament_property_hdt_180 = 73
filament_property_tensile_strength = 40.3±0.6
filament_property_tensile_modulus = 1780±80
filament_property_elongation_at_break = 4.0±0.2
filament_property_flexural_strength = 62.8±0.4
filament_property_flexural_modulus = 1919±54
filament_property_notch_impact_strength = 13.9±2.3
filament_type = PETG
first_layer_bed_temperature = 80
first_layer_temperature = 240
max_fan_speed = 60
min_fan_speed = 60
temperature = 250

[filament:*QIDI PLA Rapido*]
inherits = *common*

[filament:*QIDI PLA Rapido Matte*]
inherits = *common*
filament_colour = #0073E6
filament_density = 1.42
filament_max_volumetric_speed = 22
filament_property_hdt_045 = 58
filament_property_tensile_modulus = 2400±200
filament_property_elongation_at_break = 3±1
filament_property_flexural_strength = 77.5±2.5
filament_property_flexural_modulus = 2200±200
filament_property_notch_impact_strength = 7.5±1.5

[filament:*QIDI UltraPA*]
inherits = *common*
advance_pressure = 0.03
bed_temperature = 80
bridge_fan_speed = 0
enable_auxiliary_fan = 0
extrusion_multiplier = 0.96
filament_colour = #FFEBCD
filament_density = 1.21
filament_max_volumetric_speed = 3.5
filament_property_drying_box = 15
filament_property_water_resistance = fine
filament_property_corrosion_resistance = fine
filament_property_creep_resistance = fine
filament_property_hdt_045 = 77.8
filament_property_hdt_180 = 73.1
filament_property_tensile_strength = 86.15±0.56
filament_property_tensile_modulus = 3609.22±153.31
filament_property_elongation_at_break = 11.68±3.36
filament_property_flexural_strength = 121.47±3.14
filament_property_flexural_modulus = 3314.03±181.88
filament_property_notch_impact_strength = 5.78±0.3
filament_type = UltraPA
first_layer_bed_temperature = 80
first_layer_temperature = 300
max_fan_speed = 20
min_fan_speed = 20
temperature = 300

# Generic filament preset
[filament:*Generic ABS*]
inherits = *common*
advance_pressure = 0.021
bed_temperature = 100
enable_auxiliary_fan = 0
enable_volume_fan = 0
extrusion_multiplier = 0.95
filament_colour = #FFFF00
filament_density = 1.04
filament_max_volumetric_speed = 17.5
filament_property_water_resistance = none
filament_property_corrosion_resistance = none
filament_property_creep_resistance = none
filament_property_hdt_045 = 0
filament_property_tensile_strength = 0
filament_property_tensile_modulus = 0
filament_property_elongation_at_break = 0
filament_property_flexural_strength = 0
filament_property_flexural_modulus = 0
filament_property_notch_impact_strength = 0
filament_type = ABS
filament_vendor = Generic
first_layer_bed_temperature = 100
first_layer_temperature = 250
max_fan_speed = 60
min_fan_speed = 60
temperature = 260

[filament:*Generic PETG*]
inherits = *common*
advance_pressure = 0.07
bed_temperature = 80
enable_auxiliary_fan = 0
extrusion_multiplier = 0.95
filament_colour = #00FF00
filament_density = 1.27
filament_max_volumetric_speed = 9
filament_property_water_resistance = none
filament_property_corrosion_resistance = none
filament_property_creep_resistance = none
filament_property_hdt_045 = 0
filament_property_tensile_strength = 0
filament_property_tensile_modulus = 0
filament_property_elongation_at_break = 0
filament_property_flexural_strength = 0
filament_property_flexural_modulus = 0
filament_property_notch_impact_strength = 0
filament_type = PETG
filament_vendor = Generic
first_layer_bed_temperature = 80
first_layer_temperature = 240
max_fan_speed = 60
min_fan_speed = 60
temperature = 250

[filament:*Generic PLA*]
inherits = *common*
filament_colour = #0000FF
filament_density = 1.20
filament_max_volumetric_speed = 17
filament_property_water_resistance = none
filament_property_corrosion_resistance = none
filament_property_creep_resistance = none
filament_property_hdt_045 = 0
filament_property_tensile_strength = 0
filament_property_tensile_modulus = 0
filament_property_elongation_at_break = 0
filament_property_flexural_strength = 0
filament_property_flexural_modulus = 0
filament_property_notch_impact_strength = 0
filament_vendor = Generic

[filament:*Generic TPU 95A*]
inherits = *common*
advance_pressure = 0.1
extrusion_multiplier = 1
filament_colour = #8000FF
filament_density = 1.21
filament_max_volumetric_speed = 6
filament_property_water_resistance = none
filament_property_corrosion_resistance = none
filament_property_creep_resistance = none
filament_property_hdt_045 = 0
filament_property_tensile_strength = 0
filament_property_tensile_modulus = 0
filament_property_elongation_at_break = 0
filament_property_flexural_strength = 0
filament_property_flexural_modulus = 0
filament_property_notch_impact_strength = 0
filament_type = TPU
filament_vendor = Generic
first_layer_temperature = 230
temperature = 230

# X-MAX 3 QIDI filament preset
[filament:QIDI ABS Rapido @X-MAX 3]
inherits = *QIDI ABS Rapido*
compatible_printers_condition = printer_model=="X-MAX 3"

[filament:QIDI ABS-GF @X-MAX 3]
inherits = *QIDI ABS-GF*
compatible_printers_condition = printer_model=="X-MAX 3"

[filament:QIDI PA12-CF @X-MAX 3]
inherits = *QIDI PA12-CF*
compatible_printers_condition = printer_model=="X-MAX 3"

[filament:QIDI PAHT-CF @X-Plus3]
inherits = *QIDI PAHT-CF*
compatible_printers_condition = printer_model=="X-MAX 3"

[filament:QIDI PET-CF @X-MAX 3]
inherits = *QIDI PET-CF*
compatible_printers_condition = printer_model=="X-MAX 3"

[filament:QIDI PETG-Tough @X-MAX 3]
inherits = *QIDI PETG-Tough*
compatible_printers_condition = printer_model=="X-MAX 3"

[filament:QIDI PLA Rapido @X-MAX 3]
inherits = *QIDI PLA Rapido*
compatible_printers_condition = printer_model=="X-MAX 3"

[filament:QIDI PLA Rapido Matte @X-MAX 3]
inherits = *QIDI PLA Rapido Matte*
compatible_printers_condition = printer_model=="X-MAX 3"

[filament:QIDI UltraPA @X-MAX 3]
inherits = *QIDI UltraPA*
compatible_printers_condition = printer_model=="X-MAX 3"

# X-MAX 3 Generic filament preset
[filament:Generic ABS @X-MAX 3]
inherits = *Generic ABS*
compatible_printers_condition = printer_model=="X-MAX 3"

[filament:Generic PETG @X-MAX 3]
inherits = *Generic PETG*
compatible_printers_condition = printer_model=="X-MAX 3"

[filament:Generic PLA @X-MAX 3]
inherits = *Generic PLA*
compatible_printers_condition = printer_model=="X-MAX 3"

[filament:Generic TPU 95A @X-MAX 3]
inherits = *Generic TPU 95A*
compatible_printers_condition = printer_model=="X-MAX 3"

# X-Plus 3 QIDI filament preset
[filament:QIDI ABS Rapido @X-Plus 3]
inherits = *QIDI ABS Rapido*
compatible_printers_condition = printer_model=="X-Plus 3"

[filament:QIDI ABS-GF @X-Plus 3]
inherits = *QIDI ABS-GF*
compatible_printers_condition = printer_model=="X-Plus 3"

[filament:QIDI PA12-CF @X-Plus 3]
inherits = *QIDI PA12-CF*
compatible_printers_condition = printer_model=="X-Plus 3"

[filament:QIDI PAHT-CF @X-Plus 3]
inherits = *QIDI PAHT-CF*
compatible_printers_condition = printer_model=="X-Plus 3"

[filament:QIDI PET-CF @X-Plus 3]
inherits = *QIDI PET-CF*
compatible_printers_condition = printer_model=="X-Plus 3"

[filament:QIDI PETG-Tough @X-Plus 3]
inherits = *QIDI PETG-Tough*
compatible_printers_condition = printer_model=="X-Plus 3"

[filament:QIDI PLA Rapido @X-Plus 3]
inherits = *QIDI PLA Rapido*
compatible_printers_condition = printer_model=="X-Plus 3"

[filament:QIDI PLA Rapido Matte @X-Plus 3]
inherits = *QIDI PLA Rapido Matte*
compatible_printers_condition = printer_model=="X-Plus 3"

[filament:QIDI UltraPA @X-Plus 3]
inherits = *QIDI UltraPA*
compatible_printers_condition = printer_model=="X-Plus 3"

# X-Plus 3 Generic filament preset
[filament:Generic ABS @X-Plus 3]
inherits = *Generic ABS*
compatible_printers_condition = printer_model=="X-Plus 3"

[filament:Generic PETG @X-Plus 3]
inherits = *Generic PETG*
compatible_printers_condition = printer_model=="X-Plus 3"

[filament:Generic PLA @X-Plus 3]
inherits = *Generic PLA*
compatible_printers_condition = printer_model=="X-Plus 3"

[filament:Generic TPU 95A @X-Plus 3]
inherits = *Generic TPU 95A*
compatible_printers_condition = printer_model=="X-Plus 3"

# X-smart 3 QIDI filament preset
[filament:QIDI ABS Rapido @X-smart 3]
inherits = *QIDI ABS Rapido*
compatible_printers_condition = printer_model=="X-smart 3"
advance_pressure = 0.024
filament_max_volumetric_speed = 20
volume_temperature = 0

[filament:QIDI PETG-Tough @X-smart 3]
inherits = *QIDI PETG-Tough*
compatible_printers_condition = printer_model=="X-smart 3"
advance_pressure = 0.048
filament_max_volumetric_speed = 14

[filament:QIDI PLA Rapido @X-smart 3]
inherits = *QIDI PLA Rapido*
compatible_printers_condition = printer_model=="X-smart 3"
filament_max_volumetric_speed = 19
slowdown_below_layer_time = 8

[filament:QIDI PLA Rapido Matte @X-smart 3]
inherits = *QIDI PLA Rapido Matte*
compatible_printers_condition = printer_model=="X-smart 3"
filament_max_volumetric_speed = 20
slowdown_below_layer_time = 8

# X-smart 3 Generic filament preset
[filament:Generic ABS @X-smart 3]
inherits = *Generic ABS*
compatible_printers_condition = printer_model=="X-smart 3"
advance_pressure = 0.024
filament_max_volumetric_speed = 15.5

[filament:Generic PETG @X-smart 3]
inherits = *Generic PETG*
compatible_printers_condition = printer_model=="X-smart 3"
advance_pressure = 0.048
filament_max_volumetric_speed = 8

[filament:Generic PLA @X-smart 3]
inherits = *Generic PLA*
compatible_printers_condition = printer_model=="X-smart 3"
filament_max_volumetric_speed = 15
slowdown_below_layer_time = 8

[filament:Generic TPU 95A @X-smart 3]
inherits = *Generic TPU 95A*
compatible_printers_condition = printer_model=="X-smart 3"
slowdown_below_layer_time = 8

# Common printer preset
[printer:*common*]
autoemit_temperature_commands = 1
bed_custom_model = 
bed_custom_texture = 
bed_shape = 0x0,325x0,325x325,0x325
before_layer_gcode = G92 E0
between_objects_gcode = 
color_change_gcode = M600
cooling_tube_length = 5
cooling_tube_retraction = 91.5
default_filament_profile = 
default_print_profile = 0.20mm Fine
deretract_speed = 0
end_gcode = M141 S0\nM104 S0\nM140 S0\nG1 E-3 F1800\nG91\nG0 Z5 F600\nG90\nG0 X0 Y0 F12000\n{if max_layer_z < max_print_height / 2}G1 Z{max_print_height / 2 + 10} F600{else}G1 Z{min(max_print_height, max_layer_z + 10)}{endif}
extra_loading_move = -2
extruder_colour = ""
extruder_offset = 0x0
gcode_flavor = klipper
high_current_on_filament_swap = 0
host_type = mainsail
inherits = 
layer_gcode = 
machine_limits_usage = time_estimate_only
machine_max_acceleration_e = 5000
machine_max_acceleration_extruding = 20000
machine_max_acceleration_retracting = 5000
machine_max_acceleration_travel = 1500
machine_max_acceleration_x = 20000
machine_max_acceleration_y = 20000
machine_max_acceleration_z = 500
machine_max_feedrate_e = 30
machine_max_feedrate_x = 600
machine_max_feedrate_y = 600
machine_max_feedrate_z = 10
machine_max_jerk_e = 2
machine_max_jerk_x = 9
machine_max_jerk_y = 9
machine_max_jerk_z = 3
machine_min_extruding_rate = 0
machine_min_travel_rate = 0
max_layer_height = 0
max_print_height = 315
min_layer_height = 0.08
nozzle_diameter = 0.4
parking_pos_retraction = 92
pause_print_gcode = M0
print_host = 
printer_model = 
printer_notes = 
printer_settings_id = 
printer_technology = FFF
printer_variant = 0.4
printer_vendor = 
printhost_apikey = 
printhost_cafile = 
remaining_times = 1
retract_before_travel = 1
retract_before_wipe = 0%
retract_layer_change = 1
retract_length = 1
retract_length_toolchange = 10
retract_lift = 0.4
retract_lift_above = 0
retract_lift_below = 0
retract_restart_extra = 0
retract_restart_extra_toolchange = 0
retract_speed = 30
silent_mode = 0
single_extruder_multi_material = 0
start_gcode = G28\nM141 S0\nG0 Z50 F600\nM190 S[first_layer_bed_temperature]\nG28 Z\nG29\nG0 X0 Y0 Z50 F6000\nM109 S[first_layer_temperature]\nM83\nG0 X{max((min(print_bed_max[0], first_layer_print_min[0] + 80) - 85),0)} Y{max((min(print_bed_max[1], first_layer_print_min[1] + 80) - 85),0)} Z5 F6000\nG0 Z0.2 F600\nG1 E3 F1800\nG1 X{(min(print_bed_max[0], first_layer_print_min[0] + 80))} E{85 * 0.04} F3000\nG1 Y{max((min(print_bed_max[1], first_layer_print_min[1] + 80) - 85),0) + 2} E{2 * 0.04} F3000\nG1 X{max((min(print_bed_max[0], first_layer_print_min[0] + 80) - 85),0)} E{85 * 0.04} F3000\nG1 Y{max((min(print_bed_max[1], first_layer_print_min[1] + 80) - 85),0) + 85} E{83 * 0.04} F3000\nG1 X{max((min(print_bed_max[0], first_layer_print_min[0] + 80) - 85),0) + 2} E{2 * 0.04} F3000\nG1 Y{max((min(print_bed_max[1], first_layer_print_min[1] + 80) - 85),0) + 5} E{80 * 0.04} F3000
template_custom_gcode = 
thumbnails = 
thumbnails_format = QIDI
toolchange_gcode = 
use_firmware_retraction = 0
use_relative_e_distances = 1
use_volumetric_e = 0
variable_layer_height = 1
wipe = 1
z_offset = 0

# X-MAX 3 preset
[printer:X-MAX 3]
inherits = *common*
printer_model = X-MAX 3
bed_shape = 0x0,325x0,325x325,0x325
default_filament_profile = QIDI PLA Rapido @X-MAX 3
max_print_height = 315
thumbnails = 380x380,210x210

# X-Plus 3 preset
[printer:X-Plus 3]
inherits = *common*
printer_model = X-Plus 3
bed_shape = 0x0,280x0,280x280,0x280
default_filament_profile = QIDI PLA Rapido @X-Plus 3
max_print_height = 270
thumbnails = 380x380,210x210

# X-smart 3 preset
[printer:X-smart 3]
inherits = *common*
printer_model = X-smart 3
bed_shape = 0x0,175x0,175x180,0x180
default_filament_profile = QIDI PLA Rapido @X-smart 3
max_print_height = 170
thumbnails = 205x205,140x140